| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Assorted fixes for the OP-TEE based pseudo-EFI variable store
- Fix for an OOB access when looking up the same non-existing efivarfs
entry multiple times in parallel
* tag 'efi-fixes-for-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: Fix slab-out-of-bounds in efivarfs_d_compare
efi: stmm: Drop unneeded null pointer check
efi: stmm: Drop unused EFI error from setup_mm_hdr arguments
efi: stmm: Do not return EFI_OUT_OF_RESOURCES on internal errors
efi: stmm: Fix incorrect buffer allocation method
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fixes for memory corruption in intel-thc-hid, hid-multitouch,
hid-mcp2221 and hid-asus (Aaron Ma, Qasim Ijaz, Arnaud Lecomte)
- power management/resume fix for intel-ish-hid (Zhang Lixu)
- driver reinitialization fix for intel-thc-hid (Even Xu)
- ensure that battery level status is reported as soon as possible,
which is required at least for some Android use-cases (José Expósito)
- quite a few new device ID additions and device-specific quirks
* tag 'hid-for-linus-2025082901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: quirks: add support for Legion Go dual dinput modes
HID: elecom: add support for ELECOM M-DT2DRBK
HID: logitech: Add ids for G PRO 2 LIGHTSPEED
HID: input: report battery status changes immediately
HID: input: rename hidinput_set_battery_charge_status()
HID: intel-thc-hid: Intel-quicki2c: Enhance driver re-install flow
HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version()
HID: asus: fix UAF via HID_CLAIMED_INPUT validation
hid: fix I2C read buffer overflow in raw_event() for mcp2221
HID: wacom: Add a new Art Pen 2
HID: multitouch: fix slab out-of-bounds access in mt_report_fixup()
HID: Kconfig: Fix spelling mistake "enthropy" -> "entropy"
HID: intel-ish-hid: Increase ISHTP resume ack timeout to 300ms
HID: intel-thc-hid: intel-thc: Fix incorrect pointer arithmetic in I2C regs save
HID: intel-thc-hid: intel-quicki2c: Fix ACPI dsd ICRS/ISUB length
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One simple fix for the pm8008 driver for poor error handling,
switching to use a helper which does the right thing in the
affected case"
* tag 'regulator-fix-v6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: pm8008: fix probe failure due to negative voltage selector
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix the type of return values to be signed in the ahci_xgen driver
(Qianfeng)
- Add the mask_port_ext module parameter to the ahci driver.
This is to allow a user to ignore ports that are advertized as
external (hotplug capable) in favor of lower link power management
policies instead of the default max_performance for these ports.
This is useful to allow e.g. laptops to go into low power states when
hooked up to docking station with sata slots, connected with an
external port for hotplug (me)
* tag 'ata-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci_xgene: Use int type for 'rc' to store error codes
ata: ahci: Allow ignoring the external/hotplug capability of ports
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, feels a bit big.
The major piece is msm fixes, then the usual amdgpu/xe along with some
mediatek and nouveau fixes and a tegra revert.
gpuvm:
- fix some typos
xe:
- Fix user-fence race issue
- Couple xe_vm fixes
- Don't trigger rebind on initial dma-buf validation
- Fix a build issue related to basename() posix vs gnu discrepancy
amdgpu:
- pin buffers while vmapping
- UserQ fixes
- Revert CSA fix
- SR-IOV fix
nouveau:
- fix linear modifier
- remove some dead code
msm:
- Core/GPU:
- fix comment doc warning in gpuvm
- fix build with KMS disabled
- fix pgtable setup/teardown race
- global fault counter fix
- various error path fixes
- GPU devcoredump snapshot fixes
- handle in-place VM_BIND remaps to solve turnip vm update race
- skip re-emitting IBs for unusable VMs
- Don't use %pK through printk
- moved display snapshot init earlier, fixing a crash
- DPU:
- Fixed crash in virtual plane checking code
- Fixed mode comparison in virtual plane checking code
- DSI:
- Adjusted width of resulution-related registers
- Fixed locking issue on 14nm PLLs
- UBWC (per Bjorn's ack)
- Added UBWC configuration for several missing platforms (fixing
