| Age | Commit message (Collapse) | Author |
|---|
|
In very rare cases after resuming controller from L1 to L0 it reads
registers before the clock UTMI have been enabled and as the result
driver reads incorrect value.
Most of registers are in APB domain clock but some of them (e.g. PORTSC)
are in UTMI domain clock.
After entering to L1 state the UTMI clock can be disabled.
When controller transition from L1 to L0 the port status change event is
reported and in interrupt runtime function driver reads PORTSC.
During this read operation controller synchronize UTMI and APB domain
but UTMI clock is still disabled and in result it reads 0xFFFFFFFF value.
To fix this issue driver increases APB timeout value.
The issue is platform specific and if the default value of APB timeout
is not sufficient then this time should be set Individually for each
platform.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB953846C57973E4DB134CAA71DDBF2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We identified a bug where the ST_RC bit in the status register was not
being acknowledged after clearing the CTRL_RUN bit in the control
register. This could lead to unexpected behavior in the USB gadget
drivers.
This patch resolves the issue by adding the necessary code to explicitly
acknowledge ST_RC after clearing CTRL_RUN based on the programming
sequence, ensuring proper state transition.
Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Cc: stable <stable@kernel.org>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://lore.kernel.org/r/20250418081228.1194779-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For vcn5.0.1 only, enable DPG PAUSE to avoid DPG resets.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e5f86c14c3440171f2a3e7a68ceb739297726e9)
|
|
APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8116a32cdbe456c7f511183eb9ab187e3d590fb)
Cc: stable@vger.kernel.org
|
|
If peer memory is XGMI-accessible, we should never access it through PCIe
P2P DMA mappings. PCIe P2P is slower, has different coherence behaviour,
limited or no support for atomics, or may not work at all. Fail with a
warning if DMABUF mappings of such memory are attempted.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbe4c63689bc6b5fd3ab72650ea4b6a667e96a68)
|
|
The HDCP code in amdgpu_dm_hdcp.c copies pointers to amdgpu_dm_connector
objects without incrementing the kref reference counts. When using a
USB-C dock, and the dock is unplugged, the corresponding
amdgpu_dm_connector objects are freed, creating dangling pointers in the
HDCP code. When the dock is plugged back, the dangling pointers are
dereferenced, resulting in a slab-use-after-free:
[ 66.775837] BUG: KASAN: slab-use-after-free in event_property_validate+0x42f/0x6c0 [amdgpu]
[ 66.776171] Read of size 4 at addr ffff888127804120 by task kworker/0:1/10
[ 66.776179] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.14.0-rc7-00180-g54505f727a38-dirty #233
[ 66.776183] Hardware name: HP HP Pavilion Aero Laptop 13-be0xxx/8916, BIOS F.17 12/18/2024
[ 66.776186] Workqueue: events event_property_validate [amdgpu]
[ 66.776494] Call Trace:
[ 66.776496] <TASK>
[ 66.776497] dump_stack_lvl+0x70/0xa0
[ 66.776504] print_report+0x175/0x555
[ 66.776507] ? __virt_addr_valid+0x243/0x450
[ 66.776510] ? kasan_complete_mode_report_info+0x66/0x1c0
[ 66.776515] kasan_report+0xeb/0x1c0
[ 66.776518] ? event_property_validate+0x42f/0x6c0 [amdgpu]
[ 66.776819] ? event_property_validate+0x42f/0x6c0 [amdgpu]
[ 66.777121] __asan_report_load4_noabort+0x14/0x20
[ 66.777124] event_property_validate+0x42f/0x6c0 [amdgpu]
[ 66.777342] ? __lock_acquire+0x6b40/0x6b40
[ 66.777347] ? enable_assr+0x250/0x250 [amdgpu]
[ 66.777571] process_one_work+0x86b/0x1510
[ 66.777575] ? pwq_dec_nr_in_flight+0xcf0/0xcf0
[ 66.777578] ? assign_work+0x16b/0x280
[ 66.777580] ? lock_is_held_type+0xa3/0x130
[ 66.777583] worker_thread+0x5c0/0xfa0
[ 66.777587] ? process_one_work+0x1510/0x1510
[ 66.777588] kthread+0x3a2/0x840
[ 66.777591] ? kthread_is_per_cpu+0xd0/0xd0
[ 66.777594] ? trace_hardirqs_on+0x4f/0x60
[ 66.777597] ? _raw_spin_unlock_irq+0x27/0x60
[ 66.777599] ? calculate_sigpending+0x77/0xa0
[ 66.777602] ? kthread_is_per_cpu+0xd0/0xd0
[ 66.777605] ret_from_fork+0x40/0x90
[ 66.777607] ? kthread_is_per_cpu+0xd0/0xd0
[ 66.777609] ret_from_fork_asm+0x11/0x20
[ 66.777614] </TASK>
[ 66.777643] Allocated by task 10:
[ 66.777646] kasan_save_stack+0x39/0x60
[ 66.777649] kasan_save_track+0x14/0x40
[ 66.777652] kasan_save_alloc_info+0x37/0x50
[ 66.777655] __kasan_kmalloc+0xbb/0xc0
[ 66.777658] __kmalloc_cache_noprof+0x1c8/0x4b0
[ 66.777661] dm_dp_add_mst_connector+0xdd/0x5c0 [amdgpu]
[ 66.777880] drm_dp_mst_port_add_connector+0x47e/0x770 [drm_display_helper]
[ 66.777892] drm_dp_send_link_address+0x1554/0x2bf0 [drm_display_helper]
[ 66.777901] drm_dp_check_and_send_link_address+0x187/0x1f0 [drm_display_helper]
[ 66.777909] drm_dp_mst_link_probe_work+0x2b8/0x410 [drm_display_helper]
[ 66.777917] process_one_work+0x86b/0x1510
[ 66.777919] worker_thread+0x5c0/0xfa0
[ 66.777922] kthread+0x3a2/0x840
[ 66.777925] ret_from_fork+0x40/0x90
[ 66.777927] ret_from_fork_asm+0x11/0x20
[ 66.777932] Freed by task 1713:
[ 66.777935] kasan_save_stack+0x39/0x60
[ 66.777938] kasan_save_track+0x14/0x40
[ 66.777940] kasan_save_free_info+0x3b/0x60
[ 66.777944] __kasan_slab_free+0x52/0x70
[ 66.777946] kfree+0x13f/0x4b0
[ 66.777949] dm_dp_mst_connector_destroy+0xfa/0x150 [amdgpu]
[ 66.778179] drm_connector_free+0x7d/0xb0
[ 66.778184] drm_mode_object_put.part.0+0xee/0x160
[ 66.778188] drm_mode_object_put+0x37/0x50
[ 66.778191] drm_atomic_state_default_clear+0x220/0xd60
[ 66.778194] __drm_atomic_state_free+0x16e/0x2a0
[ 66.778197] drm_mode_atomic_ioctl+0x15ed/0x2ba0
[ 66.778200] drm_ioctl_kernel+0x17a/0x310
[ 66.778203] drm_ioctl+0x584/0xd10
[ 66.778206] amdgpu_drm_ioctl+0xd2/0x1c0 [amdgpu]
[ 66.778375] __x64_sys_ioctl+0x139/0x1a0
[ 66.778378] x64_sys_call+0xee7/0xfb0
[ 66.778381] do_syscall_64+0x87/0x140
[ 66.778385] entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fix this by properly incrementing and decrementing the reference counts
when making and deleting copies of the amdgpu_dm_connector pointers.
