| Age | Commit message (Collapse) | Author |
|---|
|
The down condition should be the negation of the wake condition,
IOW when I moved it from:
if (cond && wake())
to
if (__netif_txq_completed_wake(cond))
Cond should have been negated. Flip it now.
This bug leads to occasional crashes with netconsole.
It may also lead to queue never waking up in case BQL is not enabled.
Reported-by: David Wei <davidhwei@meta.com>
Fixes: 08a096780d92 ("bnxt: use new queue try_stop/try_wake macros")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230607010826.960226-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
[Description]
Reduce expected SDP bandwidth due to poor QoS and
arbitration issues on high bandwidth configs
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The link object of mgr->reserved_pages is the blocks
variable in struct amdgpu_vram_reservation, not the
link variable in struct drm_buddy_block.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
According to Alex, most APUs from that time seem to have the same issue
(vbios says 48Mhz, actual is 100Mhz). I only have a CHIP_STONEY so I
limit the fixup to CHIP_STONEY
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit f03eb1d26c2739b75580f58bbab4ab2d5d3eba46.
This results in inconsistent timing reported via asynchronous
GPU queries.
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
to revision id"
This reverts commit 9d2d1827af295fd6971786672c41c4dba3657154.
This results in inconsistent timing reported via asynchronous
GPU queries.
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit fbc24293ca16b3b9ef891fe32ccd04735a6f8dc1.
This results in inconsistent timing reported via asynchronous
GPU queries.
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When going from ODM 2:1 single display case to max displays, second
odm pipe needs to be repurposed for one of the new single displays.
However, acquire_first_split_pipe() only handles MPC case and not
ODM case
[How]
Add ODM conditions in acquire_first_split_pipe()
Add commit_minimal_transition_state() in commit_streams() to handle
odm 2:1 exit first, and then process new streams
Handle ODM condition in commit_minimal_transition_state()
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
during suspend path
Users have reported that s2idle wasn't working on OEM Phoenix systems,
but it was root caused to be because `CONFIG_AMD_PMC` wasn't set in
the distribution kernel config.
To make this more apparent, raise the messaging to err instead of warn.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217497
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
sienna_cichlid SKUs
Disable the pcie lane switching for some sienna_cichlid SKUs since it
might not work well on some platforms.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Use the right data structure for allocation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Use the function of amdgpu_bo_vm_destroy to handle the resource release
of shadow bo. During the amdgpu_mes_self_test, shadow bo released, but
vmbo->shadow_list was not, which caused a null pointer reference error
in amdgpu_device_recover_vram when GPU reset.
Fixes: 6c032c37ac3e ("drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
commit cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support") showed
improvements to power consumption over suspend when s0ix wasn't enabled in
BIOS and the system didn't support S3.
This patch however was misguided because the reason the system didn't
support S3 was because SMT was disabled in OEM BIOS setup.
This prevented the BIOS from allowing S3.
Also allowing GPUs to use the s2idle path actually causes problems if
they're invoked on systems that may not support s2idle in the platform
firmware. `systemd` has a tendency to try to use `s2idle` if `deep` fails
for any reason, which could lead to unexpected flows.
The original commit also fixed a problem during resume from suspend to idle
without hardware support, but this is no longer necessary with commit
ca4751866397 ("drm/amd: Don't allow s0ix on APUs older than Raven")
Revert commit cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support")
to make it match the expected behavior again.
Cc: Rafael Ávila de Espíndola <rafael@espindo.la>
Link: https://github.com/torvalds/linux/blob/v6.1/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c#L1060
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2599
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for unbalanced open count for inhibited input devices
- fixups in Elantech PS/2 and Cyppress TTSP v5 drivers
- a quirk to soc_button_array driver to make it work with Lenovo
Yoga Book X90F / X90L
- a removal of erroneous entry from xpad driver
* tag 'input-for-v6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - delete a Razer DeathAdder mouse VID/PID entry
Input: psmouse - fix OOB access in Elantech protocol
Input: soc_button_array - add invalid acpi_index DMI quirk handling
Input: fix open count when closing inhibited device
Input: cyttsp5 - fix array length
|
|
Use kzalloc() to allocate new zeroed out msg node instead of
memsetting a node allocated with kmalloc().
