| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
DPIA doesn't support UHBR, driver should not enable UHBR
for dp tunneling
[How]
limit DPIA link rate to HBR3
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Peichen Huang <peichen.huang@amd.com>
Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When the PSR enabled. If you try to adjust the timing parameters,
it may cause system hang. Because the timing mismatch with the
DMCUB settings.
[How]
Disable the PSR before adjusting timing parameters.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why] most edp support only timings from edid. applying
non-edid timings, especially those timings out of edp
bandwidth, may damage edp.
[How] do not add non-edid timings for edp.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
system"
This reverts commit c105518679b6e87232874ffc989ec403bee59664.
This patch disables the TOPDOWN flag for APU and few dGPU cards
which has the VRAM size equal to the BAR size.
When we enable the TOPDOWN flag, we get the free blocks at
the highest available memory region and we don't split the
lower order blocks. This change is required to keep off
the fragmentation related issues particularly in ASIC
which has VRAM space <= 500MiB
Hence, we are reverting this patch.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2270
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Only vcn0 can process AV1 codecx. In order to use both vcn0 and
vcn1 in h264/265 transcode to AV1 cases, set vcn0 sched score to 1
at initialization time.
Signed-off-by: Sonny Jiang <sonjiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Disable the modesetting pipeline before release the radeon's fbdev
client. Fixes the following error:
[ 17.217408] WARNING: CPU: 5 PID: 1464 at drivers/gpu/drm/ttm/ttm_bo.c:326 ttm_bo_release+0x27e/0x2d0 [ttm]
[ 17.217418] Modules linked in: edac_mce_amd radeon(+) drm_ttm_helper ttm video drm_suballoc_helper drm_display_helper kvm irqbypass drm_kms_helper syscopyarea crc32_pclmul sysfillrect sha512_ssse3 sysimgblt sha512_generic cfbfillrect cfbimgblt wmi_bmof aesni_intel cfbcopyarea crypto_simd cryptd k10temp acpi_cpufreq wmi dm_mod
[ 17.217432] CPU: 5 PID: 1464 Comm: systemd-udevd Not tainted 6.4.0-rc4+ #1
[ 17.217436] Hardware name: Micro-Star International Co., Ltd. MS-7A38/B450M PRO-VDH MAX (MS-7A38), BIOS B.G0 07/26/2022
[ 17.217438] RIP: 0010:ttm_bo_release+0x27e/0x2d0 [ttm]
[ 17.217444] Code: 48 89 43 38 48 89 43 40 48 8b 5c 24 30 48 8b b5 40 08 00 00 48 8b 6c 24 38 48 83 c4 58 e9 7a 49 f7 e0 48 89 ef e9 6c fe ff ff <0f> 0b 48 83 7b 20 00 0f 84 b7 fd ff ff 0f 0b 0f 1f 00 e9 ad fd ff
[ 17.217448] RSP: 0018:ffffc9000095fbb0 EFLAGS: 00010202
[ 17.217451] RAX: 0000000000000001 RBX: ffff8881052c8de0 RCX: 0000000000000000
[ 17.217453] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8881052c8de0
[ 17.217455] RBP: ffff888104a66e00 R08: ffff8881052c8de0 R09: ffff888104a7cf08
[ 17.217457] R10: ffffc9000095fbe0 R11: ffffc9000095fbe8 R12: ffff8881052c8c78
[ 17.217458] R13: ffff8881052c8c78 R14: dead000000000100 R15: ffff88810528b108
[ 17.217460] FS: 00007f319fcbb8c0(0000) GS:ffff88881a540000(0000) knlGS:0000000000000000
[ 17.217463] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 17.217464] CR2: 000055dc8b0224a0 CR3: 000000010373d000 CR4: 0000000000750ee0
[ 17.217466] PKRU: 55555554
[ 17.217468] Call Trace:
[ 17.217470] <TASK>
[ 17.217472] ? __warn+0x97/0x160
[ 17.217476] ? ttm_bo_release+0x27e/0x2d0 [ttm]
[ 17.217481] ? report_bug+0x1ec/0x200
[ 17.217487] ? handle_bug+0x3c/0x70
[ 17.217490] ? exc_invalid_op+0x1f/0x90
[ 17.217493] ? preempt_count_sub+0xb5/0x100
[ 17.217496] ? asm_exc_invalid_op+0x16/0x20