(Mario: rebase on current code and update fixes tag)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Fixes: da3fd7ac0bcf3 ("drm/amd/display: Update CP property based on HW query")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://lore.kernel.org/r/20250417215005.37964-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d4673f3c3b3dcb74e36e53cdfc880baa7a87b330)
Cc: stable@vger.kernel.org
|
|
In case the CMD_RTS got corrupted by interferences, the MSE102x
doesn't allow a retransmission of the command. Instead the Ethernet
frame must be shifted out of the SPI FIFO. Since the actual length is
unknown, assume the maximum possible value.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-5-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since there is no protection in the SPI protocol against electrical
interferences, the driver shouldn't blindly trust the length payload
of CMD_RTS. So introduce a bounds check for incoming frames.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The LEN_MASK for CMD_RTS doesn't cover the whole parameter mask.
The Bit 11 is reserved, so adjust LEN_MASK accordingly.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MSE102x doesn't provide any SPI commands for interrupt handling.
So in case the interrupt fired before the driver requests the IRQ,
the interrupt will never fire again. In order to fix this always poll
for pending packets after opening the interface.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the ptp_clock_register() is called before relative
ptp resource ready. It may cause unexpected result when upper
layer called the ptp API during the timewindow. Fix it by
moving the ptp_clock_register() to the function end.
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250430093052.2400464-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The size of the tm_qset file of debugfs is limited to 64 KB,
which is too small in the scenario with 1280 qsets.
The size needs to be expanded to 1 MB.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250430093052.2400464-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a VF is passthrough to a VM, and the VM is killed, the reported
interrupt may not been handled, it will remain, and won't be clear by
the nic engine even with a flr or tqp reset. When the VM restart, the
interrupt of the first vector may be dropped by the second enable_irq
in vfio, see the issue below:
https://gitlab.com/qemu-project/qemu/-/issues/2884#note_2423361621
We notice that the vfio has always behaved this way, and the interrupt
is a residue of the nic engine, so we fix the problem by moving the
vector enable process out of the enable_irq loop.
Fixes: 08a100689d4b ("net: hns3: re-organize vector handle")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250430093052.2400464-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VF driver missed to store the rx VLAN tag strip state when
user change the rx VLAN tag offload state. And it will default
to enable the rx vlan tag strip when re-init VF device after
reset. So if user disable rx VLAN tag offload, and trig reset,
then the HW will still strip the VLAN tag from packet nad fill
into RX BD, but the VF driver will ignore it for rx VLAN tag
offload disabled. It may cause the rx VLAN tag dropped.
Fixes: b2641e2ad456 ("net: hns3: Add support of hardware rx-vlan-offload to HNS3 VF driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250430093052.2400464-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-04-29 (idpf, igc)
For idpf:
Michal fixes error path handling to remove memory leak.
Larysa prevents reset from being called during shutdown.
For igc:
Jake adjusts locking order to resolve sleeping in atomic context.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: fix lock order in igc_ptp_reset
idpf: protect shutdown from reset
idpf: fix potential memory leak on kcalloc() failure
====================
Link: https://patch.msgid.link/20250429221034.3909139-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the host loses heartbeat messages from the device,
the driver calls the device-specific ndo_stop function,
which frees the resources. If the driver is unloaded in
this scenario, it calls ndo_stop again, attempting to free
resources that have already been freed, leading to a host
hang issue. To resolve this, dev_close should be called
instead of the device-specific stop function.dev_close
internally calls ndo_stop to stop the network interface
and performs additional cleanup tasks. During the driver
unload process, if the device is already down, ndo_stop
is not called.
Fixes: 5cb96c29aa0e ("octeon_ep: add heartbeat monitor")
Signed-off-by: Sathesh B Edara <sedara@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250429114624.19104-1-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Activate TX hang workaround also in
fec_enet_txq_submit_skb() when TSO is not enabled.
Errata: ERR007885
Symptoms: NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out
commit 37d6017b84f7 ("net: fec: Workaround for imx6sx enet tx hang when enable three queues")
There is a TDAR race condition for mutliQ when the software sets TDAR
and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
This will cause the udma_tx and udma_tx_arbiter state machines to hang.
So, the Workaround is checking TDAR status four time, if TDAR cleared by
hardware and then write TDAR, otherwise don't set TDAR.
Fixes: 53bb20d1faba ("net: fec: add variable reg_desc_active to speed things up")
Signed-off-by: Mattias Barthel <mattias.barthel@atlascopco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250429090826.3101258-1-mattiasbarthel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Always map the `skb` to the LS descriptor. Previously skb was
mapped to EXT descriptor when the number of fragments is zero with
GSO enabled. Mapping the skb to EXT descriptor prevents it from
being freed, leading to a memory leak
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250429052527.10031-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On Adva boards, SMA sysfs store/get operations can call
__handle_signal_outputs() or __handle_signal_inputs() while the `irig`
and `dcf` pointers are uninitialized, leading to a NULL pointer
dereference in __handle_signal() and causing a kernel crash. Adva boards
don't use `irig` or `dcf` functionality, so add Adva-specific callbacks
`ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that
avoid invoking `irig` or `dcf` input/output routines.
Fixes: ef61f5528fca ("ptp: ocp: add Adva timecard support")
Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250429073320.33277-1-maimon.sagi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent updates to the PTP part of bnxt changed the way PTP FIFO is
cleared, skbs waiting for TX timestamps are now cleared during
ndo_close() call. To do clearing procedure, the ptp structure must
exist and point to a valid address. Module destroy sequence had ptp
clear code running before netdev close causing invalid memory access and
kernel crash. Change the sequence to destroy ptp structure after device
close.
Fixes: 8f7ae5a85137 ("bnxt_en: improve TX timestamping FIFO configuration")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Closes: https://lore.kernel.org/netdev/CAMArcTWDe2cd41=ub=zzvYifaYcYv-N-csxfqxUvejy_L0D6UQ@mail.gmail.com/
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250430170343.759126-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Olivier Moysan <olivier.moysan@foss.st.com>:
This patchset adds some checks on kernel minimum rate requirements.
This avoids potential clock rate misconfiguration, when setting the
kernel frequency on STM32MP2 SoCs.
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A spurious WARN fix for nouveau, an init and interrupt handling fixes
for ivpu, a warning fix for ttm, a hotplug fix for fdinfo, vblank fixes
for adp, a memory leak fix for the shmem kunit tests, and a timing fix
for mipi-dbi.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250430-dark-eggplant-trout-c4ea6c@houat
|
|
We need to call dm_put_live_table() even if dm_get_live_table() returns
NULL.
