summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-09-15s390/cio: Helper functions to read CSSID, IID, and CHIDAlexandra Winter
Add helper functions to expose Channel Subsystem ID (CSSID), MIF Image Id (IID), Channel ID (CHID) and Channel Path ID (CHPID). These values are required by the qeth driver's exploitation of network- address-change-notifications to determine which entries belong to this interface. Store the Partition identifier in System log, as this may be used to map a Linux view to a Hardware view for debugging purpose. Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15s390/cio: Add new Operation Code OC3 to PNSOAlexandra Winter
Add support for operation code 3 (OC3) of the Perform-Network-Subchannel-Operations (PNSO) function of the Channel-Subsystem-Call (CHSC) instruction. PNSO provides 2 operation codes: OC0 - BRIDGE_INFO OC3 - ADDR_INFO (new) Extend the function calls to *pnso* to pass the OC and add new response code 0108. Support for OC3 is indicated by a flag in the css_general_characteristics. Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15net/mlx5e: Add CQE compression support for multi-strides packetsOfer Levi
Add CQE compression support for completions of packets that span multiple strides in a Striding RQ, per the HW capability. In our memory model, we use small strides (256B as of today) for the non-linear SKB mode. This feature allows CQE compression to work also for multiple strides packets. In this case decompressing the mini CQE array will use stride index provided by HW as part of the mini CQE. Before this feature, compression was possible only for single-strided packets, i.e. for packets of size up to 256 bytes when in non-linear mode, and the index was maintained by SW. This feature is supported for ConnectX-5 and above. Feature performance test: This was whitebox-tested, we reduced the PCI speed from 125Gb/s to 62.5Gb/s to overload pci and manipulated mlx5 driver to drop incoming packets before building the SKB to achieve low cpu utilization. Outcome is low cpu utilization and bottleneck on pci only. Test setup: Server: Intel(R) Xeon(R) Silver 4108 CPU @ 1.80GHz server, 32 cores NIC: ConnectX-6 DX. Sender side generates 300 byte packets at full pci bandwidth. Receiver side configuration: Single channel, one cpu processing with one ring allocated. Cpu utilization is ~20% while pci bandwidth is fully utilized. For the generated traffic and interface MTU of 4500B (to activate the non-linear SKB mode), packet rate improvement is about 19% from ~17.6Mpps to ~21Mpps. Without this feature, counters show no CQE compression blocks for this setup, while with the feature, counters show ~20.7Mpps compressed CQEs in ~500K compression blocks. Signed-off-by: Ofer Levi <oferle@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-15net/mlx5e: Add IPv6 traffic class (DSCP) header rewrite supportMaor Dickman
Add support for rewriting of IPV6 DSCP part of traffic class field. Next commands, for example, can be used to offload rewrite action: OVS: $ ovs-ofctl add-flow ovs-sriov "tcpv6, in_port=REP, \ actions=mod_nw_tos:68, output:NIC" iproute2: $ tc filter add dev REP ingress protocol ipv6 prio 1 flower skip_sw \ ip_proto tcp \ action pedit ex munge ip6 traffic_class set 68 retain 0xfc pipe \ action mirred egress redirect dev NIC Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-15net/mlx5e: Add support for tc trapEli Cohen
Support tc trap such that packets can explicitly be forwarded to slow path if they match a specific rule. In the example below, we want packets with src IP equals 7.7.7.8 to be forwarded to software, in which case it will get to the appropriate representor net device. $ tc filter add dev eth1 protocol ip prio 1 root flower skip_sw \ src_ip 7.7.7.8 action trap Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-15net/mlx5: E-Switch, Use vport metadata matching by defaultVu Pham
Multiple features use metadata matching such as bond vport in live migration, multi-port RoCE mode, stacked devices; hence, enable vport metadata matching by default. Fixes: 1e62e222db2e ("net/mlx5: E-Switch, Use vport metadata matching only when mandatory") Signed-off-by: Vu Pham <vuhuong@mellanox.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-15net/mlx5: E-Switch, Setup all vports' metadata to support peer miss ruleVu Pham
In merged eswitch configuration, peer miss rule is setup for all vports. If metadata is enabled, peer miss rule with metadata matching will be configured instead of source port matching; however, some vports that have not yet been enabled don't have default_metadata setup and their default_metadata will be zero. Hence, setup/cleanup default metadata for all vports when eswitch moves in/out of offloads mode. Fixes: 133dcfc577ea ("net/mlx5: E-Switch, Alloc and free unique metadata for match") Signed-off-by: Vu Pham <vuhuong@mellanox.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-15net/mlx5: E-Switch, Dedicated metadata for uplink vportVu Pham
