summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-09-21wcn36xx: Move wcn36xx_smd_set_sta_params() inside wcn36xx_smd_config_bss()Bryan O'Donoghue
In order to facilitate functional decomposition of wcn36xx_smd_config_bss() we need to move wcn36xx_smd_set_sta_params() later in function. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-3-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Functionally decompose wcn36xx_smd_config_sta()Bryan O'Donoghue
This commit functionally decomposes wcn36xx_smd_config_sta into a clearly defined wcn36xx_smd_config_sta_v0 and wcn36xx_smd_config_sta_v1 path. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150631.2178970-2-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wrapper function wcn36xx_smd_set_sta_params_v1()Bryan O'Donoghue
This commit adds a wrapper function wcn36xx_smd_set_sta_params_v1() which calls into wcn36xx_smd_set_sta_params() and then subsequently sets version-1 specific parameters. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-8-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_bss_vht_params()Bryan O'Donoghue
This commit adds wcn36xx_smd_set_bss_vht_params(). The job of this function is to decide if the BSS is VHT capable and if so set the appropriate bit in the BSS parameter structure for passing to the firmware. VHT Channel width set is not set since we don't support 160MHz. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-7-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_ht_ldpc_params()Bryan O'Donoghue
Adds a routine to allow setting the LDPC bit for HT parameter passing inside the version 1 STA parameters data structure. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-6-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_vht_params()Bryan O'Donoghue
This commit adds support for setting VHT parameters based on the declared VHT capability bits in the VHT capability structure. We cannot do 160MHz so VHT Channel width set should be zero. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-5-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_default_ht_ldpc_params()Bryan O'Donoghue
Toggling the LDPC enabled bit is possible only via the extended V1 data-structure. This function provides a means of setting the default depending on chip-type. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-4-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_default_vht_params()Bryan O'Donoghue
This commit adds support for setting default VHT parameters, which are exposed by the extended version 1 STA parameter type. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-3-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_set_default_rates_v1Bryan O'Donoghue
Add a routine to set some additional default parameters associated with the V1 data structure. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-2-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Use V1 data structure to store supported ratesBryan O'Donoghue
This patch converts the internal data structure used to store data-rates from version 0 to version 1. This allows us to extend out the internal storage to represent VHT parameters. Using the extended version 1 data-structure allows us to avoid a whole raft of version 1 specific fixup functions. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150450.2178784-3-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add VHT fields to parameter data structuresBryan O'Donoghue
In order to pass VHT parameters to wcn3680 we need to use a super-set of the V1 data-structures with additional VHT parameters tacked on. This patch adds the additional fields to the STA and BSS parameter structures. Since neither wcn3620 nor wcn3660 support VHT the size of the passed message is fixed to the previous message length. Subsequent changes will differentiate between wcn3620/wcn3660 and wcn3680 which does use the larger message size. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150450.2178784-2-bryan.odonoghue@linaro.org
2020-09-21ath11k: Remove rproc references from common core layerGovind Singh
IPQ8074 HW uses rproc with AHB as underlying hif layer. Move rproc references from common core layer to target hif layer. Remove IS_ENABLED check for CONFIG_REMOTEPROC as it's not required anymore. No functional changes. Compile tested only. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1600090615-18904-1-git-send-email-govinds@codeaurora.org
2020-09-21ath9k: hif_usb: fix race condition between usb_get_urb() and ↵Brooke Basile
usb_kill_anchored_urbs() Calls to usb_kill_anchored_urbs() after usb_kill_urb() on multiprocessor systems create a race condition in which usb_kill_anchored_urbs() deallocates the URB before the completer callback is called in usb_kill_urb(), resulting in a use-after-free. To fix this, add proper lock protection to usb_kill_urb() calls that can possibly run concurrently with usb_kill_anchored_urbs(). Reported-by: syzbot+89bd486af9427a9fc605@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=cabffad18eb74197f84871802fd2c5117b61febf Signed-off-by: Brooke Basile <brookebasile@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200911071427.32354-1-brookebasile@gmail.com
