summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-11-10stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exitingYang Yingliang
pci_enable_msi() has been called in loongson_dwmac_probe(), so pci_disable_msi() needs be called in remove path and error path of probe(). Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-10Merge tag 'amd-drm-fixes-6.1-2022-11-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.1-2022-11-09: amdgpu: - SMU 13.0.4 update - GPUVM TLB race fix - DCN 3.1.4 fixes - DCN 3.2.x fixes - Vega10 fan fix - BACO fix for Beige Goby board - PSR fix - GPU VM PT locking fixes amdkfd: - CRIU fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221109234554.6028-1-alexander.deucher@amd.com
2022-11-09cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in ↵Zhengchao Shao
cxgb4vf_open() When t4vf_update_port_info() failed in cxgb4vf_open(), resources applied during adapter goes up are not cleared. Fix it. Only be compiled, not be tested. Fixes: 18d79f721e0a ("cxgb4vf: Update port information in cxgb4vf_open()") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109012100.99132-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHzTan, Tee Min
Current Intel platform has an output of ~976ms interval when probed on 1 Pulse-per-Second(PPS) hardware pin. The correct PTP clock frequency for PCH GbE should be 204.8MHz instead of 200MHz. PSE GbE PTP clock rate remains at 200MHz. Fixes: 58da0cfa6cf1 ("net: stmmac: create dwmac-intel.c to contain all Intel platform") Signed-off-by: Ling Pei Lee <pei.lee.ling@intel.com> Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Gan Yi Fang <yi.fang.gan@intel.com> Link: https://lore.kernel.org/r/20221108020811.12919-1-yi.fang.gan@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()Zhengchao Shao
When failed to bind qsets in cxgb_up() for opening device, napi isn't disabled. When open cxgb3 device next time, it will trigger a BUG_ON() in napi_enable(). Compile tested only. Fixes: 48c4b6dbb7e2 ("cxgb3 - fix port up/down error path") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109021451.121490-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09net: cpsw: disable napi in cpsw_ndo_open()Zhengchao Shao
When failed to create xdp rxqs or fill rx channels in cpsw_ndo_open() for opening device, napi isn't disabled. When open cpsw device next time, it will report a invalid opcode issue. Compiled tested only. Fixes: d354eb85d618 ("drivers: net: cpsw: dual_emac: simplify napi usage") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109011537.96975-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09drm/amd/display: only fill dirty rectangles when PSR is enabledHamza Mahfooz
Currently, we are calling fill_dc_dirty_rects() even if PSR isn't supported by the relevant link in amdgpu_dm_commit_planes(), this is undesirable especially because when drm.debug is enabled we are printing messages in fill_dc_dirty_rects() that are only useful for debugging PSR (and confusing otherwise). So, we can instead limit the filling of dirty rectangles to only when PSR is enabled. Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amdgpu: disable BACO on special BEIGE_GOBY cardGuchun Chen
Still avoid intermittent failure. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-09drm/amdgpu: Drop eviction lock when allocating PT BOPhilip Yang
Re-take the eviction lock immediately again after the allocation is completed, to fix circular locking warning with drm_buddy allocator. Move amdgpu_vm_eviction_lock/unlock/trylock to amdgpu_vm.h as they are called from multiple files. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amdgpu: Unlock bo_list_mutex after error handlingPhilip Yang
Get below kernel WARNING backtrace when pressing ctrl-C to kill kfdtest application. If amdgpu_cs_parser_bos returns error after taking bo_list_mutex, as caller amdgpu_cs_ioctl will not unlock bo_list_mutex, this generates the kernel WARNING. Add unlock bo_list_mutex after amdgpu_cs_parser_bos error handling to cleanup bo_list userptr bo. WARNING: kfdtest/2930 still has locks held! 1 lock held by kfdtest/2930: (&list->bo_list_mutex){+.+.}-{3:3}, at: amdgpu_cs_ioctl+0xce5/0x1f10 [amdgpu] stack backtrace: dump_stack_lvl+0x44/0x57 get_signal+0x79f/0xd00 arch_do_signal_or_restart+0x36/0x7b0 exit_to_user_mode_prepare+0xfd/0x1b0 syscall_exit_to_user_mode+0x19/0x40 do_syscall_64+0x40/0x80 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 ↵Asher Song
