| Age | Commit message (Collapse) | Author |
|---|
|
The selftests added to our CI by Bui Quang Minh recently reveals
that there is a mem leak on the error path of virtnet_xsk_pool_enable():
unreferenced object 0xffff88800a68a000 (size 2048):
comm "xdp_helper", pid 318, jiffies 4294692778
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
__kvmalloc_node_noprof+0x402/0x570
virtnet_xsk_pool_enable+0x293/0x6a0 (drivers/net/virtio_net.c:5882)
xp_assign_dev+0x369/0x670 (net/xdp/xsk_buff_pool.c:226)
xsk_bind+0x6a5/0x1ae0
__sys_bind+0x15e/0x230
__x64_sys_bind+0x72/0xb0
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Acked-by: Jason Wang <jasowang@redhat.com>
Fixes: e9f3962441c0 ("virtio_net: xsk: rx: support fill with xsk buffer")
Link: https://patch.msgid.link/20250430163836.3029761-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 4bc12818b363 ("virtio-net: disable delayed refill when pausing rx")
fixed a deadlock between reconfig paths and refill work trying to disable
the same NAPI instance. The refill work can't run in parallel with reconfig
because trying to double-disable a NAPI instance causes a stall under the
instance lock, which the reconfig path needs to re-enable the NAPI and
therefore unblock the stalled thread.
There are two cases where we re-enable refill too early. One is in the
virtnet_set_queues() handler. We call it when installing XDP:
virtnet_rx_pause_all(vi);
...
virtnet_napi_tx_disable(..);
...
virtnet_set_queues(..);
...
virtnet_rx_resume_all(..);
We want the work to be disabled until we call virtnet_rx_resume_all(),
but virtnet_set_queues() kicks it before NAPIs were re-enabled.
The other case is a more trivial case of mis-ordering in
__virtnet_rx_resume() found by code inspection.
Taking the spin lock in virtnet_set_queues() (requested during review)
may be unnecessary as we are under rtnl_lock and so are all paths writing
to ->refill_enabled.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Fixes: 4bc12818b363 ("virtio-net: disable delayed refill when pausing rx")
Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()")
Link: https://patch.msgid.link/20250430163758.3029367-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main changes are once more for the NXP i.MX platform, addressing
multiple regressions in recent devicetree updates for the i.MX8MM and
i.MX6ULL SoCs, a PCIe fix for i.MX9 and a MAINTAINERS file update to
disambiguate NXP i.MX SoCs from Sony IMX image sensors.
The stm32 platform devicetree files get some compatibility fixes for
the interrupt controller node.
Another compatibility fix is done for the Arm Morello platform's cache
controller node.
The code changes are all for firmware drivers, fixing kernel-side bugs
on the Arm FF-A and SCMI drivers"
* tag 'soc-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp23 SoCs
arm64: dts: st: Adjust interrupt-controller for stm32mp23 SoCs
arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp21 SoCs
arm64: dts: st: Adjust interrupt-controller for stm32mp21 SoCs
arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp25 SoCs
arm64: dts: st: Adjust interrupt-controller for stm32mp25 SoCs
arm64: dts: imx8mm-verdin: Link reg_usdhc2_vqmmc to usdhc2
MAINTAINERS: add exclude for dt-bindings to imx entry
ARM: dts: opos6ul: add ksz8081 phy properties
arm64: dts: imx95: Correct the range of PCIe app-reg region
arm64: dts: imx8mp: configure GPU and NPU clocks in nominal DTSI
arm64: dts: morello: Fix-up cache nodes
firmware: arm_ffa: Skip Rx buffer ownership release if not acquired
firmware: arm_scmi: Fix timeout checks on polling path
firmware: arm_scmi: Balance device refcount when destroying devices
|
|
Event polling delay is set to 0 if there are any pending requests in
either rx or tx requests lists. Checking for pending requests does
not work well for "IN" transfers as the tty driver always queues
requests to the list and TRBs to the ring, preparing to receive data
from the host.
This causes unnecessary busylooping and cpu hogging.
Only set the event polling delay to 0 if there are pending tx "write"
transfers, or if it was less than 10ms since last active data transfer
in any direction.
Cc: Łukasz Bartosik <ukaszb@chromium.org>
Fixes: fb18e5bb9660 ("xhci: dbc: poll at different rate depending on data transfer activity")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250505125630.561699-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
VIA VL805 doesn't bother updating the EP Context cycle bit when the
endpoint halts. This is seen by patching xhci_move_dequeue_past_td()
to print the cycle bits of the EP Context and the TRB at hw_dequeue
and then disconnecting a flash drive while reading it. Actual cycle
state is random as expected, but the EP Context bit is always 1.
This means that the cycle state produced by this function is wrong
half the time, and then the endpoint stops working.
