| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a number of updates for devicetree files for Qualcomm,
Rockchips, and NXP i.MX platforms, addressing mistakes in the DT
contents:
- Wrong GPIO polarity on some boards
- Lower SD card interface speed for better stability
- Incorrect power supply, clock, pmic, cache properties
- Disable broken hbr3 on sc7280-herobrine
- Devicetree warning fixes
The only other changes are:
- A regression fix for the Amlogic performance monitoring unit
driver, along with two related DT changes.
- imx_v6_v7_defconfig enables PCI support again.
- Trivial fixes for tee, optee and psci firmware drivers, addressing
compiler warning and error output"
* tag 'arm-fixes-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
firmware/psci: demote suspend-mode warning to info level
arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
arm64: dts: imx8mp-verdin: correct off-on-delay
arm64: dts: imx8mm-verdin: correct off-on-delay
arm64: dts: imx8mm-evk: correct pmic clock source
arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
tee: Pass a pointer to virt_to_page()
perf/amlogic: adjust register offsets
arm64: dts: meson-g12-common: resolve conflict between canvas & pmu
arm64: dts: meson-g12-common: specify full DMC range
arm64: dts: imx8mp: fix address length for LCDIF2
riscv: dts: canaan: drop invalid spi-max-frequency
...
|
|
Start supporting API version 78 for AX devices.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.5a4dcbf5a2c1.I125808566fe892ee0865e392bf1b1872daafe8ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Check the firmware response size for responses to the
memory read/write command in debugfs before using it.
Fixes: 2b55f43f8e47 ("iwlwifi: mvm: Add mem debugfs entry")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.0d56fcaf68ee.I70e9571f3ed7263929b04f8fabad23c9b999e4ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For MLO support, use the pointer to the peer MLD instead of the default
link station id, since the default link is only used for non-MLO cases.
Using the default link sta id is meaningless for MLO. Also remove the
rcu protected section since we now avoid the lookup based on sta id.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.40cef48c0592.I8dd666d603d6e1854033e5369c70e78d9303d236@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the AP station already exists on link activation (which
means we're during link switch), configure the TLC in FW so
we can immediately transmit once the link is activated.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.1a93de9b7c1f.I42022f24bbe3572f5a082da8c99794ae14281875@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For MLO, we cannot use vif->bss_conf.chandef.chan->band, since
that will lead to a NULL-ptr dereference as bss_conf isn't used.
However, in case of real MLO, we also need to take both LMACs
into account if they exist, since the station might be active
on both LMACs at the same time.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.3588afc85d79.I11592893bbc191b9548518b8bd782de568a9f848@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Track instead whether or not the station was authorized, that's
clearer than trying to indicate in the code whether or not the
full bandwidth should be used via an 'update' argument.
While at it, give rs_fw_rate_init() the iwl_mvm_ prefix.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.92bd8d36e311.I1877a109104d5ffeaaad6a623e89f0c44decc38e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When allocating a new link station, initialize the ratescaling
data for it. To do that, refactor the initialization code out
into a new iwl_mvm_rs_add_sta_link() function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.441b6a8c60fd.I34f1b3555c25aaa22cc34d1112fc3b6393a20b7c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We need to look up the correct version of this struct depending
on the interface type, rather than just checking if the pointer
is non-NULL. Fix that.
Fixes: befebbb30af0 ("iwlwifi: rs: consider LDPC capability in case of HE")
Fixes: b009cf71a982 ("iwlwifi: mvm: only enable HE DCM if we also support TX")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.1fd54368a02c.Ie4db5e8ae224d9a4a63b528da5d63e1b957b9cef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since only clients to an AP can be 20MHz-only STAs, adjust the
code to not make the use of EHT capabilities depend on only the
bandwidth, but also the type of interface.
Fixes: 701404f1091d ("wifi: iwlwifi: rs: add support for parsing max MCS per NSS/BW in 11be")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.a3a4c931e4a3.I693a07f4d88044c889eee04793883a83bc5ee362@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When this is called it might crash due to the use of
deflink's phy context, update all links instead. It
really shouldn't be called right now though, but it's
better to have safer code until we update this to be
with a link parameter.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.fd47d0de8319.I87c5e5bcb2fadd70acc32021eed394fc1eea12a4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When we first add the STA before sending an authentication
frame this is false. However, in some cases such as FT or
certainly in MLO link switch scenarios, it will be true.
