summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-10Merge tag 'usb-serial-6.13-rc7' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device ids for 6.13-rc7 Here are some new modem and cp210x device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-6.13-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Neoway N723-EA support USB: serial: option: add MeiG Smart SRM815 USB: serial: cp210x: add Phoenix Contact UPS Device
2025-01-10wifi: brcmfmac: Add missing Return: to function documentationJeff Johnson
Running 'scripts/kernel-doc -Wall -Werror -none' flagged the following kernel-doc issues: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:823: warning: No description found for return value of 'brcmf_apsta_add_vif' drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:907: warning: No description found for return value of 'brcmf_mon_add_vif' drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7419: warning: No description found for return value of 'brcmf_setup_ifmodes' Add the missing 'Return:' tags to the kernel-doc of these functions. Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20250106-brcmfmac-kdoc-v1-1-ed72196e21a1@oss.qualcomm.com
2025-01-10wifi: iwlegacy: Remove unused il_get_single_channel_number()Dr. David Alan Gilbert
THe last use of il_get_single_channel_number() was removed in 2011 by commit dd6d2a8aef69 ("iwlegacy: remove reset rf infrastructure") when it was still called iwl_legacy_get_single_channel_number. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241226011355.135417-3-linux@treblig.org
2025-01-10wifi: iwlegacy: Remove unused il3945_calc_db_from_ratio()Dr. David Alan Gilbert
The last use of il3945_calc_db_from_ratio() was removed in 2010 by commit ed1b6e99b5e6 ("iwlwifi: remove noise reporting") when it was still called iwl3945_calc_db_from_ratio(). Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241226011355.135417-2-linux@treblig.org
2025-01-10wifi: rt2x00: Remove unused rfval valuesAriel Otilibili
The intention here is not clear but as this was already tested and matches vendor driver it's better not to change behavior even if it looks suspicious. So just remove the unused values. Coverity-ID: 1525307 Signed-off-by: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> [kvalo@kernel.org: write commit message] Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241221124445.1094460-2-ariel.otilibili-anieli@eurecom.fr
2025-01-10wifi: brcmfmac: Check the return value of of_property_read_string_index()Stefan Dösinger
Somewhen between 6.10 and 6.11 the driver started to crash on my MacBookPro14,3. The property doesn't exist and 'tmp' remains uninitialized, so we pass a random pointer to devm_kstrdup(). The crash I am getting looks like this: BUG: unable to handle page fault for address: 00007f033c669379 PF: supervisor read access in kernel mode PF: error_code(0x0001) - permissions violation PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025 Oops: Oops: 0001 [#1] SMP PTI CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1 Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024 RIP: 0010:strlen+0x4/0x30 Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202 RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001 RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379 RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8 R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30 FS: 00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x149/0x4c0 ? raw_spin_rq_lock_nested+0xe/0x20 ? sched_balance_newidle+0x22b/0x3c0 ? update_load_avg+0x78/0x770 ? exc_page_fault+0x6f/0x150 ? asm_exc_page_fault+0x26/0x30 ? __pfx_pci_conf1_write+0x10/0x10 ? strlen+0x4/0x30 devm_kstrdup+0x25/0x70 brcmf_of_probe+0x273/0x350 [brcmfmac] Signed-off-by: Stefan Dösinger <stefan@codeweavers.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20250106170958.3595-1-stefan@codeweavers.com
2025-01-10wifi: wlcore: fix unbalanced pm_runtime callsAndreas Kemnade
If firmware boot failes, runtime pm is put too often: [12092.708099] wlcore: ERROR firmware boot failed despite 3 retries [12092.708099] wl18xx_driver wl18xx.1.auto: Runtime PM usage count underflow! Fix that by redirecting all error gotos before runtime_get so that runtime is not put. Fixes: c40aad28a3cf ("wlcore: Make sure firmware is initialized in wl1271_op_add_interface()") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Michael Nemanov <michael.nemanov@ti.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20250104195507.402673-1-akemnade@kernel.org
