summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-02-18i40e: enable mc magic pkt wakeup during power downJoshua Hay
This patch adds a call to the mac_address_write admin q function during power down to update the PRTPM_SAH/SAL registers with the MC_MAG_EN bit thus enabling multicast magic packet wakeup. A FW workaround is needed to write the multicast magic wake up enable bit in the PRTPM_SAH register. The FW expects the mac address write admin q cmd to be called first with one of the WRITE_TYPE_LAA flags and then with the multicast relevant flags. *Note: This solution only works for X722 devices currently. A PFR will clear the previously mentioned bit by default, but X722 has support for a WOL_PRESERVE_ON_PFR flag which prevents the bit from being cleared. Once other devices support this flag, this solution should work as well. Change-ID: I51bd5b8535bd9051c2676e27c999c1657f786827 Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-18i40e: fix disable overflow promiscuous modeAlan Brady
There exists a bug in which the driver is unable to exit overflow promiscuous mode after having added "too many" mac filters. It is expected that after triggering overflow promiscuous, removing the failed/extra filters should then disable overflow promiscuous mode. The bug exists because we were intentionally skipping the sync_vsi_filter path in cases where we were removing failed filters since they shouldn't have been added to the firmware in the first place, however we still need to go through the sync_vsi_filter code path to determine whether or not it is ok to exit overflow promiscuous mode. This patch fixes the bug by making sure we go through the sync_vsi_filter path in cases of failed filters. Change-ID: I634d249ca3e5fa50729553137c295e73e7722143 Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-18thermal: mtk_thermal: Staticise a number of data variablesVivek Gautam
Sparse throws following warnings: drivers/thermal/mtk_thermal.c:186:11: warning: symbol 'mt8173_bank_data' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:193:11: warning: symbol 'mt8173_msr' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:197:11: warning: symbol 'mt8173_adcpnp' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:201:11: warning: symbol 'mt8173_mux_values' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:204:11: warning: symbol 'mt2701_bank_data' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:208:11: warning: symbol 'mt2701_msr' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:212:11: warning: symbol 'mt2701_adcpnp' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:216:11: warning: symbol 'mt2701_mux_values' was not declared. Should it be static? Make these variables as static to fix these warnings. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-02-18thermal: arm: dra752: Remove all TSHUT related definitionsKeerthy
No configuration needs to be done for TSHUT from software. Hence remove all the unnecessary definitions. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-02-18thermal: arm: dra752: Remove TSHUT configurationKeerthy
Technical Reference Manual [1] mandates that software should not be configuring the thermal shutdown thresholds. Hence removing TSHUT_CONFIG. [1] http://www.ti.com/lit/ug/sprui30b/sprui30b.pdf Signed-off-by: Keerthy <j-keerthy@ti.com> Reported-by: Ravikumar Kattekola <rk@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-02-18thermal: ti-soc-thermal: Remove CPU_THERMAL Dependency from TI_THERMALKeerthy
Currently when CPU_THERMAL is not defined the thermal sensors are not even exposed consequently no cooling is possible. CPU_THERMAL eventually depends on CPUFREQ. CPPUFREQ is not the only cooling for CPU. The thermal shutdown for critical temperatures is another cooling solution which will currently not get enabled if CPU_THERMAL is not defined. Remove this dependency so as to have the last level of thermal protection working even without CPUFREQ defined. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-02-18Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Two more bugfixes that came in during this week: - a defconfig change to enable a vital driver used on some Qualcomm based phones. This was already queued for 4.11, but the maintainer asked to have it in 4.10 after all. - a regression fix for the reset controller framework, this got broken by a typo in the 4.10 merge window" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: multi_v7_defconfig: enable Qualcomm RPMCC reset: fix shared reset triggered_count decrement on error
