summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-11-19media: flexcop-usb: fix control-message timeoutsJohan Hovold
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Note that the driver was multiplying some of the timeout values with HZ twice resulting in 3000-second timeouts with HZ=1000. Also note that two of the timeout defines are currently unused. Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-19media: redrat3: fix control-message timeoutsJohan Hovold
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-19media: mceusb: fix control-message timeoutsJohan Hovold
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver") Cc: stable@vger.kernel.org # 2.6.36 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-19media: mtk-vcodec: remove unused func parameterDafna Hirschfeld
The prarameter bs_size to function vpu_enc_encode is not used. Remove it. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-19media: mtk-vcodec: enc: add vp8 profile ctrlDafna Hirschfeld
In order for the encoder to work with gstreamer it needs to have the V4L2_CID_MPEG_VIDEO_VP8_PROFILE ctrl. This patch adds that ctrl with only profile 0 supported. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-19media: hi846: remove the of_match_ptr macroMartin Kepplinger
Similar to other drivers, this should fix a Clang compilar warning when building without CONFIG_OF in which case of_match_ptr() is NULL and the const struct we would use otherwise is unused. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-19media: hi846: include property.h instead of of_graph.hMartin Kepplinger
Include the more portable property.h instead of the OF specific of_graph.h Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-19Merge tag 'amd-drm-fixes-5.16-2021-11-17' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.16-2021-11-17: amdgpu: - Better debugging info for SMU msgs - Better error reporting when adding IP blocks - Fix UVD powergating regression on CZ - Clock reporting fix for navi1x - OLED panel backlight fix - Fix scaling on VGA/DVI for non-DC display code - Fix GLFCLK handling for RGP on some APUs - fix potential memory leak amdkfd: - GPU reset fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211118041638.20831-1-alexander.deucher@amd.com
2021-11-18scsi: target: configfs: Delete unnecessary checks for NULLDan Carpenter
The "item" pointer is always going to be valid pointer and does not need to be checked. But if "item" were NULL then item_to_lun() would not return a NULL, but instead, the container_of() pointer math would return a value in the error pointer range. This confuses static checkers since it looks like a NULL vs IS_ERR() bug. Delete the bogus checks. Link: https://lore.kernel.org/r/20211118084900.GA24550@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-18scsi: target: core: Use RCU helpers for INQUIRY t10_alua_tg_pt_gpMike Christie
Fix the sparse warnings about t10_alua_tg_pt_gp accesses in target_core_spc.c caused by commit 7324f47d4293 ("scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path") That commit replaced the lun_tg_pt_gp_lock use in the I/O path, but it didn't update the INQUIRY code. Link: https://lore.kernel.org/r/20211117213928.8634-1-michael.christie@oracle.com Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-18scsi: mpt3sas: Fix incorrect system timestampSreekanth Reddy
For updating the IOC firmware's timestamp with system timestamp, the driver issues the Mpi26IoUnitControlRequest message. While framing the Mpi26IoUnitControlRequest, the driver should copy the lower 32 bits of the current timestamp into IOCParameterValue field and the higher 32 bits into Reserved7 field. Link: https://lore.kernel.org/r/20211117123215.25487-1-sreekanth.reddy@broadcom.com Fixes: f98790c00375 ("scsi: mpt3sas: Sync time periodically between driver and firmware") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-18scsi: mpt3sas: Fix system going into read-only modeSreekanth Reddy
While determining the SAS address of a drive, the driver checks whether the handle number is less than the HBA phy count or not. If the handle number is less than the HBA phy count then driver assumes that this handle belongs to HBA and hence it assigns the HBA SAS address. During IOC firmware downgrade operation, if the number of HBA phys is reduced and the OS drive's device handle drops below the phy count while determining the drive's SAS address, the driver ends up using the HBA's SAS address. This leads to a mismatch of drive's SAS address and hence the driver unregisters the OS drive and the system goes into read-only mode. Update the IOC's num_phys to the HBA phy count provided by actual loaded firmware. Link: https://lore.kernel.org/r/20211117105058.3505-1-sreekanth.reddy@broadcom.com Fixes: a5e99fda0172 ("scsi: mpt3sas: Update hba_port objects after host reset") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-19Merge tag 'drm-intel-fixes-2021-11-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes One quick fix for return error handling, one fix for ADL-P display and one revert targeting stable 5.4, for TGL's DSI display clocks Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YZbUPIHpR1S3JZ2b@intel.com
2021-11-18scsi: mpt3sas: Fix kernel panic during drive powercycle testSreekanth Reddy
While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL. Link: https://lore.kernel.org/r/20211117104909.2069-1-sreekanth.reddy@broadcom.com Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-18scsi: ufs: ufs-mediatek: Add put_device() after of_find_device_by_node()Ye Guojin
