| Age | Commit message (Collapse) | Author |
|---|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-linus
Manivannan writes:
MHI Host
========
- Fix the MHI BAR mapping by passing BAR number to pcim_iomap_region() API
instead of BAR mask. This fixes a regression for Qualcomm MHI modems.
* tag 'mhi-fixes-for-v6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: fix MHI BAR mapping
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for 6.13 cycle.
The usual mixed back of fixes for ancient and recent bugs
A number of these were from an audit by Javier Carrasco of places
we may leak stack data via holes in structures passed to userspace that
were not explicitly zeroed. Very helpful effort after we found a similar
bug in review of new code.
This affected:
- dummy driver
- kionix,kmx61
- murrata,zpa2326
- rockchip,saradc
- rohm,bh1745
- veml,vcnl4035
- ti,ads1119
- ti,ads8688
- ti,tmp0006
Other fixes:
core,inkern
- Underflow fo reference count issue in error path of iio_channel_get_all()
for devices we haven't yet gotten.
tests
- Kconfig typo fix so it's possible to tell what test is being enabled.
- Check for allocation failures.
adi,ad4695
- Ensure timing requirement wrt to final clock edge vs next conversion
signal are met by adding an additional SPI transfer.
adi,ad7124
- Ensure channels are disabled at probe to avoid wrong data if channel 0
is not the first one read.
adi,ad7173
- Fix handing of multiple devices by not editing a single static
structure and instead making a per instance copy.
adi,ad9467
- Fix handing of multiple devices by not editing a single static
structure and instead making a per instance copy.
adi,ad9832
- Off by one error on input verification for phase control
adi,ad9834
- Off by one error on input verification for phase control.
atmel,at91
- In an error path don't use a variable that hasn't been initialized yet.
invensense,icm42600
- SPI burst write does not work for some icm426000 chips, disable it.
- Ensure correct handling of timestamps after resume.
st,sensors
- Add back accidentally dropped IIS2MDC compatible in binding doc.
st,stm32-dfsdm:
- label property was accidentally made a required property. Make it optional
again to fix use of older DT.
ti,ads1119
- Use a fixed size for the channel data rather than an integer, bringing
the code inline with the advertised 16 bit channel size and avoiding
userspace misinterpreting the data.
ti,ads124s08
- Use _cansleep gpio calls as no reason to prevent sleeping and it
was stopping a new board design working (trivial fix).
ti,ads1298
- Add a check on failure of devm_kasprintf()
* tag 'iio-fixes-for-6.13a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits)
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
dt-bindings: iio: st-sensors: Re-add IIS2MDC magnetometer
iio: adc: ti-ads1298: Add NULL check in ads1298_init
iio: adc: stm32-dfsdm: handle label as an optional property
iio: adc: ad4695: fix buffered read, single sample timings
...
|
|
Driver currently populates subsystem_device id in the
"hw_ver" field of ib_attr structure in query_device.
Updated to populate PCI revision ID.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Reviewed-by: Preethi G <preethi.gurusiddalingeswaraswamy@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-6-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Current driver implementation doesn't populate the port_num
field in query_qp. Adding the code to convert internal firmware
port id to ibv defined port number and export it.
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-5-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Firmware expects "min_rnr_timer" as a mandatory attribute in
MODIFY_QP command during the RTR-RTS transition. This needs
to be enforced by the driver which is missing while setting
bnxt_set_mandatory_attributes that sends these flags as part
of modify_qp optimization.
Fixes: 82c32d219272 ("RDMA/bnxt_re: Add support for optimized modify QP")
Reviewed-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-4-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When RDMA app configures path MTU, add a check in modify_qp verb
to make sure that it doesn't go beyond interface MTU. If this
check fails, driver will fail the modify_qp verb.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-3-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The check for 9060 condition should only be made for legacy chips.
Fixes: 9152e0b722b2 ("RDMA/bnxt_re: HW workarounds for handling specific conditions")
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-2-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce the description of a hwtstamp provider, mainly defined with a
the hwtstamp source and the phydev pointer.
