| Age | Commit message (Collapse) | Author |
|---|
|
Return a specific error code - -ENOSPC - to signal the too small cert
data buffer instead of checking exit code and exitinfo2.
While at it, hoist the *fw_err assignment in snp_issue_guest_request()
so that a proper error value is returned to the callers.
[ Tom: check override_err instead of err. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-4-bp@alien8.de
|
|
No need to check it on every ioctl. And yes, this is a common SEV driver
but it does only SNP-specific operations currently. This can be
revisited later, when more use cases appear.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-3-bp@alien8.de
|
|
When tunneling aggregated USB3 (20 Gb/s) the bandwidth values that are
programmed to the ADP_USB3_CS_2 go higher than 4096 and that does not
fit anymore to the 12-bit field. Fix this by scaling the value using
the scale field accordingly.
Fixes: 3b1d8d577ca8 ("thunderbolt: Implement USB3 bandwidth negotiation routines")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Current Intel USB4 host routers have hardware limitation that the USB3
bandwidth cannot go higher than 16376 Mb/s. Work this around by adding a
new quirk that limits the bandwidth for the affected host routers.
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
In order to apply quirks based on certain adapter types move call to
tb_check_quirks() happen after the adapters are initialized. This should
not affect the existing quirks.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
According to USB4 retimer specification, the process of firmware update
sequence requires issuing a SET_INBOUND_SBTX port operation that later
shall be followed by UNSET_INBOUND_SBTX port operation. This last step
is not currently issued by the driver but it is necessary to make sure
the retimers are put back to passthrough mode even during enumeration.
If this step is missing the link may not come up properly after
soft-reboot for example.
For this reason issue UNSET_INBOUND_SBTX after SET_INBOUND_SBTX for
enumeration and also when the NVM upgrade is run.
Reported-by: Christian Schaubschläger <christian.schaubschlaeger@gmx.at>
Link: https://lore.kernel.org/linux-usb/b556f5ed-5ee8-9990-9910-afd60db93310@gmx.at/
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Memory for the usb4->margining needs to be relased for the upstream port
of the router as well, even though the debugfs directory gets released
with the router device removal. Fix this.
Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Users reported oopses on list corruptions when using i915 perf with a
number of concurrently running graphics applications. Root cause analysis
pointed at an issue in barrier processing code -- a race among perf open /
close replacing active barriers with perf requests on kernel context and
concurrent barrier preallocate / acquire operations performed during user
context first pin / last unpin.
When adding a request to a composite tracker, we try to reuse an existing
fence tracker, already allocated and registered with that composite. The
tracker we obtain may already track another fence, may be an idle barrier,
or an active barrier.
If the tracker we get occurs a non-idle barrier then we try to delete that
barrier from a list of barrier tasks it belongs to. However, while doing
that we don't respect return value from a function that performs the
barrier deletion. Should the deletion ever fail, we would end up reusing
the tracker still registered as a barrier task. Since the same structure
field is reused with both fence callback lists and barrier tasks list,
list corruptions would likely occur.
Barriers are now deleted from a barrier tasks list by temporarily removing
the list content, traversing that content with skip over the node to be
deleted, then populating the list back with the modified content. Should
that intentionally racy concurrent deletion attempts be not serialized,
one or more of those may fail because of the list being temporary empty.
Related code that ignores the results of barrier deletion was initially
introduced in v5.4 by commit d8af05ff38ae ("drm/i915: Allow sharing the
idle-barrier from other kernel requests"). However, all users of the
barrier deletion routine were apparently serialized at that time, then the
issue didn't exhibit itself. Results of git bisect with help of a newly
developed igt@gem_barrier_race@remote-request IGT test indicate that list
corruptions might start to appear after commit 311770173fac ("drm/i915/gt:
Schedule request retirement when timeline idles"), introduced in v5.5.
