| Age | Commit message (Collapse) | Author |
|---|
|
Update the cursor image via damage handling in-place. The cursor's
double buffering has no visible effect on the output, so remove it.
Done in preparation of switching ast to GEM SHMEM helpers. Removing
double buffering will allow us to use the same data structure for
primary and cursor plane.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-5-tzimmermann@suse.de
|
|
There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from ast.
On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in ast. It's also too late, as the atomic_check() of
the added planes will not be called before the commit.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-4-tzimmermann@suse.de
|
|
Always call drm_atomic_helper_check_plane_state() in each plane's
atomic_check function. At the minimum, it needs to set or clear the
plane state's 'visible' field. Otherwise the plane-state handling
is bogus and would keep updating planes that have been disabled.
While at it, also warn if the primary plane has been enabled, but is
not visible. This cannot legally happen as the plane always covers
the entire screen.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-3-tzimmermann@suse.de
|
|
Hold I/O-register lock in atomic_commit_tail to protect all pipeline
updates at once. Protects modesetting against concurrent EDID reads.
Complex modesetting operations involve mode changes and plane updates.
These steps used to be protected individually against concurrent I/O.
Make all this atomic wrt to reading display modes via EDID. The EDID
code in the connector's get_modes helper already acquires the necessary
lock.
A similar issue was fixed in commit 2d70b9a1482e ("drm/mgag200: Acquire
I/O-register lock in atomic_commit_tail function") for mgag200.
v2:
* fix typo in commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-2-tzimmermann@suse.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert the attempt to distribute spare resources to unconfigured
hotplug bridges at boot time.
This fixed some dock hot-add scenarios, but Jonathan Cameron reported
that it broke a topology with a multi-function device where one
function was a Switch Upstream Port and the other was an Endpoint"
* tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Distribute available resources for root buses, too"
|
|
Commit 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead
of smp_processor_id() to avoid crash") fixed an issue related to using
smp_processor_id() in preemptible context by replacing it with a pair
of get_cpu()/put_cpu(), but what is needed there really is any online
CPU and not necessarily the one currently running the code. Arguably,
getting the one that's running the code in there is confusing.
For this reason, simply give the control CPU role to the first online
one which automatically will be CPU0 if it is online, so one check
can be dropped from the code for an added benefit.
Link: https://lore.kernel.org/linux-pm/20221011113646.GA12080@duo.ucw.cz/
Fixes: 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
|
|
Enable the mac_managed_pm configuration in the phylink_config
structure to avoid the kernel warning during system resume.
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The recent commit
'commit 744d23c71af3 ("net: phy: Warn about incorrect
mdio_bus_phy_resume() state")'
requires the MAC driver explicitly tell the phy driver who is
managing the PM, otherwise you will see warning during resume
stage.
Add a boolean property in the phylink_config structure so that
the MAC driver can use it to tell the PHY driver if it wants to
manage the PM.
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "burst" string is only initialized for CONFIG_SPARC. It should be
set to "64" because that's what is used by PCI.
Fixes: 24cddbc3ef11 ("sunhme: Combine continued messages")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When RX strap in HW is not set to MODE 3 or 4, bit 7 and 8 in CF4
register should be set. The former is already handled in
dp83867_config_init; add the latter in SGMII specific initialization.
Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
memcpy: detected field-spanning write (size 168) of single field "(void *)&request->response_msg + (sizeof(struct rndis_message) - sizeof(union rndis_message_container)) + sizeof(*req_id)" at drivers/net/hyperv/rndis_filter.c:338 (size 40)
RSP: 0018:ffffc90000144de0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881766b4000 RCX: 0000000000000000
RDX: 0000000000000102 RSI: 0000000000009ffb RDI: 00000000ffffffff
RBP: ffffc90000144e38 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffc90000144c48 R11: ffffffff82f56ac8 R12: ffff8881766b403c
R13: 00000000000000a8 R14: ffff888100b75000 R15: ffff888179301d00
FS: 0000000000000000(0000) GS:ffff8884d6280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f8b024c418 CR3: 0000000176548001 CR4: 00000000003706e0
Call Trace:
<IRQ>
? _raw_spin_unlock_irqrestore+0x27/0x50
netvsc_poll+0x556/0x940 [hv_netvsc]
__napi_poll+0x2e/0x170
net_rx_action+0x299/0x2f0
__do_softirq+0xed/0x2ef
__irq_exit_rcu+0x9f/0x110
irq_exit_rcu+0xe/0x20
sysvec_hyperv_callback+0xb0/0xd0
</IRQ>
<TASK>
asm_sysvec_hyperv_callback+0x1b/0x20
RIP: 0010:native_safe_halt+0xb/0x10
Fixes: A warning triggered when the response message len exceeds
the size of rndis_message. Inside the rndis_request structure
these fields are however followed by a RNDIS_EXT_LEN padding
so it is safe to use unsafe_memcpy.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Cezar Bulinaru <cbulinaru@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Changing a VF's mac address through the VF (rather than via the PF)
fails with EPERM because the latter part of efx_ef10_set_mac_address
attempts to change the vport mac address list as the VF.
