| Age | Commit message (Collapse) | Author |
|---|
|
Since the RNG loses freshness with system suspend/hibernation, when we
resume, immediately reseed using whatever data we can, which for this
particular case is the various timestamps regarding system suspend time,
in addition to more generally the RDSEED/RDRAND/RDTSC values that happen
whenever the crng reseeds.
On systems that suspend and resume automatically all the time -- such as
Android -- we skip the reseeding on suspend resumption, since that could
wind up being far too busy. This is the same trade-off made in
WireGuard.
In addition to reseeding upon resumption always mix into the pool these
various stamps on every power notification event.
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Currently, we do the jitter dance if two consecutive reads to the cycle
counter return different values. If they do, then we consider the cycle
counter to be fast enough that one trip through the scheduler will yield
one "bit" of credited entropy. If those two reads return the same value,
then we assume the cycle counter is too slow to show meaningful
differences.
This methodology is flawed for a variety of reasons, one of which Eric
posted a patch to fix in [1]. The issue that patch solves is that on a
system with a slow counter, you might be [un]lucky and read the counter
_just_ before it changes, so that the second cycle counter you read
differs from the first, even though there's usually quite a large period
of time in between the two. For example:
| real time | cycle counter |
| --------- | ------------- |
| 3 | 5 |
| 4 | 5 |
| 5 | 5 |
| 6 | 5 |
| 7 | 5 | <--- a
| 8 | 6 | <--- b
| 9 | 6 | <--- c
If we read the counter at (a) and compare it to (b), we might be fooled
into thinking that it's a fast counter, when in reality it is not. The
solution in [1] is to also compare counter (b) to counter (c), on the
theory that if the counter is _actually_ slow, and (a)!=(b), then
certainly (b)==(c).
This helps solve this particular issue, in one sense, but in another
sense, it mostly functions to disallow jitter entropy on these systems,
rather than simply taking more samples in that case.
Instead, this patch takes a different approach. Right now we assume that
a difference in one set of consecutive samples means one "bit" of
credited entropy per scheduler trip. We can extend this so that a
difference in two sets of consecutive samples means one "bit" of
credited entropy per /two/ scheduler trips, and three for three, and
four for four. In other words, we can increase the amount of jitter
"work" we require for each "bit", depending on how slow the cycle
counter is.
So this patch takes whole bunch of samples, sees how many of them are
different, and divides to find the amount of work required per "bit",
and also requires that at least some minimum of them are different in
order to attempt any jitter entropy.
Note that this approach is still far from perfect. It's not a real
statistical estimate on how much these samples vary; it's not a
real-time analysis of the relevant input data. That remains a project
for another time. However, it makes the same (partly flawed) assumptions
as the code that's there now, so it's probably not worse than the status
quo, and it handles the issue Eric mentioned in [1]. But, again, it's
probably a far cry from whatever a really robust version of this would
be.
[1] https://lore.kernel.org/lkml/20220421233152.58522-1-ebiggers@kernel.org/
https://lore.kernel.org/lkml/20220421192939.250680-1-ebiggers@kernel.org/
Cc: Eric Biggers <ebiggers@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
All platforms are now guaranteed to provide some value for
random_get_entropy(). In case some bug leads to this not being so, we
print a warning, because that indicates that something is really very
wrong (and likely other things are impacted too). This should never be
hit, but it's a good and cheap way of finding out if something ever is
problematic.
Since we now have viable fallback code for random_get_entropy() on all
platforms, which is, in the worst case, not worse than jiffies, we can
count on getting the best possible value out of it. That means there's
no longer a use for using jiffies as entropy input. It also means we no
longer have a reason for doing the round-robin register flow in the IRQ
handler, which was always of fairly dubious value.
