| Age | Commit message (Collapse) | Author |
|---|
|
GCC 7 is not as good as GCC 8+ in telling what is a compile-time
const, and thus could be used for static storage.
Fortunately keeping strings as const arrays is enough to make old
gcc happy.
Excerpt from the report:
My GCC is: gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0.
CC [M] drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.o
drivers/net/ethernet/intel/ice/devlink/health.c:35:3: error: initializer element is not constant
ice_common_port_solutions, {ice_port_number_label}},
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/devlink/health.c:35:3: note: (near initialization for 'ice_health_status_lookup[0].solution')
drivers/net/ethernet/intel/ice/devlink/health.c:35:31: error: initializer element is not constant
ice_common_port_solutions, {ice_port_number_label}},
^~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/devlink/health.c:35:31: note: (near initialization for 'ice_health_status_lookup[0].data_label[0]')
drivers/net/ethernet/intel/ice/devlink/health.c:37:46: error: initializer element is not constant
"Change or replace the module or cable.", {ice_port_number_label}},
^~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/devlink/health.c:37:46: note: (near initialization for 'ice_health_status_lookup[1].data_label[0]')
drivers/net/ethernet/intel/ice/devlink/health.c:39:3: error: initializer element is not constant
ice_common_port_solutions, {ice_port_number_label}},
^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 85d6164ec56d ("ice: add fw and port health reporters")
Reported-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Closes: https://lore.kernel.org/netdev/CY8PR11MB7134BF7A46D71E50D25FA7A989F72@CY8PR11MB7134.namprd11.prod.outlook.com
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove hard-coded strings by using the str_enable_disable() helper
function.
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Remove hard-coded strings by using the str_enabled_disabled() helper
function.
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Reviewed-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
GCC compiler is not happy about NULL being supplied as printf() parameter:
drivers/mtd/mtdpart.c:693:34: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
Move the code after the parser test for NULL, and drop the ternary completely.
The user can deduct this since when it's not NULL two messages will be printed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Let's assume all these macros should not have a trailing comma, this way
the caller can use a more formal and usual C writing style, as reflected
in the Macronix driver.
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Add base support for HTU31 temperature and humidity sensor.
Besides temperature and humidity values, the driver also exports a 24-bit
heater control to sysfs and serial number to debugfs.
Signed-off-by: Andrei Lalaev <andrey.lalaev@gmail.com>
Link: https://lore.kernel.org/r/20250217051110.46827-2-andrey.lalaev@gmail.com
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Driver for Texas Instruments INA233 Current and Power Monitor
With I2C-, SMBus-, and PMBus-Compatible Interface
Signed-off-by: Leo Yang <leo.yang.sy0@gmail.com>
Link: https://lore.kernel.org/r/20250116085939.1235598-3-leo.yang.sy0@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.
Set gmac->interface from plat_dat->phy_interface.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGx-005v0F-Ev@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.
sun8i was using of_get_phy_mode() to set plat_dat->mac_interface, which
defaults to plat_dat->phy_interface when the mac-mode DT property is
not present. As nothing in arch/*/boot/dts sets the mac-mode property,
it is highly likely that these two will be identical, and thus there
is no need for this glue driver to set plat_dat->mac_interface.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGs-005v09-CD@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.
Pass plat_dat into sti_dwmac_parse_data(), and set dwmac->interface
from plat_dat->phy_interface.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGn-005v02-7G@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.
Set bsp_priv->phy_iface from plat->phy_interface.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGi-005uzx-3p@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.
Set dwmac->phy_mode from plat_dat->phy_interface.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGd-005uzr-0C@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.
Pass plat_dat into ipq806x_gmac_of_parse(), and set gmac->phy_mode from
plat_dat->phy_interface.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGX-005uzl-TQ@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.
Rearrange the initialisation order so we can pass plat_dat into
anarion_config_dt(), thereby providing plat_dat->phy_interface as
necessary there.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGS-005uzf-QE@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.
Initialise priv_plat->phy_mode from plat->phy_interface
inmediatek_dwmac_common_data().
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGN-005uzZ-NG@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it a second time in qcom_ethqos_probe(). Use
plat_dat->phy_interface to initialise ethqos->phy_mode.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGI-005uzT-KB@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge series from Dan Carpenter <dan.carpenter@linaro.org>:
Here are two fixes for Smatch warnings.