properly"" This reverts commit 4545ae2ed3f2f7c3f615a53399c9c8460ee5bca7. The origin patch "drm/amdgpu: getting fan speed pwm for vega10 properly" works fine. Test failure is caused by test case self. Signed-off-by: Asher Song <Asher.Song@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32Dillon Varone
[WHY?] Data return times when using lowest memclk can be <= 60us, which can cause underflow on high bandwidth displays with a workload. [HOW?] Enforce a minimum prefetch time during validation for low memclk modes. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Fix gpio port mapping issueSteve Su
[Why] 1. Port of gpio has different mapping. [How] 1. Add a dummy entry in mapping table. 2. Fix incorrect mask bit field access. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Steve Su <steve.su@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Fix reg timeout in enc314_enable_fifoNicholas Kazlauskas
[Why] The link enablement sequence can end up resetting the encoder while the PHY symclk isn't yet on. This means that waiting for symclk on will timeout, along with the reset bit never asserting high. This causes unnecessary delay when enabling the link and produces a warning affecting multiple IGT tests. [How] Don't wait for the symclk to be on here because firmware already does. Don't wait for reset if we know the symclk isn't on. Split the reset into a helper function that checks the bit and decides whether or not a delay is sufficient. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-09drm/amd/display: Fix FCLK deviation and tool compile issuesChaitanya Dhere
[Why] Recent backports from open source do not have header inclusion pattern that is consistent with inclusion style in the rest of the file. This breaks the internal tool builds as well. A recent commit erronously modified the original DML formula for calculating ActiveClockChangeLatencyHidingY. This resulted in a FCLK deviation from the golden values. [How] Change the way in which display_mode_vba.h is included so that it is consistent with the inclusion style in rest of the file which also fixes the tool build. Restore the DML formula to its original state to fix the FCLK deviation. Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Zeromem mypipe heap struct before using itAurabindo Pillai
[Why&How] Bug was caused when moving variable from stack to heap because it was reusable and garbage was left over, so we need to zero mem. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amd/display: Update SR watermarks for DCN314Nicholas Kazlauskas
[Why & How] New values requested by hardware after fine-tuning. Update for all memory types. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-09drm/amdgpu: workaround for TLB seq raceChristian König
It can happen that we query the sequence value before the callback had a chance to run. Workaround that by grabbing the fence lock and releasing it again. Should be replaced by hw handling soon. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org # 5.19+ Fixes: 5255e146c99a6 ("drm/amdgpu: rework TLB flushing") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2113 Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Philip Yang <Philip.Yang@amd.com> Tested-by: Stefan Springer <stefanspr94@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-09drm/amdkfd: Fix error handling in criu_checkpointFelix Kuehling
Checkpoint BOs last. That way we don't need to close dmabuf FDs if something else fails later. This avoids problematic access to user mode memory in the error handling code path. criu_checkpoint_bos has its own error handling and cleanup that does not depend on access to user memory. In the private data, keep BOs before the remaining objects. This is necessary to restore things in the correct order as restoring events depends on the events-page BO being restored first. Fixes: be072b06c739 ("drm/amdkfd: CRIU export BOs as prime dmabuf objects") Reported-by: Jann Horn <jannh@google.com> CC: Rajneesh Bhardwaj <Rajneesh.Bhardwaj@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-09drm/amdkfd: Fix error handling in kfd_criu_restore_eventsFelix Kuehling