This was found by coccicheck: ./drivers/scsi/ufs/ufs-mediatek.c, 211, 1-7, ERROR missing put_device; call of_find_device_by_node on line 1185, but without a corresponding object release within this function. Link: https://lore.kernel.org/r/20211110105133.150171-1-ye.guojin@zte.com.cn Reported-by: Zeal Robot <zealci@zte.com.cn> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-18scsi: scsi_debug: Fix type in min_t to avoid stack OOBGeorge Kennedy
Change min_t() to use type "u32" instead of type "int" to avoid stack out of bounds. With min_t() type "int" the values get sign extended and the larger value gets used causing stack out of bounds. BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707 CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189 memcpy+0x23/0x60 mm/kasan/shadow.c:65 memcpy include/linux/fortify-string.h:191 [inline] sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000 fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162 fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline] resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline] scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lore.kernel.org/r/1636484247-21254-1-git-send-email-george.kennedy@oracle.com Reported-by: syzkaller <syzkaller@googlegroups.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-18scsi: qla2xxx: edif: Fix off by one bug in qla_edif_app_getfcinfo()Dan Carpenter
The > comparison needs to be >= to prevent accessing one element beyond the end of the app_reply->ports[] array. Link: https://lore.kernel.org/r/20211109115219.GE16587@kili Fixes: 7878f22a2e03 ("scsi: qla2xxx: edif: Add getfcinfo and statistic bsgs") Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-18scsi: ufs: ufshpb: Fix warning in ufshpb_set_hpb_read_to_upiu()Bean Huo
Fix the following sparse warnings in ufshpb_set_hpb_read_to_upiu(): sparse warnings: (new ones prefixed by >>) drivers/scsi/ufs/ufshpb.c:335:27: sparse: sparse: cast from restricted __be64 drivers/scsi/ufs/ufshpb.c:335:25: sparse: expected restricted __be64 [usertype] ppn_tmp drivers/scsi/ufs/ufshpb.c:335:25: sparse: got unsigned long long [usertype] Link: https://lore.kernel.org/r/20211111222452.384089-1-huobean@gmail.com Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-18drm/nouveau/acr: fix a couple NULL vs IS_ERR() checksDan Carpenter
The nvkm_acr_lsfw_add() function never returns NULL. It returns error pointers on error. Fixes: 22dcda45a3d1 ("drm/nouveau/acr: implement new subdev to replace "secure boot"") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211118111314.GB1147@kili
2021-11-18drm/nouveau: recognise GA106Ben Skeggs
I've got HW now, appears to work as expected so far. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: <stable@vger.kernel.org> # 5.14+ Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211118030413.2610-1-skeggsb@gmail.com
2021-11-18Merge tag 'thermal-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix the handling of thermal zones during system resume and disable building of the int340x thermal driver on 32-bit. Specifics: - Prevent the previous high and low thermal zone trip values from being retained over a system suspend-resume cycle (Manaf Meethalavalappu Pallikunhi) - Prevent the int340x thermal driver from being built in 32-bit kernel configurations, because running it on 32-bit is questionable (Arnd Bergmann)" * tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: core: Reset previous low and high trip during thermal zone init thermal: int340x: Limit Kconfig to 64-bit
2021-11-18Merge tag 'pm-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a system-wide suspend issue in the DTPM framework and improve the Energy Model documentation. Specifics: - Fix system suspend handling in DTPM when it is enabled, but not actually used (Daniel Lezcano) - Describe the new cpufreq callback for Energy Model registration and explain the "advanced" and "simple" EM variants in the EM documentation (Lukasz Luba)" * tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Documentation: power: Describe 'advanced' and 'simple' EM models Documentation: power: Add description about new callback for EM registration powercap: DTPM: Fix suspend failure and kernel warning
2021-11-18Merge tag 'acpi-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Revert the change attempting to release PM resources blocked by unused ACPI objects after device enumeration, because it caused boot issues to appear on multiple systems" * tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI: scan: Release PM resources blocked by unused objects"
2021-11-18Merge tag 'platform-drivers-x86-v5.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Various build- and bug-fixes as well as one hardware-id addition" * tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: thinkpad_acpi: fix documentation for adaptive keyboard platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep platform/x86: thinkpad_acpi: Add support for dual fan control platform/x86: think-lmi: Abort probe on analyze failure platform/x86: dell-wmi-descriptor: disable by default platform/x86: samsung-laptop: Fix typo in a comment platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()' platform/x86: amd-pmc: Make CONFIG_AMD_PMC depend on RTC_CLASS platform/mellanox: mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
