summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-09-24wifi: ath11k: fix peer addition/deletion error on sta band migrationChristian 'Ansuel' Marangi
This patch try to fix the following error. Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.561227] ath11k c000000.wifi: peer already added vdev id 0 req, vdev id 1 present Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.561282] ath11k c000000.wifi: Failed to add peer: 28:c2:1f:xx:xx:xx for VDEV: 0 Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.568053] ath11k c000000.wifi: Failed to add station: 28:c2:1f:xx:xx:xx for VDEV: 0 Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan2: STA 28:c2:1f:xx:xx:xx IEEE 802.11: Could not add STA to kernel driver Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan2: STA 28:c2:1f:xx:xx:xx IEEE 802.11: did not acknowledge authentication response Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED 28:c2:1f:xx:xx:xx Wed Jun 1 22:19:31 2022 daemon.info hostapd: wlan1: STA 28:c2:1f:xx:xx:xx IEEE 802.11: disassociated due to inactivity Wed Jun 1 22:19:32 2022 daemon.info hostapd: wlan1: STA 28:c2:1f:xx:xx:xx IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE) To repro this: - Have 2 Wifi with the same bssid and pass on different band (2.4 and 5GHz) - Enable 802.11r Fast Transaction with same mobility domain - FT Protocol: FT over the Air From a openwrt system issue the command (with the correct mac) ubus call hostapd.wlan1 wnm_disassoc_imminent '{"addr":"28:C2:1F:xx:xx:xx"}' Notice the log printing the errors. The cause of this error has been investigated and we found that this is related to the WiFi Fast Transaction feature. We observed that this is triggered when the router tells the device to change band. In this case the device first auth to the other band and then the disconnect path from the prev band is triggered. This is problematic with the current rhash implementation since the addrs is used as key and the logic of "adding first, delete later" conflicts with the rhash logic. In fact peer addition will fail since the peer is already added and with that fixed a peer deletion will cause unitended effect by removing the peer just added. Current solution to this is to add additional logic to the peer delete, make sure we are deleting the correct peer taken from the rhash table (and fallback to the peer list) and for the peer add logic delete the peer entry for the rhash list before adding the new one (counting as an error only when a peer with the same vlan_id is asked to be added). With this change, a sta can correctly transition from 2.4GHz and 5GHZ with no drop and no error are printed. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Fixes: 7b0c70d92a43 ("ath11k: Add peer rhash table support") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220603164559.27769-1-ansuelsmth@gmail.com
2022-09-24device property: Add const qualifier to device_get_match_data() parameterAndy Shevchenko
Add const qualifier to the device_get_match_data() parameter. Some of the future users may utilize this function without forcing the type. All the same, dev_fwnode() may be used with a const qualifier. Reported-by: kernel test robot <lkp@intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220922135410.49694-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24drm_print: add _ddebug descriptor to drm_*dbg prototypesJim Cromie
upgrade the callchain to drm_dbg() and drm_dev_dbg(); add a struct _ddebug ptr parameter to them, and supply that additional param by replacing the '_no_desc' flavor of dyndbg Factory macro currently used with the flavor that supplies the descriptor. NOTES: The descriptor gives these fns access to the decorator flags, but they do none of the dynamic-prefixing done by dynamic_emit_prefix(), which is currently static. DRM already has conventions for logging/messaging; just tossing optional decorations on top probably wouldn't help. Instead, existing flags (or new ones, perhaps 'sd' ala lspci) can be used to make current message conventions optional. This suggests a new drmdbg_prefix_emit() to handle prefixing locally. For CONFIG_DRM_USE_DYNAMIC_DEBUG=N, just pass null descriptor. desc->class_id is redundant with category parameter, but its availability is dependent on desc. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220912052852.1123868-10-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24drm_print: prefer bare printk KERN_DEBUG on generic fnJim Cromie