Instead we can greatly simplify the IRQ handler inputs and also unify
the construction between 64-bits and 32-bits. We now collect the cycle
counter and the return address, since those are the two things that
matter. Because the return address and the irq number are likely
related, to the extent we mix in the irq number, we can just xor it into
the top unchanging bytes of the return address, rather than the bottom
changing bytes of the cycle counter as before. Then, we can do a fixed 2
rounds of SipHash/HSipHash. Finally, we use the same construction of
hashing only half of the [H]SipHash state on 32-bit and 64-bit. We're
not actually discarding any entropy, since that entropy is carried
through until the next time. And more importantly, it lets us do the
same sponge-like construction everywhere.
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, all in drivers.
These patches mosly fix error legs and exceptional conditions
(scsi_dh_alua, qla2xxx). The lpfc fixes are for coding issues with
lpfc features"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE
scsi: lpfc: Fix split code for FLOGI on FCoE
scsi: qla2xxx: Fix missed DMA unmap for aborted commands
scsi: scsi_dh_alua: Properly handle the ALUA transitioning state
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-05-13
1) Cleanups for the code behind the XFRM offload API. This is a
preparation for the extension of the API for policy offload.
From Leon Romanovsky.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: drop not needed flags variable in XFRM offload struct
net/mlx5e: Use XFRM state direction instead of flags
netdevsim: rely on XFRM state direction instead of flags
ixgbe: propagate XFRM offload state direction instead of flags
xfrm: store and rely on direction to construct offload flags
xfrm: rename xfrm_state_offload struct to allow reuse
xfrm: delete not used number of external headers
xfrm: free not used XFRM_ESP_NO_TRAILER flag
====================
Link: https://lore.kernel.org/r/20220513151218.4010119-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If CONFIG_PTP_1588_CLOCK=m and CONFIG_SFC_SIENA=y, the siena driver will fail to link:
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_remove_channel':
ptp.c:(.text+0xa28): undefined reference to `ptp_clock_unregister'
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_probe_channel':
ptp.c:(.text+0x13a0): undefined reference to `ptp_clock_register'
ptp.c:(.text+0x1470): undefined reference to `ptp_clock_unregister'
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_pps_worker':
ptp.c:(.text+0x1d29): undefined reference to `ptp_clock_event'
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_siena_ptp_get_ts_info':
ptp.c:(.text+0x301b): undefined reference to `ptp_clock_index'
To fix this build error, make SFC_SIENA depends on PTP_1588_CLOCK.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d48523cb88e0 ("sfc: Copy shared files needed for Siena (part 2)")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220513012721.140871-1-renzhijie2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eliminate the follow smatch warning:
drivers/gpu/drm/amd/amdgpu/nbio_v7_7.c:35 nbio_v7_7_get_rev_id() warn:
inconsistent indenting.
drivers/gpu/drm/amd/amdgpu/nbio_v7_7.c:214 nbio_v7_7_init_registers()
warn: inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Restrict ltq-cputemp to SOC_XWAY to fix build failure
- Add OF device ID table to tmp401 driver to enable auto-load
* tag 'hwmon-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltq-cputemp) restrict it to SOC_XWAY
hwmon: (tmp401) Add OF device ID table
|
|
Pull drm fixes from Dave Airlie:
"Pretty quiet week on the fixes front, 4 amdgpu and one i915 fix.
I think there might be a few misc fbdev ones outstanding, but I'll see
if they are necessary and pass them on if so.
amdgpu:
- Disable ASPM for VI boards on ADL platforms
- S0ix DCN3.1 display fix
- Resume regression fix
- Stable pstate fix
i915:
- fix for kernel memory corruption when running a lot of OpenCL tests
in parallel"
* tag 'drm-fixes-2022-05-13' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2)
Revert "drm/amd/pm: keep the BACO feature enabled for suspend"
drm/i915: Fix race in __i915_vma_remove_closed
drm/amd/display: undo clearing of z10 related function pointers
drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems
|
|
[ Similarly to commit a765ed47e4516 ("PCI: hv: Fix synchronization
between channel callback and hv_compose_msi_msg()"): ]
The (on-stack) teardown packet becomes invalid once the completion
timeout in hv_pci_bus_exit() has expired and hv_pci_bus_exit() has
returned. Prevent the channel callback from accessing the invalid
packet by removing the ID associated to such packet from the VMbus
requestor in hv_pci_bus_exit().