mutex_unlock before the exit label because all the error code paths that jump there didn't take that lock. This fixes unbalanced locking errors in case of restore errors. Fixes: 40e8a766a761 ("drm/amdkfd: CRIU checkpoint and restore events") Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-09drm/amd/pm: update SMU IP v13.0.4 msg interface headerTim Huang
Some of the unused messages that were used earlier in development have been freed up as spare messages, no intended functional changes. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tim Huang <tim.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-09iavf: Fix VF driver counting VLAN 0 filtersMichal Jaron
VF driver mistakenly counts VLAN 0 filters, when no PF driver counts them. Do not count VLAN 0 filters, when VLAN_V2 is engaged. Counting those filters in, will affect filters size by -1, when sending batched VLAN addition message. Fixes: 968996c070ef ("iavf: Fix VLAN_V2 addition/rejection") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-09ice: Fix spurious interrupt during removal of trusted VFNorbert Zulinski
Previously, during removal of trusted VF when VF is down there was number of spurious interrupt equal to number of queues on VF. Add check if VF already has inactive queues. If VF is disabled and has inactive rx queues then do not disable rx queues. Add check in ice_vsi_stop_tx_ring if it's VF's vsi and if VF is disabled. Fixes: efe41860008e ("ice: Fix memory corruption in VF driver") Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-09net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actionsRoi Dayan
esw_attr is only allocated if namespace is fdb. BUG: KASAN: slab-out-of-bounds in parse_tc_actions+0xdc6/0x10e0 [mlx5_core] Write of size 4 at addr ffff88815f185b04 by task tc/2135 CPU: 5 PID: 2135 Comm: tc Not tainted 6.1.0-rc2+ #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x7d print_report+0x170/0x471 ? parse_tc_actions+0xdc6/0x10e0 [mlx5_core] kasan_report+0xbc/0xf0 ? parse_tc_actions+0xdc6/0x10e0 [mlx5_core] parse_tc_actions+0xdc6/0x10e0 [mlx5_core] Fixes: 94d651739e17 ("net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-09net/mlx5e: E-Switch, Fix comparing termination table instanceRoi Dayan
The pkt_reformat pointer being saved under flow_act and not dest attribute in the termination table instance. Fix the comparison pointers. Also fix returning success if one pkt_reformat pointer is null and the other is not. Fixes: 249ccc3c95bd ("net/mlx5e: Add support for offloading traffic from uplink to uplink") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-09net/mlx5e: TC, Fix wrong rejection of packet-per-second policingJianbo Liu
In the bellow commit, we added support for PPS policing without removing the check which block offload of such cases. Fix it by removing this check. Fixes: a8d52b024d6d ("net/mlx5e: TC, Support offloading police action") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-09net/mlx5e: Fix tc acts array not to be dependent on enum orderRoi Dayan
The tc acts array should not be dependent on kernel internal flow action id enum. Fix the array initialization. Fixes: fad547906980 ("net/mlx5e: Add tc action infrastructure") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-09net/mlx5e: Fix usage of DMA sync APIMaxim Mikityanskiy
DMA sync functions should use the same direction that was used by DMA mapping. Use DMA_BIDIRECTIONAL for XDP_TX from regular RQ, which reuses the same mapping that was used for RX, and DMA_TO_DEVICE for XDP_TX from XSK RQ and XDP_REDIRECT, which establish a new mapping in this direction. On the RX side, use the same direction that was used when setting up the mapping (DMA_BIDIRECTIONAL for XDP, DMA_FROM_DEVICE otherwise). Also don't skip sync for device when establishing a DMA_FROM_DEVICE mapping for RX, as some architectures (ARM) may require invalidating caches before the device can use the mapping. It doesn't break the bugfix made in commit 0b7cfa4082fb ("net/mlx5e: Fix page DMA map/unmap attributes"), since the bug happened on unmap. Fixes: 0b7cfa4082fb ("net/mlx5e: Fix page DMA map/unmap attributes") Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-09net/mlx5e: Add missing sanity checks for max TX WQE sizeMaxim Mikityanskiy