Signed-off-by: Prathu Baronia <prathubaronia2011@gmail.com>
Message-Id: <20230522085019.42914-1-prathubaronia2011@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
The PM8550 uses only NLDOs 515 and the LDO 6 through 8 are low voltage
type, so fix accordingly.
Fixes: e6e3776d682d ("regulator: qcom-rpmh: Add support for PM8550 regulators")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230605115607.921308-1-abel.vesa@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The user-space policy of the gpio-sim is that configuration for lines
with offsets outside the bounds of the corresponding bank is ignored,
but gpio-sim is still using that configuration when constructing the
sim. In the case of named lines this results in temporarily allocating
space for names that are not used, and for hogs results in errors being
logged when the gpio-sim attempts to register the out of range hog with
gpiolib:
gpiochip_machine_hog: unable to get GPIO desc: -22
Add checks to filter out any line configuration outside the bounds
of the bank when constructing the sim.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
AMDTEE add return origin to load TA command
* tag 'amdtee-fix-for-v6.5' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: amdtee: Add return_origin to 'struct tee_cmd_load_ta'
Link: https://lore.kernel.org/r/20230606075843.GA2792442@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If pm runtime resume fails the .remove callback used to exit early. This
resulted in an error message by the driver core but the device gets
removed anyhow. This lets the registered i2c adapter stay around with an
unbound parent device.
So only skip clk disabling if resume failed, but do delete the adapter.
Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The current ice driver's GNSS write implementation buffers writes and
works through them asynchronously in a kthread. That's bad because:
- The GNSS write_raw operation is supposed to be synchronous[1][2].
- There is no upper bound on the number of pending writes.
Userspace can submit writes much faster than the driver can process,
consuming unlimited amounts of kernel memory.
A patch that's currently on review[3] ("[v3,net] ice: Write all GNSS
buffers instead of first one") would add one more problem:
- The possibility of waiting for a very long time to flush the write
work when doing rmmod, softlockups.
To fix these issues, simplify the implementation: Drop the buffering,
the write_work, and make the writes synchronous.
I tested this with gpsd and ubxtool.
[1] https://events19.linuxfoundation.org/wp-content/uploads/2017/12/The-GNSS-Subsystem-Johan-Hovold-Hovold-Consulting-AB.pdf
"User interface" slide.
[2] A comment in drivers/gnss/core.c:gnss_write():
/* Ignoring O_NONBLOCK, write_raw() is synchronous. */
[3] https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20230217120541.16745-1-karol.kolacinski@intel.com/
Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add some missing error propagation in live_parallel_switch.
To avoid needlessly burdening the various backport processes, note I am
not marking it as a fix against any patches and not copying stable since
it is debug/selftests only code.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Fixes: 50d16d44cce4 ("drm/i915/selftests: Exercise context switching in parallel")
Fixes: 6407cf533217 ("drm/i915/selftests: Stop using kthread_stop()")
Link: https://patchwork.freedesktop.org/patch/msgid/20230605131135.396854-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 412fa1f097f48c8c1321806dd25e46618e0da147)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fixes to debugfs registration
- Fix use-after-free in hci_remove_ltk/hci_remove_irk
- Fixes to ISO channel support
- Fix missing checks for invalid L2CAP DCID
- Fix l2cap_disconnect_req deadlock
- Add lock to protect HCI_UNREGISTER
* tag 'for-net-2023-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Add missing checks for invalid DCID
Bluetooth: ISO: use correct CIS order in Set CIG Parameters event
Bluetooth: ISO: don't try to remove CIG if there are bound CIS left
Bluetooth: Fix l2cap_disconnect_req deadlock
Bluetooth: hci_qca: fix debugfs registration
Bluetooth: fix debugfs registration
Bluetooth: hci_sync: add lock to protect HCI_UNREGISTER
Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irk
Bluetooth: ISO: Fix CIG auto-allocation to select configurable CIG
Bluetooth: ISO: consider right CIS when removing CIG at cleanup
====================
Link: https://lore.kernel.org/r/20230606003454.2392552-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.4
Both rtw88 and rtw89 have a 802.11 powersave fix for a regression
introduced in v6.0. mt76 fixes a race and a null pointer dereference.
iwlwifi fixes an issue where not enough memory was allocated for a
firmware event. And finally the stack has several smaller fixes all
over.