Work around it by looking at the cycle bit of TD's end_trb instead
of believing the Endpoint or Stream Context. Specifically:
- rename cycle_found to hw_dequeue_found to avoid confusion
- initialize new_cycle from td->end_trb instead of hw_dequeue
- switch new_cycle toggling to happen after end_trb is found
Now a workload which regularly stalls the device works normally for
a few hours and clearly demonstrates the HW bug - the EP Context bit
is not updated in a new cycle until Set TR Dequeue overwrites it:
[ +0,000298] sd 10:0:0:0: [sdc] Attached SCSI disk
[ +0,011758] cycle bits: TRB 1 EP Ctx 1
[ +5,947138] cycle bits: TRB 1 EP Ctx 1
[ +0,065731] cycle bits: TRB 0 EP Ctx 1
[ +0,064022] cycle bits: TRB 0 EP Ctx 0
[ +0,063297] cycle bits: TRB 0 EP Ctx 0
[ +0,069823] cycle bits: TRB 0 EP Ctx 0
[ +0,063390] cycle bits: TRB 1 EP Ctx 0
[ +0,063064] cycle bits: TRB 1 EP Ctx 1
[ +0,062293] cycle bits: TRB 1 EP Ctx 1
[ +0,066087] cycle bits: TRB 0 EP Ctx 1
[ +0,063636] cycle bits: TRB 0 EP Ctx 0
[ +0,066360] cycle bits: TRB 0 EP Ctx 0
Also tested on the buggy ASM1042 which moves EP Context dequeue to
the next TRB after errors, one problem case addressed by the rework
that implemented this loop. In this case hw_dequeue can be enqueue,
so simply picking the cycle bit of TRB at hw_dequeue wouldn't work.
Commit 5255660b208a ("xhci: add quirk for host controllers that
don't update endpoint DCS") tried to solve the stale cycle problem,
but it was more complex and got reverted due to a reported issue.
Cc: Jonathan Bell <jonathan@raspberrypi.org>
Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250505125630.561699-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After commit 653d7825c149 ("dcssblk: mark DAX broken, remove FS_DAX_LIMITED
support") moved the "select DAX" from config DCSSBLK to the new config
DCSSBLK_DAX, randconfig tests could result in build errors like this:
s390-linux-ld: drivers/s390/block/dcssblk.o: in function `dcssblk_shared_store':
drivers/s390/block/dcssblk.c:417: undefined reference to `kill_dax'
s390-linux-ld: drivers/s390/block/dcssblk.c:418: undefined reference to `put_dax'
This is because it's now possible to have CONFIG_DCSSBLK=y, but CONFIG_DAX=m.
Fix this by adding "depends on DAX || DAX=n" to config DCSSBLK, to make it
explicit that we want either no DAX, or the same "y/m" for both config DAX
and DCSSBLK, similar to config BLK_DEV_DM.
This also requires removing the "select DAX" from config DCSSBLK_DAX, or
else there would be a recursive dependency detected. DCSSBLK_DAX is marked
as BROKEN at the moment, and won't work well with DAX anyway, so it doesn't
really matter if it is selected.
Fixes: 653d7825c149 ("dcssblk: mark DAX broken, remove FS_DAX_LIMITED support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504291604.pvjonhWX-lkp@intel.com/
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
On x86 during boot, clockevent_i8253_disable() can be invoked via
x86_late_time_init -> hpet_time_init() -> pit_timer_init() which happens
with enabled interrupts.
If some of the old i8253 hardware is actually used then lockdep will notice
that i8253_lock is used in hard interrupt context. This causes lockdep to
complain because it observed the lock being acquired with interrupts
enabled and in hard interrupt context.
Make clockevent_i8253_disable() acquire the lock with
raw_spinlock_irqsave() to cure this.
[ tglx: Massage change log and use guard() ]
Fixes: c8c4076723dac ("x86/timer: Skip PIT initialization on modern chipsets")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250404133116.p-XRWJXf@linutronix.de
|
|
Some file systems do not support read_iter/write_iter, such as selinuxfs
in this issue.
So before calling them, first confirm that the interface is supported and
then call it.
It is releavant in that vfs_iter_read/write have the check, and removal
of their used caused szybot to be able to hit this issue.
Fixes: f2fed441c69b ("loop: stop using vfs_iter__{read,write} for buffered I/O")
Reported-by: syzbot+6af973a3b8dfd2faefdc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6af973a3b8dfd2faefdc
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250428143626.3318717-1-lizhi.xu@windriver.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As seen in some recent failures, SLPC num_waiters value is < 0.
This happens because the inc/dec are not balanced. We should skip
decrement for the same conditions as the increment. Currently, we
do that for power saving profile mode. This patch also ensures that
num_waiters is incremented in the case min_softlimit is at boost
freq. It ensures that we don't reduce the frequency while this request
is in flight.
v2: Add Fixes tags
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13598
Fixes: f864a29afc32 ("drm/i915/slpc: Optmize waitboost for SLPC")
Fixes: 4a82ceb04ad4 ("drm/i915/slpc: Add sysfs for SLPC power profiles")
Cc: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Sk Anirban <sk.anirban@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250428183555.3250021-1-vinay.belgaumkar@intel.com
(cherry picked from commit d26e55085f4b7a63677670db827541209257b313)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Test the correct structure member when handling correctable errors
and avoid spurious interrupts, in altera_edac
* tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/altera: Set DDR and SDMMC interrupt mask before registration
EDAC/altera: Test the correct error reg offset
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Prevent NULL pointer dereference in msi_domain_debug_show()
- Fix crash in the qcom-mpm irqchip driver when configuring
interrupts for non-wake GPIOs
* tag 'irq-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
genirq/msi: Prevent NULL pointer dereference in msi_domain_debug_show()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
- imx-lpi2c: fix clock error handling sequence in probe
* tag 'i2c-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx-lpi2c: Fix clock count when probe defers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card"
* tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ASoC: amd: ps: fix for irq handler return status
ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
ASoC: stm32: sai: add a check on minimal kernel frequency
ASoC: stm32: sai: skip useless iterations on kernel rate loop
ALSA: hda/realtek - Add more HP laptops which need mute led fixup
ALSA: hda/realtek: Fix built-mic regression on other ASUS models
ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format
ALSA: usb-audio: Fix duplicated name in MIDI substream names
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx
ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013
ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure
ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot
ASoC: amd: acp: Fix NULL pointer deref on acp resume path
ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()
ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[]
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A fairly small pile of fixes, plus one new compatible string addition
to the Synopsis driver for a new platform.
