summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-03-16igbvf: Regard vf reset nack as successAkihiko Odaki
vf reset nack actually represents the reset operation itself is performed but no address is assigned. Therefore, e1000_reset_hw_vf should fill the "perm_addr" with the zero address and return success on such an occasion. This prevents its callers in netdev.c from saying PF still resetting, and instead allows them to correctly report that no address is assigned. Fixes: 6ddbc4cf1f4d ("igb: Indicate failure on vf reset for empty mac address") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16intel/igbvf: free irq on the error path in igbvf_request_msix()Gaosheng Cui
In igbvf_request_msix(), irqs have not been freed on the err path, we need to free it. Fix it. Fixes: d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16igb: Enable SR-IOV after reinitAkihiko Odaki
Enabling SR-IOV causes the virtual functions to make requests to the PF via the mailbox. Notably, E1000_VF_RESET request will happen during the initialization of the VF. However, unless the reinit is done, the VMMB interrupt, which delivers mailbox interrupt from VF to PF will be kept masked and such requests will be silently ignored. Enable SR-IOV at the very end of the procedure to configure the device for SR-IOV so that the PF is configured properly for SR-IOV when a VF is activated. Fixes: fa44f2f185f7 ("igb: Enable SR-IOV configuration via PCI sysfs interface") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16igb: revert rtnl_lock() that causes deadlockLin Ma
The commit 6faee3d4ee8b ("igb: Add lock to avoid data race") adds rtnl_lock to eliminate a false data race shown below (FREE from device detaching) | (USE from netdev core) igb_remove | igb_ndo_get_vf_config igb_disable_sriov | vf >= adapter->vfs_allocated_count? kfree(adapter->vf_data) | adapter->vfs_allocated_count = 0 | | memcpy(... adapter->vf_data[vf] The above race will never happen and the extra rtnl_lock causes deadlock below [ 141.420169] <TASK> [ 141.420672] __schedule+0x2dd/0x840 [ 141.421427] schedule+0x50/0xc0 [ 141.422041] schedule_preempt_disabled+0x11/0x20 [ 141.422678] __mutex_lock.isra.13+0x431/0x6b0 [ 141.423324] unregister_netdev+0xe/0x20 [ 141.423578] igbvf_remove+0x45/0xe0 [igbvf] [ 141.423791] pci_device_remove+0x36/0xb0 [ 141.423990] device_release_driver_internal+0xc1/0x160 [ 141.424270] pci_stop_bus_device+0x6d/0x90 [ 141.424507] pci_stop_and_remove_bus_device+0xe/0x20 [ 141.424789] pci_iov_remove_virtfn+0xba/0x120 [ 141.425452] sriov_disable+0x2f/0xf0 [ 141.425679] igb_disable_sriov+0x4e/0x100 [igb] [ 141.426353] igb_remove+0xa0/0x130 [igb] [ 141.426599] pci_device_remove+0x36/0xb0 [ 141.426796] device_release_driver_internal+0xc1/0x160 [ 141.427060] driver_detach+0x44/0x90 [ 141.427253] bus_remove_driver+0x55/0xe0 [ 141.427477] pci_unregister_driver+0x2a/0xa0 [ 141.428296] __x64_sys_delete_module+0x141/0x2b0 [ 141.429126] ? mntput_no_expire+0x4a/0x240 [ 141.429363] ? syscall_trace_enter.isra.19+0x126/0x1a0 [ 141.429653] do_syscall_64+0x5b/0x80 [ 141.429847] ? exit_to_user_mode_prepare+0x14d/0x1c0 [ 141.430109] ? syscall_exit_to_user_mode+0x12/0x30 [ 141.430849] ? do_syscall_64+0x67/0x80 [ 141.431083] ? syscall_exit_to_user_mode_prepare+0x183/0x1b0 [ 141.431770] ? syscall_exit_to_user_mode+0x12/0x30 [ 141.432482] ? do_syscall_64+0x67/0x80 [ 141.432714] ? exc_page_fault+0x64/0x140 [ 141.432911] entry_SYSCALL_64_after_hwframe+0x72/0xdc Since the igb_disable_sriov() will call pci_disable_sriov() before releasing any resources, the netdev core will synchronize the cleanup to avoid any races. This patch removes the useless rtnl_(un)lock to guarantee correctness. CC: stable@vger.kernel.org Fixes: 6faee3d4ee8b ("igb: Add lock to avoid data race") Reported-by: Corinna Vinschen <vinschen@redhat.com> Link: https://lore.kernel.org/intel-wired-lan/ZAcJvkEPqWeJHO2r@calimero.vinschen.de/ Signed-off-by: Lin Ma <linma@zju.edu.cn> Tested-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16iavf: do not track VLAN 0 filtersAhmed Zaki
When an interface with the maximum number of VLAN filters is brought up, a spurious error is logged: [257.483082] 8021q: adding VLAN 0 to HW filter on device enp0s3 [257.483094] iavf 0000:00:03.0 enp0s3: Max allowed VLAN filters 8. Remove existing VLANs or disable filtering via Ethtool if supported. The VF driver complains that it cannot add the VLAN 0 filter. On the other hand, the PF driver always adds VLAN 0 filter on VF initialization. The VF does not need to ask the PF for that filter at all. Fix the error by not tracking VLAN 0 filters altogether. With that, the check added by commit 0e710a3ffd0c ("iavf: Fix VF driver counting VLAN 0 filters") in iavf_virtchnl.c is useless and might be confusing if left as it suggests that we track VLAN 0. Fixes: 0e710a3ffd0c ("iavf: Fix VF driver counting VLAN 0 filters") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16iavf: fix non-tunneled IPv6 UDP packet type and hashingAlexander Lobakin
