summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-10-03drm/i915/psr: Fix PSR_IMR/IIR field handlingJouni Högander
Current PSR code is supposed to use TRANSCODER_EDP to force 0 shift for bits in PSR_IMR/IIR registers: /* * gen12+ has registers relative to transcoder and one per transcoder * using the same bit definition: handle it as TRANSCODER_EDP to force * 0 shift in bit definition */ At the time of writing the code assumption "TRANSCODER_EDP == 0" was made. This is not the case and all fields in PSR_IMR and PSR_IIR are shifted incorrectly if DISPLAY_VER >= 12. Fix this by adding separate register field defines for >=12 and add bit getter functions to keep code readability. v4: - Remove EDP from TGL definitions (José) - Use REG_BIT and REG_GENMASK (José) v3: - Add separate register field defines (José) - Add bit getter functions (José) v2: - Improve commit message (José) Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Fixes: 8241cfbe67f4 ("drm/i915/tgl: Access the right register when handling PSR interruptions") Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221003072011.72408-1-jouni.hogander@intel.com (cherry picked from commit 8da8e32e0b095613af2c2ce4b322240269164a8e) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-10-03drm/i915/ehl: Update MOCS table for EHLTejas Upadhyay
Add these extra EHL entries back since we have drm-tip commit 13d29c823738 ("drm/i915/ehl: unconditionally flush the pages on acquire") introduces proper flushing to make it work as expected. Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Fixes: 046091758b50 ("Revert "drm/i915/ehl: Update MOCS table for EHL"") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Acked-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220930133223.2757282-1-tejas.upadhyay@intel.com (cherry picked from commit 6fa964c045a6bc3321a9186e87bfbcfd1059b0f1) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-10-03of: base: Shift refcount decrement in of_find_last_cache_level()Pierre Gondois
Currently, of_find_next_cache_node() and of_property_read_u32() are called on objects after their refcount have been decremented. Re-order the calls to decrement the refcount after the function calls. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Link: https://lore.kernel.org/r/20220930144936.2882481-1-pierre.gondois@arm.com Signed-off-by: Rob Herring <robh@kernel.org>
2022-10-03irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmapVladimir Oltean
The irqchip->irq_set_type method is called by __irq_set_trigger() under the desc->lock raw spinlock. The ls-extirq implementation, ls_extirq_irq_set_type(), uses an MMIO regmap created by of_syscon_register(), which uses plain spinlocks (the kind that are sleepable on RT). Therefore, this is an invalid locking scheme for which we get a kernel splat stating just that ("[ BUG: Invalid wait context ]"), because the context in which the plain spinlock may sleep is atomic due to the raw spinlock. We need to go raw spinlocks all the way. Make this driver ioremap its INTPCR register on its own, and stop relying on syscon to provide a regmap. Fixes: 0dcd9f872769 ("irqchip: Add support for Layerscape external interrupt lines") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> [maz: trimmed down commit log] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220728144254.175385-1-vladimir.oltean@nxp.com
2022-10-03Merge tag 'asoc-v6.1' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v6.1 This has been a very quiet release for the core but quite a busy one for drivers with a big crop of new drivers and lots of feature additions and fixes to existing ones: - A new string helper parse_int_array_user(). - Improvements to the SOF IPC4 code, especially around trace. - Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450 and Texas Instruments SRC4392 There is a conflict with the conversion of I2C remove functions to void in the cs42l42 driver which is fairly straightforward to resolve but should be highlighted to Linus.
2022-10-03Merge tag 'efi-next-for-v6.1' into loongarch-nextHuacai Chen
LoongArch architecture changes for 6.1 depend on the efi changes to work, so merge them to create a base.