2020-09-21rtlwifi: rtl8723be: fix comparison to bool warning in hw.cZheng Bin
Fixes coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c:861:6-35: WARNING: Comparison to bool Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918102505.16036-10-zhengbin13@huawei.com
2020-09-21rtlwifi: rtl8192de: fix comparison to bool warning in hw.cZheng Bin
Fixes coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:566:14-20: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:572:13-19: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:581:14-20: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:587:13-19: WARNING: Comparison to bool Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918102505.16036-9-zhengbin13@huawei.com
2020-09-21rtlwifi: rtl8192ce: fix comparison to bool warning in hw.cZheng Bin
Fixes coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:616:14-20: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:621:13-19: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:626:14-20: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:631:13-19: WARNING: Comparison to bool Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918102505.16036-8-zhengbin13@huawei.com
2020-09-21rtlwifi: rtl8192cu: fix comparison to bool warning in hw.cZheng Bin
Fixes coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:831:14-49: WARNING: Comparison to bool Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918102505.16036-7-zhengbin13@huawei.com
2020-09-21rtlwifi: rtl8821ae: fix comparison to bool warning in phy.cZheng Bin
Fixes coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:1816:5-13: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:1825:5-13: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:1839:5-13: WARNING: Comparison to bool Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918102505.16036-6-zhengbin13@huawei.com
2020-09-21rtlwifi: rtl8821ae: fix comparison to bool warning in hw.cZheng Bin
Fixes coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:1897:5-13: WARNING: Comparison to bool Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918102505.16036-5-zhengbin13@huawei.com
2020-09-21rtlwifi: rtl8192cu: fix comparison to bool warning in mac.cZheng Bin
Fixes coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:161:14-17: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:168:13-16: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:179:14-17: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:186:13-16: WARNING: Comparison to bool Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918102505.16036-4-zhengbin13@huawei.com
2020-09-21rtlwifi: rtl8192c: fix comparison to bool warning in phy_common.cZheng Bin
Fixes coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c:1106:14-18: WARNING: Comparison to bool Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918102505.16036-3-zhengbin13@huawei.com
2020-09-21rtlwifi: rtl8192ee: fix comparison to bool warning in hw.cZheng Bin
Fixes coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c:797:6-33: WARNING: Comparison to bool Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918102505.16036-2-zhengbin13@huawei.com
2020-09-21net: wilc1000: clean up resource in error path of init mon interfaceHuang Guobin
The wilc_wfi_init_mon_int() forgets to clean up resource when register_netdevice() failed. Add the missed call to fix it. And the return value of netdev_priv can't be NULL, so remove the unnecessary error handling. Fixes: 588713006ea4 ("staging: wilc1000: avoid the use of 'wilc_wfi_mon' static variable") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200917123019.206382-1-huangguobin4@huawei.com
2020-09-21ssb: Remove meaningless jump label to simplify the codeJing Xiangfeng
The out jump label has nothing to do. So remove it to simplify the code. Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200915020330.96067-1-jingxiangfeng@huawei.com
2020-09-21clk: tegra: Fix missing prototype for tegra210_clk_register_emc()Thierry Reding
Include the Tegra driver's clk.h to pull in the prototype definition for this function so that compilers don't warn about it being missing. Fixes: 0ac65fc946d3 ("clk: tegra: Implement Tegra210 EMC clock") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-21clk: tegra: Always program PLL_E when enabledThierry Reding
