Age | Commit message (Collapse) | Author |
|
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This adds support for the 7nm ("V4") DSI PHY/PLL for sm8150 and sm8250.
Implementation is based on 10nm driver, but updated based on the downstream
7nm driver.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250)
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This allows DSI driver to work with sm8150 and sm8250. The sdm845 config
is re-used as the config is the same.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250)
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The clk_pre/clk_post values in shared_timings are used instead, and these
are unused.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250)
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Since commit 9495b7e92f71 ("driver core: platform: Initialize dma_parms
for platform devices"), struct platform_device already provides a
dma_parms structure, so we can save allocating another one.
Also the DMA segment size is simply a size, not a bitmask.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This addresses the following gcc warning with "make W=1":
drivers/gpu/drm/xlnx/zynqmp_disp.c:245:18: warning:
‘scaling_factors_666’ defined but not used [-Wunused-const-variable=]
245 | static const u32 scaling_factors_666[] = {
| ^~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910140630.1191782-1-yanaijie@huawei.com
|
|
Sync drm-intel-gt-next here so we can have an unified fixes flow.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Pull ceph fix from Ilya Dryomov:
"Add missing capability checks in rbd, marked for stable"
* tag 'ceph-for-5.9-rc5' of git://github.com/ceph/ceph-client:
rbd: require global CAP_SYS_ADMIN for mapping and unmapping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Usual driver bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: algo: pca: Reapply i2c bus settings after reset
i2c: npcm7xx: Fix timeout calculation
misc: eeprom: at24: register nvmem only after eeprom is ready to use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three pieces of documentation and add new CPU IDs to the
Intel RAPL power capping driver.
Specifics:
- Add CPU IDs of the TigerLake Desktop, RocketLake and AlderLake
chips to the Intel RAPL power capping driver (Zhang Rui).
- Add the missing energy model performance domain item to the struct
device kerneldoc comment (Randy Dunlap).
- Fix the struct powercap_control_type kerneldoc comment to match the
actual definition of that structure and add missing item to the
struct powercap_zone_ops kerneldoc comment (Amit Kucheria)"
* tag 'pm-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: make documentation reflect code
PM: <linux/device.h>: fix @em_pd kernel-doc warning
powercap/intel_rapl: add support for AlderLake
powercap/intel_rapl: add support for RocketLake
powercap/intel_rapl: add support for TigerLake Desktop
|
|
Pull block fixes from Jens Axboe:
- Fix a regression in bdev partition locking (Christoph)
- NVMe pull request from Christoph:
- cancel async events before freeing them (David Milburn)
- revert a broken race fix (James Smart)
- fix command processing during resets (Sagi Grimberg)
- Fix a kyber crash with requeued flushes (Omar)
- Fix __bio_try_merge_page() same_page error for no merging (Ritesh)
* tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block:
block: Set same_page to false in __bio_try_merge_page if ret is false
nvme-fabrics: allow to queue requests for live queues
block: only call sched requeue_request() for scheduled requests
nvme-tcp: cancel async events before freeing event struct
nvme-rdma: cancel async events before freeing event struct
nvme-fc: cancel async events before freeing event struct
nvme: Revert: Fix controller creation races with teardown flow
block: restore a specific error code in bdev_del_partition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's some driver specific fixes here plus one core fix for memory
leaks that could be triggered by a potential race condition when
cleaning up after we have split transfers to fit into what the
controller can support"
* tag 'spi-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: stm32: fix pm_runtime_get_sync() error checking
spi: Fix memory leak on splited transfers
spi: spi-cadence-quadspi: Fix mapping of buffers for DMA reads
spi: stm32: Rate-limit the 'Communication suspended' message
spi: spi-loopback-test: Fix out-of-bounds read
spi: spi-cadence-quadspi: Populate get_name() interface
MAINTAINERS: add myself as maintainer for spi-fsl-dspi driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"The biggest set of fixes here is those from Michał Mirosław fixing
some locking issues with coupled regulators that are triggered in
cases where a coupled regulator is used by a device involved in
fs_reclaim like eMMC storage.