drm_print.c calls pr_debug() just once, from __drm_printfn_debug(), which is a generic/service fn. The callsite is compile-time enabled by DEBUG in both DYNAMIC_DEBUG=y/n builds. For dyndbg builds, reverting this callsite back to bare printk is correcting a few anti-features: 1- callsite is generic, serves multiple drm users. it is soft-wired on currently by #define DEBUG could accidentally: #> echo -p > /proc/dynamic_debug/control 2- optional "decorations" by dyndbg are unhelpful/misleading here, they describe only the generic site, not end users IOW, 1,2 are unhelpful at best, and possibly confusing. reverting yields a nominal data and text shrink: text data bss dec hex filename 462583 36604 54592 553779 87333 /kernel/drivers/gpu/drm/drm.ko 462515 36532 54592 553639 872a7 -dirty/kernel/drivers/gpu/drm/drm.ko Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220912052852.1123868-9-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24drm_print: optimize drm_debug_enabled for jump-labelJim Cromie
When CONFIG_DRM_USE_DYNAMIC_DEBUG=y, the drm.debug API (a macro stack, calling _+drm_*dbg() eventually) invokes a dyndbg Factory macro to create a descriptor for each callsite, thus making them individually >control-able. In this case, the calls to _drm_*dbg are unreachable unless the callsite is enabled. So those calls can short-circuit their early do-nothing returns. Provide and use __drm_debug_enabled(), to do this when config'd, or the _raw flags-check otherwize. And since dyndbg is in use, lets also instrument the remaining users of drm_debug_enabled, by wrapping the _raw in a macro with a: pr_debug("todo: is this frequent enough to optimize ?\n"); For CONFIG_DRM_USE_DYNAMIC_DEBUG=n, do no site instrumenting at all, since JUMP_LABEL might be off, and we don't want to make work. With drm, amdgpu, i915, nouveau loaded, heres remaining uses of drm_debug_enabled(), which costs ~1.5kb data to control the pr_debug("todo:..")s. Some of those uses might be ok to use __drm_debug_enabled() by inspection, others might warrant conversion to use dyndbg Factory macros, and that would want callrate data to estimate the savings possible. TBH, any remaining savings are probably small; drm.debug covers the vast bulk of the uses. Maybe "vblank" is the exception. :#> grep todo /proc/dynamic_debug/control | wc 21 168 2357 :#> grep todo /proc/dynamic_debug/control drivers/gpu/drm/drm_edid_load.c:178 [drm]edid_load =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/drm_vblank.c:410 [drm]drm_crtc_accurate_vblank_count =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/drm_vblank.c:787 [drm]drm_crtc_vblank_helper_get_vblank_timestamp_internal =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/drm_vblank.c:1491 [drm]drm_vblank_restore =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/drm_vblank.c:1433 [drm]drm_vblank_enable =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/drm_plane.c:2168 [drm]drm_mode_setplane =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/display/drm_dp_mst_topology.c:1359 [drm_display_helper]drm_dp_mst_wait_tx_reply =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/display/drm_dp_mst_topology.c:2864 [drm_display_helper]process_single_tx_qlock =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/display/drm_dp_mst_topology.c:2909 [drm_display_helper]drm_dp_queue_down_tx =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/display/drm_dp_mst_topology.c:1686 [drm_display_helper]drm_dp_mst_update_slots =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/i915/display/intel_dp.c:1111 [i915]intel_dp_print_rates =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/i915/display/intel_backlight.c:5434 [i915]cnp_enable_backlight =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/i915/display/intel_backlight.c:5459 [i915]intel_backlight_device_register =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/i915/display/intel_opregion.c:43 [i915]intel_opregion_notify_encoder =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/i915/display/intel_opregion.c:53 [i915]asle_set_backlight =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/i915/display/intel_bios.c:1088 [i915]intel_bios_is_dsi_present =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/i915/display/intel_display_debugfs.c:6153 [i915]i915_drrs_ctl_set =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/i915/intel_pcode.c:26 [i915]snb_pcode_read =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/i915/i915_getparam.c:785 [i915]i915_getparam_ioctl =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:282 [amdgpu]vcn_v2_5_process_interrupt =_ "todo: maybe avoid via dyndbg\n" drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:433 [amdgpu]vcn_v2_0_process_interrupt =_ "todo: maybe avoid via dyndbg\n" :#> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220912052852.1123868-8-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24drm_print: wrap drm_*_dbg in dyndbg descriptor factory macroJim Cromie