Fixes: 9355a9eb21a5 ("dm: support key eviction from keyslot managers of underlying devices")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fixes from Petr Pavlu:
"A single series to properly handle the module_kobject creation.
This fixes a problem with missing /sys/module/<module>/drivers for
built-in modules"
* tag 'modules-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
drivers: base: handle module_kobject creation
kernel: globalize lookup_or_create_module_kobject()
kernel: refactor lookup_or_create_module_kobject()
kernel: param: rename locate_module_kobject
|
|
When turbo mode is unavailable on a Skylake-X system, executing the
command:
# echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
results in an unchecked MSR access error:
WRMSR to 0x199 (attempted to write 0x0000000100001300).
This issue was reproduced on an OEM (Original Equipment Manufacturer)
system and is not a common problem across all Skylake-X systems.
This error occurs because the MSR 0x199 Turbo Engage Bit (bit 32) is set
when turbo mode is disabled. The issue arises when intel_pstate fails to
detect that turbo mode is disabled. Here intel_pstate relies on
MSR_IA32_MISC_ENABLE bit 38 to determine the status of turbo mode.
However, on this system, bit 38 is not set even when turbo mode is
disabled.
According to the Intel Software Developer's Manual (SDM), the BIOS sets
this bit during platform initialization to enable or disable
opportunistic processor performance operations. Logically, this bit
should be set in such cases. However, the SDM also specifies that "OS
and applications must use CPUID leaf 06H to detect processors with
opportunistic processor performance operations enabled."
Therefore, in addition to checking MSR_IA32_MISC_ENABLE bit 38, verify
that CPUID.06H:EAX[1] is 0 to accurately determine if turbo mode is
disabled.
Fixes: 4521e1a0ce17 ("cpufreq: intel_pstate: Reflect current no_turbo state correctly")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Before commit bca84a7b93fd ("PM: sleep: Use DPM_FLAG_SMART_SUSPEND
conditionally") the runtime PM status of the device in intel_resume()
had always been RPM_ACTIVE because setting DPM_FLAG_SMART_SUSPEND had
caused the core to call pm_runtime_set_active() for that device during
the "noirq" resume phase. For this reason, the pm_runtime_suspended()
check in intel_resume() had never triggered and the code depending on
it had never run. That had not caused any observable functional issues
to appear, so effectively the code in question had never been needed.
After commit bca84a7b93fd the core does not call pm_runtime_set_active()
for all devices with DPM_FLAG_SMART_SUSPEND set any more and the code
depending on the pm_runtime_suspended() check in intel_resume() runs if
the device is runtime-suspended prior to a system-wide suspend
transition. Unfortunately, when it runs, it breaks things due to the
attempt to runtime-resume bus->dev which most likely is not ready for a
runtime resume at that point.
It also does other more-or-less questionable things. Namely, it
calls pm_runtime_idle() for a device with a nonzero runtime PM usage
counter which has no effect (all devices have nonzero runtime PM
usage counters during system-wide suspend and resume). It also calls
pm_runtime_mark_last_busy() for the device even though devices cannot
runtime-suspend during system-wide suspend and resume (because their
runtime PM usage counters are nonzero) and an analogous call is made
in the same function later. Moreover, it sets the runtime PM status
of the device to RPM_ACTIVE before activating it.
For the reasons listed above, remove that code altogether.
On top of that, add a pm_runtime_disable() call to intel_suspend() to
prevent the device from being runtime-resumed at any point after
intel_suspend() has started to manipulate it because the changes
made by that function would be undone by a runtime-suspend of the
device.
Next, once runtime PM has been disabled, the runtime PM status of the
device cannot change, so pm_runtime_status_suspended() can be used
instead of pm_runtime_suspended() in intel_suspend().
Finally, make intel_resume() call pm_runtime_set_active() at the end to
set the runtime PM status of the device to "active" because it has just
been activated and re-enable runtime PM for it after that.
Additionally, drop the setting of DPM_FLAG_SMART_SUSPEND from the
driver because it has no effect on devices handled by it.
Fixes: bca84a7b93fd ("PM: sleep: Use DPM_FLAG_SMART_SUSPEND conditionally")
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/12680420.O9o76ZdvQC@rjwysocki.net
|
|
After calling nvme_auth_derive_tls_psk() we need to free the resulting
psk data, as either TLS is disable (and we don't need the data anyway)
or the psk data is copied into the resulting key (and can be free, too).
Fixes: fa2e0f8bbc68 ("nvmet-tcp: support secure channel concatenation")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Suggested-by: Maurizio Lombardi <mlombard@bsdbackstore.eu>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
queue->state_change is set as part of nvmet_tcp_set_queue_sock(), but if
the TCP connection isn't established when nvmet_tcp_set_queue_sock() is
called then queue->state_change isn't set and sock->sk->sk_state_change
isn't replaced.
As such we don't need to restore sock->sk->sk_state_change if
queue->state_change is NULL.
