summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-08-05dmaengine: dw: Add memory bus width verificationSerge Semin
Currently in case of the DEV_TO_MEM or MEM_TO_DEV DMA transfers the memory data width (single transfer width) is determined based on the buffer length, buffer base address or DMA master-channel max address width capability. It isn't enough in case of the channel disabling prior the block transfer is finished. Here is what DW AHB DMA IP-core databook says regarding the port suspension (DMA-transfer pause) implementation in the controller: "When CTLx.SRC_TR_WIDTH < CTLx.DST_TR_WIDTH and the CFGx.CH_SUSP bit is high, the CFGx.FIFO_EMPTY is asserted once the contents of the FIFO do not permit a single word of CTLx.DST_TR_WIDTH to be formed. However, there may still be data in the channel FIFO, but not enough to form a single transfer of CTLx.DST_TR_WIDTH. In this scenario, once the channel is disabled, the remaining data in the channel FIFO is not transferred to the destination peripheral." So in case if the port gets to be suspended and then disabled it's possible to have the data silently discarded even though the controller reported that FIFO is empty and the CTLx.BLOCK_TS indicated the dropped data already received from the source device. This looks as if the data somehow got lost on a way from the peripheral device to memory and causes problems for instance in the DW APB UART driver, which pauses and disables the DMA-transfer as soon as the recv data timeout happens. Here is the way it looks: Memory <------- DMA FIFO <------ UART FIFO <---------------- UART DST_TR_WIDTH -+--------| | | | | | | No more data Current lvl -+--------| |---------+- DMA-burst lvl | | |---------+- Leftover data | | |---------+- SRC_TR_WIDTH -+--------+-------+---------+ In the example above: no more data is getting received over the UART port and BLOCK_TS is not even close to be fully received; some data is left in the UART FIFO, but not enough to perform a bursted DMA-xfer to the DMA FIFO; some data is left in the DMA FIFO, but not enough to be passed further to the system memory in a single transfer. In this situation the 8250 UART driver catches the recv timeout interrupt, pauses the DMA-transfer and terminates it completely, after which the IRQ handler manually fetches the leftover data from the UART FIFO into the recv-buffer. But since the DMA-channel has been disabled with the data left in the DMA FIFO, that data will be just discarded and the recv-buffer will have a gap of the "current lvl" size in the recv-buffer at the tail of the lately received data portion. So the data will be lost just due to the misconfigured DMA transfer. Note this is only relevant for the case of the transfer suspension and _disabling_. No problem will happen if the transfer will be re-enabled afterwards or the block transfer is fully completed. In the later case the "FIFO flush mode" will be executed at the transfer final stage in order to push out the data left in the DMA FIFO. In order to fix the denoted problem the DW AHB DMA-engine driver needs to make sure that the _bursted_ source transfer width is greater or equal to the single destination transfer (note the HW databook describes more strict constraint than actually required). Since the peripheral-device side is prescribed by the client driver logic, the memory-side can be only used for that. The solution can be easily implemented for the DEV_TO_MEM transfers just by adjusting the memory-channel address width. Sadly it's not that easy for the MEM_TO_DEV transfers since the mem-to-dma burst size is normally dynamically determined by the controller. So the only thing that can be done is to make sure that memory-side address width is greater than the peripheral device address width. Fixes: a09820043c9e ("dw_dmac: autoconfigure data_width or get it via platform data") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20240802075100.6475-3-fancer.lancer@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-05dmaengine: dw: Add peripheral bus width verificationSerge Semin
Currently the src_addr_width and dst_addr_width fields of the dma_slave_config structure are mapped to the CTLx.SRC_TR_WIDTH and CTLx.DST_TR_WIDTH fields of the peripheral bus side in order to have the properly aligned data passed to the target device. It's done just by converting the passed peripheral bus width to the encoded value using the __ffs() function. This implementation has several problematic sides: 1. __ffs() is undefined if no bit exist in the passed value. Thus if the specified addr-width is DMA_SLAVE_BUSWIDTH_UNDEFINED, __ffs() may return unexpected value depending on the platform-specific implementation. 2. DW AHB DMA-engine permits having the power-of-2 transfer width limited by the DMAH_Mk_HDATA_WIDTH IP-core synthesize parameter. Specifying bus-width out of that constraints scope will definitely cause unexpected result since the destination reg will be only partly touched than the client driver implied. Let's fix all of that by adding the peripheral bus width verification method and calling it in dwc_config() which is supposed to be executed before preparing any transfer. The new method will make sure that the passed source or destination address width is valid and if undefined then the driver will just fallback to the 1-byte width transfer. Fixes: 029a40e97d0d ("dmaengine: dw: provide DMA capabilities") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20240802075100.6475-2-fancer.lancer@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-05i2c: qcom-geni: Add missing clk_disable_unprepare in geni_i2c_runtime_resumeGaosheng Cui
Add the missing clk_disable_unprepare() before return in geni_i2c_runtime_resume(). Fixes: 14d02fbadb5d ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-08-05phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resumePiyush Mehta
On a few Kria KR260 Robotics Starter Kit the PS-GEM SGMII linkup is not happening after the resume. This is because serdes registers are reset when FPD is off (in suspend state) and needs to be reprogrammed in the resume path with the same default initialization as done in the first stage bootloader psu_init routine. To address the failure introduce a set of serdes registers to be saved in the suspend path and then restore it on resume. Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver") Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1722837547-2578381-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-05drm/bridge-connector: Fix double free in error handling pathsCristian Ciocaltea
The recent switch to drmm allocation in drm_bridge_connector_init() may cause double free on bridge_connector in some of the error handling paths. Drop the explicit kfree() calls on bridge_connector. Fixes: c12907be57b1 ("drm/bridge-connector: switch to using drmm allocations") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Signed-off-by: default avatarRobert Foss <rfoss@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240711-bridge-connector-fix-dbl-free-v1-1-d558b2d0eb93@collabora.com
2024-08-05drm/mediatek: Set sensible cursor width/height values to fix crashAngeloGioacchino Del Regno
