| Age | Commit message (Collapse) | Author |
|---|
|
Some cosmetic changes as well as a missing __init annotation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Instead of bypassing the kernel's adaptation layer for performing EFI
runtime calls, wire up ACPI PRM handling into it. This means these calls
can no longer occur concurrently with EFI runtime calls, and will be
made from the EFI runtime workqueue. It also means any page faults
occurring during PRM handling will be identified correctly as
originating in firmware code.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Avoid duplicating the EFI arch setup and teardown routine calls numerous
times in efi_call_rts(). Instead, expand the efi_call_virt_pointer()
macro into efi_call_rts(), taking the pre and post parts out of the
switch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
__efi_call_virt() exists as an alternative for efi_call_virt() for the
sole reason that ResetSystem() returns void, and so we cannot use a call
to it in the RHS of an assignment.
Given that there is only a single user, let's drop the macro, and expand
it into the caller. That way, the remaining macro can be tightened
somewhat in terms of type safety too.
Note that the use of typeof() on the runtime service invocation does not
result in an actual call being made, but it does require a few pointer
types to be fixed up and converted into the proper function pointer
prototypes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The LBA has already called ioremap() to get it's virtual address,
which can be used for the IOSAPIC as well.
Avoid calling ioremap() again and just reuse the correct
iomem address for the IOSAPIC.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Wrap the calls to blocking_notifier_call_chain() for the line state
notifier with a helper that allows us to use fewer lines of code and
simpler syntax.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The following lockdep warning appears during boot on a Xen dom0 system:
[ 96.388794] ======================================================
[ 96.388797] WARNING: possible circular locking dependency detected
[ 96.388799] 6.4.0-rc5-default+ #8 Tainted: G EL
[ 96.388803] ------------------------------------------------------
[ 96.388804] xenconsoled/1330 is trying to acquire lock:
[ 96.388808] ffffffff82acdd10 (xs_watch_rwsem){++++}-{3:3}, at: register_xenbus_watch+0x45/0x140
[ 96.388847]
but task is already holding lock:
[ 96.388849] ffff888100c92068 (&u->msgbuffer_mutex){+.+.}-{3:3}, at: xenbus_file_write+0x2c/0x600
[ 96.388862]
which lock already depends on the new lock.
[ 96.388864]
the existing dependency chain (in reverse order) is:
[ 96.388866]
-> #2 (&u->msgbuffer_mutex){+.+.}-{3:3}:
[ 96.388874] __mutex_lock+0x85/0xb30
[ 96.388885] xenbus_dev_queue_reply+0x48/0x2b0
[ 96.388890] xenbus_thread+0x1d7/0x950
[ 96.388897] kthread+0xe7/0x120
[ 96.388905] ret_from_fork+0x2c/0x50
[ 96.388914]
-> #1 (xs_response_mutex){+.+.}-{3:3}:
[ 96.388923] __mutex_lock+0x85/0xb30
[ 96.388930] xenbus_backend_ioctl+0x56/0x1c0
[ 96.388935] __x64_sys_ioctl+0x90/0xd0
[ 96.388942] do_syscall_64+0x5c/0x90
[ 96.388950] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 96.388957]
-> #0 (xs_watch_rwsem){++++}-{3:3}:
[ 96.388965] __lock_acquire+0x1538/0x2260
[ 96.388972] lock_acquire+0xc6/0x2b0
[ 96.388976] down_read+0x2d/0x160
[ 96.388983] register_xenbus_watch+0x45/0x140
[ 96.388990] xenbus_file_write+0x53d/0x600
[ 96.388994] vfs_write+0xe4/0x490
[ 96.389003] ksys_write+0xb8/0xf0
[ 96.389011] do_syscall_64+0x5c/0x90
[ 96.389017] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 96.389023]
other info that might help us debug this:
[ 96.389025] Chain exists of:
xs_watch_rwsem --> xs_response_mutex --> &u->msgbuffer_mutex
[ 96.413429] Possible unsafe locking scenario:
[ 96.413430] CPU0 CPU1
[ 96.413430] ---- ----
[ 96.413431] lock(&u->msgbuffer_mutex);
[ 96.413432] lock(xs_response_mutex);
[ 96.413433] lock(&u->msgbuffer_mutex);
[ 96.413434] rlock(xs_watch_rwsem);
[ 96.413436]
*** DEADLOCK ***
[ 96.413436] 1 lock held by xenconsoled/1330:
[ 96.413438] #0: ffff888100c92068 (&u->msgbuffer_mutex){+.+.}-{3:3}, at: xenbus_file_write+0x2c/0x600
[ 96.413446]
An ioctl call IOCTL_XENBUS_BACKEND_SETUP (record #1 in the report)
results in calling xenbus_alloc() -> xs_suspend() which introduces
ordering xs_watch_rwsem --> xs_response_mutex. The xenbus_thread()
operation (record #2) creates xs_response_mutex --> &u->msgbuffer_mutex.
