summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-03-11media: aspeed: fix clock handling logicJae Hyun Yoo
Video engine uses eclk and vclk for its clock sources and its reset control is coupled with eclk so the current clock enabling sequence works like below. Enable eclk De-assert Video Engine reset 10ms delay Enable vclk It introduces improper reset on the Video Engine hardware and eventually the hardware generates unexpected DMA memory transfers that can corrupt memory region in random and sporadic patterns. This issue is observed very rarely on some specific AST2500 SoCs but it causes a critical kernel panic with making a various shape of signature so it's extremely hard to debug. Moreover, the issue is observed even when the video engine is not actively used because udevd turns on the video engine hardware for a short time to make a query in every boot. To fix this issue, this commit changes the clock handling logic to make the reset de-assertion triggered after enabling both eclk and vclk. Also, it adds clk_unprepare call for a case when probe fails. clk: ast2600: fix reset settings for eclk and vclk Video engine reset setting should be coupled with eclk to match it with the setting for previous Aspeed SoCs which is defined in clk-aspeed.c since all Aspeed SoCs are sharing a single video engine driver. Also, reset bit 6 is defined as 'Video Engine' reset in datasheet so it should be de-asserted when eclk is enabled. This commit fixes the setting. Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver") Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Eddie James <eajames@linux.ibm.com> Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC") Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: rkisp1: rsz: crash fix when setting src formatDafna Hirschfeld
When setting the source media bus code in the resizer, we first check that the current media bus code in the source is yuv encoded format. This is done by retrieving the data from the formats list of the isp entity. This cause a crash when the media bus code on the source is YUYV8_1_5X8 which is not supported by the isp entity. Instead we should test the sink format of the resizer which is guaranteed to be supported by the isp entity. Fixes: 251b6eebb6c49 ("media: staging: rkisp1: rsz: Add support to more YUV encoded mbus codes on src pad") Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Tested-by: Sebastian Fricke <sebastian.fricke.linux@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: b2c2: remove trailing semicolon in macro definitionTom Rix
The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: omap4iss: return error code when omap4iss_get() failedYang Yingliang
If omap4iss_get() failed, it need return error code in iss_probe(). Fixes: 59f0ad807681 ("[media] v4l: omap4iss: Add support for OMAP4...") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: media/siano: kill pointless kmutex definitionsDavidlohr Bueso
Use the mutex api instead of renaming the calls for this driver. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: ngene: simplify the return expression of eeprom_write_ushort()Qinglang Miao
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: anysee: simplify the return expression of anysee_ci_* functionLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: saa7146: use sg_dma_len when building pgtableTasos Sahanidis
The new AMD IOMMU DMA implementation concatenates sglist entries under certain conditions, and because saa7146 accessed the length member directly, it did not support this scenario. This fixes IO_PAGE_FAULTs by using the sg_dma_len macro. Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: saa7134: use sg_dma_len when building pgtableTasos Sahanidis
The new AMD IOMMU DMA implementation concatenates sglist entries under certain conditions, and because saa7134 accessed the length member directly, it did not support this scenario. This fixes IO_PAGE_FAULTs and choppy DMA audio by using the sg_dma_len macro. Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: fix incorrect kernel doc usagesHans Verkuil
This patch fixes the following trivial warnings w.r.t. kernel-doc usage: drivers/media/common/videobuf2/frame_vector.c:38: warning: Excess function parameter 'gup_flags' description in 'get_vaddr_frames' drivers/media/dvb-core/dvb_ca_en50221.c:193: warning: wrong kernel-doc identifier on line: drivers/media/dvb-core/dvb_ca_en50221.c:1014: warning: expecting prototype for Wake up the DVB CA thread(). Prototype was for dvb_ca_en50221_thread_wakeup() instead drivers/media/dvb-core/dvb_ca_en50221.c:1023: warning: wrong kernel-doc identifier on line: drivers/media/dvb-core/dvb_ca_en50221.c:1081: warning: wrong kernel-doc identifier on line: drivers/media/dvb-core/dvb_ca_en50221.c:1112: warning: wrong kernel-doc identifier on line: drivers/media/dvb-core/dvb_ca_en50221.c:1327: warning: wrong kernel-doc identifier on line: drivers/media/dvb-core/dvb_ca_en50221.c:1411: warning: wrong kernel-doc identifier on line: drivers/media/dvb-core/dvb_ca_en50221.c:1426: warning: wrong kernel-doc identifier on line: drivers/media/dvb-core/dvb_ca_en50221.c:1582: warning: wrong kernel-doc identifier on line: drivers/media/dvb-core/dvb_ca_en50221.c:1693: warning: wrong kernel-doc identifier on line: drivers/media/dvb-core/dvb_ca_en50221.c:1743: warning: wrong kernel-doc identifier on line: drivers/media/dvb-core/dvb_ca_en50221.c:1772: warning: wrong kernel-doc identifier on line: drivers/media/dvb-core/dvb_ca_en50221.c:1830: warning: wrong kernel-doc identifier on line: drivers/media/dvb-core/dvb_ca_en50221.c:1922: warning: wrong kernel-doc identifier on line: drivers/media/rc/img-ir/img-ir-hw.c:628: warning: expecting prototype for img_ir_decoder_compatable(). Prototype was for img_ir_decoder_compatible() instead drivers/media/v4l2-core/v4l2-jpeg.c:461: warning: expecting prototype for jpeg_parse_header(). Prototype was for v4l2_jpeg_parse_header() instead drivers/media/platform/vsp1/vsp1_dl.c:166: warning: expecting prototype for struct vsp1_cmd_pool. Prototype was for struct vsp1_dl_cmd_pool instead drivers/media/platform/mtk-vpu/mtk_vpu.c:28: warning: expecting prototype for is a tiny processor controlling video hardware(). Prototype was for INIT_TIMEOUT_MS() instead drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c:73: warning: expecting prototype for struct vp9_fb_info. Prototype was for struct vp9_ref_buf instead drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c:85: warning: expecting prototype for struct vp9_fb_info. Prototype was for struct vp9_sf_ref_fb instead drivers/media/tuners/mt2063.c:1404: warning: expecting prototype for fLO_FractionalTerm(). Prototype was for MT2063_fLO_FractionalTerm() instead drivers/media/tuners/mt2063.c:1465: warning: expecting prototype for CalcLO2Mult(). Prototype was for MT2063_CalcLO2Mult() instead drivers/media/usb/pwc/pwc-dec23.c:640: warning: wrong kernel-doc identifier on line: drivers/media/platform/exynos4-is/media-dev.c:820: warning: expecting prototype for __fimc_md_create_fimc_links(). Prototype was for __fimc_md_create_fimc_sink_links() instead drivers/media/i2c/s5k6aa.c:426: warning: expecting prototype for s5k6aa_configure_pixel_clock(). Prototype was for s5k6aa_configure_pixel_clocks() instead drivers/media/i2c/imx274.c:700: warning: wrong kernel-doc identifier on line: drivers/media/i2c/imx274.c:735: warning: wrong kernel-doc identifier on line: drivers/media/i2c/imx274.c:983: warning: wrong kernel-doc identifier on line: Most are missing or mistyped function names. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: vivid: fix assignment of dev->fbuf_out_flagsColin Ian King
Currently the chroma_flags and alpha_flags are being zero'd with a bit-wise mask and the following statement should be bit-wise or'ing in the new flag bits but instead is making a direct assignment. Fix this by using the |= operator rather than an assignment. Addresses-Coverity: ("Unused value") Fixes: ef834f7836ec ("[media] vivid: add the video capture and output parts") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: ti-vpe: Simplify bool comparisonJiapeng Chong
Fix the following coccicheck warning: ./drivers/media/platform/ti-vpe/vpdma.c:946:5-26: WARNING: Comparison to bool. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: cec-notifier: also search for HDMI devices on I2CJohan Fjeldtvedt
Currently the cec_notifier_parse_hdmi_phandle function can only be used if the HDMI device associated with the CEC device is a platform device. Extend the function to cover I2C devices as well, as there do exist some I2C HDMI devices which don't handle CEC internally and need an external CEC adapter. [hverkuil: add missing linux/i2c.h header] [hverkuil: only attempt to find the i2c device if CONFIG_I2C is set] Signed-off-by: Johan Fjeldtvedt <johfjeld@cisco.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: drivers/media/usb: fix memory leak in zr364xx_probePavel Skripkin
syzbot reported memory leak in zr364xx_probe()[1]. The problem was in invalid error handling order. All error conditions rigth after v4l2_ctrl_handler_init() must call v4l2_ctrl_handler_free(). Reported-by: syzbot+efe9aefc31ae1e6f7675@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: rkisp1: params: remove extra 'if' conditionsDafna Hirschfeld
There is a repeating code pattern: if (a || b) { if (a) ... if (b) ... } In this pattern, the first 'if' is redundant. The code can be replaced with: if (a) ... if (b) ... Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: mtk: fix mtk-smi dependencyArnd Bergmann