Hardware-speaking, there is no feature-reduced cursor specific plane, so this driver reserves the last all Overlay plane as a Cursor plane, but sets the maximum cursor width/height to the maximum value that the full overlay plane can use. While this could be ok, it raises issues with common userspace using libdrm (especially Mutter, but other compositors too) which will crash upon performing allocations and/or using said cursor plane. Reduce the maximum width/height for the cursor to 512x512 pixels, value taken from IGT's maximum cursor size test, which succeeds. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Fei Shao <fshao@chromium.org> Tested-by: Fei Shao <fshao@chromium.org> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20240718082410.204459-1-angelogioacchino.delregno@collabora.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2024-08-05drm/omap: add CONFIG_MMU dependencyArnd Bergmann
Compile-testing with CONFIG_MMU disabled causes a link error in omapdrm: arm-linux-gnueabi-ld: drivers/gpu/drm/omapdrm/omap_gem.o: in function `omap_gem_fault_2d': omap_gem.c:(.text+0x36e): undefined reference to `vmf_insert_mixed' arm-linux-gnueabi-ld: drivers/gpu/drm/omapdrm/omap_gem.o: in function `omap_gem_fault': omap_gem.c:(.text+0x74a): undefined reference to `vmf_insert_mixed' Avoid this by adding a Kconfig dependency. Fixes: dc6fcaaba5a5 ("drm/omap: Allow build with COMPILE_TEST=y") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240719095942.3841009-1-arnd@kernel.org
2024-08-05pmdomain: imx: scu-pd: Remove duplicated clocksAlexander Stein
These clocks are already added to the list. Remove the duplicates ones. Fixes: a67d780720ff ("genpd: imx: scu-pd: add more PDs") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240717080334.2210988-1-alexander.stein@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-08-05net: usb: qmi_wwan: fix memory leak for not ip packetsDaniele Palmas
Free the unused skb when not ip packets arrive. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-05virtio-net: unbreak vq resizing when coalescing is not negotiatedHeng Qi
Don't break the resize action if the vq coalescing feature named VIRTIO_NET_F_VQ_NOTF_COAL is not negotiated. Fixes: f61fe5f081cf ("virtio-net: fix the vq coalescing setting for vq resize") Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Eugenio Pé rez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-05virtio-net: check feature before configuring the vq coalescing commandHeng Qi
Virtio spec says: The driver MUST have negotiated the VIRTIO_NET_F_VQ_NOTF_COAL feature when issuing commands VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET and VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET. So we add the feature negotiation check to virtnet_send_{r,t}x_ctrl_coal_vq_cmd as a basis for the next bugfix patch. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-05drm/i915/display: correct dual pps handling for MTL_PCH+Dnyaneshwar Bhadane
On the PCH side the second PPS was introduced in ICP+.Add condition On MTL_PCH and greater platform also having the second PPS. Note that DG1/2 south block only has the single PPS, so need to exclude the fake DG1/2 PCHs Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11488 Fixes: 93cbc1accbce ("drm/i915/mtl: Add fake PCH for Meteor Lake") Cc: <stable@vger.kernel.org> # v6.9+ Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240801111141.574854-1-dnyaneshwar.bhadane@intel.com (cherry picked from commit da1878b61c8d480c361ba6a39ce8a31c80b65826) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-08-05wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850Baochen Qiang
In transmit path, it is likely that the iova is not aligned to PCIe TLP max payload size, which is 128 for WCN7850. Normally in such cases hardware is expected to split the packet into several parts in a manner such that they, other than the first one, have aligned iova. However due to hardware limitations, WCN7850 does not behave like that properly with some specific unaligned iova in transmit path. This easily results in target hang in a KPI transmit test: packet send/receive failure, WMI command send timeout etc. Also fatal error seen in PCIe level: ... Capabilities: ... ... DevSta: ... FatalErr+ ... ... ... Work around this by manually moving/reallocating payload buffer such that we can map it to a 128 bytes aligned iova. The moving requires sufficient head room or tail room in skb: for the former we can do ourselves a favor by asking some extra bytes when registering with mac80211, while for the latter we can do nothing. Moving/reallocating buffer consumes additional CPU cycles, but the good news is that an aligned iova increases PCIe efficiency. In my tests on some X86 platforms the KPI results are almost consistent. Since this is seen only with WCN7850, add a new hardware parameter to differentiate from others. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Cc: <stable@vger.kernel.org> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240715023814.20242-1-quic_bqiang@quicinc.com
2024-08-05pinctrl: qcom: x1e80100: Update PDC hwirq mapKonrad Dybcio
The current map seems to be out of sync (and includes a duplicate entry for GPIO193..). Replace it with the map present in shipping devices' ACPI tables. This new one seems more complete, as it e.g. contains GPIO145 (PCIE6a WAKE#) Fixes: 05e4941d97ef ("pinctrl: qcom: Add X1E80100 pinctrl driver") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Rajendra Nayak <quic_rjendra@quicinc.com> Link: https://lore.kernel.org/20240711-topic-x1e_pdc_tlmm-v1-1-e278b249d793@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-08-04Input: uinput - reject requests with unreasonable number of slotsDmitry Torokhov
From: Dmitry Torokhov <dmitry.torokhov@gmail.com> When exercising uinput interface syzkaller may try setting up device with a really large number of slots, which causes memory allocation failure in input_mt_init_slots(). While this allocation failure is handled properly and request is rejected, it results in syzkaller reports. Additionally, such request may put undue burden on the system which will try to free a lot of memory for a bogus request. Fix it by limiting allowed number of slots to 100. This can easily be extended if we see devices that can track more than 100 contacts. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5 Link: https://lore.kernel.org/r/Zqgi7NYEbpRsJfa2@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-08-04Input: edt-ft5x06 - add support for FocalTech FT8201Felix Kaechele
The driver supports the FT8201 chip as well. It registers up to 10 touch points. Tested on: Lenovo ThinkSmart View (CD-18781Y), LCM: BOE TV080WXM-LL4 Signed-off-by: Felix Kaechele <felix@kaechele.ca> Link: https://lore.kernel.org/r/20240804031310.331871-3-felix@kaechele.ca Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-08-04phy: exynos5-usbdrd: fix error code in probe()Dan Carpenter
Return negative -ENOMEM instead of positive ENOMEM. Fixes: 497ddafe915e ("phy: exynos5-usbdrd: convert Vbus supplies to regulator_bulk") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/a956a3e2-c6ce-4f07-ad80-ec8a96e00d16@stanley.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-04phy: fsl-imx8mq-usb: fix tuning parameter nameXu Yang
According to fsl,imx8mq-usb-phy.yaml, this tuning parameter should be fsl,phy-pcs-tx-deemph-3p5db-attenuation-db. Fixes: 63c85ad0cd81 ("phy: fsl-imx8mp-usb: add support for phy tuning") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20240801124642.1152838-1-xu.yang_2@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-04phy: qcom: qmp-pcie: Fix X1E80100 PCIe Gen4 PHY initialisationAbel Vesa