Uplink vport must have a dedicated metadata with vhca_id being part of the metadata. Fixes: 133dcfc577ea ("net/mlx5: E-Switch, Alloc and free unique metadata for match") Signed-off-by: Vu Pham <vuhuong@mellanox.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-15net/mlx5: E-Switch, Check and enable metadata support flag before usingVu Pham
Check E-Switch capabilities and enable metadata support flag before using it to setup other features that need metadata. Signed-off-by: Vu Pham <vuhuong@mellanox.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-15net/mlx5e: Add LAG warning if bond slave is not lag masterJianbo Liu
LAG offload can't be enabled if the enslaved PF is not lag master, which is indicated by HCA capabilities bit. It is cleared if more than 64 VFs are configured for this PF. Previously, a data structure is created to store lag info, including PFs to be enslaved, then a handler is registered for netdev notifier. However, this initialization is skipped if PF is not lag master. So PF can't handle CHANGEUPPER event from upper bond device. Even worse, PF is enslaved silently, and LAG offload is not activated. Fix this by registering netdev notifier for PFs which are not lag masters. When CHANGEUPPER event is received, and both physical ports (and only them) on the same NIC are about to be enslaved, a warning is returned for user to know it. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-15net/mlx5e: Add LAG warning for unsupported tx typeJianbo Liu
If bond tx type is not active-backup or hash, LAG offload can't be enabled. When CHANGEUPPER event is received, and both PFs (and only them) under the same lag master are about to be enslaved, a warning is returned for user to know the offload failure, otherwise PFs are enslaved silently without LAG offload activated. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-15net/mlx5e: Return a valid errno if can't get lag device indexJianbo Liu
Change the return value to -ENOENT, to make it more meaningful. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-15net/mlx5: Don't call timecounter cyc2time directly from 1PPS flowEran Ben Elisha
Before calling timecounter_cyc2time(), clock->lock must be taken. Use mlx5_timecounter_cyc2time instead which guarantees a safe access. Fixes: afc98a0b46d8 ("net/mlx5: Update ptp_clock_event foreach PPS event") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
2020-09-15net/mlx5: Release clock lock before scheduling a PPS workEran Ben Elisha
Holding the clock lock is not required when scheduling a PPS work. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
2020-09-15net/mlx5: Rename ptp clock infoEran Ben Elisha
Fix a typo in ptp_clock_info naming: mlx5_p2p -> mlx5_ptp. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
2020-09-15net/mlx5: Always use container_of to find mdev pointer from clock structEran Ben Elisha
Clock struct is part of struct mlx5_core_dev. Code was inconsistent, on some cases used container_of and on another used clock->mdev. Align code to use container_of amd remove clock->mdev pointer. While here, fix reverse xmas tree coding style. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
2020-09-15net/mlx5: remove erroneous fallthroughDan Carpenter
This isn't a fall through because it was after a return statement. The fall through annotation leads to a Smatch warning: drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:246 mlx5e_ethtool_get_sset_count() warn: ignoring unreachable code. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-09-15net/mlx5: Fix uninitialized variable warningMoshe Tal
Add variable initialization to eliminate the warning "variable may be used uninitialized". Fixes: 5f29458b77d5 ("net/mlx5e: Support dump callback in TX reporter") Signed-off-by: Moshe Tal <moshet@mellanox.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-15Merge tag 'v5.9-clk-samsung-fixes' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-fixes Pull a Samsung clk driver fix from Sylwester Nawrocki: - fix for a regression in v5.9-rc1 on Odroid XU3/XU4, i.e. booting failure due to the DRAM controller root clock being disabled * tag 'v5.9-clk-samsung-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk: clk: samsung: Keep top BPLL mux on Exynos542x enabled
2020-09-15spi: bcm2835: Make polling_limit_us staticJason Yan