If it happens to be true, it causes a firmware assert (in
LMAC, 0x2528), because the same bit is used by the firmware
for tracking this setting as well as for tracking if the
management key has been installed, and then we get this
assert from the firmware when installing the MFP key as it
thinks it has already been installed.
Remove the setting for now, until the firmware disentangles
the two. We should be able to set it, in fact we should be
setting it speculatively before authentication/association,
to avoid processing management frames that should have been
protected/encrypted before the key is set.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.adbeb0e0bfed.I400d0ee3721dc4f294313be992d277ba4d9c88d9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We can allow NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT since we
just use the elements from mac80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.88b1a70365fd.If5030437707ab67e2146291c1517a9b0e31d01ab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
A long time, ago in commit 818965d39177 ("cfg80211: Allow a
scan request for a specific BSSID"), the stack started passing
the BSSID that should be scanned for. Use it in iwlwifi for the
intended optimisation, and to also allow the use of this for an
implementation sending multi-link probe requests.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.0be90360cad7.If279c28079a1db34280a824cee7c3f6545fd8b9e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The restriction where MAC ID 0 could be used only for the
managed/IBSS vif is not required when using the new MLO FW API.
Update the driver.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.e4355615da92.Iba934ccf8589c3c27a25a390dc5e938312889b45@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware no longer wants the beacon template inside the MAC command.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.92aed4180a06.I277efa343c88081cb3fc890dcbeae3161cdffe16@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Function mlxfw_mfa2_tlv_multi_get() returns NULL if 'tlv' in
question does not pass checks in mlxfw_mfa2_tlv_payload_get(). This
behaviour may lead to NULL pointer dereference in 'multi->total_len'.
Fix this issue by testing mlxfw_mfa2_tlv_multi_get()'s return value
against NULL.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230417120718.52325-1-n.zhandarovich@fintech.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
dwmac supports multiple modess. When working under rmii and rgmii,
you need to set different phy interfaces.
According to the dwmac document, when working in rmii, it needs to be
set to 0x4, and rgmii needs to be set to 0x1.
The phy interface needs to be set in syscon, the format is as follows:
starfive,syscon: <&syscon, offset, shift>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds StarFive dwmac driver support on the StarFive JH7110 SoC.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add "snps,dwmac-5.20" compatible string for 5.20 version that can avoid
to define some platform data in the glue layer.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use new net core macro netif_subqueue_completed_wake to simplify
the code of the tx cleanup path.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use new net core macro netif_subqueue_maybe_stop in the start_xmit path
to simplify the code. Whilst at it, set the tx queue start threshold to
twice the stop threshold. Before values were the same, resulting in
stopping/starting the queue more often than needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the driver unload path, the driver currently checks the valid
BNXT_FLAG_ROCE_CAP flag in bnxt_rdma_aux_device_uninit() before
proceeding. This is flawed because the flag may not be set initially
during driver load. It may be set later after the NVRAM setting is
changed followed by a firmware reset. Relying on the
BNXT_FLAG_ROCE_CAP flag may crash in bnxt_rdma_aux_device_uninit() if
the aux device was never initialized:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 8ae6aa067 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 39 PID: 42558 Comm: rmmod Kdump: loaded Tainted: G OE --------- - - 4.18.0-348.el8.x86_64 #1
