summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-03-27qed: remove unused num_ooo_add_to_peninsula variableTom Rix
clang with W=1 reports drivers/net/ethernet/qlogic/qed/qed_ll2.c:649:6: error: variable 'num_ooo_add_to_peninsula' set but not used [-Werror,-Wunused-but-set-variable] u32 num_ooo_add_to_peninsula = 0, cid; ^ This variable is not used so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230326001733.1343274-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-27net: introduce a config option to tweak MAX_SKB_FRAGSEric Dumazet
Currently, MAX_SKB_FRAGS value is 17. For standard tcp sendmsg() traffic, no big deal because tcp_sendmsg() attempts order-3 allocations, stuffing 32768 bytes per frag. But with zero copy, we use order-0 pages. For BIG TCP to show its full potential, we add a config option to be able to fit up to 45 segments per skb. This is also needed for BIG TCP rx zerocopy, as zerocopy currently does not support skbs with frag list. We have used MAX_SKB_FRAGS=45 value for years at Google before we deployed 4K MTU, with no adverse effect, other than a recent issue in mlx4, fixed in commit 26782aad00cc ("net/mlx4: MLX4_TX_BOUNCE_BUFFER_SIZE depends on MAX_SKB_FRAGS") Back then, goal was to be able to receive full size (64KB) GRO packets without the frag_list overhead. Note that /proc/sys/net/core/max_skb_frags can also be used to limit the number of fragments TCP can use in tx packets. By default we keep the old/legacy value of 17 until we get more coverage for the updated values. Sizes of struct skb_shared_info on 64bit arches MAX_SKB_FRAGS | sizeof(struct skb_shared_info): ============================================== 17 320 21 320+64 = 384 25 320+128 = 448 29 320+192 = 512 33 320+256 = 576 37 320+320 = 640 41 320+384 = 704 45 320+448 = 768 This inflation might cause problems for drivers assuming they could pack both the incoming packet (for MTU=1500) and skb_shared_info in half a page, using build_skb(). v3: fix build error when CONFIG_NET=n v2: fix two build errors assuming MAX_SKB_FRAGS was "unsigned long" Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/r/20230323162842.1935061-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-28nvme-pci: mark Lexar NM760 as IGNORE_DEV_SUBNQNJuraj Pecigos
A system with more than one of these SSDs will only have one usable. The kernel fails to detect more than one nvme device due to duplicate cntlids. before: [ 9.395229] nvme 0000:01:00.0: platform quirk: setting simple suspend [ 9.395262] nvme nvme0: pci function 0000:01:00.0 [ 9.395282] nvme 0000:03:00.0: platform quirk: setting simple suspend [ 9.395305] nvme nvme1: pci function 0000:03:00.0 [ 9.409873] nvme nvme0: Duplicate cntlid 1 with nvme1, subsys nqn.2022-07.com.siliconmotion:nvm-subsystem-sn- , rejecting [ 9.409982] nvme nvme0: Removing after probe failure status: -22 [ 9.427487] nvme nvme1: allocated 64 MiB host memory buffer. [ 9.445088] nvme nvme1: 16/0/0 default/read/poll queues [ 9.449898] nvme nvme1: Ignoring bogus Namespace Identifiers after: [ 1.161890] nvme 0000:01:00.0: platform quirk: setting simple suspend [ 1.162660] nvme nvme0: pci function 0000:01:00.0 [ 1.162684] nvme 0000:03:00.0: platform quirk: setting simple suspend [ 1.162707] nvme nvme1: pci function 0000:03:00.0 [ 1.191354] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.193378] nvme nvme1: allocated 64 MiB host memory buffer. [ 1.211044] nvme nvme1: 16/0/0 default/read/poll queues [ 1.211080] nvme nvme0: 16/0/0 default/read/poll queues [ 1.216145] nvme nvme0: Ignoring bogus Namespace Identifiers [ 1.216261] nvme nvme1: Ignoring bogus Namespace Identifiers Adding the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk to resolves the issue. Signed-off-by: Juraj Pecigos <kernel@juraj.dev> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-03-27loop: LOOP_CONFIGURE: send uevents for partitionsAlyssa Ross
LOOP_CONFIGURE is, as far as I understand it, supposed to be a way to combine LOOP_SET_FD and LOOP_SET_STATUS64 into a single syscall. When using LOOP_SET_FD+LOOP_SET_STATUS64, a single uevent would be sent for each partition found on the loop device after the second ioctl(), but when using LOOP_CONFIGURE, no such uevent was being sent. In the old setup, uevents are disabled for LOOP_SET_FD, but not for LOOP_SET_STATUS64. This makes sense, as it prevents uevents being sent for a partially configured device during LOOP_SET_FD - they're only sent at the end of LOOP_SET_STATUS64. But for LOOP_CONFIGURE, uevents were disabled for the entire operation, so that final notification was never issued. To fix this, reduce the critical section to exclude the loop_reread_partitions() call, which causes the uevents to be issued, to after uevents are re-enabled, matching the behaviour of the LOOP_SET_FD+LOOP_SET_STATUS64 combination. I noticed this because Busybox's losetup program recently changed from using LOOP_SET_FD+LOOP_SET_STATUS64 to LOOP_CONFIGURE, and this broke my setup, for which I want a notification from the kernel any time a new partition becomes available. Signed-off-by: Alyssa Ross <hi@alyssa.is> [hch: reduced the critical section] Signed-off-by: Christoph Hellwig <hch@lst.de> Fixes: 3448914e8cc5 ("loop: Add LOOP_CONFIGURE ioctl") Link: https://lore.kernel.org/r/20230320125430.55367-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-27ACPI: bus: Rework system-level device notification handlingRafael J. Wysocki
