| Age | Commit message (Collapse) | Author |
|---|
|
Make glk_load_luts() a bit lighter for the common case
where neither the degamma LUT nor pipe CSC are enabled
by not loading the linear degamma LUT. Making .load_luts()
as lightweight as possible is a good idea since it may need
to execute from a vblank worker under tight deadlines.
My earlier reasoning for always loading the linear degamma LUT
was to avoid an extra LUT load when just enabling/disabling the
pipe CSC, but that is nonsense since we load the LUTs on every
flagged color management change/modeset anyway (either of which
is needed for a pipe CSC toggle).
We can also get rid of the glk_can_preload_luts() special
case since the presence of the degamma LUT will now always
match csc_enable.
v2: Fix typos (Uma)
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-6-ville.syrjala@linux.intel.com
|
|
Since we now have a place (pre_csc_lut) to stuff a purely
internal LUT we can replace glk_load_degamma_lut_linear()
with such a thing and just rely on the normal
glk_load_degamma_lut() to load it as well.
drm_mode_config_cleanup() will clean this up for us.
v2: Pass on the error pointer
Drop a hint about this into the state dump
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-5-ville.syrjala@linux.intel.com
|
|
Since we now have the extra step from hw.(de)gamma_lut into
{pre,post}_csc_lut let's make sure we didn't forget to assign
them appropriately. Ie. basically making sure intel_color_check()
was called when necessary (and that it did its job suitable well).
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-4-ville.syrjala@linux.intel.com
|
|
Add an extra remapping step between the logical state of the LUTs
(hw.(de)gamma_lut) as specified via uapi/bigjoiner copy vs.
the actual state of the LUTs programmed into the hardware.
With this we should be finally able finish the (de)gamma
readout/state checker support for the remaining platforms
(ilk-skl) where the same hardware LUT can be positioned
either before or after the pipe CSC unit. Where we position
it depends on factors such as presence of the logical degamma
LUT, RGB vs. YCbCr output, full vs. limited RGB quantization
range.
Without the extra remapping step the state readout doesn't
really know whether the LUT read from the hardware is the
degamma or gamma LUT, and so we is unable to accurately store
it into our crtc state. With the remapping step we know
exactly where to put it given the order of the LUT vs. CSC
in the hardware state.
Only the initial hw->uapi state readout done during driver
load/resume still has the problem of not really knowing
what to do with the LUT(s). But we can just assume 1:1
mapping there and let subsequent commits fix things up.
Another benefit is that we now have a place for purely
internal LUTs, without complicating the bigjoiner uapi->hw
copy logic. This should prove useful for streamlining
glk degamma LUT handling.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-3-ville.syrjala@linux.intel.com
|
|
Make ilk_load_luts() ready for a degamma lut. Currently we never
have one, but soon we may get one from readout, and I think we
may want to change the state computation such that we may end up
with one even when userspace has simply supplied a gamma lut.
At least the code now follows the path laid out by the ivb/bdw
counterpars.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-2-ville.syrjala@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"The only thing which stands out is a fix for a backlight regression on
Chromebooks (under drivers/acpi, with ack from Rafael).
Other then that nothing special to report just various small fixes and
hardware-id additions"
* tag 'platform-drivers-x86-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
ACPI: video: Fix missing native backlight on Chromebooks
platform/x86/intel: pmc/core: Add Raptor Lake support to pmc core driver
leds: simatic-ipc-leds-gpio: fix incorrect LED to GPIO mapping
platform/x86/amd: pmc: Read SMU version during suspend on Cezanne systems
platform/x86: thinkpad_acpi: Fix reporting a non present second fan on some models
platform/x86: asus-wmi: Add support for ROG X16 tablet mode
|
|
The returned value on success is an index of the matching string,
starting from 0. Reflect this in the documentation.
Fixes: 3f5c8d318785 ("device property: Add fwnode_property_match_string()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Endpoints are normally deleted from the bandwidth list when they are
dropped, before the virt device is freed.
If xHC host is dying or being removed then the endpoints aren't dropped
cleanly due to functions returning early to avoid interacting with a
non-accessible host controller.
