summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-05-13random: insist on random_get_entropy() existing in order to simplifyJason A. Donenfeld
All platforms are now guaranteed to provide some value for random_get_entropy(). In case some bug leads to this not being so, we print a warning, because that indicates that something is really very wrong (and likely other things are impacted too). This should never be hit, but it's a good and cheap way of finding out if something ever is problematic. Since we now have viable fallback code for random_get_entropy() on all platforms, which is, in the worst case, not worse than jiffies, we can count on getting the best possible value out of it. That means there's no longer a use for using jiffies as entropy input. It also means we no longer have a reason for doing the round-robin register flow in the IRQ handler, which was always of fairly dubious value. Instead we can greatly simplify the IRQ handler inputs and also unify the construction between 64-bits and 32-bits. We now collect the cycle counter and the return address, since those are the two things that matter. Because the return address and the irq number are likely related, to the extent we mix in the irq number, we can just xor it into the top unchanging bytes of the return address, rather than the bottom changing bytes of the cycle counter as before. Then, we can do a fixed 2 rounds of SipHash/HSipHash. Finally, we use the same construction of hashing only half of the [H]SipHash state on 32-bit and 64-bit. We're not actually discarding any entropy, since that entropy is carried through until the next time. And more importantly, it lets us do the same sponge-like construction everywhere. Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-05-13Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four fixes, all in drivers. These patches mosly fix error legs and exceptional conditions (scsi_dh_alua, qla2xxx). The lpfc fixes are for coding issues with lpfc features" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE scsi: lpfc: Fix split code for FLOGI on FCoE scsi: qla2xxx: Fix missed DMA unmap for aborted commands scsi: scsi_dh_alua: Properly handle the ALUA transitioning state
2022-05-13Merge branch 'master' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2022-05-13 1) Cleanups for the code behind the XFRM offload API. This is a preparation for the extension of the API for policy offload. From Leon Romanovsky. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: drop not needed flags variable in XFRM offload struct net/mlx5e: Use XFRM state direction instead of flags netdevsim: rely on XFRM state direction instead of flags ixgbe: propagate XFRM offload state direction instead of flags xfrm: store and rely on direction to construct offload flags xfrm: rename xfrm_state_offload struct to allow reuse xfrm: delete not used number of external headers xfrm: free not used XFRM_ESP_NO_TRAILER flag ==================== Link: https://lore.kernel.org/r/20220513151218.4010119-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13sfc: siena: Fix Kconfig dependenciesRen Zhijie
If CONFIG_PTP_1588_CLOCK=m and CONFIG_SFC_SIENA=y, the siena driver will fail to link: drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_remove_channel': ptp.c:(.text+0xa28): undefined reference to `ptp_clock_unregister' drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_probe_channel': ptp.c:(.text+0x13a0): undefined reference to `ptp_clock_register' ptp.c:(.text+0x1470): undefined reference to `ptp_clock_unregister' drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_pps_worker': ptp.c:(.text+0x1d29): undefined reference to `ptp_clock_event' drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_siena_ptp_get_ts_info': ptp.c:(.text+0x301b): undefined reference to `ptp_clock_index' To fix this build error, make SFC_SIENA depends on PTP_1588_CLOCK. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: d48523cb88e0 ("sfc: Copy shared files needed for Siena (part 2)") Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220513012721.140871-1-renzhijie2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13drm/amdgpu: clean up some inconsistent indentingJiapeng Chong
Eliminate the follow smatch warning: drivers/gpu/drm/amd/amdgpu/nbio_v7_7.c:35 nbio_v7_7_get_rev_id() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/nbio_v7_7.c:214 nbio_v7_7_init_registers() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-13Merge tag 'hwmon-for-v5.18-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Restrict ltq-cputemp to SOC_XWAY to fix build failure - Add OF device ID table to tmp401 driver to enable auto-load * tag 'hwmon-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ltq-cputemp) restrict it to SOC_XWAY hwmon: (tmp401) Add OF device ID table