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20220511223207.3386-3-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
For additional robustness in the face of Hyper-V errors or malicious
behavior, validate all values that originate from packets that Hyper-V
has sent to the guest in the host-to-guest ring buffer. Ensure that
invalid values cannot cause data being copied out of the bounds of the
source buffer in hv_pci_onchannelcallback().
While at it, remove a redundant validation in hv_pci_generic_compl():
hv_pci_onchannelcallback() already ensures that all processed incoming
packets are "at least as large as [in fact larger than] a response".
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20220511223207.3386-2-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
VFIO PCI does a security check as part of hot reset to prove that the user
has permission to manipulate all the devices that will be impacted by the
reset.
Use a new API vfio_file_has_dev() to perform this security check against
the struct file directly and remove the vfio_group from VFIO PCI.
Since VFIO PCI was the last user of vfio_group_get_external_user() and
vfio_group_put_external_user() remove it as well.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Just change the argument from struct vfio_group to struct file *.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Instead of a general extension check change the function into a limited
test if the iommu_domain has enforced coherency, which is the only thing
kvm needs to query.
Make the new op self contained by properly refcounting the container
before touching it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
vfio_group_fops_open() ensures there is only ever one struct file open for
any struct vfio_group at any time:
/* Do we need multiple instances of the group open? Seems not. */
opened = atomic_cmpxchg(&group->opened, 0, 1);
if (opened) {
vfio_group_put(group);
return -EBUSY;
Therefor the struct file * can be used directly to search the list of VFIO
groups that KVM keeps instead of using the
vfio_external_group_match_file() callback to try to figure out if the
passed in FD matches the list or not.
Delete vfio_external_group_match_file().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The only caller wants to get a pointer to the struct iommu_group
associated with the VFIO group file. Instead of returning the group ID
then searching sysfs for that string to get the struct iommu_group just
directly return the iommu_group pointer already held by the vfio_group
struct.
It already has a safe lifetime due to the struct file kref, the vfio_group
and thus the iommu_group cannot be destroyed while the group file is open.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Now that the iommu core takes care of isolation there is no race between
driver attach and container unset. Once iommu_group_release_dma_owner()
returns the device can immediately be re-used.
Remove this mechanism.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v1-a1e8791d795b+6b-vfio_container_q_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Merge IOMMU dependencies for vfio.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
With very limited vram on svga3 it's difficult to handle all the surface
migrations. Without gbobjects, i.e. the ability to store surfaces in
guest mobs, there's no reason to support intermediate svga2 features,
especially because we can fall back to fb traces and svga3 will never
support those in-between features.
On svga3 we wither want to use fb traces or screen targets
(i.e. gbobjects), nothing in between. This fixes presentation on a lot
of fusion/esxi tech previews where the exposed svga3 caps haven't been
finalized yet.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3")
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-5-zack@kde.org
|
|
Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure
unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags
and modifiers which were never initialized. Garbage in those members
can cause random failures during the bringup of the fbcon.
Initializing the structure fixes random blank screens after bootup due
to flags/modifiers mismatches during the fbcon bring up.
Fixes: dabdcdc9822a ("drm/vmwgfx: Switch to mode_cmd2")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org
|
|
Port of the vmwgfx to SVGAv3 lacked support for fencing. SVGAv3 removed
FIFO's and replaced them with command buffers and extra registers.
The initial version of SVGAv3 lacked support for most advanced features
(e.g. 3D) which made fences unnecessary. That is no longer the case,
especially as 3D support is being turned on.
Switch from FIFO commands and capabilities to command buffers and extra
registers to enable fences on SVGAv3.