This eliminates the following sparse warning: drivers/spi/spi-bcm2835.c:78:14: warning: symbol 'polling_limit_us' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200912072211.602735-1-yanaijie@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-15efi: efibc: check for efivars write capabilityArd Biesheuvel
Branden reports that commit f88814cc2578c1 ("efi/efivars: Expose RT service availability via efivars abstraction") regresses UEFI platforms that implement GetVariable but not SetVariable when booting kernels that have EFIBC (bootloader control) enabled. The reason is that EFIBC is a user of the efivars abstraction, which was updated to permit users that rely only on the read capability, but not on the write capability. EFIBC is in the latter category, so it has to check explicitly whether efivars supports writes. Fixes: f88814cc2578c1 ("efi/efivars: Expose RT service availability via efivars abstraction") Tested-by: Branden Sherrell <sherrellbc@gmail.com> Link: https://lore.kernel.org/linux-efi/AE217103-C96F-4AFC-8417-83EC11962004@gmail.com/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-09-15clk: samsung: Keep top BPLL mux on Exynos542x enabledMarek Szyprowski
BPLL clock must not be disabled because it is needed for proper DRAM operation. This is normally handled by respective memory devfreq driver, but when that driver is not yet probed or its probe has been deferred the clock might get disabled what causes board hang. Fix this by calling clk_prepare_enable() directly from the clock provider driver. Cc: stable@vger.kernel.org Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200807133143.22748-1-m.szyprowski@samsung.com Fixes: 6e7674c3c6df ("memory: Add DMC driver for Exynos5422") Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-09-15Merge tag 'thunderbolt-for-v5.9-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: thunderbolt: Fix for v5.9-rc6 One more fix that makes ASUS PA27AC Thunderbolt 3 monitor work more reliably. This has been in linux-next with no reported issues. * tag 'thunderbolt-for-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Retry DROM read once if parsing fails
2020-09-15EDAC/ghes: Check whether the driver is on the safe list correctlyBorislav Petkov
With CONFIG_DEBUG_TEST_DRIVER_REMOVE=y, a system would try to probe, unregister and probe again a driver. When ghes_edac is attempted to be loaded on a system which is not on the safe platforms list, ghes_edac_register() would return early. The unregister counterpart ghes_edac_unregister() would still attempt to unregister and exit early at the refcount test, leading to the refcount underflow below. In order to not do *anything* on the unregister path too, reuse the force_load parameter and check it on that path too, before fumbling with the refcount. ghes_edac: ghes_edac_register: entry ghes_edac: ghes_edac_register: return -ENODEV ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 10 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xb9/0x100 Modules linked in: CPU: 10 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #12 Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018 RIP: 0010:refcount_warn_saturate+0xb9/0x100 Code: 82 e8 fb 8f 4d 00 90 0f 0b 90 90 c3 80 3d 55 4c f5 00 00 75 88 c6 05 4c 4c f5 00 01 90 48 c7 c7 d0 8a 10 82 e8 d8 8f 4d 00 90 <0f> 0b 90 90 c3 80 3d 30 4c f5 00 00 0f 85 61 ff ff ff c6 05 23 4c RSP: 0018:ffffc90000037d58 EFLAGS: 00010292 RAX: 0000000000000026 RBX: ffff88840b8da000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff8216b24f RDI: 00000000ffffffff RBP: ffff88840c662e00 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000046 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88840ee80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000800002211000 CR4: 00000000003506e0 Call Trace: ghes_edac_unregister ghes_remove platform_drv_remove really_probe driver_probe_device device_driver_attach __driver_attach ? device_driver_attach ? device_driver_attach bus_for_each_dev bus_add_driver driver_register ? bert_init ghes_init do_one_initcall ? rcu_read_lock_sched_held kernel_init_freeable ? rest_init kernel_init ret_from_fork ... ghes_edac: ghes_edac_unregister: FALSE, refcount: -1073741824 Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200911164950.GB19320@zn.tnic
2020-09-15EDAC/ghes: Clear scanned data on unloadBorislav Petkov