2017-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix leak in dpaa_eth error paths, from Dan Carpenter. 2) Use after free when using IPV6_RECVPKTINFO, from Andrey Konovalov. 3) fanout_release() cannot be invoked from atomic contexts, from Anoob Soman. 4) Fix bogus attempt at lockdep annotation in IRDA. 5) dev_fill_metadata_dst() can OOP on a NULL dst cache pointer, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: irda: Fix lockdep annotations in hashbin_delete(). vxlan: fix oops in dev_fill_metadata_dst dccp: fix freeing skb too early for IPV6_RECVPKTINFO dpaa_eth: small leak on error packet: Do not call fanout_release from atomic contexts
2017-02-18thermal: imx: Fix possible NULL dereference.Shailendra Verma
of_device_get_match_data could return NULL, and so can cause a NULL pointer dereference later. Signed-off-by: Shailendra Verma <shailendra.v@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-02-18thermal: exynos: Remove parsing unused samsung,tmu_cal_mode propertyKrzysztof Kozlowski
The property samsung,tmu_cal_mode is not used and not used. We can safely remove it. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-02-18thermal: zx2967: add thermal driver for ZTE's zx2967 familyBaoyou Xie
This patch adds thermal driver for ZTE's zx2967 family. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-02-19btmrvl: fix spelling mistake: "actived" -> "activated"Colin Ian King
trivial fix to spelling mistake in error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-18Bluetooth: hci_qca: fix spelling mistake: "Spurrious" -> "Spurious"Colin Ian King
trivial fix to spelling mistake in error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-18drm/tinydrm: Add support for Multi-Inno MI0283QT displayNoralf Trønnes
Add driver to support the Multi-Inno MI0283QT display panel. It has an ILI9341 MIPI DBI compatible display controller. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Thierry Reding <treding@nvidia.com>
2017-02-18drm/tinydrm: Add MIPI DBI supportNoralf Trønnes
Add support for MIPI DBI compatible controllers. Interface type C option 1 and 3 are supported (SPI). Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Thierry Reding <treding@nvidia.com>
2017-02-18drm/tinydrm: Add helper functionsNoralf Trønnes
Add common functionality needed by many tinydrm drivers. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thierry Reding <treding@nvidia.com>
2017-02-18drm: Add DRM support for tiny LCD displaysNoralf Trønnes
tinydrm provides helpers for very simple displays that can use CMA backed framebuffers and need flushing on changes. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thierry Reding <treding@nvidia.com>
2017-02-18PM / QoS: Fix memory leak on resume_latency.notifiersJohn Keeping
Since commit 2d984ad132a8 (PM / QoS: Introcuce latency tolerance device PM QoS type) we reassign "c" to point at qos->latency_tolerance before freeing c->notifiers, but the notifiers field of latency_tolerance is never used. Restore the original behaviour of freeing the notifiers pointer on qos->resume_latency, which is used, and fix the following kmemleak warning. unreferenced object 0xed9dba00 (size 64): comm "kworker/0:1", pid 36, jiffies 4294670128 (age 15202.983s) hex dump (first 32 bytes): 00 00 00 00 04 ba 9d ed 04 ba 9d ed 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<c06f6084>] kmemleak_alloc+0x74/0xb8 [<c011c964>] kmem_cache_alloc_trace+0x170/0x25c [<c035f448>] dev_pm_qos_constraints_allocate+0x3c/0xe4 [<c035f574>] __dev_pm_qos_add_request+0x84/0x1a0 [<c035f6cc>] dev_pm_qos_add_request+0x3c/0x54 [<c03c3fc4>] usb_hub_create_port_device+0x110/0x2b8 [<c03b2a60>] hub_probe+0xadc/0xc80 [<c03bb050>] usb_probe_interface+0x1b4/0x260 [<c035773c>] driver_probe_device+0x198/0x40c [<c0357b14>] __device_attach_driver+0x8c/0x98 [<c0355bbc>] bus_for_each_drv+0x8c/0x9c [<c0357494>] __device_attach+0x98/0x138 [<c0357c64>] device_initial_probe+0x14/0x18 [<c03569dc>] bus_probe_device+0x30/0x88 [<c0354c54>] device_add+0x430/0x554 [<c03b92d8>] usb_set_configuration+0x660/0x6fc Fixes: 2d984ad132a8 (PM / QoS: Introcuce latency tolerance device PM QoS type) Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-17drm/amd/amdgpu: post card if there is real hw resetting performedJim Qu
