summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-11-22drm/amd/powerplay: correct fine grained dpm force level settingEvan Quan
For fine grained dpm, there is only two levels supported. However to reflect correctly the current clock frequency, there is an intermediate level faked. Thus on forcing level setting, we need to treat level 2 correctly as level 1. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amd/powerplay: issue no PPSMC_MSG_GetCurrPkgPwr on unsupported ASICsEvan Quan
Otherwise, the error message prompted will confuse user. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amd/powerplay: issue BTC on Navi during SMU setupEvan Quan
RunBTC is added for Navi ASIC on hardware setup. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amd/powerplay: avoid DPM reenable process on Navi1x ASICs V2Evan Quan
Otherwise, without RLC reinitialization, the DPM reenablement will fail. That affects the custom pptable uploading. V2: setting/clearing uploading_custom_pp_table in smu_sys_set_pp_table() Reported-by: Matt Coffin <mcoffin13@gmail.com> Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Matt Coffin <mcoffin13@gmail.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu/gfx10: fix mqd backup/restore for gfx rings (v2)Xiaojie Yuan
1. no need to allocate an extra member for 'mqd_backup' array 2. backup/restore mqd to/from the correct 'mqd_backup' array slot v2: warning fix (Alex) Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22net: dsa: ocelot: fix "should it be static?" warningsChen Wandun
Fix following sparse warnings: drivers/net/dsa/ocelot/felix.c:351:6: warning: symbol 'felix_txtstamp' was not declared. Should it be static? Signed-off-by: Chen Wandun <chenwandun@huawei.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22r8152: avoid to call napi_disable twiceHayes Wang
Call napi_disable() twice would cause dead lock. There are three situations may result in the issue. 1. rtl8152_pre_reset() and set_carrier() are run at the same time. 2. Call rtl8152_set_tunable() after rtl8152_close(). 3. Call rtl8152_set_ringparam() after rtl8152_close(). For #1, use the same solution as commit 84811412464d ("r8152: Re-order napi_disable in rtl8152_close"). For #2 and #3, add checking the flag of IFF_UP and using napi_disable/napi_enable during mutex. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22Merge tag 'drm-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Two sets of fixes in here, one for amdgpu, and one for i915. The amdgpu ones are pretty small, i915's CI system seems to have a few problems in the last week or so, there is one major regression fix for fb_mmap, but there are a bunch of other issues fixed in there as well, oops, screen flashes and rcu related. amdgpu: - Remove experimental flag for navi14 - Fix confusing power message failures on older VI parts - Hang fix for gfxoff when using the read register interface - Two stability regression fixes for Raven i915: - Fix kernel oops on dumb_create ioctl on no crtc situation - Fix bad ugly colored flash on VLV/CHV related to gamma LUT update - Fix unity of the frequencies reported on PMU - Fix kernel oops on set_page_dirty using better locks around it - Protect the request pointer with RCU to prevent it being freed while we might need still - Make pool objects read-only - Restore physical addresses for fb_map to avoid corrupted page table" * tag 'drm-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drm: drm/i915/fbdev: Restore physical addresses for fb_mmap() Revert "drm/amd/display: enable S/G for RAVEN chip" drm/amdgpu: disable gfxoff on original raven drm/amdgpu: disable gfxoff when using register read interface drm/amd/powerplay: correct fine grained dpm force level setting drm/amd/powerplay: issue no PPSMC_MSG_GetCurrPkgPwr on unsupported ASICs drm/amdgpu: remove experimental flag for Navi14 drm/i915: make pool objects read-only drm/i915: Protect request peeking with RCU drm/i915/userptr: Try to acquire the page lock around set_page_dirty() drm/i915/pmu: "Frequency" is reported as accumulated cycles drm/i915: Preload LUTs if the hw isn't currently using them drm/i915: Don't oops in dumb_create ioctl if we have no crtcs