Currently, IAVF's decode_rx_desc_ptype() correctly reports payload type of L4 for IPv4 UDP packets and IPv{4,6} TCP, but only L3 for IPv6 UDP. Originally, i40e, ice and iavf were affected. Commit 73df8c9e3e3d ("i40e: Correct UDP packet header for non_tunnel-ipv6") fixed that in i40e, then commit 638a0c8c8861 ("ice: fix incorrect payload indicator on PTYPE") fixed that for ice. IPv6 UDP is L4 obviously. Fix it and make iavf report correct L4 hash type for such packets, so that the stack won't calculate it on CPU when needs it. Fixes: 206812b5fccb ("i40e/i40evf: i40e implementation for skb_set_hash") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16iavf: fix inverted Rx hash condition leading to disabled hashAlexander Lobakin
Condition, which checks whether the netdev has hashing enabled is inverted. Basically, the tagged commit effectively disabled passing flow hash from descriptor to skb, unless user *disables* it via Ethtool. Commit a876c3ba59a6 ("i40e/i40evf: properly report Rx packet hash") fixed this problem, but only for i40e. Invert the condition now in iavf and unblock passing hash to skbs again. Fixes: 857942fd1aa1 ("i40e: Fix Rx hash reported to the stack by our driver") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16fbdev: Use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2023-03-16fbdev: au1200fb: Fix potential divide by zeroWei Chen
var->pixclock can be assigned to zero by user. Without proper check, divide by zero would occur when invoking macro PICOS2KHZ in au1200fb_fb_check_var. Error out if var->pixclock is zero. Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-03-16fbdev: lxfb: Fix potential divide by zeroWei Chen
var->pixclock can be assigned to zero by user. Without proper check, divide by zero would occur in lx_set_clock. Error out if var->pixclock is zero. Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-03-16fbdev: intelfb: Fix potential divide by zeroWei Chen
Variable var->pixclock is controlled by user and can be assigned to zero. Without proper check, divide by zero would occur in intelfbhw_validate_mode and intelfbhw_mode_to_hw. Error out if var->pixclock is zero. Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-03-16fbdev: nvidia: Fix potential divide by zeroWei Chen
variable var->pixclock can be set by user. In case it equals to zero, divide by zero would occur in nvidiafb_set_par. Similar crashes have happened in other fbdev drivers. There is no check and modification on var->pixclock along the call chain to nvidia_check_var and nvidiafb_set_par. We believe it could also be triggered in driver nvidia from user site. Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-03-16fbdev: stifb: Provide valid pixelclock and add fb_check_var() checksHelge Deller
Find a valid modeline depending on the machine graphic card configuration and add the fb_check_var() function to validate Xorg provided graphics settings. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
2023-03-16Merge tag 'nvme-6.3-2022-03-16' of git://git.infradead.org/nvme into block-6.3Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.3 - avoid potential UAF in nvmet_req_complete (Damien Le Moal) - more quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen) - fix a memory leak in the nvme-pci probe teardown path (Irvin Cote) - repair the MAINTAINERS entry (Lukas Bulwahn) - fix handling single range discard request (Ming Lei) - show more opcode names in trace events (Minwoo Im) - fix nvme-tcp timeout reporting (Sagi Grimberg)" * tag 'nvme-6.3-2022-03-16' of git://git.infradead.org/nvme: nvmet: avoid potential UAF in nvmet_req_complete() nvme-trace: show more opcode names nvme-tcp: add nvme-tcp pdu size build protection nvme-tcp: fix opcode reporting in the timeout handler nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620 nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000 nvme-pci: fixing memory leak in probe teardown path nvme: fix handling single range discard request MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS
2023-03-16usb: gadget: Use correct endianness of the wLength field for WebUSBAndy Shevchenko
WebUSB code uses wLength directly without proper endianness conversion. Update it to use already prepared temporary variable w_length instead. Fixes: 93c473948c58 ("usb: gadget: add WebUSB landing page support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-By: Jó Ágila Bitsch <jgilab@gmail.com> Link: https://lore.kernel.org/r/20230313154522.52684-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2Yaroslav Furman