Hardware name: Dell Inc. PowerEdge R750/0WT8Y6, BIOS 1.5.4 12/17/2021
RIP: 0010:device_del+0x1b/0x410
Code: 89 a5 50 03 00 00 4c 89 a5 58 03 00 00 eb 89 0f 1f 44 00 00 41 56 41 55 41 54 4c 8d a7 80 00 00 00 55 53 48 89 fb 48 83 ec 18 <48> 8b 2f 4c 89 e7 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0
RSP: 0018:ff7f82bf469a7dc8 EFLAGS: 00010292
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000206 RDI: 0000000000000000
RBP: ff31b7cd114b0ac0 R08: 0000000000000000 R09: ffffffff935c3400
R10: ff31b7cd45bc3440 R11: 0000000000000001 R12: 0000000000000080
R13: ffffffffc1069f40 R14: 0000000000000000 R15: 0000000000000000
FS: 00007fc9903ce740(0000) GS:ff31b7d4ffac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000992fee004 CR4: 0000000000773ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
bnxt_rdma_aux_device_uninit+0x1f/0x30 [bnxt_en]
bnxt_remove_one+0x2f/0x1f0 [bnxt_en]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x103/0x1f0
driver_detach+0x54/0x88
bus_remove_driver+0x77/0xc9
pci_unregister_driver+0x2d/0xb0
bnxt_exit+0x16/0x2c [bnxt_en]
__x64_sys_delete_module+0x139/0x280
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7fc98f3af71b
Fix this by modifying the check inside bnxt_rdma_aux_device_uninit()
to check for bp->aux_priv instead. We also need to make some changes
in bnxt_rdma_aux_device_init() to make sure that bp->aux_priv is set
only when the aux device is fully initialized.
Fixes: d80d88b0dfff ("bnxt_en: Add auxiliary driver support")
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The driver does not support PTP on these older chips and it is assuming
that firmware on these older chips will not return the
PORT_MAC_PTP_QCFG_RESP_FLAGS_HWRM_ACCESS flag in __bnxt_hwrm_ptp_qcfg(),
causing the function to abort quietly.
But newer firmware now sets this flag and so __bnxt_hwrm_ptp_qcfg()
will proceed further. Eventually it will fail in bnxt_ptp_init() ->
bnxt_map_ptp_regs() because there is no code to support the older chips.
The driver will then complain:
"PTP initialization failed.\n"
Fix it so that we abort quietly earlier without going through the
unnecessary steps and alarming the user with the warning log.
Fixes: ae5c42f0b92c ("bnxt_en: Get PTP hardware capability from firmware")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The flower_stats_timer can schedule flower_stats_work and
flower_stats_work can also arm the flower_stats_timer. The
process is shown below:
----------- timer schedules work ------------
ch_flower_stats_cb() //timer handler
schedule_work(&adap->flower_stats_work);
----------- work arms timer ------------
ch_flower_stats_handler() //workqueue callback function
mod_timer(&adap->flower_stats_timer, ...);
When the cxgb4 device is detaching, the timer and workqueue
could still be rearmed. The process is shown below:
(cleanup routine) | (timer and workqueue routine)
remove_one() |
free_some_resources() | ch_flower_stats_cb() //timer
cxgb4_cleanup_tc_flower() | schedule_work()
del_timer_sync() |
| ch_flower_stats_handler() //workqueue
| mod_timer()
cancel_work_sync() |
kfree(adapter) //FREE | ch_flower_stats_cb() //timer
| adap->flower_stats_work //USE
This patch changes del_timer_sync() to timer_shutdown_sync(),
which could prevent rearming of the timer from the workqueue.
Fixes: e0f911c81e93 ("cxgb4: fetch stats for offloaded tc flower flows")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20230415081227.7463-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to not transmit (preemptible) frames which will be received by
the link partner as corrupted (because it doesn't support FP), the
hardware requires the driver to program the QSYS_PREEMPTION_CFG_P_QUEUES
register only after the MAC Merge layer becomes active (verification
succeeds, or was disabled).
There are some cases when FP is known (through experimentation) to be
broken. Give priority to FP over cut-through switching, and disable FP
for known broken link modes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mqprio queue configuration can appear either through
TC_SETUP_QDISC_MQPRIO or through TC_SETUP_QDISC_TAPRIO. Make sure both
are treated in the same way.