Add a hwtstamp provider description within the netdev structure to
allow saving the hwtstamp we want to use. This prepares for future
support of an ethtool netlink command to select the desired hwtstamp
provider. By default, the old API that does not support hwtstamp
selectability is used, meaning the hwtstamp provider pointer is unset.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a
RISCV platform which does not provide PCI/MSI support:
WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32
__pci_enable_msix_range+0x30c/0x596
pci_msi_setup_msi_irqs+0x2c/0x32
pci_alloc_irq_vectors_affinity+0xb8/0xe2
RISCV uses hierarchical interrupt domains and correctly does not implement
the legacy fallback. The warning triggers from the legacy fallback stub.
That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent
domain is associated with the device or not. There is a check for MSI-X,
which has a legacy assumption. But that legacy fallback assumption is only
valid when legacy support is enabled, but otherwise the check should simply
return -ENOTSUPP.
Loongarch tripped over the same problem and blindly enabled legacy support
without implementing the legacy fallbacks. There are weak implementations
which return an error, so the problem was papered over.
Correct pci_msi_domain_supports() to evaluate the legacy mode and add
the missing supported check into the MSI enable path to complete it.
Fixes: d2a463b29741 ("PCI/MSI: Reject multi-MSI early")
Reported-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ed2a8ow5.ffs@tglx
|
|
When USB-C monitor is connected directly to Intel Barlow Ridge host, it
goes into "redrive" mode that basically routes the DisplayPort signals
directly from the GPU to the USB-C monitor without any tunneling needed.
However, the host router must be powered on for this to work. Aaron
reported that there are a couple of cases where this will not work with
the current code:
- Booting with USB-C monitor plugged in.
- Plugging in USB-C monitor when the host router is in sleep state
(runtime suspended).
- Plugging in USB-C device while the system is in system sleep state.
In all these cases once the host router is runtime suspended the picture
on the connected USB-C display disappears too. This is certainly not
what the user expected.
For this reason improve the redrive mode handling to keep the host
router from runtime suspending when detect that any of the above cases
is happening.
Fixes: a75e0684efe5 ("thunderbolt: Keep the domain powered when USB4 port is in redrive mode")
Reported-by: Aaron Rainbolt <arainbolt@kfocus.org>
Closes: https://lore.kernel.org/linux-usb/20241009220118.70bfedd0@kf-ir16/
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Limit EFI zboot to GZIP and ZSTD before it comes in wider use
- Fix inconsistent error when looking up a non-existent file in
efivarfs with a name that does not adhere to the NAME-GUID format
- Drop some unused code
* tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/esrt: remove esre_attribute::store()
efivarfs: Fix error on non-existent file
efi/zboot: Limit compression options to GZIP and ZSTD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"i2c host fixes: PNX used the wrong unit for timeouts, Nomadik was
missing a sentinel, and RIIC was missing rounding up"
* tag 'i2c-for-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: riic: Always round-up when calculating bus period
i2c: nomadik: Add missing sentinel to match table
i2c: pnx: Fix timeout in wait functions
|
|
The existing linked list based implementation of how ts tags are
assigned and managed is unsafe against concurrency and corner cases:
- element addition in tx processing can race against element removal
in ts queue completion,
- element removal in ts queue completion can race against element
removal in device close,
- if a large number of frames gets added to tx queue without ts queue
completions in between, elements with duplicate tag values can get
added.
Use a different implementation, based on per-port used tags bitmaps and
saved skb arrays.
Safety for addition in tx processing vs removal in ts completion is
provided by:
tag = find_first_zero_bit(...);
smp_mb();
<write rdev->ts_skb[tag]>
set_bit(...);
vs
<read rdev->ts_skb[tag]>
smp_mb();
clear_bit(...);
Safety for removal in ts completion vs removal in device close is
provided by using atomic read-and-clear for rdev->ts_skb[tag]:
ts_skb = xchg(&rdev->ts_skb[tag], NULL);
if (ts_skb)
<handle it>
Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://patch.msgid.link/20241212062558.436455-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some calls into ionic_get_module_eeprom() don't use a single
full buffer size, but instead multiple calls with an offset.
