summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-09-18Merge tag 'pm-5.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new CPU ID to the RAPL power capping driver and prevent the ACPI processor idle driver from triggering RCU-lockdep complaints. Specifics: - Add support for the Lakefield chip to the RAPL power capping driver (Ricardo Neri). - Modify the ACPI processor idle driver to prevent it from triggering RCU-lockdep complaints which has started to happen after recent changes in that area (Peter Zijlstra)" * tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: processor: Take over RCU-idle for C3-BM idle cpuidle: Allow cpuidle drivers to take over RCU-idle ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP powercap: RAPL: Add support for Lakefield
2020-09-18Merge tag 'iommu-fixes-v5.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "Two fixes for the AMD IOMMU driver: - Fix a potential NULL-ptr dereference found by smatch - Fix interrupt remapping when a device is assigned to a guest and AVIC is enabled" * tag 'iommu-fixes-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Restore IRTE.RemapEn bit for amd_iommu_activate_guest_mode iommu/amd: Fix potential @entry null deref
2020-09-18Merge tag 'mtd/fixes-for-5.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD/SPI NOR fixes from Vignesh Raghavendra: "Revert patches that caused non volatile Quad Enable bit to be cleared for certain SPI NOR flashes during module remove or during shutdown, thus breaking backward compatibility" Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> * tag 'mtd/fixes-for-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: Revert "mtd: spi-nor: Add capability to disable flash quad mode" Revert "mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()"
2020-09-18Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: ACPI: processor: Take over RCU-idle for C3-BM idle cpuidle: Allow cpuidle drivers to take over RCU-idle ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
2020-09-18regmap: debugfs: Add back in erroneously removed initialisation of retCharles Keepax
Fixes: 94cc89eb8fa5 ("regmap: debugfs: Fix handling of name string for debugfs init delays") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200918112002.15216-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-18mac80211: swap NEED_TXPROCESSING and HW_80211_ENCAP tx flagsFelix Fietkau
In order to unify the tx status path, the hw 802.11 encapsulation flag needs to survive the trip to the tx status call. Since we don't have any free bits in info->flags, we need to move one. IEEE80211_TX_INTFL_NEED_TXPROCESSING is only used internally in mac80211, and only before the call into the driver. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-10-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: rework tx encapsulation offload APIFelix Fietkau
The current API (which lets the driver turn on/off per vif directly) has a number of limitations: - it does not deal with AP_VLAN - conditions for enabling (no tkip, no monitor) are only checked at add_interface time - no way to indicate 4-addr support In order to address this, store offload flags in struct ieee80211_vif (easy to extend for decap offload later). mac80211 initially sets the enable flag, but gives the driver a chance to modify it before its settings are applied. In addition to the .add_interface op, a .update_vif_offload op is introduced, which can be used for runtime changes. If a driver can't disable encap offload at runtime, or if it has some extra limitations, it can simply override the flags within those ops. Support for encap offload with 4-address mode interfaces can be enabled by setting a flag from .add_interface or .update_vif_offload. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-6-nbd@nbd.name [resolved conflict with commit aa2092a9bab3 ("ath11k: add raw mode and software crypto support")] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18iommu/amd: Restore IRTE.RemapEn bit for amd_iommu_activate_guest_modeSuravee Suthikulpanit