[ 17.217500] ? ttm_bo_release+0x27e/0x2d0 [ttm]
[ 17.217505] ? ttm_resource_move_to_lru_tail+0x1ab/0x1d0 [ttm]
[ 17.217511] radeon_bo_unref+0x1a/0x30 [radeon]
[ 17.217547] radeon_gem_object_free+0x20/0x30 [radeon]
[ 17.217579] radeon_fbdev_fb_destroy+0x57/0x90 [radeon]
[ 17.217616] unregister_framebuffer+0x72/0x110
[ 17.217620] drm_client_dev_unregister+0x6d/0xe0
[ 17.217623] drm_dev_unregister+0x2e/0x90
[ 17.217626] drm_put_dev+0x26/0x90
[ 17.217628] pci_device_remove+0x44/0xc0
[ 17.217631] really_probe+0x257/0x340
[ 17.217635] __driver_probe_device+0x73/0x120
[ 17.217638] driver_probe_device+0x2c/0xb0
[ 17.217641] __driver_attach+0xa0/0x150
[ 17.217643] ? __pfx___driver_attach+0x10/0x10
[ 17.217646] bus_for_each_dev+0x67/0xa0
[ 17.217649] bus_add_driver+0x10e/0x210
[ 17.217651] driver_register+0x5c/0x120
[ 17.217653] ? __pfx_radeon_module_init+0x10/0x10 [radeon]
[ 17.217681] do_one_initcall+0x44/0x220
[ 17.217684] ? kmalloc_trace+0x37/0xc0
[ 17.217688] do_init_module+0x64/0x240
[ 17.217691] __do_sys_finit_module+0xb2/0x100
[ 17.217694] do_syscall_64+0x3b/0x90
[ 17.217697] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 17.217700] RIP: 0033:0x7f319feaa5a9
[ 17.217702] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 08 0d 00 f7 d8 64 89 01 48
[ 17.217706] RSP: 002b:00007ffc6bf3e7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 17.217709] RAX: ffffffffffffffda RBX: 00005607204f3170 RCX: 00007f319feaa5a9
[ 17.217710] RDX: 0000000000000000 RSI: 00007f31a002eefd RDI: 0000000000000018
[ 17.217712] RBP: 00007f31a002eefd R08: 0000000000000000 R09: 00005607204f1860
[ 17.217714] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000020000
[ 17.217716] R13: 0000000000000000 R14: 0000560720522450 R15: 0000560720255899
[ 17.217718] </TASK>
[ 17.217719] ---[ end trace 0000000000000000 ]---
The buffer object backing the fbdev emulation got pinned twice: by the
fb_probe helper radeon_fbdev_create_pinned_object() and the modesetting
code when the framebuffer got displayed. It only got unpinned once by
the fbdev helper radeon_fbdev_destroy_pinned_object(). Hence TTM's BO-
release function complains about the pin counter. Forcing the outputs
off also undoes the modesettings pin increment.
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reported-by: Borislav Petkov <bp@alien8.de>
Closes: https://lore.kernel.org/dri-devel/20230603174814.GCZHt83pN+wNjf63sC@fat_crate.local/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On smu 13.0.0, the compute workload type cannot be set on all the skus
due to some other problems. This workaround is to make sure compute workload type
can also run on some specific skus.
v2: keep the variable consistent
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Non-root users shouldn't be able to try to trigger a VBIOS flash
or query the flashing status. This should be reserved for users with the
appropriate permissions.
Cc: stable@vger.kernel.org
Fixes: 8424f2ccb3c0 ("drm/amdgpu/psp: Add vbflash sysfs interface support")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The VBIOS image update flow requires userspace to:
1) Write the image to `psp_vbflash`
2) Read `psp_vbflash`
3) Poll `psp_vbflash_status` to check for completion
If userspace reads `psp_vbflash` before writing an image, it's
possible that it causes problems that can put the dGPU into an invalid
state.
Explicitly check that an image has been written before letting a read
succeed.
Cc: stable@vger.kernel.org
Fixes: 8424f2ccb3c0 ("drm/amdgpu/psp: Add vbflash sysfs interface support")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
0x5b70 is a missing RV370 secondary id. Add it so
we don't try and probe it with amdgpu.