Update the PCIe Gen4 PHY init sequence with the latest based on internal Qualcomm documentation. Fixes: 606060ce8fd0 ("phy: qcom-qmp-pcie: Add support for X1E80100 g3x2 and g4x2 PCIE") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240801-x1e80100-phy-qmp-pcie-fix-config-v2-1-cdc0f22b4169@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-04Merge tag 'irq-urgent-2024-08-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A couple of fixes for interrupt chip drivers: - Make sure to skip the clear register space in the MBIGEN driver when calculating the node register index. Otherwise the clear register is clobbered and the wrong node registers are accessed. - Fix a signed/unsigned confusion in the loongarch CPU driver which converts an error code to a huge "valid" interrupt number. - Convert the mesion GPIO interrupt controller lock to a raw spinlock so it works on RT. - Add a missing static to a internal function in the pic32 EVIC driver" * tag 'irq-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mbigen: Fix mbigen node address layout irqchip/meson-gpio: Convert meson_gpio_irq_controller::lock to 'raw_spinlock_t' irqchip/irq-pic32-evic: Add missing 'static' to internal function irqchip/loongarch-cpu: Fix return value of lpic_gsi_to_irq()
2024-08-04Merge tag 'media/v6.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - two Kconfig fixes - one fix for the UVC driver addressing probing time detection of a UVC custom controls - one fix related to PDF generation * tag 'media/v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: v4l: Fix missing tabular column hint for Y14P format media: intel/ipu6: select AUXILIARY_BUS in Kconfig media: ipu-bridge: fix ipu6 Kconfig dependencies media: uvcvideo: Fix custom control mapping probing
2024-08-04i2c: smbus: Send alert notifications to all devices if source not foundGuenter Roeck
If a SMBus alert is received and the originating device is not found, the reason may be that the address reported on the SMBus alert address is corrupted, for example because multiple devices asserted alert and do not correctly implement SMBus arbitration. If this happens, call alert handlers on all devices connected to the given I2C bus, in the hope that this cleans up the situation. This change reliably fixed the problem on a system with multiple devices on a single bus. Example log where the device on address 0x18 (ADM1021) and on address 0x4c (ADT7461A) both had the alert line asserted: smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0 smbus_alert 3-000c: no driver alert()! smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0 smbus_alert 3-000c: no driver alert()! lm90 3-0018: temp1 out of range, please check! lm90 3-0018: Disabling ALERT# lm90 3-0029: Everything OK lm90 3-002a: Everything OK lm90 3-004c: temp1 out of range, please check! lm90 3-004c: temp2 out of range, please check! lm90 3-004c: Disabling ALERT# Fixes: b5527a7766f0 ("i2c: Add SMBus alert support") Signed-off-by: Guenter Roeck <linux@roeck-us.net> [wsa: fixed a typo in the commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2024-08-03Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "One core change that reverts the double message print patch in sd.c (it was causing regressions on embedded systems). The rest are driver fixes in ufs, mpt3sas and mpi3mr" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: exynos: Don't resume FMP when crypto support is disabled scsi: mpt3sas: Avoid IOMMU page faults on REPORT ZONES scsi: mpi3mr: Avoid IOMMU page faults on REPORT ZONES scsi: ufs: core: Do not set link to OFF state while waking up from hibernation scsi: Revert "scsi: sd: Do not repeat the starting disk message" scsi: ufs: core: Fix deadlock during RTC update scsi: ufs: core: Bypass quick recovery if force reset is needed scsi: ufs: core: Check LSDBS cap when !mcq
2024-08-03iio: adc: ads1119: Fix IRQ flagsFrancesco Dolcini
Remove IRQF_TRIGGER_FALLING flag from irq request, this should come from the platform firmware and should not be hard-coded into the driver. Add IRQF_ONESHOT flag to the irq request, the interrupt should not be re-activated in interrupt context, it should be done only after the device irq handler run. Fixes: a9306887eba4 ("iio: adc: ti-ads1119: Add driver") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviwed-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com> Link: https://patch.msgid.link/20240731140657.88265-1-francesco@dolcini.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-08-03iio: fix scale application in iio_convert_raw_to_processed_unlockedMatteo Martelli
When the scale_type is IIO_VAL_INT_PLUS_MICRO or IIO_VAL_INT_PLUS_NANO the scale passed as argument is only applied to the fractional part of the value. Fix it by also multiplying the integer part by the scale provided. Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value") Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com> Link: https://patch.msgid.link/20240730-iio-fix-scale-v1-1-6246638c8daa@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-08-03iio: adc: ad7124: fix config comparisonDumitru Ceclan
The ad7124_find_similar_live_cfg() computes the compare size by substracting the address of the cfg struct from the address of the live field. Because the live field is the first field in the struct, the result is 0. Also, the memcmp() call is made from the start of the cfg struct, which includes the live and cfg_slot fields, which are not relevant for the comparison. Fix by grouping the relevant fields with struct_group() and use the size of the group to compute the compare size; make the memcmp() call from the address of the group. Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels") Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240731-ad7124-fix-v1-2-46a76aa4b9be@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-08-03iio: adc: ad7124: fix chip ID mismatchDumitru Ceclan
The ad7124_soft_reset() function has the assumption that the chip will assert the "power-on reset" bit in the STATUS register after a software reset without any delay. The POR bit =0 is used to check if the chip initialization is done. A chip ID mismatch probe error appears intermittently when the probe continues too soon and the ID register does not contain the expected value. Fix by adding a 200us delay after the software reset command is issued. Fixes: b3af341bbd96 ("iio: adc: Add ad7124 support") Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240731-ad7124-fix-v1-1-46a76aa4b9be@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-08-03Merge tag 'tags/fixes-media-uvc-20230722' of ↵Hans Verkuil
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git uvcvideo v6.11 regression fix: fix custom control mapping probing Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-02scsi: sd: Keep the discard mode stableLi Feng
There is a scenario where a large number of discard commands are issued when the iscsi initiator connects to the target and then performs a session rescan operation. There is a time window, most of the commands are in UNMAP mode, and some discard commands become WRITE SAME with UNMAP. The discard mode has been negotiated during the SCSI probe. If the mode is temporarily changed from UNMAP to WRITE SAME with UNMAP, an I/O ERROR may occur because the target may not implement WRITE SAME with UNMAP. Keep the discard mode stable to fix this issue. Signed-off-by: Li Feng <fengli@smartx.com> Link: https://lore.kernel.org/r/20240718080751.313102-2-fengli@smartx.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-08-03Drivers: hv: vmbus: Fix the misplaced function descriptionRoman Kisel
When hv_synic_disable_regs was introduced, it received the description of hv_synic_cleanup. Fix that. Fixes: dba61cda3046 ("Drivers: hv: vmbus: Break out synic enable and disable operations") Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Michael Kelley <mhkelley@outlook.com> Link: https://lore.kernel.org/r/20240801212235.352220-1-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240801212235.352220-1-romank@linux.microsoft.com>