The most notable thing is the fix for divide by zeros in spi-mem if an
operation has no dummy bytes"
* tag 'spi-fix-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: tegra114: Don't fail set_cs_timing when delays are zero
spi: spi-qpic-snand: fix NAND_READ_LOCATION_2 register handling
spi: spi-mem: Add fix to avoid divide error
spi: dt-bindings: snps,dw-apb-ssi: Add compatible for SOPHGO SG2042 SoC
spi: dt-bindings: snps,dw-apb-ssi: Merge duplicate compatible entry
spi: spi-qpic-snand: propagate errors from qcom_spi_block_erase()
spi: stm32-ospi: Fix an error handling path in stm32_ospi_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three recent regressions, two in cpufreq and one in the
Intel Soundwire driver, and an unchecked MSR access in the
intel_pstate driver:
- Fix a recent regression causing systems where frequency tables are
used by cpufreq to have issues with setting frequency limits
(Rafael Wysocki)
- Fix a recent regressions causing frequency boost settings to become
out-of-sync if platform firmware updates the registers associated
with frequency boost during system resume (Viresh Kumar)
- Fix a recent regression causing resume failures to occur in the
Intel Soundwire driver if the device handled by it is in runtime
suspend before a system-wide suspend (Rafael Wysocki)
- Fix an unchecked MSR aceess in the intel_pstate driver occurring
when CPUID indicates no turbo, but the driver attempts to enable
turbo frequencies due to a misleading value read from an MSR
(Srinivas Pandruvada)"
* tag 'pm-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
soundwire: intel_auxdevice: Fix system suspend/resume handling
cpufreq: Fix setting policy limits when frequency tables are used
cpufreq: ACPI: Re-sync CPU boost state on system resume
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, amdgpu and xe as usual, the new adp driver has a
bunch of vblank fixes, then a bunch of small fixes across the board.
Seems about the right level for this time in the release cycle.
ttm:
- docs warning fix
kunit
- fix leak in shmem tests
fdinfo:
- driver unbind race fix
amdgpu:
- Fix possible UAF in HDCP
- XGMI dma-buf fix
- NBIO 7.11 fix
- VCN 5.0.1 fix
xe:
- EU stall locking fix and disabling on VF
- Documentation fix kernel version supporting hwmon entries
- SVM fixes on error handling
i915:
- Fix build for CONFIG_DRM_I915_PXP=n
nouveau:
- fix race condition in fence handling
ivpu:
- interrupt handling fix
- D0i2 test mode fix
adp:
- vblank fixes
mipi-dbi:
- timing fix"
* tag 'drm-fixes-2025-05-03' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
drm/gpusvm: set has_dma_mapping inside mapping loop
drm/xe/hwmon: Fix kernel version documentation for temperature
drm/xe/eustall: Do not support EU stall on SRIOV VF
drm/xe/eustall: Resolve a possible circular locking dependency
drm/amdgpu: Add DPG pause for VCN v5.0.1
drm/amdgpu: Fix offset for HDP remap in nbio v7.11
drm/amdgpu: Fail DMABUF map of XGMI-accessible memory
drm/amd/display: Fix slab-use-after-free in hdcp
drm/mipi-dbi: Fix blanking for non-16 bit formats
drm/tests: shmem: Fix memleak
drm/xe/guc: Fix capture of steering registers
drm/xe/svm: fix dereferencing error pointer in drm_gpusvm_range_alloc()
drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFS
drm: adp: Remove pointless irq_lock spin lock
drm: adp: Enable vblank interrupts in crtc's .atomic_enable
drm: adp: Handle drm_crtc_vblank_get() errors
drm: adp: Use spin_lock_irqsave for drm device event_lock
drm/fdinfo: Protect against driver unbind
drm/ttm: fix the warning for hit_low and evict_low
accel/ivpu: Fix the D0i2 disable test mode
...
|
|
Merge cpufreq fixes for 6.15-rc5:
- Fix a recent regression causing systems where frequency tables are
used by cpufreq to have issues with setting frequency limits (Rafael
Wysocki).
- Fix a recent regressions causing frequency boost settings to become
out-of-sync if platform firmware updates the registers associated
with them during system resume (Viresh Kumar).
- Fix an unchecked MSR aceess in the intel_pstate driver occurring when
CPUID indicates no turbo, but the driver attempts to enable turbo
frequencies due to a misleading value read from an MSR (Srinivas
Pandruvada).