Commit b972fdba8665 ("EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()") didn't clear all the information from the scanned system and, more specifically, left ghes_hw.num_dimms to its previous value. On a second load (CONFIG_DEBUG_TEST_DRIVER_REMOVE=y), the driver would use the leftover num_dimms value which is not 0 and thus the 0 check in enumerate_dimms() will get bypassed and it would go directly to the pointer deref: d = &hw->dimms[hw->num_dimms]; which is, of course, NULL: #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #7 Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018 RIP: 0010:enumerate_dimms.cold+0x7b/0x375 Reset the whole ghes_hw on driver unregister so that no stale values are used on a second system scan. Fixes: b972fdba8665 ("EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()") Cc: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200911164817.GA19320@zn.tnic
2020-09-15nvme-tcp: fix kconfig dependency warning when !CRYPTONecip Fazil Yildiran
When NVME_TCP is enabled and CRYPTO is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for CRYPTO_CRC32C Depends on [n]: CRYPTO [=n] Selected by [y]: - NVME_TCP [=y] && INET [=y] && BLK_DEV_NVME [=y] The reason is that NVME_TCP selects CRYPTO_CRC32C without depending on or selecting CRYPTO while CRYPTO_CRC32C is subordinate to CRYPTO. Honor the kconfig menu hierarchy to remove kconfig dependency warnings. Fixes: 79fd751d61aa ("nvme: tcp: selects CRYPTO_CRC32C for nvme-tcp") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-15nvme-pci: disable the write zeros command for Intel 600P/P3100David Milburn
The write zeros command does not work with 4k range. bash-4.4# ./blkdiscard /dev/nvme0n1p2 bash-4.4# strace -efallocate xfs_io -c "fzero 536895488 2048" /dev/nvme0n1p2 fallocate(3, FALLOC_FL_ZERO_RANGE, 536895488, 2048) = 0 +++ exited with 0 +++ bash-4.4# dd bs=1 if=/dev/nvme0n1p2 skip=536895488 count=512 | hexdump -C 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00000200 bash-4.4# ./blkdiscard /dev/nvme0n1p2 bash-4.4# strace -efallocate xfs_io -c "fzero 536895488 4096" /dev/nvme0n1p2 fallocate(3, FALLOC_FL_ZERO_RANGE, 536895488, 4096) = 0 +++ exited with 0 +++ bash-4.4# dd bs=1 if=/dev/nvme0n1p2 skip=536895488 count=512 | hexdump -C 00000000 5c 61 5c b0 96 21 1b 5e 85 0c 07 32 9c 8c eb 3c |\a\..!.^...2...<| 00000010 4a a2 06 ca 67 15 2d 8e 29 8d a8 a0 7e 46 8c 62 |J...g.-.)...~F.b| 00000020 bb 4c 6c c1 6b f5 ae a5 e4 a9 bc 93 4f 60 ff 7a |.Ll.k.......O`.z| Reported-by: Eric Sandeen <esandeen@redhat.com> Signed-off-by: David Milburn <dmilburn@redhat.com> Tested-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-14s390/dasd: Fix zero write for FBA devicesJan Höppner
A discard request that writes zeros using the global kernel internal ZERO_PAGE will fail for machines with more than 2GB of memory due to the location of the ZERO_PAGE. Fix this by using a driver owned global zero page allocated with GFP_DMA flag set. Fixes: 28b841b3a7cb ("s390/dasd: Add discard support for FBA devices") Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Cc: <stable@vger.kernel.org> # 4.14+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-14ionic: fix up debugfs after queue swapShannon Nelson
Clean and rebuild the debugfs info for the queues being swapped. Fixes: a34e25ab977c ("ionic: change the descriptor ring length without full reset") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: dsa: mt7530: Add the support of MT7531 switchLanden Chao
Add new support for MT7531: MT7531 is the next generation of MT7530. It is also a 7-ports switch with 5 giga embedded phys, 2 cpu ports, and the same MAC logic of MT7530. Cpu port 6 only supports SGMII interface. Cpu port 5 supports either RGMII or SGMII in different HW sku, but cannot be muxed to PHY of port 0/4 like mt7530. Due to SGMII interface support, pll, and pad setting are different from MT7530. This patch adds different initial setting, and SGMII phylink handlers of MT7531. MT7531 SGMII interface can be configured in following mode: - 'SGMII AN mode' with in-band negotiation capability which is compatible with PHY_INTERFACE_MODE_SGMII. - 'SGMII force mode' without in-band negotiation which is compatible with 10B/8B encoding of PHY_INTERFACE_MODE_1000BASEX with fixed full-duplex and fixed pause. - 2.5 times faster clocked 'SGMII force mode' without in-band negotiation which is compatible with 10B/8B encoding of PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause. Signed-off-by: Landen Chao <landen.chao@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: dsa: mt7530: Extend device data ready for adding a new hardwareLanden Chao
Add a structure holding required operations for each device such as device initialization, PHY port read or write, a checker whether PHY interface is supported on a certain port, MAC port setup for either bus pad or a specific PHY interface. The patch is done for ready adding a new hardware MT7531, and keep the same setup logic of existing hardware. Signed-off-by: Landen Chao <landen.chao@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: dsa: mt7530: Refine message in KconfigLanden Chao