Commit bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs") added checks to avoid enabling PLLs that have already been enabled by the bootloader. However, the PLL_E configuration inherited from the bootloader isn't necessarily the one that is needed for the kernel. This can cause SATA to fail like this: [ 5.310270] phy phy-sata.6: phy poweron failed --> -110 [ 5.315604] tegra-ahci 70027000.sata: failed to power on AHCI controller: -110 [ 5.323022] tegra-ahci: probe of 70027000.sata failed with error -110 Fix this by always programming the PLL_E. This ensures that any mis- configuration by the bootloader will be overwritten by the kernel. Fixes: bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs") Reported-by: LABBE Corentin <clabbe@baylibre.com> Tested-by: Corentin Labbe <clabbe@baylibre.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-21clk: tegra: Capitalization fixesThierry Reding
HW, XUSB and PLL are abbreviations and should be all-uppercase. Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-21i2c: i801: Exclude device from suspend direct complete optimizationJean Delvare
By default, PCI drivers with runtime PM enabled will skip the calls to suspend and resume on system PM. For this driver, we don't want that, as we need to perform additional steps for system PM to work properly on all systems. So instruct the PM core to not skip these calls. Fixes: a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM") Reported-by: Volker Rümelin <volker.ruemelin@googlemail.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21dmabuf: fix NULL pointer dereference in dma_buf_release()Charan Teja Reddy
NULL pointer dereference is observed while exporting the dmabuf but failed to allocate the 'struct file' which results into the dropping of the allocated dentry corresponding to this file in the dmabuf fs, which is ending up in dma_buf_release() and accessing the uninitialzed dentry->d_fsdata. Call stack on 5.4 is below: dma_buf_release+0x2c/0x254 drivers/dma-buf/dma-buf.c:88 __dentry_kill+0x294/0x31c fs/dcache.c:584 dentry_kill fs/dcache.c:673 [inline] dput+0x250/0x380 fs/dcache.c:859 path_put+0x24/0x40 fs/namei.c:485 alloc_file_pseudo+0x1a4/0x200 fs/file_table.c:235 dma_buf_getfile drivers/dma-buf/dma-buf.c:473 [inline] dma_buf_export+0x25c/0x3ec drivers/dma-buf/dma-buf.c:585 Fix this by checking for the valid pointer in the dentry->d_fsdata. Fixes: 4ab59c3c638c ("dma-buf: Move dma_buf_release() from fops to dentry_ops") Cc: <stable@vger.kernel.org> [5.7+] Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/391319/ Signed-off-by: Christian König <christian.koenig@amd.com>
2020-09-21can: mcp25xxfd: add listen-only modeKurt Van Dijck
This commit enables listen-only mode, which works internally like CANFD mode. Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200918172536.2074504-5-mkl@pengutronix.de
2020-09-21can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CANMarc Kleine-Budde
This patch adds support for the Microchip MCP25xxFD SPI CAN controller family. Tested-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200918172536.2074504-4-mkl@pengutronix.de
2020-09-21can: mcp25xxfd: add regmap infrastructureMarc Kleine-Budde
This patch adds the regmap infrastructure for the Microchip MCP25xxFD SPI CAN controller family. The actual driver is added in the next commit. Tested-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200918172536.2074504-3-mkl@pengutronix.de
2020-09-21can: rx-offload: can_rx_offload_add_manual(): add new initialization functionMarc Kleine-Budde
This patch adds a new initialization function: can_rx_offload_add_manual() It should be used to add support rx-offload to a driver, if the callback mechanism should not be used. Use e.g. can_rx_offload_queue_sorted() to queue skbs into rx-offload. Link: https://lore.kernel.org/r/20200915223527.1417033-33-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mscan: simplify clock enable/disableZhang Changzhong
All the NULL checks are pointless, clk_*() routines already deal with NULL just fine. Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1594972875-27631-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mscan: mpc5xxx_can: update contact emailWolfram Sang
The 'pengutronix' address is defunct for years. Use the proper contact address. Signed-off-by: Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20200502142657.19199-1-wsa@kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mcp251x: add support for half duplex controllersTim Harvey
Some SPI host controllers do not support full-duplex SPI and are marked as such via the SPI_CONTROLLER_HALF_DUPLEX controller flag. For such controllers use half duplex transactions but retain full duplex transactions for the controllers that can handle those. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Link: https://lore.kernel.org/r/1595516275-1179-1-git-send-email-tharvey@gateworks.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mcp251x: Use readx_poll_timeout() helperAndy Shevchenko
We may use special helper macro to poll IO till condition or timeout occurs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200217161038.25009-1-andriy.shevchenko@linux.intel.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mcp251x: add GPIO supportTimo Schlüßler