* pm-cpufreq:
cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
cpufreq: Fix setting policy limits when frequency tables are used
cpufreq: ACPI: Re-sync CPU boost state on system resume
|
|
When a CL/CSD job times out, we check if the GPU has made any progress
since the last timeout. If so, instead of resetting the hardware, we skip
the reset and let the timer get rearmed. This gives long-running jobs a
chance to complete.
However, when `timedout_job()` is called, the job in question is removed
from the pending list, which means it won't be automatically freed through
`free_job()`. Consequently, when we skip the reset and keep the job
running, the job won't be freed when it finally completes.
This situation leads to a memory leak, as exposed in [1] and [2].
Similarly to commit 704d3d60fec4 ("drm/etnaviv: don't block scheduler when
GPU is still active"), this patch ensures the job is put back on the
pending list when extending the timeout.
Cc: stable@vger.kernel.org # 6.0
Reported-by: Daivik Bhatia <dtgs1208@gmail.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12227 [1]
Closes: https://github.com/raspberrypi/linux/issues/6817 [2]
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250430210643.57924-1-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:
root@rb1:~# gpiomon -c gpiochip1 10
irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
Unable to handle kernel paging request at virtual address ffff8000a1dc3820
Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
pc : mpm_set_type+0x80/0xcc
lr : mpm_set_type+0x5c/0xcc
Call trace:
mpm_set_type+0x80/0xcc (P)
qcom_mpm_set_type+0x64/0x158
irq_chip_set_type_parent+0x20/0x38
msm_gpio_irq_set_type+0x50/0x530
__irq_set_trigger+0x60/0x184
__setup_irq+0x304/0x6bc
request_threaded_irq+0xc8/0x19c
edge_detector_setup+0x260/0x364
linereq_create+0x420/0x5a8
gpio_ioctl+0x2d4/0x6c0
Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs.
Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250502-irq-qcom-mpm-fix-no-wake-v1-1-8a1eafcd28d4@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two minor updates, both in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove redundant query_complete trace
scsi: myrb: Fix spelling mistake "statux" -> "status"
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fix queue unquiesce check on PCI slot_reset (Keith Busch)
- fix premature queue removal and I/O failover in nvme-tcp (Michael
Liang)
- don't restore null sk_state_change (Alistair Francis)
- select CONFIG_TLS where needed (Alistair Francis)
- always free derived key data (Hannes Reinecke)
- more quirks (Wentao Guan)
- ublk zero copy fix
- ublk selftest fix for UBLK_F_NEED_GET_DATA
* tag 'block-6.15-20250502' of git://git.kernel.dk/linux:
nvmet-auth: always free derived key data
nvmet-tcp: don't restore null sk_state_change
nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
nvme-tcp: fix premature queue removal and I/O failover
nvme-pci: add quirks for WDC Blue SN550 15b7:5009
nvme-pci: add quirks for device 126f:1001
nvme-pci: fix queue unquiesce check on slot_reset
ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req
ublk: enhance check for register/unregister io buffer command
ublk: decouple zero copy from user copy
selftests: ublk: fix UBLK_F_NEED_GET_DATA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix potential NULL dereference in the i.MX driver
- Fix the pull up/down resistor values in the Meson driver
- Fix the mapping of the PHY LED pins in the Airhoa driver
- Fix EINT interrupts on older controllers and a debounce value issue
in the Mediatek driver
- Fix an erronoeus PINGROUP define in the Qualcomm driver
* tag 'pinctrl-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Fix PINGROUP definition for sm8750
pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init()
pinctrl: mediatek: Fix new design debounce issue
pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers
pinctrl: airoha: fix wrong PHY LED mapping and PHY2 LED defines
pinctrl: meson: define the pull up/down resistor value as 60 kOhm
pinctrl: imx: Return NULL if no group is matched and found
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"ARM-SMMU fixes:
- Fix broken detection of the S2FWB feature
- Ensure page-size bitmap is initialised for SVA domains
- Fix handling of SMMU client devices with duplicate Stream IDs
- Don't fail SMMU probe if Stream IDs are aliased across clients
Intel VT-d fixes:
- Add quirk for IGFX device
- Revert an ATS change to fix a boot failure
AMD IOMMU:
- Fix potential buffer overflow
Core:
- Fix for iommu_copy_struct_from_user()"
* tag 'iommu-fixes-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)
iommu/vt-d: Revert ATS timing change to fix boot failure
iommu: Fix two issues in iommu_copy_struct_from_user()
iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid
iommu/arm-smmu-v3: Fail aliasing StreamIDs more gracefully
iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids
iommu/arm-smmu-v3: Fix pgsize_bit for sva domains
iommu/arm-smmu-v3: Add missing S2FWB feature detection
|
|
When calling scnprintf() to append recovery method to event_string,
the second argument should be `sizeof(event_string) - len`, otherwise
there is a potential overflow problem.
Fixes: b7cf9f4ac1b8 ("drm: Introduce device wedged event")
Signed-off-by: Feng Jiang <jiangfeng@kylinos.cn>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250409014633.31303-1-jiangfeng@kylinos.cn
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The ring buffer size varies across VMBus channels. The size of sysfs
node for the ring buffer is currently hardcoded to 4 MB. Userspace
clients either use fstat() or hardcode this size for doing mmap().