regression)
mediatek:
- Add error handling for old state CRTC in atomic_disable
- Fix DSI host and panel bridge pre-enable order
- Fix device/node reference count leaks in mtk_drm_get_all_drm_priv
- mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
tegra:
- revert dma-buf change"
* tag 'drm-fixes-2025-08-29' of https://gitlab.freedesktop.org/drm/kernel: (56 commits)
drm/mediatek: mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
drm/amdgpu/userq: fix error handling of invalid doorbell
drm/amdgpu: update firmware version checks for user queue support
drm/amd/amdgpu: disable hwmon power1_cap* for gfx 11.0.3 on vf mode
Revert "drm/amdgpu: fix incorrect vm flags to map bo"
drm/amdgpu/gfx12: set MQD as appriopriate for queue types
drm/amdgpu/gfx11: set MQD as appriopriate for queue types
drm/xe: switch to local xbasename() helper
drm/xe: Don't trigger rebind on initial dma-buf validation
drm/xe/vm: Clear the scratch_pt pointer on error
drm/xe/vm: Don't pin the vm_resv during validation
drm/xe/xe_sync: avoid race during ufence signaling
Revert "drm/tegra: Use dma_buf from GEM object instance"
soc: qcom: use no-UBWC config for MSM8956/76
soc: qcom: add configuration for MSM8929
soc: qcom: ubwc: add more missing platforms
soc: qcom: ubwc: use no-uwbc config for MSM8917
drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset
dt-bindings: display/msm: qcom,mdp5: drop lut clock
drm/gpuvm: fix various typos in .c and .h gpuvm file
...
|
|
Pull block fixes from Jens Axboe:
- Fix a lockdep spotted issue on recursive locking for zoned writes, in
case of errors
- Update bcache MAINTAINERS entry address for Coly
- Fix for a ublk release issue, with selftests
- Fix for a regression introduced in this cycle, where it assumed
q->rq_qos was always set if the bio flag indicated that
- Fix for a regression introduced in this cycle, where loop retrieving
block device sizes got broken
* tag 'block-6.17-20250828' of git://git.kernel.dk/linux:
bcache: change maintainer's email address
ublk selftests: add --no_ublk_fixed_fd for not using registered ublk char device
ublk: avoid ublk_io_release() called after ublk char dev is closed
block: validate QoS before calling __rq_qos_done_bio()
blk-zoned: Fix a lockdep complaint about recursive locking
loop: fix zero sized loop for block special file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth.
Current release - regressions:
- ipv4: fix regression in local-broadcast routes
- vsock: fix error-handling regression introduced in v6.17-rc1
Previous releases - regressions:
- bluetooth:
- mark connection as closed during suspend disconnect
- fix set_local_name race condition
- eth:
- ice: fix NULL pointer dereference on reset
- mlx5: fix memory leak in hws_pool_buddy_init error path
- bnxt_en: fix stats context reservation logic
- hv: fix loss of receive events from host during channel open
Previous releases - always broken:
- page_pool: fix incorrect mp_ops error handling
- sctp: initialize more fields in sctp_v6_from_sk()
- eth:
- octeontx2-vf: fix max packet length errors
- idpf: fix Tx flow scheduling to avoid Tx timeouts
- bnxt_en: fix memory corruption during ifdown
- ice: fix incorrect counter for buffer allocation failures
- mlx5: fix lockdep assertion on sync reset unload event
- fbnic: fixup rtnl_lock and devl_lock handling
- xgmac: do not enable RX FIFO overflow interrupts
- phy: mscc: fix when PTP clock is register and unregister
Misc:
- add Telit Cinterion LE910C4-WWX new compositions"
* tag 'net-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
net: ipv4: fix regression in local-broadcast routes
net: macb: Disable clocks once
fbnic: Move phylink resume out of service_task and into open/close
fbnic: Fixup rtnl_lock and devl_lock handling related to mailbox code
net: rose: fix a typo in rose_clear_routes()
l2tp: do not use sock_hold() in pppol2tp_session_get_sock()
sctp: initialize more fields in sctp_v6_from_sk()
MAINTAINERS: rmnet: Update email addresses
net: rose: include node references in rose_neigh refcount
net: rose: convert 'use' field to refcount_t
net: rose: split remove and free operations in rose_remove_neigh()
net: hv_netvsc: fix loss of early receive events from host during channel open.