2022-05-13Merge tag 'drm-fixes-2022-05-13' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Pretty quiet week on the fixes front, 4 amdgpu and one i915 fix. I think there might be a few misc fbdev ones outstanding, but I'll see if they are necessary and pass them on if so. amdgpu: - Disable ASPM for VI boards on ADL platforms - S0ix DCN3.1 display fix - Resume regression fix - Stable pstate fix i915: - fix for kernel memory corruption when running a lot of OpenCL tests in parallel" * tag 'drm-fixes-2022-05-13' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2) Revert "drm/amd/pm: keep the BACO feature enabled for suspend" drm/i915: Fix race in __i915_vma_remove_closed drm/amd/display: undo clearing of z10 related function pointers drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems
2022-05-13PCI: hv: Fix synchronization between channel callback and hv_pci_bus_exit()Andrea Parri (Microsoft)
[ Similarly to commit a765ed47e4516 ("PCI: hv: Fix synchronization between channel callback and hv_compose_msi_msg()"): ] The (on-stack) teardown packet becomes invalid once the completion timeout in hv_pci_bus_exit() has expired and hv_pci_bus_exit() has returned. Prevent the channel callback from accessing the invalid packet by removing the ID associated to such packet from the VMbus requestor in hv_pci_bus_exit(). Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20220511223207.3386-3-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-05-13PCI: hv: Add validation for untrusted Hyper-V valuesAndrea Parri (Microsoft)
For additional robustness in the face of Hyper-V errors or malicious behavior, validate all values that originate from packets that Hyper-V has sent to the guest in the host-to-guest ring buffer. Ensure that invalid values cannot cause data being copied out of the bounds of the source buffer in hv_pci_onchannelcallback(). While at it, remove a redundant validation in hv_pci_generic_compl(): hv_pci_onchannelcallback() already ensures that all processed incoming packets are "at least as large as [in fact larger than] a response". Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20220511223207.3386-2-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-05-13drm/vmwgfx: Disable command buffers on svga3 without gbobjectsZack Rusin
With very limited vram on svga3 it's difficult to handle all the surface migrations. Without gbobjects, i.e. the ability to store surfaces in guest mobs, there's no reason to support intermediate svga2 features, especially because we can fall back to fb traces and svga3 will never support those in-between features. On svga3 we wither want to use fb traces or screen targets (i.e. gbobjects), nothing in between. This fixes presentation on a lot of fusion/esxi tech previews where the exposed svga3 caps haven't been finalized yet. Signed-off-by: Zack Rusin <zackr@vmware.com> Fixes: 2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3") Cc: <stable@vger.kernel.org> # v5.14+ Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-5-zack@kde.org
2022-05-13drm/vmwgfx: Initialize drm_mode_fb_cmd2Zack Rusin
Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags and modifiers which were never initialized. Garbage in those members can cause random failures during the bringup of the fbcon. Initializing the structure fixes random blank screens after bootup due to flags/modifiers mismatches during the fbcon bring up. Fixes: dabdcdc9822a ("drm/vmwgfx: Switch to mode_cmd2") Signed-off-by: Zack Rusin <zackr@vmware.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org
2022-05-13drm/vmwgfx: Fix fencing on SVGAv3Zack Rusin
Port of the vmwgfx to SVGAv3 lacked support for fencing. SVGAv3 removed FIFO's and replaced them with command buffers and extra registers. The initial version of SVGAv3 lacked support for most advanced features (e.g. 3D) which made fences unnecessary. That is no longer the case, especially as 3D support is being turned on. Switch from FIFO commands and capabilities to command buffers and extra registers to enable fences on SVGAv3. Fixes: 2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3") Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-5-zack@kde.org
2022-05-13zram: remove double compression logicAlexey Romanov