This avoids NULL pointer dereferences such as this:
[ 286.462026][ C0] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 286.462814][ C0] #PF: supervisor instruction fetch in kernel mode
[ 286.463796][ C0] #PF: error_code(0x0010) - not-present page
[ 286.464392][ C0] PGD 8000000140620067 P4D 8000000140620067 PUD 114201067 PMD 0
[ 286.465086][ C0] Oops: Oops: 0010 [#1] SMP KASAN PTI
[ 286.465559][ C0] CPU: 0 UID: 0 PID: 1628 Comm: nvme Not tainted 6.15.0-rc2+ #11 PREEMPT(voluntary)
[ 286.466393][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[ 286.467147][ C0] RIP: 0010:0x0
[ 286.467420][ C0] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 286.467977][ C0] RSP: 0018:ffff8883ae008580 EFLAGS: 00010246
[ 286.468425][ C0] RAX: 0000000000000000 RBX: ffff88813fd34100 RCX: ffffffffa386cc43
[ 286.469019][ C0] RDX: 1ffff11027fa68b6 RSI: 0000000000000008 RDI: ffff88813fd34100
[ 286.469545][ C0] RBP: ffff88813fd34160 R08: 0000000000000000 R09: ffffed1027fa682c
[ 286.470072][ C0] R10: ffff88813fd34167 R11: 0000000000000000 R12: ffff88813fd344c3
[ 286.470585][ C0] R13: ffff88813fd34112 R14: ffff88813fd34aec R15: ffff888132cdd268
[ 286.471070][ C0] FS: 00007fe3c04c7d80(0000) GS:ffff88840743f000(0000) knlGS:0000000000000000
[ 286.471644][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 286.472543][ C0] CR2: ffffffffffffffd6 CR3: 000000012daca000 CR4: 00000000000006f0
[ 286.473500][ C0] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 286.474467][ C0] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
[ 286.475453][ C0] Call Trace:
[ 286.476102][ C0] <IRQ>
[ 286.476719][ C0] tcp_fin+0x2bb/0x440
[ 286.477429][ C0] tcp_data_queue+0x190f/0x4e60
[ 286.478174][ C0] ? __build_skb_around+0x234/0x330
[ 286.478940][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.479659][ C0] ? __pfx_tcp_data_queue+0x10/0x10
[ 286.480431][ C0] ? tcp_try_undo_loss+0x640/0x6c0
[ 286.481196][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
[ 286.482046][ C0] ? kvm_clock_get_cycles+0x14/0x30
[ 286.482769][ C0] ? ktime_get+0x66/0x150
[ 286.483433][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.484146][ C0] tcp_rcv_established+0x6e4/0x2050
[ 286.484857][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.485523][ C0] ? ipv4_dst_check+0x160/0x2b0
[ 286.486203][ C0] ? __pfx_tcp_rcv_established+0x10/0x10
[ 286.486917][ C0] ? lock_release+0x217/0x2c0
[ 286.487595][ C0] tcp_v4_do_rcv+0x4d6/0x9b0
[ 286.488279][ C0] tcp_v4_rcv+0x2af8/0x3e30
[ 286.488904][ C0] ? raw_local_deliver+0x51b/0xad0
[ 286.489551][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.490198][ C0] ? __pfx_tcp_v4_rcv+0x10/0x10
[ 286.490813][ C0] ? __pfx_raw_local_deliver+0x10/0x10
[ 286.491487][ C0] ? __pfx_nf_confirm+0x10/0x10 [nf_conntrack]
[ 286.492275][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.492900][ C0] ip_protocol_deliver_rcu+0x8f/0x370
[ 286.493579][ C0] ip_local_deliver_finish+0x297/0x420
[ 286.494268][ C0] ip_local_deliver+0x168/0x430
[ 286.494867][ C0] ? __pfx_ip_local_deliver+0x10/0x10
[ 286.495498][ C0] ? __pfx_ip_local_deliver_finish+0x10/0x10
[ 286.496204][ C0] ? ip_rcv_finish_core+0x19a/0x1f20
[ 286.496806][ C0] ? lock_release+0x217/0x2c0
[ 286.497414][ C0] ip_rcv+0x455/0x6e0
[ 286.497945][ C0] ? __pfx_ip_rcv+0x10/0x10
[ 286.498550][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.499137][ C0] ? __pfx_ip_rcv_finish+0x10/0x10
[ 286.499763][ C0] ? lock_release+0x217/0x2c0
[ 286.500327][ C0] ? dl_scaled_delta_exec+0xd1/0x2c0
[ 286.500922][ C0] ? __pfx_ip_rcv+0x10/0x10
[ 286.501480][ C0] __netif_receive_skb_one_core+0x166/0x1b0
[ 286.502173][ C0] ? __pfx___netif_receive_skb_one_core+0x10/0x10
[ 286.502903][ C0] ? lock_acquire+0x2b2/0x310
[ 286.503487][ C0] ? process_backlog+0x372/0x1350
[ 286.504087][ C0] ? lock_release+0x217/0x2c0
[ 286.504642][ C0] process_backlog+0x3b9/0x1350
[ 286.505214][ C0] ? process_backlog+0x372/0x1350
[ 286.505779][ C0] __napi_poll.constprop.0+0xa6/0x490
[ 286.506363][ C0] net_rx_action+0x92e/0xe10
[ 286.506889][ C0] ? __pfx_net_rx_action+0x10/0x10
[ 286.507437][ C0] ? timerqueue_add+0x1f0/0x320
[ 286.507977][ C0] ? sched_clock_cpu+0x68/0x540
[ 286.508492][ C0] ? lock_acquire+0x2b2/0x310
[ 286.509043][ C0] ? kvm_sched_clock_read+0xd/0x20
[ 286.509607][ C0] ? handle_softirqs+0x1aa/0x7d0
[ 286.510187][ C0] handle_softirqs+0x1f2/0x7d0
[ 286.510754][ C0] ? __pfx_handle_softirqs+0x10/0x10
[ 286.511348][ C0] ? irqtime_account_irq+0x181/0x290
[ 286.511937][ C0] ? __dev_queue_xmit+0x85d/0x3450
[ 286.512510][ C0] do_softirq.part.0+0x89/0xc0
[ 286.513100][ C0] </IRQ>
[ 286.513548][ C0] <TASK>
[ 286.513953][ C0] __local_bh_enable_ip+0x112/0x140
[ 286.514522][ C0] ? __dev_queue_xmit+0x85d/0x3450
[ 286.515072][ C0] __dev_queue_xmit+0x872/0x3450
[ 286.515619][ C0] ? nft_do_chain+0xe16/0x15b0 [nf_tables]
[ 286.516252][ C0] ? __pfx___dev_queue_xmit+0x10/0x10
[ 286.516817][ C0] ? selinux_ip_postroute+0x43c/0xc50
[ 286.517433][ C0] ? __pfx_selinux_ip_postroute+0x10/0x10
[ 286.518061][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.518606][ C0] ? ip_output+0x164/0x4a0
[ 286.519149][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.519671][ C0] ? ip_finish_output2+0x17d5/0x1fb0
[ 286.520258][ C0] ip_finish_output2+0xb4b/0x1fb0
[ 286.520787][ C0] ? __pfx_ip_finish_output2+0x10/0x10
[ 286.521355][ C0] ? __ip_finish_output+0x15d/0x750
[ 286.521890][ C0] ip_output+0x164/0x4a0
[ 286.522372][ C0] ? __pfx_ip_output+0x10/0x10
[ 286.522872][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.523402][ C0] ? _raw_spin_unlock_irqrestore+0x4c/0x60
[ 286.524031][ C0] ? __pfx_ip_finish_output+0x10/0x10
[ 286.524605][ C0] ? __ip_queue_xmit+0x999/0x2260
[ 286.525200][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.525744][ C0] ? ipv4_dst_check+0x16a/0x2b0
[ 286.526279][ C0] ? lock_release+0x217/0x2c0
[ 286.526793][ C0] __ip_queue_xmit+0x1883/0x2260
[ 286.527324][ C0] ? __skb_clone+0x54c/0x730
[ 286.527827][ C0] __tcp_transmit_skb+0x209b/0x37a0
[ 286.528374][ C0] ? __pfx___tcp_transmit_skb+0x10/0x10
[ 286.528952][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.529472][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
[ 286.530152][ C0] ? trace_hardirqs_on+0x12/0x120
[ 286.530691][ C0] tcp_write_xmit+0xb81/0x88b0
[ 286.531224][ C0] ? mod_memcg_state+0x4d/0x60
[ 286.531736][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.532253][ C0] __tcp_push_pending_frames+0x90/0x320