2025-01-10wifi: wilc1000: unregister wiphy only if it has been registeredAlexis Lothoré
There is a specific error path in probe functions in wilc drivers (both sdio and spi) which can lead to kernel panic, as this one for example when using SPI: Unable to handle kernel paging request at virtual address 9f000000 when read [9f000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: wilc1000_spi(+) crc_itu_t crc7 wilc1000 cfg80211 bluetooth ecdh_generic ecc CPU: 0 UID: 0 PID: 106 Comm: modprobe Not tainted 6.13.0-rc3+ #22 Hardware name: Atmel SAMA5 PC is at wiphy_unregister+0x244/0xc40 [cfg80211] LR is at wiphy_unregister+0x1c0/0xc40 [cfg80211] [...] wiphy_unregister [cfg80211] from wilc_netdev_cleanup+0x380/0x494 [wilc1000] wilc_netdev_cleanup [wilc1000] from wilc_bus_probe+0x360/0x834 [wilc1000_spi] wilc_bus_probe [wilc1000_spi] from spi_probe+0x15c/0x1d4 spi_probe from really_probe+0x270/0xb2c really_probe from __driver_probe_device+0x1dc/0x4e8 __driver_probe_device from driver_probe_device+0x5c/0x140 driver_probe_device from __driver_attach+0x220/0x540 __driver_attach from bus_for_each_dev+0x13c/0x1a8 bus_for_each_dev from bus_add_driver+0x2a0/0x6a4 bus_add_driver from driver_register+0x27c/0x51c driver_register from do_one_initcall+0xf8/0x564 do_one_initcall from do_init_module+0x2e4/0x82c do_init_module from load_module+0x59a0/0x70c4 load_module from init_module_from_file+0x100/0x148 init_module_from_file from sys_finit_module+0x2fc/0x924 sys_finit_module from ret_fast_syscall+0x0/0x1c The issue can easily be reproduced, for example by not wiring correctly a wilc device through SPI (and so, make it unresponsive to early SPI commands). It is due to a recent change decoupling wiphy allocation from wiphy registration, however wilc_netdev_cleanup has not been updated accordingly, letting it possibly call wiphy unregister on a wiphy which has never been registered. Fix this crash by moving wiphy_unregister/wiphy_free out of wilc_netdev_cleanup, and by adjusting error paths in both drivers Fixes: fbdf0c5248dc ("wifi: wilc1000: Register wiphy after reading out chipid") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241223-wilc_fix_probe_error_path-v1-1-91fa7bd8e5b6@bootlin.com
2025-01-10wifi: mt76: mt7996: fix invalid interface combinationsShayne Chen
Setting beacon_int_min_gcd and NL80211_IFTYPE_ADHOC in the same interface combination is invalid, which will trigger the following warning trace and get error returned from wiphy_register(). [ 10.080325] Call trace: [ 10.082761] wiphy_register+0xc4/0x76c [cfg80211] [ 10.087465] ieee80211_register_hw+0x800/0xac4 [mac80211] [ 10.092868] mt76_register_device+0x16c/0x2c0 [mt76] [ 10.097829] mt7996_register_device+0x740/0x844 [mt7996e] Fix this by removing unused adhoc iftype. Fixes: 948f65249868 ("wifi: mt76: mt7996: advertize beacon_int_min_gcd") Reported-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Tested-By: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241007135133.5336-1-shayne.chen@mediatek.com
2025-01-10can: kvaser_pciefd: Add support for CAN_CTRLMODE_BERR_REPORTINGJimmy Assarsson
Add support for CAN_CTRLMODE_BERR_REPORTING, allowing Bus Error Reporting to be enabled or disabled. Previously, Bus Error Reporting was always active. Co-developed-by: Alison Below <alisonbelow@gmail.com> Signed-off-by: Alison Below <alisonbelow@gmail.com> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20241230142645.128244-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-01-10can: kvaser_pciefd: Update stats and state even if alloc_can_err_skb() failsJimmy Assarsson
Ensure statistics, error counters, and CAN state are updated consistently, even when alloc_can_err_skb() fails during state changes or error message frame reception. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20241230142645.128244-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-01-10can: kvaser_usb: Add support for CAN_CTRLMODE_BERR_REPORTINGJimmy Assarsson
Add support for CAN_CTRLMODE_BERR_REPORTING, allowing Bus Error Reporting to be enabled or disabled. Previously, Bus Error Reporting was always active. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20241230142645.128244-2-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-01-10can: kvaser_usb: Update stats and state even if alloc_can_err_skb() failsJimmy Assarsson
Ensure statistics, error counters, and CAN state are updated consistently, even when alloc_can_err_skb() fails during state changes or error message frame reception. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20241230142645.128244-1-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-01-10can: m_can: call deinit/init callback when going into suspend/resumeSean Nyekjaer