The mcp251x variants feature 3 general purpose digital inputs and 2 outputs. With this patch they are accessible through the gpio framework. Signed-off-by: Timo Schlüßler <schluessler@krause.de> Tested-by: Timo Schlüßler <schluessler@krause.de> Link: https://lore.kernel.org/r/20200915223527.1417033-28-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mcp251x: sort include files alphabeticallyMarc Kleine-Budde
This patch sorts the include files alphabetically. Link: https://lore.kernel.org/r/20200915223527.1417033-27-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: spi: Kconfig: remove unneeded dependencies form Kconfig symbolsMarc Kleine-Budde
Since commits 653ee35ce6d5 ("can: hi311x: remove custom DMA mapped buffer") Fixes: df58525df395 ("can: mcp251x: remove custom DMA mapped buffer") both the hi3111x and the mcp251x driver don't make use of the DMA API any more. So we can safely remove the HAS_DMA dependency. While we're here, remove the unneeded CAN_DEV and SPI dependencies from the CAN_HI311X symbol, as the parent menus already have these dependencies. Link: https://lore.kernel.org/r/20200915223527.1417033-24-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: pcan_usb: add support of rxerr/txerr countersStephane Grosjean
This patch adds the support of the rx/tx errors CAN counters to the driver of the PCAN-USB PC-CAN interface from PEAK-System GmbH. The PCAN-USB is capable of giving back the values of the rx/tx errors counters, to provide more details and statistics to the linux-can layer. Getting these values allows the driver to better tune CAN_ERR_CRTL_TX_xxx and CAN_ERR_CRTL_RX_xxx bits in case of the interface enters any CAN_STATE_ERROR_xxx state. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20191206153803.17725-3-s.grosjean@peak-system.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: pcan_usb: Document the commands sent to the deviceStephane Grosjean
This patch documents the functions and numbers of the commands sent by the driver to the PCAN-USB CAN device from PEAK-System GmbH. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20191206153803.17725-2-s.grosjean@peak-system.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: pch_can: use generic power managementVaibhav Gupta
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions, as through the generic framework PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Link: https://lore.kernel.org/r/20200728085757.888620-1-vaibhavgupta40@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: peak_canfd: Remove unused macrosWang Hai
CANFD_CLK_SEL_DIV_MASK and CANFD_OPTIONS_SET are never used after they were introduced. Remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20200904131247.23021-1-wanghai38@huawei.com [mkl: keep CANFD_CLK_SEL_DIV_MASK for documentation purpose] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: peak_usb: convert to use le32_add_cpu()Liu Shixin
Convert cpu_to_le32(le32_to_cpu(E1) + E2) to use le32_add_cpu(). Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20200914041744.3701840-1-liushixin2@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: ti_hecc: convert to devm_platform_ioremap_resource_byname()Dejin Zheng
Use the function devm_platform_ioremap_resource_byname() to simplify source code which calls the functions platform_get_resource_byname() and devm_ioremap_resource(). Remove also a few error messages which became unnecessary with this software refactoring. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Link: https://lore.kernel.org/r/20200420132207.8536-1-zhengdejin5@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mscan: mark expected switch fall-throughMarc Kleine-Budde
As -Wimplicit-fallthrough is now enabled the mscan driver shows this warning, which is fixed by this patch: drivers/net/can/mscan/mscan.c: In function ‘mscan_start_xmit’: drivers/net/can/mscan/mscan.c:211:3: warning: this statement may fall through [-Wimplicit-fallthrough=] 211 | netif_stop_queue(dev); | ^~~~~~~~~~~~~~~~~~~~~ drivers/net/can/mscan/mscan.c:212:2: note: here 212 | case 2: | ^~~~ Link: https://lore.kernel.org/r/20200915223527.1417033-17-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mcba_usb: remove redundant initialization of variable errColin Ian King
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200706164240.518623-1-colin.king@canonical.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: c_can: Remove unused inline functionYueHaibing
commit 524369e2391f ("can: c_can: remove obsolete STRICT_FRAME_ORDERING Kconfig option") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200505084149.23848-1-yuehaibing@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: dev: can_bus_off(): print scheduling of restart if activatedMarc Kleine-Budde
If a CAN device goes into bus-off and has automatic restart enabled, inform user that a automatic restart is scheduled after the configured delay. Link: https://lore.kernel.org/r/20200915223527.1417033-14-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-09-18 14:09:31 +0000