[ 286.532826][ C0] tcp_send_fin+0x141/0xb50
[ 286.533352][ C0] ? __pfx_tcp_send_fin+0x10/0x10
[ 286.533908][ C0] ? __local_bh_enable_ip+0xab/0x140
[ 286.534495][ C0] inet_shutdown+0x243/0x320
[ 286.535077][ C0] nvme_tcp_alloc_queue+0xb3b/0x2590 [nvme_tcp]
[ 286.535709][ C0] ? do_raw_spin_lock+0x129/0x260
[ 286.536314][ C0] ? __pfx_nvme_tcp_alloc_queue+0x10/0x10 [nvme_tcp]
[ 286.536996][ C0] ? do_raw_spin_unlock+0x54/0x1e0
[ 286.537550][ C0] ? _raw_spin_unlock+0x29/0x50
[ 286.538127][ C0] ? do_raw_spin_lock+0x129/0x260
[ 286.538664][ C0] ? __pfx_do_raw_spin_lock+0x10/0x10
[ 286.539249][ C0] ? nvme_tcp_alloc_admin_queue+0xd5/0x340 [nvme_tcp]
[ 286.539892][ C0] ? __wake_up+0x40/0x60
[ 286.540392][ C0] nvme_tcp_alloc_admin_queue+0xd5/0x340 [nvme_tcp]
[ 286.541047][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.541589][ C0] nvme_tcp_setup_ctrl+0x8b/0x7a0 [nvme_tcp]
[ 286.542254][ C0] ? _raw_spin_unlock_irqrestore+0x4c/0x60
[ 286.542887][ C0] ? __pfx_nvme_tcp_setup_ctrl+0x10/0x10 [nvme_tcp]
[ 286.543568][ C0] ? trace_hardirqs_on+0x12/0x120
[ 286.544166][ C0] ? _raw_spin_unlock_irqrestore+0x35/0x60
[ 286.544792][ C0] ? nvme_change_ctrl_state+0x196/0x2e0 [nvme_core]
[ 286.545477][ C0] nvme_tcp_create_ctrl+0x839/0xb90 [nvme_tcp]
[ 286.546126][ C0] nvmf_dev_write+0x3db/0x7e0 [nvme_fabrics]
[ 286.546775][ C0] ? rw_verify_area+0x69/0x520
[ 286.547334][ C0] vfs_write+0x218/0xe90
[ 286.547854][ C0] ? do_syscall_64+0x9f/0x190
[ 286.548408][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120
[ 286.549037][ C0] ? syscall_exit_to_user_mode+0x93/0x280
[ 286.549659][ C0] ? __pfx_vfs_write+0x10/0x10
[ 286.550259][ C0] ? do_syscall_64+0x9f/0x190
[ 286.550840][ C0] ? syscall_exit_to_user_mode+0x8e/0x280
[ 286.551516][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120
[ 286.552180][ C0] ? syscall_exit_to_user_mode+0x93/0x280
[ 286.552834][ C0] ? ksys_read+0xf5/0x1c0
[ 286.553386][ C0] ? __pfx_ksys_read+0x10/0x10
[ 286.553964][ C0] ksys_write+0xf5/0x1c0
[ 286.554499][ C0] ? __pfx_ksys_write+0x10/0x10
[ 286.555072][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120
[ 286.555698][ C0] ? syscall_exit_to_user_mode+0x93/0x280
[ 286.556319][ C0] ? do_syscall_64+0x54/0x190
[ 286.556866][ C0] do_syscall_64+0x93/0x190
[ 286.557420][ C0] ? rcu_read_unlock+0x17/0x60
[ 286.557986][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.558526][ C0] ? lock_release+0x217/0x2c0
[ 286.559087][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.559659][ C0] ? count_memcg_events.constprop.0+0x4a/0x60
[ 286.560476][ C0] ? exc_page_fault+0x7a/0x110
[ 286.561064][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.561647][ C0] ? lock_release+0x217/0x2c0
[ 286.562257][ C0] ? do_user_addr_fault+0x171/0xa00
[ 286.562839][ C0] ? do_user_addr_fault+0x4a2/0xa00
[ 286.563453][ C0] ? irqentry_exit_to_user_mode+0x84/0x270
[ 286.564112][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.564677][ C0] ? irqentry_exit_to_user_mode+0x84/0x270
[ 286.565317][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120
[ 286.565922][ C0] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 286.566542][ C0] RIP: 0033:0x7fe3c05e6504
[ 286.567102][ C0] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d c5 8b 10 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
[ 286.568931][ C0] RSP: 002b:00007fff76444f58 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[ 286.569807][ C0] RAX: ffffffffffffffda RBX: 000000003b40d930 RCX: 00007fe3c05e6504
[ 286.570621][ C0] RDX: 00000000000000cf RSI: 000000003b40d930 RDI: 0000000000000003
[ 286.571443][ C0] RBP: 0000000000000003 R08: 00000000000000cf R09: 000000003b40d930
[ 286.572246][ C0] R10: 0000000000000000 R11: 0000000000000202 R12: 000000003b40cd60
[ 286.573069][ C0] R13: 00000000000000cf R14: 00007fe3c07417f8 R15: 00007fe3c073502e
[ 286.573886][ C0] </TASK>
Closes: https://lore.kernel.org/linux-nvme/5hdonndzoqa265oq3bj6iarwtfk5dewxxjtbjvn5uqnwclpwt6@a2n6w3taxxex/
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Ensure that TLS support is enabled in the kernel when
CONFIG_NVME_TARGET_TCP_TLS is enabled. Without this the code compiles,
but does not actually work unless something else enables CONFIG_TLS.
Fixes: 675b453e0241 ("nvmet-tcp: enable TLS handshake upcall")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Ensure that TLS support is enabled in the kernel when
CONFIG_NVME_TCP_TLS is enabled. Without this the code compiles, but does
not actually work unless something else enables CONFIG_TLS.
Fixes: be8e82caa68 ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch addresses a data corruption issue observed in nvme-tcp during
testing.
In an NVMe native multipath setup, when an I/O timeout occurs, all
inflight I/Os are canceled almost immediately after the kernel socket is
shut down. These canceled I/Os are reported as host path errors,
triggering a failover that succeeds on a different path.
However, at this point, the original I/O may still be outstanding in the
host's network transmission path (e.g., the NIC’s TX queue). From the
user-space app's perspective, the buffer associated with the I/O is
considered completed since they're acked on the different path and may
be reused for new I/O requests.
Because nvme-tcp enables zero-copy by default in the transmission path,
this can lead to corrupted data being sent to the original target,
ultimately causing data corruption.
We can reproduce this data corruption by injecting delay on one path and
triggering i/o timeout.
To prevent this issue, this change ensures that all inflight
transmissions are fully completed from host's perspective before
returning from queue stop. To handle concurrent I/O timeout from multiple
namespaces under the same controller, always wait in queue stop
regardless of queue's state.
This aligns with the behavior of queue stopping in other NVMe fabric
transports.
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Randy Jennings <randyj@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For version 1 register dump that includes the PCIe stats, the existing
code incorrectly assumes that all PCIe stats are 64-bit values. Fix it
by using an array containing the starting and ending index of the 32-bit
values. The loop in bnxt_get_regs() will use the array to do proper
endian swap for the 32-bit values.