2022-10-03net: wwan: iosm: Call mutex_init before locking itMaxim Mikityanskiy
wwan_register_ops calls wwan_create_default_link, which ends up in the ipc_wwan_newlink callback that locks ipc_wwan->if_mutex. However, this mutex is not yet initialized by that point. Fix it by moving mutex_init above the wwan_register_ops call. This also makes the order of operations in ipc_wwan_init symmetric to ipc_wwan_deinit. Fixes: 83068395bbfc ("net: iosm: create default link via WWAN core") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-pf: mcs: Introduce MACSEC hardware offloadingSubbaraya Sundeep
This patch introduces the macsec offload feature to cn10k PF netdev driver. The macsec offload ops like adding, deleting and updating SecYs, SCs, SAs and stats are supported. XPN support will be added in later patches. Some stats use same counter in hardware which means based on the SecY mode the same counter represents different stat. Hence when SecY mode/policy is changed then snapshot of current stats are captured. Also there is no provision to specify the unique flow-id/SCI per packet to hardware hence different mac address needs to be set for macsec interfaces. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Add debugfs supportGeetha sowjanya
This patch adds debugfs entry to dump MCS secy, sc, sa, flowid and port stats. This helps in debugging the packet path and to figure out where exactly packet was dropped. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Handle MCS block interruptsGeetha sowjanya
Hardware triggers an interrupt for events like PN wrap to zero, PN crosses set threshold. This interrupt is received by the MCS_AF. MCS AF then finds the PF/VF to which SA is mapped and notifies them using mcs_intr_notify mbox message. PF/VF using mcs_intr_cfg mbox can configure the list of interrupts for which they want to receive the notification from AF. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Support for stats collectionGeetha sowjanya
Add mailbox messages to return the resource stats to the caller. Stats of SecY, SC and SAs as per the macsec standard, TCAM flow id hits/miss, mailbox to clear the stats are implemented. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Install a default TCAM for normal trafficGeetha sowjanya
Out of all the TCAM entries, reserve last TX and RX TCAM flow entry(low priority) so that normal traffic can be sent out and received. The traffic which needs macsec processing hits the high priority TCAM flows. Also install a FLR handler to free the allocated resources for PF/VF. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Manage the MCS block hardware resourcesGeetha sowjanya
To establish a macsec connection association netdev driver needs hardware resources like SecY, TCAM flows, SCs and SAs. This patch manages allocating, freeing and configuring those resources. AF consumers can request resources and configure them via these mailbox messages. AF can allocate until it runs out of hardware resources. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Add mailboxes for port related operationsGeetha sowjanya
There are set of configurations to be done at MCS port level like bringing port out of reset, making port as operational or bypass. This patch adds all the port related mailbox message handlers so that AF consumers can use them. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: Introduce driver for macsec block.Geetha sowjanya
CN10K-B and CNF10K-B has macsec block(MCS) to encrypt and decrypt packets at MAC level. This block is a global resource with hardware resources like SecYs, SCs and SAs and is in between NIX block and RPM LMAC. CN10K-B silicon has only one MCS block which receives packets from all LMACS whereas CNF10K-B has seven MCS blocks for seven LMACs. Both MCS blocks are similar in operation except for few register offsets and some configurations require writing to different registers. Those differences between IPs are handled using separate ops. This patch adds basic driver and does the initial hardware calibration and parser configuration. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03eth: sp7021: fix use after free bug in spl2sw_nvmem_get_mac_addressZheng Wang
This frees "mac" and tries to display its address as part of the error message on the next line. Swap the order. Fixes: fd3040b9394c ("net: ethernet: Add driver for Sunplus SP7021") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: lan966x: Add port mirroring support using tc-matchallHoratiu Vultur
Add support for port mirroring. It is possible to mirror only one port at a time and it is possible to have both ingress and egress mirroring. Frames injected by the CPU don't get egress mirrored because they are bypassing the analyzer module. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: lan966x: Add port police support using tc-matchallHoratiu Vultur