To address this, make the sysfs node size dynamic to reflect the
actual ring buffer size for each channel. This will ensure that
fstat() on ring sysfs node always returns the correct size of
ring buffer.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250502074811.2022-3-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On regular bootup, devices get registered to VMBus first, so when
uio_hv_generic driver for a particular device type is probed,
the device is already initialized and added, so sysfs creation in
hv_uio_probe() works fine. However, when the device is removed
and brought back, the channel gets rescinded and the device again gets
registered to VMBus. However this time, the uio_hv_generic driver is
already registered to probe for that device and in this case sysfs
creation is tried before the device's kobject gets initialized
completely.
Fix this by moving the core logic of sysfs creation of ring buffer,
from uio_hv_generic to HyperV's VMBus driver, where the rest of the
sysfs attributes for the channels are defined. While doing that, make
use of attribute groups and macros, instead of creating sysfs
directly, to ensure better error handling and code flow.
Problematic path:
vmbus_process_offer (A new offer comes for the VMBus device)
vmbus_add_channel_work
vmbus_device_register
|-> device_register
| |...
| |-> hv_uio_probe
| |...
| |-> sysfs_create_bin_file (leads to a warning as
| the primary channel's kobject, which is used to
| create the sysfs file, is not yet initialized)
|-> kset_create_and_add
|-> vmbus_add_channel_kobj (initialization of the primary
channel's kobject happens later)
Above code flow is sequential and the warning is always reproducible in
this path.
Fixes: 9ab877a6ccf8 ("uio_hv_generic: make ring buffer attribute for primary channel")
Cc: stable@kernel.org
Suggested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250502074811.2022-2-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wait_event_interruptible_timeout returns a long
The return value was being assigned to an int causing an integer overflow
when the remaining jiffies > INT_MAX which resulted in random error
returns.
Use a long return value, converting to the int ioctl return only on error.
Fixes: bb99794a4792 ("usb: usbtmc: Add ioctl for vendor specific read")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250502070941.31819-4-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wait_event_interruptible_timeout returns a long
The return was being assigned to an int causing an integer overflow when
the remaining jiffies > INT_MAX resulting in random error returns.
Use a long return value, converting to the int ioctl return only on
error.
Fixes: 739240a9f6ac ("usb: usbtmc: Add ioctl USBTMC488_IOCTL_WAIT_SRQ")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250502070941.31819-3-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wait_event_interruptible_timeout returns a long
The return was being assigned to an int causing an integer overflow when
the remaining jiffies > INT_MAX resulting in random error returns.
Use a long return value and convert to int ioctl return only on error.
When the return value of wait_event_interruptible_timeout was <= INT_MAX
the number of remaining jiffies was returned which has no meaning for the
user. Return 0 on success.
Reported-by: Michael Katzmann <vk2bea@gmail.com>
Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250502070941.31819-2-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Eustall locking fix and disabling on VF
- Documentation fix kernel version supporting hwmon entries
- SVM fixes on error handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/fqkoqvo62fbkvw6xoxoxutzozqksxxudbmqacjm3durid2pkak@imlxghgrk3ob
|
|
The 'has_dma_mapping' flag should be set once there is a
mapping so it could be unmapped in case of error.
v2:
- Resend for CI
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250428024752.881292-1-matthew.brost@intel.com
(cherry picked from commit f64cf7b681af72d3f715c0d0fd72091a54471c1a)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.15-2025-05-01:
amdgpu:
- Fix possible UAF in HDCP
- XGMI dma-buf fix
- NBIO 7.11 fix
- VCN 5.0.1 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250501185634.4132187-1-alexander.deucher@amd.com
|
|
The original code would skip null delay pointers, but when the pointers
were converted to point within the spi_device struct, the check was not
updated to skip delays of zero. Hence all spi devices that didn't set
delays would fail to probe.
Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://patch.msgid.link/20250423-spi-tegra114-v1-1-2d608bcc12f9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
drm/i915 fixes for v6.15-rc5:
- Fix build for CONFIG_DRM_I915_PXP=n
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/87selquhpe.fsf@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Happy May Day.
Things have calmed down on our end (knock on wood), no outstanding
investigations. Including fixes from Bluetooth and WiFi.
Current release - fix to a fix:
- igc: fix lock order in igc_ptp_reset
Current release - new code bugs:
- Revert "wifi: iwlwifi: make no_160 more generic", fixes regression
to Killer line of devices reported by a number of people
- Revert "wifi: iwlwifi: add support for BE213", initial FW is too
buggy
- number of fixes for mld, the new Intel WiFi subdriver
Previous releases - regressions:
- wifi: mac80211: restore monitor for outgoing frames
- drv: vmxnet3: fix malformed packet sizing in vmxnet3_process_xdp
- eth: bnxt_en: fix timestamping FIFO getting out of sync on reset,
delivering stale timestamps
- use sock_gen_put() in the TCP fraglist GRO heuristic, don't assume
every socket is a full socket
Previous releases - always broken:
- sched: adapt qdiscs for reentrant enqueue cases, fix list
corruptions
- xsk: fix race condition in AF_XDP generic RX path, shared UMEM
can't be protected by a per-socket lock
- eth: mtk-star-emac: fix spinlock recursion issues on rx/tx poll
- btusb: avoid NULL pointer dereference in skb_dequeue()
- dsa: felix: fix broken taprio gate states after clock jump"
* tag 'net-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: vertexcom: mse102x: Fix RX error handling
net: vertexcom: mse102x: Add range check for CMD_RTS
net: vertexcom: mse102x: Fix LEN_MASK
net: vertexcom: mse102x: Fix possible stuck of SPI interrupt
net: hns3: defer calling ptp_clock_register()
net: hns3: fixed debugfs tm_qset size
net: hns3: fix an interrupt residual problem
net: hns3: store rx VLAN tag offload state for VF
octeon_ep: Fix host hang issue during device reboot
net: fec: ERR007885 Workaround for conventional TX
net: lan743x: Fix memleak issue when GSO enabled
ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations
net: use sock_gen_put() when sk_state is TCP_TIME_WAIT
bnxt_en: fix module unload sequence
bnxt_en: Fix ethtool -d byte order for 32-bit values
bnxt_en: Fix out-of-bound memcpy() during ethtool -w
bnxt_en: Fix coredump logic to free allocated buffer
bnxt_en: delay pci_alloc_irq_vectors() in the AER path
bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings()
bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan()
...