Respect results of barrier deletion attempts -- mark the barrier as idle
only if successfully deleted from the list. Then, before proceeding with
setting our fence as the one currently tracked, make sure that the tracker
we've got is not a non-idle barrier. If that check fails then don't use
that tracker but go back and try to acquire a new, usable one.
v3: use unlikely() to document what outcome we expect (Andi),
- fix bad grammar in commit description.
v2: no code changes,
- blame commit 311770173fac ("drm/i915/gt: Schedule request retirement
when timeline idles"), v5.5, not commit d8af05ff38ae ("drm/i915: Allow
sharing the idle-barrier from other kernel requests"), v5.4,
- reword commit description.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6333
Fixes: 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org # v5.5
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302120820.48740-1-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 506006055769b10d1b2b4e22f636f3b45e0e9fc7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
It seems that commit bc3c5e0809ae ("drm/i915/sseu: Don't try to store EU
mask internally in UAPI format") exposed a potential out-of-bounds
access, reported by UBSAN as following on a laptop with a gen 11 i915
card:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/i915/gt/intel_sseu.c:65:27
index 6 is out of range for type 'u16 [6]'
CPU: 2 PID: 165 Comm: systemd-udevd Not tainted 6.2.0-9-generic #9-Ubuntu
Hardware name: Dell Inc. XPS 13 9300/077Y9N, BIOS 1.11.0 03/22/2022
Call Trace:
<TASK>
show_stack+0x4e/0x61
dump_stack_lvl+0x4a/0x6f
dump_stack+0x10/0x18
ubsan_epilogue+0x9/0x3a
__ubsan_handle_out_of_bounds.cold+0x42/0x47
gen11_compute_sseu_info+0x121/0x130 [i915]
intel_sseu_info_init+0x15d/0x2b0 [i915]
intel_gt_init_mmio+0x23/0x40 [i915]
i915_driver_mmio_probe+0x129/0x400 [i915]
? intel_gt_probe_all+0x91/0x2e0 [i915]
i915_driver_probe+0xe1/0x3f0 [i915]
? drm_privacy_screen_get+0x16d/0x190 [drm]
? acpi_dev_found+0x64/0x80
i915_pci_probe+0xac/0x1b0 [i915]
...
According to the definition of sseu_dev_info, eu_mask->hsw is limited to
a maximum of GEN_MAX_SS_PER_HSW_SLICE (6) sub-slices, but
gen11_sseu_info_init() can potentially set 8 sub-slices, in the
!IS_JSL_EHL(gt->i915) case.
Fix this by reserving up to 8 slots for max_subslices in the eu_mask
struct.
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Fixes: bc3c5e0809ae ("drm/i915/sseu: Don't try to store EU mask internally in UAPI format")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230220171858.131416-1-andrea.righi@canonical.com
(cherry picked from commit 3cba09a6ac86ea1d456909626eb2685596c07822)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add snps phy table values for HDMI pixel clocks 267.30 MHz and
319.89 MHz. Values are based on the Bspec algorithm for
PLL programming for HDMI.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8008
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223043619.3941382-1-ankit.k.nautiyal@intel.com
(cherry picked from commit d46746b8b13cbd377ffc733e465d25800459a31b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently we are using hardcoded 7 for io and fast wake lines.
According to Bspec io and fast wake times are both 42us for
DISPLAY_VER >= 12 and 50us and 32us for older platforms.
Calculate line counts for these and configure them into PSR2_CTL
accordingly
Use 45 us for the fast wake calculation as 42 seems to be too
tight based on testing.
Bspec: 49274, 4289
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 64cf40a125ff ("drm/i915/psr: Program default IO buffer Wake and Fast Wake")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7725
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230221085304.3382297-1-jouni.hogander@intel.com
(cherry picked from commit cb42e8ede5b475c096e473b86c356b1158b4bc3b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
I forgot to call intel_audio_compute_config() on DP MST, which
means ELD doesn't get populated and passed to the audio driver.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/8097
Fixes: 5d986635e296 ("drm/i915/audio: Precompute the ELD")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230220151731.6852-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit 518b761a7b0e2bb2fac2518f041c71b461adf761)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Previous documentation suggested that PL1 power limit is always
enabled. However we now find this not to be the case on some
platforms (such as ATSM). Therefore enable PL1 power limit during hwmon
initialization.
Bspec: 51864
v2: Add Bspec reference (Gwan-gyeong)
v3: Add Fixes tag
Fixes: 99f55efb79114 ("drm/i915/hwmon: Power PL1 limit and TDP setting")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230203155309.1042297-1-ashutosh.dixit@intel.com
(cherry picked from commit 0349c41b05968befaffa5fbb7e73d0ee6004f610)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Backmerging to get latest upstream.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
On s390 PCI functions may be hotplugged individually even when they
belong to a multi-function device. In particular on an SR-IOV device VFs
may be removed and later re-added.