So check and delete endpoints that are still on the bandwidth list when
freeing the virt device.
Solves a list_del corruption kernel crash when unbinding xhci-pci,
caused by xhci_mem_cleanup() when it later tried to delete already freed
endpoints from the bandwidth list.
This only affects hosts that use software bandwidth checking, which
currenty is only the xHC in intel Panther Point PCH (Ivy Bridge)
Cc: stable@vger.kernel.org
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For optimal power consumption of USB4 routers the XHCI PCIe endpoint
used for tunneling must be in D3. Historically this is accomplished
by a long list of PCIe IDs that correspond to these endpoints because
the xhci_hcd driver will not default to allowing runtime PM for all
devices.
As both AMD and Intel have released new products with new XHCI controllers
this list continues to grow. In reviewing the XHCI specification v1.2 on
page 607 there is already a requirement that the PCI power management
states D3hot and D3cold must be supported.
In the quirk list, use this to indicate that runtime PM should be allowed
on XHCI controllers. The following controllers are known to be xHC 1.2 and
dropped explicitly:
* AMD Yellow Carp
* Intel Alder Lake
* Intel Meteor Lake
* Intel Raptor Lake
[keep PCI ID for Alder Lake PCH for recently added quirk -Mathias]
Cc: stable@vger.kernel.org
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-4-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Systems based on Alder Lake P see significant boot time delay if
boot firmware tries to control usb ports in unexpected link states.
This is seen with self-powered usb devices that survive in U3 link
suspended state over S5.
A more generic solution to power off ports at shutdown was attempted in
commit 83810f84ecf1 ("xhci: turn off port power in shutdown")
but it caused regression.
Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and
ports back to default state in shutdown.
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This appears to fix the error:
"xhci_hcd <address>; ERROR Transfer event TRB DMA ptr not part of
current TD ep_index 2 comp_code 13" that appear spuriously (or pretty
often) when using a r8152 USB3 ethernet adapter with integrated hub.
ASM1042 reports as a 0.96 controller, but appears to behave more like 1.0
Inspired by this email thread: https://markmail.org/thread/7vzqbe7t6du6qsw3
Cc: stable@vger.kernel.org
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-2-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This error triggers on some architectures with unsigned `char` types:
drivers/staging/rtl8192e/rtllib_softmac_wx.c:459 rtllib_wx_set_essid() warn: impossible condition '(extra[i] < 0) => (0-255 < 0)'
But actually, the entire test is bogus, as ssids don't have any sign
validity rules like that. So just remove this check look all together.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20221025122150.583617-1-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:
drivers/misc/sgi-gru/grumain.c:711 gru_check_chiplet_assignment() warn: 'gts->ts_user_chiplet_id' is unsigned
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20221025025223.573543-1-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
"First set of Counter fixes for 6.1 cycle
Typical driver fixes for races and bugs. This also includes a sparse
warning fix for the recently introduced counter_array API: the macro
DEFINE_COUNTER_ARRAY_POLARITY() is reduced to a simple structure
definition rather than multiple data structure definitions.
- 104-quad-8
* Fix race getting function mode and direction
- microchip-tcb-capture
* Handle Signal1 read and Synapse
- ti-ecap-capture
* fix IS_ERR() vs NULL check
- counter
* Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array"
* tag 'counter-fixes-for-6.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: 104-quad-8: Fix race getting function mode and direction
counter: microchip-tcb-capture: Handle Signal1 read and Synapse
counter: ti-ecap-capture: fix IS_ERR() vs NULL check
counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
|
|
cti_enable_hw() and cti_disable_hw() are called from an atomic context
so shouldn't use runtime PM because it can result in a sleep when
communicating with firmware.
