summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-09-19bnxt_en: Use RSS flags defined in the bnxt_hsi.h file.Michael Chan
And remove redundant definitions of the same flags. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20irqchip/gicv3: Silence noisy DEBUG_PER_CPU_MAPS warningJames Morse
gic_raise_softirq() walks the list of cpus using for_each_cpu(), it calls gic_compute_target_list() which advances the iterator by the number of CPUs in the cluster. If gic_compute_target_list() reaches the last CPU it leaves the iterator pointing at the last CPU. This means the next time round the for_each_cpu() loop cpumask_next() will be called with an invalid CPU. This triggers a warning when built with CONFIG_DEBUG_PER_CPU_MAPS: [ 3.077738] GICv3: CPU1: found redistributor 1 region 0:0x000000002f120000 [ 3.077943] CPU1: Booted secondary processor [410fd0f0] [ 3.078542] ------------[ cut here ]------------ [ 3.078746] WARNING: CPU: 1 PID: 0 at ../include/linux/cpumask.h:121 gic_raise_softirq+0x12c/0x170 [ 3.078812] Modules linked in: [ 3.078869] [ 3.078930] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc5+ #5188 [ 3.078994] Hardware name: Foundation-v8A (DT) [ 3.079059] task: ffff80087a1a0080 task.stack: ffff80087a19c000 [ 3.079145] PC is at gic_raise_softirq+0x12c/0x170 [ 3.079226] LR is at gic_raise_softirq+0xa4/0x170 [ 3.079296] pc : [<ffff0000083ead24>] lr : [<ffff0000083eac9c>] pstate: 200001c9 [ 3.081139] Call trace: [ 3.081202] Exception stack(0xffff80087a19fbe0 to 0xffff80087a19fd10) [ 3.082269] [<ffff0000083ead24>] gic_raise_softirq+0x12c/0x170 [ 3.082354] [<ffff00000808e614>] smp_send_reschedule+0x34/0x40 [ 3.082433] [<ffff0000080e80a0>] resched_curr+0x50/0x88 [ 3.082512] [<ffff0000080e89d0>] check_preempt_curr+0x60/0xd0 [ 3.082593] [<ffff0000080e8a60>] ttwu_do_wakeup+0x20/0xe8 [ 3.082672] [<ffff0000080e8bb8>] ttwu_do_activate+0x90/0xc0 [ 3.082753] [<ffff0000080ea9a4>] try_to_wake_up+0x224/0x370 [ 3.082836] [<ffff0000080eabc8>] default_wake_function+0x10/0x18 [ 3.082920] [<ffff000008103134>] __wake_up_common+0x5c/0xa0 [ 3.083003] [<ffff0000081031f4>] __wake_up_locked+0x14/0x20 [ 3.083086] [<ffff000008103f80>] complete+0x40/0x60 [ 3.083168] [<ffff00000808df7c>] secondary_start_kernel+0x15c/0x1d0 [ 3.083240] [<00000000808911a4>] 0x808911a4 [ 3.113401] Detected PIPT I-cache on CPU2 Avoid updating the iterator if the next call to cpumask_next() would cause the for_each_cpu() loop to exit. There is no change to gic_raise_softirq()'s behaviour, (cpumask_next()s eventual call to _find_next_bit() will return early as start >= nbits), this patch just silences the warning. Fixes: 021f653791ad ("irqchip: gic-v3: Initial support for GICv3") Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1474306155-3303-1-git-send-email-james.morse@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-19Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "20 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: rapidio/rio_cm: avoid GFP_KERNEL in atomic context Revert "ocfs2: bump up o2cb network protocol version" ocfs2: fix start offset to ocfs2_zero_range_for_truncate() cgroup: duplicate cgroup reference when cloning sockets mm: memcontrol: make per-cpu charge cache IRQ-safe for socket accounting ocfs2: fix double unlock in case retry after free truncate log fanotify: fix list corruption in fanotify_get_response() fsnotify: add a way to stop queueing events on group shutdown ocfs2: fix trans extend while free cached blocks ocfs2: fix trans extend while flush truncate log ipc/shm: fix crash if CONFIG_SHMEM is not set mm: fix the page_swap_info() BUG_ON check autofs: use dentry flags to block walks during expire MAINTAINERS: update email for VLYNQ bus entry mm: avoid endless recursion in dump_page() mm, thp: fix leaking mapped pte in __collapse_huge_page_swapin() khugepaged: fix use-after-free in collapse_huge_page() MAINTAINERS: Maik has moved ocfs2/dlm: fix race between convert and migration mem-hotplug: don't clear the only node in new_node_page()
2016-09-19rapidio/rio_cm: avoid GFP_KERNEL in atomic contextAlexandre Bounine