In commit a50297cf8235 ("s390/pci: separate zbus creation from
scanning") it was missed however that struct pci_bus and struct
zpci_bus's resource list retained a reference to the PCI functions MMIO
resources even though those resources are released and freed on
hot-unplug. These stale resources may subsequently be claimed when the
PCI function re-appears resulting in use-after-free.
One idea of fixing this use-after-free in s390 specific code that was
investigated was to simply keep resources around from the moment a PCI
function first appeared until the whole virtual PCI bus created for
a multi-function device disappears. The problem with this however is
that due to the requirement of artificial MMIO addreesses (address
cookies) extra logic is then needed to keep the address cookies
compatible on re-plug. At the same time the MMIO resources semantically
belong to the PCI function so tying their lifecycle to the function
seems more logical.
Instead a simpler approach is to remove the resources of an individually
hot-unplugged PCI function from the PCI bus's resource list while
keeping the resources of other PCI functions on the PCI bus untouched.
This is done by introducing pci_bus_remove_resource() to remove an
individual resource. Similarly the resource also needs to be removed
from the struct zpci_bus's resource list. It turns out however, that
there is really no need to add the MMIO resources to the struct
zpci_bus's resource list at all and instead we can simply use the
zpci_bar_struct's resource pointer directly.
Fixes: a50297cf8235 ("s390/pci: separate zbus creation from scanning")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230306151014.60913-2-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Starting from an used_idx different than 0 is needed in use cases like
virtual machine migration. Not doing so and letting the caller set an
avail idx different than 0 causes destination device to try to use old
buffers that source driver already recover and are not available
anymore.
Since vdpa_sim does not support receive inflight descriptors as a
destination of a migration, let's set both avail_idx and used_idx the
same at vq start. This is how vhost-user works in a
VHOST_SET_VRING_BASE call.
Although the simple fix is to set last_used_idx at vdpasim_set_vq_state,
it would be reset at vdpasim_queue_ready. The last_avail_idx case is
fixed with commit 0e84f918fac8 ("vdpa_sim: not reset state in
vdpasim_queue_ready"). Since the only option is to make it equal to
last_avail_idx, adding the only change needed here.
This was discovered and tested live migrating the vdpa_sim_net device.
Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230302181857.925374-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently vhost_vdpa_cleanup() unmaps the DMA mappings by calling
`iommu_unmap(v->domain, map->start, map->size);`
from vhost_vdpa_general_unmap() when the parent vDPA driver doesn't
provide DMA config operations.
However, the IOMMU domain referred to by `v->domain` is freed in
vhost_vdpa_free_domain() before vhost_vdpa_cleanup() in
vhost_vdpa_release() which results in NULL pointer de-reference.
Accordingly, moving the call to vhost_vdpa_free_domain() in
vhost_vdpa_cleanup() would makes sense. This will also help
detaching the dma device in error handling of vhost_vdpa_alloc_domain().
This issue was observed on terminating QEMU with SIGQUIT.
Fixes: 037d4305569a ("vhost-vdpa: call vhost_vdpa_cleanup during the release")
Signed-off-by: Gautam Dawar <gautam.dawar@amd.com>
Message-Id: <20230301163203.29883-1-gautam.dawar@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
to race condition
In da9150_charger_probe, &charger->otg_work is bound with
da9150_charger_otg_work. da9150_charger_otg_ncb may be
called to start the work.
If we remove the module which will call da9150_charger_remove
to make cleanup, there may be a unfinished work. The possible
sequence is as follows:
Fix it by canceling the work before cleanup in the da9150_charger_remove
CPU0 CPUc1
|da9150_charger_otg_work
da9150_charger_remove |
power_supply_unregister |
device_unregister |
power_supply_dev_release|
kfree(psy) |
|
| power_supply_changed(charger->usb);
| //use
Fixes: c1a281e34dae ("power: Add support for DA9150 Charger")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.
Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.