Commit e52d58d54a32 ("iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE") removed an assumption that modify_irte_ga always set the valid bit, which requires the callers to set the appropriate value for the struct irte_ga.valid bit before calling the function. Similar to the commit 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE"), which is for the function amd_iommu_deactivate_guest_mode(). The same change is also needed for the amd_iommu_activate_guest_mode(). Otherwise, this could trigger IO_PAGE_FAULT for the VFIO based VMs with AVIC enabled. Fixes: e52d58d54a321 ("iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE") Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Cc: Joao Martins <joao.m.martins@oracle.com> Link: https://lore.kernel.org/r/20200916111720.43913-1-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-18iommu/amd: Fix potential @entry null derefJoao Martins
After commit 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE"), smatch warns: drivers/iommu/amd/iommu.c:3870 amd_iommu_deactivate_guest_mode() warn: variable dereferenced before check 'entry' (see line 3867) Fix this by moving the @valid assignment to after @entry has been checked for NULL. Fixes: 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20200910171621.12879-1-joao.m.martins@oracle.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-17drm/amdgpu: remove experimental flag from navi12Alex Deucher
Navi12 has worked fine for a while now. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17drm/amdgpu: add device ID for sienna_cichlid (v2)Likun Gao
Add device ID for sienna_cichlid. v2: squash in additional device ids. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17drm/amdgpu: use the AV1 defines for VCN 3.0Alex Deucher
Switch from magic numbers to defines for AV1 clockgating. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17drm/amdgpu: add VCN 3.0 AV1 registersAlex Deucher
This adds the AV1 registers. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17drm/amdgpu: add the GC 10.3 VRS registersAlex Deucher
Add the VRS registers. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17drm/amdgpu: prevent double kfree ttm->sgPhilip Yang
Set ttm->sg to NULL after kfree, to avoid memory corruption backtrace: [ 420.932812] kernel BUG at /build/linux-do9eLF/linux-4.15.0/mm/slub.c:295! [ 420.934182] invalid opcode: 0000 [#1] SMP NOPTI [ 420.935445] Modules linked in: xt_conntrack ipt_MASQUERADE [ 420.951332] Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 1.5.4 07/09/2020 [ 420.952887] RIP: 0010:__slab_free+0x180/0x2d0 [ 420.954419] RSP: 0018:ffffbe426291fa60 EFLAGS: 00010246 [ 420.955963] RAX: ffff9e29263e9c30 RBX: ffff9e29263e9c30 RCX: 000000018100004b [ 420.957512] RDX: ffff9e29263e9c30 RSI: fffff3d33e98fa40 RDI: ffff9e297e407a80 [ 420.959055] RBP: ffffbe426291fb00 R08: 0000000000000001 R09: ffffffffc0d39ade [ 420.960587] R10: ffffbe426291fb20 R11: ffff9e49ffdd4000 R12: ffff9e297e407a80 [ 420.962105] R13: fffff3d33e98fa40 R14: ffff9e29263e9c30 R15: ffff9e2954464fd8 [ 420.963611] FS: 00007fa2ea097780(0000) GS:ffff9e297e840000(0000) knlGS:0000000000000000 [ 420.965144] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 420.966663] CR2: 00007f16bfffefb8 CR3: 0000001ff0c62000 CR4: 0000000000340ee0 [ 420.968193] Call Trace: [ 420.969703] ? __page_cache_release+0x3c/0x220 [ 420.971294] ? amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.972789] kfree+0x168/0x180 [ 