Teach our driver to use the offset correctly so we can
respond appropriately to the caller.
Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are some FW error handling paths that can cause us to
try to destroy the workqueue more than once, so let's be sure
we're checking for that.
The case where this popped up was in an AER event where the
handlers got called in such a way that ionic_reset_prepare()
and thus ionic_dev_teardown() got called twice in a row.
The second time through the workqueue was already destroyed,
and destroy_workqueue() choked on the bad wq pointer.
We didn't hit this in AER handler testing before because at
that time we weren't using a private workqueue. Later we
replaced the use of the system workqueue with our own private
workqueue but hadn't rerun the AER handler testing since then.
Fixes: 9e25450da700 ("ionic: add private workqueue per-device")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If register_netdev() fails, then the driver leaks the netdev notifier.
Fix this by calling ionic_lif_unregister() on register_netdev()
failure. This will also call ionic_lif_unregister_phc() if it has
already been registered.
Fixes: 30b87ab4c0b3 ("ionic: remove lif list concept")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify framer_provider_simple_of_xlate() implementation by API
class_find_device_by_of_node().
Also correct comments to mark its parameter @dev as unused instead of
@args in passing.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241213-net_fix-v2-1-6d06130d630f@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@@ constant C; @@
- msecs_to_jiffies(C * 1000)
+ secs_to_jiffies(C)
@@ constant C; @@
- msecs_to_jiffies(C * MSEC_PER_SEC)
+ secs_to_jiffies(C)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Link: https://patch.msgid.link/20241212-netdev-converge-secs-to-jiffies-v4-1-6dac97a6d6ab@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When DCB is disabled, the pfc_en struct member cannot be accessed:
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c: In function 'otx2_is_pfc_enabled':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c:22:48: error: 'struct otx2_nic' has no member named 'pfc_en'
22 | return IS_ENABLED(CONFIG_DCB) && !!pfvf->pfc_en;
| ^~
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c: In function 'otx2_nix_config_bp':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c:1755:33: error: 'IEEE_8021QAZ_MAX_TCS' undeclared (first use in this function)
1755 | req->chan_cnt = IEEE_8021QAZ_MAX_TCS;
| ^~~~~~~~~~~~~~~~~~~~
Move the member out of the #ifdef block to avoid putting back another
check in the source file and add the missing include file unconditionally.
Fixes: a7ef63dbd588 ("octeontx2-af: Disable backpressure between CPT and NIX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241213083228.2645757-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the empty and unused nb_work and associated
ionic_lif_notify_work() function.
v2: separated from previous net patch
Link: https://lore.kernel.org/netdev/20241210174828.69525-2-shannon.nelson@amd.com/
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241212212042.9348-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit aa58bec064ab1622 ("net: ethernet: oa_tc6: implement register
write operation") introduced a library that implements the OPEN Alliance
TC6 10BASE-T1x MAC-PHY Serial Interface protocol for supporting
10BASE-T1x MAC-PHYs.
There is no need to ask the user about enabling this library, as all
drivers that use it select the OA_TC6 symbol. Hence make the symbol
invisible, unless when compile-testing.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/3b600550745af10ab7d7c3526353931c1d39f641.1733994552.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PHY driver
It seems that phylink does not support driving PHYs in SFP modules using
the Generic PHY or Generic Clause 45 PHY driver. I've come to this
conclusion after analyzing these facts:
- sfp_sm_probe_phy(), who is our caller here, first calls
phy_device_register() and then sfp_add_phy() -> ... ->
phylink_sfp_connect_phy().
- phydev->supported is populated by phy_probe()
- phy_probe() is usually called synchronously from phy_device_register()
via phy_bus_match(), if a precise device driver is found for the PHY.
In that case, phydev->supported has a good chance of being set to a
non-zero mask.