For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-27Merge tag 'platform-drivers-x86-v6.3-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Intel tpmi/vsec fixes - think-lmi fixes - two other small fixes / hw-id additions * tag 'platform-drivers-x86-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/surface: aggregator: Add missing fwnode_handle_put() platform/x86: think-lmi: Add possible_values for ThinkStation platform/x86: think-lmi: only display possible_values if available platform/x86: think-lmi: use correct possible_values delimiters platform/x86: think-lmi: add missing type attribute platform/x86 (gigabyte-wmi): Add support for A320M-S2H V2 platform/x86/intel: tpmi: Revise the comment of intel_vsec_add_aux platform/x86/intel: tpmi: Fix double free in tpmi_create_device() platform/x86/intel: vsec: Fix a memory leak in intel_vsec_add_aux
2023-03-27Merge tag 'mtd/fixes-for-6.3-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "Raw NAND controller driver fixes: - meson: - Invalidate cache on polling ECC bit - Initialize struct with zeroes - nandsim: Artificially prevent sequential page reads ECC engine driver fixes: - mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is used Binging fixes: - jedec,spi-nor: Document CPOL/CPHA support" * tag 'mtd/fixes-for-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: meson: invalidate cache on polling ECC bit mtd: rawnand: nandsim: Artificially prevent sequential page reads dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support mtd: nand: mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is used mtd: rawnand: meson: initialize struct with zeroes
2023-03-27perf/amlogic: adjust register offsetsMarc Gonzalez
Commit "perf/amlogic: resolve conflict between canvas & pmu" changed the base address. Fixes: 2016e2113d35 ("perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver") Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230327120932.2158389-4-mgonzalez@freebox.fr Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-27s390/vfio-ap: fix memory leak in vfio_ap device driverTony Krowiak
The device release callback function invoked to release the matrix device uses the dev_get_drvdata(device *dev) function to retrieve the pointer to the vfio_matrix_dev object in order to free its storage. The problem is, this object is not stored as drvdata with the device; since the kfree function will accept a NULL pointer, the memory for the vfio_matrix_dev object is never freed. Since the device being released is contained within the vfio_matrix_dev object, the container_of macro will be used to retrieve its pointer. Fixes: 1fde573413b5 ("s390: vfio-ap: base implementation of VFIO AP device driver") Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Link: https://lore.kernel.org/r/20230320150447.34557-1-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27platform/x86: gigabyte-wmi: add support for B650 AORUS ELITE AXThomas Weißschuh
This has been reported as working. Suggested-by: got3nks <got3nks@users.noreply.github.com> Link: https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/15#issuecomment-1483942966 Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230327-gigabyte-wmi-b650-elite-ax-v1-1-d4d645c21d0b@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-03-27platform/x86/intel/pmc: Alder Lake PCH slp_s0_residency fixRajvi Jingar
For platforms with Alder Lake PCH (Alder Lake S and Raptor Lake S) the slp_s0_residency attribute has been reporting the wrong value. Unlike other platforms, ADL PCH does not have a counter for the time that the SLP_S0 signal was asserted. Instead, firmware uses the aggregate of the Low Power Mode (LPM) substate counters as the S0ix value. Since the LPM counters run at a different frequency, this lead to misreporting of the S0ix time. Add a check for Alder Lake PCH and adjust the frequency accordingly when display slp_s0_residency. Fixes: bbab31101f44 ("platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver") Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230320212029.3154407-1-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-03-27drm/i915/perf: Drop wakeref on GuC RC errorChris Wilson