Dan Carpenter (2):
spi: sg2044-nor: fix signedness bug in sg2044_spifmc_write()
spi: sg2044-nor: Fix uninitialized variable in probe
drivers/spi/spi-sg2044-nor.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--
2.47.2
|
|
If vfs_flush() is called with queue frozen, the queue freeze lock may be
connected with FS internal lock, and lockdep warning can be triggered
because the queue freeze lock is connected with too many global or
sub-system locks.
Fix the warning by moving vfs_fsync() out of loop_update_dio():
- vfs_fsync() is only needed when switching to dio
- only loop_change_fd() and loop_configure() may switch from buffered
IO to direct IO, so call vfs_fsync() directly here. This way is safe
because either loop is in unbound, or new file isn't attached
- for the other two cases of set_status and set_block_size, direct IO
can only become off, so no need to call vfs_fsync()
Cc: Christoph Hellwig <hch@infradead.org>
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>
Reported-by: Jiaji Qin <jjtan24@m.fudan.edu.cn>
Closes: https://lore.kernel.org/linux-block/359BC288-B0B1-4815-9F01-3A349B12E816@m.fudan.edu.cn/T/#u
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250318072955.3893805-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merely enabling compile-testing should not enable additional
functionality.
Fixes: 7ff4faba63571c51 ("pinctrl: spacemit: enable config option")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/6881b8d1ad74ac780af8a974e604b5ef3f5d4aad.1742198691.git.geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with a flexible-array member in the
middle of multiple other structs, we use the `__struct_group()`
helper to create a new tagged `struct iwl_tx_cmd_hdr`. This structure
groups together all the members of the flexible `struct iwl_tx_cmd`
except the flexible array.
As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct members currently causing
trouble from `struct iwl_tx_cmd` to `struct iwl_tx_cmd_hdr`.
We also want to ensure that when new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
This approach avoids having to implement `struct iwl_tx_cmd_hdr`
as a completely separate structure, thus preventing having to maintain
two independent but basically identical structures, closing the door
to potential bugs in the future.
So, with these changes, fix the following warnings:
drivers/net/wireless/intel/iwlwifi/dvm/commands.h:2315:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlwifi/dvm/commands.h:2426:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/Zr5QR03+wyw571zd@elsanto
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Roll-back to use iwlmvm for those devices. iwlmld will support wifi7
capable devices only. The firmware for the non-wifi7 capable will soon
be frozen and we don't want iwlmld to have to support devices that will
require the old APIs.
Fixes: d1e879ec600f9 ("wifi: iwlwifi: add iwlmld sub-driver")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250318103019.df6df96df826.I0020ca9f6c6c928caa78721666df131a692c6186@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This led to weird behavior. The next debug print was not printed.
Fixes: d1e879ec600f9 ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250318103019.bf54d0474909.Icfb129d4cf13b42b13e2ac4aa1bd171ef46bf561@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
of_gpio.h should be deprecated, use "gpio/consumer.h".
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250318045549.1711502-1-peng.fan@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
They are a dependency for applying some changes to the MAINTAINERS
file.
|
|
Without this, the driver fails to build:
ld: drivers/firmware/thead,th1520-aon.o: in function `th1520_aon_call_rpc':
thead,th1520-aon.c:(.text+0x28): undefined reference to `mbox_send_message'
ld: drivers/firmware/thead,th1520-aon.o: in function `th1520_aon_deinit':
thead,th1520-aon.c:(.text+0x17e): undefined reference to `mbox_free_channel'
ld: drivers/firmware/thead,th1520-aon.o: in function `th1520_aon_init':
thead,th1520-aon.c:(.text+0x1d9): undefined reference to `mbox_request_channel_byname'
Fixes: e4b3cbd840e5 ("firmware: thead: Add AON firmware protocol driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250314154816.4045334-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Record the error code before freeing "aon_chan" to avoid a
use after free.
Fixes: e4b3cbd840e5 ("firmware: thead: Add AON firmware protocol driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/f19be994-d355-48a6-ab45-d0f7e5955daf@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-03-14
this is a pull request of 4 patches for net-next/main.
In the first 2 patches by Dimitri Fedrau add CAN transceiver support
to the flexcan driver.
Frank Li's patch adds i.MX94 support to the flexcan device tree
bindings.