Just like other JMicron JMS5xx enclosures, it chokes on report-opcodes, let's avoid them. Signed-off-by: Yaroslav Furman <yaro330@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230312090745.47962-1-yaro330@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driverPawel Laszczak
Patch changes CDNS_DEVICE_ID in USBSSP PCI Glue driver to remove the conflict with Cadence USBSS driver. cc: <stable@vger.kernel.org> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20230309063048.299378-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16usb: cdns3: Fix issue with using incorrect PCI device functionPawel Laszczak
PCI based platform can have more than two PCI functions. USBSS PCI Glue driver during initialization should consider only DRD/HOST/DEVICE PCI functions and all other should be ignored. This patch adds additional condition which causes that only DRD and HOST/DEVICE function will be accepted. cc: <stable@vger.kernel.org> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20230308124427.311245-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16usb: cdnsp: Fixes issue with redundant Status StagePawel Laszczak
In some cases, driver trees to send Status Stage twice. The first one from upper layer of gadget usb subsystem and second time from controller driver. This patch fixes this issue and remove tricky handling of SET_INTERFACE from controller driver which is no longer needed. cc: <stable@vger.kernel.org> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20230307111420.376056-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16xen: remove unnecessary (void*) conversionsYu Zhe
Pointer variables of void * type do not require type cast. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230316083954.4223-1-yuzhe@nfschina.com Signed-off-by: Juergen Gross <jgross@suse.com>
2023-03-16Merge tag 'icc-6.3-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Georgi writes: interconnect fixes for v6.3-rc This contains a bunch of fixes with the highlight being fixes for a race condition that could sometimes occur during the interconnect provider driver registration. There are also fixes for memory overallocation and a memory leak. - interconnect: qcom: osm-l3: fix icc_onecell_data allocation - interconnect: qcom: sm8450: switch to qcom_icc_rpmh_* function - interconnect: qcom: sm8550: switch to qcom_icc_rpmh_* function - interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT - interconnect: fix mem leak when freeing nodes - interconnect: fix icc_provider_del() error handling - interconnect: fix provider registration API - interconnect: imx: fix registration race - interconnect: qcom: osm-l3: fix registration race - interconnect: qcom: rpm: fix probe child-node error handling - interconnect: qcom: rpm: fix registration race - interconnect: qcom: rpmh: fix probe child-node error handling - interconnect: qcom: rpmh: fix registration race - interconnect: qcom: msm8974: fix registration race - interconnect: exynos: fix node leak in probe PM QoS error path - interconnect: exynos: fix registration race - interconnect: exynos: drop redundant link destroy - memory: tegra: fix interconnect registration race - memory: tegra124-emc: fix interconnect registration race - memory: tegra20-emc: fix interconnect registration race - memory: tegra30-emc: fix interconnect registration race Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: (21 commits) memory: tegra30-emc: fix interconnect registration race memory: tegra20-emc: fix interconnect registration race memory: tegra124-emc: fix interconnect registration race memory: tegra: fix interconnect registration race interconnect: exynos: drop redundant link destroy interconnect: exynos: fix registration race interconnect: exynos: fix node leak in probe PM QoS error path interconnect: qcom: msm8974: fix registration race interconnect: qcom: rpmh: fix registration race interconnect: qcom: rpmh: fix probe child-node error handling interconnect: qcom: rpm: fix registration race interconnect: qcom: rpm: fix probe child-node error handling interconnect: qcom: osm-l3: fix registration race interconnect: imx: fix registration race interconnect: fix provider registration API interconnect: fix icc_provider_del() error handling interconnect: fix mem leak when freeing nodes interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT interconnect: qcom: sm8550: switch to qcom_icc_rpmh_* function interconnect: qcom: sm8450: switch to qcom_icc_rpmh_* function ...
