summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-09-11net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_all()Kamal Heib
mlx4_en_dcbnl_set_all() returns u8, so return value can't be negative in case of failure. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Rana Shahout <ranas@mellanox.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-11net: dsa: bcm_sf2: Get VLAN_PORT_MASK from b53_deviceFlorian Fainelli
While migrating the bcm_sf2 driver to use b53_common, we left a small piece untouched where we kept our local copy of the per-port port_vlan_ctl bitmask value. This value is now maintained by b53_device so we need to use it instead of our local (and now stale) copy of it. Fixes: f458995b9ad8 ("net: dsa: bcm_sf2: Utilize core B53 driver when possible") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-11nvme: make NVME_RDMA depend on BLOCKLinus Torvalds
Commit aa71987472a9 ("nvme: fabrics drivers don't need the nvme-pci driver") removed the dependency on BLK_DEV_NVME, but the cdoe does depend on the block layer (which used to be an implicit dependency through BLK_DEV_NVME). Otherwise you get various errors from the kbuild test robot random config testing when that happens to hit a configuration with BLOCK device support disabled. Cc: Christoph Hellwig <hch@lst.de> Cc: Jay Freyensee <james_p_freyensee@linux.intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-11Merge tag 'staging-4.8-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull IIO fixes from Greg KH: "Here are a few small IIO fixes for 4.8-rc6. Nothing major, full details are in the shortlog, all of these have been in linux-next with no reported issues" * tag 'staging-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio:core: fix IIO_VAL_FRACTIONAL sign handling iio: ensure ret is initialized to zero before entering do loop iio: accel: kxsd9: Fix scaling bug iio: accel: bmc150: reset chip at init time iio: fix pressure data output unit in hid-sensor-attributes tools:iio:iio_generic_buffer: fix trigger-less mode
2016-09-11Merge tag 'usb-4.8-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB gadget, phy, and xhci fixes for 4.8-rc6. All of these resolve minor issues that have been reported, and all have been in linux-next with no reported issues" * tag 'usb-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase xhci: fix null pointer dereference in stop command timeout function usb: dwc3: pci: fix build warning on !PM_SLEEP usb: gadget: prevent potenial null pointer dereference on skb->len usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition usb: phy: phy-generic: Check clk_prepare_enable() error usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CON Revert "usb: dwc3: gadget: always decrement by 1"
2016-09-10net: flow: Remove FLOWI_FLAG_L3MDEV_SRC flagDavid Ahern
No longer used Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: l3mdev: remove get_rtable methodDavid Ahern
No longer used Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: ipv6: Remove l3mdev_get_saddr6David Ahern
No longer needed Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: ipv4: Remove l3mdev_get_saddrDavid Ahern
No longer needed Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: vrf: Flip IPv6 output path from FIB lookup hook to out hookDavid Ahern
Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: vrf: Flip IPv4 output path from FIB lookup hook to out hookDavid Ahern
Flip the IPv4 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv4 output processing to send the packet to the VRF driver on xmit. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10ATM-ZeitNet: Fix indentation for one DPRINTK() call in start_rx()Markus Elfring
Adjust the indentation for a call of the macro "DPRINTK" in this function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10ATM-ZeitNet: Replace one kzalloc() call by kcalloc()Markus Elfring
* The script "checkpatch.pl" can point information out like the following. WARNING: Prefer kcalloc over kzalloc with multiply Thus fix the affected source code place. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. * Delete the local variable "size" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10ATM-ZeitNet: Improve a size determination in zatm_open()Markus Elfring
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10ATM-ZeitNet: Use kmalloc_array() in start_tx()Markus Elfring
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10ATM-nicstar: Refactor a dev_alloc_skb() call in dequeue_rx()Markus Elfring
The script "checkpatch.pl" can point out that assignments should usually not be performed within condition checks. Thus move an assignment for a local variable to a separate statement in this function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10ATM-nicstar: Refactor a kmalloc() call in ns_init_card()Markus Elfring
* The script "checkpatch.pl" can point out that assignments should usually not be performed within condition checks. Thus move an assignment for a local variable to a separate statement in this function. * Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10ATM-nicstar: Improve another size determination in ns_init_card()Markus Elfring
Replace the specification of a data structure by a reference for a field in a local variable as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10ATM-nicstar: Improve another size determination in get_scq()Markus Elfring