|
|
EU stall sampling is not supported on SRIOV VF. Do not
initialize or open EU stall stream on SRIOV VF.
Fixes: 9a0b11d4cf3b ("drm/xe/eustall: Add support to init, enable and disable EU stall sampling")
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/10db5d1c7e17aadca7078ff74575b7ffc0d5d6b8.1745215022.git.harish.chegondi@intel.com
(cherry picked from commit 6ed20625a4b8189a1bd6598aa58e03147ce378ee)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Use a separate lock in the polling function eu_stall_data_buf_poll()
instead of eu_stall->stream_lock. This would prevent a possible
circular locking dependency leading to a deadlock as described below.
This would also require additional locking with the new lock in
the read function.
<4> [787.192986] ======================================================
<4> [787.192988] WARNING: possible circular locking dependency detected
<4> [787.192991] 6.14.0-rc7-xe+ #1 Tainted: G U
<4> [787.192993] ------------------------------------------------------
<4> [787.192994] xe_eu_stall/20093 is trying to acquire lock:
<4> [787.192996] ffff88819847e2c0 ((work_completion)
(&(&stream->buf_poll_work)->work)), at: __flush_work+0x1f8/0x5e0
<4> [787.193005] but task is already holding lock:
<4> [787.193007] ffff88814ce83ba8 (>->eu_stall->stream_lock){3:3},
at: xe_eu_stall_stream_ioctl+0x41/0x6a0 [xe]
<4> [787.193090] which lock already depends on the new lock.
<4> [787.193093] the existing dependency chain (in reverse order) is:
<4> [787.193095]
-> #1 (>->eu_stall->stream_lock){+.+.}-{3:3}:
<4> [787.193099] __mutex_lock+0xb4/0xe40
<4> [787.193104] mutex_lock_nested+0x1b/0x30
<4> [787.193106] eu_stall_data_buf_poll_work_fn+0x44/0x1d0 [xe]
<4> [787.193155] process_one_work+0x21c/0x740
<4> [787.193159] worker_thread+0x1db/0x3c0
<4> [787.193161] kthread+0x10d/0x270
<4> [787.193164] ret_from_fork+0x44/0x70
<4> [787.193168] ret_from_fork_asm+0x1a/0x30
<4> [787.193172]
-> #0 ((work_completion)(&(&stream->buf_poll_work)->work)){+.+.}-{0:0}:
<4> [787.193176] __lock_acquire+0x1637/0x2810
<4> [787.193180] lock_acquire+0xc9/0x300
<4> [787.193183] __flush_work+0x219/0x5e0
<4> [787.193186] cancel_delayed_work_sync+0x87/0x90
<4> [787.193189] xe_eu_stall_disable_locked+0x9a/0x260 [xe]
<4> [787.193237] xe_eu_stall_stream_ioctl+0x5b/0x6a0 [xe]
<4> [787.193285] __x64_sys_ioctl+0xa4/0xe0
<4> [787.193289] x64_sys_call+0x131e/0x2650
<4> [787.193292] do_syscall_64+0x91/0x180
<4> [787.193295] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<4> [787.193299]
other info that might help us debug this:
<4> [787.193302] Possible unsafe locking scenario:
<4> [787.193304] CPU0 CPU1
<4> [787.193305] ---- ----
<4> [787.193306] lock(>->eu_stall->stream_lock);
<4> [787.193308] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193311] lock(>->eu_stall->stream_lock);
<4> [787.193313] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193315]
*** DEADLOCK ***
Fixes: 760edec939685 ("drm/xe/eustall: Add support to read() and poll() EU stall data")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4598
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/c896932fca84f79db2df5942911997ed77b2b9b6.1744934656.git.harish.chegondi@intel.com
(cherry picked from commit c2b1f1b8641372bb2e563c49eb25632623a860fc)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
To avoid a race between the IOMMU probing thread and the device driver
async probing thread during configuration of the platform DMA, update
`platform_dma_configure()` to read `dev->driver` once and test if it's
NULL before using it. This ensures that we don't de-reference an invalid
platform driver pointer if the device driver is asynchronously bound
while configuring the DMA.
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250424180420.3928523-1-willmcvicker@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 6.15 cycle.