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Patch the packages including CONTEXT_CONTROL and WRITE_DATA for gfx9
during the resubmission scenario.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.3.x
|
|
When the preempted IB frame resubmitted to cp, we need to modify the frame
data including:
1. set PRE_RESUME 1 in CONTEXT_CONTROL.
2. use meta data(DE and CE) read from CSA in WRITE_DATA.
Add functions to save the location the first time IBs emitted and callback
to patch the package when resubmission happens.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.3.x
|
|
It is firmware requirement to set gds_backup_addrlo and gds_backup_addrhi
of DE meta both zero if no gds partition is allocated for the frame.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.3.x
|
|
Pointer nv_encoder could be dereferenced at nouveau_connector.c
in case it's equal to NULL by jumping to goto label.
This patch adds a NULL-check to avoid it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 3195c5f9784a ("drm/nouveau: set encoder for lvds")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Fixed patch title]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512103320.82234-1-n.petrova@fintech.ru
|
|
When MEC executes unmap_queue for mid command buffer preemption, it will
kick the write pointer of the gfx ring, set CP_VMID_PREEMPT to trigger the
preemption and wait for CP_VMID_PREEMPT becomes zero after the preemption
done. There is a race condition that PFP may excute the resetting command
before MEC set CP_VMID_PREEMPT. As a result, hang happens as
CP_VMID_PREEMPT is always 0xffff.
To avoid this, we send resetting CP_VMID_PREEMPT command after the trailing
fence is siganled and update gfx write pointer explicitly.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.3.x
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2535
|
|
Add checking for NULL before calling nouveau_connector_detect_depth() in
nouveau_connector_get_modes() function because nv_connector->native_mode
could be dereferenced there since connector pointer passed to
nouveau_connector_detect_depth() and the same value of
nv_connector->native_mode is used there.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d4c2c99bdc83 ("drm/nouveau/dp: remove broken display depth function, use the improved one")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512111526.82408-1-n.petrova@fintech.ru
|
|
Commit 445164e8c136 ("spi: dw: Replace spi->chip_select references with
function calls") replaced direct access to spi.chip_select with
spi_*_chipselect calls but incorrectly replaced a set instance with a
get instance, replace the incorrect instance.
Fixes: 445164e8c136 ("spi: dw: Replace spi->chip_select references with function calls")
Signed-off-by: Abe Kohandel <abe.kohandel@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230613162103.569812-1-abe.kohandel@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
best_parent_rate entry is still being used in the code and needs to be
always updated regardless of the CLK_SET_RATE_NO_REPARENT flag.
Fixes: 1b4e99fda73f ("clk: Move no reparent case into a separate function")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230613131631.270192-1-m.szyprowski@samsung.com
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The devm_ioremap() function returns NULL on error, it never returns
error pointers.
Fixes: a77b2a0b1280 ("soc: qcom: Introduce RPM master stats driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/ZH7sgpLAN23bCz9v@moroto
|
|
Add support for below fields coming in socinfo structure under v19:
* num_func_clusters: number of clusters with at least one functional core
* boot_cluster: cluster selected as boot cluster
* boot_core: core selected as boot core
While at it, rename some variables to align them with their
functionalities.
Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230606134626.18790-3-quic_namajain@quicinc.com
|
|
Add support for below fields coming in socinfo structure under v18:
* num_kvps: number of key value pairs (KVP)
* kvps_offset: the offset of the KVP table from the base address of
socinfo structure in SMEM
KVP table has boolean values for certain feature flags, used to determine
hardware configuration.
Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230606134626.18790-2-quic_namajain@quicinc.com
|
|
Add support for the lpass audio clock controller found on SC8280XP based
devices. This would allow lpass peripheral loader drivers to control the
clocks and bring the subsystems out of reset.
Currently this patch only supports resets as the Q6DSP is in control of
LPASS IP which manages most of the clocks via Q6PRM service on GPR rpmsg
channel.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-5-srinivas.kandagatla@linaro.org
|
|
Add support for the lpass clock controller found on SC8280XP based devices.
This would allow lpass peripheral loader drivers to control the clocks and
bring the subsystems out of reset.