Even with this fixed it still fails with EBUSY because the vadaptor
is still assigned on the VF - the vadaptor reassignment must be within
a section where the VF has torn down its state.
A major reason this has broken is because we have two functions that
ostensibly do the same thing - have a PF and VF cooperate to change a
VF mac address. Rather than do this, if we are changing the mac of a VF
that has a link to the PF in the same VM then simply call
sriov_set_vf_mac instead, which is a proven working function that does
that.
If there is no PF available, or that fails non-fatally, then attempt to
change the VF's mac address as we would a PF, without updating the PF's
data.
Test case:
Create a VF:
echo 1 > /sys/class/net/<if>/device/sriov_numvfs
Set the mac address of the VF directly:
ip link set <vf> addr 00:11:22:33:44:55
Set the MAC address of the VF via the PF:
ip link set <pf> vf 0 mac 00:11:22:33:44:66
Without this patch the last command will fail with ENOENT.
Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Reported-by: Íñigo Huguet <ihuguet@redhat.com>
Fixes: 910c8789a777 ("set the MAC address using MC_CMD_VADAPTOR_SET_MAC")
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The LCDIF includes a color space converter that supports YUV input. Use
it to support YUV planes, either through the converter if the output
format is RGB, or in conversion bypass mode otherwise.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930083955.31580-5-laurent.pinchart@ideasonboard.com
|
|
Up to and including v1.3, HDMI supported limited quantization range only
for YCbCr. HDMI v1.4 introduced selectable quantization ranges, but this
feature isn't supported in the dw-hdmi driver that is used in
conjunction with the LCDIF in the i.MX8MP. The HDMI YCbCr output is thus
always advertised in the AVI infoframe as limited range.
The LCDIF driver, on the other hand, configures the CSC to produce full
range YCbCr. This mismatch results in loss of details and incorrect
colours. Fix it by switching to limited range YCbCr.
The coefficients are copied from drivers/media/platforms/nxp/imx-pxp.c
for coherency, as the hardware is most likely identical.
Fixes: 9db35bb349a0 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930083955.31580-4-laurent.pinchart@ideasonboard.com
|
|
The BIT() macro is meant to represent a single bit. Don't use it for
values of register fields that span multiple bits.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930083955.31580-3-laurent.pinchart@ideasonboard.com
|
|
A couple of the register macro values are incorrectly indented. Fix
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930083955.31580-2-laurent.pinchart@ideasonboard.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Dan Williams:
"Some small cleanups and fixes in and around the nvdimm subsystem. The
most significant change is a regression fix for nvdimm namespace
(volume) creation when the namespace size is smaller than 2MB/
Summary:
- Fix nvdimm namespace creation on platforms that do not publish
associated 'DIMM' metadata for a persistent memory region.