If we fail to adjust the GuC run-control on opening the perf stream, make sure we unwind the wakeref just taken. v2: Retain old goto label names (Ashutosh) v3: Drop bitfield boolean Fixes: 01e742746785 ("drm/i915/guc: Support OA when Wa_16011777198 is enabled") Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-2-umesh.nerlige.ramappa@intel.com (cherry picked from commit 2810ac6c753d17ee2572ffb57fe2382a786a080a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915/dpt: Treat the DPT BO as a framebufferVille Syrjälä
Currently i915_gem_object_is_framebuffer() doesn't treat the BO containing the framebuffer's DPT as a framebuffer itself. This means eg. that the shrinker can evict the DPT BO while leaving the actual FB BO bound, when the DPT is allocated from regular shmem. That causes an immediate oops during hibernate as we try to rewrite the PTEs inside the already evicted DPT obj. TODO: presumably this might also be the reason for the DPT related display faults under heavy memory pressure, but I'm still not sure how that would happen as the object should be pinned by intel_dpt_pin() while in active use by the display engine... Cc: stable@vger.kernel.org Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Imre Deak <imre.deak@intel.com> Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-2-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> (cherry picked from commit 779cb5ba64ec7df80675a956c9022929514f517a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915/gem: Flush lmem contents after constructionChris Wilson
i915_gem_object_create_lmem_from_data() lacks the flush of the data written to lmem to ensure the object is marked as dirty and the writes flushed to the backing store. Once created, we can immediately release the obj->mm.mapping caching of the vmap. Fixes: 7acbbc7cf485 ("drm/i915/guc: put all guc objects in lmem when available") Cc: Matthew Auld <matthew.auld@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.16+ Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316165918.13074-1-nirmoy.das@intel.com (cherry picked from commit e2ee10474ce766686e7a7496585cdfaf79e3a1bf) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915/tc: Fix the ICL PHY ownership check in TC-cold stateImre Deak
The commit renaming icl_tc_phy_is_in_safe_mode() to icl_tc_phy_take_ownership() didn't flip the function's return value accordingly, fix this up. This didn't cause an actual problem besides state check errors, since the function is only used during HW readout. Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: f53979d68a77 ("drm/i915/display/tc: Rename safe_mode functions ownership") Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-4-imre.deak@intel.com (cherry picked from commit f2c7959dda614d9b7c6a41510492de39d31705ec) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Disable DC states for all commitsVille Syrjälä
Keeping DC states enabled is incompatible with the _noarm()/_arm() split we use for writing pipe/plane registers. When DC5 and PSR are enabled, all pipe/plane registers effectively become self-arming on account of DC5 exit arming the update, and PSR exit latching it. What probably saves us most of the time is that (with PIPE_MISC[21]=0) all pipe register writes themselves trigger PSR exit, and then we don't re-enter PSR until the idle frame count has elapsed. So it may be that the PSR exit happens already before we've updated the state too much. Also the PSR1 panel (at least on this KBL) seems to discard the first frame we trasmit, presumably still scanning out from its internal framebuffer at that point. So only the second frame we transmit is actually visible. But I suppose that could also be panel specific behaviour. I haven't checked out how other PSR panels behave, nor did I bother to check what the eDP spec has to say about this. And since this really is all about DC states, let's switch from the MODESET domain to the DC_OFF domain. Functionally they are 100% identical. We should probably remove the MODESET domain... And for good measure let's toss in an assert to the place where we do the _noarm() register writes to make sure DC states are in fact off. v2: Just use intel_display_power_is_enabled() (Imre) Cc: <stable@vger.kernel.org> #v5.17+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Fixes: f8a005eb8972 ("drm/i915: Optimize icl+ universal plane programming") Fixes: 890b6ec4a522 ("drm/i915: Split skl+ plane update into noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320183532.17727-1-ville.syrjala@linux.intel.com (cherry picked from commit 41b4c7fe72b6105a4b49395eea9aa40cef94288d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Workaround ICL CSC_MODE sticky armingVille Syrjälä