2019-11-22clk: ingenic: Allow drivers to be built with COMPILE_TESTStephen Boyd
We don't need the MIPS architecture or even a MIPS compiler to compile test these drivers. Let's add a COMPILE_TEST possibility on the menuconfig here so that we can build these drivers on more configurations. Cc: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20191114001925.159276-1-sboyd@kernel.org Reviewed-by: Paul Cercueil <paul@crapouillou.net>
2019-11-22IB/mlx5: Implement callbacks for getting VFs GUID attributesDanit Goldberg
Implement the IB defined callback mlx5_ib_get_vf_guid used to query FW for VFs attributes and return node and port GUIDs. Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-11-22IB/ipoib: Add ndo operation for getting VFs GUID attributesDanit Goldberg
Add ndo operation to the network driver that enables configuring ipoib_get_vf_guid operation. The operation allows to get a VF port and node GUIDs. Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-11-22IB/core: Add interfaces to get VF node and port GUIDsDanit Goldberg
Provide ability to get node and port GUIDs of VFs to be symmetrical to already existing set option. Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-11-22Revert "drm/i915/gt: Wait for new requests in intel_gt_retire_requests()"Chris Wilson
From inside an active timeline in the execbuf ioctl, we may try to reclaim some space in the GGTT. We need GGTT space for all objects on !full-ppgtt platforms, and for context images everywhere. However, to free up space in the GGTT we may need to remove some pinned objects (e.g. context images) that require flushing the idle barriers to remove. For this we use the big hammer of intel_gt_wait_for_idle() However, commit 7936a22dd466 ("drm/i915/gt: Wait for new requests in intel_gt_retire_requests()") will continue spinning on the wait if a timeline is active but lacks requests, as is the case during execbuf reservation. Spinning forever is quite time consuming, so revert that commit and start again. In practice, the effect commit 7936a22dd466 was trying to achieve is accomplished by commit 1683d24c1470 ("drm/i915/gt: Move new timelines to the end of active_list"), so there is no immediate rush to replace the looping. Testcase: igt/gem_exec_reloc/basic-range Fixes: a46bfdc83fee ("drm/i915/gt: Wait for new requests in intel_gt_retire_requests()") References: 1683d24c1470 ("drm/i915/gt: Move new timelines to the end of active_list") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191121071044.97798-1-chris@chris-wilson.co.uk (cherry picked from commit 689122dcc36e08f53732adf7ae0246f62eff3eb6) [Joonas: Corrected Fixes: tag ref to match drm-intel-next-fixes] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-22can: m_can_platform: remove unnecessary m_can_class_resume() callPankaj Sharma
The function m_can_runtime_resume() is getting recursively called from m_can_class_resume(). This results in a lock up. We need not call m_can_class_resume() during m_can_runtime_resume(). Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com> Signed-off-by: Sriram Dash <sriram.dash@samsung.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-22can: m_can_platform: set net_device structure as driver dataPankaj Sharma
The current code is failing during clock prepare enable because of not getting proper clock from platform device. [ 0.852089] Call trace: [ 0.854516] 0xffff0000fa22a668 [ 0.857638] clk_prepare+0x20/0x34 [ 0.861019] m_can_runtime_resume+0x2c/0xe4 [ 0.865180] pm_generic_runtime_resume+0x28/0x38 [ 0.869770] __rpm_callback+0x16c/0x1bc [ 0.873583] rpm_callback+0x24/0x78 [ 0.877050] rpm_resume+0x428/0x560 [ 0.880517] __pm_runtime_resume+0x7c/0xa8 [ 0.884593] m_can_clk_start.isra.9.part.10+0x1c/0xa8 [ 0.889618] m_can_class_register+0x138/0x370 [ 0.893950] m_can_plat_probe+0x120/0x170 [ 0.897939] platform_drv_probe+0x4c/0xa0 [ 0.901924] really_probe+0xd8/0x31c [ 0.905477] driver_probe_device+0x58/0xe8 [ 0.909551] device_driver_attach+0x68/0x70 [ 0.913711] __driver_attach+0x9c/0xf8 [ 0.917437] bus_for_each_dev+0x50/0xa0 [ 0.921251] driver_attach+0x20/0x28 [ 0.924804] bus_add_driver+0x148/0x1fc [ 0.928617] driver_register+0x6c/0x124 [ 0.932431] __platform_driver_register+0x48/0x50 [ 0.937113] m_can_plat_driver_init+0x18/0x20 [ 0.941446] do_one_initcall+0x4c/0x19c [ 0.945259] kernel_init_freeable+0x1d0/0x280 [ 0.949591] kernel_init+0x10/0x100 [ 0.953057] ret_from_fork+0x10/0x18 [ 0.956614] Code: 00000000 00000000 00000000 00000000 (fa22a668) [ 0.962681] ---[ end trace 881f71bd609de763 ]--- [ 0.967301] Kernel panic - not syncing: Attempted to kill init! A device driver for CAN controller hardware registers itself with the Linux network layer as a network device. So, the driver data for m_can should ideally be of type net_device. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com> Signed-off-by: Sriram Dash <sriram.dash@samsung.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-22gpio: Add TODO item for regmap helperLinus Walleij
Add a TODO item for a generic MMIO regmap helper. Suggested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-22gpio: of: Fix bogus reference to gpiod_get_count()Geert Uytterhoeven
The recommended function is called gpiod_count(), not gpiod_get_count(). Fixes: f626d6dfb7098525 ("gpio: of: Break out OF-only code") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191120154521.16273-1-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-22gpiolib: Grammar s/manager/managed/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191120143745.1254-1-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-22virt_wifi: fix use-after-free in virt_wifi_newlink()Taehee Yoo
When virt_wifi interface is created, virt_wifi_newlink() is called and it calls register_netdevice(). if register_netdevice() fails, it internally would call ->priv_destructor(), which is virt_wifi_net_device_destructor() and it frees netdev. but virt_wifi_newlink() still use netdev. So, use-after-free would occur in virt_wifi_newlink(). Test commands: ip link add dummy0 type dummy modprobe bonding ip link add bonding_masters link dummy0 type virt_wifi Splat looks like: [ 202.220554] BUG: KASAN: use-after-free in virt_wifi_newlink+0x88b/0x9a0 [virt_wifi] [ 202.221659] Read of size 8 at addr ffff888061629cb8 by task ip/852 [ 202.222896] CPU: 1 PID: 852 Comm: ip Not tainted 5.4.0-rc5 #3 [ 202.223765] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 202.225073] Call Trace: [ 202.225532] dump_stack+0x7c/0xbb [ 202.226869] print_address_description.constprop.5+0x1be/0x360 [ 202.229362] __kasan_report+0x12a/0x16f [ 202.230714] kasan_report+0xe/0x20 [ 202.232595] virt_wifi_newlink+0x88b/0x9a0 [virt_wifi] [ 202.233370] __rtnl_newlink+0xb9f/0x11b0 [ 202.244909] rtnl_newlink+0x65/0x90 [ ... ] Cc: stable@vger.kernel.org Fixes: c7cdba31ed8b ("mac80211-next: rtnetlink wifi simulation device") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20191121122645.9355-1-ap420073@gmail.com [trim stack dump a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-11-22Bluetooth: btbcm: Use the BDADDR_PROPERTY quirkAndre Heider
Some devices ship with the controller default address, like the Orange Pi 3 (BCM4345C5). Allow the bootloader to set a valid address through the device tree. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-11-22crypto: vmx - Avoid weird build failuresMichael Ellerman
In the vmx crypto Makefile we assign to a variable called TARGET and pass that to the aesp8-ppc.pl and ghashp8-ppc.pl scripts. The variable is meant to describe what flavour of powerpc we're building for, eg. either 32 or 64-bit, and big or little endian. Unfortunately TARGET is a fairly common name for a make variable, and if it happens that TARGET is specified as a command line parameter to make, the value specified on the command line will override our value. In particular this can happen if the kernel Makefile is driven by an external Makefile that uses TARGET for something. This leads to weird build failures, eg: nonsense at /build/linux/drivers/crypto/vmx/ghashp8-ppc.pl line 45. /linux/drivers/crypto/vmx/Makefile:20: recipe for target 'drivers/crypto/vmx/ghashp8-ppc.S' failed Which shows that we passed an empty value for $(TARGET) to the perl script, confirmed with make V=1: perl /linux/drivers/crypto/vmx/ghashp8-ppc.pl > drivers/crypto/vmx/ghashp8-ppc.S We can avoid this confusion by using override, to tell make that we don't want anything to override our variable, even a value specified on the command line. We can also use a less common name, given the script calls it "flavour", let's use that. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: amlogic - enable working on big endian kernelCorentin Labbe