* tag 'wireless-2023-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: fix locking in regulatory disconnect
wifi: cfg80211: fix locking in sched scan stop work
wifi: iwlwifi: mvm: Fix -Warray-bounds bug in iwl_mvm_wait_d3_notif()
wifi: mac80211: fix switch count in EMA beacons
wifi: mac80211: don't translate beacon/presp addrs
wifi: mac80211: mlme: fix non-inheritence element
wifi: cfg80211: reject bad AP MLD address
wifi: mac80211: use correct iftype HE cap
wifi: mt76: mt7996: fix possible NULL pointer dereference in mt7996_mac_write_txwi()
wifi: rtw89: remove redundant check of entering LPS
wifi: rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS
wifi: rtw88: correct PS calculation for SUPPORTS_DYNAMIC_PS
wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_poll
====================
Link: https://lore.kernel.org/r/20230606150817.EC133C433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 699b045a8e43 ("net: virtio_net: notifications coalescing
support") added coalescing command support for virtio_net. However,
the coalesce commands are using buffers on the stack, which is causing
the device to see DMA errors. There should also be a complaint from
check_for_stack() in debug_dma_map_xyz(). Fix this by adding and using
coalesce params from the control_buf struct, which aligns with other
commands.
Cc: stable@vger.kernel.org
Fixes: 699b045a8e43 ("net: virtio_net: notifications coalescing support")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20230605195925.51625-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 523847df1b37 ("pds_core: add devcmd device interfaces") included
initial support for FW recovery detection. Unfortunately, the ordering
in pdsc_is_fw_good() was incorrect, which was causing FW recovery to be
undetected by the driver. Fix this by making sure to update the cached
fw_status by calling pdsc_is_fw_running() before setting the local FW
gen.
Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230605195116.49653-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If it is async, runqueue_node is freed in g2d_runqueue_worker on another
worker thread. So in extreme cases, if g2d_runqueue_worker runs first, and
then executes the following if statement, there will be use-after-free.
Signed-off-by: Min Li <lm0963hack@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Fix a wrong error return by dropping an error return.
When vidi driver is remvoed, if ctx->raw_edid isn't same as fake_edid_info
then only what we have to is to free ctx->raw_edid so that driver removing
can work correctly - it's not an error case.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The drm sched entity must be flushed before finishing, to account for
jobs potentially still in flight at that time.
Lima did not do this flush until now, so switch the destroy call to the
drm_sched_entity_destroy() wrapper which will take care of that.
This fixes a regression on lima which started since the rework in
commit 2fdb8a8f07c2 ("drm/scheduler: rework entity flush, kill and fini")
where some specific types of applications may hang indefinitely.
Fixes: 2fdb8a8f07c2 ("drm/scheduler: rework entity flush, kill and fini")
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606143247.433018-1-nunes.erico@gmail.com
|
|
The DSPI controller has configurable timing for
(a) tCSC: the interval between the assertion of the chip select and the
first clock edge
(b) tASC: the interval between the last clock edge and the deassertion
of the chip select
What is a bit surprising, but is documented in the figure "Example of
continuous transfer (CPHA=1, CONT=1)" in the datasheet, is that when the
chip select stays asserted between multiple TX FIFO writes, the tCSC and
tASC times still apply. With CONT=1, chip select remains asserted, but
SCK takes a break and goes to the idle state for tASC + tCSC ns.
In other words, the default values (of 0 and 0 ns) result in SCK
glitches where the SCK transition to the idle state, as well as the SCK
transition from the idle state, will have no delay in between, and it
may appear that a SCK cycle has simply gone missing. The resulting
timing violation might cause data corruption in many peripherals, as
their chip select is asserted.
The driver has device tree bindings for tCSC ("fsl,spi-cs-sck-delay")
and tASC ("fsl,spi-sck-cs-delay"), but these are only specified to apply
when the chip select toggles in the first place, and this timing
characteristic depends on each peripheral. Many peripherals do not have
explicit timing requirements, so many device trees do not have these
properties present at all.