- Miscellaneous fixes and cleanups"
* tag 'libnvdimm-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
ACPI: HMAT: Release platform device in case of platform_device_add_data() fails
dax: Remove usage of the deprecated ida_simple_xxx API
libnvdimm/region: Allow setting align attribute on regions without mappings
nvdimm/namespace: Fix comment typo
nvdimm: make __nvdimm_security_overwrite_query static
nvdimm/region: Fix kernel-doc
nvdimm/namespace: drop unneeded temporary variable in size_store()
nvdimm/namespace: return uuid_null only once in nd_dev_to_uuid()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A great rework of the isl12022 driver makes up the bulk of the
changes. There is also an important fix for CMOS and then the usual
small fixes:
- switch to devm_clk_get_enabled() where relevant
- cmos: event handler registration fix
- isl12022: code improvements"
* tag 'rtc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rv3028: Fix codestyle errors
rtc: cmos: Fix event handler registration ordering issue
rtc: k3: Use devm_clk_get_enabled() helper
rtc: jz4740: Use devm_clk_get_enabled() helper
rtc: mpfs: Use devm_clk_get_enabled() helper
rtc: ds1685: Fix spelling of function name in comment block
rtc: isl12022: switch to using regmap API
rtc: isl12022: drop redundant write to HR register
rtc: isl12022: use dev_set_drvdata() instead of i2c_set_clientdata()
rtc: isl12022: use %ptR
rtc: isl12022: simplify some expressions
rtc: isl12022: drop a dev_info()
rtc: isl12022: specify range_min and range_max
rtc: isl12022: stop using deprecated devm_rtc_device_register()
rtc: stmp3xxx: Add failure handling for stmp3xxx_wdt_register()
rtc: mxc: Use devm_clk_get_enabled() helper
rtc: gamecube: Always reset HW_SRNPROT after read
rtc: k3: detect SoC to determine erratum fix
rtc: k3: wait until the unlock field is not zero
rtc: mpfs: Remove printing of stray CR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Not much this cycle, only two fixes for a rare event"
- fix device reattach issues"
* tag 'i3c/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Remove the wrong place of reattach.
i3c: master: Free the old_dyn_addr when reattach.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Use bitmap API to allocate bitmaps
- New attach mode, disable_fm, to attach without fastmap
- Fixes for various typos in comments
UBIFS:
- Fix for a deadlock when setting xattrs for encrypted file
- Fix for an assertion failures when truncating encrypted files
- Fixes for various typos in comments"
* tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: fastmap: Add fastmap control support for 'UBI_IOCATT' ioctl
ubi: fastmap: Use the bitmap API to allocate bitmaps
ubifs: Fix AA deadlock when setting xattr for encrypted file
ubifs: Fix UBIFS ro fail due to truncate in the encrypted directory
mtd: ubi: drop unexpected word 'a' in comments
ubi: block: Fix typos in comments
ubi: fastmap: Fix typo in comments
ubi: Fix repeated words in comments
ubi: ubi-media.h: Fix comment typo
ubi: block: Remove in vain semicolon
ubifs: Fix ubifs_check_dir_empty() kernel-doc comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are three fixes for build warnings that came in during the merge
window"
* tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: mmp: Make some symbols static
ARM: spear6xx: Staticize few definitions
clk: spear: Move prototype to accessible header
|
|
- Various clk rate range fixes
- Drop clk rate range constraints on clk_put() (redux)
* clk-rate-range: (28 commits)
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
clk: tests: Add some tests for orphan with multiple parents
clk: tests: Add tests for mux with multiple parents
clk: tests: Add tests for single parent mux
...
|
|
Commit 8c193f4714df ("pwm: tegra: Optimize period calculation") updated
the period calculation in the Tegra PWM driver and now returns an error
if the period requested is less than minimum period supported. This is
breaking PWM support on various Tegra platforms. For example, on the
Tegra210 Jetson Nano platform this is breaking the PWM fan support and
probing the PWM fan driver now fails ...
pwm-fan pwm-fan: Failed to configure PWM: -22
pwm-fan: probe of pwm-fan failed with error -22
The problem is that the default parent clock for the PWM on Tegra210 is
a 32kHz clock and is unable to support the requested PWM period.
Fix PWM support on Tegra20, Tegra30, Tegra114, Tegra124 and Tegra210 by
updating the parent clock for the PWM to be the PLL_P.
Fixes: 8c193f4714df ("pwm: tegra: Optimize period calculation")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # TF101 T20
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # TF201 T30
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # TF700T T3
Link: https://lore.kernel.org/r/20221010100046.6477-1-jonathanh@nvidia.com
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
These two clocks are now registered in the device tree as fixed clocks,
causing a regression in the driver as the clock already exists with
e.g. the name "pxo_board" as the MSM8660 GCC driver probes.