Fixes: 2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-5-zack@kde.org
|
|
The 2nd trial allocation under per-cpu presumption has been used to
prevent regression of allocation failure. However, it makes trouble for
maintenance without significant benefit. The slowpath branch is executed
extremely rarely: getting there is problematic. Therefore, we delete this
branch.
Since b09ab054b69b ("zram: support BDI_CAP_STABLE_WRITES"), zram has used
QUEUE_FLAG_STABLE_WRITES to prevent buffer change between 1st and 2nd
memory allocations. Since we remove second trial memory allocation logic,
we could remove the STABLE_WRITES flag because there is no change buffer
to be modified under us.
Link: https://lkml.kernel.org/r/20220505094443.11728-1-avromanov@sberdevices.ru
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
alloc_contig_range() now only needs to be aligned to pageblock_nr_pages,
drop virtio_mem size requirement that it needs to be MAX_ORDER_NR_PAGES.
Link: https://lkml.kernel.org/r/20220425143118.2850746-7-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit c1e8d7c6a7a6 ("mmap locking API: convert mmap_sem comments") missed
replacing some references of mmap_sem by mmap_lock due to misspelling
(mm_sem instead of mmap_sem).
Link: https://lkml.kernel.org/r/20220503113333.214124-1-mail@florommel.de
Signed-off-by: Florian Rommel <mail@florommel.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
An inclusion of cache.h in printk.h was added in 2014 in commit
c28aa1f0a847 ("printk/cache: mark printk_once test variable
__read_mostly") in order to bring in the definition of __read_mostly. The
usage of __read_mostly was later removed in commit 3ec25826ae33 ("printk:
Tie printk_once / printk_deferred_once into .data.once for reset") which
made the inclusion of cache.h unnecessary, so remove it.
We have a small amount of code that depended on the inclusion of cache.h
from printk.h; fix that code to include the appropriate header.
This fixes a circular inclusion on arm64 (linux/printk.h -> linux/cache.h
-> asm/cache.h -> linux/kasan-enabled.h -> linux/static_key.h ->
linux/jump_label.h -> linux/bug.h -> asm/bug.h -> linux/printk.h) that
would otherwise be introduced by the next patch.
Build tested using {allyesconfig,defconfig} x {arm64,x86_64}.
Link: https://linux-review.googlesource.com/id/I8fd51f72c9ef1f2d6afd3b2cbc875aa4792c1fba
Link: https://lkml.kernel.org/r/20220427195820.1716975-1-pcc@google.com
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Pull interconnect fixes from Georgi:
"interconnect fixes for v5.18-rc
This contains an additional fix for sc7180 and sdx55 platforms that helps
them to enter suspend even on devices that don't have the most recent DT
changes.
- interconnect: Restore sync state by ignoring ipa-virt in provider count
Signed-off-by: Georgi Djakov <djakov@kernel.org>"
* tag 'icc-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Restore sync state by ignoring ipa-virt in provider count
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Arm SMMU updates for 5.19
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy binding
- Minor cleanups
|
|
As enforce_cache_coherency has been introduced into the iommu_domain_ops,
the kernel component which owns the iommu domain is able to opt-in its
requirement for force snooping support. The iommu driver has no need to
hard code the page snoop control bit in the PASID table entries anymore.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220508123525.1973626-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220510023407.2759143-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The IOMMU force snooping capability is not required to be consistent
among all the IOMMUs anymore. Remove force snooping capability check
in the IOMMU hot-add path and domain_update_iommu_snooping() becomes
a dead code now.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220508123525.1973626-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220510023407.2759143-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
As domain->force_snooping only impacts the devices attached with the
domain, there's no need to check against all IOMMU units. On the other
hand, force_snooping could be set on a domain no matter whether it has
been attached or not, and once set it is an immutable flag. If no
device attached, the operation always succeeds. Then this empty domain
can be only attached to a device of which the IOMMU supports snoop
control.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220508123525.1973626-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220510023407.2759143-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In the attach_dev callback of the default domain ops, if the domain has
been set force_snooping, but the iommu hardware of the device does not
support SC(Snoop Control) capability, the callback should block it and
return a corresponding error code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220508123525.1973626-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220510023407.2759143-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Fold dmar_insert_one_dev_info() into domain_add_dev_info() which is its
only caller.