The commit cited below started using the firmware capability for the maximum TX WQE size. This commit adds an important check to verify that the driver doesn't attempt to exceed this capability, and also restores another check mistakenly removed in the cited commit (a WQE must not exceed the page size). Fixes: c27bd1718c06 ("net/mlx5e: Read max WQEBBs on the SQ from firmware") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-09net/mlx5: fw_reset: Don't try to load device in case PCI isn't workingShay Drory
In case PCI reads fail after unload, there is no use in trying to load the device. Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-09net/mlx5: E-switch, Set to legacy mode if failed to change switchdev modeChris Mi
No need to rollback to the other mode because probably will fail again. Just set to legacy mode and clear fdb table created flag. So that fdb table will not be cleared again. Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-09net/mlx5: Allow async trigger completion execution on single CPU systemsRoy Novich
For a single CPU system, the kernel thread executing mlx5_cmd_flush() never releases the CPU but calls down_trylock(&cmd→sem) in a busy loop. On a single processor system, this leads to a deadlock as the kernel thread which executes mlx5_cmd_invoke() never gets scheduled. Fix this, by adding the cond_resched() call to the loop, allow the command completion kernel thread to execute. Fixes: 8e715cd613a1 ("net/mlx5: Set command entry semaphore up once got index free") Signed-off-by: Alexander Schmidt <alexschm@de.ibm.com> Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-09net/mlx5: Bridge, verify LAG state when adding bond to bridgeVlad Buslov
Mlx5 LAG is initialized asynchronously on a workqueue which means that for a brief moment after setting mlx5 UL representors as lower devices of a bond netdevice the LAG itself is not fully initialized in the driver. When adding such bond device to a bridge mlx5 bridge code will not consider it as offload-capable, skip creating necessary bookkeeping and fail any further bridge offload-related commands with it (setting VLANs, offloading FDBs, etc.). In order to make the error explicit during bridge initialization stage implement the code that detects such condition during NETDEV_PRECHANGEUPPER event and returns an error. Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-09drm: rcar-du: Fix Kconfig dependency between RCAR_DU and RCAR_MIPI_DSILaurent Pinchart
When the R-Car MIPI DSI driver was added, it was a standalone encoder driver without any dependency to or from the R-Car DU driver. Commit 957fe62d7d15 ("drm: rcar-du: Fix DSI enable & disable sequence") then added a direct call from the DU driver to the MIPI DSI driver, without updating Kconfig to take the new dependency into account. Fix it the same way that the LVDS encoder is handled. Fixes: 957fe62d7d15 ("drm: rcar-du: Fix DSI enable & disable sequence") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2022-11-09drm/panfrost: Split io-pgtable requests properlyRobin Murphy
Although we don't use 1GB block mappings, we still need to split map/unmap requests at 1GB boundaries to match what io-pgtable expects. Fix that, and add some explanation to make sense of it all. Fixes: 3740b081795a ("drm/panfrost: Update io-pgtable API") Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/49e54bb4019cd06e01549b106d7ac37c3d182cd3.1667927179.git.robin.murphy@arm.com
2022-11-09net: wwan: iosm: fix kernel test robot reported errorsM Chetan Kumar
Include linux/vmalloc.h in iosm_ipc_coredump.c & iosm_ipc_devlink.c to resolve kernel test robot errors. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-09net: wwan: iosm: fix invalid mux header typeM Chetan Kumar
Data stall seen during peak DL throughput test & packets are dropped by mux layer due to invalid header type in datagram. During initlization Mux aggregration protocol is set to default UL/DL size and TD count of Mux lite protocol. This configuration mismatch between device and driver is resulting in data stall/packet drops. Override the UL/DL size and TD count for Mux aggregation protocol. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-09net: wwan: iosm: fix driver not working with INTEL_IOMMU disabledM Chetan Kumar