The 2nd trial allocation under per-cpu presumption has been used to prevent regression of allocation failure. However, it makes trouble for maintenance without significant benefit. The slowpath branch is executed extremely rarely: getting there is problematic. Therefore, we delete this branch. Since b09ab054b69b ("zram: support BDI_CAP_STABLE_WRITES"), zram has used QUEUE_FLAG_STABLE_WRITES to prevent buffer change between 1st and 2nd memory allocations. Since we remove second trial memory allocation logic, we could remove the STABLE_WRITES flag because there is no change buffer to be modified under us. Link: https://lkml.kernel.org/r/20220505094443.11728-1-avromanov@sberdevices.ru Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru> Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Acked-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13drivers: virtio_mem: use pageblock size as the minimum virtio_mem size.Zi Yan
alloc_contig_range() now only needs to be aligned to pageblock_nr_pages, drop virtio_mem size requirement that it needs to be MAX_ORDER_NR_PAGES. Link: https://lkml.kernel.org/r/20220425143118.2850746-7-zi.yan@sent.com Signed-off-by: Zi Yan <ziy@nvidia.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand <david@redhat.com> Cc: Eric Ren <renzhengeek@gmail.com> Cc: kernel test robot <lkp@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13mmap locking API: fix missed mmap_sem references in commentsFlorian Rommel
Commit c1e8d7c6a7a6 ("mmap locking API: convert mmap_sem comments") missed replacing some references of mmap_sem by mmap_lock due to misspelling (mm_sem instead of mmap_sem). Link: https://lkml.kernel.org/r/20220503113333.214124-1-mail@florommel.de Signed-off-by: Florian Rommel <mail@florommel.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13printk: stop including cache.h from printk.hPeter Collingbourne
An inclusion of cache.h in printk.h was added in 2014 in commit c28aa1f0a847 ("printk/cache: mark printk_once test variable __read_mostly") in order to bring in the definition of __read_mostly. The usage of __read_mostly was later removed in commit 3ec25826ae33 ("printk: Tie printk_once / printk_deferred_once into .data.once for reset") which made the inclusion of cache.h unnecessary, so remove it. We have a small amount of code that depended on the inclusion of cache.h from printk.h; fix that code to include the appropriate header. This fixes a circular inclusion on arm64 (linux/printk.h -> linux/cache.h -> asm/cache.h -> linux/kasan-enabled.h -> linux/static_key.h -> linux/jump_label.h -> linux/bug.h -> asm/bug.h -> linux/printk.h) that would otherwise be introduced by the next patch. Build tested using {allyesconfig,defconfig} x {arm64,x86_64}. Link: https://linux-review.googlesource.com/id/I8fd51f72c9ef1f2d6afd3b2cbc875aa4792c1fba Link: https://lkml.kernel.org/r/20220427195820.1716975-1-pcc@google.com Signed-off-by: Peter Collingbourne <pcc@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13Merge tag 'icc-5.18-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Pull interconnect fixes from Georgi: "interconnect fixes for v5.18-rc This contains an additional fix for sc7180 and sdx55 platforms that helps them to enter suspend even on devices that don't have the most recent DT changes. - interconnect: Restore sync state by ignoring ipa-virt in provider count Signed-off-by: Georgi Djakov <djakov@kernel.org>" * tag 'icc-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: Restore sync state by ignoring ipa-virt in provider count
2022-05-13media: h264: Avoid wrapping long_term_frame_idxNicolas Dufresne
For long term references, frame_num is set to long_term_frame_idx which does not require wrapping. This is fixed by observation, no directly related issue have been found yet. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: v4l2-mem2mem: Trace on implicit un-holdNicolas Dufresne
If the timestamp of the src buffer differs from the timestamp of a held dst buffer, the held buffer is implicitly removed and marked as done. Add a trace to help debugging if someone hits that case. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: add h264 decoder driver for mt8186Yunfei Dong
Add h264 decode driver to support mt8186. For the architecture is single core, need to add new interface to decode. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: Support MT8186Yunfei Dong
Adds MT8186's compatible "mediatek,mt8186-vcodec-dec". Adds MT8186's device private data mtk_vdec_single_core_pdata. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: prevent kernel crash when rmmod mtk-vcodec-dec.koYunfei Dong