- There is an exceptional case for the PHYs for which phy_bus_match()
didn't find a driver. Those devices sit for a while without a driver,
then phy_attach_direct() force-binds the genphy_c45_driver or
genphy_driver to them. Again, this triggers phy_probe() and renders
a good chance of phydev->supported being populated, assuming
compatibility with genphy_read_abilities() or
genphy_c45_pma_read_abilities().
- phylink_sfp_config_phy() does not support the exceptional case of
retrieving phydev->supported from the Generic PHY driver, due to its
code flow. It expects the phydev->supported mask to already be
non-empty, because it first calls phylink_validate() on it, and only
calls phylink_attach_phy() if that succeeds. Thus, phylink_attach_phy()
-> phy_attach_direct() has no chance of running.
It is not my wish to change the state of affairs by altering the code
flow, but merely to document the limitation rather than have the current
unspecific error:
[ 61.800079] mv88e6085 d0032004.mdio-mii:12 sfp: validation with support 00,00000000,00000000,00000000 failed: -EINVAL
[ 61.820743] sfp sfp: sfp_add_phy failed: -EINVAL
On the premise that an empty phydev->supported is going to make
phylink_validate() fail anyway, and that this is caused by a missing PHY
driver, it would be more informative to single out that case, undercut
the entire phylink_sfp_config_phy() call, including phylink_validate(),
and print a more specific message for this common gotcha:
[ 37.076403] mv88e6085 d0032004.mdio-mii:12 sfp: PHY i2c:sfp:16 (id 0x01410cc2) has no driver loaded
[ 37.089157] mv88e6085 d0032004.mdio-mii:12 sfp: Drivers which handle known common cases: CONFIG_BCM84881_PHY, CONFIG_MARVELL_PHY
[ 37.108047] sfp sfp: sfp_add_phy failed: -EINVAL
Link: https://lore.kernel.org/netdev/20241113144229.3ff4bgsalvj7spb7@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20241212140834.278894-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The assignment was accidentally aligned to the string one line before.
This was raised by the kernel bot.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412101739.umNl7yYu-lkp@intel.com/
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241212115910.2485851-1-shayagr@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If either a zero count or a large one is provided, kernel can crash.
Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters")
Reported-by: syzbot+ea40e4294e58b0292f74@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/675c6862.050a0220.37aaf.00b1.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213172518.2415666-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Packets injected by the CPU should have a SRC_PORT field equal to the
CPU port module index in the Analyzer block (ocelot->num_phys_ports).
The blamed commit copied the ocelot_ifh_set_basic() call incorrectly
from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling
with "x", it calls with BIT_ULL(x), but the field is not a port mask,
but rather a single port index.
[ side note: this is the technical debt of code duplication :( ]
The error used to be silent and doesn't appear to have other
user-visible manifestations, but with new changes in the packing
library, it now fails loudly as follows:
------------[ cut here ]------------
Cannot store 0x40 inside bits 46-43 - will truncate
sja1105 spi2.0: xmit timed out
WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198
sja1105 spi2.0: timed out polling for tstamp
CPU: 1 UID: 0 PID: 102 Comm: felix_xmit
Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605
Call trace:
__pack+0x90/0x198 (P)
__pack+0x90/0x198 (L)
packing+0x78/0x98
ocelot_ifh_set_basic+0x260/0x368
ocelot_port_inject_frame+0xa8/0x250
felix_port_deferred_xmit+0x14c/0x258
kthread_worker_fn+0x134/0x350
kthread+0x114/0x138
The code path pertains to the ocelot switchdev driver and to the felix
secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q.
The messenger (packing) is not really to blame, so fix the original
commit instead.
Fixes: e1b9e80236c5 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GPIO2 pin on the DP83822 can be configured as clock output. Add support
for configuration via DT.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Make sure amd64_edac loads successfully on certain Zen4 memory
configurations
* tag 'edac_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Simplify ECC check on unified memory controllers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Disable the secure programming interface of the GIC500 chip in the
RK3399 SoC to fix interrupt priority assignment and even make a dead
machine boot again when the gic-v3 driver enables pseudo NMIs
- Correct the declaration of a percpu variable to fix several sparse
warnings
* tag 'irq_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Work around insecure GIC integrations
irqchip/gic: Correct declaration of *percpu_base pointer in union gic_base
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Single one-line fix in the ufs driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Update compl_time_stamp_local_clock after completing a cqe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues.