Add support for port police. It is possible to police only on the ingress side. To be able to add police support also it was required to add tc-matchall classifier offload support. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: fec: using page pool to manage RX buffersShenwei Wang
This patch optimizes the RX buffer management by using the page pool. The purpose for this change is to prepare for the following XDP support. The current driver uses one frame per page for easy management. Added __maybe_unused attribute to the following functions to avoid the compiling warning. Those functions will be removed by a separate patch once this page pool solution is accepted. - fec_enet_new_rxbdp - fec_enet_copybreak The following are the comparing result between page pool implementation and the original implementation (non page pool). --- small packet (64 bytes) testing are almost the same --- no matter what the implementation is --- on both i.MX8 and i.MX6SX platforms. shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 -l 64 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 39728 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 37.0 MBytes 311 Mbits/sec [ 1] 1.0000-2.0000 sec 36.6 MBytes 307 Mbits/sec [ 1] 2.0000-3.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 3.0000-4.0000 sec 37.1 MBytes 312 Mbits/sec [ 1] 4.0000-5.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 5.0000-6.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 6.0000-7.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 7.0000-8.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 0.0000-8.0943 sec 299 MBytes 310 Mbits/sec --- Page Pool implementation on i.MX8 ---- shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 43204 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 111 MBytes 933 Mbits/sec [ 1] 1.0000-2.0000 sec 111 MBytes 934 Mbits/sec [ 1] 2.0000-3.0000 sec 112 MBytes 935 Mbits/sec [ 1] 3.0000-4.0000 sec 111 MBytes 933 Mbits/sec [ 1] 4.0000-5.0000 sec 111 MBytes 934 Mbits/sec [ 1] 5.0000-6.0000 sec 111 MBytes 933 Mbits/sec [ 1] 6.0000-7.0000 sec 111 MBytes 931 Mbits/sec [ 1] 7.0000-8.0000 sec 112 MBytes 935 Mbits/sec [ 1] 8.0000-9.0000 sec 111 MBytes 933 Mbits/sec [ 1] 9.0000-10.0000 sec 112 MBytes 935 Mbits/sec [ 1] 0.0000-10.0077 sec 1.09 GBytes 933 Mbits/sec --- Non Page Pool implementation on i.MX8 ---- shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 49154 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 104 MBytes 868 Mbits/sec [ 1] 1.0000-2.0000 sec 105 MBytes 878 Mbits/sec [ 1] 2.0000-3.0000 sec 105 MBytes 881 Mbits/sec [ 1] 3.0000-4.0000 sec 105 MBytes 879 Mbits/sec [ 1] 4.0000-5.0000 sec 105 MBytes 878 Mbits/sec [ 1] 5.0000-6.0000 sec 105 MBytes 878 Mbits/sec [ 1] 6.0000-7.0000 sec 104 MBytes 875 Mbits/sec [ 1] 7.0000-8.0000 sec 104 MBytes 875 Mbits/sec [ 1] 8.0000-9.0000 sec 104 MBytes 873 Mbits/sec [ 1] 9.0000-10.0000 sec 104 MBytes 875 Mbits/sec [ 1] 0.0000-10.0073 sec 1.02 GBytes 875 Mbits/sec --- Page Pool implementation on i.MX6SX ---- shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 57288 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 78.8 MBytes 661 Mbits/sec [ 1] 1.0000-2.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 2.0000-3.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 3.0000-4.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 4.0000-5.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 5.0000-6.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 6.0000-7.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 7.0000-8.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 8.0000-9.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 9.0000-9.5506 sec 45.0 MBytes 686 Mbits/sec [ 1] 0.0000-9.5506 sec 783 MBytes 688 Mbits/sec --- Non Page Pool implementation on i.MX6SX ---- shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 36486 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 70.5 MBytes 591 Mbits/sec [ 1] 1.0000-2.0000 sec 64.5 MBytes 541 Mbits/sec [ 1] 2.0000-3.0000 sec 73.6 MBytes 618 Mbits/sec [ 1] 3.0000-4.0000 sec 73.6 MBytes 618 Mbits/sec [ 1] 4.0000-5.0000 sec 72.9 MBytes 611 Mbits/sec [ 1] 5.0000-6.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 6.0000-7.0000 sec 73.5 MBytes 617 Mbits/sec [ 1] 7.0000-8.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 8.0000-9.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 9.0000-10.0000 sec 73.9 MBytes 620 Mbits/sec [ 1] 0.0000-10.0174 sec 723 MBytes 605 Mbits/sec Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03bnx2x: fix potential memory leak in bnx2x_tpa_stop()Jianglei Nie
bnx2x_tpa_stop() allocates a memory chunk from new_data with bnx2x_frag_alloc(). The new_data should be freed when gets some error. But when "pad + len > fp->rx_buf_size" is true, bnx2x_tpa_stop() returns without releasing the new_data, which will lead to a memory leak. We should free the new_data with bnx2x_frag_free() when "pad + len > fp->rx_buf_size" is true. Fixes: 07b0f00964def8af9321cfd6c4a7e84f6362f728 ("bnx2x: fix possible panic under memory stress") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03eth: lan743x: reject extts for non-pci11x1x devicesRaju Lakkaraju