net: stmmac: Set CIC bit only for TX queues with COE
net: stmmac: xgmac: Correct supported speed modes
net: stmmac: xgmac: Do not enable RX FIFO Overflow interrupts
net/mlx5e: Set local Xoff after FW update
net/mlx5e: Update and set Xon/Xoff upon port speed set
net/mlx5e: Update and set Xon/Xoff upon MTU set
net/mlx5: Prevent flow steering mode changes in switchdev mode
net/mlx5: Nack sync reset when SFs are present
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20250829
1. Add error handling for old state CRTC in atomic_disable
2. Fix DSI host and panel bridge pre-enable order
3. Fix device/node reference count leaks in mtk_drm_get_all_drm_priv
4. mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20250828234116.4960-1-chunkuang.hu@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Add missing locking annotations to two recently introduced
list_for_each_entry_rcu() loops in the core device suspend/resume
code (Johannes Berg)"
* tag 'pm-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: annotate RCU list iterations
|
|
In mtk_hdmi driver, a recent change replaced custom register access
function calls by regmap ones, but two replacements by regmap_update_bits
were done incorrectly, because original offset and mask parameters were
inverted, so fix them.
Fixes: d6e25b3590a0 ("drm/mediatek: hdmi: Use regmap instead of iomem for main registers")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250818-mt8173-fix-hdmi-issue-v1-1-55aff9b0295d@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.17-rc4
Core/GPU:
- fix comment doc warning in gpuvm
- fix build with KMS disabled
- fix pgtable setup/teardown race
- global fault counter fix
- various error path fixes
- GPU devcoredump snapshot fixes
- handle in-place VM_BIND remaps to solve turnip vm update race
- skip re-emitting IBs for unusable VMs
- Don't use %pK through printk
- moved display snapshot init earlier, fixing a crash
DPU:
- Fixed crash in virtual plane checking code
- Fixed mode comparison in virtual plane checking code
DSI:
- Adjusted width of resulution-related registers
- Fixed locking issue on 14nm PLLs
UBWC (per Bjorn's ack)
- Added UBWC configuration for several missing platforms (fixing
regression)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://lore.kernel.org/r/CACSVV02+u1VW1dzuz6JWwVEfpgTj6Y-JXMH+vX43KsKTVsW+Yg@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- another small fix for arm64 systems with memory encryption (Shanker
Donthineni)
- fix for arm32 systems with non-standard CMA configuration (Oreoluwa
Babatunde)
* tag 'dma-mapping-6.17-2025-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma/pool: Ensure DMA_DIRECT_REMAP allocations are decrypted
of: reserved_mem: Restructure call site for dma_contiguous_early_fixup()
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.17-2025-08-28:
amdgpu:
- UserQ fixes
- Revert CSA fix
- SR-IOV fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250828173904.75850-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Several nouveau fixes to remove unused code, fix an error path and be
less restrictive with the formats it accepts. A fix for amdgpu to pin
vmapped dma-buf, and a revert for tegra for a regression in the dma-buf
/ GEM code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250828-hypersonic-colorful-squirrel-64f04b@houat
|
|
When running test_stress_04.sh, the following warning is triggered:
WARNING: CPU: 1 PID: 135 at drivers/block/ublk_drv.c:1933 ublk_ch_release+0x423/0x4b0 [ublk_drv]
This happens when the daemon is abruptly killed:
- some references may still be held, because registering IO buffer
doesn't grab ublk char device reference
OR
- io->task_registered_buffers won't be cleared because io buffer is
released from non-daemon context
For zero-copy and auto buffer register modes, I/O reference crosses
syscalls, so IO reference may not be dropped naturally when ublk server is
killed abruptly. However, when releasing io_uring context, it is guaranteed
that the reference is dropped finally, see io_sqe_buffers_unregister() from
io_ring_ctx_free().
Fix this by adding ublk_drain_io_references() that:
- Waits for active I/O references dropped in async way by scheduling
work function, for avoiding ublk dev and io_uring file's release
dependency
- Reinitializes io->ref and io->task_registered_buffers to clean state
This ensures the reference count state is clean when ublk_queue_reinit()
is called, preventing the warning and potential use-after-free.