Included in here are:
- typec driver bugfixes
- u_serial gadget driver bugfix for much reported and discussed issue
- dwc2 bugfixes
- midi gadget driver bugfix
- ehci-hcd driver bugfix
- other small bugfixes
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix connector status writing past buffer size
usb: typec: ucsi: Fix completion notifications
usb: dwc2: Fix HCD port connection race
usb: dwc2: hcd: Fix GetPortStatus & SetPortFeature
usb: dwc2: Fix HCD resume
usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer
usb: misc: onboard_usb_dev: skip suspend/resume sequence for USB5744 SMBus support
usb: dwc3: xilinx: make sure pipe clock is deselected in usb2 only mode
usb: core: hcd: only check primary hcd skip_phy_initialization
usb: gadget: midi2: Fix interpretation of is_midi1 bits
usb: dwc3: imx8mp: fix software node kernel dump
usb: typec: anx7411: fix OF node reference leaks in anx7411_typec_switch_probe()
usb: typec: anx7411: fix fwnode_handle reference leak
usb: host: max3421-hcd: Correctly abort a USB request.
dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml
usb: ehci-hcd: fix call balance of clocks handling routines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two small serial driver fixes for 6.13-rc3. They are:
- ioport build fallout fix for the 8250 port driver that should
resolve Guenter's runtime problems
- sh-sci driver bugfix for a reported problem
Both of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: Work around warning backtrace in serial8250_set_defaults
serial: sh-sci: Check if TX data was written to device in .tx_empty()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging gpib driver build and bugfixes for issues
that have been much-reported (should finally fix Guenter's build
issues). There are more of these coming in later -rc releases, but for
now this should fix the majority of the reported problems.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix i386 build issue
staging: gpib: Fix faulty workaround for assignment in if
staging: gpib: Workaround for ppc build failure
staging: gpib: Make GPIB_NI_PCI_ISA depend on HAS_IOPORT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a regression in rsassa-pkcs1 as well as a buffer overrun in
hisilicon/debugfs"
* tag 'v6.13-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hisilicon/debugfs - fix the struct pointer incorrectly offset problem
crypto: rsassa-pkcs1 - Copy source data for SG list
|
|
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Set bindgen's Rust target version to prevent issues when
pairing older rustc releases with newer bindgen releases,
such as bindgen >= 0.71.0 and rustc < 1.82 due to
unsafe_extern_blocks.
drm/panic:
- Remove spurious empty line detected by a new Clippy warning"
* tag 'rust-fixes-6.13' of https://github.com/Rust-for-Linux/linux:
rust: kbuild: set `bindgen`'s Rust target version
drm/panic: remove spurious empty line to clean warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Per-domain device-list locking fixes for the AMD IOMMU driver
- Fix incorrect use of smp_processor_id() in the NVidia-specific part
of the ARM-SMMU-v3 driver
- Intel IOMMU driver fixes:
- Remove cache tags before disabling ATS
- Avoid draining PRQ in sva mm release path
- Fix qi_batch NULL pointer with nested parent domain
* tag 'iommu-fixes-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Avoid draining PRQ in sva mm release path
iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain
iommu/vt-d: Remove cache tags before disabling ATS
iommu/amd: Add lockdep asserts for domain->dev_list
iommu/amd: Put list_add/del(dev_data) back under the domain->lock
iommu/tegra241-cmdqv: do not use smp_processor_id in preemptible context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Fix an OF node reference leak in the sata_highbank driver
* tag 'ata-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_highbank: fix OF node reference leak in highbank_initialize_phys()
|
|
syzbot reported the following crash [1]
Issue came with the blamed commit. Instead of going through
all the iov components, we keep using the first one
and end up with a malformed skb.