For CONFIG_DRM_USE_DYNAMIC_DEBUG=y, wrap __drm_dbg() & __drm_dev_dbg() in one of dyndbg's Factory macros: _dynamic_func_call_no_desc(). This adds the callsite descriptor into the code, and an entry for each into /proc/dynamic_debug/control. #> echo class DRM_UT_ATOMIC +p > /proc/dynamic_debug/control CONFIG_DRM_USE_DYNAMIC_DEBUG=y/n is configurable because of the .data footprint cost of per-callsite control; 56 bytes/site * ~2k for i915, ~4k callsites for amdgpu. This is large enough that a kernel builder might not want it. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220912052852.1123868-5-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24drm_print: interpose drm_*dbg with forwarding macrosJim Cromie
change drm_dev_dbg & drm_dbg to macros, which forward to the renamed functions (with __ prefix added). Those functions sit below the categorized layer of macros implementing the DRM debug.category API, and implement most of it. These are good places to insert dynamic-debug jump-label mechanics, which will allow DRM to avoid the runtime cost of drm_debug_enabled(). no functional changes. memory cost baseline: (unchanged) bash-5.1# drms_load [ 9.220389] dyndbg: 1 debug prints in module drm [ 9.224426] ACPI: bus type drm_connector registered [ 9.302192] dyndbg: 2 debug prints in module ttm [ 9.305033] dyndbg: 8 debug prints in module video [ 9.627563] dyndbg: 127 debug prints in module i915 [ 9.721505] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 10.091345] dyndbg: 2196 debug prints in module amdgpu [ 10.106589] [drm] amdgpu kernel modesetting enabled. [ 10.107270] amdgpu: CRAT table not found [ 10.107926] amdgpu: Virtual CRAT table created for CPU [ 10.108398] amdgpu: Topology: Add CPU node [ 10.168507] dyndbg: 3 debug prints in module wmi [ 10.329587] dyndbg: 3 debug prints in module nouveau Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220912052852.1123868-4-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.Jim Cromie
Use DECLARE_DYNDBG_CLASSMAP across DRM: - in .c files, since macro defines/initializes a record - in drivers, $mod_{drv,drm,param}.c ie where param setup is done, since a classmap is param related - in drm/drm_print.c since existing __drm_debug param is defined there, and we ifdef it, and provide an elaborated alternative. - in drm_*_helper modules: dp/drm_dp - 1st item in makefile target drivers/gpu/drm/drm_crtc_helper.c - random pick iirc. Since these modules all use identical CLASSMAP declarations (ie: names and .class_id's) they will all respond together to "class DRM_UT_*" query-commands: :#> echo class DRM_UT_KMS +p > /proc/dynamic_debug/control NOTES: This changes __drm_debug from int to ulong, so BIT() is usable on it. DRM's enum drm_debug_category values need to sync with the index of their respective class-names here. Then .class_id == category, and dyndbg's class FOO mechanisms will enable drm_dbg(DRM_UT_KMS, ...). Though DRM needs consistent categories across all modules, thats not generally needed; modules X and Y could define FOO differently (ie a different NAME => class_id mapping), changes are made according to each module's private class-map. No callsites are actually selected by this patch, since none are class'd yet. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220912052852.1123868-3-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()Yang Yingliang
Use IS_ERR_OR_NULL() helper in device_create_groups_vargs() to simplify code and improve readiblity. No functional change. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220914140753.3799982-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24firmware: google: Test spinlock on panic path to avoid lockupsGuilherme G. Piccoli
Currently the gsmi driver registers a panic notifier as well as reboot and die notifiers. The callbacks registered are called in atomic and very limited context - for instance, panic disables preemption and local IRQs, also all secondary CPUs (not executing the panic path) are shutdown. With that said, taking a spinlock in this scenario is a dangerous invitation for lockup scenarios. So, fix that by checking if the spinlock is free to acquire in the panic notifier callback - if not, bail-out and avoid a potential hang. Fixes: 74c5b31c6618 ("driver: Google EFI SMI") Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: David Gow <davidgow@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julius Werner <jwerner@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Link: https://lore.kernel.org/r/20220909200755.189679-1-gpiccoli@igalia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24bus: mvebu-mbus: use DEFINE_SHOW_ATTRIBUTE to simplify mvebu_{sdram/devs}_debugLiu Shixin
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20220916141244.2174005-1-liushixin2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24mei: gsc: Remove redundant dev_err callShang XiaoJing
devm_ioremap_resource() prints error message in itself. Remove the dev_err call to avoid redundant error message. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20220923100841.17719-1-shangxiaojing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24mei: fix repeated words in commentsJilin Yuan