Currently this patch only supports resets as the Q6DSP is in control of
LPASS IP which manages most of the clocks via Q6PRM service on GPR rpmsg
channel.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-4-srinivas.kandagatla@linaro.org
|
|
Smatch error:buffer overflow 'ti_sn_bridge_refclk_lut' 5 <= 5.
Fixes: cea86c5bb442 ("drm/bridge: ti-sn65dsi86: Implement the pwm_chip")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230608012443.839372-1-suhui@nfschina.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix missing of_node_put() in init_overlay_changeset()
- Fix schema for qcom,pmic-mpp "qcom,paired" property
- Fix 'additionalProperties' in silvaco,i3c-master binding
- usage-model.rst: Use documented "arm,primecell" compatible string
- Update Damien Le Moal's email address
- Fixes in Realtek Bluetooth binding
* tag 'devicetree-fixes-for-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pinctrl: qcom,pmic-mpp: Fix schema for "qcom,paired"
dt-bindings: i3c: silvaco,i3c-master: fix missing schema restriction
of: overlay: Fix missing of_node_put() in error case of init_overlay_changeset()
docs: zh_CN/devicetree: sync usage-model fix
docs: dt: fix documented Primecell compatible string
dt-bindings: Change Damien Le Moal's contact email
dt-bindings: net: realtek-bluetooth: Fix double RTL8723CS in desc
dt-bindings: net: realtek-bluetooth: Fix RTL8821CS binding
|
|
The enhanced detection introduced in commit '210d12c8197a ("soc: qcom:
mdt_loader: Enhance split binary detection")' requires that all segments
lies within the file on disk.
But the Qualcomm firmware files consistently has a BSS-like segment at
the end, with a p_offset aligned to the next 4k boundary. As the p_size
is 0 and there's nothing to load, the image is not padded to cover this
(empty) segment.
Ignore zero-sized segments when determining if the image is split, to
avoid this problem.
Fixes: 210d12c8197a ("soc: qcom: mdt_loader: Enhance split binary detection")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # qrb5165-rb5
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612215804.1883458-1-quic_bjorande@quicinc.com
|
|
Export Passive version 2 table similar to the way _TRT and _ART tables
via IOCTLs.
This removes need for binary utility to read ACPI Passive 2 table by
providing open source support. This table already has open source
implementation in the user space thermald, when the table is part of
data vault exported by the int3400 sysfs.
This table is supported in some older platforms before Ice Lake
generation.
Passive 2 tables contain multiple entries. Each entry has following
fields:
* Source: Named Reference (String). This is the source device for
temperature.
* Target: Named Reference (String). This is the target device to
control.
* Priority: Priority of this device compared to others.
* SamplingPeriod: Time Period in 1/10 of seconds unit.
* PassiveTemp: Passive Temperature in 1/10 of Kelvin.
* SourceDomain: Domain for the source (00:Processor, others reserved).
* ControlKnob: Type of control knob (00:Power Limit 1, others: reserved)
* Limit: The target state to set on reaching passive temperature.
This can be a string "max", "min" or a power limit value.
* LimitStepSize: Step size during activation.
* UnLimitStepSize: Step size during deactivation.
* Reserved1: Reserved
Three IOCTLs are added similar to IOCTLs for reading TRT:
ACPI_THERMAL_GET_PSVT_COUNT: Number of passive 2 entries.
ACPI_THERMAL_GET_PSVT_LEN: Total return data size (count x each
passive 2 entry size).
ACPI_THERMAL_GET_PSVT: Get the data as an array of objects with
passive 2 entries.
This change is based on original development done by:
Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog and subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add back the accidentally dropped mode parameter.
Fixes: b60f7635788a ("swim3: fix the floppy_locked_ioctl prototype")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230613154309.327557-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the missing check for platform_get_irq() and return error code
if it fails.
The returned error code will be dealed with in
builtin_platform_driver(sifive_gpio_driver) and the driver will not
be registered.
Fixes: f52d6d8b43e5 ("gpio: sifive: To get gpio irq offset from device tree data")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The way that the timeout is currently calculated could lead to a u64
timeout value in mmci_start_command(). This value is then cast in a u32
register that leads to mmc erase failed issue with some SD cards.
Fixes: 8266c585f489 ("mmc: mmci: add hardware busy timeout feature")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230613134146.418016-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When using dm-verity with a data partition on an emmc device, dm-verity
races with the initialization of the (e)MMC/SD cards. This is because the
card detection procedure is being managed from a workqueue, rather than
synchronously from the mmc host's ->probe() routine.