These are relatively serious for the affected systems, though the
circumstances where they trigger are very rare"
* tag 'regulator-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: pwm: Fix machine constraints application
regulator: core: Fix slab-out-of-bounds in regulator_unlock_recursive()
regulator: remove superfluous lock in regulator_resolve_coupling()
regulator: cleanup regulator_ena_gpio_free()
regulator: plug of_node leak in regulator_register()'s error path
regulator: push allocation in set_consumer_device_supply() out of lock
regulator: push allocations in create_regulator() outside of lock
regulator: push allocation in regulator_ena_gpio_request() out of lock
regulator: push allocation in regulator_init_coupling() outside of lock
regulator: fix spelling mistake "Cant" -> "Can't"
regulator: cros-ec-regulator: Add NULL test for devm_kmemdup call
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- sdio: Restore ~20% performance drop for SDHCI drivers, by using
mmc_pre_req() and mmc_post_req() for SDIO requests.
MMC host:
- sdhci-of-esdhc: Fix support for erratum eSDHC7
- mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unset
- sdhci-msm: Use retries to fix tuning
- sdhci-acpi: Fix resume for eMMC HS400 mode"
* tag 'mmc-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdio: Use mmc_pre_req() / mmc_post_req()
mmc: sdhci-of-esdhc: Don't walk device-tree on every interrupt
mmc: mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unset
mmc: sdhci-msm: Add retries when all tuning phases are found valid
mmc: sdhci-acpi: Clear amd_sdhci_host on reset
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes, not much a major amount. One thing though is Laurent
fixed some Kconfig issues, and I'm carrying the rapidio kconfig change
so the drm one for xlnx driver works. He hadn't got a response from
rapidio maintainers.
Otherwise, virtio, sun4i, tve200, ingenic have some fixes, one audio
fix for i915 and a core docs fix.
kconfig:
- rapidio/xlnx kconfig fix
core:
- Documentation fix
i915:
- audio regression fix
virtio:
- Fix double free in virtio
- Fix virtio unblank
- Remove output->enabled from virtio, as it should use crtc_state
sun4i:
- Add missing put_device in sun4i, and other fixes
- Handle sun4i alpha on lowest plane correctly
tv200:
- Fix tve200 enable/disable
ingenic
- Small ingenic fixes"
* tag 'drm-fixes-2020-09-11' of git://anongit.freedesktop.org/drm/drm:
drm/i915: fix regression leading to display audio probe failure on GLK
drm: xlnx: dpsub: Fix DMADEVICES Kconfig dependency
rapidio: Replace 'select' DMAENGINES 'with depends on'
drm/virtio: drop virtio_gpu_output->enabled
drm/sun4i: backend: Disable alpha on the lowest plane on the A20
drm/sun4i: backend: Support alpha property on lowest plane
drm/sun4i: Fix DE2 YVU handling
drm/tve200: Stabilize enable/disable
dma-buf: fence-chain: Document missing dma_fence_chain_init() parameter in kerneldoc
dma-buf: Fix kerneldoc of dma_buf_set_name()
drm/virtio: fix unblank
Documentation: fix dma-buf.rst underline length warning
drm/sun4i: Fix dsi dcs long write function
drm/ingenic: Fix driver not probing when IPU port is missing
drm/ingenic: Fix leak of device_node pointer
drm/sun4i: add missing put_device() call in sun8i_r40_tcon_tv_set_mux()
drm/virtio: Revert "drm/virtio: Call the right shmem helpers"
|
|
Pull rdma fixes from Jason Gunthorpe:
"A number of driver bug fixes and a few recent regressions:
- Several bug fixes for bnxt_re. Crashing, incorrect data reported,
and corruption on new HW
- Memory leak and crash in rxe
- Fix sysfs corruption in rxe if the netdev name is too long
- Fix a crash on error unwind in the new cq_pool code
- Fix kobject panics in rtrs by working device lifetime properly
- Fix a data corruption bug in iser target related to misaligned
buffers"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/isert: Fix unaligned immediate-data handling
RDMA/rtrs-srv: Set .release function for rtrs srv device during device init
RDMA/bnxt_re: Remove set but not used variable 'qplib_ctx'
RDMA/core: Fix reported speed and width
RDMA/core: Fix unsafe linked list traversal after failing to allocate CQ
RDMA/bnxt_re: Remove the qp from list only if the qp destroy succeeds
RDMA/bnxt_re: Fix driver crash on unaligned PSN entry address
RDMA/bnxt_re: Restrict the max_gids to 256
RDMA/bnxt_re: Static NQ depth allocation
RDMA/bnxt_re: Fix the qp table indexing
RDMA/bnxt_re: Do not report transparent vlan from QP1
RDMA/mlx4: Read pkey table length instead of hardcoded value
RDMA/rxe: Fix panic when calling kmem_cache_create()
RDMA/rxe: Fix memleak in rxe_mem_init_user
RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars
RDMA/rtrs-srv: Replace device_register with device_initialize and device_add
|
|
There's no real reason to stash away the DPIO PHY IOSF sideband port
numbers for VLV/CHV. Just compute them at runtime in the sideband code.