Unlike SKL/GLK the ICL CSC unit suffers from a new issue where CSC_MODE arming is sticky. That is, once armed it remains armed causing the CSC coeff/offset registers to become effectively self-arming. CSC coeff/offset registers writes no longer disarm the CSC, but fortunately register read still do. So we can use that to disarm the CSC unit once the registers for the current frame have been latched. This avoid s the self-arming behaviour from persisting into the next frame's .color_commit_noarm() call. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-5-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 92736f1b452bbb8a66bdb5b1d263ad00e04dd3b8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Add a .color_post_update() hookVille Syrjälä
We're going to need stuff after the color management register latching has happened. Add a corresponding hook. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-4-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 3962ca4e080a525fc9eae87aa6b2286f1fae351d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Move CSC load back into .color_commit_arm() when PSR is enabled on ↵Ville Syrjälä
skl/glk SKL/GLK CSC unit suffers from a nasty issue where a CSC coeff/offset register read or write between DC5 exit and PSR exit will undo the CSC arming performed by DMC, and then during PSR exit the hardware will latch zeroes into the active CSC registers. This causes any plane going through the CSC to output all black. We can sidestep the issue by making sure the PSR exit has already actually happened before we touch the CSC coeff/offset registers. Easiest way to guarantee that is to just move the CSC programming back into the .color_commir_arm() as we force a PSR exit (and crucially wait for it to actually happen) prior to touching the arming registers. When PSR (and thus also DC states) are disabled we don't have anything to worry about, so we can keep using the more optional _noarm() hook for writing the CSC registers. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8283 Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 80a892a4c2428b65366721599fc5fe50eaed35fd) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Split icl_color_commit_noarm() from skl_color_commit_noarm()Ville Syrjälä
We're going to want different behavior for skl/glk vs. icl in .color_commit_noarm(), so split the hook into two. Arguably we already had slightly different behaviour since csc_enable/gamma_enable are never set on icl+, so the old code was perhaps a bit confusing as well. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit f161eb01f50ab31f2084975b43bce54b7b671e17) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915/pmu: Use functions common with sysfs to read actual freqAshutosh Dixit
Expose intel_rps_read_actual_frequency_fw to read the actual freq without taking forcewake for use by PMU. The code is refactored to use a common set of functions across sysfs and PMU. Using common functions with sysfs in PMU solves the issues of missing support for MTL and missing support for older generations (prior to Gen6). It also future proofs the PMU where sometimes code has been updated for sysfs and PMU has been missed. v2: Remove runtime_pm_if_in_use from read_actual_frequency_fw (Tvrtko) v3: (Tvrtko) - Remove goto in __read_cagf - Unexport intel_rps_get_cagf and intel_rps_read_punit_req Fixes: 22009b6dad66 ("drm/i915/mtl: Modify CAGF functions for MTL") Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8280 Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316004800.2539753-1-ashutosh.dixit@intel.com (cherry picked from commit 44df42e66139b5fac8db49ee354be279210f9816) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27net: stmmac: don't reject VLANs when IFF_PROMISC is setVladimir Oltean
The blamed commit has introduced the following tests to dwmac4_add_hw_vlan_rx_fltr(), called from stmmac_vlan_rx_add_vid(): if (hw->promisc) { netdev_err(dev, "Adding VLAN in promisc mode not supported\n"); return -EPERM; } "VLAN promiscuous" mode is keyed in this driver to IFF_PROMISC, and so, vlan_vid_add() and vlan_vid_del() calls cannot take place in IFF_PROMISC mode. I have the following 2 arguments that this restriction is.... hm, how shall I put it nicely... unproductive :) First, take the case of a Linux bridge. If the kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y, then this bridge shall have a VLAN database. The bridge shall try to call vlan_add_vid() on its bridge ports for each VLAN in the VLAN table. It will do this irrespectively of whether that port is *currently* VLAN-aware or not. So it will do this even when the bridge was created with vlan_filtering 0. But the Linux bridge, in VLAN-unaware mode, configures its ports in promiscuous (IFF_PROMISC) mode, so that they accept packets with any MAC DA (a switch