On big endian kernel, the GXL crypto driver does not works. This patch do the necessary modification to permit it to work on BE kernel (removing bitfield and adds some cpu_to_le32). Fixes: 48fe583fe541 ("crypto: amlogic - Add crypto accelerator for amlogic GXL") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun8i-ce - enable working on big endianCorentin Labbe
On big endian kernel, the sun8i-ce crypto driver does not works. This patch do the necessary modification to permit it to work on BE kernel (setting descriptor entries as __le32 and adding some cpu_to_le32) Fixes: 06f751b61329 ("crypto: allwinner - Add sun8i-ce Crypto Engine") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22hwrng: ks-sa - Enable COMPILE_TESTHerbert Xu
This patch enables COMPILE_TEST on the ks-sa-rng driver. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: atmel-aes - Change data type for "lastc" bufferTudor Ambarus
In case of in-place decryption, the "lastc" buffer is used to copy the last ciphertext block before the decryption of the message. It is later used to update the req->iv of the skcipher_request. "lastc" variable is not used to interact with the hardware, there is no restriction to be of type "u32". Change the type of "lastc" to "u8". Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: atmel-tdes - Set the IV after {en,de}cryptTudor Ambarus
The req->iv of the skcipher_request is expected to contain the last ciphertext block when the {en,de}crypt operation is done. In case of in-place decryption, copy the ciphertext in an intermediate buffer before decryption. This fixes the following tcrypt tests: alg: skcipher: atmel-cbc-des encryption test failed (wrong output IV) on test vector 0, cfg="in-place" 00000000: fe dc ba 98 76 54 32 10 alg: skcipher: atmel-cbc-tdes encryption test failed (wrong output IV) on test vector 0, cfg="in-place" 00000000: 7d 33 88 93 0f 93 b2 42 Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun4i-ss - fix big endian issuesCorentin Labbe
When testing BigEndian kernel, the sun4i-ss was failling all crypto tests. This patch fix endian issues with it. Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun4i-ss - hide the Invalid keylen messageCorentin Labbe
Drop the "Invalid keylen" message to debug level, it adds no value, and when CRYPTO_EXTRA_TEST is enabled, it floods the console. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun4i-ss - use crypto_ahash_digestsizeCorentin Labbe
The size of the digest is different between MD5 and SHA1 so instead of using the higher value (5 words), let's use crypto_ahash_digestsize(). Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun4i-ss - remove dependency on not 64BITCorentin Labbe
The driver now compile without warnings on 64bits, we can remove the !64BIT condition. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.cCorentin Labbe
If you try to compile this driver on a 64-bit platform then you will get warnings because it mixes size_t with unsigned int which only works on 32-bit. This patch fixes all of the warnings on sun4i-ss-hash.c. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: hisilicon - add DebugFS for HiSilicon SECZaibo Xu
The HiSilicon SEC engine driver uses DebugFS to provide main debug information for user space. Signed-off-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: hisilicon - add SRIOV for HiSilicon SECZaibo Xu
HiSilicon SEC engine supports PCI SRIOV. This patch enable this feature. User can enable VFs and pass through them to VM, same SEC driver can work in VM to provide skcipher algorithms. Signed-off-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: hisilicon - add HiSilicon SEC V2 driverZaibo Xu