Delete the redundant word 'from'. Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20220918100431.28381-1-yuanjilin@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24drivers/misc/sgi-xp: Remove orphan declarations from drivers/misc/sgi-xp/xp.hGaosheng Cui
Remove the following orphan declarations from drivers/misc/sgi-xp/xp.h: 1. xp_nofault_PIOR_target 2. xp_error_PIOR 3. xp_nofault_PIOR They have been removed since commit 9726bfcdb977 ("misc/sgi-xp: remove SGI SN2 support"), so remove them. Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20220913110356.764711-1-cuigaosheng1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: u-boot-env: fix crc32 casting typeRafał Miłecki
This fixes: drivers/nvmem/u-boot-env.c:141:17: sparse: sparse: cast to restricted __le32 Fixes: d5542923f200 ("nvmem: add driver handling U-Boot environment variables") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-14-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: lan9662-otp: add supportHoratiu Vultur
Add support for OTP controller available on LAN9662. The OTPC controls the access to a non-volatile memory. The size of the memory is 8KB. The OTPC can access the memory based on an offset. Implement both the read and the write functionality. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-13-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: u-boot-env: find Device Tree nodes for NVMEM cellsRafał Miłecki
DT binding allows specifying NVMEM cells as NVMEM device (provider) subnodes. Looks for such subnodes when building NVMEM cells. This allows NVMEM consumers to use U-Boot environment variables. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-11-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: sort config symbols alphabeticallyRafał Miłecki
1. Match what most subsystems do 2. Simplify maintenance a bit 3. Reduce amount of conflicts for new drivers patches While at it unify indent level in Makefile. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-9-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: prefix all symbols with NVMEM_Rafał Miłecki
This unifies all NVMEM symbols. They follow one style now. Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: brcm_nvram: Use kzalloc for allocating only one elementKenneth Lee
Use kzalloc(...) rather than kcalloc(1, ...) because the number of elements we are specifying in this case is 1, so kzalloc would accomplish the same thing and we can simplify. Signed-off-by: Kenneth Lee <klee33@uw.edu> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-6-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: core: add error handling for dev_set_nameGaosheng Cui
The type of return value of dev_set_name is int, which may return wrong result, so we add error handling for it to reclaim memory of nvmem resource, and return early when an error occurs. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24mtd: allow getting MTD device associated with a specific DT nodeRafał Miłecki
MTD subsystem API allows interacting with MTD devices (e.g. reading, writing, handling bad blocks). So far a random driver could get MTD device only by its name (get_mtd_device_nm()). This change allows getting them also by a DT node. This API is required for drivers handling DT defined MTD partitions in a specific way (e.g. U-Boot (sub)partition with environment variables). Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: add driver handling U-Boot environment variablesRafał Miłecki
U-Boot stores its setup as environment variables. It's a list of key-value pairs stored on flash device with a custom header. This commit adds an NVMEM driver that: 1. Provides NVMEM access to environment vars binary data 2. Extracts variables as NVMEM cells Current Linux's NVMEM sysfs API allows reading whole NVMEM data block. It can be used by user-space tools for reading U-Boot env vars block without the hassle of finding its location. Parsing will still need to be re-done there. Kernel-parsed NVMEM cells can be read however by Linux drivers. This may be useful for Ethernet drivers for reading device MAC address which is often stored as U-Boot env variable. Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24slimbus: qcom-ngd: Add error handling in of_qcom_slim_ngd_registerLin Yujun
No error handling is performed when platform_device_add() return fails. Refer to the error handling of driver_set_override(), add error handling for platform_device_add(). Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Lin Yujun <linyujun809@huawei.com> Link: https://lore.kernel.org/r/20220914031953.94061-1-linyujun809@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24nvmem: core: Fix memleak in nvmem_register()Gaosheng Cui