Fixes: 1f6540e2aabb ("ublk: zc register/unregister bvec")
Fixes: 1ceeedb59749 ("ublk: optimize UBLK_IO_UNREGISTER_IO_BUF on daemon task")
Fixes: 8a8fe42d765b ("ublk: optimize UBLK_IO_REGISTER_IO_BUF on daemon task")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250827121602.2619736-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the driver is removed the clocks are disabled twice: once in
macb_remove and a second time by runtime pm. Disable wakeup in remove so
all the clocks are disabled and skip the second call to macb_clks_disable.
Always suspend the device as we always set it active in probe.
Fixes: d54f89af6cc4 ("net: macb: Add pm runtime support")
Signed-off-by: Neil Mandir <neil.mandir@seco.com>
Co-developed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250826143022.935521-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use int instead of u32 for the 'rc' variable in xgene_ahci_softreset()
to store negative error codes returned by ahci_do_softreset().
In xgene_ahci_pmp_softreset(), remove the redundant 'rc' variable and
directly return the result of the ahci_do_softreset() call instead.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The fbnic driver was presenting with the following locking assert coming
out of a PM resume:
[ 42.208116][ T164] RTNL: assertion failed at drivers/net/phy/phylink.c (2611)
[ 42.208492][ T164] WARNING: CPU: 1 PID: 164 at drivers/net/phy/phylink.c:2611 phylink_resume+0x190/0x1e0
[ 42.208872][ T164] Modules linked in:
[ 42.209140][ T164] CPU: 1 UID: 0 PID: 164 Comm: bash Not tainted 6.17.0-rc2-virtme #134 PREEMPT(full)
[ 42.209496][ T164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 42.209861][ T164] RIP: 0010:phylink_resume+0x190/0x1e0
[ 42.210057][ T164] Code: 83 e5 01 0f 85 b0 fe ff ff c6 05 1c cd 3e 02 01 90 ba 33 0a 00 00 48 c7 c6 20 3a 1d a5 48 c7 c7 e0 3e 1d a5 e8 21 b8 90 fe 90 <0f> 0b 90 90 e9 86 fe ff ff e8 42 ea 1f ff e9 e2 fe ff ff 48 89 ef
[ 42.210708][ T164] RSP: 0018:ffffc90000affbd8 EFLAGS: 00010296
[ 42.210983][ T164] RAX: 0000000000000000 RBX: ffff8880078d8400 RCX: 0000000000000000
[ 42.211235][ T164] RDX: 0000000000000000 RSI: 1ffffffff4f10938 RDI: 0000000000000001
[ 42.211466][ T164] RBP: 0000000000000000 R08: ffffffffa2ae79ea R09: fffffbfff4b3eb84
[ 42.211707][ T164] R10: 0000000000000003 R11: 0000000000000000 R12: ffff888007ad8000
[ 42.211997][ T164] R13: 0000000000000002 R14: ffff888006a18800 R15: ffffffffa34c59e0
[ 42.212234][ T164] FS: 00007f0dc8e39740(0000) GS:ffff88808f51f000(0000) knlGS:0000000000000000
[ 42.212505][ T164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 42.212704][ T164] CR2: 00007f0dc8e9fe10 CR3: 000000000b56d003 CR4: 0000000000772ef0
[ 42.213227][ T164] PKRU: 55555554
[ 42.213366][ T164] Call Trace:
[ 42.213483][ T164] <TASK>
[ 42.213565][ T164] __fbnic_pm_attach.isra.0+0x8e/0xa0
[ 42.213725][ T164] pci_reset_function+0x116/0x1d0
[ 42.213895][ T164] reset_store+0xa0/0x100
[ 42.214025][ T164] ? pci_dev_reset_attr_is_visible+0x50/0x50
[ 42.214221][ T164] ? sysfs_file_kobj+0xc1/0x1e0
[ 42.214374][ T164] ? sysfs_kf_write+0x65/0x160
[ 42.214526][ T164] kernfs_fop_write_iter+0x2f8/0x4c0
[ 42.214677][ T164] ? kernfs_vma_page_mkwrite+0x1f0/0x1f0
[ 42.214836][ T164] new_sync_write+0x308/0x6f0
[ 42.214987][ T164] ? __lock_acquire+0x34c/0x740
[ 42.215135][ T164] ? new_sync_read+0x6f0/0x6f0
[ 42.215288][ T164] ? lock_acquire.part.0+0xbc/0x260
[ 42.215440][ T164] ? ksys_write+0xff/0x200
[ 42.215590][ T164] ? perf_trace_sched_switch+0x6d0/0x6d0
[ 42.215742][ T164] vfs_write+0x65e/0xbb0
[ 42.215876][ T164] ksys_write+0xff/0x200
[ 42.215994][ T164] ? __ia32_sys_read+0xc0/0xc0
[ 42.216141][ T164] ? do_user_addr_fault+0x269/0x9f0
[ 42.216292][ T164] ? rcu_is_watching+0x15/0xd0
[ 42.216442][ T164] do_syscall_64+0xbb/0x360
[ 42.216591][ T164] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 42.216784][ T164] RIP: 0033:0x7f0dc8ea9986
A bit of digging showed that we were invoking the phylink_resume as a part
of the fbnic_up path when we were enabling the service task while not
holding the RTNL lock. We should be enabling this sooner as a part of the
ndo_open path and then just letting the service task come online later.