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10ATM-nicstar: Use kmalloc_array() in get_scq()Markus Elfring
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10Revert "hv_netvsc: make inline functions static"Stephen Hemminger
These functions are used by other code misc-next tree. This reverts commit 30d1de08c87ddde6f73936c3350e7e153988fe02. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/mlx5: Organize device list API in one placeMohamad Haj Yahia
Hide the exposed (external) mlx5_dev_list and mlx5_intf_mutex and expose an organized modular API to manage and manipulate mlx5 devices list. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/mlx5e: Restore vlan filter after seamless resetMohamad Haj Yahia
When detaching the mlx5e interface clear all the vlans rules from the vlan flow table. When attaching it back restore all the active vlans rules to the HW. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/mlx5e: Implement mlx5e interface attach/detach callbacksMohamad Haj Yahia
Needed to support seamless and lightweight PCI/Internal error recovery. Implement the attach/detach interface callbacks. In attach callback we only allocate HW resources. In detach callback we only deallocate HW resources. All SW/kernel objects initialzing/destroying is kept in add/remove callbacks. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/mlx5: Implement vports admin state backup/restoreMohamad Haj Yahia
Save the user configuration in the vport sturct. Restore saved old configuration upon vport enable. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/mlx5: Align sriov/eswitch modules with the new load/unload flow.Mohamad Haj Yahia
Init/cleanup sriov/eswitch in the core software context init/cleanup flows. Attach/detach sriov/eswitch in the core load/unload flows. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/mlx5: Implement eswitch attach/detach flowsMohamad Haj Yahia
Needed for lightweight and modular internal/pci error handling. Implement eswitch attach function which allocates/starts hw related resources. Implement eswitch detach function which releases/stops hw related resources. Init/cleanup function only handle eswitch software context allocation and destruction. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/mlx5: Implement SRIOV attach/detach flowsMohamad Haj Yahia
Needed for lightweight and modular internal/pci error handling. Implement sriov attach function which enables pre-saved number of vfs on the device side. Implement sriov detach function which disable the current vfs on the device side. Init/cleanup function only handles sriov software context allocation and destruction. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/mlx5: Split the load/unload flow into hardware and software flowsMohamad Haj Yahia
Gather all software context creating/destroying in one function and call it once in the first load and in the last unload. load/unload functions will now receive indication if we need to create/destroy the software contexts. In internal/pci error do the unload/load flows without releasing the software objects. In this way we perserve the sw core state and it help us restoring old driver state after PCI error/shutdown. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/mlx5: Introduce attach/detach to interface APIMohamad Haj Yahia
Add attach/detach callbacks to interface API. This is crucial for implementing seamless reset flow which releases the hardware and it's resources upon detach while keeping software structures and state (e.g netdev) then reset and reallocate the hardware needed resources upon attach. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/mlx5: SRIOV core code refactoringMohamad Haj Yahia
Simplify the code and makes it look modular and symmetric. Split sriov enable/disable to two levels: device level and pci level. When user enable/disable sriov (via sriov_configure driver callback) we will enable/disable both device and pci sriov. When driver load/unload we will enable/disable (on demand) only device sriov while keeping the PCI sriov enabled for next driver load. On internal/pci error, VFs will be kept enabled on PCI and the reset is done only in device level. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/mlx5: Skip waiting for vf pages in internal errorMohamad Haj Yahia
In case of device in internal error state there is no need to wait for vf pages since they will be reclaimed manually later in the unload flow. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: fs_enet: make rx_copybreak value configurableChristophe Leroy
Measurement shows that on a MPC8xx running at 132MHz, the optimal limit is 112: * 114 bytes packets are processed in 147 TB ticks with higher copybreak * 114 bytes packets are processed in 148 TB ticks with lower copybreak * 128 bytes packets are processed in 154 TB ticks with higher copybreak * 128 bytes packets are processed in 148 TB ticks with lower copybreak * 238 bytes packets are processed in 172 TB ticks with higher copybreak * 238 bytes packets are processed in 148 TB ticks with lower copybreak However it might be different on other processors and/or frequencies. So it is useful to make it configurable. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: fs_enet: don't unmap DMA when packet len is below copybreakChristophe Leroy