The mtk-smi driver can now be built as a loadable module, but this leads to a build time regression when the drivers that depend on it are built-in: aarch64-linux-ld: drivers/media/platform/mtk-mdp/mtk_mdp_comp.o: in function `mtk_mdp_comp_clock_on': mtk_mdp_comp.c:(.text.mtk_mdp_comp_clock_on+0x54): undefined reference to `mtk_smi_larb_get' aarch64-linux-ld: drivers/media/platform/mtk-mdp/mtk_mdp_comp.o: in function `mtk_mdp_comp_clock_off': mtk_mdp_comp.c:(.text.mtk_mdp_comp_clock_off+0x12c): undefined reference to `mtk_smi_larb_put' Add a dependency on the interface, but keep allowing compile-testing without that driver, as it was originally intended. Fixes: 50fc8d9232cd ("memory: mtk-smi: Allow building as module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: drivers: media: pci: sta2x11: fix Kconfig dependency on GPIOLIBJulian Braha
When STA2X11_VIP is enabled, and GPIOLIB is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for VIDEO_ADV7180 Depends on [n]: MEDIA_SUPPORT [=y] && GPIOLIB [=n] && VIDEO_V4L2 [=y] && I2C [=y] Selected by [y]: - STA2X11_VIP [=y] && MEDIA_SUPPORT [=y] && MEDIA_PCI_SUPPORT [=y] && MEDIA_CAMERA_SUPPORT [=y] && PCI [=y] && VIDEO_V4L2 [=y] && VIRT_TO_BUS [=y] && I2C [=y] && (STA2X11 [=n] || COMPILE_TEST [=y]) && MEDIA_SUBDRV_AUTOSELECT [=y] This is because STA2X11_VIP selects VIDEO_ADV7180 without selecting or depending on GPIOLIB, despite VIDEO_ADV7180 depending on GPIOLIB. Signed-off-by: Julian Braha <julianbraha@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: media/usb:Remove superfluous "breaks" in the ttusb_dec.cdingsenjie
Remove superfluous "breaks", as there is a "return" before them. Signed-off-by: dingsenjie <dingsenjie@yulong.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: media/usb:Remove superfluous "breaks"dingsenjie
Remove superfluous "breaks", as there is a "return" before them. Signed-off-by: dingsenjie <dingsenjie@yulong.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: media/i2c: remove unneeded variable: "ret"zuoqilin
remove unneeded variable: "ret" Signed-off-by: zuoqilin <zuoqilin@yulong.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: solo6x10: Switch to using the new API kobj_to_dev()Yang Li
fixed the following coccicheck: ./drivers/media/pci/solo6x10/solo6x10-core.c:371:60-61: WARNING opportunity for kobj_to_dev() Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: qcom: camss: Fix overflows in clock rate calculationsVladimir Lypak
Because of u32 type being used to store pixel clock rate, expression used to calculate pipeline clocks (pixel_clock * bpp) produces wrong value due to integer overflow. This patch changes data type used to store, pass and retrieve pixel_clock from u32 to u64 to make this mistake less likely to be repeated in the future. Signed-off-by: Vladimir Lypak <junak.pub@gmail.com> Acked-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: camss: use v4l2_get_link_freq() to calculate the relevant clocksAndrey Konovalov
There are places in the camss driver where camss_get_pixel_clock() is called to get the pixel rate (using V4L2_CID_PIXEL_RATE control) and to calculate the link frequency from it. There is a case when this would not work: when V4L2_CID_PIXEL_RATE gets the rate at which the pixels are read (sampled) from the sensor's pixel array, and this rate is different from the pixel transmission rate over the CSI link, the link frequency value can't be calculated from the pixel rate. One needs to use V4L2_CID_LINK_FREQ to get the link frequency in this case. Replace such calls to camss_get_pixel_clock() with calls to a wrapper around v4l2_get_link_freq(). v4l2_get_link_freq() tries V4L2_CID_LINK_FREQ first, and if it is not implemented by the camera sensor driver, falls back to V4L2_CID_PIXEL_RATE to calculate the link frequency value from. Calls to camss_get_pixel_clock() from vfe_[check,set]_clock_rates() are left intact as it looks like this VFE clock does depend on the rate the pixel samples comes out of the camera sensor, not on the frequency at which the link between the sensor and the CSI receiver operates. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Acked-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: v4l: common: v4l2_get_link_freq: add printing a warningAndrey Konovalov
Print a warning if V4L2_CID_LINK_FREQ control is not implemented. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: drivers: media: pci: cx18: Spelling fix of minimze to minimize in the ↵Bhaskar Chowdhury
file cx18-av-audio.c s/minimze/minimize/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: drivers: media: pci: cx18: Couple of spell fixes in the file ↵Bhaskar Chowdhury
cx18-av-core.c s/minimze/minimize/ s/initallize/initialize/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: drivers/media/pci/cx18: Fix a spelling minimze to minimize in the ↵Bhaskar Chowdhury
file cx18-firmware.c s/minimze/minimize/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: use getter/setter functionsJulia Lawall
Use getter and setter functions, for a variety of data types. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: usbtv: constify static structsRikard Falkeborn