Fix this by just not hard-coding this anymore and everything works
like a charm.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: baecbda52933 ("ARM: dts: qcom: msm8660: fix node names for fixed clocks")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221013140745.7801-1-linus.walleij@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Since commit 262ca38f4b6e ("clk: Stop forwarding clk_rate_requests
to the parent"), the clk_rate_request is .. as the title says, not
forwarded anymore to the parent: this produces an issue with the
MediaTek clock MUX driver during GPU DVFS on MT8195, but not on
MT8192 or others.
This is because, differently from others, like MT8192 where all of
the clocks in the MFG parents tree are of mtk_mux type, but in the
parent tree of MT8195's MFG clock, we have one mtk_mux clock and
one (clk framework generic) mux clock, like so:
names: mfg_bg3d -> mfg_ck_fast_ref -> top_mfg_core_tmp (or) mfgpll
types: mtk_gate -> mux -> mtk_mux (or) mtk_pll
To solve this issue and also keep the GPU DVFS clocks code working
as expected, wire up a .determine_rate() callback for the mtk_mux
ops; for that, the standard clk_mux_determine_rate_flags() was used
as it was possible to.
This commit was successfully tested on MT6795 Xperia M5, MT8173 Elm,
MT8192 Spherion and MT8195 Tomato; no regressions were seen.
For the sake of some more documentation about this issue here's the
trace of it:
[ 12.211587] ------------[ cut here ]------------
[ 12.211589] WARNING: CPU: 6 PID: 78 at drivers/clk/clk.c:1462 clk_core_init_rate_req+0x84/0x90
[ 12.211593] Modules linked in: stp crct10dif_ce mtk_adsp_common llc rfkill snd_sof_xtensa_dsp
panfrost(+) sbs_battery cros_ec_lid_angle cros_ec_sensors snd_sof_of
cros_ec_sensors_core hid_multitouch cros_usbpd_logger snd_sof gpu_sched
snd_sof_utils fuse ipv6
[ 12.211614] CPU: 6 PID: 78 Comm: kworker/u16:2 Tainted: G W 6.0.0-next-20221011+ #58
[ 12.211616] Hardware name: Acer Tomato (rev2) board (DT)
[ 12.211617] Workqueue: devfreq_wq devfreq_monitor
[ 12.211620] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 12.211622] pc : clk_core_init_rate_req+0x84/0x90
[ 12.211625] lr : clk_core_forward_rate_req+0xa4/0xe4
[ 12.211627] sp : ffff80000893b8e0
[ 12.211628] x29: ffff80000893b8e0 x28: ffffdddf92f9b000 x27: ffff46a2c0e8bc05
[ 12.211632] x26: ffff46a2c1041200 x25: 0000000000000000 x24: 00000000173eed80
[ 12.211636] x23: ffff80000893b9c0 x22: ffff80000893b940 x21: 0000000000000000
[ 12.211641] x20: ffff46a2c1039f00 x19: ffff46a2c1039f00 x18: 0000000000000000
[ 12.211645] x17: 0000000000000038 x16: 000000000000d904 x15: 0000000000000003
[ 12.211649] x14: ffffdddf9357ce48 x13: ffffdddf935e71c8 x12: 000000000004803c
[ 12.211653] x11: 00000000a867d7ad x10: 00000000a867d7ad x9 : ffffdddf90c28df4
[ 12.211657] x8 : ffffdddf9357a980 x7 : 0000000000000000 x6 : 0000000000000004
[ 12.211661] x5 : ffffffffffffffc8 x4 : 00000000173eed80 x3 : ffff80000893b940
[ 12.211665] x2 : 00000000173eed80 x1 : ffff80000893b940 x0 : 0000000000000000
[ 12.211669] Call trace:
[ 12.211670] clk_core_init_rate_req+0x84/0x90
[ 12.211673] clk_core_round_rate_nolock+0xe8/0x10c
[ 12.211675] clk_mux_determine_rate_flags+0x174/0x1f0
[ 12.211677] clk_mux_determine_rate+0x1c/0x30
[ 12.211680] clk_core_determine_round_nolock+0x74/0x130
[ 12.211682] clk_core_round_rate_nolock+0x58/0x10c
[ 12.211684] clk_core_round_rate_nolock+0xf4/0x10c
[ 12.211686] clk_core_set_rate_nolock+0x194/0x2ac
[ 12.211688] clk_set_rate+0x40/0x94
[ 12.211691] _opp_config_clk_single+0x38/0xa0
[ 12.211693] _set_opp+0x1b0/0x500