When the length of the packet is below the defined copybreak limit, the received packet is copied into a newly allocated skb in order to reuse the skb. This is only interesting if it allow us to avoid a new DMA mapping. We shall therefore not DMA unmap and remap the skb->data. Instead, we invalidate the cache with dma_sync_single_for_cpu() once the received data has been copied into the new skb. The following measures have been obtained on a mpc885 running at 132Mhz. Measurement is done using the timebase with packets sent to the target with 'ping -s 1' (packet len is 60): * Without this patch: 182 TB ticks * With this patch: 143 TB ticks As a comparison, if we set the copybreak limit to 0, then we get 148 TB ticks. It means that without this patch, duration is even worse when copying received data to a new skb instead of allocating a new skb for next packet to be received Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: fs_enet: merge NAPI RX and NAPI TXChristophe Leroy
Initially, a NAPI TX routine has been implemented separately from NAPI RX, as done on the freescale/gianfar driver. By merging NAPI RX and NAPI TX, we reduce the amount of TX completion interrupts. Handling of the budget in association with TX interrupts is based on indications provided at https://wiki.linuxfoundation.org/networking/napi We never proceed more than the complete TX ring on a single run. At the same time, we fix an issue in the handling of fep->tx_free: It is only when fep->tx_free goes up to MAX_SKB_FRAGS that we need to wake up the queue. There is no need to call netif_wake_queue() at every packet successfully transmitted. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: ethernet: renesas: sh_eth: add POST registers for rzChris Brandt
Due to a mistake in the hardware manual, the FWSLC and POST1-4 registers were not documented and left out of the driver for RZ/A making the CAM feature non-operational. Additionally, when the offset values for POST1-4 are left blank, the driver attempts to set them using an offset of 0xFFFF which can cause a memory corruption or panic. This patch fixes the panic and properly enables CAM. Reported-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/ip_tunnels: Introduce tunnel_id_to_key32() and key32_to_tunnel_id()Amir Vadai
Add utility functions to convert a 32 bits key into a 64 bits tunnel and vice versa. These functions will be used instead of cloning code in GRE and VXLAN, and in tc act_iptunnel which will be introduced in a following patch in this patchset. Signed-off-by: Amir Vadai <amir@vadai.me> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10Input: silead_gsl1680 - use "silead/" prefix for firmware loadingHans de Goede
The silead touch-controller ICs use a different firmware per digitizer / tablet model. So there are going to be quite a few of then and they really should be under a separate subdir. This commit prefixes the default firmware names with "silead/" just like we are already doing for devicetree specified firmware names. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-10Input: silead_gsl1680 - document firmware-name, fix implementationHans de Goede
The driver has supported touchscreen-fw-name to specify the firmware to load since it has been merged, but this was omitted from the dt-binding documentation. During review of adding touchscreen-fw-name to the binding documentation it was brought up that there is a standard property name called "firmware-name" for this, which should be used. Since there are no users of touchscreen-fw-name yet, this commit adds documentation of "firmware-name" to the dt-binding documentation and switches the driver over to use this. This commit also makes the driver add a "silead/" prefix to the firmware name from dt before calling request_firmware. That the firmware files are stored under /lib/firmware/silead under Linux is an implementation detail and does not belong in devicetree. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-10Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "nvdimm fixes for v4.8, two of them are tagged for -stable: - Fix devm_memremap_pages() to use track_pfn_insert(). Otherwise, DAX pmd mappings end up with an uncached pgprot, and unusable performance for the device-dax interface. The device-dax interface appeared in 4.7 so this is tagged for -stable. - Fix a couple VM_BUG_ON() checks in the show_smaps() path to understand DAX pmd entries. This fix is tagged for -stable. - Fix a mis-merge of the nfit machine-check handler to flip the polarity of an if() to match the final version of the patch that Vishal sent for 4.8-rc1. Without this the nfit machine check handler never detects / inserts new 'badblocks' entries which applications use to identify lost portions of files. - For test purposes, fix the nvdimm_clear_poison() path to operate on legacy / simulated nvdimm memory ranges. Without this fix a test can set badblocks, but never clear them on these ranges. - Fix the range checking done by dax_dev_pmd_fault(). This is not tagged for -stable since this problem is mitigated by specifying aligned resources at device-dax setup time. These patches have appeared in a next release over the past week. The recent rebase you can see in the timestamps was to drop an invalid fix as identified by the updated device-dax unit tests [1]. The -mm touches have an ack from Andrew" [1]: "[ndctl PATCH 0/3] device-dax test for recent kernel bugs" https://lists.01.org/pipermail/linux-nvdimm/2016-September/006855.html * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm: allow legacy (e820) pmem region to clear bad blocks nfit, mce: Fix SPA matching logic in MCE handler mm: fix cache mode of dax pmd mappings mm: fix show_smap() for zone_device-pmd ranges dax: fix mapping size check