2024-08-02gve: Fix use of netif_carrier_ok()Praveen Kaligineedi
GVE driver wrongly relies on netif_carrier_ok() to check the interface administrative state when resources are being allocated/deallocated for queue(s). netif_carrier_ok() needs to be replaced with netif_running() for all such cases. Administrative state is the result of "ip link set dev <dev> up/down". It reflects whether the administrator wants to use the device for traffic and the corresponding resources have been allocated. Fixes: 5f08cd3d6423 ("gve: Alloc before freeing when adjusting queues") Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Shailend Chand <shailend@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240801205619.987396-1-pkaligineedi@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-02net: pse-pd: tps23881: Fix the device ID checkKyle Swenson
The DEVID register contains two pieces of information: the device ID in the upper nibble, and the silicon revision number in the lower nibble. The driver should work fine with any silicon revision, so let's mask that out in the device ID check. Fixes: 20e6d190ffe1 ("net: pse-pd: Add TI TPS23881 PSE controller driver") Signed-off-by: Kyle Swenson <kyle.swenson@est.tech> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20240731154152.4020668-1-kyle.swenson@est.tech Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-02Merge tag 'thermal-6.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix a few issues related to the MSI IRQs management in the int340x thermal driver, fix a thermal core issue that may lead to missing trip point crossing events and update the thermal core documentation. Specifics: - Fix MSI error path cleanup in int340x, allow it to work with a subset of thermal MSI IRQs if some of them are not working and make it free all MSI IRQs on module exit (Srinivas Pandruvada) - Fix a thermal core issue that may lead to missing trip point crossing events in some cases when thermal_zone_set_trips() is used and update the thermal core documentation (Rafael Wysocki)" * tag 'thermal-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: core: Update thermal zone registration documentation thermal: trip: Avoid skipping trips in thermal_zone_set_trips() thermal: intel: int340x: Free MSI IRQ vectors on module exit thermal: intel: int340x: Allow limited thermal MSI support thermal: intel: int340x: Fix kernel warning during MSI cleanup
2024-08-02Merge tag 'riscv-for-linus-6.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A fix to avoid dropping some of the internal pseudo-extensions, which breaks *envcfg dependency parsing - The kernel entry address is now aligned in purgatory, which avoids a misaligned load that can lead to crash on systems that don't support misaligned accesses early in boot - The FW_SFENCE_VMA_RECEIVED perf event was duplicated in a handful of perf JSON configurations, one of them been updated to FW_SFENCE_VMA_ASID_SENT - The starfive cache driver is now restricted to 64-bit systems, as it isn't 32-bit clean - A fix for to avoid aliasing legacy-mode perf counters with software perf counters - VM_FAULT_SIGSEGV is now handled in the page fault code - A fix for stalls during CPU hotplug due to IPIs being disabled - A fix for memblock bounds checking. This manifests as a crash on systems with discontinuous memory maps that have regions that don't fit in the linear map * tag 'riscv-for-linus-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix linear mapping checks for non-contiguous memory regions RISC-V: Enable the IPI before workqueue_online_cpu() riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error() perf: riscv: Fix selecting counters in legacy mode cache: StarFive: Require a 64-bit system perf arch events: Fix duplicate RISC-V SBI firmware event name riscv/purgatory: align riscv_kernel_entry riscv: cpufeature: Do not drop Linux-internal extensions
2024-08-02Merge tag 's390-6.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - remove unused empty CPU alternatives header file - fix recently and erroneously removed exception handling when loading an invalid floating point register - ptdump fixes to reflect the recent changes due to the uncoupling of physical vs virtual kernel address spaces - changes to avoid the unnecessary splitting of large pages in kernel mappings - add the missing MODULE_DESCRIPTION for the CIO modules * tag 's390-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: Keep inittext section writable s390/vmlinux.lds.S: Move ro_after_init section behind rodata section s390/mm: Get rid of RELOC_HIDE() s390/mm/ptdump: Improve sorting of markers s390/mm/ptdump: Add support for relocated lowcore mapping s390/mm/ptdump: Fix handling of identity mapping area s390/cio: Add missing MODULE_DESCRIPTION() macros s390/alternatives: Remove unused empty header file s390/fpu: Re-add exception handling in load_fpu_state()
2024-08-02Merge tag 'drm-fixes-2024-08-02' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular weekly fixes. This is a bit larger than usual but doesn't seem too crazy. Most of it is vmwgfx changes that fix a bunch of issues with wayland userspaces with dma-buf/external buffers and modesetting fixes. Otherwise it's kinda spread out, v3d fixes some new ioctls, nouveau has regression revert and fixes, amdgpu, i915 and ast have some small fixes, and some core fixes spread about. client: - fix error code atomic: - allow damage clips with async flips - allow explicit sync with async flips kselftests: - fix dmabuf-heaps test panic: - fix schedule_work in panic paths panel: - fix OrangePi Neo orientation gpuvm: - fix missing dependency amdgpu: - SMU 14.x update - Fix contiguous VRAM handling for IB parsing - GFX 12 fix - Regression fix for old APUs i915: - Static analysis fix for int overflow - Fix for HDCP2_STREAM_STATUS macro and removal of PWR_CLK_STATE for gen12 nouveau: - revert busy wait change that caused a resume regression - fix buffer placement fault on dynamic pm s/r - fix refcount underflow ast: - fix black screen on resume - wake during connector status detect v3d: - fix issues with perf/timestamp ioctls vmwgfx: - fix deadlock in dma-buf fence polling - fix screen surface refcounting - fix dumb buffer handling - fix support for external buffers - fix overlay with screen targets - trigger modeset on screen moves" * tag 'drm-fixes-2024-08-02' of https://gitlab.freedesktop.org/drm/kernel: (31 commits) Revert "nouveau: rip out busy fence waits" nouveau: set placement to original placement on uvmm validate. drm/atomic: Allow userspace to use damage clips with async flips drm/atomic: Allow userspace to use explicit sync with atomic async flips drm/i915: Fix possible int overflow in skl_ddi_calculate_wrpll() drm/i915/hdcp: Fix HDCP2_STREAM_STATUS macro drm/ast: astdp: Wake up during connector status detection i915/perf: Remove code to update PWR_CLK_STATE for gen12 kselftests: dmabuf-heaps: Ensure the driver name is null-terminated drm/client: Fix error code in drm_client_buffer_vmap_local() drm/amdgpu: Fix APU handling in amdgpu_pm_load_smu_firmware() drm/amdgpu: increase mes log buffer size for gfx12 drm/amdgpu: fix contiguous handling for IB parsing v2 drm/amdgpu/pm: support gpu_metrics sysfs interface for smu v14.0.2/3 drm/vmwgfx: Trigger a modeset when the screen moves drm/vmwgfx: Fix overlay when using Screen Targets drm/vmwgfx: Add basic support for external buffers drm/vmwgfx: Fix handling of dumb buffers drm/vmwgfx: Make sure the screen surface is ref counted drm/vmwgfx: Fix a deadlock in dma buf fence polling ...