m_can user like the tcan4x5x device, can go into standby mode. Low power RX mode is enabled to allow wake on can. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://patch.msgid.link/20241122-tcan-standby-v3-3-90bafaf5eccd@geanix.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-01-10can: tcan4x5x: add deinit callback to set standby modeSean Nyekjaer
At Vsup 12V, standby mode will save 7-8mA, when the interface is down. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://patch.msgid.link/20241122-tcan-standby-v3-2-90bafaf5eccd@geanix.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-01-10can: m_can: add deinit callbackSean Nyekjaer
This is added in preparation for calling standby mode in the tcan4x5x driver or other users of m_can. For the tcan4x5x; If Vsup 12V, standby mode will save 7-8mA, when the interface is down. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://patch.msgid.link/20241122-tcan-standby-v3-1-90bafaf5eccd@geanix.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-01-10Merge tag 'ipsec-next-2025-01-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== ipsec-next-2025-01-09 1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality. From Christian Hopps. 2) Support ESN context update to hardware for TX. From Jianbo Liu. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-10net: dsa: qca8k: Use of_property_present() for non-boolean propertiesRob Herring (Arm)
The use of of_property_read_bool() for non-boolean properties is deprecated in favor of of_property_present() when testing for property presence. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-10Merge tag 'mediatek-drm-fixes-20250104' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes - 20250104 1. Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing" 2. Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err 3. Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb() 4. Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported 5. Add support for 180-degree rotation in the display driver 6. Stop selecting foreign drivers 7. Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()" 8. Fix YCbCr422 color format issue for DP 9. Fix mode valid issue for dp 10. dp: Reference common DAI properties 11. dsi: Add registers to pdata to fix MT8186/MT8188 12. Remove unneeded semicolon 13. Add return value check when reading DPCD 14. Initialize pointer in mtk_drm_of_ddp_path_build_one() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250104124227.45505-1-chunkuang.hu@kernel.org
2025-01-10Merge tag 'drm-xe-fixes-2025-01-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Driver Changes: - Avoid a NULL ptr deref when wedging (Lucas) - Fix power gate sequence on DG1 (Rodrigo) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z4AcqP3Io_r0pEsR@fedora
2025-01-10Merge tag 'amd-drm-fixes-6.13-2025-01-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.13-2025-01-09: amdgpu: - Display interrupt fixes - Fix display max surface mismatches - Fix divide error in DM plane scale calcs - Display divide by 0 checks in dml helpers - SMU 13 AD/DC interrrupt handling fix - Fix locking around buddy trim handling amdkfd: - Fix page fault with shader debugger enabled - Fix eviction fence wq handling Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250109164236.477295-1-alexander.deucher@amd.com
2025-01-09net: phy: micrel: use helper phy_disable_eeeHeiner Kallweit
Use helper phy_disable_eee() instead of setting phylib-internal bitmap eee_broken_modes directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/5e19eebe-121e-4a41-b36d-a35631279dd8@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09netconsole: Warn if MAX_USERDATA_ITEMS limit is exceededBreno Leitao
netconsole configfs helpers doesn't allow the creation of more than MAX_USERDATA_ITEMS items. Add a warning when netconsole userdata update function attempts sees more than MAX_USERDATA_ITEMS entries. Replace silent ignore mechanism with WARN_ON_ONCE() to highlight potential misuse during development and debugging. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-1-3d85eb091bec@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()Sudheer Kumar Doredla