This will help to enforce the correct locking and brings the phylink
interface online at the same time as the network interface, instead of at a
later time.
I tested this on QEMU to verify this was working by putting the system to
sleep using "echo mem > /sys/power/state" to put the system to sleep in the
guest and then using the command "system_wakeup" in the QEMU monitor.
Fixes: 69684376eed5 ("eth: fbnic: Add link detection")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/175616257316.1963577.12238158800417771119.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The exception handling path for the __fbnic_pm_resume function had a bug in
that it was taking the devlink lock and then exiting to exception handling
instead of waiting until after it released the lock to do so. In order to
handle that I am swapping the placement of the unlock and the exception
handling jump to label so that we don't trigger a deadlock by holding the
lock longer than we need to.
In addition this change applies the same ordering to the rtnl_lock/unlock
calls in the same function as it should make the code easier to follow if
it adheres to a consistent pattern.
Fixes: 82534f446daa ("eth: fbnic: Add devlink dev flash support")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/175616256667.1963577.5543500806256052549.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the doorbell is invalid, be sure to set the r to an error
state so the function returns an error.
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7e2a5b0a9a165a7c51274aa01b18be29491b4345)
Cc: stable@vger.kernel.org
|
|
The minimum firmware versions required for user queue functionality
have been increased to address an issue where the queue privilege
state was lost during queue connect operations.
The problem occurred because the privilege state was being restored
to its initial value at the beginning of the function, overwriting
the state that was properly set during the queue connect case.
This commit updates the minimum version requirements:
- ME firmware from 2390 to 2420
- PFP firmware from 2530 to 2580
- MEC firmware from 2600 to 2650
- MES firmware remains at 120
These updated firmware versions contain the necessary fixes to
properly maintain queue privilege state throughout connect operations.
Fixes: 61ca97e9590c ("drm/amdgpu: Add fw minimum version check for usermode queue")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5f976c9939f0d5916d2b8ef3156a6d1799781df1)
Cc: stable@vger.kernel.org
|
|
the PPSMC_MSG_GetPptLimit msg is not valid for gfx 11.0.3 on vf mode,
so skiped to create power1_cap* hwmon sysfs node.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e82a8d441038d8cb10b63047a9e705c42479d156)
Cc: stable@vger.kernel.org
|
|
This reverts commit b08425fa77ad2f305fe57a33dceb456be03b653f.
Revert this to align with 6.17 because the fixes tag
was wrong on this commit.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit be33e8a239aac204d7e9e673c4220ef244eb1ba3)
|
|
Set the MQD as appropriate for the kernel vs user queues.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7b9110f2897957efd9715b52fc01986509729db3)
Cc: stable@vger.kernel.org
|
|
Set the MQD as appropriate for the kernel vs user queues.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 063d6683208722b1875f888a45084e3d112701ac)
Cc: stable@vger.kernel.org
|
|
Pull virtio/vhost fixes from Michael Tsirkin:
"More small fixes. Most notably this fixes a messed up ioctl number,
and a regression in shmem affecting drm users"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_net: adjust the execution order of function `virtnet_close` during freeze
virtio_input: Improve freeze handling
vhost: Fix ioctl # for VHOST_[GS]ET_FORK_FROM_OWNER
Revert "virtio: reject shm region if length is zero"
vhost/net: Protect ubufs with rcu read lock in vhost_net_ubuf_put()
virtio_pci: Fix misleading comment for queue vector
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- drop the redundant pm_runtime_mark_last_busy() in rkvdec
- fix probing error handling in rkvdec
- fix an issue affecting lt6911uxe/lt6911uxc related to CSI-2 GPIO pins
in int3472
* tag 'media/v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: Remove redundant pm_runtime_mark_last_busy() calls
platform/x86: int3472: add hpd pin support
media: rkvdec: Remove redundant pm_runtime_mark_last_busy() calls
media: rkvdec: Fix an error handling path in rkvdec_probe()
media: rkvdec: Fix a NULL vs IS_ERR() bug in probe()
|
|
The hv_netvsc driver currently enables NAPI after opening the primary and
subchannels. This ordering creates a race: if the Hyper-V host places data
in the host -> guest ring buffer and signals the channel before
napi_enable() has been called, the channel callback will run but
napi_schedule_prep() will return false. As a result, the NAPI poller never
gets scheduled, the data in the ring buffer is not consumed, and the
receive queue may remain permanently stuck until another interrupt happens
to arrive.