must do this in order to forward those packets which are not directly targeted to its MAC address). As a result, the stmmac driver does not work as a bridge port, when the kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y. $ ip link add br0 type bridge && ip link set br0 up $ ip link set eth0 master br0 && ip link set eth0 up [ 2333.943296] br0: port 1(eth0) entered blocking state [ 2333.943381] br0: port 1(eth0) entered disabled state [ 2333.943782] device eth0 entered promiscuous mode [ 2333.944080] 4033c000.ethernet eth0: Adding VLAN in promisc mode not supported [ 2333.976509] 4033c000.ethernet eth0: failed to initialize vlan filtering on this port RTNETLINK answers: Operation not permitted Secondly, take the case of stmmac as DSA master. Some switch tagging protocols are based on 802.1Q VLANs (tag_sja1105.c), and as such, tag_8021q.c uses vlan_vid_add() to work with VLAN-filtering DSA masters. But also, when a DSA port becomes promiscuous (for example when it joins a bridge), the DSA framework also makes the DSA master promiscuous. Moreover, for every VLAN that a DSA switch sends to the CPU, DSA also programs a VLAN filter on the DSA master, because if the the DSA switch uses a tail tag, then the hardware frame parser of the DSA master will see VLAN as VLAN, and might filter them out, for being unknown. Due to the above 2 reasons, my belief is that the stmmac driver does not get to choose to not accept vlan_vid_add() calls while IFF_PROMISC is enabled, because the 2 are completely independent and there are code paths in the network stack which directly lead to this situation occurring, without the user's direct input. In fact, my belief is that "VLAN promiscuous" mode should have never been keyed on IFF_PROMISC in the first place, but rather, on the NETIF_F_HW_VLAN_CTAG_FILTER feature flag which can be toggled by the user through ethtool -k, when present in netdev->hw_features. In the stmmac driver, NETIF_F_HW_VLAN_CTAG_FILTER is only present in "features", making this feature "on [fixed]". I have this belief because I am unaware of any definition of promiscuity which implies having an effect on anything other than MAC DA (therefore not VLAN). However, I seem to be rather alone in having this opinion, looking back at the disagreements from this discussion: https://lore.kernel.org/netdev/20201110153958.ci5ekor3o2ekg3ky@ipetronik.com/ In any case, to remove the vlan_vid_add() dependency on !IFF_PROMISC, one would need to remove the check and see what fails. I guess the test was there because of the way in which dwmac4_vlan_promisc_enable() is implemented. For context, the dwmac4 supports Perfect Filtering for a limited number of VLANs - dwmac4_get_num_vlan(), priv->hw->num_vlan, with a fallback on Hash Filtering - priv->dma_cap.vlhash - see stmmac_vlan_update(), also visible in cat /sys/kernel/debug/stmmaceth/eth0/dma_cap | grep 'VLAN Hash Filtering'. The perfect filtering is based on MAC_VLAN_Tag_Filter/MAC_VLAN_Tag_Data registers, accessed in the driver through dwmac4_write_vlan_filter(). The hash filtering is based on the MAC_VLAN_Hash_Table register, named GMAC_VLAN_HASH_TABLE in the driver and accessed by dwmac4_update_vlan_hash(). The control bit for enabling hash filtering is GMAC_VLAN_VTHM (MAC_VLAN_Tag_Ctrl bit VTHM: VLAN Tag Hash Table Match Enable). Now, the description of dwmac4_vlan_promisc_enable() is that it iterates through the driver's cache of perfect filter entries (hw->vlan_filter[i], added by dwmac4_add_hw_vlan_rx_fltr()), and evicts them from hardware by unsetting their GMAC_VLAN_TAG_DATA_VEN (MAC_VLAN_Tag_Data bit VEN - VLAN Tag Enable) bit. Then it unsets the GMAC_VLAN_VTHM bit, which disables hash matching. This leaves the MAC, according to table "VLAN Match Status" from the documentation, to always enter these data paths: VID |VLAN Perfect Filter |VTHM Bit |VLAN Hash Filter |Final VLAN Match |Match Result | |Match Result |Status -------|--------------------|---------|-----------------|---------------- VID!=0 |Fail |0 |don't care |Pass So, dwmac4_vlan_promisc_enable() does its job, but by unsetting GMAC_VLAN_VTHM, it conflicts with the other code path which controls this bit: dwmac4_update_vlan_hash(), called through stmmac_update_vlan_hash() from stmmac_vlan_rx_add_vid() and from stmmac_vlan_rx_kill_vid(). This is, I guess, why dwmac4_add_hw_vlan_rx_fltr() is not allowed to run after dwmac4_vlan_promisc_enable() has unset GMAC_VLAN_VTHM: because if it did, then dwmac4_update_vlan_hash() would set GMAC_VLAN_VTHM again, breaking the "VLAN promiscuity". It turns out that dwmac4_vlan_promisc_enable() is way too complicated for what needs to be done. The MAC_Packet_Filter register also has the VTFE bit (VLAN Tag Filter Enable), which simply controls whether VLAN tagged