Remove PTP_PF_EXTTS support for non-PCI11x1x devices since they do not support the PTP-IO Input event triggered timestamping mechanisms added Fixes: 60942c397af6 ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)") Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: prestera: acl: Add check for kmemdupJiasheng Jiang
As the kemdup could return NULL, it should be better to check the return value and return error if fails. Moreover, the return value of prestera_acl_ruleset_keymask_set() should be checked by cascade. Fixes: 604ba230902d ("net: prestera: flower template support") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Taras Chornyi<tchornyi@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: sfp: add support for multigig RollBall transceiversMarek Behún
This adds support for multigig copper SFP modules from RollBall/Hilink. These modules have a specific way to access clause 45 registers of the internal PHY. We also need to wait at least 22 seconds after deasserting TX disable before accessing the PHY. The code waits for 25 seconds just to be sure. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phy: mdio-i2c: support I2C MDIO protocol for RollBall SFP modulesMarek Behún
Some multigig SFPs from RollBall and Hilink do not expose functional MDIO access to the internal PHY of the SFP via I2C address 0x56 (although there seems to be read-only clause 22 access on this address). Instead these SFPs PHY can be accessed via I2C via the SFP Enhanced Digital Diagnostic Interface - I2C address 0x51. The SFP_PAGE has to be selected to 3 and the password must be filled with 0xff bytes for this PHY communication to work. This extends the mdio-i2c driver to support this protocol by adding a special parameter to mdio_i2c_alloc function via which this RollBall protocol can be selected. Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY releaseMarek Behún
Instead of configuring the I2C mdiobus when SFP driver is probed, create/destroy the mdiobus before the PHY is probed for/after it is released. This way we can tell the mdio-i2c code which protocol to use for each SFP transceiver. Move the code that determines MDIO I2C protocol from sfp_sm_probe_for_phy() to sfp_sm_mod_probe(), where most of the SFP ID parsing is done. Don't allocate I2C bus if no PHY is expected. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: sfp: Add and use macros for SFP quirks definitionsMarek Behún
Add macros SFP_QUIRK(), SFP_QUIRK_M() and SFP_QUIRK_F() for defining SFP quirk table entries. Use them to deduplicate the code a little bit. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phylink: allow attaching phy for SFP modules on 802.3z modeMarek Behún
Some SFPs may contain an internal PHY which may in some cases want to connect with the host interface in 1000base-x/2500base-x mode. Do not fail if such PHY is being attached in one of these PHY interface modes. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Pali Rohár <pali@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phy: marvell10g: select host interface configurationRussell King
Select the host interface configuration according to the capabilities of the host if the host provided them. This is currently provided only when connecting PHY that is inside a SFP. The PHY supports several configurations of host communication: - always communicate with host in 10gbase-r, even if copper speed is lower (rate matching mode), - the same as above but use xaui/rxaui instead of 10gbase-r, - switch host SerDes mode between 10gbase-r, 5gbase-r, 2500base-x and sgmii according to copper speed, - the same as above but use xaui/rxaui instead of 10gbase-r. This mode of host communication, called MACTYPE, is by default selected by strapping pins, but it can be changed in software. This adds support for selecting this mode according to which modes are supported by the host. This allows the kernel to: - support SFP modules with 88X33X0 or 88E21X0 inside them Note: we use mv3310_select_mactype() for both 88X3310 and 88X3340, although 88X3340 does not support XAUI. This is not a problem because 88X3340 does not declare XAUI in it's supported_interfaces, and so this function will never choose that MACTYPE. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ rebase, updated, also added support for 88E21X0 ] Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phy: marvell10g: Use tabs instead of spaces for indentationMarek Behún
Some register definitions were defined with spaces used for indentation. Change them to tabs. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phylink: pass supported host PHY interface modes to phylib for SFP's PHYsMarek Behún