2024-08-02iommu: Restore lost return in iommu_report_device_fault()Barak Biber
When iommu_report_device_fault gets called with a partial fault it is supposed to collect the fault into the group and then return. Instead the return was accidently deleted which results in trying to process the fault and an eventual crash. Deleting the return was a typo, put it back. Fixes: 3dfa64aecbaf ("iommu: Make iommu_report_device_fault() return void") Signed-off-by: Barak Biber <bbiber@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/0-v1-e7153d9c8cee+1c6-iommu_fault_fix_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-08-02cpufreq: intel_pstate: Update Balance performance EPP for Emerald RapidsPedro Henrique Kopper
On Intel Emerald Rapids machines, we ship the Energy Performance Preference (EPP) default for balance_performance as 128. However, during an internal investigation together with Intel, we have determined that 32 is a more suitable value. This leads to significant improvements in both performance and energy: POV-Ray: 32% faster | 12% less energy OpenSSL: 12% faster | energy within 1% Build Linux Kernel: 29% faster | 18% less energy Therefore, we should move the default EPP for balance_performance to 32. This is in line with what has already been done for Sapphire Rapids. Signed-off-by: Pedro Henrique Kopper <pedro.kopper@canonical.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/Zqu6zjVMoiXwROBI@capivara Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-08-02HID: wacom: Defer calculation of resolution until resolution_code is knownJason Gerecke
The Wacom driver maps the HID_DG_TWIST usage to ABS_Z (rather than ABS_RZ) for historic reasons. When the code to support twist was introduced in commit 50066a042da5 ("HID: wacom: generic: Add support for height, tilt, and twist usages"), we were careful to write it in such a way that it had HID calculate the resolution of the twist axis assuming ABS_RZ instead (so that we would get correct angular behavior). This was broken with the introduction of commit 08a46b4190d3 ("HID: wacom: Set a default resolution for older tablets"), which moved the resolution calculation to occur *before* the adjustment from ABS_Z to ABS_RZ occurred. This commit moves the calculation of resolution after the point that we are finished setting things up for its proper use. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Fixes: 08a46b4190d3 ("HID: wacom: Set a default resolution for older tablets") Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-08-02HID: multitouch: Add support for GT7868QDmitry Savin
GT7868Q has incorrect data in the report and needs a fixup. The change enables haptic touchpad on Lenovo ThinkBook 13x Gen 4 and has been tested on the device. Signed-off-by: Dmitry Savin <envelsavinds@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-08-02HID: amd_sfh: free driver_data after destroying hid deviceOlivier Sobrie
HID driver callbacks aren't called anymore once hid_destroy_device() has been called. Hence, hid driver_data should be freed only after the hid_destroy_device() function returned as driver_data is used in several callbacks. I observed a crash with kernel 6.10.0 on my T14s Gen 3, after enabling KASAN to debug memory allocation, I got this output: [ 13.050438] ================================================================== [ 13.054060] BUG: KASAN: slab-use-after-free in amd_sfh_get_report+0x3ec/0x530 [amd_sfh] [ 13.054809] psmouse serio1: trackpoint: Synaptics TrackPoint firmware: 0x02, buttons: 3/3 [ 13.056432] Read of size 8 at addr ffff88813152f408 by task (udev-worker)/479 [ 13.060970] CPU: 5 PID: 479 Comm: (udev-worker) Not tainted 6.10.0-arch1-2 #1 893bb55d7f0073f25c46adbb49eb3785fefd74b0 [ 13.063978] Hardware name: LENOVO 21CQCTO1WW/21CQCTO1WW, BIOS R22ET70W (1.40 ) 03/21/2024 [ 13.067860] Call Trace: [ 13.069383] input: TPPS/2 Synaptics TrackPoint as /devices/platform/i8042/serio1/input/input8 [ 13.071486] <TASK> [ 13.071492] dump_stack_lvl+0x5d/0x80 [ 13.074870] snd_hda_intel 0000:33:00.6: enabling device (0000 -> 0002) [ 13.078296] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.082199] print_report+0x174/0x505 [ 13.085776] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 13.089367] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.093255] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.097464] kasan_report+0xc8/0x150 [ 13.101461] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.105802] amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.110303] amdtp_hid_request+0xb8/0x110 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.114879] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.119450] sensor_hub_get_feature+0x1d3/0x540 [hid_sensor_hub 3f13be3016ff415bea03008d45d99da837ee3082] [ 13.124097] hid_sensor_parse_common_attributes+0x4d0/0xad0 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5] [ 13.127404] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.131925] ? __pfx_hid_sensor_parse_common_attributes+0x10/0x10 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5] [ 13.136455] ? _raw_spin_lock_irqsave+0x96/0xf0 [ 13.140197] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 13.143602] ? devm_iio_device_alloc+0x34/0x50 [industrialio 3d261d5e5765625d2b052be40e526d62b1d2123b] [ 13.147234] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.150446] ? __devm_add_action+0x167/0x1d0 [ 13.155061] hid_gyro_3d_probe+0x120/0x7f0 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172] [ 13.158581] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.161814] platform_probe+0xa2/0x150 [ 13.165029] really_probe+0x1e3/0x8a0 [ 13.168243] __driver_probe_device+0x18c/0x370 [ 13.171500] driver_probe_device+0x4a/0x120 [ 13.175000] __driver_attach+0x190/0x4a0 [ 13.178521] ? __pfx___driver_attach+0x10/0x10 [ 13.181771] bus_for_each_dev+0x106/0x180 [ 13.185033] ? __pfx__raw_spin_lock+0x10/0x10 [ 13.188229] ? __pfx_bus_for_each_dev+0x10/0x10 [ 13.191446] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.194382] bus_add_driver+0x29e/0x4d0 [ 13.197328] driver_register+0x1a5/0x360 [ 13.200283] ? __pfx_hid_gyro_3d_platform_driver_init+0x10/0x10 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172] [ 13.203362] do_one_initcall+0xa7/0x380 [ 13.206432] ? __pfx_do_one_initcall+0x10/0x10 [ 13.210175] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.213211] ? kasan_unpoison+0x44/0x70 [ 13.216688] do_init_module+0x238/0x750 [ 13.219696] load_module+0x5011/0x6af0 [ 13.223096] ? kasan_save_stack+0x30/0x50 [ 13.226743] ? kasan_save_track+0x14/0x30 [ 13.230080] ? kasan_save_free_info+0x3b/0x60 [ 13.233323] ? poison_slab_object+0x109/0x180 [ 13.236778] ? __pfx_load_module+0x10/0x10 [ 13.239703] ? poison_slab_object+0x109/0x180 [ 13.243070] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.245924] ? init_module_from_file+0x13d/0x150 [ 13.248745] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.251503] ? init_module_from_file+0xdf/0x150 [ 13.254198] init_module_from_file+0xdf/0x150 [ 13.256826] ? __pfx_init_module_from_file+0x10/0x10 [ 13.259428] ? kasan_save_track+0x14/0x30 [ 13.261959] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.264471] ? kasan_save_free_info+0x3b/0x60 [ 13.267026] ? poison_slab_object+0x109/0x180 [ 13.269494] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.271949] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.274324] ? _raw_spin_lock+0x85/0xe0 [ 13.276671] ? __pfx__raw_spin_lock+0x10/0x10 [ 13.278963] ? __rseq_handle_notify_resume+0x1a6/0xad0 [ 13.281193] idempotent_init_module+0x23b/0x650 [ 13.283420] ? __pfx_idempotent_init_module+0x10/0x10 [ 13.285619] ? __pfx___seccomp_filter+0x10/0x10 [ 13.287714] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.289828] ? __fget_light+0x57/0x420 [ 13.291870] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.293880] ? security_capable+0x74/0xb0 [ 13.295820] __x64_sys_finit_module+0xbe/0x130 [ 13.297874] do_syscall_64+0x82/0x190 [ 13.299898] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.301905] ? irqtime_account_irq+0x3d/0x1f0 [ 13.303877] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.305753] ? __irq_exit_rcu+0x4e/0x130 [ 13.307577] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.309489] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 13.311371] RIP: 0033:0x7a21f96ade9d [ 13.313234] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 63 de 0c 00 f7 d8 64 89 01 48 [ 13.317051] RSP: 002b:00007ffeae934e78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 13.319024] RAX: ffffffffffffffda RBX: 00005987276bfcf0 RCX: 00007a21f96ade9d [ 13.321100] RDX: 0000000000000004 RSI: 00007a21f8eda376 RDI: 000000000000001c [ 13.323314] RBP: 00007a21f8eda376 R08: 0000000000000001 R09: 00007ffeae934ec0 [ 13.325505] R10: 0000000000000050 R11: 0000000000000246 R12: 0000000000020000 [ 13.327637] R13: 00005987276c1250 R14: 0000000000000000 R15: 00005987276c4530 [ 13.329737] </TASK> [ 13.333945] Allocated by task 139: [ 13.336111] kasan_save_stack+0x30/0x50 [ 13.336121] kasan_save_track+0x14/0x30 [ 13.336125] __kasan_kmalloc+0xaa/0xb0 [ 13.336129] amdtp_hid_probe+0xb1/0x440 [amd_sfh] [ 13.336138] amd_sfh_hid_client_init+0xb8a/0x10f0 [amd_sfh] [ 13.336144] sfh_init_work+0x47/0x120 [amd_sfh] [ 13.336150] process_one_work+0x673/0xeb0 [ 13.336155] worker_thread+0x795/0x1250 [ 13.336160] kthread+0x290/0x350 [ 13.336164] ret_from_fork+0x34/0x70 [ 13.336169] ret_from_fork_asm+0x1a/0x30 [ 13.338175] Freed by task 139: [ 13.340064] kasan_save_stack+0x30/0x50 [ 13.340072] kasan_save_track+0x14/0x30 [ 13.340076] kasan_save_free_info+0x3b/0x60 [ 13.340081] poison_slab_object+0x109/0x180 [ 13.340085] __kasan_slab_free+0x32/0x50 [ 13.340089] kfree+0xe5/0x310 [ 13.340094] amdtp_hid_remove+0xb2/0x160 [amd_sfh] [ 13.340102] amd_sfh_hid_client_deinit+0x324/0x640 [amd_sfh] [ 13.340107] amd_sfh_hid_client_init+0x94a/0x10f0 [amd_sfh] [ 13.340113] sfh_init_work+0x47/0x120 [amd_sfh] [ 13.340118] process_one_work+0x673/0xeb0 [ 13.340123] worker_thread+0x795/0x1250 [ 13.340127] kthread+0x290/0x350 [ 13.340132] ret_from_fork+0x34/0x70 [ 13.340136] ret_from_fork_asm+0x1a/0x30 [ 13.342482] The buggy address belongs to the object at ffff88813152f400 which belongs to the cache kmalloc-64 of size 64 [ 13.347357] The buggy address is located 8 bytes inside of freed 64-byte region [ffff88813152f400, ffff88813152f440) [ 13.347367] The buggy address belongs to the physical page: [ 13.355409] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x13152f [ 13.355416] anon flags: 0x2ffff8000000000(node=0|zone=2|lastcpupid=0x1ffff) [ 13.355423] page_type: 0xffffefff(slab) [ 13.355429] raw: 02ffff8000000000 ffff8881000428c0 ffffea0004c43a00 0000000000000005 [ 13.355435] raw: 0000000000000000 0000000000200020 00000001ffffefff 0000000000000000 [ 13.355439] page dumped because: kasan: bad access detected [ 13.357295] Memory state around the buggy address: [ 13.357299] ffff88813152f300: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 13.357303] ffff88813152f380: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 13.357306] >ffff88813152f400: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 13.357309] ^ [ 13.357311] ffff88813152f480: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc [ 13.357315] ffff88813152f500: 00 00 00 00 00 00 00 06 fc fc fc fc fc fc fc fc [ 13.357318] ================================================================== [ 13.357405] Disabling lock debugging due to kernel taint [ 13.383534] Oops: general protection fault, probably for non-canonical address 0xe0a1bc4140000013: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 13.383544] KASAN: maybe wild-memory-access in range [0x050e020a00000098-0x050e020a0000009f] [ 13.383551] CPU: 3 PID: 479 Comm: (udev-worker) Tainted: G B 6.10.0-arch1-2 #1 893bb55d7f0073f25c46adbb49eb3785fefd74b0 [ 13.383561] Hardware name: LENOVO 21CQCTO1WW/21CQCTO1WW, BIOS R22ET70W (1.40 ) 03/21/2024 [ 13.383565] RIP: 0010:amd_sfh_get_report+0x81/0x530 [amd_sfh] [ 13.383580] Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 78 03 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 63 08 49 8d 7c 24 10 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 1a 03 00 00 45 8b 74 24 10 45 [ 13.383585] RSP: 0018:ffff8881261f7388 EFLAGS: 00010212 [ 13.383592] RAX: dffffc0000000000 RBX: ffff88813152f400 RCX: 0000000000000002 [ 13.383597] RDX: 00a1c04140000013 RSI: 0000000000000008 RDI: 050e020a0000009b [ 13.383600] RBP: ffff88814d010000 R08: 0000000000000002 R09: fffffbfff3ddb8c0 [ 13.383604] R10: ffffffff9eedc607 R11: ffff88810ce98000 