Check whether we need to post rather than whether the asic is posted. There are some cases (e.g., GPU reset or resume from hibernate) where we need to force post even if the asic has been posted. Signed-off-by: Jim Qu <Jim.Qu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-02-17Merge branch 'for-4.11/next' into for-4.11/linus-mergeJens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17Merge branch 'for-4.11/block' into for-4.11/linus-mergeJens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-18Merge tag 'drm-intel-next-fixes-2017-02-17' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-intel into drm-next i915 and GVT fixes for v4.11 merge window * tag 'drm-intel-next-fixes-2017-02-17' of git://anongit.freedesktop.org/git/drm-intel: (32 commits) drm/i915: Fix not finding the VBT when it overlaps with OPREGION_ASLE_EXT drm/i915: Pass timeout==0 on to i915_gem_object_wait_fence() drm/i915/gvt: Disable access to stolen memory as a guest drm/i915: Avoid spurious WARNs about the wrong pipe in the PPS code drm/i915: Check for timeout completion when waiting for the rq to submitted drm/i915: A hotfix for making aliasing PPGTT work for GVT-g drm/i915: Restore context and pd for ringbuffer submission after reset drm/i915: Let execlist_update_context() cover !FULL_PPGTT mode. drm/i915/lspcon: Fix resume time initialization due to unasserted HPD drm/i915/gen9+: Enable hotplug detection early drm/i915: Reject set-tiling-ioctl with stride==0 and a tiling mode drm/i915: Recreate internal objects with single page segments if dmar fails drm/i915/gvt: return error code if dma map iova failed drm/i915/gvt: optimize the inhibit context mmio load drm/i915/gvt: add sprite plane flip done support. drm/i915/gvt: add missing display part reset for vGPU reset drm/i915/gvt: Fix shadow context descriptor drm/i915/gvt: Fix alignment for GTT allocation drm/i915/gvt: fix crash at function release_shadow_wa_ctx drm/i915/gvt: enable IOMMU for gvt ...
2017-02-17vxlan: fix oops in dev_fill_metadata_dstPaolo Abeni
Since the commit 0c1d70af924b ("net: use dst_cache for vxlan device") vxlan_fill_metadata_dst() calls vxlan_get_route() passing a NULL dst_cache pointer, so the latter should explicitly check for valid dst_cache ptr. Unfortunately the commit d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel") removed said check. As a result is possible to trigger a null pointer access calling vxlan_fill_metadata_dst(), e.g. with: ovs-vsctl add-br ovs-br0 ovs-vsctl add-port ovs-br0 vxlan0 -- set interface vxlan0 \ type=vxlan options:remote_ip=192.168.1.1 \ options:key=1234 options:dst_port=4789 ofport_request=10 ip address add dev ovs-br0 172.16.1.2/24 ovs-vsctl set Bridge ovs-br0 ipfix=@i -- --id=@i create IPFIX \ targets=\"172.16.1.1:1234\" sampling=1 iperf -c 172.16.1.1 -u -l 1000 -b 10M -t 1 -p 1234 This commit addresses the issue passing to vxlan_get_route() the dst_cache already available into the lwt info processed by vxlan_fill_metadata_dst(). Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17PCI/MSI: Fix msi_desc->affinity memory leak when freeing MSI IRQsPrarit Bhargava
During device setup, msix_setup_entries() and msi_setup_entry() allocate msi_desc by calling alloc_msi_entry(). alloc_msi_entry() can also allocate a affinity cpumask. During device teardown free_msi_irqs() is called and the msi_desc is freed, but the affinity cpumask is leaked. Fix it by calling free_msi_entry() which frees both the msi_desc and the affinity cpumask. [bhelgaas: aa48b6f70886 ("genirq/MSI: Move alloc_msi_entry() from PCI into generic MSI code") moved alloc_msi_entry() from drivers/pci/msi.c to kernel/irq/msi.c and added a new corresponding free_msi_entry() interface. After aa48b6f70886, pci/msi.c used alloc_msi_entry(), but did its own kfree() instead of using free_msi_entry(). 28f4b04143c5 ("genirq/msi: Add cpumask allocation to alloc_msi_entry") added affinity to both alloc_msi_entry() and free_msi_entry(), but pci/msi.c didn't use free_msi_entry(), resulting in this leak.] Fixes: aa48b6f70886 ("genirq/MSI: Move alloc_msi_entry() from PCI into generic MSI code") Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Myron Stowe <mstowe@redhat.com>
2017-02-17sfc: do not device_attach if a reset is pendingPeter Dunning
efx_start_all can return without initialising queues as a reset is pending. This means that when netif_device_attach is called, the kernel can start sending traffic without having an initialised TX queue to send to. This patch avoids this by not calling netif_device_attach if there is a pending reset. Fixes: e283546c0465 ("sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast)") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17sfc: forget filters from sw table if hw replies ENOENT on removing themBert Kenward