dev_set_name will alloc memory for nvmem->dev.kobj.name in nvmem_register, when nvmem_validate_keepouts failed, nvmem's memory will be freed and return, but nobody will free memory for nvmem->dev.kobj.name, there will be memleak, so moving nvmem_validate_keepouts() after device_register() and let the device core deal with cleaning name in error cases. Fixes: de0534df9347 ("nvmem: core: fix error handling while validating keepout regions") Cc: stable@vger.kernel.org Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916120402.38753-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24slimbus: qcom-ngd-ctrl: allow compile testing without QCOM_RPROC_COMMONKrzysztof Kozlowski
The Qualcomm common remote-proc code (CONFIG_QCOM_RPROC_COMMON) has necessary stubs, so it is not needed for compile testing. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122910.170730-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24slimbus: qcom-ngd: simplify error paths with dev_err_probeKrzysztof Kozlowski
Use dev_err_probe to skip printing of deferred probe errors and to simplify error paths. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122910.170730-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24slimbus: qcom-ngd: cleanup in probe error pathKrzysztof Kozlowski
Add proper error path in probe() to cleanup resources previously acquired/allocated to fix warnings visible during probe deferral: notifier callback qcom_slim_ngd_ssr_notify already registered WARNING: CPU: 6 PID: 70 at kernel/notifier.c:28 notifier_chain_register+0x5c/0x90 Modules linked in: CPU: 6 PID: 70 Comm: kworker/u16:1 Not tainted 6.0.0-rc3-next-20220830 #380 Call trace: notifier_chain_register+0x5c/0x90 srcu_notifier_chain_register+0x44/0x90 qcom_register_ssr_notifier+0x38/0x4c qcom_slim_ngd_ctrl_probe+0xd8/0x400 platform_probe+0x6c/0xe0 really_probe+0xbc/0x2d4 __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x12c __device_attach_driver+0xb8/0x120 bus_for_each_drv+0x78/0xd0 __device_attach+0xa8/0x1c0 device_initial_probe+0x18/0x24 bus_probe_device+0xa0/0xac deferred_probe_work_func+0x88/0xc0 process_one_work+0x1d4/0x320 worker_thread+0x2cc/0x44c kthread+0x110/0x114 ret_from_fork+0x10/0x20 Fixes: e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122910.170730-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24slimbus: qcom-ngd: use correct error in message of pdr_add_lookup() failureKrzysztof Kozlowski
Use correct error code, instead of previous 'ret' value, when printing error from pdr_add_lookup() failure. Fixes: e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122910.170730-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24wifi: rtw89: support for enable/disable MSDU aggregationKuan-Chung Chen
To enable/disable amsdu in set_tid_config, and currently only support to configure all tids (==0xff) for AMSDU, not individual tid. The command example is: iw wlan0 set tidconf tids 0xff amsdu off iw wlan0 set tidconf peer xx:xx:xx:xx:xx:xx tids 0xff amsdu on Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922012737.15091-1-pkshih@realtek.com
2022-09-24wifi: rtw89: disable 26-tone RU HE TB PPDU transmissionsKuan-Chung Chen
Align with the spec of 802.11ax, follow the conditions for not responding with an HE TB PPDU. When there are OBSS that cannot interpret 26-tone RU transmissions, we should disable such transmissions. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922012719.15037-1-pkshih@realtek.com
2022-09-24wifi: rtw89: support for processing P2P power savingDian-Syuan Yang
Support P2P client to process Notice of Absence (NoA) mechanism when it connects with P2P GO applying an NoA schedule. We define some action types including init, update, remove and terminate in h2c function to enable/disable NoA schedule. Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-6-pkshih@realtek.com
2022-09-24wifi: rtw89: support WMM-PS in P2P GO modeDian-Syuan Yang
To handle a connected client using WMM-PS, the P2P GO also need to enable this power save mechanism. We add WIPHY_FLAG_AP_UAPSD flag to support it and define maximum number of buffered frames the WMM GO may deliver to the WMM client. Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-5-pkshih@realtek.com
2022-09-24wifi: rtw89: set wifi_role of P2PPing-Ke Shih
Consider vif->p2p to set wifi_role to let firmware know current vif is running as GC or GO. And, allow GC to enter PS mode, but disallow to enter deep PS for now. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-4-pkshih@realtek.com
2022-09-24wifi: rtw89: send OFDM rate only in P2P modeDian-Syuan Yang