Since commit 3c6656337852 ("Revert "firmware: arm_scmi: Add clock
management to the SCMI power domain""), this causes a hang on Juno when
running the Perf Coresight tests or running this command:
perf record -e cs_etm//u -- ls
This was also missed until the revert commit because pm_runtime_put()
was called with the wrong device until commit 692c9a499b28 ("coresight:
cti: Correct the parameter for pm_runtime_put")
With lock and scheduler debugging enabled the following is output:
coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022
Call trace:
dump_backtrace+0x134/0x140
show_stack+0x20/0x58
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
__might_resched+0x180/0x228
__might_sleep+0x50/0x88
__pm_runtime_resume+0xac/0xb0
cti_enable+0x44/0x120
coresight_control_assoc_ectdev+0xc0/0x150
coresight_enable_path+0xb4/0x288
etm_event_start+0x138/0x170
etm_event_add+0x48/0x70
event_sched_in.isra.122+0xb4/0x280
merge_sched_in+0x1fc/0x3d0
visit_groups_merge.constprop.137+0x16c/0x4b0
ctx_sched_in+0x114/0x1f0
perf_event_sched_in+0x60/0x90
ctx_resched+0x68/0xb0
perf_event_exec+0x138/0x508
begin_new_exec+0x52c/0xd40
load_elf_binary+0x6b8/0x17d0
bprm_execve+0x360/0x7f8
do_execveat_common.isra.47+0x218/0x238
__arm64_sys_execve+0x48/0x60
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.4+0xfc/0x120
do_el0_svc+0x34/0xc0
el0_svc+0x40/0x98
el0t_64_sync_handler+0x98/0xc0
el0t_64_sync+0x170/0x174
Fix the issue by removing the runtime PM calls completely. They are not
needed here because it must have already been done when building the
path for a trace.
Fixes: 835d722ba10a ("coresight: cti: Initial CoreSight CTI Driver")
Cc: stable <stable@kernel.org>
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Reported-by: Cristian Marussi <Cristian.Marussi@arm.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
[ Fix build warnings ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221025131032.1149459-1-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To ensure that child node is found, don't rely on child's node name
which can take different value, but on child's compatible name.
Fixes: f5c5936d6b4d ("usb: dwc3: st: Fix node's child name")
Cc: stable <stable@kernel.org>
Cc: Jerome Audu <jerome.audu@st.com>
Reported-by: Felipe Balbi <felipe@balbi.sh>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20220930142018.890535-1-patrice.chotard@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The overhead of preparing sg data is high for transfers with limited
payload. When transferring isoc over high-speed usb the maximum payload
is rather small which is a good argument no to use sg. This patch is
changing the uvc_video_encode_isoc_sg encode function only to be used
for super speed gadgets.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20221017221141.3134818-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes a warning about extra docs about a function argument that has been
removed a while back:
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:3888: warning: Excess function
parameter 'sync_file' description in 'vmw_execbuf_copy_fence_user'
Fixes: a0f90c881570 ("drm/vmwgfx: Fix stale file descriptors on failed usercopy")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-18-zack@kde.org
|
|
It's important to get the initial size of cotables right because
otherwise every app needs to start with a synchronous cotable resize.
This has an measurable impact on system wide performance but is not
relevant for long running single full screen apps for which the cotable
resizes will happen early in the lifecycle and will continue running
just fine.
To eliminate the initial cotable resizes match the initial sizes to what
the userspace expects. The actual result of the patch is simply setting
the initial size of two of the cotables to a size that will align them
to two pages instead of one.
For a piglit run, before:
name | total | per frame | per sec
vmw_cotable_resize | 1405 | 0.12 | 1.58
vmw_execbuf_ioctl | 290805 | 25.43 | 326.05
After:
name | total | per frame | per sec
vmw_cotable_resize | 4 | 0.00 | 0.00
vmw_execbuf_ioctl | 281673 | 25.10 | 274.68
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Michael Banack <banackm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-17-zack@kde.org
|
|
There's been a lot of cotable resizes on startup which we can track
by adding a mks stat to measure both the invocation count and
time spent doing cotable resizes.
This is only used if kernel is configured with CONFIG_DRM_VMWGFX_MKSSTATS
The stats are collected on the host size inside the vmware-stats.log
file.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Michael Banack <banackm@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-16-zack@kde.org
|
|
The explicit vblank handling was never finished. The driver never had
the full implementation of vblank and what was there is emulated
by DRM when the driver doesn't pretend to be implementing it itself.