Fixes: b5d600b027eb ("bnxt_en: Add support for 'ethtool -d'")
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When retrieving the FW coredump using ethtool, it can sometimes cause
memory corruption:
BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45):
__bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
ethtool_get_dump_data+0xdc/0x1a0
__dev_ethtool+0xa1e/0x1af0
dev_ethtool+0xa8/0x170
dev_ioctl+0x1b5/0x580
sock_do_ioctl+0xab/0xf0
sock_ioctl+0x1ce/0x2e0
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x5c/0xf0
entry_SYSCALL_64_after_hwframe+0x78/0x80
...
This happens when copying the coredump segment list in
bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command.
The info->dest_buf buffer is allocated based on the number of coredump
segments returned by the FW. The segment list is then DMA'ed by
the FW and the length of the DMA is returned by FW. The driver then
copies this DMA'ed segment list to info->dest_buf.
In some cases, this DMA length may exceed the info->dest_buf length
and cause the above BUG condition. Fix it by capping the copy
length to not exceed the length of info->dest_buf. The extra
DMA data contains no useful information.
This code path is shared for the HWRM_DBG_COREDUMP_LIST and the
HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different
for these 2 FW commands. To simplify the logic, we need to move
the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE
up, so that the new check to cap the copy length will work for both
commands.
Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When handling HWRM_DBG_COREDUMP_LIST FW command in
bnxt_hwrm_dbg_dma_data(), the allocated buffer info->dest_buf is
not freed in the error path. In the normal path, info->dest_buf
is assigned to coredump->data and it will eventually be freed after
the coredump is collected.
Free info->dest_buf immediately inside bnxt_hwrm_dbg_dma_data() in
the error path.
Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length")
Reported-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is similar to the last patch to delay the
pci_alloc_irq_vectors() call in the AER path until after calling
bnxt_reserve_rings(). bnxt_reserve_rings() needs to properly map
the MSIX table first before we call pci_alloc_irq_vectors() which
may immediately write to the MSIX table in some architectures.
Move the bnxt_init_int_mode() call from bnxt_io_slot_reset() to
bnxt_io_resume() after calling bnxt_reserve_rings().
With this change, the AER path may call bnxt_open() ->
bnxt_hwrm_if_change() with bp->irq_tbl set to NULL. bp->irq_tbl is
cleared when we call bnxt_clear_int_mode() in bnxt_io_slot_reset().
So we cannot use !bp->irq_tbl to detect aborted FW reset. Add a
new BNXT_FW_RESET_STATE_ABORT to detect aborted FW reset in
bnxt_hwrm_if_change().
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On some architectures (e.g. ARM), calling pci_alloc_irq_vectors()
will immediately cause the MSIX table to be written. This will not
work if we haven't called bnxt_reserve_rings() to properly map
the MSIX table to the MSIX vectors reserved by FW.
Fix the FW error recovery path to delay the bnxt_init_int_mode() ->
pci_alloc_irq_vectors() call by removing it from bnxt_hwrm_if_change().
bnxt_request_irq() later in the code path will call it and by then the
MSIX table is properly mapped.
Fixes: 4343838ca5eb ("bnxt_en: Replace deprecated PCI MSIX APIs")
Suggested-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If bnxt_rx_vlan() fails because the VLAN protocol ID is invalid,
the SKB is freed but we're missing the call to recycle it. This
may cause the warning:
"page_pool_release_retry() stalled pool shutdown"
Add the missing skb_mark_for_recycle() in bnxt_rx_vlan().
Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When RDMA driver is loaded, running offline self test is not
supported and driver returns failure early. But it is not clearing
the input buffer and hence the application prints some junk
characters for individual test results.
Fix it by clearing the buffer before returning.
Fixes: 895621f1c816 ("bnxt_en: Don't support offline self test when RoCE driver is loaded")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails
because we call cancel_work_sync() on dim work that has not been
initialized.
WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230
The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim
work has already been cancelled. But in the bnxt_open() path,
BNXT_STATE_NAPI_DISABLED is not set and this causes the error
path to think that it needs to cancel the uninitalized dim work.
Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization.
The bit will be cleared when we enable NAPI and initialize dim work.
Fixes: 40452969a506 ("bnxt_en: Fix DIM shutdown")
Suggested-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mutex unlock for vdev->submitted_jobs_lock was incorrectly placed
before unlocking file_priv->lock. Change order of unlocks to avoid potential
race conditions.
Fixes: 5bbccadaf33e ("accel/ivpu: Abort all jobs after command queue unregister")
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250425093656.2228168-1-jacek.lawrynowicz@linux.intel.com
|
|
Fix deadlocks in ivpu_cmdq_create_ioctl() and ivpu_cmdq_destroy_ioctl()
related to runtime suspend.
Runtime suspend acquires file_priv->lock mutex by calling
ivpu_cmdq_reset_all_contexts(). The same lock is acquired in the cmdq
ioctls. If one of the cmdq ioctls is called while runtime suspend is in
progress, it can lead to a deadlock.
Call stacks from example deadlock below.