[ 12.211695] dev_pm_opp_set_rate+0x120/0x290
[ 12.211697] panfrost_devfreq_target+0x3c/0x50 [panfrost]
[ 12.211705] devfreq_set_target+0x8c/0x2d0
[ 12.211707] devfreq_update_target+0xcc/0xf4
[ 12.211708] devfreq_monitor+0x40/0x1d0
[ 12.211710] process_one_work+0x294/0x664
[ 12.211712] worker_thread+0x7c/0x45c
[ 12.211713] kthread+0x104/0x110
[ 12.211716] ret_from_fork+0x10/0x20
[ 12.211718] irq event stamp: 7102
[ 12.211719] hardirqs last enabled at (7101): [<ffffdddf904ea5a0>] finish_task_switch.isra.0+0xec/0x2f0
[ 12.211723] hardirqs last disabled at (7102): [<ffffdddf91794b74>] el1_dbg+0x24/0x90
[ 12.211726] softirqs last enabled at (6716): [<ffffdddf90410be4>] __do_softirq+0x414/0x588
[ 12.211728] softirqs last disabled at (6507): [<ffffdddf904171d8>] ____do_softirq+0x18/0x24
[ 12.211730] ---[ end trace 0000000000000000 ]---
Fixes: 262ca38f4b6e ("clk: Stop forwarding clk_rate_requests to the parent")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221011135548.318323-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"This is very quiet release for LEDs, pca963 got blinking support and
that's pretty much it"
* tag 'leds-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: pca963: fix misleading indentation
dt-bindings: leds: Document mmc trigger
leds: pca963x: fix blink with hw acceleration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Cortex-A55 errata workaround (repeat TLBI)
- AMPERE1 added to the Spectre-BHB affected list
- MTE fix to avoid setting PG_mte_tagged if no tags have been touched
on a page
- Fixed typo in the SCTLR_EL1.SPINTMASK bit naming (the commit log has
other typos)
- perf: return value check in ali_drw_pmu_probe(),
ALIBABA_UNCORE_DRW_PMU dependency on ACPI
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add AMPERE1 to the Spectre-BHB affected list
arm64: mte: Avoid setting PG_mte_tagged if no tags cleared or restored
MAINTAINERS: rectify file entry in ALIBABA PMU DRIVER
drivers/perf: ALIBABA_UNCORE_DRW_PMU should depend on ACPI
drivers/perf: fix return value check in ali_drw_pmu_probe()
arm64: errata: Add Cortex-A55 to the repeat tlbi list
arm64/sysreg: Fix typo in SCTR_EL1.SPINTMASK
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- fix a race which causes page refcounting errors in ZONE_DEVICE pages
(Alistair Popple)
- fix userfaultfd test harness instability (Peter Xu)
- various other patches in MM, mainly fixes
* tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (29 commits)
highmem: fix kmap_to_page() for kmap_local_page() addresses
mm/page_alloc: fix incorrect PGFREE and PGALLOC for high-order page
mm/selftest: uffd: explain the write missing fault check
mm/hugetlb: use hugetlb_pte_stable in migration race check
mm/hugetlb: fix race condition of uffd missing/minor handling
zram: always expose rw_page
LoongArch: update local TLB if PTE entry exists
mm: use update_mmu_tlb() on the second thread
kasan: fix array-bounds warnings in tests
hmm-tests: add test for migrate_device_range()
nouveau/dmem: evict device private memory during release
nouveau/dmem: refactor nouveau_dmem_fault_copy_one()
mm/migrate_device.c: add migrate_device_range()
mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page()
mm/memremap.c: take a pgmap reference on page allocation
mm: free device private pages have zero refcount
mm/memory.c: fix race when faulting a device private page
mm/damon: use damon_sz_region() in appropriate place
mm/damon: move sz_damon_region to damon_sz_region
lib/test_meminit: add checks for the allocation functions
...
|
|
This reverts commit e96e27fc6f7971380283768e9a734af16b1716ee.