CPSW ALE has 75-bit ALE entries stored across three 32-bit words. The cpsw_ale_get_field() and cpsw_ale_set_field() functions support ALE field entries spanning up to two words at the most. The cpsw_ale_get_field() and cpsw_ale_set_field() functions work as expected when ALE field spanned across word1 and word2, but fails when ALE field spanned across word2 and word3. For example, while reading the ALE field spanned across word2 and word3 (i.e. bits 62 to 64), the word3 data shifted to an incorrect position due to the index becoming zero while flipping. The same issue occurred when setting an ALE entry. This issue has not been seen in practice but will be an issue in the future if the driver supports accessing ALE fields spanning word2 and word3 Fix the methods to handle getting/setting fields spanning up to two words. Fixes: b685f1a58956 ("net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()/cpsw_ale_set_field()") Signed-off-by: Sudheer Kumar Doredla <s-doredla@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://patch.msgid.link/20250108172433.311694-1-s-doredla@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS requestXiang Zhang
The ISCSI_UEVENT_GET_HOST_STATS request is already handled in iscsi_get_host_stats(). This fix ensures that redundant responses are skipped in iscsi_if_rx(). - On success: send reply and stats from iscsi_get_host_stats() within if_recv_msg(). - On error: fall through. Signed-off-by: Xiang Zhang <hawkxiang.cpp@gmail.com> Link: https://lore.kernel.org/r/20250107022432.65390-1-hawkxiang.cpp@gmail.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-09scsi: core: Fix command pass through retry regressionMike Christie
scsi_check_passthrough() is always called, but it doesn't check for if a command completed successfully. As a result, if a command was successful and the caller used SCMD_FAILURE_RESULT_ANY to indicate what failures it wanted to retry, we will end up retrying the command. This will cause delays during device discovery because of the command being sent multiple times. For some USB devices it can also cause the wrong device size to be used. This patch adds a check for if the command was successful. If it is we return immediately instead of trying to match a failure. Fixes: 994724e6b3f0 ("scsi: core: Allow passthrough to request midlayer retries") Reported-by: Kris Karas <bugs-a21@moonlit-rail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219652 Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20250107010220.7215-1-michael.christie@oracle.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc7). Conflicts: a42d71e322a8 ("net_sched: sch_cake: Add drop reasons") 737d4d91d35b ("sched: sch_cake: add bounds checks to host bulk flow fairness counts") Adjacent changes: drivers/net/ethernet/meta/fbnic/fbnic.h 3a856ab34726 ("eth: fbnic: add IRQ reuse support") 95978931d55f ("eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09Merge tag 'net-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, Bluetooth and WPAN. No outstanding fixes / investigations at this time. Current release - new code bugs: - eth: fbnic: revert HWMON support, it doesn't work at all and revert is similar size as the fixes Previous releases - regressions: - tcp: allow a connection when sk_max_ack_backlog is zero - tls: fix tls_sw_sendmsg error handling Previous releases - always broken: - netdev netlink family: - prevent accessing NAPI instances from another namespace - don't dump Tx and uninitialized NAPIs - net: sysctl: avoid using current->nsproxy, fix null-deref if task is exiting and stick to opener's netns - sched: sch_cake: add bounds checks to host bulk flow fairness counts Misc: - annual cleanup of inactive maintainers" * tag 'net-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) rds: sysctl: rds_tcp_{rcv,snd}buf: avoid using current->nsproxy sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy sctp: sysctl: udp_port: avoid using current->nsproxy sctp: sysctl: auth_enable: avoid using current->nsproxy sctp: sysctl: rto_min/max: avoid using current->nsproxy sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy mptcp: sysctl: blackhole timeout: avoid using current->nsproxy mptcp: sysctl: sched: avoid using current->nsproxy mptcp: sysctl: avail sched: remove write access MAINTAINERS: remove Lars Povlsen from Microchip Sparx5 SoC MAINTAINERS: remove Noam Dagan from AMAZON ETHERNET MAINTAINERS: remove Ying Xue from TIPC MAINTAINERS: remove Mark Lee from MediaTek Ethernet MAINTAINERS: mark stmmac ethernet as an Orphan MAINTAINERS: remove Andy Gospodarek from bonding MAINTAINERS: update maintainers for Microchip LAN78xx MAINTAINERS: mark Synopsys DW XPCS as Orphan net/mlx5: Fix variable not being completed when function returns rtase: Fix a check for error in rtase_alloc_msix() net: stmmac: dwmac-tegra: Read iommu stream id from device tree ...