Pass the supported PHY interface types to phylib if the PHY we are connecting is inside a SFP, so that the PHY driver can select an appropriate host configuration mode for their interface according to the host capabilities. For example the Marvell 88X3310 PHY inside RollBall SFP modules defaults to 10gbase-r mode on host's side, and the marvell10g driver currently does not change this setting. But a host may not support 10gbase-r. For example Turris Omnia only supports sgmii, 1000base-x and 2500base-x modes. The PHY can be configured to use those modes, but in order for the PHY driver to do that, it needs to know which modes are supported. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phylink: rename phylink_sfp_config()Russell King (Oracle)
phylink_sfp_config() now only deals with configuring the MAC for a SFP containing a PHY. Rename it to be specific. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phylink: use phy_interface_t bitmaps for optical modulesRussell King
Where a MAC provides a phy_interface_t bitmap, use these bitmaps to select the operating interface mode for optical SFP modules, rather than using the linkmode bitmaps. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: sfp: augment SFP parsing with phy_interface_t bitmapRussell King
We currently parse the SFP EEPROM to a bitmap of ethtool link modes, and then attempt to convert the link modes to a PHY interface mode. While this works at present, there are cases where this is sub-optimal. For example, where a module can operate with several different PHY interface modes. To start addressing this, arrange for the SFP EEPROM parsing to also provide a bitmap of the possible PHY interface modes. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phylink: add ability to validate a set of interface modesRussell King (Oracle)
Rather than having the ability to validate all supported interface modes or a single interface mode, introduce the ability to validate a subset of supported modes. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [ rebased on current net-next ] Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03drm/i915: Round to closest in g4x+ HDMI clock readoutVille Syrjälä
On pre-ddi platforms we have slightly different code being used for HDMI TMDS clock to dotclock conversion between the state computation and state readout. Both of these need to round the same way in order to not get a mismatch between the computed and read out states. Fix up the rounding direction in the readout path to match what is used during state computation. Another option would to just use intel_crtc_dotclock() in the readout path as well, but I don't really want to do that as the current code more accurately represents how the hardware really works; The HDMI port register defines whether we're actually outputting 8bpc or 12bpc over HDMI, and the PIPECONF bpc setting just defines what goes over FDI between the CPU and PCH. The fact that we try to cram all that into a single pipe_bpp during state computation is perhaps not entirely great... Fixes: f2c9df101095 ("drm/i915: Round TMDS clock to nearest") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220926193021.23287-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 86b972ef1091882d66672399c6f8ebdd12a3b707) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-10-03PCI: qcom-ep: Make use of the cached dev pointerManivannan Sadhasivam
In the qcom_pcie_ep_get_resources() function, dev pointer is already cached in a local variable. So let's make use of it instead of getting the dev pointer again from pdev struct. Link: https://lore.kernel.org/r/20220914075350.7992-4-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-10-03PCI: qcom-ep: Rely on the clocks supplied by devicetreeManivannan Sadhasivam
Generally, device drivers should just rely on the platform data like devicetree to supply the clocks required for the functioning of the peripheral. There is no need to hardcode the clk info in the driver. So get rid of the static clk info and obtain the platform supplied clks. The total number of clocks supplied is obtained using the devm_clk_bulk_get_all() API and used for the rest of the clk_bulk_ APIs. Link: https://lore.kernel.org/r/20220914075350.7992-3-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-10-03PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structureManivannan Sadhasivam
Add kernel-doc for qcom_pcie_ep structure. Link: https://lore.kernel.org/r/20220914075350.7992-2-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-10-03phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()Richard Zhu
Refer to phy_core driver, phy_init() must be called before phy_power_on(). Fix the wrong order of phy_init() and phy_power_on() here. Link: https://lore.kernel.org/r/1662344583-18874-1-git-send-email-hongxing.zhu@nxp.com Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver") Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-10-03PCI: imx6: Add i.MX8MP PCIe supportRichard Zhu