[1]
kernel BUG at net/core/skbuff.c:2849 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 6230 Comm: syz-executor132 Not tainted 6.13.0-rc1-syzkaller-00407-g96b6fcc0ee41 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
RIP: 0010:__pskb_pull_tail+0x1568/0x1570 net/core/skbuff.c:2848
Code: 38 c1 0f 8c 32 f1 ff ff 4c 89 f7 e8 92 96 74 f8 e9 25 f1 ff ff e8 e8 ae 09 f8 48 8b 5c 24 08 e9 eb fb ff ff e8 d9 ae 09 f8 90 <0f> 0b 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc90004cbef30 EFLAGS: 00010293
RAX: ffffffff8995c347 RBX: 00000000fffffff2 RCX: ffff88802cf45a00
RDX: 0000000000000000 RSI: 00000000fffffff2 RDI: 0000000000000000
RBP: ffff88807df0c06a R08: ffffffff8995b084 R09: 1ffff1100fbe185c
R10: dffffc0000000000 R11: ffffed100fbe185d R12: ffff888076e85d50
R13: ffff888076e85c80 R14: ffff888076e85cf4 R15: ffff888076e85c80
FS: 00007f0dca6ea6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0dca6ead58 CR3: 00000000119da000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_cow_data+0x2da/0xcb0 net/core/skbuff.c:5284
tipc_aead_decrypt net/tipc/crypto.c:894 [inline]
tipc_crypto_rcv+0x402/0x24e0 net/tipc/crypto.c:1844
tipc_rcv+0x57e/0x12a0 net/tipc/node.c:2109
tipc_l2_rcv_msg+0x2bd/0x450 net/tipc/bearer.c:668
__netif_receive_skb_list_ptype net/core/dev.c:5720 [inline]
__netif_receive_skb_list_core+0x8b7/0x980 net/core/dev.c:5762
__netif_receive_skb_list net/core/dev.c:5814 [inline]
netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905
gro_normal_list include/net/gro.h:515 [inline]
napi_complete_done+0x2b5/0x870 net/core/dev.c:6256
napi_complete include/linux/netdevice.h:567 [inline]
tun_get_user+0x2ea0/0x4890 drivers/net/tun.c:1982
tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2057
do_iter_readv_writev+0x600/0x880
vfs_writev+0x376/0xba0 fs/read_write.c:1050
do_writev+0x1b6/0x360 fs/read_write.c:1096
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: de4f5fed3f23 ("iov_iter: add iter_iovec() helper")
Reported-by: syzbot+4f66250f6663c0c1d67e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/675b61aa.050a0220.599f4.00bb.GAE@google.com/T/#u
Cc: stable@vger.kernel.org
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20241212222247.724674-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dwmac510_tc_ops and dwxgmac_tc_ops are completely identical,
keep dwmac510_tc_ops to provide better backward compatibility.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20241212033325.282817-1-0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fairly small fixes for v6.13, the most substatial one being
disabling STIG mode for Cadence QSPI controllers on Altera SoCFPGA
platforms since it doesn't work"
* tag 'spi-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-cadence-qspi: Disable STIG mode for Altera SoCFPGA.