2021-11-18Merge tag 'spi-fix-v5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small fixes for v5.16, one in the core for an issue with handling of controller unregistration that was introduced with the fixes for registering nested SPI controllers and a few more minor device specific ones" * tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix use-after-free of the add_lock mutex spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan() spi: lpspi: Silence error message upon deferred probe spi: cadence-quadspi: fix write completion support
2021-11-18Merge tag 'net-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, mac80211. Current release - regressions: - devlink: don't throw an error if flash notification sent before devlink visible - page_pool: Revert "page_pool: disable dma mapping support...", turns out there are active arches who need it Current release - new code bugs: - amt: cancel delayed_work synchronously in amt_fini() Previous releases - regressions: - xsk: fix crash on double free in buffer pool - bpf: fix inner map state pruning regression causing program rejections - mac80211: drop check for DONT_REORDER in __ieee80211_select_queue, preventing mis-selecting the best effort queue - mac80211: do not access the IV when it was stripped - mac80211: fix radiotap header generation, off-by-one - nl80211: fix getting radio statistics in survey dump - e100: fix device suspend/resume Previous releases - always broken: - tcp: fix uninitialized access in skb frags array for Rx 0cp - bpf: fix toctou on read-only map's constant scalar tracking - bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs - tipc: only accept encrypted MSG_CRYPTO msgs - smc: transfer remaining wait queue entries during fallback, fix missing wake ups - udp: validate checksum in udp_read_sock() (when sockmap is used) - sched: act_mirred: drop dst for the direction from egress to ingress - virtio_net_hdr_to_skb: count transport header in UFO, prevent allowing bad skbs into the stack - nfc: reorder the logic in nfc_{un,}register_device, fix unregister - ipsec: check return value of ipv6_skip_exthdr - usb: r8152: add MAC passthrough support for more Lenovo Docks" * tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits) ptp: ocp: Fix a couple NULL vs IS_ERR() checks net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock() net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound ipv6: check return value of ipv6_skip_exthdr e100: fix device suspend/resume devlink: Don't throw an error if flash notification sent before devlink visible page_pool: Revert "page_pool: disable dma mapping support..." ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() octeontx2-af: debugfs: don't corrupt user memory NFC: add NCI_UNREG flag to eliminate the race NFC: reorder the logic in nfc_{un,}register_device NFC: reorganize the functions in nci_request tipc: check for null after calling kmemdup i40e: Fix display error code in dmesg i40e: Fix creation of first queue by omitting it if is not power of two i40e: Fix warning message and call stack during rmmod i40e driver i40e: Fix ping is lost after configuring ADq on VF i40e: Fix changing previously set num_queue_pairs for PFs i40e: Fix NULL ptr dereference on VSI filter sync i40e: Fix correct max_pkt_size on VF RX queue ...
2021-11-18Merge tag 'for-5.16/parisc-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "parisc bug and warning fixes and wire up futex_waitv. Fix some warnings which showed up with allmodconfig builds, a revert of a change to the sigreturn trampoline which broke signal handling, wire up futex_waitv and add CONFIG_PRINTK_TIME=y to 32bit defconfig" * tag 'for-5.16/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Enable CONFIG_PRINTK_TIME=y in 32bit defconfig Revert "parisc: Reduce sigreturn trampoline to 3 instructions" parisc: Wrap assembler related defines inside __ASSEMBLY__ parisc: Wire up futex_waitv parisc: Include stringify.h to avoid build error in crypto/api.c parisc/sticon: fix reverse colors
2021-11-18Merge branch 'thermal-int340x'Rafael J. Wysocki
Merge int340x thermal driver Kconfig fix for 5.16-rc2. * thermal-int340x: thermal: int340x: Limit Kconfig to 64-bit
2021-11-18ptp: ocp: Fix a couple NULL vs IS_ERR() checksDan Carpenter
The ptp_ocp_get_mem() function does not return NULL, it returns error pointers. Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18net: ethernet: dec: tulip: de4x5: fix possible array overflows in ↵Teng Qi
type3_infoblock() The definition of macro MOTO_SROM_BUG is: #define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32( dev->dev_addr) & 0x00ffffff) == 0x3e0008) and the if statement if (MOTO_SROM_BUG) lp->active = 0; using this macro indicates lp->active could be 8. If lp->active is 8 and the second comparison of this macro is false. lp->active will remain 8 in: lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2; lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2; lp->phy[lp->active].mci = *p; However, the length of array lp->phy is 8, so array overflows can occur. To fix these possible array overflows, we first check lp->active and then return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8). Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of ↵zhangyue
bound In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the 'for' end, the 'k' is 8. At this time, the array 'lp->phy[8]' may be out of bound. Signed-off-by: zhangyue <zhangyue1@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-David S. Miller
queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-11-17 This series contains updates to i40e driver only. Eryk adds accounting for VLAN header in packet size when VF port VLAN is configured. He also fixes TC queue distribution when the user has changed queue counts as well as for configuration of VF ADQ which caused dropped packets. Michal adds tracking for when a VSI is being released to prevent null pointer dereference when managing filters. Karen ensures PF successfully initiates VF requested reset which could cause a call trace otherwise. Jedrzej moves validation of channel queue value earlier to prevent partial configuration when the value is invalid. Grzegorz corrects the reported error when adding filter fails. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18e100: fix device suspend/resumeJesse Brandeburg
As reported in [1], e100 was no longer working for suspend/resume cycles. The previous commit mentioned in the fixes appears to have broken things and this attempts to practice best known methods for device power management and keep wake-up working while allowing suspend/resume to work. To do this, I reorder a little bit of code and fix the resume path to make sure the device is enabled. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214933 Fixes: 69a74aef8a18 ("e100: use generic power management") Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com> Reported-by: Alexey Kuznetsov <axet@me.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Alexey Kuznetsov <axet@me.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in ↵Teng Qi
hns_dsaf_ge_srst_by_port() The if statement: if (port >= DSAF_GE_NUM) return; limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off; because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6). To fix this possible array overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function returns. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18ata: libata-sata: Declare ata_ncq_sdev_attrs staticDamien Le Moal
Since ata_ncq_sdev_attrs is a local struct, declare it static. This avoids a sparse warning at compile time. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2021-11-18ata: libahci: Adjust behavior when StorageD3Enable _DSD is setMario Limonciello
The StorageD3Enable _DSD is used for the vendor to indicate that the disk should be opted into or out of a different behavior based upon the platform design. For AMD's Renoir and Green Sardine platforms it's important that any attached SATA storage has transitioned into DevSlp when s2idle is used. If the disk is left in active/partial/slumber, then the system is not able to resume properly. When the StorageD3Enable _DSD is detected, check the system is using s2idle and DevSlp is enabled and if so explicitly wait long enough for the disk to enter DevSlp. Cc: Nehal-bakulchandra Shah <Nehal-bakulchandra.Shah@amd.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091 Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2021-11-18ata: ahci: Add Green Sardine vendor ID as board_ahci_mobileMario Limonciello
AMD requires that the SATA controller be configured for devsleep in order for S0i3 entry to work properly. commit b1a9585cc396 ("ata: ahci: Enable DEVSLP by default on x86 with SLP_S0") sets up a kernel policy to enable devsleep on Intel mobile platforms that are using s0ix. Add the PCI ID for the SATA controller in Green Sardine platforms to extend this policy by default for AMD based systems using s0i3 as well. Cc: Nehal-bakulchandra Shah <Nehal-bakulchandra.Shah@amd.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2021-11-18ata: libata: add missing ata_identify_page_supported() callsDamien Le Moal
ata_dev_config_ncq_prio() and ata_dev_config_devslp() both access pages of the IDENTIFY DEVICE data log. Before calling ata_read_log_page(), make sure to check for the existence of the IDENTIFY DEVICE data log and of the log page accessed using ata_identify_page_supported(). This avoids useless error messages from ata_read_log_page() and failures with some LLDD scsi drivers using libsas. Reported-by: Nikolay <knv418@gmail.com> Cc: stable@kernel.org # 5.15 Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Matthew Perkowski <mgperkow@gmail.com>
2021-11-17octeontx2-af: debugfs: don't corrupt user memoryDan Carpenter
The user supplies the "count" value to say how big its read buffer is. The rvu_dbg_lmtst_map_table_display() function does not take the "count" into account but instead just copies the whole table, potentially corrupting the user's data. Introduce the "ret" variable to store how many bytes we can copy. Also I changed the type of "off" to size_t to make using min() simpler. Fixes: 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211117073454.GD5237@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-17drm/amd/amdgpu: fix potential memleakBernard Zhao
In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed There is a potential memleak if not call kobject_put. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-17drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered againshaoyunl
In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch already been called, the start_cpsch will not be called since there is no resume in this case. When reset been triggered again, driver should avoid to do uninitialization again. Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-17drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUsPerry Yuan