The following hardware was used to test this issue:
Framework Laptop (Pre-production)
BIOS: INSYDE Corp, Revision: 3.2
TPM Device: NTC, Firmware Revision: 7.2
Dump of the faulty ACPI TPM2 table:
[000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table]
[004h 0004 4] Table Length : 0000004C
[008h 0008 1] Revision : 04
[009h 0009 1] Checksum : 2B
[00Ah 0010 6] Oem ID : "INSYDE"
[010h 0016 8] Oem Table ID : "TGL-ULT"
[018h 0024 4] Oem Revision : 00000002
[01Ch 0028 4] Asl Compiler ID : "ACPI"
[020h 0032 4] Asl Compiler Revision : 00040000
[024h 0036 2] Platform Class : 0000
[026h 0038 2] Reserved : 0000
[028h 0040 8] Control Address : 0000000000000000
[030h 0048 4] Start Method : 06 [Memory Mapped I/O]
[034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
[040h 0064 4] Minimum Log Length : 00010000
[044h 0068 8] Log Address : 000000004053D000
Fixes: 0cf577a03f21 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/hwmon/tmp513.c:610:34: error: ‘tmp51x_of_match’ defined but not used [-Werror=unused-const-variable=]
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312193723.478032-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When probing the ucd90320 access to some of the registers randomly fails.
Sometimes it NACKs a transfer, sometimes it returns just random data and
the PEC check fails.
Experimentation shows that this seems to be triggered by a register access
directly back to back with a previous register write. Experimentation also
shows that inserting a small delay after register writes makes the issue go
away.
Use a similar solution to what the max15301 driver does to solve the same
problem. Create a custom set of bus read and write functions that make sure
that the delay is added.
Fixes: a470f11c5ba2 ("hwmon: (pmbus/ucd9000) Add support for UCD90320 Power Sequencer")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230312160312.2227405-1-lars@metafoo.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
ret is set to 0 which do not indicate an error.
Return -EINVAL instead.
Fixes: a9e9dd9c6de5 ("hwmon: (ina3221) Read channel input source info from DT")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20230310075035.246083-1-marcus.folkesson@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
condition
In xgene_hwmon_probe, &ctx->workq is bound with xgene_hwmon_evt_work.
Then it will be started.
If we remove the driver which will call xgene_hwmon_remove to clean up,
there may be unfinished work.
The possible sequence is as follows:
Fix it by finishing the work before cleanup in xgene_hwmon_remove.
CPU0 CPU1
|xgene_hwmon_evt_work
xgene_hwmon_remove |
kfifo_free(&ctx->async_msg_fifo);|
|
|kfifo_out_spinlocked
|//use &ctx->async_msg_fifo
Fixes: 2ca492e22cb7 ("hwmon: (xgene) Fix crash when alarm occurs before driver probe")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230310084007.1403388-1-zyytlz.wz@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to
execute various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as
now in 6.3-rc1 we have a "real" wifi driver for one that includes
support for many many more devices than this old driver did. So it's
time to remove it as it is no longer needed. The maintainers of this
driver all have acked its removal. Many thanks to them over the years
for working to clean it up and keep it working while the real driver
was being developed.
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: delete driver
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
staging: rtl8723bs: Fix key-store index handling
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
|
|
Even though we are passing 'ret' as stop condition for
read_poll_timeout(), that return code is still being ignored. The reason
is that the poll will stop if the passed condition is true which will
happen if the passed op() returns error. However, read_poll_timeout()
returns 0 if the *complete* condition evaluates to true. Therefore, the
error code returned by op() will be ignored.
To fix this we need to check for both error codes:
* The one returned by read_poll_timeout() which is either 0 or
ETIMEDOUT.
* The one returned by the passed op().
Fixes: a44ef7c46097 ("iio: adc: add max11410 adc driver")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Link: https://lore.kernel.org/r/20230307095303.713251-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
|
|
Switching to BLK_MQ_F_BLOCKING wrongly removed the call to
blk_mq_end_request(). Add it back to have our IOs finished
Fixes: 91cc8fbcc8c7 ("ubi: block: set BLK_MQ_F_BLOCKING")
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The CIO-DAC series of devices only supports DAC values up to 12-bit
rather than 16-bit. Trying to write a 16-bit value results in only the
lower 12 bits affecting the DAC output which is not what the user
expects. Instead, adjust the DAC write value check to reject values
larger than 12-bit so that they fail explicitly as invalid for the user.