Check IEEE80211_TX_CTL_NO_CCK_RATE flag to avoid sending frames with CCK rates in 2GHz band. In TX flow, add IEEE80211_TX_CTL_NO_CCK_RATE flag to check and get its lowest rate without CCK rates if the TX type is mgmt frames or data frames. Besides, the decision of phy rate and retry rate in P2P mode are also be handled. In P2P GO mode, it should send beacon of no CCK rates in its frame rate. Therefore, We add a condition to decide which rate is added to beacon content. Moreover, we avoid setting a mask of rates to be used for rate control selection before and after connection in P2P mode. Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-3-pkshih@realtek.com
2022-09-24wifi: rtw89: support P2PPo Hao Huang
To support P2P in driver, we set P2P interface mode to the wiphy allocated for 802.11 PHY and add a change interface function to switch the interface type to P2P. Signed-off-by: Po Hao Huang <phhuang@realtek.com> Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-2-pkshih@realtek.com
2022-09-24wifi: rt2x00: correctly set BBP register 86 for MT7620Daniel Golle
Instead of 0 set the correct value for BBP register 86 for MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/257267247ee4fa7ebc6a5d0c4948b3f8119c0d77.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: set SoC wmac clock registerDaniel Golle
Instead of using the default value 33 (pci), set US_CYC_CNT init based on Programming guide: If available, set chipset bus clock with fallback to cpu clock/3. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: set VGC gain for both chains of MT7620Daniel Golle
Set bbp66 for all chains of the MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/29e161397e5c9d9399da0fe87d44458aa2b90a78.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620Daniel Golle
Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the vendor driver[1]. [1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/4be38975ce600a34249e12d09a3cb758c6e71071.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: fix HT20/HT40 bandwidth switch on MT7620Daniel Golle
Add missing configuration of the channel bandwidth filter to the channel setup function for MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1664d89ba149f7b0bcec18b2a2abaedf49654507.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: move helper functions up in fileDaniel Golle
Move register access helper functions up to the head of the file so they can be used in all functions. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/c27baa8efd5c29e2bcb2432925d9cdc5c913a125.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add TX LOFT calibration for MT7620Tomislav Požega
Add TX LOFT calibration from mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/d9295a9138a1f552b648aacb84e1419d38f5c896.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620Daniel Golle
The function rt2800_iq_calibrate is intended for Rt5592 only. Don't call it for MT7620 which has it's own calibration functions. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/31a1c34ddbd296b82f38c18c9ae7339059215fdc.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RXIQ calibration for MT7620Tomislav Požega
Add RXIQ calibration found in mtk driver. With old openwrt builds this gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout). Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/033a39a697d51f6df258acea4c33608e0944fe4c.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RXDCOC calibration for MT7620Tomislav Požega
Add RXDCOC calibration code from mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> [fixed typo reported by Serge Vasilugin <vasilugin@yandex.ru>] Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/850b30f652e88de30d79e968af4eb47aa5bc2511.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add r calibration for MT7620Tomislav Požega
Add r calibration code as found in mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e0c34f233089bec4eb73826bc4f512166ee25934.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RF self TXDC calibration for MT7620Tomislav Požega
Add TX self calibration based on mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/dbb6e5a0c12d6101477bd09e83253091d21512c9.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: move up and reuse busy wait functionsDaniel Golle
Move bbp_ready and rf_ready busy wait functions up in the code so they can more easily be used. Allow specifying register mask in rf_ready function which is useful for calibration routines which will be added in follow-up commits. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3fdb9dc15e76a9f9c1948b4a3a1308a7a5677bb8.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add support for external PA on MT7620Daniel Golle
Implement support for external PA connected to MT7620A. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> [pozega.tomislav@gmail.com: use chanreg and dccal helpers.] Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/af2c68ff831816a86fc39b0c10911c129a1f03dc.1663445157.git.daniel@makrotopia.org
generated by cgit (git 2.34.1) at 2025-09-16 11:08:41 +0000