If the driver support subdev mode, the parameter "dev->pm.dev" will be NULL in mtk_vcodec_dec_remove. Kernel will crash when try to rmmod mtk-vcodec-dec.ko. [ 4380.702726] pc : do_raw_spin_trylock+0x4/0x80 [ 4380.707075] lr : _raw_spin_lock_irq+0x90/0x14c [ 4380.711509] sp : ffff80000819bc10 [ 4380.714811] x29: ffff80000819bc10 x28: ffff3600c03e4000 x27: 0000000000000000 [ 4380.721934] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 [ 4380.729057] x23: ffff3600c0f34930 x22: ffffd5e923549000 x21: 0000000000000220 [ 4380.736179] x20: 0000000000000208 x19: ffffd5e9213e8ebc x18: 0000000000000020 [ 4380.743298] x17: 0000002000000000 x16: ffffd5e9213e8e90 x15: 696c346f65646976 [ 4380.750420] x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000040 [ 4380.757542] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 4380.764664] x8 : 0000000000000000 x7 : ffff3600c7273ae8 x6 : ffffd5e9213e8ebc [ 4380.771786] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 [ 4380.778908] x2 : 0000000000000000 x1 : ffff3600c03e4000 x0 : 0000000000000208 [ 4380.786031] Call trace: [ 4380.788465] do_raw_spin_trylock+0x4/0x80 [ 4380.792462] __pm_runtime_disable+0x2c/0x1b0 [ 4380.796723] mtk_vcodec_dec_remove+0x5c/0xa0 [mtk_vcodec_dec] [ 4380.802466] platform_remove+0x2c/0x60 [ 4380.806204] __device_release_driver+0x194/0x250 [ 4380.810810] driver_detach+0xc8/0x15c [ 4380.814462] bus_remove_driver+0x5c/0xb0 [ 4380.818375] driver_unregister+0x34/0x64 [ 4380.822288] platform_driver_unregister+0x18/0x24 [ 4380.826979] mtk_vcodec_dec_driver_exit+0x1c/0x888 [mtk_vcodec_dec] [ 4380.833240] __arm64_sys_delete_module+0x190/0x224 [ 4380.838020] invoke_syscall+0x48/0x114 [ 4380.841760] el0_svc_common.constprop.0+0x60/0x11c [ 4380.846540] do_el0_svc+0x28/0x90 [ 4380.849844] el0_svc+0x4c/0x100 [ 4380.852975] el0t_64_sync_handler+0xec/0xf0 [ 4380.857148] el0t_64_sync+0x190/0x194 [ 4380.860801] Code: 94431515 17ffffca d503201f d503245f (b9400004) Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: support stateless VP9 decodingYunfei Dong
Add support for VP9 decoding using the stateless API, as supported by MT8192. And the drivers is lat and core architecture. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: George Sun <george.sun@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: support stateless VP8 decodingYunfei Dong
Add support for VP8 decoding using the stateless API, as supported by MT8192. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: support stateless H.264 decoding for mt8192Yunfei Dong
Adds h264 lat and core architecture driver for mt8192, and the decode mode is frame based for stateless decoder. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: Extract H264 common codeYunfei Dong
Mt8192 can use some of common code with mt8183. Moves them to a new file in order to reuse. [hverkuil: replaced memcpy_toio by memcpy, was left over from a prev version] Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: record capture queue format typeYunfei Dong
The capture queue format type may be differ depending on platform: for stateless decoder drivers, we need to calculate the capture buffer size according to the capture queue format type in SCP. As a preparation for introducing drivers for stateless decoding, save the current capture queue type on a per vcodec context basis. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: Fix v4l2-compliance failYunfei Dong
Need to use default pic info when get pic info fail. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Steve Cho <stevecho@chromium.org> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: disable vp8 4K capabilityYunfei Dong
For vp8 not support 4K, need to disable it. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: Add format to support MT21CYunfei Dong
Needs to use mediatek compressed mode for mt8192 decoder. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: Getting supported decoder format typesYunfei Dong
Getting supported output and capture queue format types according to decoder capability. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: Refactor supported vdec formats and framesizesYunfei Dong
Supported output and capture format types for mt8192 are different with mt8183. Redefine parameters to store them. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: Refactor get and put capture buffer flowYunfei Dong
For lat and core decode in parallel, need to get capture buffer when core start to decode and put capture buffer to display list when core decode done. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13spi: spi-cadence: Update ISR status variable type to irqreturn_tAmit Kumar Mahapatra
Data type of status variable, that hold the return value of the ISR, should be irqreturn_t & not u32. This patch updates status variable type to irqreturn_t. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Link: https://lore.kernel.org/r/20220512145025.20205-1-amit.kumar-mahapatra@xilinx.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-13media: mediatek: vcodec: set each plane bytesused in buf prepareYunfei Dong