Fixes: 3b8df5fd526e ("iio: Add IIO support for the Measurement Computing CIO-DAC family")
Cc: stable@vger.kernel.org
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/20230311002248.8548-1-william.gray@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
XDP is supported only if enough queues are present, so when reconfiguring
the queues set xdp_features accordingly.
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Suggested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Matteo Croce <teknoraver@meta.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Take into account LRO and GRO configuration setting device xdp_features
flag. Consider channel rq_wq_type enabling rx scatter-gatter support in
xdp_features flag and disable NETDEV_XDP_ACT_NDO_XMIT_SG since it is not
supported yet by the driver.
Moreover always enable NETDEV_XDP_ACT_NDO_XMIT as the ndo_xdp_xmit
callback does not require to load a dummy xdp program on the NIC.
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Co-developed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Take into account tx/rx queues reconfiguration setting device
xdp_features flag. Moreover consider NETIF_F_GRO flag in order to enable
ndo_xdp_xmit callback.
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ena nic allows xdp just if enough hw queues are available for XDP.
Take into account queues configuration setting xdp_features.
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
thunderx nic allows xdp just if enough hw queues are available for XDP.
Take into account queues configuration setting xdp_features.
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the driver detects during probe that firmware is in recovery
mode then i40e_init_recovery_mode() is called and the rest of
probe function is skipped including pci_set_drvdata(). Subsequent
i40e_shutdown() called during shutdown/reboot dereferences NULL
pointer as pci_get_drvdata() returns NULL.
To fix call pci_set_drvdata() also during entering to recovery mode.
Reproducer:
1) Lets have i40e NIC with firmware in recovery mode
2) Run reboot
Result:
[ 139.084698] i40e: Intel(R) Ethernet Connection XL710 Network Driver
[ 139.090959] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
[ 139.108438] i40e 0000:02:00.0: Firmware recovery mode detected. Limiting functionality.
[ 139.116439] i40e 0000:02:00.0: Refer to the Intel(R) Ethernet Adapters and Devices User Guide for details on firmware recovery mode.
[ 139.129499] i40e 0000:02:00.0: fw 8.3.64775 api 1.13 nvm 8.30 0x8000b78d 1.3106.0 [8086:1583] [15d9:084a]
[ 139.215932] i40e 0000:02:00.0 enp2s0f0: renamed from eth0
[ 139.223292] i40e 0000:02:00.1: Firmware recovery mode detected. Limiting functionality.
[ 139.231292] i40e 0000:02:00.1: Refer to the Intel(R) Ethernet Adapters and Devices User Guide for details on firmware recovery mode.
[ 139.244406] i40e 0000:02:00.1: fw 8.3.64775 api 1.13 nvm 8.30 0x8000b78d 1.3106.0 [8086:1583] [15d9:084a]
[ 139.329209] i40e 0000:02:00.1 enp2s0f1: renamed from eth0
...
[ 156.311376] BUG: kernel NULL pointer dereference, address: 00000000000006c2
[ 156.318330] #PF: supervisor write access in kernel mode
[ 156.323546] #PF: error_code(0x0002) - not-present page
[ 156.328679] PGD 0 P4D 0
[ 156.331210] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 156.335567] CPU: 26 PID: 15119 Comm: reboot Tainted: G E 6.2.0+ #1
[ 156.343126] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022
[ 156.353369] RIP: 0010:i40e_shutdown+0x15/0x130 [i40e]
[ 156.358430] Code: c1 fc ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 55 48 89 fd 53 48 8b 9f 48 01 00 00 <f0> 80 8b c2 06 00 00 04 f0 80 8b c0 06 00 00 08 48 8d bb 08 08 00
[ 156.377168] RSP: 0018:ffffb223c8447d90 EFLAGS: 00010282
[ 156.382384] RAX: ffffffffc073ee70 RBX: 0000000000000000 RCX: 0000000000000001
[ 156.389510] RDX: 0000000080000001 RSI: 0000000000000246 RDI: ffff95db49988000
[ 156.396634] RBP: ffff95db49988000 R08: ffffffffffffffff R09: ffffffff8bd17d40
[ 156.403759] R10: 0000000000000001 R11: ffffffff8a5e3d28 R12: ffff95db49988000
[ 156.410882] R13: ffffffff89a6fe17 R14: ffff95db49988150 R15: 0000000000000000
[ 156.418007] FS: 00007fe7c0cc3980(0000) GS:ffff95ea8ee80000(0000) knlGS:0000000000000000
[ 156.426083] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 156.431819] CR2: 00000000000006c2 CR3: 00000003092fc005 CR4: 0000000000770ee0
[ 156.438944] PKRU: 55555554
[ 156.441647] Call Trace:
[ 156.444096] <TASK>
[ 156.446199] pci_device_shutdown+0x38/0x60
[ 156.450297] device_shutdown+0x163/0x210
[ 156.454215] kernel_restart+0x12/0x70
[ 156.457872] __do_sys_reboot+0x1ab/0x230
[ 156.461789] ? vfs_writev+0xa6/0x1a0
[ 156.465362] ? __pfx_file_free_rcu+0x10/0x10
[ 156.469635] ? __call_rcu_common.constprop.85+0x109/0x5a0
[ 156.475034] do_syscall_64+0x3e/0x90
[ 156.478611] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 156.483658] RIP: 0033:0x7fe7bff37ab7
Fixes: 4ff0ee1af016 ("i40e: Introduce recovery mode support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230309184509.984639-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
make versioncheck reports the following:
./drivers/net/ethernet/qlogic/qede/qede.h: 10 linux/version.h not needed.