Runtime suspend thread:
[ 3443.179717] Call Trace:
[ 3443.179724] __schedule+0x4b6/0x16b0
[ 3443.179732] ? __mod_timer+0x27d/0x3a0
[ 3443.179738] schedule+0x2f/0x140
[ 3443.179741] schedule_preempt_disabled+0x19/0x30
[ 3443.179743] __mutex_lock.constprop.0+0x335/0x7d0
[ 3443.179745] ? xas_find+0x1ed/0x260
[ 3443.179747] ? xa_find+0x8e/0xf0
[ 3443.179749] __mutex_lock_slowpath+0x13/0x20
[ 3443.179751] mutex_lock+0x41/0x60
[ 3443.179757] ivpu_cmdq_reset_all_contexts+0x82/0x150 [intel_vpu a9bd091a97f28f0235f161316b29f8234f437295]
[ 3443.179786] ivpu_pm_runtime_suspend_cb+0x1f1/0x3f0 [intel_vpu a9bd091a97f28f0235f161316b29f8234f437295]
[ 3443.179850] pci_pm_runtime_suspend+0x6e/0x1f0
[ 3443.179870] ? __pfx_pci_pm_runtime_suspend+0x10/0x10
[ 3443.179886] __rpm_callback+0x48/0x130
[ 3443.179899] rpm_callback+0x64/0x70
[ 3443.179911] rpm_suspend+0x12c/0x630
[ 3443.179922] ? __schedule+0x4be/0x16b0
[ 3443.179941] pm_runtime_work+0xca/0xf0
[ 3443.179955] process_one_work+0x188/0x3d0
[ 3443.179971] worker_thread+0x2b9/0x3c0
[ 3443.179984] kthread+0xfb/0x220
[ 3443.180001] ? __pfx_worker_thread+0x10/0x10
[ 3443.180013] ? __pfx_kthread+0x10/0x10
[ 3443.180029] ret_from_fork+0x47/0x70
[ 3443.180044] ? __pfx_kthread+0x10/0x10
[ 3443.180059] ret_from_fork_asm+0x1a/0x30
User space thread:
[ 3443.180128] Call Trace:
[ 3443.180138] __schedule+0x4b6/0x16b0
[ 3443.180159] schedule+0x2f/0x140
[ 3443.180163] rpm_resume+0x1a7/0x6a0
[ 3443.180165] ? __pfx_autoremove_wake_function+0x10/0x10
[ 3443.180169] __pm_runtime_resume+0x56/0x90
[ 3443.180171] ivpu_rpm_get+0x28/0xb0 [intel_vpu a9bd091a97f28f0235f161316b29f8234f437295]
[ 3443.180181] ivpu_ipc_send_receive+0x6d/0x120 [intel_vpu a9bd091a97f28f0235f161316b29f8234f437295]
[ 3443.180193] ? free_frozen_pages+0x395/0x670
[ 3443.180199] ? __free_pages+0xa7/0xc0
[ 3443.180202] ivpu_jsm_hws_destroy_cmdq+0x76/0xf0 [intel_vpu a9bd091a97f28f0235f161316b29f8234f437295]
[ 3443.180213] ? locks_dispose_list+0x6c/0xa0
[ 3443.180219] ? kmem_cache_free+0x342/0x470
[ 3443.180222] ? vm_area_free+0x19/0x30
[ 3443.180225] ? xas_load+0x17/0xf0
[ 3443.180229] ? xa_load+0x72/0xb0
[ 3443.180230] ivpu_cmdq_unregister.isra.0+0xb1/0x100 [intel_vpu a9bd091a97f28f0235f161316b29f8234f437295]
[ 3443.180241] ivpu_cmdq_destroy_ioctl+0x8d/0x130 [intel_vpu a9bd091a97f28f0235f161316b29f8234f437295]
[ 3443.180251] ? __pfx_ivpu_cmdq_destroy_ioctl+0x10/0x10 [intel_vpu a9bd091a97f28f0235f161316b29f8234f437295]
[ 3443.180260] drm_ioctl_kernel+0xb3/0x110
[ 3443.180265] drm_ioctl+0x2ca/0x580
[ 3443.180266] ? __pfx_ivpu_cmdq_destroy_ioctl+0x10/0x10 [intel_vpu a9bd091a97f28f0235f161316b29f8234f437295]
[ 3443.180275] ? __fput+0x1ae/0x2f0
[ 3443.180279] ? kmem_cache_free+0x342/0x470
[ 3443.180282] __x64_sys_ioctl+0xa9/0xe0
[ 3443.180286] x64_sys_call+0x13b7/0x26f0
[ 3443.180289] do_syscall_64+0x62/0x180
[ 3443.180291] entry_SYSCALL_64_after_hwframe+0x71/0x79
Fixes: 465a3914b254 ("accel/ivpu: Add API for command queue create/destroy/submit")
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250425093341.2202895-1-jacek.lawrynowicz@linux.intel.com
|
|
Increase JMS message state dump command timeout to 100 ms. On some
platforms, the FW may take a bit longer than 50 ms to dump its state
to the log buffer and we don't want to miss any debug info during TDR.
Fixes: 5e162f872d7a ("accel/ivpu: Add FW state dump on TDR")
Cc: stable@vger.kernel.org # v6.13+
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250425092822.2194465-1-jacek.lawrynowicz@linux.intel.com
|
|
The precomputed value for the NAND_READ_LOCATION_2 register should be
stored in 'snandc->regs->read_location2'.
Fix the qcom_spi_set_read_loc_first() function accordingly.
Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20250428-qpic-snand-readloc2-fix-v1-1-50ce0877ff72@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Simplest setup to reproduce the issue: connect 2 ports of the
LS1028A-RDB together (eno0 with swp0) and run:
$ ip link set eno0 up && ip link set swp0 up
$ tc qdisc replace dev swp0 parent root handle 100 taprio num_tc 8 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 map 0 1 2 3 4 5 6 7 \
base-time 0 sched-entry S 20 300000 sched-entry S 10 200000 \
sched-entry S 20 300000 sched-entry S 48 200000 \
sched-entry S 20 300000 sched-entry S 83 200000 \
sched-entry S 40 300000 sched-entry S 00 200000 flags 2
$ ptp4l -i eno0 -f /etc/linuxptp/configs/gPTP.cfg -m &
$ ptp4l -i swp0 -f /etc/linuxptp/configs/gPTP.cfg -m
One will observe that the PTP state machine on swp0 starts
synchronizing, then it attempts to do a clock step, and after that, it
never fails to recover from the condition below.
ptp4l[82.427]: selected best master clock 00049f.fffe.05f627
ptp4l[82.428]: port 1 (swp0): MASTER to UNCALIBRATED on RS_SLAVE
ptp4l[83.252]: port 1 (swp0): UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED
ptp4l[83.886]: rms 4537731277 max 9075462553 freq -18518 +/- 11467 delay 818 +/- 0
ptp4l[84.170]: timed out while polling for tx timestamp
ptp4l[84.171]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[84.172]: port 1 (swp0): send peer delay request failed
ptp4l[84.173]: port 1 (swp0): clearing fault immediately
ptp4l[84.269]: port 1 (swp0): SLAVE to LISTENING on INIT_COMPLETE
ptp4l[85.303]: timed out while polling for tx timestamp
ptp4l[84.171]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[84.172]: port 1 (swp0): send peer delay request failed
ptp4l[84.173]: port 1 (swp0): clearing fault immediately
ptp4l[84.269]: port 1 (swp0): SLAVE to LISTENING on INIT_COMPLETE
ptp4l[85.303]: timed out while polling for tx timestamp
ptp4l[85.304]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[85.305]: port 1 (swp0): send peer delay response failed
ptp4l[85.306]: port 1 (swp0): clearing fault immediately
ptp4l[86.304]: timed out while polling for tx timestamp
A hint is given by the non-zero statistics for dropped packets which
were expecting hardware TX timestamps:
$ ethtool --include-statistics -T swp0
(...)
Statistics:
tx_pkts: 30
tx_lost: 11
tx_err: 0
We know that when PTP clock stepping takes place (from ocelot_ptp_settime64()
or from ocelot_ptp_adjtime()), vsc9959_tas_clock_adjust() is called.
Another interesting hint is that placing an early return in
vsc9959_tas_clock_adjust(), so as to neutralize this function, fixes the
issue and TX timestamps are no longer dropped.