Nonetheless, the lack of SCK glitches is a common sense requirement, and
since the SCK stays in the idle state during transfers for tCSC+tASC ns,
and that in itself should look like half a cycle, then let's ensure that
tCSC and tASC are at least a quarter of a SCK period, such that their
sum is at least half of one.
Fixes: 95bf15f38641 ("spi: fsl-dspi: Add ~50ns delay between cs and sck")
Reported-by: Lisa Chen (陈敏捷) <minjie.chen@geekplus.com>
Debugged-by: Lisa Chen (陈敏捷) <minjie.chen@geekplus.com>
Tested-by: Lisa Chen (陈敏捷) <minjie.chen@geekplus.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230529223402.1199503-1-vladimir.oltean@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When constructing the sim, gpio-sim constructs an array of named lines,
sized based on the largest offset of any named line, and then initializes
that array with the names of all lines, including unnamed hogs with higher
offsets. In doing so it writes NULLs beyond the extent of the array.
Add a check that only named lines are used to initialize the array.
Fixes: cb8c474e79be ("gpio: sim: new testing module")
Signed-off-by: Kent Gibson<warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of driver specific fixes, none of them particularly
remarkable or severe"
* tag 'spi-fix-v6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: qup: Request DMA before enabling clocks
spi: mt65xx: make sure operations completed before unloading
spi: lpspi: disable lpspi module irq in DMA mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.4
A single fix addressing another MBZ field being non-zero and non-compliant
resulting in the rejection of certain memory interface transmissions by
the receivers(secure partitions). The issue was addressed before but missed
to address this one field which is part of this change.
* tag 'ffa-fix-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Set handle field to zero in memory descriptor
Link: https://lore.kernel.org/r/20230606125720.2816923-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add check for dma_set_mask() and return the error if it fails.
Fixes: 1a6f854f7daa ("spi: cadence-quadspi: Add Xilinx Versal external DMA support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230606093859.27818-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, the error interrupt is never acknowledged, so once active it
will stay active indefinitely, causing the handler to be called in an
infinite loop.
Fixes: 2f0fc4159a6a ("SERIAL: Lantiq: Add driver for MIPS Lantiq SOCs.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Message-ID: <20230602133029.546-1-mail@bernhard-seibold.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use DMA_RESV_USAGE_BOOKKEEP reservation for buffer objects, except for
command buffers for which we use DMA_RESV_USAGE_WRITE (since VPU can
write to command buffer context save area).
Fixes: 0ec8671837a6 ("accel/ivpu: Fix S3 system suspend when not idle")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413063810.3167511-1-stanislaw.gruszka@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- various Microsoft Surface support fixes
- one fix for the INT3472 driver
* tag 'platform-drivers-x86-v6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: int3472: Avoid crash in unregistering regulator gpio
platform/surface: aggregator_tabletsw: Add support for book mode in POS subsystem
platform/surface: aggregator_tabletsw: Add support for book mode in KIP subsystem
platform/surface: aggregator: Allow completion work-items to be executed in parallel
platform/surface: aggregator: Make to_ssam_device_driver() respect constness
|
|
As described in the commit 111a833dc5cb ("firmware: arm_ffa: Set
reserved/MBZ fields to zero in the memory descriptors") some fields in
the memory descriptor have to be zeroed explicitly. The handle field is
one of these, but it was left out from that change, fix this now.