Jonathan reported that this commit broke this topology, where all the space
available on bus 02 was assigned to the 02:00.0 bridge window, leaving none
for the e1000 device at 02:00.1:
pci 0000:00:04.0: bridge window [mem 0x10200000-0x103fffff] to [bus 02-04]
pci 0000:02:00.0: bridge window [mem 0x10200000-0x103fffff] to [bus 03-04]
pci 0000:02:00.1: BAR 0: failed to assign [mem size 0x00020000]
e1000 0000:02:00.1: can't ioremap BAR 0: [??? 0x00000000 flags 0x0]
Link: https://lore.kernel.org/r/20221014124553.0000696f@huawei.com
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Fixes:
- When we added basic vDSO support in kernel 5.18 we introduced a bug
which prevented a mmap() of graphic card memory. This is because we
used the DMB (data memory break trap bit) page flag as special-bit,
but missed to clear that bit when loading the TLB.
- Graphics card memory size was not correctly aligned
- Spelling fixes (from Colin Ian King)
Enhancements:
- PDC console (which uses firmware calls) now rewritten as early
console
- Reduced size of alternative tables"
* tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix spelling mistake "mis-match" -> "mismatch" in eisa driver
parisc: Fix userspace graphics card breakage due to pgtable special bit
parisc: fbdev/stifb: Align graphics memory size to 4MB
parisc: Convert PDC console to an early console
parisc: Reduce kernel size by packing alternative tables
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Generate a change uevent on unsolicited device end I/O interrupt for
z/VM unit record devices supported by the vmur driver. This event can
be used to automatically trigger processing of files as they arrive
in the z/VM reader.
* tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vmur: generate uevent on unsolicited device end
s390/vmur: remove unnecessary BUG statement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- DT updates for the PolarFire SOC
- a fix to correct the handling of write-only mappings
- m{vetndor,arcd,imp}id is now in /proc/cpuinfo
- the SiFive L2 cache controller support has been refactored to also
support L3 caches
- misc fixes, cleanups and improvements throughout the tree
* tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
MAINTAINERS: add RISC-V's patchwork
RISC-V: Make port I/O string accessors actually work
riscv: enable software resend of irqs
RISC-V: Re-enable counter access from userspace
riscv: vdso: fix NULL deference in vdso_join_timens() when vfork
riscv: Add cache information in AUX vector
soc: sifive: ccache: define the macro for the register shifts
soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes
soc: sifive: ccache: reduce printing on init
soc: sifive: ccache: determine the cache level from dts
soc: sifive: ccache: Rename SiFive L2 cache to Composable cache.
dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache
riscv: check for kernel config option in t-head memory types errata
riscv: use BIT() marco for cpufeature probing
riscv: use BIT() macros in t-head errata init
riscv: drop some idefs from CMO initialization
riscv: cleanup svpbmt cpufeature probing
riscv: Pass -mno-relax only on lld < 15.0.0
RISC-V: Avoid dereferening NULL regs in die()
dt-bindings: riscv: add new riscv,isa strings for emulators
...
|
|
After commit 8799c0be89eb ("drm/amd/display: Fix vblank refcount in vrr
transition"), a build with CONFIG_DEBUG_FS=n is broken due to a
misplaced brace, along the lines of:
In file included from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_trace.h:39,
from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:41:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: At top level:
./include/drm/drm_atomic.h:864:9: error: expected identifier or ‘(’ before ‘for’
864 | for ((__i) = 0; \
| ^~~
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8317:9: note: in expansion of macro ‘for_each_new_crtc_in_state’
8317 | for_each_new_crtc_in_state(state, crtc, new_crtc_state, j)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Move the brace within the #ifdef so that the file can be built with or
without CONFIG_DEBUG_FS.
Fixes: 8799c0be89eb ("drm/amd/display: Fix vblank refcount in vrr transition")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are several spelling mistakes in kernel error messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Currently, a grant ref is always based on the Xen page granularity
(4KB), and guest commonly uses the same page granularity.
But the guest may use a different page granularity (i.e 64KB).
So adopt the code to be able to deal with it.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Link: https://lore.kernel.org/r/20221008151013.2537826-3-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Passed to xen_grant_dma_map_page() offset in the page
can be > PAGE_SIZE even if the guest uses the same page granularity
as Xen (4KB).