Fix this by enabling NAPI and registering it with the RX/TX queues before
vmbus channel is opened. This guarantees that any early host signal after
open will correctly trigger NAPI scheduling and the ring buffer will be
drained.
Fixes: 76bb5db5c749d ("netvsc: fix use after free on module removal")
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20250825115627.GA32189@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, in the AF_XDP transmit paths, the CIC bit of
TX Desc3 is set for all packets. Setting this bit for
packets transmitting through queues that don't support
checksum offloading causes the TX DMA to get stuck after
transmitting some packets. This patch ensures the CIC bit
of TX Desc3 is set only if the TX queue supports checksum
offloading.
Fixes: 132c32ee5bc0 ("net: stmmac: Add TX via XDP zero-copy socket")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-3-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct supported speed modes as per the XGMAC databook.
Commit 9cb54af214a7 ("net: stmmac: Fix IP-cores specific
MAC capabilities") removes support for 10M, 100M and
1000HD. 1000HD is not supported by XGMAC IP, but it does
support 10M and 100M FD mode for XGMAC version >= 2_20,
and it also supports 10M and 100M HD mode if the HDSEL bit
is set in the MAC_HW_FEATURE0 reg. This commit enables support
for 10M and 100M speed modes for XGMAC IP based on XGMAC
version and MAC capabilities.
Fixes: 9cb54af214a7 ("net: stmmac: Fix IP-cores specific MAC capabilities")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-2-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enabling RX FIFO Overflow interrupts is counterproductive
and causes an interrupt storm when RX FIFO overflows.
Disabling this interrupt has no side effect and eliminates
interrupt storms when the RX FIFO overflows.
Commit 8a7cb245cf28 ("net: stmmac: Do not enable RX FIFO
overflow interrupts") disables RX FIFO overflow interrupts
for DWMAC4 IP and removes the corresponding handling of
this interrupt. This patch is doing the same thing for
XGMAC IP.
Fixes: 2142754f8b9c ("net: stmmac: Add MAC related callbacks for XGMAC2")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-1-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The local Xoff value is being set before the firmware (FW) update.
In case of a failure where the FW is not updated with the new value,
there is no fallback to the previous value.
Update the local Xoff value after the FW has been successfully set.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-12-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Xon/Xoff sizes are derived from calculations that include
the port speed.
These settings need to be updated and applied whenever the
port speed is changed.
The port speed is typically set after the physical link goes down
and is negotiated as part of the link-up process between the two
connected interfaces.
Xon/Xoff parameters being updated at the point where the new
negotiated speed is established.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-11-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Xon/Xoff sizes are derived from calculation that include the MTU size.
Set Xon/Xoff when MTU is set.
If Xon/Xoff fails, set the previous MTU.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Changing flow steering modes is not allowed when eswitch is in switchdev
mode. This fix ensures that any steering mode change, including to
firmware steering, is correctly blocked while eswitch mode is switchdev.
Fixes: e890acd5ff18 ("net/mlx5: Add devlink flow_steering_mode parameter")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If PF (Physical Function) has SFs (Sub-Functions), since the SFs are not
taking part in the synchronization flow, sync reset can lead to fatal
error on the SFs, as the function will be closed unexpectedly from the
SF point of view.
Add a check to prevent sync reset when there are SFs on a PF device
which is not ECPF, as ECPF is teardowned gracefully before reset.