call vb2_set_plane_payload to set each plane bytesused in buf prepare, need not to set independently for stateless and statefull architectures. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: Read max resolution from dec_capabilityYunfei Dong
Supported max resolution for different platforms are not the same: 2K or 4K, getting it according to dec_capability. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Tzung-Bi Shih<tzungbi@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: get capture queue buffer size from scpYunfei Dong
Different capture buffer format has different buffer size, need to get real buffer size according to buffer type from scp. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: Using firmware type to separate different firmware ↵Yunfei Dong
architecture MT8173 platform use vpu firmware, mt8183/mt8192 will use scp firmware instead, using chip name is not reasonable to separate different firmware architecture. Using firmware type is much better. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Tzung-Bi Shih<tzungbi@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: Add vdec enable/disable hardware helpersYunfei Dong
Lock, power and clock are highly coupled operations. Adds vdec enable/disable hardware helpers and uses them. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Tzung-Bi Shih<tzungbi@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: mediatek: vcodec: Fix v4l2 compliance decoder cmd test failYunfei Dong
Will return -EINVAL using standard framework api when test stateless decoder with cmd VIDIOC_(TRY)DECODER_CMD. Disable them to adjust v4l2 compliance test for user driver(GStreamer/Chrome) won't use decoder cmd. Fixes: 8cdc3794b2e3 ("media: mtk-vcodec: vdec: support stateless API") Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13Merge tag 'v5.18-next-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/soc mmsys: - add SW reset to MT8192 - add support for MT8195 pmic wrapper: - update binding description needed for future MT8195 support mutex: - add support for MT8195 cmdq helper: - remove legacy callback * tag 'v5.18-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: mutex: remove mt8195 MOD0 and SOF0 definition dt-bindings: pwrap: mediatek: Update pwrap document for mt8195 soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0 soc: mediatek: add mtk-mutex support for mt8195 vdosys0 soc: mediatek: add mtk-mmsys support for mt8195 vdosys0 soc: mediatek: cmdq: Use mailbox rx_callback instead of cmdq_task_cb dt-bindings: arm: mediatek: mmsys: add mt8195 SoC binding dt-bindings: arm: mediatek: mmsys: add power and gce properties soc: mediatek: mmsys: Add sw0_rst_offset for MT8192 Link: https://lore.kernel.org/r/6412eecf-a4c3-cf06-55ff-9df8b0656d21@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-13bnxt_en: parse and report result field when NVRAM package install failsKalesh AP
Instead of always returning -ENOPKG, decode the firmware error code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails. Return a more suitable error code to userspace and log an error in dmesg. This is version 2 of the earlier patch that was reverted: 02acd399533e ("bnxt_en: parse result field when NVRAM package install fails") In this new version, if the call is made through devlink instead of ethtool, we'll also set the error message in extack. Link: https://lore.kernel.org/netdev/20220307141358.4d52462e@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13bnxt_en: Enable packet timestamping for all RX packetsPavan Chebbi
Add driver support to enable timestamping on all RX packets that are received by the NIC. This capability can be requested by the applications using SIOCSHWTSTAMP ioctl with filter type HWTSTAMP_FILTER_ALL. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13bnxt_en: Configure ptp filters during bnxt openPavan Chebbi
For correctness, we need to configure the packet filters for timestamping during bnxt_open. This way they are always configured after firmware reset or chip reset. We should not assume that the filters will always be retained across resets. This patch modifies the ioctl handler and always configures the PTP filters in the bnxt_open() path. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13bnxt_en: Update firmware interface to 1.10.2.95Michael Chan
The main changes are timestamp support for all RX packets and new PCIe statistics. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13platform/chrome: Add ChromeOS ACPI device driverEnric Balletbo i Serra