420.974353] ? amdgpu_ttm_tt_set_user_pages+0x64/0xc0 [amdgpu] [ 420.975850] ? kfree+0x168/0x180 [ 420.977403] amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.978888] ttm_tt_unpopulate.part.10+0x53/0x60 [amdttm] [ 420.980357] ttm_tt_destroy.part.11+0x4f/0x60 [amdttm] [ 420.981814] ttm_tt_destroy+0x13/0x20 [amdttm] [ 420.983273] ttm_bo_cleanup_memtype_use+0x36/0x80 [amdttm] [ 420.984725] ttm_bo_release+0x1c9/0x360 [amdttm] [ 420.986167] amdttm_bo_put+0x24/0x30 [amdttm] [ 420.987663] amdgpu_bo_unref+0x1e/0x30 [amdgpu] [ 420.989165] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x9ca/0xb10 [amdgpu] [ 420.990666] kfd_ioctl_alloc_memory_of_gpu+0xef/0x2c0 [amdgpu] Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17ionic: add DIMLIB to KconfigShannon Nelson
>> ld.lld: error: undefined symbol: net_dim_get_rx_moderation >>> referenced by ionic_lif.c:52 (drivers/net/ethernet/pensando/ionic/ionic_lif.c:52) >>> net/ethernet/pensando/ionic/ionic_lif.o:(ionic_dim_work) in archive drivers/built-in.a >> ld.lld: error: undefined symbol: net_dim >>> referenced by ionic_txrx.c:456 (drivers/net/ethernet/pensando/ionic/ionic_txrx.c:456) >>> net/ethernet/pensando/ionic/ionic_txrx.o:(ionic_dim_update) in archive drivers/built-in.a v2: removed sketchy dashes in commit message Fixes: 04a834592bf5 ("ionic: dynamic interrupt moderation") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17nfp: use correct define to return NONE fecJakub Kicinski
struct ethtool_fecparam carries bitmasks not bit numbers. We want to return 1 (NONE), not 0. Fixes: 0d0870938337 ("nfp: implement ethtool FEC mode settings") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17Merge tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "A bunch of small fixes, some of the i915 ones have been out for a while and got better commit msg explaining some better reasoning behind them (hopefully this trend continues). Otherwise there a few AMD related ones mostly small, one radeon PLL regression fix and a bunch of small mediatek fixes. amdgpu: - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes amdkfd: - Fix a GPU reset crash - Fix a memory leak radeon: - Revert a PLL fix that broke other boards i915: - Avoid exposing a partially constructed context - Use RCU instead of mutex for context termination list iteration - Avoid data race reported by KCSAN - Filter wake_flags passed to default_wake_function mediatek: - Fix scrolling of panel - Remove duplicated include - Use CPU when fail to get cmdq event - Add missing put_device() call" * tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm: (21 commits) drm/amd/display: Don't log hdcp module warnings in dmesg drm/amdgpu: declare ta firmware for navy_flounder drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata() drm/mediatek: Add missing put_device() call in mtk_drm_kms_init() drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail drm/mediatek: Add missing put_device() call in mtk_ddp_comp_init() drm/mediatek: Use CPU when fail to get cmdq event drm/mediatek: Remove duplicated include drm/i915: Filter wake_flags passed to default_wake_function drm/i915: Be wary of data races when reading the active execlists drm/i915/gem: Reduce context termination list iteration guard to RCU drm/i915/gem: Delay tracking the GEM context until it is registered drm/amdgpu/dc: Require primary plane to be enabled whenever the CRTC is drm/radeon: revert "Prefer lower feedback dividers" drm/amdgpu: Include sienna_cichlid in USBC PD FW support. drm/amd/display: update nv1x stutter latencies drm/amd/display: Don't use DRM_ERROR() for DTM add topology drm/amd/pm: support runtime pptable update for sienna_cichlid etc. drm/amdkfd: fix a memory leak issue drm/kfd: fix a system crash issue during GPU recovery ...