2023-03-16ata: pata_parport: fix memory leaksOndrej Zary
When ida_alloc() fails, "pi" is not freed although the misleading comment says otherwise. Move the ida_alloc() call up so we really don't have to free "pi" in case of ida_alloc() failure. Also move ida_free() call from pi_remove_one() to pata_parport_dev_release(). It was dereferencing already freed dev pointer. Testing revealed leak even in non-failure case which was tracked down to missing put_device() call after bus_find_device_by_name(). As a result, pata_parport_dev_release() was never called. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202303111822.IHNchbkp-lkp@intel.com/ Signed-off-by: Ondrej Zary <linux@zary.sk> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2023-03-16wifi: iwlwifi: Avoid disabling GCC specific flag with clangNathan Chancellor
Clang errors: drivers/net/wireless/intel/iwlwifi/iwl-devtrace.c:15:32: error: unknown warning group '-Wsuggest-attribute=format', ignored [-Werror,-Wunknown-warning-option] #pragma GCC diagnostic ignored "-Wsuggest-attribute=format" ^ 1 error generated. The warning being disabled by this pragma is GCC specific. Guard its use with CONFIG_CC_IS_GCC so that it is not used with clang to clear up the error. Fixes: 4eca8cbf7ba8 ("wifi: iwlwifi: suppress printf warnings in tracing") Link: https://github.com/ClangBuiltLinux/linux/issues/1818 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230315-iwlwifi-fix-pragma-v1-1-ad23f92c4739@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-15net: phy: micrel: Fix spelling mistake "minimim" -> "minimum"Colin Ian King
There is a spelling mistake in a pr_warn_ratelimited message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20230314082315.26532-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15nfp: flower: offload tc flows of multiple conntrack zonesWentao Jia
If goto_chain action present in the post ct flow rule, merge flow rules in this ct-zone, create a new pre_ct entry as the pre ct flow rule of next ct-zone, but do not offload merged flow rules to firmware. Repeat the process in the next ct-zone until no goto_chain action present in the post ct flow rule in a certain ct-zone, merged all the flow rules. Offload to firmware finally. Signed-off-by: Wentao Jia <wentao.jia@corigine.com> Acked-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15nfp: flower: prepare for parameterisation of number of offload rulesWentao Jia
The fixed number of offload flow rule is only supported scenario of one ct zone, in the scenario of multiple ct zones, dynamic number and more number of offload flow rules are required. In order to support scenario of multiple ct zones, parameter num_rules is added for to offload flow rules Signed-off-by: Wentao Jia <wentao.jia@corigine.com> Acked-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15nfp: flower: add goto_chain_index for ct entryWentao Jia
The chain_index has different means in pre ct entry and post ct entry. In pre ct entry, it means chain index, but in post ct entry, it means goto chain index, it is confused. chain_index and goto_chain_index may be present in one flow rule, It cannot be distinguished by one field chain_index, both chain_index and goto_chain_index are required in the follow-up patch to support multiple ct zones Another field goto_chain_index is added to record the goto chain index. If no goto action in post ct entry, goto_chain_index is 0. Signed-off-by: Wentao Jia <wentao.jia@corigine.com> Acked-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15nfp: flower: refactor function "is_post_ct_flow"Wentao Jia
'ct_clear' action only or no ct action is supported for 'post_ct_flow'. But in scenario of multiple ct zones, one non 'ct_clear' ct action or more ct actions, including 'ct_clear action', may be present in one flow rule. If ct state match key is 'ct_established', the flow rule is still expected to be classified as 'post_ct_flow'. Check ct status first in function "is_post_ct_flow" to achieve this. Signed-off-by: Wentao Jia <wentao.jia@corigine.com> Acked-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15nfp: flower: refactor function "is_pre_ct_flow"Wentao Jia
In the scenario of multiple ct zones, ct state key match and ct action is present in one flow rule, the flow rule is classified to post_ct_flow in design. There is no ct state key match for pre ct flow, the judging condition is added to function "is_pre_ct_flow". Chain_index is another field for judging which flows are pre ct flow If chain_index not 0, the flow is not pre ct flow. Signed-off-by: Wentao Jia <wentao.jia@corigine.com> Acked-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15nfp: flower: add get_flow_act_ct() for ct actionWentao Jia