spi: rockchip: Fix PM runtime count on no-op cs
spi: aspeed: Fix an error handling path in aspeed_spi_[read|write]_user()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of additional changes, one ensuring we give AXP717 enough
time to stabilise after changing voltages which fixes serious
stability issues on some platforms and another documenting the DT
support required for the Qualcomm WCN6750"
* tag 'regulator-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: axp20x: AXP717: set ramp_delay
regulator: dt-bindings: qcom,qca6390-pmu: document wcn6750-pmu
|
|
Pull drm fixes from Dave Airlie:
"This is the weekly fixes pull for drm. Just has i915, xe and amdgpu
changes in it. Nothing too major in here:
i915:
- Don't use indexed register writes needlessly [dsb]
- Stop using non-posted DSB writes for legacy LUT [color]
- Fix NULL pointer dereference in capture_engine
- Fix memory leak by correcting cache object name in error handler
xe:
- Fix a KUNIT test error message (Mirsad Todorovac)
- Fix an invalidation fence PM ref leak (Daniele)
- Fix a register pool UAF (Lucas)
amdgpu:
- ISP hw init fix
- SR-IOV fixes
- Fix contiguous VRAM mapping for UVD on older GPUs
- Fix some regressions due to drm scheduler changes
- Workload profile fixes
- Cleaner shader fix
amdkfd:
- Fix DMA map direction for migration
- Fix a potential null pointer dereference
- Cacheline size fixes
- Runtime PM fix"
* tag 'drm-fixes-2024-12-14' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/reg_sr: Remove register pool
drm/xe: Call invalidation_fence_fini for PT inval fences in error state
drm/xe: fix the ERR_PTR() returned on failure to allocate tiny pt
drm/amdkfd: pause autosuspend when creating pdd
drm/amdgpu: fix when the cleaner shader is emitted
drm/amdgpu: Fix ISP HW init issue
drm/amdkfd: hard-code MALL cacheline size for gfx11, gfx12
drm/amdkfd: hard-code cacheline size for gfx11
drm/amdkfd: Dereference null return value
drm/i915: Fix memory leak by correcting cache object name in error handler
drm/i915: Fix NULL pointer dereference in capture_engine
drm/i915/color: Stop using non-posted DSB writes for legacy LUT
drm/i915/dsb: Don't use indexed register writes needlessly
drm/amdkfd: Correct the migration DMA map direction
drm/amd/pm: Set SMU v13.0.7 default workload type
drm/amd/pm: Initialize power profile mode
amdgpu/uvd: get ring reference from rq scheduler
drm/amdgpu: fix UVD contiguous CS mapping problem
drm/amdgpu: use sjt mec fw on gfx943 for sriov
Revert "drm/amdgpu: Fix ISP hw init issue"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two coding mistakes, one in the ACPI resources handling code
and one in ACPICA:
- Relocate the addr->info.mem.caching check in acpi_decode_space() to
only execute it if the resource is of the correct type (Ilpo
Järvinen)
- Don't release a context_mutex that was never acquired in
acpi_remove_address_space_handler() (Daniil Tatianin)"
* tag 'acpi-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: events/evxfregn: don't release the ContextMutex that was never acquired
ACPI: resource: Fix memory resource type union access
|
|
Pull block fixes from Jens Axboe:
- Series from Damien fixing issues with the zoned write plugging
- Fix for a potential UAF in block cgroups
- Fix deadlock around queue freezing and the sysfs lock
- Various little cleanups and fixes
* tag 'block-6.13-20241213' of git://git.kernel.dk/linux:
block: Fix potential deadlock while freezing queue and acquiring sysfs_lock
block: Fix queue_iostats_passthrough_show()
blk-mq: Clean up blk_mq_requeue_work()
mq-deadline: Remove a local variable
blk-iocost: Avoid using clamp() on inuse in __propagate_weights()
block: Make bio_iov_bvec_set() accept pointer to const iov_iter
block: get wp_offset by bdev_offset_from_zone_start
blk-cgroup: Fix UAF in blkcg_unpin_online()
MAINTAINERS: update Coly Li's email address
block: Prevent potential deadlocks in zone write plug error recovery
dm: Fix dm-zoned-reclaim zone write pointer alignment
block: Ignore REQ_NOWAIT for zone reset and zone finish operations
block: Use a zone write plug BIO work for REQ_NOWAIT BIOs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Ira Weiny:
- sysbot fix for out of bounds access
* tag 'libnvdimm-fixes-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi: nfit: vmalloc-out-of-bounds Read in acpi_nfit_ctl
|
|
drm_mode_vrefresh() is trying to avoid divide by zero
by checking whether htotal or vtotal are zero. But we may
still end up with a div-by-zero of vtotal*htotal*...
Cc: stable@vger.kernel.org
Reported-by: syzbot+622bba18029bcde672e1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=622bba18029bcde672e1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129042629.18280-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Merge an ACPICA fix for 6.13-rc3:
- Don't release a context_mutex that was never acquired in
acpi_remove_address_space_handler() (Daniil Tatianin).