Fixes: 92501fa6e421 ("net/mlx5: Ack on sync_reset_request only if PF can do reset_now")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix lockdep assertion triggered during sync reset unload event. When the
sync reset flow is initiated using the devlink reload fw_activate
option, the PF already holds the devlink lock while handling unload
event. In this case, delegate sync reset unload event handling back to
the devlink callback process to avoid double-locking and resolve the
lockdep warning.
Kernel log:
WARNING: CPU: 9 PID: 1578 at devl_assert_locked+0x31/0x40
[...]
Call Trace:
<TASK>
mlx5_unload_one_devl_locked+0x2c/0xc0 [mlx5_core]
mlx5_sync_reset_unload_event+0xaf/0x2f0 [mlx5_core]
process_one_work+0x222/0x640
worker_thread+0x199/0x350
kthread+0x10b/0x230
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x8e/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: 7a9770f1bfea ("net/mlx5: Handle sync reset unload event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-7-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The devlink reload fw_activate command performs firmware activation
followed by driver reload, while devlink reload driver_reinit triggers
only driver reload. However, the driver reload logic differs between the
two modes, as on driver_reinit mode mlx5 also reloads auxiliary drivers,
while in fw_activate mode the auxiliary drivers are suspended where
applicable.
Additionally, following the cited commit, if the device has multiple PFs,
the behavior during fw_activate may vary between PFs: one PF may suspend
auxiliary drivers, while another reloads them.
Align devlink dev reload fw_activate behavior with devlink dev reload
driver_reinit, to reload all auxiliary drivers.
Fixes: 72ed5d5624af ("net/mlx5: Suspend auxiliary devices only in case of PCI device suspend")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mlx5hws_pat_get_pattern(), when mlx5hws_pat_add_pattern_to_cache()
fails, the function attempts to clean up the pattern created by
mlx5hws_cmd_header_modify_pattern_create(). However, it incorrectly
uses *pattern_id which hasn't been set yet, instead of the local
ptrn_id variable that contains the actual pattern ID.
This results in attempting to destroy a pattern using uninitialized
data from the output parameter, rather than the valid pattern ID
returned by the firmware.
Use ptrn_id instead of *pattern_id in the cleanup path to properly
destroy the created pattern.
Fixes: aefc15a0fa1c ("net/mlx5: HWS, added modify header pattern and args handling")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mlx5hws_pat_calc_nop(), src_field and dst_field are passed to
hws_action_modify_get_target_fields() which should set their values.
However, if an invalid action type is encountered, these variables
remain uninitialized and are later used to update prev_src_field
and prev_dst_field.
Initialize both variables to INVALID_FIELD to ensure they have
defined values in all code paths.
Fixes: 01e035fd0380 ("net/mlx5: HWS, handle modify header actions dependency")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an invalid stc_type is provided, the function allocates memory for
shared_stc but jumps to unlock_and_out without freeing it, causing a
memory leak.
Fix by jumping to free_shared_stc label instead to ensure proper cleanup.
Fixes: 504e536d9010 ("net/mlx5: HWS, added actions handling")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the error path of hws_pool_buddy_init(), the buddy allocator cleanup
doesn't free the allocator structure itself, causing a memory leak.
Add the missing kfree() to properly release all allocated memory.
Fixes: c61afff94373 ("net/mlx5: HWS, added memory management handling")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-08-25 (ice, ixgbe)
For ice:
Emil adds a check to ensure auxiliary device was created before tear
down to prevent NULL a pointer dereference.
Jake reworks flow for failed Tx scheduler configuration to allow for
proper recovery and operation. He also adjusts ice_adapter index for
E825C devices as use of DSN is incompatible with this device.
Michal corrects tracking of buffer allocation failure in
ice_clean_rx_irq().
For ixgbe:
Jedrzej adds __packed attribute to ixgbe_orom_civd_info to compatibility
with device OROM data.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: fix ixgbe_orom_civd_info struct layout
ice: fix incorrect counter for buffer allocation failures
ice: use fixed adapter index for E825C embedded devices
ice: don't leave device non-functional if Tx scheduler config fails
ice: fix NULL pointer dereference in ice_unplug_aux_dev() on reset
====================
Link: https://patch.msgid.link/20250825215019.3442873-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The HW resource reservation logic allows the L2 driver to use the
RoCE resources if the RoCE driver is not registered. When calculating
the stats contexts available for L2, we should not blindly subtract
the stats contexts reserved for RoCE unless the RoCE driver is
registered. This bug may cause the L2 rings to be less than the
number requested when we are close to running out of stats contexts.