CT action is a special case different from other actions, CT clear action is not required when get ct action, but this case is not considered. If CT clear action in the flow rule, skip the CT clear action when get ct action, return the first ct action that is not a CT clear action Signed-off-by: Wentao Jia <wentao.jia@corigine.com> Acked-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5e: Enable TC offload for egress MACVLAN over bondMaor Dickman
Support offloading of TC rules that mirror/redirect egress traffic to a MACVLAN device, which is attached to bond device which master mlx5 devices. Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-16-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5e: Enable TC offload for ingress MACVLAN over bondMaor Dickman
Support offloading of TC rules that filter ingress traffic from a MACVLAN device, which is attached to bond device. Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-15-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5e: TC, Extract indr setup block checks to functionMaor Dickman
In preparation for next patch which will add new check if device block can be setup, extract all existing checks to function to make it more readable and maintainable. Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-14-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5e: Add more information to hairpin table dumpGal Pressman
Print the number of hairpin queues and size as part of the hairpin table dump. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-13-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5e: Add devlink hairpin queues parametersGal Pressman
We refer to a TC NIC rule that involves forwarding as "hairpin". Hairpin queues are mlx5 hardware specific implementation for hardware forwarding of such packets. Per the discussion in [1], move the hairpin queues control (number and size) from debugfs to devlink. Expose two devlink params: - hairpin_num_queues: control the number of hairpin queues - hairpin_queue_size: control the size (in packets) of the hairpin queues [1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/ Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-12-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5: Move needed PTYS functions to core layerGal Pressman
Downstream patches require devlink params to access the PTYS register, move the needed functions from mlx5e to the core layer. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-11-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5e: Add XSK RQ state flag for RQ devlink health diagnosticsAdham Faris
Currently RQ health diagnostics doesn't inform the user whether an RQ is an XSK RQ or not. Address this, by adding XSK state flag to RQ SW state enum in core/en.h. XSK will be '1' if current RQ is an XSK RQ, and it will be '0' if it's not. In this example below, it can be seen that XSK field value is '1' since xdpsock program have been attached to channel 0 before issuing the devlink query command: $ devlink health diagnose auxiliary/mlx5_core.eth.0/65535 reporter rx Output: ======================================================================= Common config: RQ: type: 2 stride size: 4096 size: 16 ts_format: FRC CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 4236 HW state: 1 WQE counter: 15 posted WQEs: 15 cc: 15 SW State: enabled: 1 recovering: 0 am: 1 no_csum_complete: 1 csum_full: 0 mini_cqe_hw_stridx: 1 shampo: 0 mini_cqe_enhanced: 0 xsk: 1 CQ: cqn: 1085 HW status: 0 ci: 0 size: 1024 EQ: eqn: 7 irqn: 32 vecidx: 0 ci: 5 size: 2048 ICOSQ: sqn: 4229 HW state: 1 cc: 158 pc: 158 WQE size: 2048 CQ: cqn: 1080 cc: 1 size: 2048 Signed-off-by: Adham Faris <afaris@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-10-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5e: Expose SQ SW state as part of SQ health diagnosticsAdham Faris
Add SQ SW state textual representation to devlink health diagnostics for tx reporter. SQ SW state can be retrieved by issuing the devlink command below: $ devlink health diagnose auxiliary/mlx5_core.eth.0/65535 reporter tx Output ======================================================================= Common Config: SQ: stride size: 64 size: 1024 ts_format: FRC CQ: stride size: 64 size: 1024 SQs: channel ix: 0 tc: 0 txq ix: 0 sqn: 4170 HW state: 1 stopped: false cc: 0 pc: 0 SW State: enabled: 1 mpwqe: 1 recovering: 0 ipsec: 0 am: 1 vlan_need_l2_inline: 1 pending_xsk_tx: 0 pending_tls_rx_resync: 0 xdp_multibuf: 0 CQ: cqn: 1031 HW status: 0 ci: 0 size: 1024 EQ: eqn: 7 irqn: 32 vecidx: 0 ci: 2 size: 2048 Signed-off-by: Adham Faris <afaris@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-9-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5e: Stringify RQ SW state in RQ devlink health diagnosticsAdham Faris