Before current patch, if such case happened we ended up providing
grants for the whole region in xen_grant_dma_map_page() which
was really unnecessary. The more, we ended up not releasing all
grants which represented that region in xen_grant_dma_unmap_page().
Current patch updates the code to be able to deal with such cases.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Link: https://lore.kernel.org/r/20221008151013.2537826-2-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Rather than busy looping, yield back to the scheduler and sleep for a
bit in the event that there's no data. This should hopefully prevent the
stalls that Mark reported:
<6>[ 3.362859] Freeing initrd memory: 16196K
<3>[ 23.160131] rcu: INFO: rcu_sched self-detected stall on CPU
<3>[ 23.166057] rcu: 0-....: (2099 ticks this GP) idle=03b4/1/0x40000002 softirq=28/28 fqs=1050
<4>[ 23.174895] (t=2101 jiffies g=-1147 q=2353 ncpus=4)
<4>[ 23.180203] CPU: 0 PID: 49 Comm: hwrng Not tainted 6.0.0 #1
<4>[ 23.186125] Hardware name: BCM2835
<4>[ 23.189837] PC is at bcm2835_rng_read+0x30/0x6c
<4>[ 23.194709] LR is at hwrng_fillfn+0x71/0xf4
<4>[ 23.199218] pc : [<c07ccdc8>] lr : [<c07cb841>] psr: 40000033
<4>[ 23.205840] sp : f093df70 ip : 00000000 fp : 00000000
<4>[ 23.211404] r10: c3c7e800 r9 : 00000000 r8 : c17e6b20
<4>[ 23.216968] r7 : c17e6b64 r6 : c18b0a74 r5 : c07ccd99 r4 : c3f171c0
<4>[ 23.223855] r3 : 000fffff r2 : 00000040 r1 : c3c7e800 r0 : c3f171c0
<4>[ 23.230743] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment none
<4>[ 23.238426] Control: 50c5387d Table: 0020406a DAC: 00000051
<4>[ 23.244519] CPU: 0 PID: 49 Comm: hwrng Not tainted 6.0.0 #1
Link: https://lore.kernel.org/all/Y0QJLauamRnCDUef@sirena.org.uk/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Newer DualSense firmware supports a revised classic rumble mode,
which feels more similar to rumble as supported on previous PlayStation
controllers. It has been made the default on PlayStation and non-PlayStation
devices now (e.g. iOS and Windows). Default to this new mode when
supported.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221010212313.78275-4-roderick.colenbrander@sony.com
|
|
Provide initial support for the DualSense Edge controller. The brings
support up to the level of the original DualSense, but won't yet provide
support for new features (e.g. reprogrammable buttons).
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
CC: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221010212313.78275-3-roderick.colenbrander@sony.com
|
|
Ensure we don't schedule any new output work on removal and wait
for any existing work to complete. If we don't do this e.g. rumble
work can get queued during deletion and we trigger a kernel crash.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
CC: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221010212313.78275-2-roderick.colenbrander@sony.com
|
|
Under certain conditions the Magic Trackpad can group 2 reports in a
single packet. The packet is split and the raw event function is
invoked recursively for each part.
However, after processing each part, the BTN_MOUSE status is updated,
sending multiple click events. [1]
Return after processing double reports to avoid this issue.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/811 # [1]
Fixes: a462230e16ac ("HID: magicmouse: enable Magic Trackpad support")
Reported-by: Nulo <git@nulo.in>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221009182747.90730-1-jose.exposito89@gmail.com
|
|
Independend of the current graphics resolution, adjust the reported
graphics card memory size to the next 4MB boundary.
This fixes the fbtest program which expects a naturally aligned size.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
|
|
All DRM formats assume little-endian byte order. On big-endian systems,
it is likely that the scanout buffer is in big endian as well. Update
the format accordingly and add endianness conversion to the format-helper
library. Also opt-in to allocated buffers in host format by default.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
|
|
Support the CRTC's color-management property and implement each model's
palette support.
The OF hardware has different methods of setting the palette. The
respective code has been taken from fbdev's offb and refactored into
per-model device functions. The device functions integrate this
functionality into the overall modesetting.