To allow the card detect to be synchronous, let's simply skip using the
workqueue at the first initialization attempt from mmc_start_host().
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Link: https://lore.kernel.org/r/ZCTOMVjW+pnZVGsQ@snowbird
[Ulf: Re-wrote the commit message to clarify the change]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
All mmc host drivers should have the asynchronous probe option enabled, but
it seems like we failed to set it for mmci, so let's do that now.
Fixes: 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Yann Gautier <yann.gautier@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230612143730.210390-1-ulf.hansson@linaro.org
|
|
Add support for TPS65219 PMICs GPIO interface.
3 GPIO pins:
- GPIO0 only is IO but input mode reserved for MULTI_DEVICE_ENABLE usage.
- GPIO1 and GPIO2 are Output only and referred as GPO1 and GPO2 in spec.
GPIO0 is statically configured as input or output prior to Linux boot.
it is used for MULTI_DEVICE_ENABLE function.
This setting is statically configured by NVM.
GPIO0 can't be used as a generic GPIO (specification Table 8-34).
It's either a GPO when MULTI_DEVICE_EN=0 or a GPI when MULTI_DEVICE_EN=1.
Datasheet describes specific usage for non standard GPIO.
Datasheet: https://www.ti.com/lit/ds/symlink/tps65219.pdf
Co-developed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In case of gpio-regmap, IRQ chip is added by regmap-irq and associated with
GPIO chip by gpiochip_irqchip_add_domain(). The initialization flag was not
added in gpiochip_irqchip_add_domain(), causing gpiochip_to_irq() to return
-EPROBE_DEFER.
Fixes: 5467801f1fcb ("gpio: Restrict usage of GPIO chip irq members before initialization")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
`_regmap_update_bits()` checks if the current register value differs
from the new value, and only writes to the register if they differ. When
testing hardware drivers, it might be desirable to always force a
register write, for example when writing to a `regmap_field`. This
enables and simplifies testing and verification of the hardware
interaction. For example, when using a hardware mock/simulation model,
one can then more easily verify that the driver makes the correct
expected register writes during certain events.
Add a bool variable `force_write_field` and a corresponding debugfs
entry to enable this. Since this feature could interfere with driver
operation, guard it with a macro.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/pnd1qifa7sj.fsf@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
regcache_maple_sync() tries to sync all cached values no matter
whether it's writable or not. OTOH, regache_sync_val() does care the
wrtability and returns -EIO for a read-only register. This results in
an error message like:
snd_hda_codec_realtek hdaudioC0D0: Unable to sync register 0x2f0009. -5
and the sync loop is aborted incompletely.
This patch adds the writable register check to regcache_sync_val() for
addressing the bug above.
Note that, although we may add the check in the caller side
(regcache_maple_sync()), here we put in regcache_sync_val(), so that a
similar case like this can be avoided in future.
Fixes: f033c26de5a5 ("regmap: Add maple tree based register cache")
Link: https://lore.kernel.org/r/877cs7g6f1.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230613112240.3361-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On multi package system, the TPMI SST instance is getting allocated
again as the usage counter is not getting incremented. Here the
instance is allocated only when the usage count is zero. There is
no need to allocate again.
Increment usage ID on successful return from isst_if_cdev_register().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230612224033.2382527-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
When multiple clients are registered and some of those modules are
removed, the default IOCTL callback for those clients are still not
NULL. Calling them will result in crash.
Set the default IOCTL callback pointer to NULL on unregister.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230612224033.2382527-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use abs() instead of hand-writing it.
Suggested-by: Walter Harms <wharms@bfs.de>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Message-ID: <7bd165e82ed3675d4ddee343ab373031e995a126.1686412569.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
iterating clk
When the best clk is searched, we iterate over all possible clk.
If we find a better match, the previous one, if any, needs to be freed.
If a better match has already been found, we still need to free the new
one, otherwise it leaks.
Cc: <stable@vger.kernel.org> # v3.3+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Message-ID: <cf3e0053d2fc7391b2d906a86cd01a5ef15fb9dc.1686412569.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
case of error
If clk_get_rate() fails, the clk that has just been allocated needs to be
freed.