2016-09-10Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Mostly driver bugfixes, but also a few cleanups which are nice to have out of the way" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rk3x: Restore clock settings at resume time i2c: Spelling s/acknowedge/acknowledge/ i2c: designware: save the preset value of DW_IC_SDA_HOLD Documentation: i2c: slave-interface: add note for driver development i2c: mux: demux-pinctrl: run properly with multiple instances i2c: bcm-kona: fix inconsistent indenting i2c: rcar: use proper device with dma_mapping_error i2c: sh_mobile: use proper device with dma_mapping_error i2c: mux: demux-pinctrl: invalidate properly when switching fails
2016-09-09ATM-iphase: Use kmalloc_array() in tx_init()Markus Elfring
* Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of data types by pointer dereferences to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09alx: add module parameter to enable msi-x supportTobias Regnery
msi-x support is default disabled in the alx driver. In order to test msi-x interrupts for regressions add a module parameter to the driver. Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09alx: add msi-x supportTobias Regnery
Add msi-x support to the alx driver. This is in preparation for multi queue support. msi-x interrupts are disabled by default because without multi queue support there is no advantage over msi interrupts. The performance numbers observed with iperf stay the same. Based on information of the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09alx: factor out part of the interrupt handlerTobias Regnery
Factor out the handling of misc interrupts into a new function. This function can be reused later for msi-x interrupts. Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09alx: refactor msi enablement and disablementTobias Regnery
Introduce a new flag field for the advanced interrupt capatibilities and add new functions to enable and disable msi interrupts. These functions will be extended later to cover msi-x interrupts. We enable msi interrupts earlier in alx_init_intr because with msi-x and multi queue support the number of queues must be set before we allocate resources for the rx and tx paths. Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctlKarl Beldan
This fixes subpage writes when using 4-bit HW ECC. There has been numerous reports about ECC errors with devices using this driver for a while. Also the 4-bit ECC has been reported as broken with subpages in [1] and with 16 bits NANDs in the driver and in mach* board files both in mainline and in the vendor BSPs. What I saw with 4-bit ECC on a 16bits NAND (on an LCDK) which got me to try reinitializing the ECC engine: - R/W on whole pages properly generates/checks RS code - try writing the 1st subpage only of a blank page, the subpage is well written and the RS code properly generated, re-reading the same page the HW detects some ECC error, reading the same page again no ECC error is detected Note that the ECC engine is already reinitialized in the 1-bit case. Tested on my LCDK with UBI+UBIFS using subpages. This could potentially get rid of the issue workarounded in [1]. [1] 28c015a9daab ("mtd: davinci-nand: disable subpage write for keystone-nand") Fixes: 6a4123e581b3 ("mtd: nand: davinci_nand, 4-bit ECC for smallpage") Cc: <stable@vger.kernel.org> Signed-off-by: Karl Beldan <kbeldan@baylibre.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-09-09qed: mark symbols static where possibleBaoyou Xie
We get a few warnings when building kernel with W=1: drivers/net/ethernet/qlogic/qed/qed_l2.c:112:5: warning: no previous prototype for 'qed_sp_vport_start' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:110:6: warning: no previous prototype for 'qed_iov_is_valid_vfid' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:188:5: warning: no previous prototype for 'qed_iov_post_vf_bulletin' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:578:6: warning: no previous prototype for 'qed_iov_set_vfs_to_disable' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:1135:28: warning: no previous prototype for 'qed_iov_get_public_vf_info' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:1148:6: warning: no previous prototype for 'qed_iov_clean_vf' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:2444:5: warning: no previous prototype for 'qed_iov_chk_ucast' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:2762:5: warning: no previous prototype for 'qed_iov_vf_flr_cleanup' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09drivers: net: phy: mdio-xgene: Add hardware dependencyJean Delvare
The mdio-xgene driver is only useful on X-Gene SoC. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Iyappan Subramanian <isubramanian@apm.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09ATM-ForeRunnerHE: Use kmalloc_array() in he_init_group()Markus Elfring
* Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of data types by pointer dereferences to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-21 08:04:10 +0000