Add i.MX8MP PCIe support. To avoid codes duplication when find the syscon regmap, add the iomux gpr syscon compatible into drvdata. Link: https://lore.kernel.org/r/1662109086-15881-8-git-send-email-hongxing.zhu@nxp.com Tested-by: Marek Vasut <marex@denx.de> Tested-by: Richard Leitner <richard.leitner@skidata.com> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-10-03PCI: dwc: Replace of_gpio_named_count() by gpiod_count()Andy Shevchenko
As a preparation to unexport of_gpio_named_count(), convert the driver to use gpiod_count() instead. Link: https://lore.kernel.org/r/20220830183310.48541-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Acked-by: Rob Herring <robh@kernel.org>
2022-10-03platform/x86: use PLATFORM_DEVID_NONE instead of -1Barnabás Pőcze
Use the `PLATFORM_DEVID_NONE` constant instead of hard-coding -1 when creating a platform device. No functional changes are intended. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Link: https://lore.kernel.org/r/20220930104857.2796923-1-pobrn@protonmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-10-03platform/x86/amd: pmc: Dump idle mask during "check" stage insteadMario Limonciello
The idle mask is dumped during the "prepare" and "restore" stage right now, which helps to demonstrate issues only related to the first s2idle entry. If the system has entered s2idle once, but was woken up never breaking the s2idle loop but also never went back to sleep we might still have another issue to deal with however. Move the dynamic debugging message here so that we'll catch it on each iteration. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216516 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220929215042.745-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-10-03net: sparx5: Fix return type of sparx5_port_xmit_implNathan Huckleberry
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of sparx5_port_xmit_impl should be changed from int to netdev_tx_t. Reported-by: Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by: Nathan Huckleberry <nhuck@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-02hwmon: (corsair-psu) add USB id of new revision of the HX1000i psuWilken Gottwalt
Also updates the documentation accordingly. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/YznOUQ7Pijedu0NW@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-10-02Merge tag 'i2c-for-6.0-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Add missing DT bindings for STM32 and a resource leak fix for DaVinci" * tag 'i2c-for-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: davinci: fix PM disable depth imbalance in davinci_i2c_probe dt-bindings: i2c: st,stm32-i2c: Document wakeup-source property dt-bindings: i2c: st,stm32-i2c: Document interrupt-names property
2022-10-02hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controllerOleksandr Shamray
Fix scale factors for reading MPS Multi-phase mp2888 controller. Fixed sensors: - PIN/POUT: based on vendor documentation, set bscale factor 0.5W/LSB - IOUT: based on vendor documentation, set scale factor 0.25 A/LSB Fixes: e4db7719d037 ("hwmon: (pmbus) Add support for MPS Multi-phase mp2888 controller") Signed-off-by: Oleksandr Shamray <oleksandrs@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20220929121642.63051-1-oleksandrs@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-10-02hwmon: (nct6683) remove unused variable in nct6683_create_attr_groupZeng Heng
When enable 'unused-but-set-variable' compile warning option, it would raise warning as below: drivers/hwmon/nct6683.c:415:9: warning: variable 'j' set but not used [-Wunused-but-set-variable] Variable 'j' in nct6683_create_attr_group is unused, so remove it and simplify the 'for' loop. Signed-off-by: Zeng Heng <zengheng4@huawei.com> Link: https://lore.kernel.org/r/20220927114352.2498079-1-zengheng4@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-10-02watchdog: sp5100_tco: Add "action" module parameterVladimir Panteleev
Allow configuring the "action" bit, as documented in [1]. Previously, the only action supported by this module was to reset the system (0). It can now be configured to power off (1) instead. [1]: https://www.amd.com/system/files/TechDocs/44413.pdf Signed-off-by: Vladimir Panteleev <git@vladimir.panteleev.md> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220920092721.7686-1-git@vladimir.panteleev.md Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx93: add watchdog timer on imx93Alice Guo
The WDOG clocks are sourced from lpo_clk, and lpo_clk is the fixed 32KHz. TOVAL contains the 16-bit value used to set the timeout period of the watchdog. When the timeout period exceeds 2 seconds, the value written to the TOVAL register is larger than 16-bit can represent. Enabling watchdog prescaler can solve this problem. Two points need to be aware of: 1. watchdog prescaler enables a fixed 256 pre-scaling of watchdog counter reference clock 2. reconfiguration takes about 55ms on imx93 Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-8-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
generated by cgit (git 2.34.1) at 2025-09-13 03:17:20 +0000