As reported by Alexey Khoroshilov (https://lkml.org/lkml/2016/9/9/737): riocm_send_close() is called from rio_cm_shutdown() under spin_lock_bh(idr_lock), but riocm_send_close() uses a GFP_KERNEL allocation. Fix by taking riocm_send_close() outside of spinlock protected code. [akpm@linux-foundation.org: remove unneeded `if (!list_empty())'] Link: http://lkml.kernel.org/r/20160915175402.10122-1-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-19Merge tag 'drm-fixes-for-4.8-rc7' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull exynos and one stable ABI fix from Dave Airlie: "One important drm 32/64 ABI fix came in so I'll dequeue what I have, the rest is just exynos runtime pm fixes, but the net removal of code seems like a win to me. I'm going to be sporadic this week due to school holidays, so if anything urgent turns up, Daniel will take care of it" * tag 'drm-fixes-for-4.8-rc7' of git://people.freedesktop.org/~airlied/linux: drm: Only use compat ioctl for addfb2 on X86/IA64 Subject: [PATCH, RESEND] drm: exynos: avoid unused function warning drm/exynos: g2d: fix system and runtime pm integration drm/exynos: rotator: fix system and runtime pm integration drm/exynos: gsc: fix system and runtime pm integration drm/exynos: fimc: fix system and runtime pm integration exynos-drm: Fix unsupported GEM memory type error message to be clear
2016-09-19Bluetooth: hci_uart: Add Marvell supportLoic Poulain
This patch introduces support for Marvell Bluetooth controller over UART (8897 for now). In order to send the final firmware at full speed, a helper firmware is firstly sent. Firmware download is driven by the controller which sends request firmware packets (including expected size). This driver is a global rework of the one proposed by Amitkumar Karwar <akarwar@marvell.com>. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: hci_uart: Add Nokia Protocol identifierLoic Poulain
Will be used by hci_nokia extra protocol. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: hci_bcm: Change protocol nameLoic Poulain
Use full name instead of abbreviation. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btrtl: Add RTL8822BE Bluetooth deviceLarry Finger
The RTL8822BE is a new Realtek wifi and BT device. Support for the BT part is hereby added. As this device is similar to most of the other Realtek BT devices, the changes are minimal. The main difference is that the 8822BE needs a configuration file for enabling and disabling features. Thus code is added to select and load this configuration file. Although not needed at the moment, hooks are added for the other devices that might need such configuration files. One additional change is to the routine that tests that the project ID contained in the firmware matches the hardware. As the project IDs are not sequential, continuing to use the position in the array as the expected value of the ID would require adding extra unused entries in the table, and any subsequant rearrangment of the array would break the code. To fix these problems, the array elements now contain both the hardware ID and the expected value for the project ID. Signed-off-by: 陆朱伟 <alex_lu@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btqca: remove null checks on edl->data as it is an arrayColin Ian King
edl->data is an array of __u8 so the null check is unneccessary, so remove it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19fakelb: fix schedule while atomicAlexander Aring
This patch changes the spinlock to mutex for the available fakelb phy list. When holding the spinlock the ieee802154_unregister_hw is called which holding the rtnl_mutex, in that case we get a "BUG: sleeping function called from invalid context" error. We simple change the spinlock to mutex which allows to hold the rtnl lock there. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btusb: Mark CW6622 devices to have broken link key commandsSzymon Janc
Conwise CW6622 seems to have a problem with the stored link key commands so just mark it as broken. < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 > HCI Event: Command Complete (0x0e) plen 12 Read Local Supported Features (0x04|0x0003) ncmd 1 status 0x00 Features: 0xff 0x3e 0x85 0x38 0x18 0x18 0x00 0x00 < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 > HCI Event: Command Complete (0x0e) plen 12 Read Local Version Information (0x04|0x0001) ncmd 1 status 0x00 HCI Version: 2.0 (0x3) HCI Revision: 0x1f4 LMP Version: 2.0 (0x3) LMP Subversion: 0x1f4 Manufacturer: CONWISE Technology Corporation Ltd (66) ... < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 status 0x00 Commands: 7fffef03cedfffffffffff1ff20ff8ff3f ... < HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 bdaddr 00:00:00:00:00:00 all 1 > HCI Event: Command Complete (0x0e) plen 8 Read Stored Link Key (0x03|0x000d) ncmd 1 status 0x11 max 0 num 0 Error: Unsupported Feature or Parameter Value Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar
The workqueue "workqueue" queues multiple work items viz &qca->ws_awake_rx &qca->ws_rx_vote_off, &qca->ws_awake_device, &qca->ws_tx_vote_off which require strict execution ordering. Hence, an ordered dedicated workqueue has been used to replace the deprecated create_singlethread_workqueue instance. WQ_MEM_RECLAIM has not been set since the driver is not being used on a memory reclaim path. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: add WCNSS dependency for HCI driverArnd Bergmann
The newly added bluetooth driver is based on the soc-specific support, but lacks the obvious compile-time dependency on that: drivers/bluetooth/btqcomsmd.o: In function `btqcomsmd_probe': btqcomsmd.c:(.text.btqcomsmd_probe+0x40): undefined reference to `qcom_wcnss_open_channel' btqcomsmd.c:(.text.btqcomsmd_probe+0x5c): undefined reference to `qcom_wcnss_open_channel' Makefile:969: recipe for target 'vmlinux' failed Fixes: 90c107dc8b2c ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: bcm203x: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btusb: Add support for 0cf3:e009Kai-Heng Feng
Device 0cf3:e009 is one of the QCA ROME family. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e009 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btusb, hci_intel: Fix wait_on_bit_timeout() return value checksBart Van Assche
wait_on_bit_timeout() returns one of the following three values: * 0 to indicate success. * -EINTR to indicate that a signal has been received; * -EAGAIN to indicate timeout; Make the wait_on_bit_timeout() callers check for these values. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driverBjorn Andersson
The Qualcomm WCNSS chip provides two SMD channels to the BT core; one for command and one for event packets. This driver exposes the two channels as a hci device. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19nvdimm: fix PHYS_PFN/PFN_PHYS mixupOliver O'Halloran
nd_activate_region() iomaps any hint addresses required when activating a region. To prevent duplicate mappings it checks the PFN of the hint to be mapped against the PFNs of the already mapped hints. Unfortunately it doesn't convert the PFN back into a physical address before passing it to devm_nvdimm_ioremap(). Instead it applies PHYS_PFN a second time which ends about as well as you would imagine. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-19[media] cx23885/saa7134: assign q->dev to the PCI deviceHans Verkuil
Fix a regression caused by commit 2bc46b3ad3c1 ("[media] media/pci: convert drivers to use the new vb2_queue dev field"). Three places where q->dev should be set were missed, causing a WARN. Fixes: 2bc46b3ad3c1 ("[media] media/pci: convert drivers to use the new vb2_queue dev field"). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Marton Balint <cus@passwd.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19can: flexcan: fix resume functionFabio Estevam
On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-09-19mtd: nand: mxc: fix obiwan error in mxc_nand_v[12]_ooblayout_free() functionsLothar Waßmann
commit a894cf6c5a82 ("mtd: nand: mxc: switch to mtd_ooblayout_ops") introduced a regression accessing the OOB area from the mxc_nand driver due to an Obiwan error in the mxc_nand_v[12]_ooblayout_free() functions. They report a bogus oobregion { 64, 7 } which leads to errors accessing bogus data when reading the oob area. Prior to the commit the mtd-oobtest module could be run without any errors. With the offending commit, this test fails with results like: |Running mtd-oobtest | |================================================= |mtd_oobtest: MTD device: 5 |mtd_oobtest: MTD device size 524288, eraseblock size 131072, page size 2048, count of eraseblocks 4, pages per eraseblock 64, OOB size 64 |mtd_test: scanning for bad eraseblocks |mtd_test: scanned 4 eraseblocks, 0 are bad |mtd_oobtest: test 1 of 5 |mtd_oobtest: writing OOBs of whole device |mtd_oobtest: written up to eraseblock 0 |mtd_oobtest: written 4 eraseblocks |mtd_oobtest: verifying all eraseblocks |mtd_oobtest: error @addr[0x0:0x19] 0x9a -> 0x78 diff 0xe2 |mtd_oobtest: error @addr[0x0:0x1a] 0xcc -> 0x0 diff 0xcc |mtd_oobtest: error @addr[0x0:0x1b] 0xe0 -> 0x85 diff 0x65 |mtd_oobtest: error @addr[0x0:0x1c] 0x60 -> 0x62 diff 0x2 |mtd_oobtest: error @addr[0x0:0x1d] 0x69 -> 0x45 diff 0x2c |mtd_oobtest: error @addr[0x0:0x1e] 0xcd -> 0xa0 diff 0x6d |mtd_oobtest: error @addr[0x0:0x1f] 0xf2 -> 0x60 diff 0x92 |mtd_oobtest: error: verify failed at 0x0 [...] Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Fixes: a894cf6c5a82 ("mtd: nand: mxc: switch to mtd_ooblayout_ops") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-19mtd: nand: fix chances to create incomplete ECC data when writingRogerCC Lin