Code does nothing new for now (except for rejecting multiple TXQs per
TC, which is a useless concept with DSA switches).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This doesn't apply anything to hardware and in general doesn't do
anything that the software variant doesn't do, except for checking that
there isn't more than 1 TXQ per TC (TXQs for a DSA switch are a dubious
concept anyway). The reason we add this is to be able to parse one more
field added to struct tc_mqprio_qopt_offload, namely preemptible_tcs.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ocelot_mm_update_port_status() updates mm->verify_status, but when the
verification state of a port changes, an IRQ isn't emitted, but rather,
only when the verification state reaches one of the final states (like
DISABLED, FAILED, SUCCEEDED) - things that would affect mm->tx_active,
which is what the IRQ *is* actually emitted for.
That is to say, user space may miss reports of an intermediary MAC Merge
verification state (like from INITIAL to VERIFYING), unless there was an
IRQ notifying the driver of the change in mm->tx_active as well.
This is not a huge deal, but for reliable reporting to user space, let's
call ocelot_mm_update_port_status() synchronously from
ocelot_port_get_mm(), which makes user space see the current MM status.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MAC Merge IRQ of all ports is shared with the PTP TX timestamp IRQ
of all ports, which means that currently, when a PTP TX timestamp is
generated, felix_irq_handler() also polls for the MAC Merge layer status
of all ports, looking for changes. This makes the kernel do more work,
and under certain circumstances may make ptp4l require a
tx_timestamp_timeout argument higher than before.
Changes to the MAC Merge layer status are only to be expected under
certain conditions - its TX direction needs to be enabled - so we can
check early if that is the case, and omit register access otherwise.
Make ocelot_mm_update_port_status() skip register access if
mm->tx_enabled is unset, and also call it once more, outside IRQ
context, from ocelot_port_set_mm(), when mm->tx_enabled transitions from
true to false, because an IRQ is also expected in that case.
Also, a port may have its MAC Merge layer enabled but it may not have
generated the interrupt. In that case, there's no point in writing to
DEV_MM_STATUS to acknowledge that IRQ. We can reduce the number of
register writes per port with MM enabled by keeping an "ack" variable
which writes the "write-one-to-clear" bits. Those are 3 in number:
PRMPT_ACTIVE_STICKY, UNEXP_RX_PFRM_STICKY and UNEXP_TX_PFRM_STICKY.
The other fields in DEV_MM_STATUS are read-only and it doesn't matter
what is written to them, so writing zero is just fine.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unfortunately, the workarounds for the hardware bugs make it pointless
to keep fine-grained locking for the MAC Merge state of each port.
Our vsc9959_cut_through_fwd() implementation requires
ocelot->fwd_domain_lock to be held, in order to serialize with changes
to the bridging domains and to port speed changes (which affect which
ports can be cut-through). Simultaneously, the traffic classes which can
be cut-through cannot be preemptible at the same time, and this will
depend on the MAC Merge layer state (which changes from threaded
interrupt context).
Since vsc9959_cut_through_fwd() would have to hold the mm->lock of all
ports for a correct and race-free implementation with respect to
ocelot_mm_irq(), in practice it means that any time a port's mm->lock is
held, it would potentially block holders of ocelot->fwd_domain_lock.
In the interest of simple locking rules, make all MAC Merge layer state
changes (and preemptible traffic class changes) be serialized by the
ocelot->fwd_domain_lock.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the switch emits an IRQ, we don't know what caused it, and we
iterate through all ports to check the MAC Merge status.
Move that iteration inside the ocelot lib; we will change the locking in
a future change and it would be good to encapsulate that lock completely
within the ocelot lib.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add receive hardware timestamp metadata support via kfunc to XDP Zero Copy
receive packets.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add receive hardware timestamp metadata support via kfunc to XDP receive
packets.
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce struct stmmac_xdp_buff as a preparation to support XDP Rx
metadata via kfuncs.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Open mlx5 driver to accept IPsec tunnel mode.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current hardware doesn't support double encapsulation which is
happening when IPsec packet offload tunnel mode is configured
together with eswitch encap option.
Any user attempt to add new SA/policy after he/she sets encap mode, will
generate the following FW syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 1904): CREATE_FLOW_TABLE(0x930) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0xa43321), err(-22)
Make sure that we block encap changes before creating flow steering tables.