If the hw doesn't think they exist, we should defer to its authority. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17sfc: fix filter_id misinterpretation in edge caseJon Cooper
On EF10, hardware filter IDs are 13 bits, but in some places we store 32-bit "full filter IDs" in which higher order bits encode the filter match-priority. This could cause a filter to have a full filter ID of 0xffff, which is also the value EFX_EF10_FILTER_ID_INVALID which we use in 16-bit "short" filter IDs (without match-priority bits). This would occur if the hardware filter ID was 0x1fff and the match-priority was 7. Unfortunately, some code that checks for EFX_EF10_FILTER_ID_INVALID can be called on full filter IDs, and will WARN_ON if this ever happens. So, since we have plenty of spare bits in the full filter ID, this patch shifts the priority bits left one bit when constructing the full filter IDs, ensuring that the 0x2000 bit of a full filter ID will always be 0 and thus no full filter ID can ever equal EFX_EF10_FILTER_ID_INVALID. This patch also replaces open-coded full<->short filter ID conversions with calls to functions, thus keeping the definition of the full filter ID format in one place. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17vmxnet3: prevent building with 64K pagesArnd Bergmann
I got a warning about broken code on ARM64 with 64K pages: drivers/net/vmxnet3/vmxnet3_drv.c: In function 'vmxnet3_rq_init': drivers/net/vmxnet3/vmxnet3_drv.c:1679:29: error: large integer implicitly truncated to unsigned type [-Werror=overflow] rq->buf_info[0][i].len = PAGE_SIZE; 'len' here is a 16-bit integer, so this clearly won't work. I don't think this driver is used much on anything other than x86, so there is no need to fix this properly and we can work around it with a Kconfig dependency to forbid known-broken configurations. qemu in theory supports it on other architectures too, but presumably only for compatibility with x86 guests that also run on vmware. CONFIG_PAGE_SIZE_64KB is used on hexagon, mips, sh and tile, the other symbols are architecture-specific names for the same thing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/wan: add MODULE_LICENSE for fsl_ucc_hdlcValentin Longchamp
It is required to build it as a module. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17PCI: altera: Extract TLP completion status correctlyYadi Hu
Previously we extracted 'Completion Status' from b14:12, but it is actually b15:13. Extract it from the correct bits. Signed-off-by: Hu Yadi<yadi.hu@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-02-17PCI: rockchip: Set vendor ID from local core config spaceShawn Lin
The TRM says the vendor ID in the RC's configure space can be rewritten and the value must be the same as the value read from the local core configure space. But we misread that and didn't notice it before. Actually we should only able to rewrite it from the local core configure space. Fix that issue to make lspci show the correct IP vendor infomation. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-17nfp: Use PCI_DEVICE_ID_NETRONOME_NFP* definesSimon Horman
Use PCI_DEVICE_ID_NETRONOME_NFP*, defined in linux/pci_ids.h, rather than replicating the same values in the NFP driver. Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17netvsc: fix typo on statisticsSimon Xiao
Return the correct tx_errors stats in netvsc. Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Simon Xiao <sixiao@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17PCI: Add ACS quirk for Qualcomm QDF2400 and QDF2432Sinan Kaya
The Qualcomm QDF2xxx root ports don't advertise an ACS capability, but they do provide ACS-like features to disable peer transactions and validate bus numbers in requests. To be specific: * Hardware supports source validation but it will report the issue as Completer Abort instead of ACS Violation. * Hardware doesn't support peer-to-peer and each root port is a root complex with unique segment numbers. * It is not possible for one root port to pass traffic to the other root port. All PCIe transactions are terminated inside the root port. Add an ACS quirk for the QDF2400 and QDF2432 products. [bhelgaas: changelog] Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2017-02-17PCI: hv: Use device serial number as PCI domainHaiyang Zhang
Use the device serial number as the PCI domain. The serial numbers start with 1 and are unique within a VM. So names, such as VF NIC names, that include domain number as part of the name, can be shorter than that based on part of bus UUID previously. The new names will also stay same for VMs created with copied VHD and same number of devices. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