Gets rid of the oddball intel_init_dpio() function from the high level
init flow.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907162709.29579-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
The Amlogic D-PHY in the Amlogic AXG SoC Family does support a frequency
higher than 10MHz for the TX Escape Clock, thus make the target rate
configurable.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904125531.15248-1-narmstrong@baylibre.com
|
|
kmemdup can be used instead of kmalloc+memcpy. Replace an occurrence of
this pattern.
Issue identified with Coccinelle.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909190213.156302-1-alex.dewar90@gmail.com
|
|
It's not supported to specify more than one of those flags.
So it never made sense to make this a flag in the first place.
Nuke the flags and specify directly which memory type to use.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389826/?series=81551&rev=1
|
|
Setting more than one placement flag is illegal.
Fix this by using the current flags.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389824/?series=81551&rev=1
|
|
Those are going to be removed, stop using them here.
Instead use the GEM flags from the UAPI.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389825/?series=81551&rev=1
|
|
Those are going to be removed, stop using them here.
Instead define separate flags for the helper.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389823/?series=81551&rev=1
|
|
Logically part of the display restore.
Note: This has been in place since the introduction of gmbus
support. The gmbus code also does the resets before transfers. Is this
really needed, or a historical accident?
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910095227.9466-3-jani.nikula@intel.com
|
|
Logically part of the display save/restore. No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910095227.9466-2-jani.nikula@intel.com
|
|
Disable all display feature flags when there are no pipes i.e. there is
no display. This should help with not having to additionally check for
HAS_DISPLAY() when a feature flag check would suffice.
Also disable modeset and atomic driver features.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910095227.9466-1-jani.nikula@intel.com
|
|
Clang warns:
drivers/gpu/drm/vc4/vc4_plane.c:901:27: warning: operator '?:' has lower
precedence than '|'; '|' will be evaluated first
[-Wbitwise-conditional-parentheses]
fb->format->has_alpha ?
~~~~~~~~~~~~~~~~~~~~~ ^
drivers/gpu/drm/vc4/vc4_plane.c:901:27: note: place parentheses around
the '|' expression to silence this warning
fb->format->has_alpha ?
~~~~~~~~~~~~~~~~~~~~~ ^
drivers/gpu/drm/vc4/vc4_plane.c:901:27: note: place parentheses around
the '?:' expression to evaluate it first
fb->format->has_alpha ?
~~~~~~~~~~~~~~~~~~~~~~^
1 warning generated.
Add the parentheses as that was clearly intended, otherwise
SCALER5_CTL2_ALPHA_PREMULT won't be added to the list.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1150
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910171831.4112580-1-natechancellor@gmail.com
|
|
Clang warns 100+ times in the vc4 driver along the lines of:
drivers/gpu/drm/vc4/vc4_hdmi_phy.c:518:13: warning: implicit conversion
from enumeration type 'enum vc4_hdmi_field' to different enumeration
type 'enum vc4_hdmi_regs' [-Wenum-conversion]
HDMI_WRITE(HDMI_TX_PHY_POWERDOWN_CTL,
~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
The HDMI_READ and HDMI_WRITE macros pass in enumerators of type
vc4_hdmi_field but vc4_hdmi_write and vc4_hdmi_read expect a enumerator
of type vc4_hdmi_regs, causing a warning for every instance of this.