The x86 Chromebooks have the ChromeOS ACPI device. This driver attaches to the ChromeOS ACPI device and exports the values reported by ACPI in a sysfs directory. This data isn't present in ACPI tables when read through ACPI tools, hence a driver is needed to do it. The driver gets data from firmware using the ACPI component of the kernel. The ACPI values are presented in string form (numbers as decimal values) or binary blobs, and can be accessed as the contents of the appropriate read only files in the standard ACPI device's sysfs directory tree. This data is consumed by the ChromeOS user space. Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://lore.kernel.org/r/Yn4OKYrtV35Dv+nd@debian-BULLSEYE-live-builder-AMD64
2022-05-13dma-buf: ensure unique directory name for dmabuf statsCharan Teja Kalla
The dmabuf file uses get_next_ino()(through dma_buf_getfile() -> alloc_anon_inode()) to get an inode number and uses the same as a directory name under /sys/kernel/dmabuf/buffers/<ino>. This directory is used to collect the dmabuf stats and it is created through dma_buf_stats_setup(). At current, failure to create this directory entry can make the dma_buf_export() to fail. Now, as the get_next_ino() can definitely give a repetitive inode no causing the directory entry creation to fail with -EEXIST. This is a problem on the systems where dmabuf stats functionality is enabled on the production builds can make the dma_buf_export(), though the dmabuf memory is allocated successfully, to fail just because it couldn't create stats entry. This issue we are able to see on the snapdragon system within 13 days where there already exists a directory with inode no "122602" so dma_buf_stats_setup() failed with -EEXIST as it is trying to create the same directory entry. To make the dentry name as unique, use the dmabuf fs specific inode which is based on the simple atomic variable increment. There is tmpfs subsystem too which relies on its own inode generation rather than relying on the get_next_ino() for the same reason of avoiding the duplicate inodes[1]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/patch/?id=e809d5f0b5c912fe981dce738f3283b2010665f0 Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com> Cc: <stable@vger.kernel.org> # 5.15.x+ Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1652441296-1986-1-git-send-email-quic_charante@quicinc.com Signed-off-by: Christian König <christian.koenig@amd.com>
2022-05-13net: axienet: Use NAPI for TX completion pathRobert Hancock
This driver was using the TX IRQ handler to perform all TX completion tasks. Under heavy TX network load, this can cause significant irqs-off latencies (found to be in the hundreds of microseconds using ftrace). This can cause other issues, such as overrunning serial UART FIFOs when using high baud rates with limited UART FIFO sizes. Switch to using a NAPI poll handler to perform the TX completion work to get this out of hard IRQ context and avoid the IRQ latency impact. A separate poll handler is used for TX and RX since they have separate IRQs on this controller, so that the completion work for each of them stays on the same CPU as the interrupt. Testing on a Xilinx MPSoC ZU9EG platform using iperf3 from a Linux PC through a switch at 1G link speed showed no significant change in TX or RX throughput, with approximately 941 Mbps before and after. Hard IRQ time in the TX throughput test was significantly reduced from 12% to below 1% on the CPU handling TX interrupts, with total hard+soft IRQ CPU usage dropping from about 56% down to 48%. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: axienet: Be more careful about updating tx_bd_tailRobert Hancock
The axienet_start_xmit function was updating the tx_bd_tail variable multiple times, with potential rollbacks on error or invalid intermediate positions, even though this variable is also used in the TX completion path. Use READ_ONCE where this variable is read and WRITE_ONCE where it is written to make this update more atomic, and move the write before the MMIO write to start the transfer, so it is protected by that implicit write barrier. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13Bluetooth: btmtksdio: fix the reset takes too longSean Wang
Sending WMT command during the reset in progress is invalid and would get no response from firmware until the reset is complete, so we ignore the WMT command here to resolve the issue which causes the whole reset process taking too long. Fixes: 8fafe702253d ("Bluetooth: mt7921s: support bluetooth reset mechanism") Co-developed-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-09-15 10:45:08 +0000