Fixes: 111a833dc5cb ("firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors")
Reported-by: Imre Kis <imre.kis@arm.com>
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Link: https://lore.kernel.org/r/20230601140749.93812-1-balint.dobszay@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Drivers that use the gen_pool*() family of functions should
select GENERIC_ALLOCATOR to prevent build errors like these:
ld: drivers/accel/ivpu/ivpu_ipc.o: in function `gen_pool_free':
include/linux/genalloc.h:172: undefined reference to `gen_pool_free_owner'
ld: drivers/accel/ivpu/ivpu_ipc.o: in function `gen_pool_alloc_algo':
include/linux/genalloc.h:138: undefined reference to `gen_pool_alloc_algo_owner'
ld: drivers/accel/ivpu/ivpu_ipc.o: in function `gen_pool_free':
include/linux/genalloc.h:172: undefined reference to `gen_pool_free_owner'
ld: drivers/accel/ivpu/ivpu_ipc.o: in function `ivpu_ipc_init':
drivers/accel/ivpu/ivpu_ipc.c:441: undefined reference to `devm_gen_pool_create'
ld: drivers/accel/ivpu/ivpu_ipc.o: in function `gen_pool_add_virt':
include/linux/genalloc.h:104: undefined reference to `gen_pool_add_owner'
Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202305221206.1TaugDKP-lkp@intel.com/
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Cc: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Cc: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Cc: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526044519.13441-1-rdunlap@infradead.org
|
|
Statistics read through bond interface via sysfs causes
below bug and traces as it triggers the bonding module to
collect the slave device statistics while holding the spinlock,
beneath that qede->qed driver statistics flow gets scheduled out
due to usleep_range() used in PTT acquire logic
[ 3673.988874] Hardware name: HPE ProLiant DL365 Gen10 Plus/ProLiant DL365 Gen10 Plus, BIOS A42 10/29/2021
[ 3673.988878] Call Trace:
[ 3673.988891] dump_stack_lvl+0x34/0x44
[ 3673.988908] __schedule_bug.cold+0x47/0x53
[ 3673.988918] __schedule+0x3fb/0x560
[ 3673.988929] schedule+0x43/0xb0
[ 3673.988932] schedule_hrtimeout_range_clock+0xbf/0x1b0
[ 3673.988937] ? __hrtimer_init+0xc0/0xc0
[ 3673.988950] usleep_range+0x5e/0x80
[ 3673.988955] qed_ptt_acquire+0x2b/0xd0 [qed]
[ 3673.988981] _qed_get_vport_stats+0x141/0x240 [qed]
[ 3673.989001] qed_get_vport_stats+0x18/0x80 [qed]
[ 3673.989016] qede_fill_by_demand_stats+0x37/0x400 [qede]
[ 3673.989028] qede_get_stats64+0x19/0xe0 [qede]
[ 3673.989034] dev_get_stats+0x5c/0xc0
[ 3673.989045] netstat_show.constprop.0+0x52/0xb0
[ 3673.989055] dev_attr_show+0x19/0x40
[ 3673.989065] sysfs_kf_seq_show+0x9b/0xf0
[ 3673.989076] seq_read_iter+0x120/0x4b0
[ 3673.989087] new_sync_read+0x118/0x1a0
[ 3673.989095] vfs_read+0xf3/0x180
[ 3673.989099] ksys_read+0x5f/0xe0
[ 3673.989102] do_syscall_64+0x3b/0x90
[ 3673.989109] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 3673.989115] RIP: 0033:0x7f8467d0b082
[ 3673.989119] Code: c0 e9 b2 fe ff ff 50 48 8d 3d ca 05 08 00 e8 35 e7 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[ 3673.989121] RSP: 002b:00007ffffb21fd08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 3673.989127] RAX: ffffffffffffffda RBX: 000000000100eca0 RCX: 00007f8467d0b082
[ 3673.989128] RDX: 00000000000003ff RSI: 00007ffffb21fdc0 RDI: 0000000000000003
[ 3673.989130] RBP: 00007f8467b96028 R08: 0000000000000010 R09: 00007ffffb21ec00
[ 3673.989132] R10: 00007ffffb27b170 R11: 0000000000000246 R12: 00000000000000f0
[ 3673.989134] R13: 0000000000000003 R14: 00007f8467b92000 R15: 0000000000045a05
[ 3673.989139] CPU: 30 PID: 285188 Comm: read_all Kdump: loaded Tainted: G W OE
Fix this by collecting the statistics asynchronously from a periodic
delayed work scheduled at default stats coalescing interval and return
the recent copy of statisitcs from .ndo_get_stats64(), also add ability
to configure/retrieve stats coalescing interval using below commands -
ethtool -C ethx stats-block-usecs <val>
ethtool -c ethx
Fixes: 133fac0eedc3 ("qede: Add basic ethtool support")
Cc: Sudarsana Kalluru <skalluru@marvell.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Link: https://lore.kernel.org/r/20230605112600.48238-1-manishc@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fix from Jiri Kosina:
- Final, confirmed fix for regression causing some devices connected
via Logitech HID++ Unifying receiver take too long to initialize
(Benjamin Tissoires)
* tag 'for-linus-2023060501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: hidpp: terminate retry loop on success
|
|
kmemdup() at line 2735 is not duplicating enough memory for
notif->tid_tear_down and notif->station_id. As it only duplicates
612 bytes: up to offsetofend(struct iwl_wowlan_info_notif,
received_beacons), this is the range of [0, 612) bytes.