An XS_WATCH write to the xenbus file then results in a complain about
the opposite lock order &u->msgbuffer_mutex --> xs_watch_rwsem.
The dependency xs_watch_rwsem --> xs_response_mutex is spurious. Avoid
it and the warning by changing the ordering in xs_suspend(), first
acquire xs_response_mutex and then xs_watch_rwsem. Reverse also the
unlocking order in xs_suspend_cancel() for consistency, but keep
xs_resume() as is because it needs to have xs_watch_rwsem unlocked only
after exiting xs suspend and re-adding all watches.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230607123624.15739-1-petr.pavlu@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
into soc/drivers
This pull request contains Broadcom SoCs drivers changes for 6.6, please
pull the following:
- Rob updates the Broadcom SoC drivers to use the correct DT includes
* tag 'arm-soc/for-6.6/drivers' of https://github.com/Broadcom/stblinux:
soc: bcm: Explicitly include correct DT includes
Link: https://lore.kernel.org/r/20230818164539.2871539-3-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The tg3 driver will use kmalloc() under some conditions. Check the
frag_size and use slab_build_skb() when frag_size is 0. Silences
the warning introduced by commit ce098da1497c ("skbuff: Introduce
slab_build_skb()"):
Use slab_build_skb() instead
...
tg3_poll_work+0x638/0xf90 [tg3]
Fixes: ce098da1497c ("skbuff: Introduce slab_build_skb()")
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Closes: https://lore.kernel.org/all/1bd4cb9c-4eb8-3bdb-3e05-8689817242d1@proxmox.com
Cc: Siva Reddy Kallam <siva.kallam@broadcom.com>
Cc: Prashant Sreedharan <prashant@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230818175417.never.273-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When switching from 10GBase-R/5GBase-R/USXGMII to one of the interface
modes provided by mtk-pcs-lynxi we need to make sure to always perform
a full configuration of the PHYA.
Implement pcs_disable op which resets the stored interface mode to
PHY_INTERFACE_MODE_NA to trigger a full reconfiguration once the LynxI
PCS driver had previously been deselected in favor of another PCS
driver such as the to-be-added driver for the USXGMII PCS found in
MT7988.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/f23d1a60d2c9d2fb72e32dcb0eaa5f7e867a3d68.1692327891.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/drivers
Driver changes for omaps for v6.6
Driver changes for ti-sysc interconnect target module driver and for
l3 interconnect error handler. The ti-sysc driver changes just enable
using it for 64-bit systems like TI am62 that have wake-up capability
for the wkup domain devices. The l3 error handling improves the code
to show the error source if an unrecoverable timeout error occurs.
* tag 'omap-for-v6.6/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix cast to enum warning
bus: ti-sysc: Fix a build warning with W=1 for sysconfig
bus: ti-sysc: Configure uart quirks for k3 SoC
bus: ti-sysc: Build driver for TI K3 SoCs
bus: ti-sysc: Fix build warning for 64-bit build
bus: omap_l3_smx: identify timeout cause before rebooting
Link: https://lore.kernel.org/r/pull-1692158857-597450@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.6
Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.
An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.
The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.
In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.
The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.
The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.
PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.
An off-by-one string length check is corrected in the QMI encoder
decoder library.
The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.
The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.
The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.
Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().
The list of VMIDs defined for the SCM assign memory interface is
extended.
* tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (52 commits)
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
dt-bindings: firmware: qcom: scm: Updating VMID list
dt-bindings: qcom: Update RPMHPD entries for some SoCs
soc: qcom: qmi_encdec: Restrict string length in decode
soc: qcom: smem: Fix incompatible types in comparison
soc: qcom: ocmem: add missing clk_disable_unprepare() in ocmem_dev_probe()
soc: qcom: socinfo: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
dt-bindings: arm: qcom,ids: drop the IPQ5019 SoC ID
soc: qcom: socinfo: drop the IPQ5019 SoC ID
soc: qcom: socinfo: add SM4450 ID
dt-bindings: arm: qcom,ids: add SoC ID for SM4450
soc: qcom: pmic_glink: enable altmode for SM8550
soc: qcom: pmic_glink_altmode: add retimer-switch support
soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
soc: qcom: rpmhpd: Add SDX75 power domains
dt-bindings: power: qcom,rpmpd: Add compatible for sdx75
genpd: Makefile: build imx
...
Link: https://lore.kernel.org/r/20230818023338.2484467-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers
PD_VO powerdomain for rv1126 and disabling of the automatic switch between
sdmmc and jtag for rk3588 (makes sdmmc unreliable).
This includes the shared genpd-v6.5-rc1-1 tag from Ulf Hansson, which moves
the powerdomain drivers into a new genpd subsystem.
* tag 'v6.6-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
Link: https://lore.kernel.org/r/40318909.XM6RcZxFsP@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch fixes some sparse warnings about incorrect type.
The address about PCC communication space should use '__iomem' tag.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308151142.dH5Muhva-lkp@intel.com/
Fixes: 886bdf9c883b ("soc: hisilicon: Support HCCS driver on Kunpeng SoC")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20230816073706.33297-1-lihuisong@huawei.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Loongson-2's power management controller was ACPI, supports ACPI
S2Idle (Suspend To Idle), ACPI S3 (Suspend To RAM), ACPI S4 (Suspend To
Disk), ACPI S5 (Soft Shutdown) and supports multiple wake-up methods
(USB, GMAC, PWRBTN, etc.). This driver was to add power management
controller support that base on dts for Loongson-2 series SoCs.
Co-developed-by: Liu Yun <liuyun@loongson.cn>
Signed-off-by: Liu Yun <liuyun@loongson.cn>
Co-developed-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Cc: soc@kernel.org
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/20230803063703.5659-3-zhuyinbo@loongson.cn
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Merge series from Yang Yingliang <yangyingliang@huawei.com>:
I'm trying to rename the legacy name to modern name used in SPI drivers,
this is part4 patchset.
After introducing devm_spi_alloc_host/spi_alloc_host(), the legacy
named function devm_spi_alloc_master/spi_alloc_master() can be replaced.
And also change other legacy name master/slave to modern name host/target
or controller. Each patch compile test passed.
|
|
Merge series from like@awinic.com:
Add regulator driver for the device Awinic AW37503 which is
single inductor - dual output power supply device. AW37503
device is designed to support general positive/negative
driven applications like TFT display panels.
|
|
All callers of __of_{add,remove,update}_property() and
__of_{attach,detach}_node() wrap the call with the devtree_lock
spinlock. Let's move the spinlock into the functions. This allows moving
the sysfs update functions into those functions as well.
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-6-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The changeset code checks for a property in the deadprops list when
adding/updating a property, but of_add_property() and
of_update_property() do not. As the users of these functions are pretty
simple, they have not hit this scenario or else the property lists
would get corrupted.
With this there are 3 cases of removing a property from either deadprops
or properties lists, so add a helper to find and remove a matching
property.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-5-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
__of_update_property() returns the existing property if there is one, but
that value is never added to the changeset. Updates work because the
existing property was also retrieved before in of_changeset_action(),
but that is racy as of_changeset_action() doesn't hold any locks. The
property could be changed before the changeset is applied.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-4-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Several places print the changeset action with node and property
details. Refactor these into a common printing helper. The complicating
factor is some prints are debug and some are errors. Solve this with a
bit of preprocessor magic.
Some cases printed the 'cset' which was the changeset entry pointer
rather than the whole changeset itself. The changeset entry is not all that
interesting and gets obfuscated by default anyways. So just drop it.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-3-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pick up changeset fixes for further rework.
|
|
The qunipro_g4_sel clear is also needed for new platforms with major
version > 5. Fix the version check to take this into account.