Constify two static structs which are never modified to allow the compiler to put them in read-only memory. The only usage of norm_params is only read from it in usbtv_configure_for_norm(). Making it const shrinks the resulting ko-file with 300 bytes (tested with gcc 10). The only usage of usbtv_ioctl_ops is to put its address to the ioctl_ops field in the video_device struct. Making it const moves ~1kb to read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: platform: sti: make a const arrays static, makes object smallerColin Ian King
Don't populate the const arrays on the stack but instead it static. Makes the object code smaller by 8 bytes: Before: text data bss dec hex filename 12504 4568 0 17072 42b0 media/platform/sti/hva/hva-h264.o After: text data bss dec hex filename 12272 4792 0 17064 42a8 media/platform/sti/hva/hva-h264.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: rc: add keymap for Xbox 360 Universal Media remoteBastien Nocera
Captured using a raw IR receiver. Manual linked in the remote definition itself. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: dvb-usb: Fix use-after-free accessTakashi Iwai
dvb_usb_device_init() copies the properties to the own data, so that the callers can release the original properties later (as done in the commit 299c7007e936 ("media: dw2102: Fix memleak on sequence of probes")). However, it also stores dev->desc pointer that is a reference to the original properties data. Since dev->desc is referred later, it may result in use-after-free, in the worst case, leading to a kernel Oops as reported. This patch addresses the problem by allocating and copying the properties at first, then get the desc from the copied properties. Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1181104 Reviewed-by: Robert Foss <robert.foss@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: dvb-usb: Fix memory leak at error in dvb_usb_device_init()Takashi Iwai
dvb_usb_device_init() allocates a dvb_usb_device object, but it doesn't release the object by itself even at errors. The object is released in the callee side (dvb_usb_init()) in some error cases via dvb_usb_exit() call, but it also missed the object free in other error paths. And, the caller (it's only dvb_usb_device_init()) doesn't seem caring the resource management as well, hence those memories are leaked. This patch assures releasing the memory at the error path in dvb_usb_device_init(). Now dvb_usb_init() frees the resources it allocated but leaves the passed dvb_usb_device object intact. In turn, the dvb_usb_device object is released in dvb_usb_device_init() instead. We could use dvb_usb_exit() function for releasing everything in the callee (as it was used for some error cases in the original code), but releasing the passed object in the callee is non-intuitive and error-prone. So I took this approach (which is more standard in Linus kernel code) although it ended with a bit more open codes. Along with the change, the patch makes sure that USB intfdata is reset and don't return the bogus pointer to the caller of dvb_usb_device_init() at the error path, too. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: em28xx: Add pid for bulk revision of Hauppauge 461eV2Brad Love
Manufacturing has switched from ISOC to bulk transport, the pid has accordingly changed to signify this. 0x2013:0x0461 is an ISOC 461e v2 0x2013:0x8461 is a bulk transport 461e v2 Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: em28xx: Add pid for bulk revision of Hauppauge 461eBrad Love
Manufacturing has switched from ISOC to bulk transport, the pid has accordingly changed to signify this. 0x2013:0x0258 is an ISOC 461e 0x2013:0x8258 is a bulk transport 461e Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: rc: add keymap for minix-neo remoteChristian Hewitt
Add a keymap and bindings for the simple IR (NEC) remote used with Minix 'NEO' branded Android STB devices. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: ite-cir: in_use is not neededSean Young
The in_use variable is set to true when a lirc file is opened, and ir transmit can only be done by writing to a lirc file descriptor. As a result when in_use is read, it is always true, so we might as well remove it. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: ite-cir: check for receive overflowSean Young
It's best if this condition is reported. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: ite-cir: move runtime information into driver dataSean Young
The carrier, duty cycle etc are not device dependent, and they can be changed at runtime. By moving them into the allocated struct, we can make the device specific structures smaller, and we no longer need to copy the struct. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: ite-cir: carrier and duty cycle can be set via ioctlSean Young
The lirc ioctls should be used for this, not module parameters. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: ite-cir: use standard logging and reduce noiseSean Young