Refine message in Kconfig with fixing typo and an explicit MT7621 support. Signed-off-by: Landen Chao <landen.chao@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: lantiq: Disable IRQs only if NAPI gets scheduledHauke Mehrtens
The napi_schedule() call will only schedule the NAPI if it is not already running. To make sure that we do not deactivate interrupts without scheduling NAPI only deactivate the interrupts in case NAPI also gets scheduled. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: lantiq: Use napi_complete_done()Hauke Mehrtens
Use napi_complete_done() and activate the interrupts when this function returns true. This way the generic NAPI code can take care of activating the interrupts. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: lantiq: use netif_tx_napi_add() for TX NAPIHauke Mehrtens
netif_tx_napi_add() should be used for NAPI in the TX direction instead of the netif_napi_add() function. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: lantiq: Wake TX queue againHauke Mehrtens
The call to netif_wake_queue() when the TX descriptors were freed was missing. When there are no TX buffers available the TX queue will be stopped, but it was not started again when they are available again, this is fixed in this patch. Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14drivers/net/wan/x25_asy: Remove an unnecessary x25_type_trans callXie He
x25_type_trans only needs to be called before we call netif_rx to pass the skb to upper layers. It does not need to be called before lapb_data_received. The LAPB module does not need the fields that are set by calling it. In the other two X.25 drivers - lapbether and hdlc_x25. x25_type_trans is only called before netif_rx and not before lapb_data_received. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14rndis_host: increase sleep time in the query-response loopOlympia Giannou
Some WinCE devices face connectivity issues via the NDIS interface. They fail to register, resulting in -110 timeout errors and failures during the probe procedure. In this kind of WinCE devices, the Windows-side ndis driver needs quite more time to be loaded and configured, so that the linux rndis host queries to them fail to be responded correctly on time. More specifically, when INIT is called on the WinCE side - no other requests can be served by the Client and this results in a failed QUERY afterwards. The increase of the waiting time on the side of the linux rndis host in the command-response loop leaves the INIT process to complete and respond to a QUERY, which comes afterwards. The WinCE devices with this special "feature" in their ndis driver are satisfied by this fix. Signed-off-by: Olympia Giannou <olympia.giannou@leica-geosystems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14mlxsw: spectrum_span: Derive SBIB from maximum port speed & MTUPetr Machata
The SBIB register configures the size of an internal buffer that the Spectrum ASICs use when mirroring traffic on egress. This size should be taken into account when validating that the port headroom buffers are not larger than the chip can handle. Up until now this was not done, which is incidentally not a problem, because the priority group buffers that mlxsw auto-configures are small enough that the boundary condition could not be violated. However when dcbnl_setbuffer is implemented, the user has control over sizes of PG buffers, and they might overshoot the headroom capacity. However the size of the SBIB buffer depends on port speed, and that cannot be vetoed. Therefore SBIB size should be deduced from maximum port speed. Additionally, once the buffers are configured by hand, the user could get into an uncomfortable situation where their MTU change requests get vetoed, because the SBIB does not fit anymore. Therefore derive SBIB size from maximum permissible MTU as well. Remove all the code that adjusted the SBIB size whenever speed or MTU changed. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14mlxsw: spectrum: Keep maximum speed aroundPetr Machata
The maximum port speed depends on link modes supported by the port, and for Ethernet ports is constant. The maximum speed will be handy when setting SBIB, the internal buffer used for traffic mirroring. Therefore, keep it in struct mlxsw_sp_port for easy access. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14mlxsw: spectrum: Keep maximum MTU aroundPetr Machata