Fixes: 9c02aa24bf40 ("scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5")
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230821-topic-sm8x50-upstream-ufs-major-5-plus-v2-1-f42a4b712e58@linaro.org
Reviewed-by: "Bao D. Nguyen" <quic_nguyenb@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The search and wrap around logic in the ufshcd_mcq_sqe_search() function
does not work correctly when the hwq's queue depth is not a power of two
number. Correct it so that any queue depth with a positive integer value
within the supported range would work.
Signed-off-by: "Bao D. Nguyen" <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/ff49c15be205135ed3ec186f3086694c02867dbd.1692149603.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Fixes: 8d7290348992 ("scsi: ufs: mcq: Add supporting functions for MCQ abort")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
commit 0f8e5651095b
("of/platform: Propagate firmware node by calling device_set_node()")
use of_fwnode_handle to replace of_node_get, which introduces a side
effect that the refcount is not increased. Then the out of tree
jailhouse hypervisor enable/disable test will trigger kernel dump in
of_overlay_remove, with the following sequence
"
of_changeset_revert(&overlay_changeset);
of_changeset_destroy(&overlay_changeset);
of_overlay_remove(&overlay_id);
"
So increase the refcount to avoid issues.
This patch also release the refcount when releasing amba device to avoid
refcount leakage.
Fixes: 0f8e5651095b ("of/platform: Propagate firmware node by calling device_set_node()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230821023928.3324283-2-peng.fan@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Eric has pointed out that we still have 3 users of do_each_thread().
Change them to use for_each_process_thread() and kill this helper.
There is a subtle change, after do_each_thread/while_each_thread g == t ==
&init_task, while after for_each_process_thread() they both point to
nowhere, but this doesn't matter.
> Why is for_each_process_thread() better than do_each_thread()?
Say, for_each_process_thread() is rcu safe, do_each_thread() is not.
And certainly
for_each_process_thread(p, t) {
do_something(p, t);
}
looks better than
do_each_thread(p, t) {
do_something(p, t);
} while_each_thread(p, t);
And again, there are only 3 users of this awkward helper left. It should
have been killed years ago and in fact I thought it had already been
killed. It uses while_each_thread() which needs some changes.
Link: https://lkml.kernel.org/r/20230817163708.GA8248@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: "Christian Brauner (Microsoft)" <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jiri Slaby <jirislaby@kernel.org> # tty/serial
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add one more space to FileHugePages and FilePmdMapped, so the output is
aligned with other rows in /sys/devices/system/node/nodeN/meminfo.
Link: https://lkml.kernel.org/r/be861b50-a790-e041-bcb0-2a987dcfd1a@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With memmap on memory, some architecture needs more details w.r.t altmap
such as base_pfn, end_pfn, etc to unmap vmemmap memory. Instead of
computing them again when we remove a memory block, embed vmem_altmap
details in struct memory_block if we are using memmap on memory block
feature.
[yangyingliang@huawei.com: fix error return code in add_memory_resource()]
Link: https://lkml.kernel.org/r/20230809081552.1351184-1-yangyingliang@huawei.com
Link: https://lkml.kernel.org/r/20230808091501.287660-7-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If not supported, fallback to not using memap on memmory. This avoids
the need for callers to do the fallback.
Link: https://lkml.kernel.org/r/20230808091501.287660-3-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the helpers to simplify code.
Link: https://lkml.kernel.org/r/20230728050043.59880-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The intel_pstate CPU frequency scaling driver does not
use policy->cur and it is 0.
When the CPU frequency is outdated arch_freq_get_on_cpu()
will default to the nominal clock frequency when its call to
cpufreq_quick_getpolicy_cur returns the never updated 0.
Thus, the listed frequency might be outside of currently
set limits. Some users are complaining about the high
reported frequency, albeit stale, when their system is
idle and/or it is above the reduced maximum they have set.
This patch will maintain policy_cur for the intel_pstate
driver at the current minimum CPU frequency.
Reported-by: Yang Jie <yang.jie@linux.intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217597
Signed-off-by: Doug Smythies <dsmythies@telus.net>
[ rjw: White space damage fixes and comment adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This reverts commit cb39c35783f26892bb1a72b1115c94fa2e77f4c5.
Patch was applied to hastily, the problem is already fixed
in Alex's vfio tree:
https://lore.kernel.org/all/20230821112237.105872b5.alex.williamson@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the worst case, the freq_table of policy data is not sorted and
contains duplicate frequencies, this means that it needs to iterate
through the entire freq_table of policy to ensure each frequency is
unique in the freq_table of stats data, this has a time complexity of
O(N^2), where N is the number of frequencies in the freq_table of
policy.