Let DRM handle the vblank emulation and stop pretending the driver is
doing anything special with vblank. In the future it would make sense
to implement helpers for full vblank handling because vkms and
amdgpu_vkms already have that code. Exporting it to common helpers and
having all three drivers share it would make sense (that would be largely
just to allow more of igt to run).
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Michael Banack <banackm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-15-zack@kde.org
|
|
Instead of using vmwgfx specific framebuffer implementation use the drm
fb helpers. There's no change in functionality, the only difference
is a reduction in the amount of code inside the vmwgfx module.
drm fb helpers do not deal correctly with changes in crtc preferred mode
at runtime, but the old fb code wasn't dealing with it either.
Same situation applies to high-res fb consoles - the old code was
limited to 1176x885 because it was checking for legacy/deprecated
memory limites, the drm fb helpers are limited to the initial resolution
set on fb due to first problem (drm fb helpers being unable to handle
hotplug crtc preferred mode changes).
This also removes the kernel config for disabling fb support which hasn't
been used or supported in a very long time.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-14-zack@kde.org
|
|
Dumb buffers allow a very limited set of formats. Basically everything
apart from 1, 2 and 4 is expected to return an error. Make vmwgfx
follow those guidelines.
This fixes igt's dumb_buffer invalid_bpp test on vmwgfx.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-13-zack@kde.org
|
|
The vmwgfx driver has migrated from using the hashtable in vmwgfx_hashtab
to the linux/hashtable implementation. Remove the vmwgfx_hashtab from the
driver.
Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-12-zack@kde.org
|
|
This is part of an effort to move from the vmwgfx_open_hash hashtable to
linux/hashtable implementation.
Refactor the ref_hash hashtable, used for fast lookup of reference objects
associated with a ttm file.
This also exposed a problem related to inconsistently using 32-bit and
64-bit keys with this hashtable. The hash function used changes depending
on the size of the type, and results are not consistent across numbers,
for example, hash_32(329) = 329, but hash_long(329) = 328. This would
cause the lookup to fail for objects already in the hashtable, since keys
of different sizes were being passed during adding and lookup. This was
not an issue before because vmwgfx_open_hash always used hash_long.
Fix this by always using 64-bit keys for this hashtable, which means that
hash_long is always used.
Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-11-zack@kde.org
|
|
Extend the cursor diffing support to support the command-path.
Signed-off-by: Michael Banack <banackm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-10-zack@kde.org
|
|
Add support for cursor surfaces when using mob cursors.
Signed-off-by: Michael Banack <banackm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-9-zack@kde.org
|
|
Avoid making the SVGA device do extra work if the new cursor image
matches the old one.
Signed-off-by: Michael Banack <banackm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-8-zack@kde.org
|
|
Clean up the cursor mob path by moving ownership of the mobs into the
plane_state, and just leaving a cache of unused mobs in the plane
itself.
Signed-off-by: Michael Banack <banackm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-7-zack@kde.org
|
|
implementation.
Vmwgfx's hashtab implementation needs to be replaced with linux/hashtable
to reduce maintenence burden.
As part of this effort, refactor the res_ht hashtable used for resource
validation during execbuf execution to use linux/hashtable implementation.
This also refactors vmw_validation_context to use vmw_sw_context as the
container for the hashtable, whereas before it used a vmwgfx_open_hash
directly. This makes vmw_validation_context less generic, but there is
no functional change since res_ht is the only instance where validation
context used a hashtable in vmwgfx driver.
Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-6-zack@kde.org
|
|
The object_hash hashtable for ttm objects is not being used.
Remove it and perform refactoring in ttm_object init function.
Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-5-zack@kde.org
|
|
implementation.
Vmwgfx's hashtab implementation needs to be replaced with linux/hashtable
to reduce maintenance burden.
Refactor cmdbuf resource manager to use linux/hashtable.h implementation
as part of this effort.
Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-4-zack@kde.org
|
|
Function vmw_mksstat_add_ioctl allocates three big arrays on stack.