One of the parameters that is retrieved/printed as a response to devlink health diagnostics for rx reporter is the RQ SW state. It's printed as a bitmap decimal number. Printing it as bitmap is problematic and non informative. In addition User can't count on SW state without accessing the kernel sources (mlx5e rq state enum in en.h). This patch prints RQ SW state in a textual representation, as a key: value pairs, where disabled rq states will appear as '0' and enabled ones will appear as '1'. See below the generated output for rx health diagnostics devlink command: $ devlink health diagnose auxiliary/mlx5_core.eth.0/65535 reporter rx Before: ======================================================================= Common config: RQ: type: 2 stride size: 2048 size: 8 ts_format: FRC CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 4172 HW state: 1 SW state: 37 WQE counter: 7 posted WQEs: 7 cc: 7 CQ: cqn: 1033 HW status: 0 ci: 0 size: 1024 EQ: eqn: 7 irqn: 32 vecidx: 0 ci: 2 size: 2048 ICOSQ: sqn: 4169 HW state: 1 cc: 74 pc: 74 WQE size: 128 CQ: cqn: 1030 cc: 1 size: 128 channel ix: 1 ... . . After: ======================================================================= Common config: RQ: type: 2 stride size: 2048 size: 8 ts_format: FRC CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 4172 HW state: 1 WQE counter: 7 posted WQEs: 7 cc: 7 SW State: enabled: 1 recovering: 0 am: 1 no_csum_complete: 0 csum_full: 0 mini_cqe_hw_stridx: 1 shampo: 0 mini_cqe_enhanced: 0 CQ: cqn: 1033 HW status: 0 ci: 0 size: 1024 EQ: eqn: 7 irqn: 32 vecidx: 0 ci: 2 size: 2048 ICOSQ: sqn: 4169 HW state: 1 cc: 74 pc: 74 WQE size: 128 CQ: cqn: 1030 cc: 1 size: 128 channel: ix: 1 ... . . Signed-off-by: Adham Faris <afaris@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-8-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5e: Rename RQ/SQ adaptive moderation state flagAdham Faris
Dynamic interrupt moderation RQ and SQ feature represented by MLX5E_RQ_STATE_AM and MLX5E_SQ_STATE_AM enums respectively, is not consistent with the feature naming in the driver, and with the formal feature and library names. Hence, change MLX5E_RQ_STATE_AM and MLX5E_SQ_STATE_AM enum type names in core/en.h to MLX5E_RQ_STATE_DIM and MLX5E_SQ_STATE_DIM respectively. Signed-off-by: Adham Faris <afaris@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-7-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5e: Utilize the entire fifoRahul Rameshbabu
Previous check was comparing against the fifo mask. The mask is size of the fifo (power of two) minus one, so a less than or equal comparator should be used for checking if the fifo has room for the SKB. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-6-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5: Implement thermal zoneSandipan Patra
Implement thermal zone support for mlx5 based HW. The NIC uses temperature sensor provided by ASIC to report current temperature to thermal core. Signed-off-by: Sandipan Patra <spatra@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-5-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5: Add comment to mlx5_devlink_params_register()Jiri Pirko
Add comment to mlx5_devlink_params_register() functions so it is clear that only driver init params should be registered here. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-4-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5: Stop waiting for PCI up if teardown was triggeredMoshe Shemesh
If driver teardown is called while PCI is turned off, there is a race between health recovery and teardown. If health recovery already started it will wait 60 sec trying to see if PCI gets back and it can recover, but actually there is no need to wait anymore once teardown was called. Use the MLX5_BREAK_FW_WAIT flag which is set on driver teardown to break waiting for PCI up. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-3-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5: remove redundant clear_bitMoshe Shemesh
When shutdown or remove callbacks are called the driver sets the flag MLX5_BREAK_FW_WAIT, to stop waiting for FW as teardown was called. There is no need to clear the bit as once shutdown or remove were called as there is no way back, the driver is going down. Furthermore, if not cleared the flag can be used also in other loops where we may wait while teardown was already called. Use test_bit() instead of test_and_clear_bit() as there is no need to clear the flag. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-2-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net: phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()Vladimir Oltean