Fixes: 2e4592dc9bee ("bnxt_en: Change MSIX/NQs allocation policy")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250825175927.459987-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before we accept an ethtool request to increase a resource (such as
rings), we call the FW to check that the requested resource is likely
available first before we commit. But it is still possible that
the actual reservation or allocation can fail. The existing code
is missing the logic to adjust the TX rings in case the reserved
TX rings are less than requested. Add a warning message (a similar
message for RX rings already exists) and add the logic to adjust
the TX rings. Without this fix, the number of TX rings reported
to the stack can exceed the actual TX rings and ethtool -l will
report more than the actual TX rings.
Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250825175927.459987-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_set_dflt_rings() assumes that it is always called before any TC has
been created. So it doesn't take bp->num_tc into account and assumes
that it is always 0 or 1.
In the FW resource or capability change scenario, the FW will return
flags in bnxt_hwrm_if_change() that will cause the driver to
reinitialize and call bnxt_cancel_reservations(). This will lead to
bnxt_init_dflt_ring_mode() calling bnxt_set_dflt_rings() and bp->num_tc
may be greater than 1. This will cause bp->tx_ring[] to be sized too
small and cause memory corruption in bnxt_alloc_cp_rings().
Fix it by properly scaling the TX rings by bp->num_tc in the code
paths mentioned above. Add 2 helper functions to determine
bp->tx_nr_rings and bp->tx_nr_rings_per_tc.
Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250825175927.459987-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
hw_stats now has only one variable for tx_octets/rx_octets, so we should
only increment p once, not twice. This would cause the statistics to be
reported under the wrong categories in `ethtool -S --all-groups` (which
uses hw_stats) but not `ethtool -S` (which uses ethtool_stats).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Fixes: f6af690a295a ("net: cadence: macb: Report standard stats")
Link: https://patch.msgid.link/20250825172134.681861-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It looks like that every time when the interface was set down and up the
driver was creating a new ptp clock. On top of this the function
ptp_clock_unregister was never called.
Therefore fix this by calling ptp_clock_register and initialize the
mii_ts struct inside the probe function and call ptp_clock_unregister when
driver is removed.
Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250825065543.2916334-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the following Telit Cinterion LE910C4-WWX new compositions:
0x1034: tty (AT) + tty (AT) + rmnet
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1034 Rev=00.00
S: Manufacturer=Telit
S: Product=LE910C4-WWX
S: SerialNumber=93f617e7
C: #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x1037: tty (diag) + tty (Telit custom) + tty (AT) + tty (AT) + rmnet
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 15 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1037 Rev=00.00
S: Manufacturer=Telit
S: Product=LE910C4-WWX
S: SerialNumber=93f617e7
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x1038: tty (Telit custom) + tty (AT) + tty (AT) + rmnet
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1038 Rev=00.00
S: Manufacturer=Telit
S: Product=LE910C4-WWX
S: SerialNumber=93f617e7
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Link: https://patch.msgid.link/20250822091324.39558-1-Fabio.Porcedda@telit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit b0a2ee5567ab ("drm/xe: prepare xe_gen_wa_oob to be multi-use")
introduced a call to basename(). The GNU version of this function is not
portable and fails to build with alternative libc implementations like
musl or bionic. This causes the following build error:
drivers/gpu/drm/xe/xe_gen_wa_oob.c:130:12: error: assignment to ‘const char *’ from ‘int’ makes pointer from integer without a cast [-Wint-conversion]
130 | fn = basename(fn);
| ^
While a POSIX version of basename() could be used, it would require a
separate header plus the behavior differs from GNU version in that it
might modify its argument. Not great.
Instead, implement a local xbasename() helper based on strrchr() that
provides the same functionality and avoids portability issues.
Fixes: b0a2ee5567ab ("drm/xe: prepare xe_gen_wa_oob to be multi-use")
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tiffany Yang <ynaffit@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250825155743.1132433-1-cmllamas@google.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 41be792f5baaf90d744a9a9e82994ce560ca9582)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