No intentional functional impact.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220416120423.879552-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220510023407.2759143-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The dmar_insert_one_dev_info() returns the pass-in domain on success and
NULL on failure. This doesn't make much sense. Change it to an integer.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220416120423.879552-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220510023407.2759143-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
dev_iommu_priv_get() is being used at the top of this function which
dereferences dev. Dev cannot be NULL after this. Remove the validity
check on dev and simplify the code.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20220313150337.593650-1-usama.anjum@collabora.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220510023407.2759143-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Originally, creating the dma_ranges resource list in pre-sorted fashion
was the simplest and most efficient way to enforce the order required by
iova_reserve_pci_windows(). However since then at least one PCI host
driver is now re-sorting the list for its own probe-time processing,
which doesn't seem entirely unreasonable, so that basic assumption no
longer holds. Make iommu-dma robust and get the sort order it needs by
explicitly sorting, which means we can also save the effort at creation
time and just build the list in whatever natural order the DT had.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/35661036a7e4160850895f9b37f35408b6a29f2f.1652091160.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The data type of the return value of the iommu_map_sg_atomic
is ssize_t, but the data type of iova size is size_t,
e.g. one is int while the other is unsigned int.
When iommu_map_sg_atomic return value is compared with iova size,
it will force the signed int to be converted to unsigned int, if
iova map fails and iommu_map_sg_atomic return error code is less
than 0, then (ret < iova_len) is false, which will to cause not
do free iova, and the master can still successfully get the iova
of map fail, which is not expected.
Therefore, we need to check the return value of iommu_map_sg_atomic
in two cases according to whether it is less than 0.
Fixes: ad8f36e4b6b1 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.15.*
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220507085204.16914-1-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
For long term references, frame_num is set to long_term_frame_idx which
does not require wrapping. This is fixed by observation, no directly
related issue have been found yet.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
If the timestamp of the src buffer differs from the timestamp of a held
dst buffer, the held buffer is implicitly removed and marked as done.
Add a trace to help debugging if someone hits that case.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
When larbdev is NULL (in the case I hit, the node is incorrectly set
iommus = <&iommu NUM>), it will cause device_link_add() fail and
kernel crashes when we try to print dev_name(larbdev).
Let's fail the probe if a larbdev is NULL to avoid invalid inputs from
dts.
It should work for normal correct setting and avoid the crash caused
by my incorrect setting.
Error log:
[ 18.189042][ T301] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
...
[ 18.344519][ T301] pstate: a0400005 (NzCv daif +PAN -UAO)
[ 18.345213][ T301] pc : mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu]
[ 18.346050][ T301] lr : mtk_iommu_probe_device+0xd0/0x118 [mtk_iommu]
[ 18.346884][ T301] sp : ffffffc00a5635e0
[ 18.347392][ T301] x29: ffffffc00a5635e0 x28: ffffffd44a46c1d8
[ 18.348156][ T301] x27: ffffff80c39a8000 x26: ffffffd44a80cc38
[ 18.348917][ T301] x25: 0000000000000000 x24: ffffffd44a80cc38
[ 18.349677][ T301] x23: ffffffd44e4da4c6 x22: ffffffd44a80cc38
[ 18.350438][ T301] x21: ffffff80cecd1880 x20: 0000000000000000
[ 18.351198][ T301] x19: ffffff80c439f010 x18: ffffffc00a50d0c0
[ 18.351959][ T301] x17: ffffffffffffffff x16: 0000000000000004
[ 18.352719][ T301] x15: 0000000000000004 x14: ffffffd44eb5d420
[ 18.353480][ T301] x13: 0000000000000ad2 x12: 0000000000000003