The last patch is by Davide Caratti and adds protocol counter for
AF_CAN sockets.
linux-can-next-for-6.15-20250314
* tag 'linux-can-next-for-6.15-20250314' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: add protocol counter for AF_CAN sockets
dt-bindings: can: fsl,flexcan: add i.MX94 support
can: flexcan: add transceiver capabilities
dt-bindings: can: fsl,flexcan: add transceiver capabilities
====================
Link: https://patch.msgid.link/20250314132327.2905693-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-03-14
this is a pull request of 6 patches for net/main.
The first patch is by Vincent Mailhol and fixes an out of bound read
in strscpy() in the ucan driver.
Oliver Hartkopp contributes a patch for the af_can statistics to use
atomic access in the hot path.
The next 2 patches are by Biju Das, target the rcar_canfd driver and
fix the page entries in the AFL list.
The 2 patches by Haibo Chen for the flexcan driver fix the suspend and
resume functions.
linux-can-fixes-for-6.14-20250314
* tag 'linux-can-fixes-for-6.14-20250314' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: flexcan: disable transceiver during system PM
can: flexcan: only change CAN state when link up in system PM
can: rcar_canfd: Fix page entries in the AFL list
dt-bindings: can: renesas,rcar-canfd: Fix typo in pattern properties for R-Car V4M
can: statistics: use atomic access in hot path
can: ucan: fix out of bound read in strscpy() source
====================
Link: https://patch.msgid.link/20250314130909.2890541-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We use CD/DVD drives under Marvell 88SE9215 SATA controller on many
Loongson-based machines. We found its PIO doesn't work well, and on the
opposite its DMA seems work very well.
We don't know the detail of the 88SE9215 SATA controller, but we have
tested different CD/DVD drives and they all have problems under 88SE9215
(but they all work well under an Intel SATA controller). So, we consider
this problem is bound to 88SE9215 SATA controller rather than bound to
CD/DVD drives.
As a solution, we define a new dedicated AHCI board id which is named
board_ahci_yes_fbs_atapi_dma for 88SE9215, and for this id we set the
AHCI_HFLAG_ATAPI_DMA_QUIRK and ATA_QUIRK_ATAPI_MOD16_DMA flags on the
SATA controller in order to prefer ATAPI DMA.
Reported-by: Yuli Wang <wangyuli@uniontech.com>
Tested-by: Jie Fan <fanjie@uniontech.com>
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250318104314.2160526-1-chenhuacai@loongson.cn
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
According to GDMA protocol, holes (zeros) are allowed at the beginning
or middle of the gdma_list_devices_resp message. The existing code
cannot properly handle this, and may miss some devices in the list.
To fix, scan the entire list until the num_of_devs are found, or until
the end of the list.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@microsoft.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741723974-1534-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Registering the interrupts for TX or RX DMA Channels prior to registering
their respective NAPI callbacks can result in a NULL pointer dereference.
This is seen in practice as a random occurrence since it depends on the
randomness associated with the generation of traffic by Linux and the
reception of traffic from the wire.
Fixes: 681eb2beb3ef ("net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Co-developed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250311154259.102865-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove unnecessary casts to pointer types passed to kfree.
Issue detected by coccinelle:
@@
type t1;
expression *e;
@@
-kfree((t1 *)e);
+kfree(e);
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250311070624.1037787-1-nichen@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce `mlx5_esw_devlink_rate_node_parent_set()` to allow assigning
a parent to scheduling nodes.
Implement `mlx5_esw_qos_node_update_parent()` and
`mlx5_esw_qos_node_validate_set_parent()` to enforce constraints on
node reassignment.
Don't allow reassignment of nodes with active rate objects.
Update `esw_qos_node_set_parent()` to handle cases where
the parent is NULL. A NULL parent indicates that the scheduling element
is attached to the root scheduling element, and since only rate nodes
can be connected to the root, this update is now necessary.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1741642016-44918-5-git-send-email-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Modify `esw_qos_create_node_sched_elem()` to receive max_rate and
bw_share values while maintaining the previous configuration.
This change is essential for the upcoming patch that will modify rate
nodes and requires the existing settings to be preserved unless
explicitly changed.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1741642016-44918-4-git-send-email-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a `level` field to `mlx5_esw_sched_node` to track the hierarchy
depth of each scheduling node. This allows enforcement of the
scheduling depth constraints based on `log_esw_max_sched_depth`.