2020-09-17net: mdio: octeon: Select MDIO_DEVRESAndrew Lunn
This driver makes use of devm_mdiobus_alloc_size. To ensure this is available select MDIO_DEVRES which provides it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17dpaa2-eth: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17hinic: fix potential resource leakWei Li
In rx_request_irq(), it will just return what irq_set_affinity_hint() returns. If it is failed, the napi and irq requested are not freed properly. So add exits for failures to handle these. Signed-off-by: Wei Li <liwei391@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17mlxsw: spectrum_qdisc: Disable port buffer autoresize with qdiscsPetr Machata
There are two interfaces to configure ETS: qdiscs and DCB. Historically, DCB ETS configuration was projected to ingress as well, and configured port buffers. Qdisc was not. Keep qdiscs behaving this way, and if an offloaded qdisc is configured on a port, move this port's headroom to a manual mode, thus allowing configuration of port buffers through dcbnl_setbuffer. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17mlxsw: spectrum_dcb: Implement dcbnl_setbuffer / getbufferPetr Machata
Add dcbnl_setbuffer, which bounces requests if a headroom is in DCB mode. Implement dcbnl_getbuffer such that it can always be used to determine port-buffer configuration, regardless of headroom mode. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17mlxsw: spectrum_buffers: Support two headroom modesPetr Machata
There are two interfaces to configure ETS: qdiscs and DCB. Historically, DCB ETS configuration was projected to ingress as well, and configured port buffers. Qdisc was not. So as not to break clients that today use DCB ETS and PFC and rely on getting a reasonable ingress buffer priomap, keep the ETS mirroring in effect. Since qdiscs have not done this mirroring historically, it is reasonable not to introduce it, but rather permit manual ingress configuration through dcbnl_setbuffer only in the qdisc mode. This will require a toggle to indicate whether buffer sizes should be autocomputed or taken from dcbnl_setbuffer, and likewise for priomaps. Introduce such and initialize it, and guard port buffer size configuration as appropriate. The toggle is currently left in the DCB position. In a following patch, qdisc code will switch it. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: phy: Do not warn in phy_stop() on PHY_DOWNFlorian Fainelli
When phy_is_started() was added to catch incorrect PHY states, phy_stop() would not be qualified against PHY_DOWN. It is possible to reach that state when the PHY driver has been unbound and the network device is then brought down. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: phy: Avoid NPD upon phy_detach() when driver is unboundFlorian Fainelli
If we have unbound the PHY driver prior to calling phy_detach() (often via phy_disconnect()) then we can cause a NULL pointer de-reference accessing the driver owner member. The steps to reproduce are: echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind ip link set eth0 down Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17drivers/net/wan/hdlc: Set skb->protocol before transmittingXie He
This patch sets skb->protocol before transmitting frames on the HDLC device, so that a user listening on the HDLC device with an AF_PACKET socket will see outgoing frames' sll_protocol field correctly set and consistent with that of incoming frames. 1. Control frames in hdlc_cisco and hdlc_ppp When these drivers send control frames, skb->protocol is not set. This value should be set to htons(ETH_P_HDLC), because when receiving control frames, their skb->protocol is set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, which then calls cisco_type_trans or ppp_type_trans. The skb->protocol of control frames is set to htons(ETH_P_HDLC) so that the control frames can be received by hdlc_rcv in hdlc.c, which calls cisco_rx or ppp_rx to process the control frames. 2. hdlc_fr When this driver sends control frames, skb->protocol is set to internal values used in this driver. When this driver sends data frames (from upper stacked PVC devices), skb->protocol is the same as that of the user data packet being sent on the upper PVC device (for normal PVC devices), or is htons(ETH_P_802_3) (for Ethernet-emulating PVC devices). However, skb->protocol for both control frames and data frames should be set to htons(ETH_P_HDLC), because when receiving, all frames received on the HDLC device will have their skb->protocol set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, and because this driver doesn't provide a type_trans function in struct hdlc_proto, all frames will have their skb->protocol set to htons(ETH_P_HDLC). The frames are then received by hdlc_rcv in hdlc.c, which calls fr_rx to process the frames (control frames are consumed and data frames are re-received on upper PVC devices). Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17drivers/net/wan/lapbether: Make skb->protocol consistent with the headerXie He
