summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-08-14i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't workCarlos Song
On MX8X platforms, the default clock rate is 0 if without explicit clock setting in dts nodes. I2c can't work when i2c peripheral clk rate is 0. Add a i2c peripheral clk rate check before configuring the clock register. When i2c peripheral clk rate is 0 and directly return -EINVAL. Signed-off-by: Carlos Song <carlos.song@nxp.com> Acked-by: Dong Aisheng <Aisheng.dong@nxp.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-14drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docsLuca Ceresoli
Commit 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") added support for this panel model, but the timings it implements are very different from what the datasheet describes. I checked both the G121EAN01.0 datasheet from [0] and the G121EAN01.4 one from [1] and they all have the same timings: for example the LVDS clock typical value is 74.4 MHz, not 66.7 MHz as implemented. Replace the timings with the ones from the documentation. These timings have been tested and the clock frequencies verified with an oscilloscope to ensure they are correct. Also use struct display_timing instead of struct drm_display_mode in order to also specify the minimum and maximum values. [0] https://embedded.avnet.com/product/g121ean01-0/ [1] https://embedded.avnet.com/product/g121ean01-4/ Fixes: 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230804151239.835216-1-luca.ceresoli@bootlin.com
2023-08-14drm/panel: JDI LT070ME05000 simplify with dev_err_probe()David Heidelberg
Use the dev_err_probe() helper to simplify error handling during probe. This also handle scenario, when EDEFER is returned and useless error is printed. Fixes error: panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517 Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230812185239.378582-1-david@ixit.cz
2023-08-14spi: amd: fix Wvoid-pointer-to-enum-cast warningKrzysztof Kozlowski
'version' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: spi-amd.c:401:21: error: cast to smaller integer type 'enum amd_spi_versions' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230810091247.70149-3-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: pxa2xx: fix Wvoid-pointer-to-enum-cast warningKrzysztof Kozlowski
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: spi-pxa2xx.c:1347:10: error: cast to smaller integer type 'enum pxa_ssp_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230810091247.70149-2-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: sc18is602: fix Wvoid-pointer-to-enum-cast warningKrzysztof Kozlowski
'id' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: spi-sc18is602.c:269:12: error: cast to smaller integer type 'enum chips' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230810091247.70149-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: lantiq: switch to use modern nameYang Yingliang
Change legacy name master/slave to modern name host/target or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-21-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: jcore: switch to use modern nameYang Yingliang
Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-20-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: intel: switch to use modern nameYang Yingliang
Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-19-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: ingenic: switch to use devm_spi_alloc_host()Yang Yingliang
Switch to use modern name function devm_spi_alloc_host(). No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-18-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: imx: switch to use modern nameYang Yingliang
Change legacy name master/slave to modern name host/target. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-17-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: img-spfi: switch to use modern nameYang Yingliang
Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-16-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: hisi-sfc-v3xx: switch to use modern nameYang Yingliang
Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-15-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: bcmbca-hsspi: switch to use modern nameYang Yingliang
Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-14-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: gxp: switch to use modern nameYang Yingliang
Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-13-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: gpio: switch to use modern nameYang Yingliang
Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-12-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: fsl-spi: switch to use modern nameYang Yingliang
Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-11-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: fsl-qspi: switch to use modern nameYang Yingliang
Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-10-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: fsl-lpspi: switch to use modern nameYang Yingliang
Change legacy name master/target to modern name host/target No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-9-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: fsl-espi: switch to use modern nameYang Yingliang
Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-8-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: fsl-dspi: switch to use modern nameYang Yingliang
Change legacy name master/target to modern name host/target or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-7-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: fsi: switch to use spi_alloc_host()Yang Yingliang
Switch to use modern name function spi_alloc_host(). No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-6-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: falcon: switch to use modern nameYang Yingliang
Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-5-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: ep93xx: switch to use modern nameYang Yingliang
Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-4-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: au1550: switch to use modern nameYang Yingliang
Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-3-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14spi: amlogic-spifc-a1: switch to use devm_spi_alloc_host()Yang Yingliang
Switch to use modern name function devm_spi_alloc_host(). No functional changed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230807124105.3429709-2-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-14net: phy: Introduce PSGMII PHY interface modeGabor Juhos
The PSGMII interface is similar to QSGMII. The main difference is that the PSGMII interface combines five SGMII lines into a single link while in QSGMII only four lines are combined. Similarly to the QSGMII, this interface mode might also needs special handling within the MAC driver. It is commonly used by Qualcomm with their QCA807x PHY series and modern WiSoC-s. Add definitions for the PHY layer to allow to express this type of connection between the MAC and PHY. Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-14mlxsw: spectrum: Stop ignoring learning notifications from redirected trafficIdo Schimmel
As explained in the previous patch, with the ignore action prepended to the redirect action, it is not longer possible for redirected traffic to generate learning notifications. Therefore, remove the workaround that was added in commit 577fa14d2100 ("mlxsw: spectrum: Do not process learned records with a dummy FID") as it is no longer needed. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-14mlxsw: spectrum_flower: Disable learning and security lookup when redirectingIdo Schimmel
It is possible to add a filter that redirects traffic from the ingress of a bridge port that is locked (i.e., performs security / SMAC lookup) and has learning enabled. For example: # ip link add name br0 type bridge # ip link set dev swp1 master br0 # bridge link set dev swp1 learning on locked on mab on # tc qdisc add dev swp1 clsact # tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw src_ip 192.0.2.1 action mirred egress redirect dev swp2 In the kernel's Rx path, this filter is evaluated before the Rx handler of the bridge, which means that redirected traffic should not be affected by bridge port configuration such as learning. However, the hardware data path is a bit different and the redirect action (FORWARDING_ACTION in hardware) merely attaches a pointer to the packet, which is later used by the L2 lookup stage to understand how to forward the packet. Between both stages - ingress ACL and L2 lookup - learning and security lookup are performed, which means that redirected traffic is affected by bridge port configuration, unlike in the kernel's data path. The learning discrepancy was handled in commit 577fa14d2100 ("mlxsw: spectrum: Do not process learned records with a dummy FID") by simply ignoring learning notifications generated by the redirected traffic. A similar solution is not possible for the security / SMAC lookup since - unlike learning - the CPU is not involved and packets that failed the lookup are dropped by the device. Instead, solve this by prepending the ignore action to the redirect action and use it to instruct the device to disable both learning and the security / SMAC lookup for redirected traffic. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-14mlxsw: core_acl_flex_actions: Add IGNORE_ACTIONIdo Schimmel