[ 18.354241][ T301] x11: 00000000fffffad2 x10: c0000000fffffad2
[ 18.355003][ T301] x9 : a0d288d8d7142d00 x8 : a0d288d8d7142d00
[ 18.355763][ T301] x7 : ffffffd44c2bc640 x6 : 0000000000000000
[ 18.356524][ T301] x5 : 0000000000000080 x4 : 0000000000000001
[ 18.357284][ T301] x3 : 0000000000000000 x2 : 0000000000000005
[ 18.358045][ T301] x1 : 0000000000000000 x0 : 0000000000000000
[ 18.360208][ T301] Hardware name: MT6873 (DT)
[ 18.360771][ T301] Call trace:
[ 18.361168][ T301] dump_backtrace+0xf8/0x1f0
[ 18.361737][ T301] dump_stack_lvl+0xa8/0x11c
[ 18.362305][ T301] dump_stack+0x1c/0x2c
[ 18.362816][ T301] mrdump_common_die+0x184/0x40c [mrdump]
[ 18.363575][ T301] ipanic_die+0x24/0x38 [mrdump]
[ 18.364230][ T301] atomic_notifier_call_chain+0x128/0x2b8
[ 18.364937][ T301] die+0x16c/0x568
[ 18.365394][ T301] __do_kernel_fault+0x1e8/0x214
[ 18.365402][ T301] do_page_fault+0xb8/0x678
[ 18.366934][ T301] do_translation_fault+0x48/0x64
[ 18.368645][ T301] do_mem_abort+0x68/0x148
[ 18.368652][ T301] el1_abort+0x40/0x64
[ 18.368660][ T301] el1h_64_sync_handler+0x54/0x88
[ 18.368668][ T301] el1h_64_sync+0x68/0x6c
[ 18.368673][ T301] mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu]
...
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Yong Wu <yong.wu@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 635319a4a744 ("media: iommu/mediatek: Add device_link between the consumer and the larb devices")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220505132731.21628-1-miles.chen@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add h264 decode driver to support mt8186. For the architecture
is single core, need to add new interface to decode.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Once the group enters 'owned' mode it can never be assigned back to the
default_domain or to a NULL domain. It must always be actively assigned to
a current domain. If the caller hasn't provided a domain then the core
must provide an explicit DMA blocking domain that has no DMA map.
Lazily create a group-global blocking DMA domain when
iommu_group_claim_dma_owner is first called and immediately assign the
group to it. This ensures that DMA is immediately fully isolated on all
IOMMU drivers.
If the user attaches/detaches while owned then detach will set the group
back to the blocking domain.
Slightly reorganize the call chains so that
__iommu_group_set_core_domain() is the function that removes any caller
configured domain and sets the domains back a core owned domain with an
appropriate lifetime.
__iommu_group_set_domain() is the worker function that can change the
domain assigned to a group to any target domain, including NULL.
Add comments clarifying how the NULL vs detach_dev vs default_domain works
based on Robin's remarks.
This fixes an oops with VFIO and SMMUv3 because VFIO will call
iommu_detach_group() and then immediately iommu_domain_free(), but
SMMUv3 has no way to know that the domain it is holding a pointer to
has been freed. Now the iommu_detach_group() will assign the blocking
domain and SMMUv3 will no longer hold a stale domain reference.
Fixes: 1ea2a07a532b ("iommu: Add DMA ownership management interfaces")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Tested-by: Baolu Lu <baolu.lu@linux.intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Co-developed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
--
Just minor polishing as discussed
v3:
- Change names to __iommu_group_set_domain() /
__iommu_group_set_core_domain()
- Clarify comments
- Call __iommu_group_set_domain() directly in
iommu_group_release_dma_owner() since we know it is always selecting
the default_domain
- Remove redundant detach_dev ops check in __iommu_detach_device and
make the added WARN_ON fail instead
- Check for blocking_domain in __iommu_attach_group() so VFIO can
actually attach a new group
- Update comments and spelling
- Fix missed change to new_domain in iommu_group_do_detach_device()
v2: https://lore.kernel.org/r/0-v2-f62259511ac0+6-iommu_dma_block_jgg@nvidia.com
v1: https://lore.kernel.org/r/0-v1-6e9d2d0a759d+11b-iommu_dma_block_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v3-db7f0785022b+149-iommu_dma_block_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Adds MT8186's compatible "mediatek,mt8186-vcodec-dec".