This driver is a virtual driver stacked on top of Ethernet interfaces. When this driver transmits data on the Ethernet device, the skb->protocol setting is inconsistent with the Ethernet header prepended to the skb. This causes a user listening on the Ethernet interface with an AF_PACKET socket, to see different sll_protocol values for incoming and outgoing frames, because incoming frames would have this value set by parsing the Ethernet header. This patch changes the skb->protocol value for outgoing Ethernet frames, making it consistent with the Ethernet header prepended. This makes a user listening on the Ethernet device with an AF_PACKET socket, to see the same sll_protocol value for incoming and outgoing frames. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add Switchdev driver implementationVadym Kochan
The following features are supported: - VLAN-aware bridge offloading - VLAN-unaware bridge offloading - FDB offloading (learning, ageing) - Switchport configuration Currently there are some limitations like: - Only 1 VLAN-aware bridge instance supported - FDB ageing timeout parameter is set globally per device Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add ethtool interface supportVadym Kochan
The ethtool API provides support for the configuration of the following features: speed and duplex, auto-negotiation, MDI-x, forward error correction, port media type. The API also provides information about the port status, hardware and software statistic. The following limitation exists: - port media type should be configured before speed setting - ethtool -m option is not supported - ethtool -p option is not supported - ethtool -r option is supported for RJ45 port only - the following combination of parameters is not supported: ethtool -s sw1pX port XX autoneg on - forward error correction feature is supported only on SFP ports, 10G speed - auto-negotiation and MDI-x features are not supported on Copper-to-Fiber SFP module Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add basic devlink supportVadym Kochan
Add very basic support for devlink interface: - driver name - fw version - devlink ports Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add PCI interface supportVadym Kochan
Add PCI interface driver for Prestera Switch ASICs family devices, which provides: - Firmware loading mechanism - Requests & events handling to/from the firmware - Access to the firmware on the bus level The firmware has to be loaded each time the device is reset. The driver is loading it from: /lib/firmware/mrvl/prestera/mvsw_prestera_fw-v{MAJOR}.{MINOR}.img The full firmware image version is located within the internal header and consists of 3 numbers - MAJOR.MINOR.PATCH. Additionally, driver has hard-coded minimum supported firmware version which it can work with: MAJOR - reflects the support on ABI level between driver and loaded firmware, this number should be the same for driver and loaded firmware. MINOR - this is the minimum supported version between driver and the firmware. PATCH - indicates only fixes, firmware ABI is not changed. Firmware image file name contains only MAJOR and MINOR numbers to make driver be compatible with any PATCH version. Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add driver for Prestera family ASIC devicesVadym Kochan
Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17cxgb4: fix memory leak during module unloadRaju Rangoju
Fix the memory leak in mps during module unload path by freeing mps reference entries if the list adpter->mps_ref is not already empty Fixes: 28b3870578ef ("cxgb4: Re-work the logic for mps refcounting") Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17hv_netvsc: Add validation for untrusted Hyper-V valuesAndres Beltran
For additional robustness in the face of Hyper-V errors or malicious behavior, validate all values that originate from packets that Hyper-V has sent to the guest in the host-to-guest ring buffer. Ensure that invalid values cannot cause indexing off the end of an array, or subvert an existing validation via integer overflow. Ensure that outgoing packets do not have any leftover guest memory that has not been zeroed out. Signed-off-by: Andres Beltran <lkmlabelt@gmail.com> Co-developed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hns3: use napi_consume_skb() when cleaning tx descYunsheng Lin
Use napi_consume_skb() to batch consuming skb when cleaning tx desc in NAPI polling. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hns3: use writel() to optimize the barrier operationYunsheng Lin
writel() can be used to order I/O vs memory by default when writing portable drivers. Use writel() to replace wmb() + writel_relaxed(), and writel() is dma_wmb() + writel_relaxed() for ARM64, so there is an optimization here because dma_wmb() is a lighter barrier than wmb(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hns3: optimize the rx clean processYunsheng Lin