2017-02-17nvme: Check for Security send/recv support before issuing commands.Scott Bauer
We need to verify that the controller supports the security commands before actually trying to issue them. Signed-off-by: Scott Bauer <scott.bauer@intel.com> [hch: moved the check so that we don't call into the OPAL code if not supported] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17block/sed-opal: allocate struct opal_dev dynamicallyChristoph Hellwig
Insted of bloating the containing structure with it all the time this allocates struct opal_dev dynamically. Additionally this allows moving the definition of struct opal_dev into sed-opal.c. For this a new private data field is added to it that is passed to the send/receive callback. After that a lot of internals can be made private as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Scott Bauer <scott.bauer@intel.com> Reviewed-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17net: qlogic: netxen: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net: hamachi: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net: bgmac: store MAC address directly in netdev->dev_addrTobias Klauser
After commit 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it") the mac_addr member of struct bgmac is no longer necessary to pass the MAC address to bgmac_enet_probe(). Instead it can directly be stored in netdev->dev_addr. Also use eth_hw_addr_random() instead of eth_random_addr() in case a random MAC is nedded. This will make sure netdev->addr_assign_type will be properly set. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17Merge tag 'wireless-drivers-next-for-davem-2017-02-16' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.11 Mostly small fixes, not really any new features. Major changes: ath10k * when trying older firmware versions don't confuse user with error messages ath9k * fix crash in AP mode (regression) * fix relayfs crash (regression) * fix initialisation with AR9340 and AR9550 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "Just a single change to Elan touchpad driver to recognize a new ACPI ID" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ELAN0605 to the ACPI table
2017-02-17Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "I2C has a revert to fix a regression" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: designware: detect when dynamic tar update is possible"
2017-02-17Merge tag 'mmc-v4.10-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "Fix multi-bit bus width without high-speed mode for MMC" * tag 'mmc-v4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: fix multi-bit bus width without high-speed mode
2017-02-17Merge tag 'ntb-4.10-bugfixes' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB bugfixes frfom Jon Mason: "NTB bug fixes to address a crash when unloading the ntb module, a DMA engine unmap leak, allowing the proper queue choice, and clearing the SKX irq bit" * tag 'ntb-4.10-bugfixes' of git://github.com/jonmason/ntb: ntb: ntb_hw_intel: link_poll isn't clearing the pending status properly ntb_transport: Pick an unused queue ntb: ntb_perf missing dmaengine_unmap_put NTB: ntb_transport: fix debugfs_remove_recursive
2017-02-17net: ethoc: Use eth_hw_addr_random()Tobias Klauser
Use eth_hw_addr_random() to set a random dev_addr and update addr_assign_type instead of open-coding it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17dpaa_eth: small leak on errorDan Carpenter
This should be >= instead of > here. It means that we don't increment the free count enough so it becomes off by one. Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net: mvneta: make mvneta_eth_tool_ops staticJisheng Zhang
The mvneta_eth_tool_ops is only used internally in mvneta driver, so make it static. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net: oki-semi: pch_gbe: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17Merge tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux ↵Arnd Bergmann
into fixes Pull "Reset controller fixes for v4.10" from Philipp Zabel: - Remove erroneous negation of the error check of the reset function to decrement trigger_count in the error case, not on success. This fixes shared resets to actually only trigger once, as intended. * tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux: reset: fix shared reset triggered_count decrement on error
generated by cgit (git 2.34.1) at 2025-09-13 15:24:28 +0000