A mixed bunch of fixes for new and ancient issues found.
multiple driver sets:
- Stop leaking wakeup sources on device unbind.
- Various timestamp alignment fixes that came up as part of work to add
runtime checks on buffer sizing. Similarly a DMA buffer safety fix.
hid-sensor-prox
- Fix a bad merge conflict resolution that lost some variable assignments.
- Fix handling of scale when multiple channels present.
- Fix wrong application of exponent in offset calculation.
adi,ad7380
- Disable offload before using the SPI bus.
- Fix a wrong shift on the event threshold.
adi,ad7606
- Check there is a sw_mode_config callback before using it as not
all busses define one.
- Fix missing hold of chip select on in multi word accesses.
adi,ad7861
- Fix wrong logic on storing of mode.
adi,adis16201
- Wrong resolution for inclinometer channel.
adi,adxl367
- Use fresh ODR when setting activity time, not previous value.
bosch,bmi270
- Fix initial sampling frequency configuration which was using the
wrong register mask.
rockchip,saradc
- Fix clock initialization sequence to get frequency after get + enable,
not before.
st,lsm6dsx
- Avoid 2 potential infinite loops if we see empty FIFOs
ti,opt3001
- Fix a deadlock that can occur due to concurrent access to a flag.
* tag 'iio-fixes-for-6.15a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (28 commits)
iio: adis16201: Correct inclinometer channel resolution
iio: adc: ad7606: fix serial register access
iio: pressure: mprls0025pa: use aligned_s64 for timestamp
iio: imu: adis16550: align buffers for timestamp
staging: iio: adc: ad7816: Correct conditional logic for store mode
iio: adc: ad7266: Fix potential timestamp alignment issue.
iio: adc: ad7768-1: Fix insufficient alignment of timestamp.
iio: adc: dln2: Use aligned_s64 for timestamp
iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64
iio: temp: maxim-thermocouple: Fix potential lack of DMA safe buffer.
iio: chemical: pms7003: use aligned_s64 for timestamp
iio: chemical: sps30: use aligned_s64 for timestamp
iio: imu: inv_mpu6050: align buffer for timestamp
iio: imu: st_lsm6dsx: Fix wakeup source leaks on device unbind
iio: adc: qcom-spmi-iadc: Fix wakeup source leaks on device unbind
iio: accel: fxls8962af: Fix wakeup source leaks on device unbind
iio: adc: ad7380: fix event threshold shift
iio: hid-sensor-prox: Fix incorrect OFFSET calculation
iio: hid-sensor-prox: support multi-channel SCALE calculation
iio: hid-sensor-prox: Restore lost scale assignments
...
|
|
This patch fixes Type-C Compliance Test TD 4.7.6 - Try.SNK DRP Connect
SNKAS.
The compliance tester moves into SNK_UNATTACHED during toggling and
expects the PUT to apply Rp after tPDDebounce of detection. If the port
is in SNK_TRY_WAIT_DEBOUNCE, it will move into SRC_TRYWAIT immediately
and apply Rp. This violates TD 4.7.5.V.3, where the tester confirms that
the PUT attaches Rp after the transitions to Unattached.SNK for
tPDDebounce.
Change the tcpm_set_state delay between SNK_TRY_WAIT_DEBOUNCE and
SRC_TRYWAIT to tPDDebounce.
Fixes: a0a3e04e6b2c ("staging: typec: tcpm: Check for Rp for tPDDebounce")
Cc: stable <stable@kernel.org>
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250429234703.3748506-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usbtmc_read() calls usbtmc_generic_read()
which uses interruptible sleep, but usbtmc_read()
itself uses uninterruptble sleep for mutual exclusion
between threads. That makes no sense.
Both should use interruptible sleep.
Fixes: 5b775f672cc99 ("USB: add USB test and measurement class driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250430134810.226015-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The controllers with rtl version larger than
RTL_REVISION_NEW_LPM (0x00002700) has bug which causes that controller
doesn't resume from L1 state. It happens if after receiving LPM packet
controller starts transitioning to L1 and in this moment the driver force
resuming by write operation to PORTSC.PLS.
It's corner case and happens when write operation to PORTSC occurs during
device delay before transitioning to L1 after transmitting ACK
time (TL1TokenRetry).
Forcing transition from L1->L0 by driver for revision larger than
RTL_REVISION_NEW_LPM is not needed, so driver can simply fix this issue
through block call of cdnsp_force_l0_go function.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB9538B55C3A6E71F9ED29E980DD842@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch ensures that the UCSI driver waits for all pending tasks in the
ucsi_displayport_work workqueue to finish executing before proceeding with
the partner removal.
Cc: stable <stable@kernel.org>
Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20250424084429.3220757-3-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch introduces the ucsi_con_mutex_lock / ucsi_con_mutex_unlock
functions to the UCSI driver. ucsi_con_mutex_lock ensures the connector
mutex is only locked if a connection is established and the partner pointer
is valid. This resolves a deadlock scenario where
ucsi_displayport_remove_partner holds con->mutex waiting for
dp_altmode_work to complete while dp_altmode_work attempts to acquire it.