The maximum port MTU depends on port type. On Spectrum, mlxsw configures all ports as Ethernet ports, and the maximum MTU therefore never changes. Besides checking MTU configuration, maximum MTU will also be handy when setting SBIB, the internal buffer used for traffic mirroring. Therefore, keep it in struct mlxsw_sp_port for easy access. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14mlxsw: spectrum_ethtool: Introduce ptys_max_speed callbackPetr Machata
The SBIB register configures the size of an internal buffer that the Spectrum ASICs use when mirroring traffic on egress. This size should be taken into account when validating that the port headroom buffers are not larger than the chip can handle. Up until now this was not done, which is incidentally not a problem, because the priority group buffers that mlxsw auto-configures are small enough that the boundary condition could not be violated. When dcbnl_setbuffer is implemented, the user gets control over sizes of PG buffers, and they might overshoot the headroom capacity. However the size of the SBIB buffer depends on port speed, which cannot be vetoed. There is obviously no way to retroactively push back on requests for overlarge PG buffers, or reject an overlarge MTU, or cancel losslessness of a certain PG. Therefore, instead of taking into account the current speed when calculating SBIB buffer size, take into account the maximum speed that a port with given Ethernet protocol capabilities can have. To that end, add a new ethtool callback, ptys_max_speed, which determines this maximum speed. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14mlxsw: spectrum_ethtool: Extract a helper to get Ethernet attributesPetr Machata
In order to allow reusing the logic, extract from mlxsw_sp_port_get_link_ksettings() the code to obtain Ethernet protocol attributes, mlxsw_sp_port_ptys_query(). Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2020-09-14 This series contains updates to i40e driver only. Li RongQing removes binding affinity mask to a fixed CPU and sets prefetch of Rx buffer page to occur conditionally. Björn provides AF_XDP performance improvements by not prefetching HW descriptors, using 16 byte descriptors, and moving buffer allocation out of Rx processing loop. v2: Define prefetch_page_address in a common header for patch 2. Dropped, previous, patch 5 as it is being reworked to be more generalized. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14hinic: add vxlan segmentation and cs offload supportLuo bin
Add NETIF_F_GSO_UDP_TUNNEL and NETIF_F_GSO_UDP_TUNNEL_CSUM features to support vxlan segmentation and checksum offload. Ipip and ipv6 tunnel packets are regarded as non-tunnel pkt for hw and as for other type of tunnel pkts, checksum offload is disabled. Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: qlcnic: remove unused variable 'val' in qlcnic_83xx_cam_unlock()Zhang Changzhong
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:661:6: warning: variable 'val' set but not used [-Wunused-but-set-variable] 661 | u32 val; | ^~~ After commit 7f9664525f9c ("qlcnic: 83xx memory map and HW access routines"), variable 'val' is never used in qlcnic_83xx_cam_unlock(), so removing it to avoid build warning. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: pxa168_eth: remove unused variable 'retval' int pxa168_eth_change_mtu()Zhang Changzhong
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/marvell/pxa168_eth.c:1190:6: warning: variable 'retval' set but not used [-Wunused-but-set-variable] 1190 | int retval; | ^~~~~~ Function pxa168_eth_change_mtu() always return zero, so variable 'retval' is redundant, just remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: fec: ptp: remove unused variable 'ns' in fec_time_keep()Zhang Changzhong
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/freescale/fec_ptp.c:523:6: warning: variable 'ns' set but not used [-Wunused-but-set-variable] 523 | u64 ns; | ^~ After commit 6605b730c061 ("FEC: Add time stamping code and a PTP hardware clock"), variable 'ns' is never used in fec_time_keep(), so removing it to avoid build warning. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: dnet: remove unused variable 'tx_status 'in dnet_start_xmit()Zhang Changzhong
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/dnet.c:510:6: warning: variable 'tx_status' set but not used [-Wunused-but-set-variable] u32 tx_status, irq_enable; ^~~~~~~~~ After commit 4796417417a6 ("dnet: Dave DNET ethernet controller driver (updated)"), variable 'tx_status' is never used in dnet_start_xmit(), so removing it to avoid build warning. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: smc91x: convert tasklets to use new tasklet_setup() APIAllen Pais
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-20 23:20:48 +0000