./drivers/net/ethernet/qlogic/qede/qede_ethtool.c: 7 linux/version.h not needed.
So remove linux/version.h from both of these files. Also remove
linux/compiler.h while at it as it is also not being used.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230309225206.2473644-1-usama.anjum@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
EF100 can pop and/or push up to two VLAN tags.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230309115904.56442-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For l3s mode, skb->dev is set to ipvlan interface in ipvlan_nf_input():
skb->dev = addr->master->dev
but, skb->skb_iif remain unchanged, this will cause socket lookup failed
if a target socket is bound to a interface, like the following example:
ip link add ipvlan0 link eth0 type ipvlan mode l3s
ip addr add dev ipvlan0 192.168.124.111/24
ip link set ipvlan0 up
ping -c 1 -I ipvlan0 8.8.8.8
100% packet loss
This is because there is no match sk in __raw_v4_lookup() as sk->sk_bound_dev_if != dif(skb->skb_iif).
Fix this by make skb->skb_iif track skb->dev in ipvlan_nf_input().
Fixes: c675e06a98a4 ("ipvlan: decouple l3s mode dependencies from other modes")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/29865b1f-6db7-c07a-de89-949d3721ea30@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bindings for the am65-cpsw driver use the name "serdes" to refer to
the Serdes PHY. Thus, update the name used for the Serdes PHY within the
am65_cpsw_init_serdes_phy() function from "serdes-phy" to "serdes".
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the TJA1103 user manual, the bit for the reversed role in MII
or RMII modes is bit 4.
Cc: <stable@vger.kernel.org> # 5.15+
Fixes: b050f2f15e04 ("phy: nxp-c45: add driver for tja1103")
Signed-off-by: Radu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com>
Link: https://lore.kernel.org/r/20230309100111.1246214-1-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Flashing firmware via devlink flash was failing on PTP OCP devices
because it is using Quad SPI mode, but the driver was not properly
behaving. With force_irq flag landed it now can be fixed.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20230309105421.2953451-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Twenty fixes all in drivers except the one zone storage revalidation
fix to sd.