2735 notif = kmemdup(notif_v1,
2736 offsetofend(struct iwl_wowlan_info_notif,
2737 received_beacons),
2738 GFP_ATOMIC);
which evidently does not cover bytes 612 and 613 for members
tid_tear_down and station_id in struct iwl_wowlan_info_notif.
See below:
$ pahole -C iwl_wowlan_info_notif drivers/net/wireless/intel/iwlwifi/mvm/d3.o
struct iwl_wowlan_info_notif {
struct iwl_wowlan_gtk_status_v3 gtk[2]; /* 0 488 */
/* --- cacheline 7 boundary (448 bytes) was 40 bytes ago --- */
struct iwl_wowlan_igtk_status igtk[2]; /* 488 80 */
/* --- cacheline 8 boundary (512 bytes) was 56 bytes ago --- */
__le64 replay_ctr; /* 568 8 */
/* --- cacheline 9 boundary (576 bytes) --- */
__le16 pattern_number; /* 576 2 */
__le16 reserved1; /* 578 2 */
__le16 qos_seq_ctr[8]; /* 580 16 */
__le32 wakeup_reasons; /* 596 4 */
__le32 num_of_gtk_rekeys; /* 600 4 */
__le32 transmitted_ndps; /* 604 4 */
__le32 received_beacons; /* 608 4 */
u8 tid_tear_down; /* 612 1 */
u8 station_id; /* 613 1 */
u8 reserved2[2]; /* 614 2 */
/* size: 616, cachelines: 10, members: 13 */
/* last cacheline: 40 bytes */
};
Therefore, when the following assignments take place, actually no memory
has been allocated for those objects:
2743 notif->tid_tear_down = notif_v1->tid_tear_down;
2744 notif->station_id = notif_v1->station_id;
Fix this by allocating space for the whole notif object and zero out the
remaining space in memory after member station_id.
This also fixes the following -Warray-bounds issues:
CC drivers/net/wireless/intel/iwlwifi/mvm/d3.o
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function ‘iwl_mvm_wait_d3_notif’:
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2743:30: warning: array subscript ‘struct iwl_wowlan_info_notif[0]’ is partly outside array bounds of ‘unsigned char[612]’ [-Warray-bounds=]
2743 | notif->tid_tear_down = notif_v1->tid_tear_down;
|
from drivers/net/wireless/intel/iwlwifi/mvm/d3.c:7:
In function ‘kmemdup’,
inlined from ‘iwl_mvm_wait_d3_notif’ at drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2735:12:
include/linux/fortify-string.h:765:16: note: object of size 612 allocated by ‘__real_kmemdup’
765 | return __real_kmemdup(p, size, gfp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function ‘iwl_mvm_wait_d3_notif’:
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2744:30: warning: array subscript ‘struct iwl_wowlan_info_notif[0]’ is partly outside array bounds of ‘unsigned char[612]’ [-Warray-bounds=]
2744 | notif->station_id = notif_v1->station_id;
| ^~
In function ‘kmemdup’,
inlined from ‘iwl_mvm_wait_d3_notif’ at drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2735:12:
include/linux/fortify-string.h:765:16: note: object of size 612 allocated by ‘__real_kmemdup’
765 | return __real_kmemdup(p, size, gfp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Link: https://github.com/KSPP/linux/issues/306
Fixes: 905d50ddbc83 ("wifi: iwlwifi: mvm: support wowlan info notification version 2")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/ZHpGN555FwAKGduH@work
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Move capturing the snapshot context into the image request state
machine, after exclusive lock is ensured to be held for the duration of
dealing with the image request. This is needed to ensure correctness
of fast-diff states (OBJECT_EXISTS vs OBJECT_EXISTS_CLEAN) and object
deltas computed based off of them. Otherwise the object map that is
forked for the snapshot isn't guaranteed to accurately reflect the
contents of the snapshot when the snapshot is taken under I/O. This
breaks differential backup and snapshot-based mirroring use cases with
fast-diff enabled: since some object deltas may be incomplete, the
destination image may get corrupted.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/61472
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
Move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting into the object request
state machine to allow for the snapshot context to be captured in the
image request state machine rather than in rbd_queue_workfn().