That triggers frame-size [-Wframe-larger-than=] warning. Refactor
that function to use kmalloc_array instead.
v2: Initialize page to null to avoid possible uninitialized use of it,
spotted by the kernel test robot <lkp@intel.com>
Signed-off-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-3-zack@kde.org
|
|
Driver id registers are a new mechanism in the svga device to hint to the
device which driver is running. This should not change device behavior
in any way, but might be convenient to work-around specific bugs
in guest drivers.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-2-zack@kde.org
|
|
If node_types does not have video/vbi/meta inputs or outputs,
then set num_inputs/num_outputs to 0 instead of 1.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0c90f649d2f5 (media: vivid: add vivid_create_queue() helper)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
>From what I can see, this is not needed. And since using it issues a 'deprecated'
warning, just drop it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
vivid_update_format_cap() can be called from an s_ctrl callback.
In that case (keep_controls == true) no control framework functions
can be called that take the control handler mutex.
The new call to v4l2_ctrl_modify_dimensions() did exactly that.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 6bc7643d1b9c (media: vivid: add pixel_array test control)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add sanity checks to v4l2_valid_dv_timings() to ensure that the provided
blanking values are reasonable.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b18787ed1ce3 ([media] v4l2-dv-timings: add new helper module)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Whenever the compose width/height values change, the dev->bitmap_cap
vmalloc'ed array must be freed and dev->bitmap_cap set to NULL.
This was done in some places, but not all. This is only an issue if
overlay support is enabled and the bitmap clipping is used.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
VIDIOC_S_FBUF is by definition a scary ioctl, which is why only root
can use it. But at least check if the framebuffer parameters match that
of one of the framebuffer created by vivid, and reject anything else.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
NVMe spec requires all transports support dword aligned addresses, which
is already set in the namespace request_queue. Set the same limit in the
multipath device's request_queue as well.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
memory pressure
When destroying a queue, when calling sock_release, the network stack
might need to allocate an skb to send a FIN/RST. When that happens
during memory pressure, there is a need to reclaim memory, which
in turn may ask the nvme-tcp device to write out dirty pages, however
this is not possible due to a ctrl teardown that is going on.
Set PF_MEMALLOC to the task that releases the socket to grant access
to PF_MEMALLOC reserves. In addition, do the same for the nvme-tcp
thread as this may also originate from the swap itself and should
be more resilient to memory pressure situations.
This fixes the following lockdep complaint:
--
======================================================
WARNING: possible circular locking dependency detected
6.0.0-rc2+ #25 Tainted: G W
------------------------------------------------------
kswapd0/92 is trying to acquire lock:
ffff888114003240 (sk_lock-AF_INET-NVME){+.+.}-{0:0}, at: tcp_sendpage+0x23/0xa0
but task is already holding lock:
ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x11e/0x160
kmem_cache_alloc_node+0x44/0x530
__alloc_skb+0x158/0x230
tcp_send_active_reset+0x7e/0x730
tcp_disconnect+0x1272/0x1ae0
__tcp_close+0x707/0xd90
tcp_close+0x26/0x80
inet_release+0xfa/0x220
sock_release+0x85/0x1a0
nvme_tcp_free_queue+0x1fd/0x470 [nvme_tcp]
nvme_do_delete_ctrl+0x130/0x13d [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write_iter+0x356/0x530
vfs_write+0x4e8/0xce0
ksys_write+0xfd/0x1d0
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (sk_lock-AF_INET-NVME){+.+.}-{0:0}:
__lock_acquire+0x2a0c/0x5690
lock_acquire+0x18e/0x4f0
lock_sock_nested+0x37/0xc0
tcp_sendpage+0x23/0xa0
inet_sendpage+0xad/0x120
kernel_sendpage+0x156/0x440
nvme_tcp_try_send+0x48a/0x2630 [nvme_tcp]
nvme_tcp_queue_rq+0xefb/0x17e0 [nvme_tcp]
__blk_mq_try_issue_directly+0x452/0x660
blk_mq_plug_issue_direct.constprop.0+0x207/0x700
blk_mq_flush_plug_list+0x6f5/0xc70
__blk_flush_plug+0x264/0x410
blk_finish_plug+0x4b/0xa0
shrink_lruvec+0x1263/0x1ea0
shrink_node+0x736/0x1a80
balance_pgdat+0x740/0x10d0
kswapd+0x5f2/0xaf0
kthread+0x256/0x2f0
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(sk_lock-AF_INET-NVME);
lock(fs_reclaim);
lock(sk_lock-AF_INET-NVME);
*** DEADLOCK ***
3 locks held by kswapd0/92:
#0: ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0
#1: ffff88811f21b0b0 (q->srcu){....}-{0:0}, at: blk_mq_flush_plug_list+0x6b3/0xc70
#2: ffff888170b11470 (&queue->send_mutex){+.+.}-{3:3}, at: nvme_tcp_queue_rq+0xeb9/0x17e0 [nvme_tcp]
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In nvme_tcp_ddgst_update(), sg_init_marker() is called with an
uninitialized scatterlist. This is probably fine, but gcc complains:
CC [M] drivers/nvme/host/tcp.o
In file included from ./include/linux/dma-mapping.h:10,
from ./include/linux/skbuff.h:31,
from ./include/net/net_namespace.h:43,
from ./include/linux/netdevice.h:38,
from ./include/net/sock.h:46,
from drivers/nvme/host/tcp.c:12:
In function ‘sg_mark_end’,
inlined from ‘sg_init_marker’ at ./include/linux/scatterlist.h:356:2,
inlined from ‘nvme_tcp_ddgst_update’ at drivers/nvme/host/tcp.c:390:2:
./include/linux/scatterlist.h:234:11: error: ‘sg.page_link’ is used uninitialized [-Werror=uninitialized]
234 | sg->page_link |= SG_END;
| ~~^~~~~~~~~~~
drivers/nvme/host/tcp.c: In function ‘nvme_tcp_ddgst_update’:
drivers/nvme/host/tcp.c:388:28: note: ‘sg’ declared here
388 | struct scatterlist sg;
| ^~
cc1: all warnings being treated as errors
Use sg_init_table() instead, which basically memset the scatterlist to
zero first before calling sg_init_marker().
Signed-off-by: Nam Cao <namcaov@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 46573fd6369f ("cpufreq: intel_pstate: hybrid: Rework HWP
calibration") attempted to use the information from CPPC (the nominal
performance in particular) to obtain the scaling factor allowing the
frequency to be computed if the HWP performance level of the given CPU
is known or vice versa.
However, it turns out that on some platforms this doesn't work, because
the CPPC information on them does not align with the contents of the
MSR_HWP_CAPABILITIES registers.
This basically means that the only way to make intel_pstate work on all
of the hybrid platforms to date is to use the observation that on all
of them the scaling factor between the HWP performance levels and
frequency for P-cores is 78741 (approximately 100000/1.27). For
E-cores it is 100000, which is the same as for all of the non-hybrid
"core" platforms and does not require any changes.
Accordingly, make intel_pstate use 78741 as the scaling factor between
HWP performance levels and frequency for P-cores on all hybrid platforms
and drop the dependency of the HWP calibration code on CPPC.
Fixes: 46573fd6369f ("cpufreq: intel_pstate: hybrid: Rework HWP calibration")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some of the MSR accesses in intel_pstate are carried out on the CPU
that is running the code, but the values coming from them are used
for the performance scaling of the other CPUs.
This is problematic, for example, on hybrid platforms where
MSR_TURBO_RATIO_LIMIT for P-cores and E-cores is different, so the
values read from it on a P-core are generally not applicable to E-cores
and the other way around.
For this reason, make the driver access all MSRs on the target CPU on
platforms using the "core" pstate_funcs callbacks which is the case for
all of the hybrid platforms released to date. For this purpose, pass
a CPU argument to the ->get_max(), ->get_max_physical(), ->get_min()
and ->get_turbo() pstate_funcs callbacks and from there pass it to
rdmsrl_on_cpu() or rdmsrl_safe_on_cpu() to access the MSR on the target
CPU.