Cc: stable <stable@kernel.org>
Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250424084429.3220757-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Cypress HX3 USB3.0 hubs use different PID values depending
on the product variant. The comment in compatibles table is
misleading, as the currently used PIDs (0x6504 and 0x6506 for
USB 3.0 and USB 2.0, respectively) are defaults for the CYUSB331x,
while CYUSB330x and CYUSB332x variants use different values.
Based on the datasheet [1], update the compatible usb devices table
to handle different types of the hub.
The change also includes vendor mode PIDs, which are used by the
hub in I2C Master boot mode, if connected EEPROM contains invalid
signature or is blank. This allows to correctly boot the hub even
if the EEPROM will have broken content.
Number of vcc supplies and timing requirements are the same for all
HX variants, so the platform driver's match table does not have to
be extended.
[1] https://www.infineon.com/dgdl/Infineon-HX3_USB_3_0_Hub_Consumer_Industrial-DataSheet-v22_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ecb53f644b8
Table 9. PID Values
Fixes: b43cd82a1a40 ("usb: misc: onboard-hub: add support for Cypress HX3 USB 3.0 family")
Cc: stable <stable@kernel.org>
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-1-4a76a474a010@thaumatec.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Device tree bindings state that the clock is optional for UHCI platform
controllers, and some existing device trees don't provide those - such
as those for VIA/WonderMedia devices.
The driver however fails to probe now if no clock is provided, because
devm_clk_get returns an error pointer in such case.
Switch to devm_clk_get_optional instead, so that it could probe again
on those platforms where no clocks are given.
Cc: stable <stable@kernel.org>
Fixes: 26c502701c52 ("usb: uhci: Add clk support to uhci-platform")
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250425-uhci-clock-optional-v1-1-a1d462592f29@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently gadget_wakeup() waits for U0 synchronously if it was
called from func_wakeup(), this is because we need to send the
function wakeup command soon after the link is active. And the
call is made synchronous by polling DSTS continuosly for 20000
times in __dwc3_gadget_wakeup(). But it observed that sometimes
the link is not active even after polling 20K times, leading to
remote wakeup failures. Adding a small delay between each poll
helps, but that won't guarantee resolution in future. Hence make
the gadget_wakeup completely asynchronous.
Since multiple interfaces can issue a function wakeup at once,
add a new variable wakeup_pending_funcs which will indicate the
functions that has issued func_wakup, this is represented in a
bitmap format. If the link is in U3, dwc3_gadget_func_wakeup()
will set the bit corresponding to interface_id and bail out.
Once link comes back to U0, linksts_change irq is triggered,
where the function wakeup command is sent based on bitmap.
Cc: stable <stable@kernel.org>
Fixes: 92c08a84b53e ("usb: dwc3: Add function suspend and function wakeup support")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250422103231.1954387-4-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently when the host sends GET_STATUS request for an interface,
we use get_status callbacks to set/clear remote wakeup capability
of that interface. And if get_status callback isn't present for
that interface, then we assume its remote wakeup capability based
on bmAttributes.
Now consider a scenario, where we have a USB configuration with
multiple interfaces (say ECM + ADB), here ECM is remote wakeup
capable and as of now ADB isn't. And bmAttributes will indicate
the device as wakeup capable. With the current implementation,
when host sends GET_STATUS request for both interfaces, we will
set FUNC_RW_CAP for both. This results in USB3 CV Chapter 9.15
(Function Remote Wakeup Test) failures as host expects remote
wakeup from both interfaces.
The above scenario is just an example, and the failure can be
observed if we use configuration with any interface except ECM.
Hence avoid configuring remote wakeup capability from composite
driver based on bmAttributes, instead use get_status callbacks
and let the function drivers decide this.
Cc: stable <stable@kernel.org>
Fixes: 481c225c4802 ("usb: gadget: Handle function suspend feature selector")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250422103231.1954387-3-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When host sends GET_STATUS to ECM interface, handle the request
from the function driver. Since the interface is wakeup capable,
set the corresponding bit, and set RW bit if the function is
already armed for wakeup by the host.
Cc: stable <stable@kernel.org>
Fixes: 481c225c4802 ("usb: gadget: Handle function suspend feature selector")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250422103231.1954387-2-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a USB device is connected to the OTG port, the tegra_xhci_id_work()
routine transitions the PHY to host mode and calls xhci_hub_control()
with the SetPortFeature command to enable port power.
In certain cases, the XHCI controller may be in a low-power state
when this operation occurs. If xhci_hub_control() is invoked while
the controller is suspended, the PORTSC register may return 0xFFFFFFFF,
indicating a read failure. This causes xhci_hc_died() to be triggered,
leading to host controller shutdown.
Example backtrace:
[ 105.445736] Workqueue: events tegra_xhci_id_work
[ 105.445747] dump_backtrace+0x0/0x1e8
[ 105.445759] xhci_hc_died.part.48+0x40/0x270
[ 105.445769] tegra_xhci_set_port_power+0xc0/0x240
[ 105.445774] tegra_xhci_id_work+0x130/0x240
To prevent this, ensure the controller is fully resumed before
interacting with hardware registers by calling pm_runtime_get_sync()
prior to the host mode transition and xhci_hub_control().
Fixes: f836e7843036 ("usb: xhci-tegra: Add OTG support")
Cc: stable <stable@kernel.org>
Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://lore.kernel.org/r/20250422114001.126367-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