packets which don't match the filtering tables (either perfect or hash) are dropped or not. At the moment, this driver unconditionally sets GMAC_PACKET_FILTER_VTFE if NETIF_F_HW_VLAN_CTAG_FILTER was detected through the priv->dma_cap.vlhash capability bits of the device, in stmmac_dvr_probe(). I would suggest deleting the unnecessarily complex logic from dwmac4_vlan_promisc_enable(), and simply unsetting GMAC_PACKET_FILTER_VTFE when becoming IFF_PROMISC, which has the same effect of allowing packets with any VLAN tags, but has the additional benefit of being able to run concurrently with stmmac_vlan_rx_add_vid() and stmmac_vlan_rx_kill_vid(). As much as I believe that the VTFE bit should have been exclusively controlled by NETIF_F_HW_VLAN_CTAG_FILTER through ethtool, and not by IFF_PROMISC, changing that is not a punctual fix to the problem, and it would probably break the VFFQ feature added by the later commit e0f9956a3862 ("net: stmmac: Add option for VLAN filter fail queue enable"). From the commit description, VFFQ needs IFF_PROMISC=on and VTFE=off in order to work (and this change respects that). But if VTFE was changed to be controlled through ethtool -k, then a user-visible change would have been introduced in Intel's scripts (a need to run "ethtool -k eth0 rx-vlan-filter off" which did not exist before). The patch was tested with this set of commands: ip link set eth0 up ip link add link eth0 name eth0.100 type vlan id 100 ip addr add 192.168.100.2/24 dev eth0.100 && ip link set eth0.100 up ip link set eth0 promisc on ip link add link eth0 name eth0.101 type vlan id 101 ip addr add 192.168.101.2/24 dev eth0.101 && ip link set eth0.101 up ip link set eth0 promisc off ping -c 5 192.168.100.1 ping -c 5 192.168.101.1 ip link set eth0 promisc on ping -c 5 192.168.100.1 ping -c 5 192.168.101.1 ip link del eth0.100 ip link del eth0.101 # Wait for VLAN-tagged pings from the other end... # Check with "tcpdump -i eth0 -e -n -p" and we should see them ip link set eth0 promisc off # Wait for VLAN-tagged pings from the other end... # Check with "tcpdump -i eth0 -e -n -p" and we shouldn't see them # anymore, but remove the "-p" argument from tcpdump and they're there. Fixes: c89f44ff10fd ("net: stmmac: Add support for VLAN promiscuous mode") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: phy: bcm7xxx: use devm_clk_get_optional_enabled to simplify the codeHeiner Kallweit
Use devm_clk_get_optional_enabled to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Consolidate common probe tasksSean Anderson
Most of the second half of the PCI/SBUS probe functions are the same. Consolidate them into a common function. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Inline error returnsSean Anderson
The err_out label used to have cleanup. Now that it just returns, inline it everywhere. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Clean up mac address initSean Anderson
Clean up some oddities suggested during review. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Consolidate mac address initializationSean Anderson
The mac address initialization is braodly the same between PCI and SBUS, and one was clearly copied from the other. Consolidate them. We still have to have some ifdefs because pci_(un)map_rom is only implemented for PCI, and idprom is only implemented for SPARC. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Switch SBUS to devresSean Anderson
The PCI half of this driver was converted in commit 914d9b2711dd ("sunhme: switch to devres"). Do the same for the SBUS half. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Alphabetize includesSean Anderson
Alphabetize includes to make it clearer where to add new ones. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Unify IRQ requestingSean Anderson
Instead of registering one interrupt handler for all four SBUS Quattro HMEs, let each HME register its own handler. To make this work, we don't handle the IRQ if none of the status bits are set. This reduces the complexity of the driver, and makes it easier to ensure things happen before/after enabling IRQs. I'm not really sure why we request IRQs in two different places (and leave them running after removing the driver!). A lot of things in this driver seem to just be crusty, and not necessarily intentional. I'm assuming that's the case here as well. This really needs to be tested by someone with an SBUS Quattro card. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Remove residual polling codeSean Anderson
The sunhme driver never used the hardware MII polling feature. Even the if-def'd out happy_meal_poll_start was removed by 2002 [1]. Remove the various places in the driver which needlessly guard against MII interrupts which will never be enabled. [1] https://lwn.net/2002/0411/a/2.5.8-pre3.php3 Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Just restart autonegotiation if we can't bring the link upSean Anderson