2025-01-09enic: Fix typo in comment in table indexed by link speedJohn Daley
The RX adaptive interrupt moderation table is indexed by link speed range, where the last row of the table is the catch-all for all link speeds greater than 10Gbps. The comment said 10 - 40Gbps, but since there are now adapters with link speeds than 40Gbps, the comment is now wrong and should indicate it applies to all speeds greater than 10Gbps. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20250107214159.18807-4-johndale@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09enic: Obtain the Link speed only after the link comes upJohn Daley
The link speed is obtained in the RX adaptive coalescing function. It was being called at probe time when the link may not be up. Change the call to run after the Link comes up. The impact of not getting the correct link speed was that the low end of the adaptive interrupt range was always being set to 0 which could have caused a slight increase in the number of RX interrupts. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20250107214159.18807-3-johndale@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09enic: Move RX coalescing set functionJohn Daley
Move the function used for setting the RX coalescing range to before the function that checks the link status. It needs to be called from there instead of from the probe function. There is no functional change. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Link: https://patch.msgid.link/20250107214159.18807-2-johndale@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09Merge patch series "SBI PMU event related fixes"Palmer Dabbelt
Atish Patra <atishp@rivosinc.com> says: Here are two minor improvement/fixes in the PMU event path. The first patch was part of the series[1]. The 2nd patch was suggested during the series review. While the series can only be merged once SBI v3.0 is frozen, these two patches can be independent of SBI v3.0 and can be merged sooner. Hence, these two patches are sent as a separate series. * b4-shazam-merge: drivers/perf: riscv: Do not allow invalid raw event config drivers/perf: riscv: Return error for default case drivers/perf: riscv: Fix Platform firmware event data Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-0-813e8a4f5962@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-09drivers/perf: riscv: Do not allow invalid raw event configAtish Patra
The SBI specification allows only lower 48bits of hpmeventX to be configured via SBI PMU. Currently, the driver masks of the higher bits but doesn't return an error. This will lead to an additional SBI call for config matching which should return for an invalid event error in most of the cases. However, if a platform(i.e Rocket and sifive cores) implements a bitmap of all bits in the event encoding this will lead to an incorrect event being programmed leading to user confusion. Report the error to the user if higher bits are set during the event mapping itself to avoid the confusion and save an additional SBI call. Suggested-by: Samuel Holland <samuel.holland@sifive.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-3-813e8a4f5962@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-09drivers/perf: riscv: Return error for default caseAtish Patra
If the upper two bits has an invalid valid (0x1), the event mapping is not reliable as it returns an uninitialized variable. Return appropriate value for the default case. Fixes: f0c9363db2dd ("perf/riscv-sbi: Add platform specific firmware event handling") Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-2-813e8a4f5962@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-09drivers/perf: riscv: Fix Platform firmware event dataAtish Patra
Platform firmware event data field is allowed to be 62 bits for Linux as uppper most two bits are reserved to indicate SBI fw or platform specific firmware events. However, the event data field is masked as per the hardware raw event mask which is not correct. Fix the platform firmware event data field with proper mask. Fixes: f0c9363db2dd ("perf/riscv-sbi: Add platform specific firmware event handling") Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-1-813e8a4f5962@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-09net/mlx5: Fix variable not being completed when function returnsChenguang Zhao