This is applicable only for packet offload in tunnel mode, while packet
offload in transport mode and crypto offload, don't have such limitation
as they don't perform encapsulation.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Existing eswitch encap option enables header encapsulation. Unfortunately
currently available hardware isn't able to perform double encapsulation,
which can happen once IPsec packet offload tunnel mode is used together
with encap mode set to BASIC.
So as a solution for misconfiguration, provide an option to block encap
changes, which will be used for IPsec packet offload.
Reviewed-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In IPsec packet offload mode all header manipulations are performed by
hardware, which is responsible to add/remove L2 header with source and
destinations MACs.
CX-7 devices don't support offload of in-kernel routing functionality,
as such HW needs external help to fill other side MAC as it isn't
available for HW.
As a solution, let's listen to neigh ARP updates and reconfigure IPsec
rules on the fly once new MAC data information arrives.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend mlx5 driver with logic to support IPsec TX packet offload
in tunnel mode.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend mlx5 driver with logic to support IPsec RX packet offload
in tunnel mode.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor setup_pkt_reformat() function to accommodate future extension
to support tunnel mode.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create SA flow steering tables both for RX and TX with tunnel reformat
property. This allows to add and delete extra headers needed for tunnel
mode.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Validate tunnel mode support for IPsec packet offload.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add error handling of i40e_setup_misc_vector() in i40e_rebuild().
In case interrupt vectors setup fails do not re-open vsi-s and
do not bring up vf-s, we have no interrupts to serve a traffic
anyway.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix accessing vsi->active_filters without holding the mac_filter_hash_lock.
Move vsi->active_filters = 0 inside critical section and
move clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state) after the critical
section to ensure the new filters from other threads can be added only after
filters cleaning in the critical section is finished.
Fixes: 278e7d0b9d68 ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Take nss calculation into account since this function always wrongly
returns 0.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The vif->bss_conf.mcast_rate should be applied to multicast data frame
only.
Fixes: 182071cdd594 ("mt76: connac: move connac2_mac_write_txwi in mt76_connac module")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
If the chip reset worker is triggered during the remove process, the chip
DMA may not be properly pushed back to the idle state. This can lead to
corruption of the DMA flow due to the chip reset. Therefore, it is
necessary to stop the chip reset before the DMA is finalized.
To avoid resetting the chip after the reset worker is cancelled, use
__mt7921_mcu_drv_pmctrl() instead of mt7921_mcu_drv_pmctrl(). It is safe to
ignore the pm mutex because the pm worker and wake worker have already been
cancelled.
Fixes: 033ae79b3830 ("mt76: mt7921: refactor init.c to be bus independent")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Co-developed-by: Wang Zhao <wang.zhao@mediatek.com>
Signed-off-by: Wang Zhao <wang.zhao@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The hardware team has advised the driver that it is necessary to first put
WFDMA into an idle state before resetting the WFDMA. Otherwise, the WFDMA
may enter an unknown state where it cannot be polled with the right state
successfully. To ensure that the DMA can work properly while a stressful
cold reboot test was being made, we have reordered the programming sequence
in the driver based on the hardware team's guidance.
The patch would modify the WFDMA disabling flow from
"DMA reset -> disabling DMASHDL -> disabling WFDMA -> polling and waiting
until DMA idle" to "disabling WFDMA -> polling and waiting for DMA idle ->
disabling DMASHDL -> DMA reset.
Where he polling and waiting until WFDMA is idle is coordinated with the
operation of disabling WFDMA. Even while WFDMA is being disabled, it can
still handle Tx/Rx requests. The additional polling allows sufficient time
for WFDMA to process the last T/Rx request. When the idle state of WFDMA is
reached, it is a reliable indication that DMASHDL is also idle to ensure it
is safe to disable it and perform the DMA reset.
Fixes: 0a1059d0f060 ("mt76: mt7921: move mt7921_dma_reset in dma.c")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Co-developed-by: Wang Zhao <wang.zhao@mediatek.com>
Signed-off-by: Wang Zhao <wang.zhao@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