When mtk_nfc_do_write_page() comparing the sector number,because the sector number field is at the 12th-bit position of NFI_BYTELEN register,the masked register should be shifted 12 bits before being compared.The result of this bug may cause the second subpage has incomplete ECC parity bytes. Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com> Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-19mtd: nand: fix generating over-boundary ECC data when writingRogerCC Lin
When mtk_ecc_encode() is writing the ECC parity data to the OOB region,because each register is 4 bytes in length,but the len's unit is in bytes,the operation in the for loop will cross the ECC's boundary. Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com> Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-19iwlwifi: pcie: use LIST_HEAD() macroJohannes Berg
There's no need to declare a list and then init it manually, just use the LIST_HEAD() macro. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: use LIST_HEAD() macroJohannes Berg
There's no need to declare a list and then init it manually, just use the LIST_HEAD() macro. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: set HCMD_NAME for PHY_DB as wellSara Sharon
Currently it is logged as UNKNOWN. Also, 0x6c seems to be the permanent ID for this command, remove incorrect comment and uncomment the command from the commands list. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: Add mem debugfs entryIdo Yariv
In order to access cached/paged memory, there are a couple of firmware commands (one for UMAC and one for LMAC) that let the host access memory and registers indirectly. Since this is done by the firmware on behalf of the host, even if memory is paged out or cached, the host will retrieve the memory as the firmware sees it (paged out memory will get paged in). Export this mechanism via a debugfs entry for both read and write access. WARNING: This mechanism has no protections at all. Invalid addresses may crash or hang the firmware. Writing to arbitrary memory also comes with no guarantees. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: move AP-specific code to right functionJohannes Berg
There's no need for the common MAC context function to have an if on AP mode, the values can be overridden in the AP-specific function later. Clean that up by adding the full command as a new parameter to the AP-specific function, and doing it there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: add new 8265 series PCI IDOren Givon
Add a new PCI ID for the 8265 series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: Add debugfs function for clocks diffRoee Zamir
New function, reveals the diff between gp2 and host time. Signed-off-by: Roee Zamir <roee.zamir@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19drm: Only use compat ioctl for addfb2 on X86/IA64Kristian H. Kristensen
Similar to struct drm_update_draw, struct drm_mode_fb_cmd2 has an unaligned 64 bit field (modifier). This get packed differently between 32 bit and 64 bit modes on architectures that can handle unaligned 64 bit access (X86 and IA64). Other architectures pack the structs the same and don't need the compat wrapper. Use the same condition for drm_mode_fb_cmd2 as we use for drm_update_draw. Note that only the modifier will be packed differently between compat and non-compat versions. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org> [seanpaul added not at bottom of commit msg re: modifier] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1473801645-116011-1-git-send-email-hoegsberg@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-09-19iwlwifi: migrate to devm_* APISharon Dvir
Change PCIE and trans resource allocations to managed resources. Signed-off-by: Sharon Dvir <sharon.dvir@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: disable P2P queue on mac context releaseSara Sharon