Update the parameter type so there is no more mismatch.
Fixes: 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1149
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910170401.3857250-1-natechancellor@gmail.com
|
|
This function always return '0' and no callers use the return value. So
make it a void function.
This eliminates the following coccicheck warning:
drivers/gpu/drm/i810/i810_dma.c:860:8-11: Unneeded variable: "ret".
Return "0" on line 885
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910140610.1191578-1-yanaijie@huawei.com
|
|
Gets rid of drmm_add_final_kfree, which I want to unexport so that it
stops confusion people about this transitional state of rolling drm
managed memory out.
This also fixes the missing drm_dev_put in the error path of the probe
code.
v2: Drop the misplaced drm_dev_put from zynqmp_dpsub_drm_init (all
other paths leaked on error, this should have been in
zynqmp_dpsub_probe), now that subsumed by the auto-cleanup of
devm_drm_dev_alloc.
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200907082225.150837-1-daniel.vetter@ffwll.ch
|
|
This means we also need to slightly restructure the exit code, so that
final cleanup of the drm_device is triggered by unregistering the
platform device. Note that devres is both clean up when the driver is
unbound (not the case for vkms, we don't bind), and also when unregistering
the device (very much the case for vkms). Therefore we can rely on devres
even though vkms isn't a proper platform device driver.
This also somewhat untangles the load code, since the drm and platform device
setup are no longer interleaved, but two distinct steps.
v2: use devres_open/release_group so we can use devm without real
hacks in the driver core or having to create an entire fake bus for
testing drivers. Might want to extract this into helpers eventually,
maybe as a mock_drm_dev_alloc or test_drm_dev_alloc.
v3: Only deref vkms_device after checking it (Melissa)
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909091833.440548-1-daniel.vetter@ffwll.ch
|
|
This means we also need to slightly restructure the exit code, so that
final cleanup of the drm_device is triggered by unregistering the
platform device. Note that devres is both clean up when the driver is
unbound (not the case for vgem, we don't bind), and also when unregistering
the device (very much the case for vgem). Therefore we can rely on devres
even though vgem isn't a proper platform device driver.
This also somewhat untangles the load code, since the drm and platform device
setup are no longer interleaved, but two distinct steps.
v2: use devres_open/release_group so we can use devm without real
hacks in the driver core or having to create an entire fake bus for
testing drivers. Might want to extract this into helpers eventually,
maybe as a mock_drm_dev_alloc or test_drm_dev_alloc.
v3: Fix error code handling (Melissa)
Cc: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909120745.716178-1-daniel.vetter@ffwll.ch
|
|
Since aspeed doesn't use devm_kzalloc anymore we can use the managed
mode config cleanup.
v2: Keep call order as suggested by Sam.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200904143941.110665-4-daniel.vetter@ffwll.ch
|
|
Upcasting using a container_of macro is more typesafe, faster and
easier for the compiler to optimize.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904143941.110665-3-daniel.vetter@ffwll.ch
|
|
Also remove the now no longer needed build bug on since that's already
not needed anymore with drmm_add_final_kfree. Conversion to managed
drm_device cleanup is easy, the final drm_dev_put() is already the
last thing in both the bind unbind as in the unbind flow.
Also, this relies on component.c correctly wrapping bind&unbind in
separate devres groups, which it does.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904143941.110665-2-daniel.vetter@ffwll.ch
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.9-rc5:
- Fix double free in virtio.
- Add missing put_device in sun4i, and other fixes.
- Small ingenic fixes.
- Handle sun4i alpha on lowest plane correctly.
- Remove output->enabled from virtio, as it should use crtc_state.
- Fix tve200 enable/disable.
- Documentation fix.