Cc: <stable@vger.kernel.org> # v3.3+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Message-ID: <e4baf6039368f52e5a5453982ddcb9a330fc689e.1686412569.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230612073902.840435-4-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230612073902.840435-3-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
.probe()
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230612073902.840435-2-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
LS1028A is using DMA with LPUART. Having RX watermark set to 1, means
DMA transactions are started only after receiving the second character.
On other platforms with newer LPUART IP, Receiver Idle Empty function
initiates the DMA request after the receiver is idling for 4 characters.
But this feature is missing on LS1028A, which is causing a 1-character
delay in the RX direction on this platform.
Set RX watermark to 0 to initiate RX DMA after each character.
Link: https://lore.kernel.org/linux-serial/20230607103459.1222426-1-robert.hodaszi@digi.com/
Fixes: 9ad9df844754 ("tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case")
Cc: stable <stable@kernel.org>
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
Message-ID: <20230609121334.1878626-1-robert.hodaszi@digi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An earlier commit placed some driverless devices in D3 during boot so that
they don't block package cstate entry on Meteor Lake. Also place these
devices in D3 after resume from suspend.
Fixes: 336ba968d3e3 ("platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230607233849.239047-2-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add a resume callback to perform platform specific functions during resume
from suspend.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230607233849.239047-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The need to handle the FSL variant of 8250 in a special way is also
present without console support. So soften the dependency for
SERIAL_8250_FSL from SERIAL_8250_CONSOLE to SERIAL_8250. To handle
SERIAL_8250=m, the FSL code can be modular, too, thus SERIAL_8250_FSL
becomes tristate.
Compiling 8250_fsl as a module requires adding a module license so this
is added, too. While add it also add a appropriate module description.
As then SERIAL_OF_PLATFORM=y + SERIAL_8250_FSL=m is a valid combination
(if COMPILE_TEST is enabled on a platform that is neither PPC, ARM nor
ARM64), the check in 8250_of.c must be weakened a bit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-ID: <20230609133932.786117-3-u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix issues identified in dytc_profile_refresh identified by lkp-tests.
drivers/platform/x86/thinkpad_acpi.c:10538
dytc_profile_refresh() error: uninitialized symbol 'funcmode'.
drivers/platform/x86/thinkpad_acpi.c:10531
dytc_profile_refresh() error: uninitialized symbol 'output'.
drivers/platform/x86/thinkpad_acpi.c:10537
dytc_profile_refresh() error: uninitialized symbol 'output'.
These issues should not lead to real problems in the field as the refresh
function should only be called if MMC or PSC mode enabled. But good to fix.
Thanks to Dan Carpenter and the lkp-tests project for flagging these.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202306011202.1hbgLRD4-lkp@intel.com/
Fixes: 1bc5d819f0b9 ("platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230606151804.8819-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The call site of nouveau_dsm_pci_probe() uses single set of output
variables for all invocations. So, we must not write anything to them
unless it's an NVIDIA device. Otherwise, if we are called with another
device after the NVIDIA device, we'll clober the result of the NVIDIA
device.
For example, if the other device doesn't have _PR3 resources, the
detection later would miss the presence of power resource support, and
the rest of the code will keep using Optimus DSM, breaking power
management for that machine.
Also, because we're detecting NVIDIA's DSM, it doesn't make sense to run
this detection on a non-NVIDIA device anyway. Thus, check at the
beginning of the detection code if this is an NVIDIA card, and just
return if it isn't.
This, together with commit d22915d22ded ("drm/nouveau/devinit/tu102-:
wait for GFW_BOOT_PROGRESS == COMPLETED") developed independently and
landed earlier, fixes runtime power management of the NVIDIA card in
Lenovo Legion 5-15ARH05. Without this patch, the GPU resumption code
will "timeout", sometimes hanging userspace.
As a bonus, we'll also stop preventing _PR3 usage from the bridge for
unrelated devices, which is always nice, I guess.
Fixes: ccfc2d5cdb02 ("drm/nouveau: Use generic helper to check _PR3 presence")
Signed-off-by: Ratchanan Srirattanamet <peathot@hotmail.com>
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/79
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/DM6PR19MB2780805D4BE1E3F9B3AC96D0BC409@DM6PR19MB2780.namprd19.prod.outlook.com
|