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
Since commit 3e4be65eb82c ("Bluetooth: hci_qca: Add poweroff support
during hci down for wcn3990"), the setup callback which registers the
debugfs interface can be called multiple times.
This specifically leads to the following error when powering on the
controller:
debugfs: Directory 'ibs' with parent 'hci0' already present!
Add a driver flag to avoid trying to register the debugfs interface more
than once.
Fixes: 3e4be65eb82c ("Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Memory/pages are not freed, when unloading nullblk driver.
Steps to reproduce issue
1.free -h
total used free shared buff/cache available
Mem: 7.8Gi 260Mi 7.1Gi 3.0Mi 395Mi 7.3Gi
Swap: 0B 0B 0B
2.modprobe null_blk memory_backed=1
3.dd if=/dev/urandom of=/dev/nullb0 oflag=direct bs=1M count=1000
4.modprobe -r null_blk
5.free -h
total used free shared buff/cache available
Mem: 7.8Gi 1.2Gi 6.1Gi 3.0Mi 398Mi 6.3Gi
Swap: 0B 0B 0B
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Link: https://lore.kernel.org/r/20230605062354.24785-1-nj.shetty@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It seems we forgot the normal case to terminate the retry loop,
making us asking 3 times each command, which is probably a little bit
too much.
And remove the ugly "goto exit" that can be replaced by a simpler "break"
Fixes: 586e8fede795 ("HID: logitech-hidpp: Retry commands when device is busy")
Suggested-by: Mark Lord <mlord@pobox.com>
Tested-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for 6.4
Error paths is corrected across icc-bwmon, rpmh-rsc, ramp_controller and
rmtfs. The ice module is renamed qcom_ice, to avoid clashing with
existing "ice" driver.
SA8155P-specific RPMh power-domains are introduced to avoid the code
trying to access resources that exists on SM8150, but not on SA8155P.
Lastly, changes to the EDAC driver to fix an issue where the driver
performs mmio based on the wrong register map.
* tag 'qcom-driver-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
EDAC/qcom: Get rid of hardcoded register offsets
EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
dt-bindings: cache: qcom,llcc: Fix SM8550 description
soc: qcom: rpmhpd: Add SA8155P power domains
dt-bindings: power: qcom,rpmpd: Add SA8155P
soc: qcom: Rename ice to qcom_ice to avoid module name conflict
soc: qcom: rmtfs: Fix error code in probe()
soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
soc: qcom: rpmh-rsc: drop redundant unsigned >=0 comparision
soc: qcom: icc-bwmon: fix incorrect error code passed to dev_err_probe()
Link: https://lore.kernel.org/r/20230601141058.2246039-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In cs_dsp_load_coeff() region_name should be set in the XM/YM/ZM
cases otherwise any errors will log the region as "Unknown".
While doing this also change one error message that logged the
region type ID to log the region_name instead. This makes it
consistent with other messages in the same function.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230605143238.4001982-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
HW default for wake sync pulses is 18. 10 precharge and 8 preamble. There
is no reason to change this especially as it is causing problems with
certain eDP panels.
v3: Change "Fixes:" commit
v2: Remove "fast wake" repeat from subject
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Fixes: e1c71f8f9180 ("drm/i915: Fix fast wake AUX sync len")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8475
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530101649.2549949-1-jouni.hogander@intel.com
(cherry picked from commit b29a20f7c4995a059ed764ce42389857426397c7)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