Remove lots of superfluous debug messages which just log the function name. Also, there is no need to announce the various parameters of the device. This can be discovered via lirc ioctl if needed. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: ite-cir: set parent deviceSean Young
This ensure that the rc device shows up correctly in sysfs. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: ite-cir: remove unused fieldsSean Young
These fields are not referenced anywhere. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: rc/ite-cir: replace spin_lock_irqsave by spin_lock in hard IRQDaode Huang
It is redundant to do irqsave and irqrestore in hardIRQ context. Signed-off-by: Daode Huang <huangdaode@huawei.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Nothing special here, though Bob's regression fixes for rxe would have made it before the rc cycle had there not been such strong winter weather! - Fix corner cases in the rxe reference counting cleanup that are causing regressions in blktests for SRP - Two kdoc fixes so W=1 is clean - Missing error return in error unwind for mlx5 - Wrong lock type nesting in IB CM" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Fix errant WARN_ONCE in rxe_completer() RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt() RDMA/rxe: Fix missed IB reference counting in loopback RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc RDMA/mlx5: Set correct kernel-doc identifier IB/mlx5: Add missing error code RDMA/rxe: Fix missing kconfig dependency on CRYPTO RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep
2021-03-05Merge tag 'for-5.12/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Fix DM verity target's optional Forward Error Correction (FEC) for Reed-Solomon roots that are unaligned to block size" * tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm verity: fix FEC for RS roots unaligned to block size dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
2021-03-05Merge tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe fixes: - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal Terjan) - fix a hwmon error return (Daniel Wagner) - fix the keep alive timeout initialization (Martin George) - ensure the model_number can't be changed on a used subsystem (Max Gurtovoy) - rsxx missing -EFAULT on copy_to_user() failure (Dan) - rsxx remove unused linux.h include (Tian) - kill unused RQF_SORTED (Jean) - updated outdated BFQ comments (Joseph) - revert work-around commit for bd_size_lock, since we removed the offending user in this merge window (Damien) * tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block: nvmet: model_number must be immutable once set nvme-fabrics: fix kato initialization nvme-hwmon: Return error code when registration fails nvme-pci: add quirks for Lexar 256GB SSD nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST. rsxx: Return -EFAULT if copy_to_user() fails block/bfq: update comments and default value in docs for fifo_expire rsxx: remove unused including <linux/version.h> block: Drop leftover references to RQF_SORTED block: revert "block: fix bd_size_lock use"
2021-03-05Merge tag 'pm-5.12-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix the usage of device links in the runtime PM core code and update the DTPM (Dynamic Thermal Power Management) feature added recently. Specifics: - Make the runtime PM core code avoid attempting to suspend supplier devices before updating the PM-runtime status of a consumer to 'suspended' (Rafael Wysocki). - Fix DTPM (Dynamic Thermal Power Management) root node initialization and label that feature as EXPERIMENTAL in Kconfig (Daniel Lezcano)" * tag 'pm-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap/drivers/dtpm: Add the experimental label to the option description powercap/drivers/dtpm: Fix root node initialization PM: runtime: Update device status before letting suppliers suspend
2021-03-05Merge tag 'iommu-fixes-v5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Fix a sleeping-while-atomic issue in the AMD IOMMU code - Disable lazy IOTLB flush for untrusted devices in the Intel VT-d driver - Fix status code definitions for Intel VT-d - Fix IO Page Fault issue in Tegra IOMMU driver * tag 'iommu-fixes-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix status code for Allocate/Free PASID command iommu: Don't use lazy flush for untrusted device iommu/tegra-smmu: Fix mc errors on tegra124-nyan iommu/amd: Fix sleeping in atomic in increase_address_space()
2021-03-05RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()Bob Pearson
In rxe_comp.c in rxe_completer() the function free_pkt() did not clear skb which triggered a warning at 'done:' and could possibly at 'exit:'. The WARN_ONCE() calls are not actually needed. The call to free_pkt() is moved to the end to clearly show that all skbs are freed. Fixes: 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()") Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-16 17:15:39 +0000