When cmd_alloc_index(), fails cmd_work_handler() needs to complete ent->slotted before returning early. Otherwise the task which issued the command may hang: mlx5_core 0000:01:00.0: cmd_work_handler:877:(pid 3880418): failed to allocate command entry INFO: task kworker/13:2:4055883 blocked for more than 120 seconds. Not tainted 4.19.90-25.44.v2101.ky10.aarch64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/13:2 D 0 4055883 2 0x00000228 Workqueue: events mlx5e_tx_dim_work [mlx5_core] Call trace: __switch_to+0xe8/0x150 __schedule+0x2a8/0x9b8 schedule+0x2c/0x88 schedule_timeout+0x204/0x478 wait_for_common+0x154/0x250 wait_for_completion+0x28/0x38 cmd_exec+0x7a0/0xa00 [mlx5_core] mlx5_cmd_exec+0x54/0x80 [mlx5_core] mlx5_core_modify_cq+0x6c/0x80 [mlx5_core] mlx5_core_modify_cq_moderation+0xa0/0xb8 [mlx5_core] mlx5e_tx_dim_work+0x54/0x68 [mlx5_core] process_one_work+0x1b0/0x448 worker_thread+0x54/0x468 kthread+0x134/0x138 ret_from_fork+0x10/0x18 Fixes: 485d65e13571 ("net/mlx5: Add a timeout to acquire the command queue semaphore") Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250108030009.68520-1-zhaochenguang@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09rtase: Fix a check for error in rtase_alloc_msix()Dan Carpenter
The pci_irq_vector() function never returns zero. It returns negative error codes or a positive non-zero IRQ number. Fix the error checking to test for negatives. Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/f2ecc88d-af13-4651-9820-7cc665230019@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09net: stmmac: dwmac-tegra: Read iommu stream id from device treeParker Newman
Nvidia's Tegra MGBE controllers require the IOMMU "Stream ID" (SID) to be written to the MGBE_WRAP_AXI_ASID0_CTRL register. The current driver is hard coded to use MGBE0's SID for all controllers. This causes softirq time outs and kernel panics when using controllers other than MGBE0. Example dmesg errors when an ethernet cable is connected to MGBE1: [ 116.133290] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 121.851283] tegra-mgbe 6910000.ethernet eth1: NETDEV WATCHDOG: CPU: 5: transmit queue 0 timed out 5690 ms [ 121.851782] tegra-mgbe 6910000.ethernet eth1: Reset adapter. [ 121.892464] tegra-mgbe 6910000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 121.905920] tegra-mgbe 6910000.ethernet eth1: PHY [stmmac-1:00] driver [Aquantia AQR113] (irq=171) [ 121.907356] tegra-mgbe 6910000.ethernet eth1: Enabling Safety Features [ 121.907578] tegra-mgbe 6910000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [ 121.908399] tegra-mgbe 6910000.ethernet eth1: registered PTP clock [ 121.908582] tegra-mgbe 6910000.ethernet eth1: configuring for phy/10gbase-r link mode [ 125.961292] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 181.921198] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 181.921404] rcu: 7-....: (1 GPs behind) idle=540c/1/0x4000000000000002 softirq=1748/1749 fqs=2337 [ 181.921684] rcu: (detected by 4, t=6002 jiffies, g=1357, q=1254 ncpus=8) [ 181.921878] Sending NMI from CPU 4 to CPUs 7: [ 181.921886] NMI backtrace for cpu 7 [ 181.922131] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6 [ 181.922390] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024 [ 181.922658] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 181.922847] pc : handle_softirqs+0x98/0x368 [ 181.922978] lr : __do_softirq+0x18/0x20 [ 181.923095] sp : ffff80008003bf50 [ 181.923189] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000 [ 181.923379] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0 [ 181.924486] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70 [ 181.925568] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000 [ 181.926655] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000 [ 181.931455] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d [ 181.938628] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160 [ 181.945804] x8 : ffff8000827b3160 x7 : f9157b241586f343 x6 : eeb6502a01c81c74 [ 181.953068] x5 : a4acfcdd2e8096bb x4 : ffffce78ea277340 x3 : 00000000ffffd1e1 [ 181.960329] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000 [ 181.967591] Call trace: [ 181.970043] handle_softirqs+0x98/0x368 (P) [ 181.974240] __do_softirq+0x18/0x20 [ 181.977743] ____do_softirq+0x14/0x28 [ 181.981415] call_on_irq_stack+0x24/0x30 [ 181.985180] do_softirq_own_stack+0x20/0x30 [ 181.989379] __irq_exit_rcu+0x114/0x140 [ 181.993142] irq_exit_rcu+0x14/0x28 [ 181.996816] el1_interrupt+0x44/0xb8 [ 182.000316] el1h_64_irq_handler+0x14/0x20 [ 182.004343] el1h_64_irq+0x80/0x88 [ 182.007755] cpuidle_enter_state+0xc4/0x4a8 (P) [ 182.012305] cpuidle_enter+0x3c/0x58 [ 182.015980] cpuidle_idle_call+0x128/0x1c0 [ 182.020005] do_idle+0xe0/0xf0 [ 182.023155] cpu_startup_entry+0x3c/0x48 [ 182.026917] secondary_start_kernel+0xdc/0x120 [ 182.031379] __secondary_switched+0x74/0x78 [ 212.971162] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 7-.... } 6103 jiffies s: 417 root: 0x80/. [ 212.985935] rcu: blocking rcu_node structures (internal RCU debug): [ 212.992758] Sending NMI from CPU 0 to CPUs 7: [ 212.998539] NMI backtrace for cpu 7 [ 213.004304] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6 [ 213.016116] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024 [ 213.030817] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 213.040528] pc : handle_softirqs+0x98/0x368 [ 213.046563] lr : __do_softirq+0x18/0x20 [ 213.051293] sp : ffff80008003bf50 [ 213.055839] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000 [ 213.067304] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0 [ 213.077014] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70 [ 213.087339] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000 [ 213.097313] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000 [ 213.107201] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d [ 213.116651] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160 [ 213.127500] x8 : ffff8000827b3160 x7 : 0a37b344852820af x6 : 3f049caedd1ff608 [ 213.138002] x5 : cff7cfdbfaf31291 x4 : ffffce78ea277340 x3 : 00000000ffffde04 [ 213.150428] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000 [ 213.162063] Call trace: [ 213.165494] handle_softirqs+0x98/0x368 (P) [ 213.171256] __do_softirq+0x18/0x20 [ 213.177291] ____do_softirq+0x14/0x28 [ 213.182017] call_on_irq_stack+0x24/0x30 [ 213.186565] do_softirq_own_stack+0x20/0x30 [ 213.191815] __irq_exit_rcu+0x114/0x140 [ 213.196891] irq_exit_rcu+0x14/0x28 [ 213.202401] el1_interrupt+0x44/0xb8 [ 213.207741] el1h_64_irq_handler+0x14/0x20 [ 213.213519] el1h_64_irq+0x80/0x88 [ 213.217541] cpuidle_enter_state+0xc4/0x4a8 (P) [ 213.224364] cpuidle_enter+0x3c/0x58 [ 213.228653] cpuidle_idle_call+0x128/0x1c0 [ 213.233993] do_idle+0xe0/0xf0 [ 213.237928] cpu_startup_entry+0x3c/0x48 [ 213.243791] secondary_start_kernel+0xdc/0x120 [ 213.249830] __secondary_switched+0x74/0x78 This bug has existed since the dwmac-tegra driver was added in Dec 2022 (See Fixes tag below for commit hash). The Tegra234 SOC has 4 MGBE controllers, however Nvidia's Developer Kit only uses MGBE0 which is why the bug was not found previously. Connect Tech has many products that use 2 (or more) MGBE controllers. The solution is to read the controller's SID from the existing "iommus" device tree property. The 2nd field of the "iommus" device tree property is the controller's SID. Device tree snippet from tegra234.dtsi showing MGBE1's "iommus" property: smmu_niso0: iommu@12000000 { compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500"; ... } /* MGBE1 */ ethernet@6900000 { compatible = "nvidia,tegra234-mgbe"; ... iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>; ... } Nvidia's arm-smmu driver reads the "iommus" property and stores the SID in the MGBE device's "fwspec" struct. The dwmac-tegra driver can access the SID using the tegra_dev_iommu_get_stream_id() helper function found in linux/iommu.h. Calling tegra_dev_iommu_get_stream_id() should not fail unless the "iommus" property is removed from the device tree or the IOMMU is disabled. While the Tegra234 SOC technically supports bypassing the IOMMU, it is not supported by the current firmware, has not been tested and not recommended. More detailed discussion with Thierry Reding from Nvidia linked below. Fixes: d8ca113724e7 ("net: stmmac: tegra: Add MGBE support") Link: https://lore.kernel.org/netdev/cover.1731685185.git.pnewman@connecttech.com Signed-off-by: Parker Newman <pnewman@connecttech.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patch.msgid.link/6fb97f32cf4accb4f7cf92846f6b60064ba0a3bd.1736284360.git.pnewman@connecttech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09netdevsim: add debugfs-triggered queue resetJakub Kicinski
Support triggering queue reset via debugfs for an upcoming test. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09netdevsim: add queue management API supportJakub Kicinski
Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09netdevsim: add queue alloc/free helpersJakub Kicinski
We'll need the code to allocate and free queues in the queue management API, factor it out. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09netdevsim: allocate rqs individuallyJakub Kicinski
Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09netdevsim: support NAPI configJakub Kicinski
Link the NAPI instances to their configs. This will be needed to test that NAPI config doesn't break list ordering. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09net/mlx5: use do_aux_work for PHC overflow checksVadim Fedorenko
The overflow_work is using system wq to do overflow checks and updates for PHC device timecounter, which might be overhelmed by other tasks. But there is dedicated kthread in PTP subsystem designed for such things. This patch changes the work queue to proper align with PTP subsystem and to avoid overloading system work queue. The adjfine() function acts the same way as overflow check worker, we can postpone ptp aux worker till the next overflow period after adjfine() was called. Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250107104812.380225-1-vadfed@meta.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09net: stmmac: Unexport stmmac_rx_offset() from stmmac.hFurong Xu