Modify `esw_qos_node_set_parent()` and `__esw_qos_alloc_node()` to
correctly assign hierarchy levels. Ensure that nodes inherit their
parent’s level incrementally.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1741642016-44918-3-git-send-email-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rename `mlx5_esw_devlink_rate_parent_set()` to
`mlx5_esw_devlink_rate_leaf_parent_set()` to distinguish setting a
parent for leafs from nodes, which is not yet supported.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1741642016-44918-2-git-send-email-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch resolves an issue where RF calibration data from a
file could not be downloaded to the firmware. The feature to
download calibration data from a file was broken by the commit:
d39fbc88956e.
The issue arose because the function `mwifiex_cmd_cfg_data()`
was modified in a way that prevented proper handling of
file-based calibration data. While this patch restores the ability
to download RF calibration data from a file, it may inadvertently
break the feature to download calibration data from the device
tree. This is because the function `mwifiex_dnld_dt_cfgdata()`,
which also relies on `mwifiex_cmd_cfg_data()`, is still used for
device tree-based calibration data downloads.
Fixes: d39fbc88956e ("mwifiex: remove cfg_data construction")
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Link: https://patch.msgid.link/20250318050739.2239376-3-jeff.chen_1@nxp.com
[add newline for shorter lines]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This patch resolves an issue where RF calibration data was being
released before the download process. Without this fix, the
external calibration data file would not be downloaded
at all.
Fixes: d39fbc88956e ("mwifiex: remove cfg_data construction")
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Link: https://patch.msgid.link/20250318050739.2239376-2-jeff.chen_1@nxp.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This patch addresses an issue where, despite the AP supporting 40MHz
bandwidth, the connection was limited to 20MHz. Without this fix,
even if the access point supports 40MHz, the bandwidth after
connection remains at 20MHz. This issue is not a regression.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250314094238.2097341-1-jeff.chen_1@nxp.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a debugfs entry to start/stop an MLO scan. This is required for
testing.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250313002008.1a1c2d285336.I5163ceb97ac797e3cf00badf79b9aa9355d7327d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It just added a field that we don't use. Claim support for this new
version.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.f3b668f41de7.Ib8d984c7158bf286adfb6d343955ff5f95b51d52@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwl_mld_remove_link removes the link from both the FW and from the
driver.
If removing it from the FW failed, we assume that the FW is
dead anyway and remove it from the driver as well.
On the other hand, we still return an error value, indicating the caller
(i.e. mac80211) that the link couldn't be removed - while it was
actually removed.
Later, mac80211 might tell the driver again to remove that link,
and then the driver will warn that it doesn't exist.
Fix this by making iwl_mld_remove_link a void function.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.16fe6ebae412.If5371ff7e096b7078ff9e98ff0e72010cd1f076d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwl_mld_emlsr_tmp_non_bss_done_wk used the wrong work name
(prevent_done_wk) to extract the mld_vif pointer,
so the pointer was a wrong one, leading to a page fault.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.aabb2232f9dd.I7cb24458a747e8363df2bf1ff848db6a9d472f60@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It is not used outside of fw.c.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.2d30c0b66734.I98cd21aeaf6e787af3ee3ed60d0ad8656ed8ec52@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add tests to check that iwl_mld_channel_load_allows_emlsr decides
correctly whether EMLSR is allowed or not.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250313002008.06fdf416c62f.If6e8f0e017287e79364eac9366f93c9ab964a673@changeid
[fix kunit visibility macro]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for .set_module_eeprom_by_page() callback
which implements generic solution for modules eeprom access.
This implementation also supports CMIS 5.0.3 compliant
eeprom FW download.
Sample Usage:
ethtool --flash-module-firmware enp177s0np0 file dummy.bin
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-8-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In preparation for adding .set_module_eeprom_by_page(), extract the
common error checking done in bnxt_get_module_eeprom_by_page() into
a new common function that can be re-used for
.set_module_eeprom_by_page().
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-7-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The main changes are adding i2c write for module eeprom and a new v2
PCIe statistics structure.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-6-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Newer FW can set the CAPS_CHANGE flag during ifup if some capabilities
or configurations have changed. For example, the CoS queue
configurations may have changed. Support this new flag by treating it
almost like FW reset. The driver will essentially rediscover all
features and capabilities, reconfigure all backing store context memory,
reset everything to default, and reserve all resources.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: shantiprasad shettar <shantiprasad.shettar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-5-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add set/show support for the ENABLE_ROCE NVM parameter to
enable/disable RoCE for a PF.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Co-developed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-4-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