However, if the policy.freq_table is already sorted and contains no
duplicate frequencies, it can reduce the time complexity of creating
stats.freq_table to O(N), the 'freq_table_sorted' field of policy data
can be used to indicate whether the policy.freq_table is sorted.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
[ rjw: Fix typo in changelog, remove redundant parens ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Other parts of the kernel may use LPS0 constraints information to make
decisions on what power state to put a device into.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[ rjw: Rewrite kerneldoc, rearrange if () statement, edit subject and
changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We have one existing and one coming user of this macro.
Introduce a helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
While parsing the constraints show all the entries for the table
to aid with debugging other problems later.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The constraints table should be resetting the `list` object
after running through all of `info_obj` iterations.
This adjusts whitespace as well as less code will now be included
with each loop. This fixes a functional problem is fixed where a
badly formed package in the inner loop may have incorrect data.
Fixes: 146f1ed852a8 ("ACPI: PM: s2idle: Add AMD support to handle _DSM")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If a badly constructed firmware includes multiple `ACPI_TYPE_PACKAGE`
objects while evaluating the AMD LPS0 _DSM, there will be a memory
leak. Explicitly guard against this.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When code uses a pre-increment it makes the reader question "why".
In the constraint fetching code there is no reason for the variables
to be pre-incremented so adjust to post-increment.
No intended functional changes.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is a warning reported by kernel test robot:
smatch warnings:
drivers/net/ethernet/mellanox/mlx5/core/lib/devcom.c:264
mlx5_devcom_send_event() warn: variable dereferenced before
IS_ERR check devcom (see line 259)
The reason for the warning is that the pointer is used before check, put
the assignment to comp after devcom check to silence the warning.
Fixes: 88d162b47981 ("net/mlx5: Devcom, Infrastructure changes")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202308041028.AkXYDwJ6-lkp@intel.com/
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In WQE (Work Queue Entry), the two types of data segments memories are
pointers and inline data, where inline data is passed directly as
part of the WQE.
For software steering, the maximal inline size should be less than
2*MLX5_SEND_WQE_BB, i.e., the potential data must fit with the required
inline WQE headers.
Two consecutive blocks (MLX5_SEND_WQE_BB) are not guaranteed to reside
on the same memory page. Hence, writes to MLX5_SEND_WQE_BB should be
done separately, i.e., each MLX5_SEND_WQE_BB should be obtained using
the mlx5_wq_cyc_get_wqe macro.
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
As this struct is only used for devlink ports created for PF/VF,
add it to the name of the variable to distinguish from the SF related
ops struct.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
It is not possible that the functions in devlink_port.c are called for
uplink port. Remove this leftover code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
For uplink port, mlx5_esw_offloads_load/unload_rep() are currently
called. There are 2 check inside, which effectively make the
functions a simple wrappers of mlx5_esw_offloads_rep_load/unload()
for uplink port. So avoid one check and indirection and call
mlx5_esw_offloads_rep_load/unload() for uplink port directly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Health syndrome enum values were duplicated in mlx5_ifc and health.c,
the correct place for them is mlx5_ifc.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Remove local variable that is already defined outside of
the scope of this block.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Consolidate the mlx5_irq and mlx5_irq->mask allocation, to simplify
error flows and to match the dealloctation sequence @irq_release for
symmetry.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
|
|
There is a spelling mistake in a warning message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Improve aRFS observability by adding new set of counters. Each Rx
ring will have this set of counters listed below.
These counters are exposed through ethtool -S.
1) arfs_add: number of times a new rule has been created.
2) arfs_request_in: number of times a rule was requested to move from
its current Rx ring to a new Rx ring (incremented on the destination
Rx ring).
3) arfs_request_out: number of times a rule was requested to move out
from its current Rx ring (incremented on source/current Rx ring).
4) arfs_expired: number of times a rule has been expired by the
kernel and removed from HW.
5) arfs_err: number of times a rule creation or modification has
failed.
This patch removes rx[i]_xsk_arfs_err counter and its documentation in
mlx5/counters.rst since aRFS activity does not occur in XSK RQ's.
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
|