R12: 050e020a0000008b [ 13.383607] R13: ffff88814d010000 R14: dffffc0000000000 R15: 0000000000000004 [ 13.383611] FS: 00007a21f94d0880(0000) GS:ffff8887e7d80000(0000) knlGS:0000000000000000 [ 13.383615] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 13.383618] CR2: 00007e0014c438f0 CR3: 000000012614c000 CR4: 0000000000f50ef0 [ 13.383622] PKRU: 55555554 [ 13.383625] Call Trace: [ 13.383629] <TASK> [ 13.383632] ? __die_body.cold+0x19/0x27 [ 13.383644] ? die_addr+0x46/0x70 [ 13.383652] ? exc_general_protection+0x150/0x240 [ 13.383664] ? asm_exc_general_protection+0x26/0x30 [ 13.383674] ? amd_sfh_get_report+0x81/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.383686] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.383697] amdtp_hid_request+0xb8/0x110 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.383706] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.383713] sensor_hub_get_feature+0x1d3/0x540 [hid_sensor_hub 3f13be3016ff415bea03008d45d99da837ee3082] [ 13.383727] hid_sensor_parse_common_attributes+0x4d0/0xad0 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5] [ 13.383739] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.383745] ? __pfx_hid_sensor_parse_common_attributes+0x10/0x10 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5] [ 13.383753] ? _raw_spin_lock_irqsave+0x96/0xf0 [ 13.383762] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 13.383768] ? devm_iio_device_alloc+0x34/0x50 [industrialio 3d261d5e5765625d2b052be40e526d62b1d2123b] [ 13.383790] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.383795] ? __devm_add_action+0x167/0x1d0 [ 13.383806] hid_gyro_3d_probe+0x120/0x7f0 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172] [ 13.383818] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.383826] platform_probe+0xa2/0x150 [ 13.383832] really_probe+0x1e3/0x8a0 [ 13.383838] __driver_probe_device+0x18c/0x370 [ 13.383844] driver_probe_device+0x4a/0x120 [ 13.383851] __driver_attach+0x190/0x4a0 [ 13.383857] ? __pfx___driver_attach+0x10/0x10 [ 13.383863] bus_for_each_dev+0x106/0x180 [ 13.383868] ? __pfx__raw_spin_lock+0x10/0x10 [ 13.383874] ? __pfx_bus_for_each_dev+0x10/0x10 [ 13.383880] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.383887] bus_add_driver+0x29e/0x4d0 [ 13.383895] driver_register+0x1a5/0x360 [ 13.383902] ? __pfx_hid_gyro_3d_platform_driver_init+0x10/0x10 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172] [ 13.383910] do_one_initcall+0xa7/0x380 [ 13.383919] ? __pfx_do_one_initcall+0x10/0x10 [ 13.383927] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.383933] ? kasan_unpoison+0x44/0x70 [ 13.383943] do_init_module+0x238/0x750 [ 13.383955] load_module+0x5011/0x6af0 [ 13.383962] ? kasan_save_stack+0x30/0x50 [ 13.383968] ? kasan_save_track+0x14/0x30 [ 13.383973] ? kasan_save_free_info+0x3b/0x60 [ 13.383980] ? poison_slab_object+0x109/0x180 [ 13.383993] ? __pfx_load_module+0x10/0x10 [ 13.384007] ? poison_slab_object+0x109/0x180 [ 13.384012] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.384018] ? init_module_from_file+0x13d/0x150 [ 13.384025] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.384032] ? init_module_from_file+0xdf/0x150 [ 13.384037] init_module_from_file+0xdf/0x150 [ 13.384044] ? __pfx_init_module_from_file+0x10/0x10 [ 13.384050] ? kasan_save_track+0x14/0x30 [ 13.384055] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.384060] ? kasan_save_free_info+0x3b/0x60 [ 13.384066] ? poison_slab_object+0x109/0x180 [ 13.384071] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.384080] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.384085] ? _raw_spin_lock+0x85/0xe0 [ 13.384091] ? __pfx__raw_spin_lock+0x10/0x10 [ 13.384096] ? __rseq_handle_notify_resume+0x1a6/0xad0 [ 13.384106] idempotent_init_module+0x23b/0x650 [ 13.384114] ? __pfx_idempotent_init_module+0x10/0x10 [ 13.384120] ? __pfx___seccomp_filter+0x10/0x10 [ 13.384129] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.384135] ? __fget_light+0x57/0x420 [ 13.384142] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.384147] ? security_capable+0x74/0xb0 [ 13.384157] __x64_sys_finit_module+0xbe/0x130 [ 13.384164] do_syscall_64+0x82/0x190 [ 13.384174] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.384179] ? irqtime_account_irq+0x3d/0x1f0 [ 13.384188] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.384193] ? __irq_exit_rcu+0x4e/0x130 [ 13.384201] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.384206] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 13.384212] RIP: 0033:0x7a21f96ade9d [ 13.384263] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 63 de 0c 00 f7 d8 64 89 01 48 [ 13.384267] RSP: 002b:00007ffeae934e78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 13.384273] RAX: ffffffffffffffda RBX: 00005987276bfcf0 RCX: 00007a21f96ade9d [ 13.384277] RDX: 0000000000000004 RSI: 00007a21f8eda376 RDI: 000000000000001c [ 13.384280] RBP: 00007a21f8eda376 R08: 0000000000000001 R09: 00007ffeae934ec0 [ 13.384284] R10: 0000000000000050 R11: 0000000000000246 R12: 0000000000020000 [ 13.384288] R13: 00005987276c1250 R14: 0000000000000000 R15: 00005987276c4530 [ 13.384297] </TASK> [ 13.384299] Modules linked in: soundwire_amd(+) hid_sensor_gyro_3d(+) hid_sensor_magn_3d hid_sensor_accel_3d soundwire_generic_allocation amdxcp hid_sensor_trigger drm_exec industrialio_triggered_buffer soundwire_bus gpu_sched kvm_amd kfifo_buf qmi_helpers joydev drm_buddy hid_sensor_iio_common mousedev snd_soc_core industrialio i2c_algo_bit mac80211 snd_compress drm_suballoc_helper kvm snd_hda_intel drm_ttm_helper ac97_bus snd_pcm_dmaengine snd_intel_dspcfg ttm thinkpad_acpi(+) snd_intel_sdw_acpi hid_sensor_hub snd_rpl_pci_acp6x drm_display_helper snd_hda_codec hid_multitouch libarc4 snd_acp_pci platform_profile think_lmi(+) hid_generic firmware_attributes_class wmi_bmof cec snd_acp_legacy_common sparse_keymap rapl snd_hda_core psmouse cfg80211 pcspkr snd_pci_acp6x snd_hwdep video snd_pcm snd_pci_acp5x snd_timer snd_rn_pci_acp3x ucsi_acpi snd_acp_config snd sp5100_tco rfkill snd_soc_acpi typec_ucsi thunderbolt amd_sfh k10temp mhi soundcore i2c_piix4 snd_pci_acp3x typec i2c_hid_acpi roles i2c_hid wmi acpi_tad amd_pmc [ 13.384454] mac_hid i2c_dev crypto_user loop nfnetlink zram ip_tables x_tables dm_crypt cbc encrypted_keys trusted asn1_encoder tee dm_mod crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic gf128mul ghash_clmulni_intel serio_raw sha512_ssse3 atkbd sha256_ssse3 libps2 sha1_ssse3 vivaldi_fmap nvme aesni_intel crypto_simd nvme_core cryptd ccp xhci_pci i8042 nvme_auth xhci_pci_renesas serio vfat fat btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq [ 13.384552] ---[ end trace 0000000000000000 ]--- KASAN reports a use-after-free of hid->driver_data in function amd_sfh_get_report(). The backtrace indicates that the function is called by amdtp_hid_request() which is one of the callbacks of hid device. The current make sure that driver_data is freed only once hid_destroy_device() returned. Note that I observed the crash both on v6.9.9 and v6.10.0. The code seems to be as it was from the early days of the driver. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-08-02hid-asus: add ROG Ally X prod ID to quirk listLuke D. Jones
The new ASUS ROG Ally X functions almost exactly the same as the previous model, so we can use the same quirks. Signed-off-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-08-02drm/test: fix the gem shmem test to map the sg table.Dave Airlie
The test here creates an sg table, but never maps it, when we get to drm_gem_shmem_free, the helper tries to unmap and this causes warnings on some platforms and debug kernels. This also sets a 64-bit dma mask, as I see an swiotlb warning if I stick with the default 32-bit one. Fixes: 93032ae634d4 ("drm/test: add a test suite for GEM objects backed by shmem") Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Marco Pagani <marpagan@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240715083551.777807-1-airlied@gmail.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-08-02drm/client: fix null pointer dereference in drm_client_modeset_probeMa Ke
In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is assigned to modeset->mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. Cc: stable@vger.kernel.org Fixes: cf13909aee05 ("drm/fb-helper: Move out modeset config code") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240802044736.1570345-1-make24@iscas.ac.cn
2024-08-02thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()Aapo Vienamo
Add missing free_page() call for the memory allocated by validate_and_copy_from_user(). Fixes: 6d241fa00159 ("thunderbolt: Add sideband register access to debugfs") Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2024-08-02Revert "nouveau: rip out busy fence waits"Dave Airlie
This reverts commit d45bb9c5f7a6f7b6e47939856b28cb1da0cdc119. Just got a report that this causes some suspend/resume issues, so back it out and I'll investigate it later. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-08-02Merge tag 'drm-misc-fixes-2024-08-01' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes A couple drm_panic fixes, several v3d fixes to increase the new timestamp API safety, several fixes for vmwgfx for various modesetting issues, PM fixes for ast, async flips improvements and two fixes for nouveau to fix resource refcounting and buffer placement. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240801-interesting-antique-bat-2fe4c0@houat
2024-08-01scsi: sd: Move sd_read_cpr() out of the q->limits_lock regionShin'ichiro Kawasaki
Commit 804e498e0496 ("sd: convert to the atomic queue limits API") introduced pairs of function calls to queue_limits_start_update() and queue_limits_commit_update(). These two functions lock and unlock q->limits_lock. In sd_revalidate_disk(), sd_read_cpr() is called after queue_limits_start_update() call and before queue_limits_commit_update() call. sd_read_cpr() locks q->sysfs_dir_lock and &q->sysfs_lock. Then new lock dependencies were created between q->limits_lock, q->sysfs_dir_lock and q->sysfs_lock, as follows: sd_revalidate_disk queue_limits_start_update mutex_lock(&q->limits_lock) sd_read_cpr disk_set_independent_access_ranges mutex_lock(&q->sysfs_dir_lock) mutex_lock(&q->sysfs_lock) mutex_unlock(&q->sysfs_lock) mutex_unlock(&q->sysfs_dir_lock) queue_limits_commit_update mutex_unlock(&q->limits_lock) However, the three locks already had reversed dependencies in other places. Then the new dependencies triggered the lockdep WARN "possible circular locking dependency detected" [1]. This WARN was observed by running the blktests test case srp/002. To avoid the WARN, move the sd_read_cpr() call in sd_revalidate_disk() after the queue_limits_commit_update() call. In other words, move the sd_read_cpr() call out of the q->limits_lock region. [1] https://lore.kernel.org/linux-scsi/vlmv53ni3ltwxplig5qnw4xsl2h6ccxijfbqzekx76vxoim5a5@dekv7q3es3tx/ Fixes: 804e498e0496 ("sd: convert to the atomic queue limits API") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20240801054234.540532-1-shinichiro.kawasaki@wdc.com Tested-by: Luca Coelho <luciano.coelho@intel.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-08-01scsi: ufs: core: Fix hba->last_dme_cmd_tstamp timestamp updating logicVamshi Gajjela
The ufshcd_add_delay_before_dme_cmd() always introduces a delay of MIN_DELAY_BEFORE_DME_CMDS_US between DME commands even when it's not required. The delay is added when the UFS host controller supplies the quirk UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS. Fix the logic to update hba->last_dme_cmd_tstamp to ensure subsequent DME commands have the correct delay in the range of 0 to MIN_DELAY_BEFORE_DME_CMDS_US. Update the timestamp at the end of the function to ensure it captures the latest time after any necessary delay has been applied. Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com> Link: https://lore.kernel.org/r/20240724135126.1786126-1-vamshigajjela@google.com Fixes: cad2e03d8607 ("ufs: add support to allow non standard behaviours (quirks)") Cc: stable@vger.kernel.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-08-02Merge tag 'drm-intel-fixes-2024-08-01' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - Static analysis fix for int overflow - Fix for HDCP2_STREAM_STATUS macro and removal of PWR_CLK_STATE for gen12 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZqslBkcZlInYdYgm@jlahtine-mobl.ger.corp.intel.com
generated by cgit (git 2.34.1) at 2025-10-01 09:51:36 +0000