add support that allow the userspace tool like RGP to get the GFX clock value at runtime, the fix follow the old way to show the min/current/max clocks level for compatible consideration. === Test === $ cat /sys/class/drm/card0/device/pp_dpm_sclk 0: 200Mhz * 1: 1100Mhz 2: 1600Mhz then run stress test on one APU system. $ cat /sys/class/drm/card0/device/pp_dpm_sclk 0: 200Mhz 1: 1040Mhz * 2: 1600Mhz The current GFXCLK value is updated at runtime. BugLink: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5260 Reviewed-by: Huang Ray <Ray.Huang@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-11-17drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga ↵hongao
and dvi connectors amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode which assign amdgpu_encoder->native_mode with *preferred_mode result in amdgpu_encoder->native_mode.clock always be 0. That will cause amdgpu_connector_set_property returned early on: if ((rmx_type != DRM_MODE_SCALE_NONE) && (amdgpu_encoder->native_mode.clock == 0)) when we try to set scaling mode Full/Full aspect/Center. Add the missing function to amdgpu_connector_vga_get_mode can fix this. It also works on dvi connectors because amdgpu_connector_dvi_helper_funcs.get_mode use the same method. Signed-off-by: hongao <hongao@uniontech.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-11-17drm/amd/display: Fix OLED brightness control on eDPRoman Li
[Why] After commit ("drm/amdgpu/display: add support for multiple backlights") number of eDPs is defined while registering backlight device. However the panel's extended caps get updated once before register call. That leads to regression with extended caps like oled brightness control. [How] Update connector ext caps after register_backlight_device Fixes: 7fd13baeb7a3a4 ("drm/amdgpu/display: add support for multiple backlights") Link: https://www.reddit.com/r/AMDLaptops/comments/qst0fm/after_updating_to_linux_515_my_brightness/ Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Samuel Čavoj <samuel@cavoj.net> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jasdeep Dhillon <Jasdeep.Dhillon@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-11-17i40e: Fix display error code in dmesgGrzegorz Szczurek
Fix misleading display error in dmesg if tc filter return fail. Only i40e status error code should be converted to string, not linux error code. Otherwise, we return false information about the error. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17i40e: Fix creation of first queue by omitting it if is not power of twoJedrzej Jagielski
Reject TCs creation with proper message if the first queue assignment is not equal to the power of two. The first queue number was checked too late in the second queue iteration, if second queue was configured at all. Now if first queue value is not a power of two, then trying to create qdisc will be rejected. Fixes: 8f88b3034db3 ("i40e: Add infrastructure for queue channel support") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17i40e: Fix warning message and call stack during rmmod i40e driverKaren Sornek
Restore part of reset functionality used when reset is called from the VF to reset itself. Without this fix warning message is displayed when VF is being removed via sysfs. Fix the crash of the VF during reset by ensuring that the PF receives the reset message successfully. Refactor code to use one function instead of two. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17drm/amd/pm: Remove artificial freq level on Navi1xLijo Lazar
Print Navi1x fine grained clocks in a consistent manner with other SOCs. Don't show aritificial DPM level when the current clock equals min or max. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-17drm/amd/pm: avoid duplicate powergate/ungate settingEvan Quan
Just bail out if the target IP block is already in the desired powergate/ungate state. This can avoid some duplicate settings which sometimes may cause unexpected issues. Link: https://lore.kernel.org/all/YV81vidWQLWvATMM@zn.tnic/ Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214921 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215025 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1789 Fixes: bf756fb833cb ("drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend") Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Borislav Petkov <bp@suse.de> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-11-17drm/amdgpu: add error print when failing to add IP block(v2)Guchun Chen
Driver initialization is driven by IP version from IP discovery table. So add error print when failing to add ip block during driver initialization, this will be more friendly to user to know which IP version is not correct. [ 40.467361] [drm] host supports REQ_INIT_DATA handshake [ 40.474076] [drm] add ip block number 0 <nv_common> [ 40.474090] [drm] add ip block number 1 <gmc_v10_0> [ 40.474101] [drm] add ip block number 2 <psp> [ 40.474103] [drm] add ip block number 3 <navi10_ih> [ 40.474114] [drm] add ip block number 4 <smu> [ 40.474119] [drm] add ip block number 5 <amdgpu_vkms> [ 40.474134] [drm] add ip block number 6 <gfx_v10_0> [ 40.474143] [drm] add ip block number 7 <sdma_v5_2> [ 40.474147] amdgpu 0000:00:08.0: amdgpu: Fatal error during GPU init [ 40.474545] amdgpu 0000:00:08.0: amdgpu: amdgpu: finishing device. v2: use dev_err to multi-GPU system Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-14 02:57:58 +0000