Fixes: 46573fd6369f ("cpufreq: intel_pstate: hybrid: Rework HWP calibration")
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We leaked dependency fences when processes were beeing killed.
Additional to that grab a reference to the last scheduled fence.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929180151.139751-1-christian.koenig@amd.com
|
|
The currently default Round-Robin GPU scheduling can result in starvation
of entities which have a large number of jobs, over entities which have
a very small number of jobs (single digit).
This can be illustrated in the following diagram, where jobs are
alphabetized to show their chronological order of arrival, where job A is
the oldest, B is the second oldest, and so on, to J, the most recent job to
arrive.
---> entities
j | H-F-----A--E--I--
o | --G-----B-----J--
b | --------C--------
s\/ --------D--------
WLOG, assuming all jobs are "ready", then a R-R scheduling will execute them
in the following order (a slice off of the top of the entities' list),
H, F, A, E, I, G, B, J, C, D.
However, to mitigate job starvation, we'd rather execute C and D before E,
and so on, given, of course, that they're all ready to be executed.
So, if all jobs are ready at this instant, the order of execution for this
and the next 9 instances of picking the next job to execute, should really
be,
A, B, C, D, E, F, G, H, I, J,
which is their chronological order. The only reason for this order to be
broken, is if an older job is not yet ready, but a younger job is ready, at
an instant of picking a new job to execute. For instance if job C wasn't
ready at time 2, but job D was ready, then we'd pick job D, like this:
0 +1 +2 ...
A, B, D, ...
And from then on, C would be preferred before all other jobs, if it is ready
at the time when a new job for execution is picked. So, if C became ready
two steps later, the execution order would look like this:
......0 +1 +2 ...
A, B, D, E, C, F, G, H, I, J
This is what the FIFO GPU scheduling algorithm achieves. It uses a
Red-Black tree to keep jobs sorted in chronological order, where picking
the oldest job is O(1) (we use the "cached" structure), and balancing the
tree is O(log n). IOW, it picks the *oldest ready* job to execute now.
The implementation is already in the kernel, and this commit only changes
the default GPU scheduling algorithm to use.
This was tested and achieves about 1% faster performance over the Round
Robin algorithm.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024212634.27230-1-luben.tuikov@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
RK3588(s) can have multiple gmac controllers.
Re-use rk3568 logic to distinguish them.
Fixes: 2f2b60a0ec28 ("net: ethernet: stmmac: dwmac-rk: Add gmac support for rk3588")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221021172422.88534-1-sebastian.reichel@collabora.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A typical DP-MST unplug removes a KMS connector. However care must
be taken to properly synchronize with user-space. The expected
sequence of events is the following:
1. The kernel notices that the DP-MST port is gone.
2. The kernel marks the connector as disconnected, then sends a
uevent to make user-space re-scan the connector list.
3. User-space notices the connector goes from connected to disconnected,
disables it.
4. Kernel handles the IOCTL disabling the connector. On success,
the very last reference to the struct drm_connector is dropped and
drm_connector_cleanup() is called.
5. The connector is removed from the list, and a uevent is sent to tell
user-space that the connector disappeared.
The very last step was missing. As a result, user-space thought the
connector still existed and could try to disable it again. Since the
kernel no longer knows about the connector, that would end up with
EINVAL and confused user-space.
Fix this by sending a hotplug uevent from drm_connector_cleanup().
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Jonas Ådahl <jadahl@redhat.com>
Tested-by: Jonas Ådahl <jadahl@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017153150.60675-2-contact@emersion.fr
|
|
This reverts commit 981f09295687f856d5345e19c7084aca481c1395.
It turns out this causes logically active but disconnected DP MST
connectors to disappear from the KMS resources list, and Mutter
then assumes the connector is already disabled. Later on Mutter tries
to re-use the same CRTC but fails since on the kernel side it's still
tied to the disconnected DP MST connector.
Signed-off-by: Simon Ser <contact@emersion.fr>
Tested-by: Jonas Ådahl <jadahl@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017153150.60675-1-contact@emersion.fr
|