The megaraid_sas fixes are more on the level of a driver update
(enabling crash dump and increasing lun number) but I thought you
could let this slide on -rc1 and the next most extensive update is a
load of fixes to mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Fix wrong zone_write_granularity value during revalidate
scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file
scsi: megaraid_sas: Driver version update to 07.725.01.00-rc1
scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilities
scsi: megaraid_sas: Update max supported LD IDs to 240
scsi: mpi3mr: Bad drive in topology results kernel crash
scsi: mpi3mr: NVMe command size greater than 8K fails
scsi: mpi3mr: Return proper values for failures in firmware init path
scsi: mpi3mr: Wait for diagnostic save during controller init
scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabled
scsi: mpi3mr: ioctl timeout when disabling/enabling interrupt
scsi: lpfc: Avoid usage of list iterator variable after loop
scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read()
scsi: ufs: mcq: qcom: Clean the return path of ufs_qcom_mcq_config_resource()
scsi: ufs: mcq: qcom: Fix passing zero to PTR_ERR
scsi: ufs: ufs-qcom: Remove impossible check
scsi: ufs: core: Add soft dependency on governor_simpleondemand
scsi: hisi_sas: Check devm_add_action() return value
scsi: qla2xxx: Add option to disable FC2 Target support
scsi: target: iscsi: Fix an error message in iscsi_check_key()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix a recently introduced deadlock in the int340x thermal control
driver (Srinivas Pandruvada)"
* tag 'thermal-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: processor_thermal: Fix deadlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless-next patches for 6.4
Major changes:
cfg80211
* 6 GHz improvements
* HW timestamping support
* support for randomized auth/deauth TA for PASN privacy
(also for mac80211)
mac80211
* radiotap TLV and EHT support for the iwlwifi sniffer
* HW timestamping support
* per-link debugfs for multi-link
brcmfmac
* support for Apple (M1 Pro/Max) devices
iwlwifi
* support for a few new devices
* EHT sniffer support
rtw88
* better support for some SDIO devices
(e.g. MAC address from efuse)
rtw89
* HW scan support for 8852b
* better support for 6 GHz scanning
* tag 'wireless-next-2023-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (84 commits)
wifi: iwlwifi: mvm: fix EOF bit reporting
wifi: iwlwifi: Do not include radiotap EHT user info if not needed
wifi: iwlwifi: mvm: add EHT RU allocation to radiotap
wifi: iwlwifi: Update logs for yoyo reset sw changes
wifi: iwlwifi: mvm: clean up duplicated defines
wifi: iwlwifi: rs-fw: break out for unsupported bandwidth
wifi: iwlwifi: Add support for B step of BnJ-Fm4
wifi: iwlwifi: mvm: make flush code a bit clearer
wifi: iwlwifi: mvm: avoid UB shift of snif_queue
wifi: iwlwifi: mvm: add primary 80 known for EHT radiotap
wifi: iwlwifi: mvm: parse FW frame metadata for EHT sniffer mode
wifi: iwlwifi: mvm: decode USIG_B1_B7 RU to nl80211 RU width
wifi: iwlwifi: mvm: rename define to generic name
wifi: iwlwifi: mvm: allow Microsoft to use TAS
wifi: iwlwifi: mvm: add all EHT based on data0 info from HW
wifi: iwlwifi: mvm: add EHT radiotap info based on rate_n_flags
wifi: iwlwifi: mvm: add an helper function radiotap TLVs
wifi: radiotap: separate vendor TLV into header/content
wifi: iwlwifi: reduce verbosity of some logging events
wifi: iwlwifi: Adding the code to get RF name for MsP device
...
====================
Link: https://lore.kernel.org/r/20230310120159.36518-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The soft state bits are stored in the A2h memory space, and require
SFF-8472 compliance. This is what our have_a2 flag tells us, so use
this to indicate whether we should attempt to use the soft signals.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The hwmon code wants to know when it is safe to access the A2h data
stored in a separate address. We indicate that this is present when
we have SFF-8472 compliance and the lack of an address-change
sequence.,
The same conditions are also true if we want to access other controls
and status in the A2h address. So let's make a flag to indicate whether
we can access it, instead of repeating the conditions throughout the
code.
For now, only convert the hwmon code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tap driver already supports passing in nonblocking state based
on O_NONBLOCK, add support for checking IOCB_NOWAIT as well. With that
done, we can flag it with FMODE_NOWAIT as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/8f859870-e6e2-09ca-9c0f-a2aa7c984fb2@kernel.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tun already checks for both O_NONBLOCK and IOCB_NOWAIT in its read
and write iter handlers, so it's fully ready for FMODE_NOWAIT. But
for some reason it doesn't set it. Rectify that oversight.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/3f7dc1f0-79ca-d85c-4d16-8c12c5bd492d@kernel.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the queue of xdp xmit is not an independent queue, then when the xdp
xmit used all the desc, the xmit from the __dev_queue_xmit() may encounter
the following error.
net ens4: Unexpected TXQ (0) queue failure: -28
This patch adds a check whether sq is full in xdp xmit.
Fixes: 56434a01b12e ("virtio_net: add XDP_TX support")
Reported-by: Yichun Zhang <yichun@openresty.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Separate the logic of checking whether sq is full. The subsequent patch
will reuse this func.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