If we've tried regular autonegotiation and forcing the link mode, just restart autonegotiation instead of reinitializing the whole NIC. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sunhme: Fix uninitialized return codeSean Anderson
Fix an uninitialized return code if we never found a qfe slot. It would be a bug if we ever got into this situation, but it's good to return something tracable. Fixes: acb3f35f920b ("sunhme: forward the error code from pci_enable_device()") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: add heartbeat monitorVeerasenareddy Burru
Monitor periodic heartbeat messages from device firmware. Presence of heartbeat indicates the device is active and running. If the heartbeat is missed for configured interval indicates firmware has crashed and device is unusable; in this case, PF driver stops and uninitialize the device. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: function id in link info and stats mailbox commandsVeerasenareddy Burru
Update control mailbox API to include function id in get stats and link info. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: support asynchronous notificationsVeerasenareddy Burru
Add asynchronous notification support to the control mailbox. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: include function id in mailbox commandsVeerasenareddy Burru
Extend control command structure to include vfid and update APIs to accept VF ID. Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: add separate mailbox command and response queuesVeerasenareddy Burru
Enhance control mailbox protocol to support following - separate command and response queues * command queue to send control commands to firmware. * response queue to receive responses and notifications from firmware. - variable size messages using scatter/gather Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: control mailbox for multiple PFsVeerasenareddy Burru
Add control mailbox support for multiple PFs. Update control mbox base address calculation based on PF function link. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: poll for control messagesVeerasenareddy Burru
Poll for control messages until interrupts are enabled. All the interrupts are enabled in ndo_open(). Add ability to listen for notifications from firmware before ndo_open(). Once interrupts are enabled, this polling is disabled and all the messages are processed by bottom half of interrupt handler. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27octeon_ep: defer probe if firmware not readyVeerasenareddy Burru
Defer probe if firmware is not ready for device usage. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: Satananda Burla <sburla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: dsa: b53: mmap: add phy opsÁlvaro Fernández Rojas
Implement phy_read16() and phy_write16() ops for B53 MMAP to avoid accessing B53_PORT_MII_PAGE registers which hangs the device. This access should be done through the MDIO Mux bus controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: dsa: b53: mdio: add support for BCM53134Paul Geurts
Add support for the BCM53134 Ethernet switch in the existing b53 dsa driver. BCM53134 is very similar to the BCM58XX series. Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: phy: micrel: correct KSZ9131RNX EEE capabilities and advertisementOleksij Rempel
The KSZ9131RNX incorrectly shows EEE capabilities in its registers. Although the "EEE control and capability 1" (Register 3.20) is set to 0, indicating no EEE support, the "EEE advertisement 1" (Register 7.60) is set to 0x6, advertising EEE support for 1000BaseT/Full and 100BaseT/Full. This inconsistency causes PHYlib to assume there is no EEE support, preventing control over EEE advertisement, which is enabled by default. This patch resolves the issue by utilizing the ksz9477_get_features() function to correctly set the EEE capabilities for the KSZ9131RNX. This adjustment allows proper control over EEE advertisement and ensures accurate representation of the device's capabilities. Fixes: 8b68710a3121 ("net: phy: start using genphy_c45_ethtool_get/set_eee()") Reported-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: phy: constify fwnode_get_phy_node() fwnode argumentRussell King (Oracle)
fwnode_get_phy_node() does not motify the fwnode structure, so make the argument const, Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sfp: constify sfp-bus internal fwnode usesRussell King (Oracle)
Constify sfp-bus internal fwnode uses, since we do not modify the fwnode structures. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sfp: make sfp_bus_find_fwnode() take a const fwnodeRussell King (Oracle)