With INTEL_IOMMU disable config or by forcing intel_iommu=off from grub some of the features of IOSM driver like browsing, flashing & coredump collection is not working. When driver calls DMA API - dma_map_single() for tx transfers. It is resulting in dma mapping error. Set the device DMA addressing capabilities using dma_set_mask() and remove the INTEL_IOMMU dependency in kconfig so that driver follows the platform config either INTEL_IOMMU enable or disable. Fixes: f7af616c632e ("net: iosm: infrastructure") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-09net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfgM Chetan Kumar
ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to obtain the wwan power state configuration from BIOS but is not freeing the acpi_object. The acpi_evaluate_dsm() returned acpi_object to be freed. Free the acpi_object after use. Fixes: 7e98d785ae61 ("net: iosm: entry point") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-09nvmet: fix a memory leakSagi Grimberg
We need to also free the dhchap_ctrl_secret when releasing nvmet_host. kmemleak complaint: -- unreferenced object 0xffff99b1cbca5140 (size 64): comm "check", pid 4864, jiffies 4305092436 (age 2913.583s) hex dump (first 32 bytes): 44 48 48 43 2d 31 3a 30 30 3a 65 36 2b 41 63 44 DHHC-1:00:e6+AcD 39 76 47 4d 52 57 59 78 67 54 47 44 51 59 47 78 9vGMRWYxgTGDQYGx backtrace: [<00000000c07d369d>] kstrdup+0x2e/0x60 [<000000001372171c>] 0xffffffffc0cceec6 [<0000000010dbf50b>] 0xffffffffc0cc6783 [<000000007465e93c>] configfs_write_iter+0xb1/0x120 [<0000000039c23f62>] vfs_write+0x2be/0x3c0 [<000000002da4351c>] ksys_write+0x5f/0xe0 [<00000000d5011e32>] do_syscall_64+0x38/0x90 [<00000000503870cf>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-11-09nvmet: fix memory leak in nvmet_subsys_attr_model_store_lockedAleksandr Miloserdov
Since model_number is allocated before it needs to be freed before kmemdump_nul. Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-11-09nvme: quiet user passthrough command errorsKeith Busch
The driver is spamming the kernel logs for entirely harmless errors from user space submitting unsupported commands. Just silence the errors. The application has direct access to command status, so there's no need to log these. And since every passthrough command now uses the quiet flag, move the setting to the common initializer. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Alan Adamson <alan.adamson@oracle.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Tested-by: Alan Adamson <alan.adamson@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-11-09mmc: sdhci-esdhc-imx: use the correct host caps for MMC_CAP_8_BIT_DATAHaibo Chen
MMC_CAP_8_BIT_DATA belongs to struct mmc_host, not struct sdhci_host. So correct it here. Fixes: 1ed5c3b22fc7 ("mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1667893503-20583-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-11-08ibmveth: Reduce default tx queues to 8Nick Child
Previously, the default number of transmit queues was 16. Due to resource concerns, set to 8 queues instead. Still allow the user to set more queues (max 16) if they like. Since the driver is virtualized away from the physical NIC, the purpose of multiple queues is purely to allow for parallel calls to the hypervisor. Therefore, there is no noticeable effect on performance by reducing queue count to 8. Fixes: d926793c1de9 ("ibmveth: Implement multi queue on xmit") Reported-by: Dave Taht <dave.taht@gmail.com> Signed-off-by: Nick Child <nnac123@linux.ibm.com> Link: https://lore.kernel.org/r/20221107203215.58206-1-nnac123@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-08net: nixge: disable napi when enable interrupts failed in nixge_open()Zhengchao Shao
When failed to enable interrupts in nixge_open() for opening device, napi isn't disabled. When open nixge device next time, it will reports a invalid opcode issue. Fix it. Only be compiled, not be tested. Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221107101443.120205-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-08net: tun: call napi_schedule_prep() to ensure we own a napiEric Dumazet