AP queue is properly released, but P2P queue isn't. Fixes: commit 4c965139a3cd ("iwlwifi: mvm: support p2p device frames tx on dqa queue #2") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: don't export trace points that are used in iwlwifi onlyEmmanuel Grumbach
This can save a few bytes Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: document passing unexpected Block Ack Request framesJohannes Berg
When we get an unexpected Block Ack Request frame, the BAID from the hardware will be invalid, and we'll pass it to mac80211 for further handling (sending a delBA action frame.) Add a comment explaining that, in case anyone looks in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: move to wide ID for all commandsSara Sharon
Due to firmware design considerations, move to wide ID for all commands. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: make iwl_mvm_update_sta() an inlineJohannes Berg
There's no point in making this an out-of-line function since it just calls a single other function with a few changed parameters. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: pcie: log full command sequenceSara Sharon
Log group as well. Remove 0x prefix to match TX logging. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: move BIOS MCC retrieval to common codeArik Nemtsov
This will be used by more than MVM, so move it to iwlwifi While at it, rename WRD_METHOD to the more appropriate WRDD_METHOD and add some documentation. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: support packet injectionSara Sharon
For automatic testing packet injection can be useful. Support injection through debugfs. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: Add support for RRM by scanAvrahams Stern
Implement support for RRM by adding an option to configure the scan dwell time and reporting scan start time and BSS detection time, and Advertise support for these features. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: support BAR in reorder bufferSara Sharon
On default queue we will not receive frame release notification, but the BAR itself. Upon receiving the BAR driver should look at the NSSN and adjust window accordingly. Fixes: b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: fix DQA AP mode station assumptionSara Sharon
There was recently a Full AP mode feature added where hostap adds the station at auth stage, and not assoc. However, when running with legacy hostapd, we get the auth response before station was added, and tx_skb_non_sta fails to allocate a queue, resulting in a complete failure of association. Take care of this situation as well. Add a warning when no valid queue is returned at all and make mvm drop the packet instead of passing it on. Refactor the function a bit while at it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: check for valid ethernet address provided by OEMHaim Dreyfuss
In 9000 family products we added an option to let the OEM fuse the mac address via registers. If these registers are zeroed we use the OTP address instead. Make sure that the address provided by the OEM is valid and, if not, fall back to the OTP address as well. Fixes: commit 17c867bfe89b ("iwlwifi: add support for getting HW address from CSR") Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: add support for MU-MIMO air snifferAviya Erenfeld
enable MU-MIMO air sniffer if it's supported by the NIC Signed-off-by: Aviya Erenfeld <aviya.erenfeld@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: compare full command IDJohannes Berg
When comparing command IDs, the group should be taken into account so the same command/notification from a different group doesn't trigger anything unexpected. Fix this by comparing to the wide ID. Fixes: commit 1738d60b31d7 ("iwlwifi: mvm: handle RX MPDUs separately") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: cleanup skb queue functions useSara Sharon
Use skb_queue_empty() and not skb_peek_tail() to check for empty list. Avoid a redundant check as well - loop will take care of it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: pcie: fix typo in struct name for a000 devicesSara Sharon
commit 3cd1980b0cdf ("iwlwifi: pcie: introduce new tfd and tb formats") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: remove variable shadowingLiad Kaufman
Variable "ac" defined twice. Fix that. Fixes: commit 93f436e2c7fe ("iwlwifi: mvm: set sta_id in SCD_QUEUE_CONFIG cmd") Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2025-09-16 09:29:21 +0000