Add the IGNORE_ACTION which is used to ignore basic switching functions such as learning on a per-packet basis. The action will be prepended to the FORWARDING_ACTION in subsequent patches. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-14net: stmmac: xgmac: show more MAC HW features in debugfsFurong Xu
1. Show TSSTSSEL(Timestamp System Time Source), ADDMACADRSEL(additional MAC addresses), SMASEL(SMA/MDIO Interface), HDSEL(Half-duplex Support) in debugfs. 2. Show exact number of additional MAC address registers for XGMAC2 core. 3. XGMAC2 core does not have different IP checksum offload types, so just show rx_coe instead of rx_coe_type1 or rx_coe_type2. 4. XGMAC2 core does not have rxfifo_over_2048 definition, skip it. Signed-off-by: Furong Xu <0x1207@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-14vxlan: Use helper functions to update statsLi Zetao
Use the helper functions dev_sw_netstats_rx_add() and dev_sw_netstats_tx_add() to update stats, which helps to provide code readability. Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-14net: macsec: Use helper functions to update statsLi Zetao
Use the helper functions dev_sw_netstats_rx_add() and dev_sw_netstats_tx_add() to update stats, which helps to provide code readability. Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-14vmxnet3: Add XDP support.William Tu
The patch adds native-mode XDP support: XDP DROP, PASS, TX, and REDIRECT. Background: The vmxnet3 rx consists of three rings: ring0, ring1, and dataring. For r0 and r1, buffers at r0 are allocated using alloc_skb APIs and dma mapped to the ring's descriptor. If LRO is enabled and packet size larger than 3K, VMXNET3_MAX_SKB_BUF_SIZE, then r1 is used to mapped the rest of the buffer larger than VMXNET3_MAX_SKB_BUF_SIZE. Each buffer in r1 is allocated using alloc_page. So for LRO packets, the payload will be in one buffer from r0 and multiple from r1, for non-LRO packets, only one descriptor in r0 is used for packet size less than 3k. When receiving a packet, the first descriptor will have the sop (start of packet) bit set, and the last descriptor will have the eop (end of packet) bit set. Non-LRO packets will have only one descriptor with both sop and eop set. Other than r0 and r1, vmxnet3 dataring is specifically designed for handling packets with small size, usually 128 bytes, defined in VMXNET3_DEF_RXDATA_DESC_SIZE, by simply copying the packet from the backend driver in ESXi to the ring's memory region at front-end vmxnet3 driver, in order to avoid memory mapping/unmapping overhead. In summary, packet size: A. < 128B: use dataring B. 128B - 3K: use ring0 (VMXNET3_RX_BUF_SKB) C. > 3K: use ring0 and ring1 (VMXNET3_RX_BUF_SKB + VMXNET3_RX_BUF_PAGE) As a result, the patch adds XDP support for packets using dataring and r0 (case A and B), not the large packet size when LRO is enabled. XDP Implementation: When user loads and XDP prog, vmxnet3 driver checks configurations, such as mtu, lro, and re-allocate the rx buffer size for reserving the extra headroom, XDP_PACKET_HEADROOM, for XDP frame. The XDP prog will then be associated with every rx queue of the device. Note that when using dataring for small packet size, vmxnet3 (front-end driver) doesn't control the buffer allocation, as a result we allocate a new page and copy packet from the dataring to XDP frame. The receive side of XDP is implemented for case A and B, by invoking the bpf program at vmxnet3_rq_rx_complete and handle its returned action. The vmxnet3_process_xdp(), vmxnet3_process_xdp_small() function handles the ring0 and dataring case separately, and decides the next journey of the packet afterward. For TX, vmxnet3 has split header design. Outgoing packets are parsed first and protocol headers (L2/L3/L4) are copied to the backend. The rest of the payload are dma mapped. Since XDP_TX does not parse the packet protocol, the entire XDP frame is dma mapped for transmission and transmitted in a batch. Later on, the frame is freed and recycled back to the memory pool. Performance: Tested using two VMs inside one ESXi vSphere 7.0 machine, using single core on each vmxnet3 device, sender using DPDK testpmd tx-mode attached to vmxnet3 device, sending 64B or 512B UDP packet. VM1 txgen: $ dpdk-testpmd -l 0-3 -n 1 -- -i --nb-cores=3 \ --forward-mode=txonly --eth-peer=0,<mac addr of vm2> option: add "--txonly-multi-flow" option: use --txpkts=512 or 64 byte VM2 running XDP: $ ./samples/bpf/xdp_rxq_info -d ens160 -a <options> --skb-mode $ ./samples/bpf/xdp_rxq_info -d ens160 -a <options> options: XDP_DROP, XDP_PASS, XDP_TX To test REDIRECT to cpu 0, use $ ./samples/bpf/xdp_redirect_cpu -d ens160 -c 0 -e drop Single core performance comparison with skb-mode. 64B: skb-mode -> native-mode XDP_DROP: 1.6Mpps -> 2.4Mpps XDP_PASS: 338Kpps -> 367Kpps XDP_TX: 1.1Mpps -> 2.3Mpps REDIRECT-drop: 1.3Mpps -> 2.3Mpps 512B: skb-mode -> native-mode XDP_DROP: 863Kpps -> 1.3Mpps XDP_PASS: 275Kpps -> 376Kpps XDP_TX: 554Kpps -> 1.2Mpps REDIRECT-drop: 659Kpps -> 1.2Mpps Demo: https://youtu.be/4lm1CSCi78Q Future work: - XDP frag support - use napi_consume_skb() instead of dev_kfree_skb_any at unmap - stats using u64_stats_t - using bitfield macro BIT() - optimization for DMA synchronization using actual frame length, instead of always max_len Signed-off-by: William Tu <u9012063@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-13x86/microcode/intel: Rename get_datasize() since its used externallyAshok Raj
Rename get_datasize() to intel_microcode_get_datasize() and make it an inline. [ tglx: Make the argument typed and fix up the IFS code ] Suggested-by: Boris Petkov <bp@alien8.de> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230812195727.894165745@linutronix.de
2023-08-13x86/microcode: Include vendor headers into microcode.hAshok Raj
Currently vendor specific headers are included explicitly when used in common code. Instead, include the vendor specific headers in microcode.h, and include that in all usages. No functional change. Suggested-by: Boris Petkov <bp@alien8.de> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230812195727.776541545@linutronix.de
2023-08-13Merge tag 'platform-drivers-x86-v6.5-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers fixes from Hans de Goede: - lenovo-ymc driver causes keyboard + touchpad to not work with >= 6.4 on some Thinkbook models, fix this - A set of small fixes for mlx-platform - Other small fixes and hw-id additions * tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: lenovo-ymc: Only bind on machines with a convertible DMI chassis-type platform: mellanox: Change register offset addresses platform: mellanox: mlx-platform: Modify graceful shutdown callback and power down mask platform: mellanox: mlx-platform: Fix signals polarity and latch mask platform: mellanox: Fix order in exit flow platform/x86: ISST: Reduce noise for missing numa information in logs platform/x86: msi-ec: Fix the build ACPI: scan: Create platform device for CS35L56 platform/x86/amd/pmf: Fix unsigned comparison with less than zero
2023-08-13Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Eleven small fixes, ten in drivers. Of the two fixes marked core, one is in the raid helper class (used by some raid device drivers) and the other one is the /proc/scsi/scsi parsing fix for potential reads beyond the end of the buffer" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedf: Fix firmware halt over suspend and resume scsi: qedi: Fix firmware halt over suspend and resume scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock scsi: lpfc: Remove reftag check in DIF paths scsi: ufs: renesas: Fix private allocation scsi: snic: Fix possible memory leak if device_add() fails scsi: core: Fix possible memory leak if device_add() fails scsi: core: Fix legacy /proc parsing buffer overflow scsi: 53c700: Check that command slot is not NULL scsi: fnic: Replace return codes in fnic_clean_pending_aborts() scsi: storvsc: Fix handling of virtual Fibre Channel timeouts
2023-08-13Merge tag 'for-net-next-2023-08-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next bluetooth-next pull request for net-next: - Add new VID/PID for Mediatek MT7922 - Add support multiple BIS/BIG - Add support for Intel Gale Peak - Add support for Qualcomm WCN3988 - Add support for BT_PKT_STATUS for ISO sockets - Various fixes for experimental ISO support - Load FW v2 for RTL8852C - Add support for NXP AW693 chipset - Add support for Mediatek MT2925
2023-08-13platform/x86: lenovo-ymc: Only bind on machines with a convertible DMI ↵Hans de Goede