A recent patch exposed another issue in napi_get_frags() caught by syzbot [1] Before feeding packets to GRO, and calling napi_complete() we must first grab NAPI_STATE_SCHED. [1] WARNING: CPU: 0 PID: 3612 at net/core/dev.c:6076 napi_complete_done+0x45b/0x880 net/core/dev.c:6076 Modules linked in: CPU: 0 PID: 3612 Comm: syz-executor408 Not tainted 6.1.0-rc3-syzkaller-00175-g1118b2049d77 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:napi_complete_done+0x45b/0x880 net/core/dev.c:6076 Code: c1 ea 03 0f b6 14 02 4c 89 f0 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 24 04 00 00 41 89 5d 1c e9 73 fc ff ff e8 b5 53 22 fa <0f> 0b e9 82 fe ff ff e8 a9 53 22 fa 48 8b 5c 24 08 31 ff 48 89 de RSP: 0018:ffffc90003c4f920 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000030 RCX: 0000000000000000 RDX: ffff8880251c0000 RSI: ffffffff875a58db RDI: 0000000000000007 RBP: 0000000000000001 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff888072d02628 R13: ffff888072d02618 R14: ffff888072d02634 R15: 0000000000000000 FS: 0000555555f13300(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055c44d3892b8 CR3: 00000000172d2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> napi_complete include/linux/netdevice.h:510 [inline] tun_get_user+0x206d/0x3a60 drivers/net/tun.c:1980 tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:2191 [inline] do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735 do_iter_write+0x182/0x700 fs/read_write.c:861 vfs_writev+0x1aa/0x630 fs/read_write.c:934 do_writev+0x133/0x2f0 fs/read_write.c:977 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f37021a3c19 Fixes: 1118b2049d77 ("net: tun: Fix memory leaks of napi_get_frags") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wang Yufen <wangyufen@huawei.com> Link: https://lore.kernel.org/r/20221107180011.188437-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-08net: marvell: prestera: fix memory leak in prestera_rxtx_switch_init()Zhengchao Shao
When prestera_sdma_switch_init() failed, the memory pointed to by sw->rxtx isn't released. Fix it. Only be compiled, not be tested. Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Vadym Kochan <vadym.kochan@plvision.eu> Link: https://lore.kernel.org/r/20221108025607.338450-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-08Merge tag 'linux-can-fixes-for-6.1-20221107' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== can 2022-11-07 The first patch is by Chen Zhongjin and adds a missing dev_remove_pack() to the AF_CAN protocol. Zhengchao Shao's patch fixes a potential NULL pointer deref in AF_CAN's can_rx_register(). The next patch is by Oliver Hartkopp and targets the CAN ISO-TP protocol, and fixes the state handling for echo TX processing. Oliver Hartkopp's patch for the j1939 protocol adds a missing initialization of the CAN headers inside outgoing skbs. Another patch by Oliver Hartkopp fixes an out of bounds read in the check for invalid CAN frames in the xmit callback of virtual CAN devices. This touches all non virtual device drivers as we decided to rename the function requiring that netdev_priv points to a struct can_priv. (Note: This patch will create a merge conflict with net-next where the pch_can driver has removed.) The last patch is by Geert Uytterhoeven and adds the missing ECC error checks for the channels 2-7 in the rcar_canfd driver. * tag 'linux-can-fixes-for-6.1-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: rcar_canfd: Add missing ECC error checks for channels 2-7 can: dev: fix skb drop check can: j1939: j1939_send_one(): fix missing CAN header initialization can: isotp: fix tx state handling for echo tx processing can: af_can: fix NULL pointer dereference in can_rx_register() can: af_can: can_exit(): add missing dev_remove_pack() of canxl_packet ==================== Link: https://lore.kernel.org/r/20221107133217.59861-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-08drivers: net: xgene: disable napi when register irq failed in xgene_enet_open()Zhengchao Shao
When failed to register irq in xgene_enet_open() for opening device, napi isn't disabled. When open xgene device next time, it will reports a invalid opcode issue. Fix it. Only be compiled, not be tested. Fixes: aeb20b6b3f4e ("drivers: net: xgene: fix: ifconfig up/down crash") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221107043032.357673-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-08drm/amdgpu: Fix the lpfn checking condition in drm buddyMa Jun
Because the value of man->size is changed during suspend/resume process, use mgr->mm.size instead of man->size here for lpfn checking. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220914125331.2467162-1-Jun.Ma2@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
generated by cgit (git 2.34.1) at 2025-09-11 09:52:50 +0000