stmmac_rx_offset() is referenced in stmmac_main.c only, let's move it to stmmac_main.c. Drop the inline keyword by the way, it is better to let the compiler to decide. Compile tested only. No functional change intended. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250107075448.4039925-1-0x1207@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09r8169: add support for RTL8125BP rev.bChunHao Lin
Add support for RTL8125BP rev.b. Its XID is 0x689. This chip supports DASH and its dash type is "RTL_DASH_25_BP". Signed-off-by: ChunHao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/20250107064355.104711-1-hau@realtek.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09mctp i3c: fix MCTP I3C driver multi-thread issueLeo Yang
We found a timeout problem with the pldm command on our system. The reason is that the MCTP-I3C driver has a race condition when receiving multiple-packet messages in multi-thread, resulting in a wrong packet order problem. We identified this problem by adding a debug message to the mctp_i3c_read function. According to the MCTP spec, a multiple-packet message must be composed in sequence, and if there is a wrong sequence, the whole message will be discarded and wait for the next SOM. For example, SOM → Pkt Seq #2 → Pkt Seq #1 → Pkt Seq #3 → EOM. Therefore, we try to solve this problem by adding a mutex to the mctp_i3c_read function. Before the modification, when a command requesting a multiple-packet message response is sent consecutively, an error usually occurs within 100 loops. After the mutex, it can go through 40000 loops without any error, and it seems to run well. Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver") Signed-off-by: Leo Yang <Leo-Yang@quantatw.com> Link: https://patch.msgid.link/20250107031529.3296094-1-Leo-Yang@quantatw.com [pabeni@redhat.com: dropped already answered question from changelog] Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09drm/xe/dg1: Fix power gate sequence.Rodrigo Vivi
sub-pipe PG is not present on DG1. Setting these bits can disable other power gates and cause GPU hangs on video playbacks. VLK: 16314, 4304 Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13381 Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241219235536.454270-1-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 2f12e9c029315c1400059b2e7fdf53117c09c3a9) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-01-09drm/xe: Fix tlb invalidation when wedgingLucas De Marchi
If GuC fails to load, the driver wedges, but in the process it tries to do stuff that may not be initialized yet. This moves the xe_gt_tlb_invalidation_init() to be done earlier: as its own doc says, it's a software-only initialization and should had been named with the _early() suffix. Move it to be called by xe_gt_init_early(), so the locks and seqno are initialized, avoiding a NULL ptr deref when wedging: xe 0000:03:00.0: [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01 xe 0000:03:00.0: [drm] *ERROR* GT0: firmware signature verification failed xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged. ... BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 UID: 0 PID: 3908 Comm: modprobe Tainted: G U W 6.13.0-rc4-xe+ #3 Tainted: [U]=USER, [W]=WARN Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DDR5 UDIMM CRB, BIOS ADLSFWI1.R00.3275.A00.2207010640 07/01/2022 RIP: 0010:xe_gt_tlb_invalidation_reset+0x75/0x110 [xe] This can be easily triggered by poking the GuC binary to force a signature failure. There will still be an extra message, xe 0000:03:00.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100 but that's better than a NULL ptr deref. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3956 Fixes: c9474b726b93 ("drm/xe: Wedge the entire device") Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103001111.331684-2-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 5001ef3af8f2c972d6fd9c5221a8457556f8bea6) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-01-08Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-01-07 (ice, igc) For ice: Arkadiusz corrects mask value being used to determine DPLL phase range. Przemyslaw corrects frequency value for E823 devices. For igc: En-Wei Wu adds a check and, early, return for failed register read. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: return early when failing to read EECD register ice: fix incorrect PHY settings for 100 GB/s ice: fix max values for dpll pin phase adjust ==================== Link: https://patch.msgid.link/20250107190150.1758577-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 07:58:12 +0000