chassis-type The lenovo-ymc driver is causing the keyboard + touchpad to stop working on some regular laptop models such as the Lenovo ThinkBook 13s G2 ITL 20V9. The problem is that there are YMC WMI GUID methods in the ACPI tables of these laptops, despite them not being Yogas and lenovo-ymc loading causes libinput to see a SW_TABLET_MODE switch with state 1. This in turn causes libinput to ignore events from the builtin keyboard and touchpad, since it filters those out for a Yoga in tablet mode. Similar issues with false-positive SW_TABLET_MODE=1 reporting have been seen with the intel-hid driver. Copy the intel-hid driver approach to fix this and only bind to the WMI device on machines where the DMI chassis-type indicates the machine is a convertible. Add a 'force' module parameter to allow overriding the chassis-type check so that users can easily test if the YMC interface works on models which report an unexpected chassis-type. Fixes: e82882cdd241 ("platform/x86: Add driver for Yoga Tablet Mode switch") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2229373 Cc: André Apitzsch <git@apitzsch.eu> Cc: stable@vger.kernel.org Tested-by: Andrew Kallmeyer <kallmeyeras@gmail.com> Tested-by: Gergő Köteles <soyer@irl.hu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230812144818.383230-1-hdegoede@redhat.com
2023-08-13platform: mellanox: Change register offset addressesVadim Pasternak
Move debug register offsets to different location due to hardware changes. Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20230813083735.39090-5-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-13platform: mellanox: mlx-platform: Modify graceful shutdown callback and ↵Vadim Pasternak
power down mask Use kernel_power_off() instead of kernel_halt() to pass through machine_power_off() -> pm_power_off(), otherwise axillary power does not go off. Change "power down" bitmask. Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20230813083735.39090-4-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-13platform: mellanox: mlx-platform: Fix signals polarity and latch maskVadim Pasternak
Change polarity of chassis health and power signals and fix latch reset mask for L1 switch. Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20230813083735.39090-3-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-13platform: mellanox: Fix order in exit flowVadim Pasternak
Fix exit flow order: call mlxplat_post_exit() after mlxplat_i2c_main_exit() in order to unregister main i2c driver before to "mlxplat" driver. Fixes: 0170f616f496 ("platform: mellanox: Split initialization procedure") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20230813083735.39090-2-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-13net: pcs: lynx: fix lynx_pcs_link_up_sgmii() not doing anything in ↵Vladimir Oltean
fixed-link mode lynx_pcs_link_up_sgmii() is supposed to update the PCS speed and duplex for the non-inband operating modes, and prior to the blamed commit, it did just that, but a mistake sneaked into the conversion and reversed the condition. It is easy for this to go undetected on platforms that also initialize the PCS in the bootloader, because Linux doesn't reset it (although maybe it should). The nature of the bug is that phylink will not touch the IF_MODE_HALF_DUPLEX | IF_MODE_SPEED_MSK fields when it should, and it will apparently keep working if the previous values set by the bootloader were correct. Fixes: c689a6528c22 ("net: pcs: lynx: update PCS driver to use neg_mode") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-13net: ngbe: use pci_dev_id() to simplify the codeZheng Zengkai
PCI core API pci_dev_id() can be used to get the BDF number for a pci device. We don't need to compose it manually. Use pci_dev_id() to simplify the code a little bit. Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-13net: tc35815: Use pci_dev_id() to simplify the codeZheng Zengkai
PCI core API pci_dev_id() can be used to get the BDF number for a pci device. We don't need to compose it manually. Use pci_dev_id() to simplify the code a little bit. Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-13net: smsc: Use pci_dev_id() to simplify the codeZheng Zengkai
PCI core API pci_dev_id() can be used to get the BDF number for a pci device. We don't need to compose it manually. Use pci_dev_id() to simplify the code a little bit. Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-13tg3: Use pci_dev_id() to simplify the codeZheng Zengkai
PCI core API pci_dev_id() can be used to get the BDF number for a pci device. We don't need to compose it manually. Use pci_dev_id() to simplify the code a little bit. Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-13et131x: Use pci_dev_id() to simplify the codeZheng Zengkai
PCI core API pci_dev_id() can be used to get the BDF number for a pci device. We don't need to compose it manually. Use pci_dev_id() to simplify the code a little bit. Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-02 16:17:47 +0000