- Fix virtio unblank.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/478b49d1-b1b3-c983-7056-8a89249be435@mblankhorst.nl
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.9-rc5:
- Fix regression leading to audio probe failure
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/875z8m2hss.fsf@intel.com
|
|
Add intel_rapl support for the AlderLake platform.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add intel_rapl support for the RocketLake platform.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add intel_rapl support for the TigerLake desktop platform.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On non-EFI systems, it wasn't possible to test the platform firmware
loader because it will have never set "checked_fw" during __init.
Instead, allow the test code to override this check. Additionally split
the declarations into a private symbol namespace so there is greater
enforcement of the symbol visibility.
Fixes: 548193cba2a7 ("test_firmware: add support for firmware_request_platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200909225354.3118328-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This function should be an int, not a bool.
Presumably because we had the same 2 reverts in a slightly different
way, git got confused.
Thanks to Dan for reporting. :)
The conflict is between the 3 reverts in drm-fixes:
4993a8a37808 ("Revert "drm/i915: Remove i915_gem_object_get_dirty_page()"")
ad5d95e4d538 ("Revert "drm/i915/gem: Async GPU relocations only"")
20561da3a2e1 ("Revert "drm/i915/gem: Delete unused code"")
And the slightly different combined revert in drm-intel-gt-next, but
with the same goal:
102a0a9051f4 ("Revert "drm/i915/gem: Async GPU relocations only"")
In the merge commit 1f4b2aca794f ("Merge tag
'drm-intel-gt-next-2020-09-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next") things
went wrong, but the merge commit view now doesn't show any conflict
anymore (as git tends to do when the resolution picks one or the other
branch).
The need to handle other than just true/false error codes in
__reloc_entry_gpu was added in the dma_resv locking changes in
c43ce12328df ("drm/i915: Use per object locking in execbuf, v12.")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dave Airlie <airlied@redhat.com>
[danvet: Explain this entire saga a lot better, adding tons of commit
references. Also note that this was merged before full intel-gfx-CI
results, only after BAT, since the breakage at the BAT run is already
severe enough to block all pre-merge testing.]
Fixes: 1f4b2aca794f ("Merge tag 'drm-intel-gt-next-2020-09-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next")
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910111225.2184193-1-maarten.lankhorst@linux.intel.com
|
|
The GPU 'CONFIG' registers used to work around hardware issues are
cleared on reset so need to be programmed every time the GPU is reset.
However panfrost_device_reset() failed to do this.
To avoid this in future instead move the call to
panfrost_gpu_init_quirks() to panfrost_gpu_power_on() so that the
regsiters are always programmed just before the cores are powered.
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909122957.51667-1-steven.price@arm.com
|
|
Since all we do with scatterlists is map them in the MMU, we don't have
any hardware constraints on how they're laid out. Let the DMA layer know
so it won't warn when DMA API debugging is enabled.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/04371bc36512076b7feee07f854e56b80675d953.1599141563.git.robin.murphy@arm.com
|
|
The devm_ioremap() function never returns error pointers, it returns
NULL.
Fixes: 8323989140f3 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910100825.GC79916@mwanda
|
|
The variant->registers[] has ->num_registers elements so the >
comparison needs to be changes to >= to prevent an out of bounds
access.
Fixes: 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910100748.GA79916@mwanda
|
|
When compiling for 32bit platforms, the compilation fails with:
ERROR: modpost: "__aeabi_ldivmod"
[drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
ERROR: modpost: "__aeabi_uldivmod"
[drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
This patch adds a dependency on ARM64 since no 32bit SoCs have DCSS, so far.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reported-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910095250.7663-1-laurentiu.palcu@oss.nxp.com
|
|
On MMIO a new set of registers is defined for finding SHM
regions. Add their definitions and use them to find the region.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cc: kvm@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
On PCI the shm regions are found using capability entries;
find a region by searching for the capability.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: kvm@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Kbuild warns when this file is built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/gpu/drm/panel/panel-samsung-s6e63m0.o
Add the missing license/author/description tags.
Fixes: b7b23e447687 ("drm/panel: s6e63m0: Break out SPI transport")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909134137.32284-1-yuehaibing@huawei.com
|