Currently HNS3_RING_RX_RING_FBDNUM_REG register is read to determine how many rx desc can be cleaned. To avoid the register read operation in the critical data path, use the valid bit in the rx desc to determine if a specific rx desc can be cleaned. The hns3 driver clear valid bit in the rx desc before notifying the rx desc to the hw, and hw will only set the valid bit of the rx desc after corresponding buffer is filled with packet data and other field in the rx desc is set accordingly. Add hns3_rx_ring_move_fw() function to clear the valid bit in the rx desc before moving rx ring's next_to_clean forward to avoid double cleaning a rx desc, also add a dma_rmb() barrier in hns3_handle_rx_bd() to make sure valid bit is set before reading other field in the rx desc. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hns3: optimize the tx clean processYunsheng Lin
Currently HNS3_RING_TX_RING_HEAD_REG register is read to determine how many tx desc can be cleaned. To avoid the register read operation in the critical data path, use the valid bit in the tx desc to determine if a specific tx desc can be cleaned. The hns3 driver sets valid bit in the tx desc before ringing a doorbell to the hw, and hw will only clear the valid bit of the tx desc after corresponding packet is sent out to the wire. And because next_to_use for tx ring is a changing variable when the driver is filling the tx desc, so reuse the pull_len for rx ring to record the tx desc that has notified to the hw, so that hns3_nic_reclaim_desc() can decide how many tx desc's valid bit need checking when reclaiming tx desc. And io_err_cnt stat is also removed for it is not used anymore. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hns3: batch tx doorbell operationYunsheng Lin
Use netdev_xmit_more() to defer the tx doorbell operation when the skb is passed to the driver continuously. By doing this we can improve the overall xmit performance by avoid some doorbell operations. Also, the tx_err_cnt stat is not used, so rename it to tx_more stat. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hns3: batch the page reference count updatesYunsheng Lin
Batch the page reference count updates instead of doing them one at a time. By doing this we can improve the overall receive performance by avoid some atomic increment operations when the rx page is reused. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18Merge tag 'mediatek-drm-fixes-5.9' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.9 1. Fix scrolling of panel 2. Remove duplicated include 3. Use CPU when fail to get cmdq event 4. Add missing put_device() call Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200916231724.30571-1-chunkuang.hu@kernel.org
2020-09-18Merge tag 'drm-intel-fixes-2020-09-17' of ↵Dave Airlie
ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc6: - Avoid exposing a partially constructed context - Use RCU instead of mutex for context termination list iteration - Avoid data race reported by KCSAN - Filter wake_flags passed to default_wake_function Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y2l8vlj3.fsf@intel.com
2020-09-18Merge tag 'amd-drm-fixes-5.9-2020-09-17' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-09-17: amdgpu: - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes amdkfd: - Fix a GPU reset crash - Fix a memory leak radeon: - Revert a PLL fix that broke other boards Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917043818.3717-1-alexander.deucher@amd.com
2020-09-17i2c: core: Call i2c_acpi_install_space_handler() before ↵Hans de Goede
i2c_acpi_register_devices() Some ACPI i2c-devices _STA method (which is used to detect if the device is present) use autodetection code which probes which device is present over i2c. This requires the I2C ACPI OpRegion handler to be registered before we enumerate i2c-clients under the i2c-adapter. This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and ThinkBook 15 IIL not getting an i2c-client instantiated and thus not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-17regmap: debugfs: Fix handling of name string for debugfs init delaysCharles Keepax