Since the blamed commit, phy_ethtool_get_wol() and phy_ethtool_set_wol() acquire phydev->lock, but the mscc phy driver implementations, vsc85xx_wol_get() and vsc85xx_wol_set(), acquire the same lock as well, resulting in a deadlock. $ ip link set swp3 down ============================================ WARNING: possible recursive locking detected mscc_felix 0000:00:00.5 swp3: Link is Down -------------------------------------------- ip/375 is trying to acquire lock: ffff3d7e82e987a8 (&dev->lock){+.+.}-{4:4}, at: vsc85xx_wol_get+0x2c/0xf4 but task is already holding lock: ffff3d7e82e987a8 (&dev->lock){+.+.}-{4:4}, at: phy_ethtool_get_wol+0x3c/0x6c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&dev->lock); lock(&dev->lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by ip/375: #0: ffffd43b2a955788 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg+0x144/0x58c #1: ffff3d7e82e987a8 (&dev->lock){+.+.}-{4:4}, at: phy_ethtool_get_wol+0x3c/0x6c Call trace: __mutex_lock+0x98/0x454 mutex_lock_nested+0x2c/0x38 vsc85xx_wol_get+0x2c/0xf4 phy_ethtool_get_wol+0x50/0x6c phy_suspend+0x84/0xcc phy_state_machine+0x1b8/0x27c phy_stop+0x70/0x154 phylink_stop+0x34/0xc0 dsa_port_disable_rt+0x2c/0xa4 dsa_slave_close+0x38/0xec __dev_close_many+0xc8/0x16c __dev_change_flags+0xdc/0x218 dev_change_flags+0x24/0x6c do_setlink+0x234/0xea4 __rtnl_newlink+0x46c/0x878 rtnl_newlink+0x50/0x7c rtnetlink_rcv_msg+0x16c/0x58c Removing the mutex_lock(&phydev->lock) calls from the driver restores the functionality. Fixes: 2f987d486610 ("net: phy: Add locks to ethtool functions") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230314153025.2372970-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net: phy: micrel: drop superfluous use of temp variableWolfram Sang
'temp' was used before commit c0c99d0cd107 ("net: phy: micrel: remove the use of .ack_interrupt()") refactored the code. Now, we can simplify it a little. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230314124928.44948-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net: phy: update obsolete comment about PHY_STARTINGWolfram Sang
Commit 899a3cbbf77a ("net: phy: remove states PHY_STARTING and PHY_PENDING") missed to update a comment in phy_probe. Remove superfluous "Description:" prefix while we are here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20230314124856.44878-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: refactor mailbox overflow detection Jake Keller says: The primary motivation of this series is to cleanup and refactor the mailbox overflow detection logic such that it will work with Scalable IOV. In addition a few other minor cleanups are done while I was working on the code in the area. First, the mailbox overflow functions in ice_vf_mbx.c are refactored to store the data per-VF as an embedded structure in struct ice_vf, rather than stored separately as a fixed-size array which only works with Single Root IOV. This reduces the overall memory footprint when only a handful of VFs are used. The overflow detection functions are also cleaned up to reduce the need for multiple separate calls to determine when to report a VF as potentially malicious. Finally, the ice_is_malicious_vf function is cleaned up and moved into ice_virtchnl.c since it is not Single Root IOV specific, and thus does not belong in ice_sriov.c I could probably have done this in fewer patches, but I split pieces out to hopefully aid in reviewing the overall sequence of changes. This does cause some additional thrash as it results in intermediate versions of the refactor, but I think its worth it for making each step easier to understand. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: call ice_is_malicious_vf() from ice_vc_process_vf_msg() ice: move ice_is_malicious_vf() to ice_virtchnl.c ice: print message if ice_mbx_vf_state_handler returns an error ice: pass mbxdata to ice_is_malicious_vf() ice: remove unnecessary &array[0] and just use array ice: always report VF overflowing mailbox even without PF VSI ice: declare ice_vc_process_vf_msg in ice_virtchnl.h ice: initialize mailbox snapshot earlier in PF init ice: merge ice_mbx_report_malvf with ice_mbx_vf_state_handler ice: remove ice_mbx_deinit_snapshot ice: move VF overflow message count into struct ice_mbx_vf_info ice: track malicious VFs in new ice_mbx_vf_info structure ice: convert ice_mbx_clear_malvf to void and use WARN ice: re-order ice_mbx_reset_snapshot function ==================== Link: https://lore.kernel.org/r/20230313182123.483057-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15ptp: ines: drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/ptp/ptp_ines.c:783:34: error: ‘ines_ptp_ctrl_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20230312132637.352755-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-22 01:13:37 +0000