* acpica:
ACPICA: events/evxfregn: don't release the ContextMutex that was never acquired
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix several low-level issues in gpio-graniterapids
- fix an initialization order issue that manifests itself with
__counted_by() checks in gpio-ljca
- don't default to y for CONFIG_GPIO_MVEBU with COMPILE_TEST enabled
- move the DEFAULT_SYMBOL_NAMESPACE define before the export.h include
in gpio-idio-16
* tag 'gpio-fixes-for-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: idio-16: Actually make use of the GPIO_IDIO_16 symbol namespace
gpio: graniterapids: Fix GPIO Ack functionality
gpio: graniterapids: Check if GPIO line can be used for IRQs
gpio: graniterapids: Determine if GPIO pad can be used by driver
gpio: graniterapids: Fix invalid RXEVCFG register bitmask
gpio: graniterapids: Fix invalid GPI_IS register offset
gpio: graniterapids: Fix incorrect BAR assignment
gpio: graniterapids: Fix vGPIO driver crash
gpio: ljca: Initialize num before accessing item in ljca_gpio_config
gpio: GPIO_MVEBU should not default to y when compile-testing
|
|
It appears that the relatively popular RK3399 SoC has been put together
using a large amount of illicit substances, as experiments reveal that its
integration of GIC500 exposes the *secure* programming interface to
non-secure.
This has some pretty bad effects on the way priorities are handled, and
results in a dead machine if booting with pseudo-NMI enabled
(irqchip.gicv3_pseudo_nmi=1) if the kernel contains 18fdb6348c480 ("arm64:
irqchip/gic-v3: Select priorities at boot time"), which relies on the
priorities being programmed using the NS view.
Let's restore some sanity by going one step further and disable security
altogether in this case. This is not any worse, and puts us in a mode where
priorities actually make some sense.
Huge thanks to Mark Kettenis who initially identified this issue on
OpenBSD, and to Chen-Yu Tsai who reported the problem in Linux.
Fixes: 18fdb6348c480 ("arm64: irqchip/gic-v3: Select priorities at boot time")
Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Reported-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241213141037.3995049-1-maz@kernel.org
|
|
percpu_base is used in various percpu functions that expect variable in
__percpu address space. Correct the declaration of percpu_base to
void __iomem * __percpu *percpu_base;
to declare the variable as __percpu pointer.
The patch fixes several sparse warnings:
irq-gic.c:1172:44: warning: incorrect type in assignment (different address spaces)
irq-gic.c:1172:44: expected void [noderef] __percpu *[noderef] __iomem *percpu_base
irq-gic.c:1172:44: got void [noderef] __iomem *[noderef] __percpu *
...
irq-gic.c:1231:43: warning: incorrect type in argument 1 (different address spaces)
irq-gic.c:1231:43: expected void [noderef] __percpu *__pdata
irq-gic.c:1231:43: got void [noderef] __percpu *[noderef] __iomem *percpu_base
There were no changes in the resulting object files.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20241213145809.2918-2-ubizjak@gmail.com
|
|
Instead of returning a generic NULL on error from
drm_dp_tunnel_mgr_create(), use error pointers with informative codes
to align the function with stub that is executed when
CONFIG_DRM_DISPLAY_DP_TUNNEL is unset. This will also trigger IS_ERR()
in current caller (intel_dp_tunnerl_mgr_init()) instead of bypassing it
via NULL pointer.
v2: use error codes inside drm_dp_tunnel_mgr_create() instead of handling
on caller's side (Michal, Imre)
v3: fixup commit message and add "CC"/"Fixes" lines (Andi),
mention aligning function code with stub
Fixes: 91888b5b1ad2 ("drm/i915/dp: Add support for DP tunnel BW allocation")
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7q4fpnmmztmchczjewgm6igy55qt6jsm7tfd4fl4ucfq6yg2oy@q4lxtsu6445c
|