As palette handling is a CRTC property that depends on the primary
plane's color format, the plane's atomic_check helper now updates the
format field in ofdrm's custom CRTC state. The CRTC's atomic_flush
helper updates the palette for the format as needed.
v4:
* use cpu_to_be32() (Geert)
v3:
* lookup CRTC state with drm_atomic_get_new_crtc_state()
* access HW palette with writeb(), writel(), and readl() (Ben)
* declare register values as u32
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
|
|
Add a per-model device-function structure in preparation of adding
color-management support. Detection of the individual models has been
taken from fbdev's offb.
v3:
* define constants for PCI ids (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
|
|
Add a dedicated CRTC state to ofdrm to later store information for
palette updates.
v3:
* rework CRTC state helpers (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-3-tzimmermann@suse.de
|
|
Open Firmware provides basic display output via the 'display' node.
DT platform code already provides a device that represents the node's
framebuffer. Add a DRM driver for the device. The display mode and
color format is pre-initialized by the system's firmware. Runtime
modesetting via DRM is not possible. The display is useful during
early boot stages or as error fallback.
Similar functionality is already provided by fbdev's offb driver,
which is insufficient for modern userspace. The old driver includes
support for BootX device tree, which can be found on old 32-bit
PowerPC Macintosh systems. If these are still in use, the
functionality can be added to ofdrm or implemented in a new
driver. As with simpledrm, the fbdev driver cannot be selected if
ofdrm is already enabled.
Two notable points about the driver:
* Reading the framebuffer aperture from the device tree is not
reliable on all systems. Ofdrm takes the heuristics and a comment
from offb to pick the correct range.
* No resource management may be tied to the underlying PCI device.
Otherwise the handover to the native driver will fail with a resource
conflict. PCI management is therefore done as part of the platform
device's cleanup.
The driver has been tested on qemu's ppc64le emulation. The device
hand-over has been tested with bochs.
v5:
* use drm_atomic_helper_check_crtc_primary_plane()
v4:
* set preferred depth to the correct value
* set bpp value for console emulation
* output scanout-buffer parameters with drm_dbg()
v3:
* reintegrate FWFB helpers into ofdrm
* use damage iterator
* sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access()
* fix various atomic_check helpers
* remove CRTC atomic_{enable,disable} (Javier)
* compute stride with drm_format_info_min_pitch() (Daniel)
v2:
* removed simple-pipe helpers
* built driver on top of FWFB helpers
* merged all init code into single function
* make PCI support optional (Michal)
* support COMPILE_TEST (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
convert
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
|
|
For FT2000+/64 devices,
when four virtual machines share the same physical network interface,
DROP will occur due to the single core CPU performance problem.
ip_check_defrag and macvlan_process_broadcast is on the same CPU.
When the MACVLAN PORT increases, the CPU usage reaches more than 90%.
bc_queue > bc_queue_len_used (default 1000), causing DROP.
Signed-off-by: zhangxiangqian <zhangxiangqian@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During reallocation of RX buffers, new DMA mappings are created for
those buffers.
steps for reproduction:
while :
do
for ((i=0; i<=8160; i=i+32))
do
ethtool -G enp130s0f0 rx $i tx $i
sleep 0.5
ethtool -g enp130s0f0
done
done
This resulted in crash:
i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536
Driver BUG
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50
Call Trace:
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b
Missing register, driver bug
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140
Call Trace:
xdp_rxq_info_unreg+0x1e/0x50
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b
This was caused because of new buffers with different RX ring count should
substitute older ones, but those buffers were freed in
i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi,
thus kfree on rx_bi caused leak of already mapped DMA.
Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally
reallocate back to rx_bi when BPF program unloads.
If BPF program is loaded/unloaded and XSK pools are created, reallocate
RX queues accordingly in XSP_SETUP_XSK_POOL handler.
Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings")
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The switch sends autocast mib in little-endian. This is problematic for
big-endian system as the values needs to be converted.
Fix this by converting each mib value to cpu byte order.
Fixes: 5c957c7ca78c ("net: dsa: qca8k: add support for mib autocast in Ethernet packet")
Tested-by: Pawel Dembicki <paweldembicki@gmail.com>
Tested-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