sfp_bus_find_fwnode() does not write to the fwnode, so let's make it const. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net/net_failover: fix txq exceeding warningFaicker Mo
The failover txq is inited as 16 queues. when a packet is transmitted from the failover device firstly, the failover device will select the queue which is returned from the primary device if the primary device is UP and running. If the primary device txq is bigger than the default 16, it can lead to the following warning: eth0 selects TX queue 18, but real number of TX queues is 16 The warning backtrace is: [ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1 [ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014 [ 32.147730] Call Trace: [ 32.147971] <TASK> [ 32.148183] dump_stack_lvl+0x48/0x70 [ 32.148514] dump_stack+0x10/0x20 [ 32.148820] netdev_core_pick_tx+0xb1/0xe0 [ 32.149180] __dev_queue_xmit+0x529/0xcf0 [ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0 [ 32.149967] ip_finish_output2+0x278/0x560 [ 32.150327] __ip_finish_output+0x1fe/0x2f0 [ 32.150690] ip_finish_output+0x2a/0xd0 [ 32.151032] ip_output+0x7a/0x110 [ 32.151337] ? __pfx_ip_finish_output+0x10/0x10 [ 32.151733] ip_local_out+0x5e/0x70 [ 32.152054] ip_send_skb+0x19/0x50 [ 32.152366] udp_send_skb.isra.0+0x163/0x3a0 [ 32.152736] udp_sendmsg+0xba8/0xec0 [ 32.153060] ? __folio_memcg_unlock+0x25/0x60 [ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 32.153854] ? sock_has_perm+0x85/0xa0 [ 32.154190] inet_sendmsg+0x6d/0x80 [ 32.154508] ? inet_sendmsg+0x6d/0x80 [ 32.154838] sock_sendmsg+0x62/0x70 [ 32.155152] ____sys_sendmsg+0x134/0x290 [ 32.155499] ___sys_sendmsg+0x81/0xc0 [ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0 [ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0 [ 32.156649] ? get_random_u16+0x69/0xf0 [ 32.156989] ? __fget_light+0xcf/0x110 [ 32.157326] __sys_sendmmsg+0xc4/0x210 [ 32.157657] ? __sys_connect+0xb7/0xe0 [ 32.157995] ? __audit_syscall_entry+0xce/0x140 [ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0 [ 32.158820] __x64_sys_sendmmsg+0x24/0x30 [ 32.159171] do_syscall_64+0x38/0x90 [ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fix that by reducing txq number as the non-existent primary-dev does. Fixes: cfc80d9a1163 ("net: Introduce net_failover driver") Signed-off-by: Faicker Mo <faicker.mo@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27regulator: Handle deferred clkChristophe JAILLET
devm_clk_get() can return -EPROBE_DEFER. So it is better to return the error code from devm_clk_get(), instead of a hard coded -ENOENT. This gives more opportunities to successfully probe the driver. Fixes: 8959e5324485 ("regulator: fixed: add possibility to enable by clock") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/18459fae3d017a66313699c7c8456b28158b2dd0.1679819354.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-26Merge tag 'usb-6.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt driver fixes from Greg KH: "Here are a small set of USB and Thunderbolt driver fixes for reported problems and a documentation update, for 6.3-rc4. Included in here are: - documentation update for uvc gadget driver - small thunderbolt driver fixes - cdns3 driver fixes - dwc3 driver fixes - dwc2 driver fixes - chipidea driver fixes - typec driver fixes - onboard_usb_hub device id updates - quirk updates All of these have been in linux-next with no reported problems" * tag 'usb-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (30 commits) usb: dwc2: fix a race, don't power off/on phy for dual-role mode usb: dwc2: fix a devres leak in hw_enable upon suspend resume usb: chipidea: core: fix possible concurrent when switch role usb: chipdea: core: fix return -EINVAL if request role is the same with current role thunderbolt: Rename shadowed variables bit to interrupt_bit and auto_clear_bit thunderbolt: Disable interrupt auto clear for rings thunderbolt: Use const qualifier for `ring_interrupt_index` usb: gadget: Use correct endianness of the wLength field for WebUSB uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2 usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driver usb: cdns3: Fix issue with using incorrect PCI device function usb: cdnsp: Fixes issue with redundant Status Stage MAINTAINERS: make me a reviewer of USB/IP thunderbolt: Use scale field when allocating USB3 bandwidth thunderbolt: Limit USB3 bandwidth of certain Intel USB4 host routers thunderbolt: Call tb_check_quirks() after initializing adapters thunderbolt: Add missing UNSET_INBOUND_SBTX for retimer access thunderbolt: Fix memory leak in margining usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host" docs: usb: Add documentation for the UVC Gadget ...
generated by cgit (git 2.34.1) at 2025-09-18 19:56:21 +0000