Adds MT8186's device private data mtk_vdec_single_core_pdata.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
If the driver support subdev mode, the parameter "dev->pm.dev" will be
NULL in mtk_vcodec_dec_remove. Kernel will crash when try to rmmod
mtk-vcodec-dec.ko.
[ 4380.702726] pc : do_raw_spin_trylock+0x4/0x80
[ 4380.707075] lr : _raw_spin_lock_irq+0x90/0x14c
[ 4380.711509] sp : ffff80000819bc10
[ 4380.714811] x29: ffff80000819bc10 x28: ffff3600c03e4000 x27: 0000000000000000
[ 4380.721934] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 4380.729057] x23: ffff3600c0f34930 x22: ffffd5e923549000 x21: 0000000000000220
[ 4380.736179] x20: 0000000000000208 x19: ffffd5e9213e8ebc x18: 0000000000000020
[ 4380.743298] x17: 0000002000000000 x16: ffffd5e9213e8e90 x15: 696c346f65646976
[ 4380.750420] x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000040
[ 4380.757542] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[ 4380.764664] x8 : 0000000000000000 x7 : ffff3600c7273ae8 x6 : ffffd5e9213e8ebc
[ 4380.771786] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
[ 4380.778908] x2 : 0000000000000000 x1 : ffff3600c03e4000 x0 : 0000000000000208
[ 4380.786031] Call trace:
[ 4380.788465] do_raw_spin_trylock+0x4/0x80
[ 4380.792462] __pm_runtime_disable+0x2c/0x1b0
[ 4380.796723] mtk_vcodec_dec_remove+0x5c/0xa0 [mtk_vcodec_dec]
[ 4380.802466] platform_remove+0x2c/0x60
[ 4380.806204] __device_release_driver+0x194/0x250
[ 4380.810810] driver_detach+0xc8/0x15c
[ 4380.814462] bus_remove_driver+0x5c/0xb0
[ 4380.818375] driver_unregister+0x34/0x64
[ 4380.822288] platform_driver_unregister+0x18/0x24
[ 4380.826979] mtk_vcodec_dec_driver_exit+0x1c/0x888 [mtk_vcodec_dec]
[ 4380.833240] __arm64_sys_delete_module+0x190/0x224
[ 4380.838020] invoke_syscall+0x48/0x114
[ 4380.841760] el0_svc_common.constprop.0+0x60/0x11c
[ 4380.846540] do_el0_svc+0x28/0x90
[ 4380.849844] el0_svc+0x4c/0x100
[ 4380.852975] el0t_64_sync_handler+0xec/0xf0
[ 4380.857148] el0t_64_sync+0x190/0x194
[ 4380.860801] Code: 94431515 17ffffca d503201f d503245f (b9400004)
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add support for VP9 decoding using the stateless API,
as supported by MT8192. And the drivers is lat and core architecture.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: George Sun <george.sun@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add support for VP8 decoding using the stateless API,
as supported by MT8192.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Adds h264 lat and core architecture driver for mt8192,
and the decode mode is frame based for stateless decoder.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Mt8192 can use some of common code with mt8183. Moves them to
a new file in order to reuse.
[hverkuil: replaced memcpy_toio by memcpy, was left over from a prev version]
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The capture queue format type may be differ depending on platform: for
stateless decoder drivers, we need to calculate the capture buffer size
according to the capture queue format type in SCP.
As a preparation for introducing drivers for stateless decoding, save the
current capture queue type on a per vcodec context basis.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Need to use default pic info when get pic info fail.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Steve Cho <stevecho@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
For vp8 not support 4K, need to disable it.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