In regmap_debugfs_init the initialisation of the debugfs is delayed if the root node isn't ready yet. Most callers of regmap_debugfs_init pass the name from the regmap_config, which is considered temporary ie. may be unallocated after the regmap_init call returns. This leads to a potential use after free, where config->name has been freed by the time it is used in regmap_debugfs_initcall. This situation can be seen on Zynq, where the architecture init_irq callback registers a syscon device, using a local variable for the regmap_config. As init_irq is very early in the platform bring up the regmap debugfs root isn't ready yet. Although this doesn't crash it does result in the debugfs entry not having the correct name. Regmap already sets map->name from config->name on the regmap_init path and the fact that a separate field is used to pass the name to regmap_debugfs_init appears to be an artifact of the debugfs name being added before the map name. As such this patch updates regmap_debugfs_init to use map->name, which is already duplicated from the config avoiding the issue. This does however leave two lose ends, both regmap_attach_dev and regmap_reinit_cache can be called after a regmap is registered and would have had the effect of applying a new name to the debugfs entries. In both of these cases it was chosen to update the map name. In the case of regmap_attach_dev there are 3 users that currently use this function to update the name, thus doing so avoids changes for those users and it seems reasonable that attaching a device would want to set the name of the map. In the case of regmap_reinit_cache the primary use-case appears to be devices that need some register access to identify the device (for example devices in the same family) and then update the cache to match the exact hardware. Whilst no users do currently update the name here, given the use-case it seemed reasonable the name might want to be updated once the device is better identified. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200917120828.12987-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17usblp: fix race between disconnect() and read()Oliver Neukum
read() needs to check whether the device has been disconnected before it tries to talk to the device. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200917103427.15740-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17gpiolib: Fix line event handling in syscall compatible modeAndy Shevchenko
The introduced line event handling ABI in the commit 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") missed the fact that 64-bit kernel may serve for 32-bit applications. In such case the very first check in the lineevent_read() will fail due to alignment differences. To workaround this introduce lineevent_get_size() helper which returns actual size of the structure in user space. Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-17nvmet: get transport reference for passthru ctrlChristoph Hellwig
Grab a reference to the transport driver to ensure it can't be unloaded while a passthrough controller is active. Fixes: c1fef73f793b ("nvmet: add passthru code to process commands") Reported-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2020-09-17nvme-core: get/put ctrl and transport module in nvme_dev_open/release()Chaitanya Kulkarni
Get and put the reference to the ctrl in the nvme_dev_open() and nvme_dev_release() before and after module get/put for ctrl in char device file operations. Introduce char_dev relase function, get/put the controller and module which allows us to fix the potential Oops which can be easily reproduced with a passthru ctrl (although the problem also exists with pure user access): Entering kdb (current=0xffff8887f8290000, pid 3128) on processor 30 Oops: (null) due to oops @ 0xffffffffa01019ad CPU: 30 PID: 3128 Comm: bash Tainted: G W OE 5.8.0-rc4nvme-5.9+ #35 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.4 RIP: 0010:nvme_free_ctrl+0x234/0x285 [nvme_core] Code: 57 10 a0 e8 73 bf 02 e1 ba 3d 11 00 00 48 c7 c6 98 33 10 a0 48 c7 c7 1d 57 10 a0 e8 5b bf 02 e1 8 RSP: 0018:ffffc90001d63de0 EFLAGS: 00010246 RAX: ffffffffa05c0440 RBX: ffff8888119e45a0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff8888177e9550 RDI: ffff8888119e43b0 RBP: ffff8887d4768000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: ffffc90001d63c90 R12: ffff8888119e43b0 R13: ffff8888119e5108 R14: dead000000000100 R15: ffff8888119e5108 FS: 00007f1ef27b0740(0000) GS:ffff888817600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa05c0470 CR3: 00000007f6bee000 CR4: 00000000003406e0 Call Trace: device_release+0x27/0x80 kobject_put+0x98/0x170 nvmet_passthru_ctrl_disable+0x4a/0x70 [nvmet] nvmet_passthru_enable_store+0x4c/0x90 [nvmet] configfs_write_file+0xe6/0x150 vfs_write+0xba/0x1e0 ksys_write+0x5f/0xe0 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f1ef1eb2840 Code: Bad RIP value. RSP: 002b:00007fffdbff0eb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1ef1eb2840 RDX: 0000000000000002 RSI: 00007f1ef27d2000 RDI: 0000000000000001 RBP: 00007f1ef27d2000 R08: 000000000000000a R09: 00007f1ef27b0740 R10: 0000000000000001 R11: 0000000000000246 R12: 00007f1ef2186400 R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000 With this patch fix we take the module ref count in nvme_dev_open() and release that ref count in newly introduced nvme_dev_release(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit (git 2.34.1) at 2025-09-19 00:39:13 +0000