The debugging function written by me and included below is intended to
read the GCL RAM, after the admin schedule became operational, through
the two status registers available for this purpose:
QSYS_GCL_STATUS_REG_1 and QSYS_GCL_STATUS_REG_2.
static void vsc9959_print_tas_gcl(struct ocelot *ocelot)
{
u32 val, list_length, interval, gate_state;
int i, err;
err = read_poll_timeout(ocelot_read, val,
!(val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING),
10, 100000, false, ocelot, QSYS_PARAM_STATUS_REG_8);
if (err) {
dev_err(ocelot->dev,
"Failed to wait for TAS config pending bit to clear: %pe\n",
ERR_PTR(err));
return;
}
val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_3);
list_length = QSYS_PARAM_STATUS_REG_3_LIST_LENGTH_X(val);
dev_info(ocelot->dev, "GCL length: %u\n", list_length);
for (i = 0; i < list_length; i++) {
ocelot_rmw(ocelot,
QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM(i),
QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM_M,
QSYS_GCL_STATUS_REG_1);
interval = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_2);
val = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_1);
gate_state = QSYS_GCL_STATUS_REG_1_GATE_STATE_X(val);
dev_info(ocelot->dev, "GCL entry %d: states 0x%x interval %u\n",
i, gate_state, interval);
}
}
Calling it from two places: after the initial QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE
performed by vsc9959_qos_port_tas_set(), and after the one done by
vsc9959_tas_clock_adjust(), I notice the following difference.
From the tc-taprio process context, where the schedule was initially
configured, the GCL looks like this:
mscc_felix 0000:00:00.5: GCL length: 8
mscc_felix 0000:00:00.5: GCL entry 0: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 1: states 0x10 interval 200000
mscc_felix 0000:00:00.5: GCL entry 2: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 3: states 0x48 interval 200000
mscc_felix 0000:00:00.5: GCL entry 4: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 5: states 0x83 interval 200000
mscc_felix 0000:00:00.5: GCL entry 6: states 0x40 interval 300000
mscc_felix 0000:00:00.5: GCL entry 7: states 0x0 interval 200000
But from the ptp4l clock stepping process context, when the
vsc9959_tas_clock_adjust() hook is called, the GCL RAM of the
operational schedule now looks like this:
mscc_felix 0000:00:00.5: GCL length: 8
mscc_felix 0000:00:00.5: GCL entry 0: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 1: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 2: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 3: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 4: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 5: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 6: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 7: states 0x0 interval 0
I do not have a formal explanation, just experimental conclusions.
It appears that after triggering QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE
for a port's TAS, the GCL entry RAM is updated anyway, despite what the
documentation claims: "Specify the time interval in
QSYS::GCL_CFG_REG_2.TIME_INTERVAL. This triggers the actual RAM
write with the gate state and the time interval for the entry number
specified". We don't touch that register (through vsc9959_tas_gcl_set())
from vsc9959_tas_clock_adjust(), yet the GCL RAM is updated anyway.
It seems to be updated with effectively stale memory, which in my
testing can hold a variety of things, including even pieces of the
previously applied schedule, for particular schedule lengths.
As such, in most circumstances it is very difficult to pinpoint this
issue, because the newly updated schedule would "behave strangely",
but ultimately might still pass traffic to some extent, due to some
gate entries still being present in the stale GCL entry RAM. It is easy
to miss.
With the particular schedule given at the beginning, the GCL RAM
"happens" to be reproducibly rewritten with all zeroes, and this is
consistent with what we see: when the time-aware shaper has gate entries
with all gates closed, traffic is dropped on TX, no wonder we can't
retrieve TX timestamps.
Rewriting the GCL entry RAM when reapplying the new base time fixes the
observed issue.
Fixes: 8670dc33f48b ("net: dsa: felix: update base time of time-aware shaper when adjusting PTP time")
Reported-by: Richie Pearn <richard.pearn@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the mtk_poll_rx() function detects the MTK_RESETTING flag, it will
jump to release_desc and refill the high word of the SDP on the 4GB RFB.
Subsequently, mtk_rx_clean will process an incorrect SDP, leading to a
panic.
Add patch from MediaTek's SDK to resolve this.
Fixes: 2d75891ebc09 ("net: ethernet: mtk_eth_soc: support 36-bit DMA addressing on MT7988")
Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/71f47ea785699c6aa3b922d66c2bdc1a43da25b1
Signed-off-by: Chad Monroe <chad@monroe.io>
Link: https://patch.msgid.link/4adc2aaeb0fb1b9cdc56bf21cf8e7fa328daa345.1745715843.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM
transactions") added a new mutex to protect concurrent PTM transactions.
This lock is acquired in igc_ptp_reset() in order to ensure the PTM
registers are properly disabled after a device reset.
The flow where the lock is acquired already holds a spinlock, so acquiring
a mutex leads to a sleep-while-locking bug, reported both by smatch,
and the kernel test robot.
The critical section in igc_ptp_reset() does correctly use the
readx_poll_timeout_atomic variants, but the standard PTM flow uses regular
sleeping variants. This makes converting the mutex to a spinlock a bit
tricky.
Instead, re-order the locking in igc_ptp_reset. Acquire the mutex first,
and then the tmreg_lock spinlock. This is safe because there is no other
ordering dependency on these locks, as this is the only place where both
locks were acquired simultaneously. Indeed, any other flow acquiring locks
in that order would be wrong regardless.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM transactions")
Link: https://lore.kernel.org/intel-wired-lan/Z_-P-Hc1yxcw0lTB@stanley.mountain/
Link: https://lore.kernel.org/intel-wired-lan/202504211511.f7738f5d-lkp@intel.com/T/#u
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Before the referenced commit, the shutdown just called idpf_remove(),
this way IDPF_REMOVE_IN_PROG was protecting us from the serv_task
rescheduling reset. Without this flag set the shutdown process is
vulnerable to HW reset or any other triggering conditions (such as
default mailbox being destroyed).
When one of conditions checked in idpf_service_task becomes true,
vc_event_task can be rescheduled during shutdown, this leads to accessing
freed memory e.g. idpf_req_rel_vector_indexes() trying to read
vport->q_vector_idxs. This in turn causes the system to become defunct
during e.g. systemctl kexec.
Considering using IDPF_REMOVE_IN_PROG would lead to more heavy shutdown
process, instead just cancel the serv_task before cancelling
adapter->serv_task before cancelling adapter->vc_event_task to ensure that
reset will not be scheduled while we are doing a shutdown.
Fixes: 4c9106f4906a ("idpf: fix adapter NULL pointer dereference on reboot")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In case of failing on rss_data->rss_key allocation the function is
freeing vport without freeing earlier allocated q_vector_idxs. Fix it.
Move from freeing in error branch to goto scheme.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Suggested-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Renesas SDHI fixes:
- Fix error-paths in probe
- Fix build-error when CONFIG_REGULATOR is unset"
* tag 'mmc-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: renesas_sdhi: disable clocks if registering regulator failed
mmc: renesas_sdhi: add regulator dependency
mmc: renesas_sdhi: Fix error handling in renesas_sdhi_probe
|
|
This bit is necessary to receive packets from the internal PHY.
Without this bit set, no activity occurs on the interface.
Normally u-boot sets this bit, but if u-boot is compiled without
net support, the interface will be up but without any activity.
If bit is set once, it will work until the IP is powered down or reset.
The vendor SDK sets this bit along with the PHY_ID bits.
Signed-off-by: Da Xue <da@libre.computer>
Fixes: 9a24e1ff4326 ("net: mdio: add amlogic gxl mdio mux support")
Link: https://patch.msgid.link/20250425192009.1439508-1-da@libre.computer
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