SEC driver provides PCIe hardware device initiation with AES, SM4, and 3DES skcipher algorithms registered to Crypto. It uses Hisilicon QM as interface to CPU. Signed-off-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: atmel - Fix build error of CRYPTO_AUTHENCYueHaibing
If CRYPTO_DEV_ATMEL_AUTHENC is m, CRYPTO_DEV_ATMEL_SHA is m, but CRYPTO_DEV_ATMEL_AES is y, building will fail: drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_init_tfm': atmel-aes.c:(.text+0x670): undefined reference to `atmel_sha_authenc_get_reqsize' atmel-aes.c:(.text+0x67a): undefined reference to `atmel_sha_authenc_spawn' drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_setkey': atmel-aes.c:(.text+0x7e5): undefined reference to `atmel_sha_authenc_setkey' Make CRYPTO_DEV_ATMEL_AUTHENC depend on CRYPTO_DEV_ATMEL_AES, and select CRYPTO_DEV_ATMEL_SHA and CRYPTO_AUTHENC for it under there. Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Herbert Xu <herbert@gondor.apana.org.au> Fixes: 89a82ef87e01 ("crypto: atmel-authenc - add support to...") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: qce/dma - Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: ccp - add SEV command privilege separationBrijesh Singh
Currently, there is no privilege separation of the SEV command; you can run them all or none of them. This is less than ideal because it means that a compromise of the code which launches VMs could make permanent change to the SEV certifcate chain which will affect others. These commands are required to attest the VM environment: - SEV_PDH_CERT_EXPORT - SEV_PLATFORM_STATUS - SEV_GET_{ID,ID2} These commands manage the SEV certificate chain: - SEV_PEK_CERR_IMPORT - SEV_FACTORY_RESET - SEV_PEK_GEN - SEV_PEK_CSR - SEV_PDH_GEN Lets add the CAP_SYS_ADMIN check for the group of the commands which alters the SEV certificate chain to provide some level of privilege separation. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Gary Hook <gary.hook@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: Tom Lendacky <Thomas.Lendacky@amd.com> Tested-by: David Rientjes <rientjes@google.com> Co-developed-by: David Rientjes <rientjes@google.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun8i-ce - Fix memdup.cocci warningsYueHaibing
Use kmemdup rather than duplicating its implementation Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun4i-ss - Fix 64-bit size_t warningsHerbert Xu
If you try to compile this driver on a 64-bit platform then you will get warnings because it mixes size_t with unsigned int which only works on 32-bit. This patch fixes all of the warnings. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22staging: vchiq: Have vchiq_dump_* functions return an error codeMarcelo Diop-Gonzalez
These functions currently modify the struct dump_context passed to them, and set context->actual to -EFAULT in case of error. The issue is that this is never returned to the user (except accidentally when things align so that that happens). So, have these functions return 0 on success and the appropriate error code otherwise, and return nonzero errors to the user. Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcelo Diop-Gonzalez <marcgonzalez@google.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20191120202102.249121-5-marcgonzalez@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22staging: vchiq: Refactor indentation in vchiq_dump_* functionsMarcelo Diop-Gonzalez
Doing this helps with readability, and makes the logic easier to follow. Signed-off-by: Marcelo Diop-Gonzalez <marcgonzalez@google.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20191120202102.249121-4-marcgonzalez@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22of: property: Add device link support for interrupt-parent, dmas and -gpio(s)Saravana Kannan
Add support for creating device links out of more DT properties. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191120071302.227777-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22staging: fwserial: Fix Kconfig indentation (seven spaces)Krzysztof Kozlowski
Adjust indentation from seven spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191121132851.29072-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22staging: vchiq_dump: Replace min with min_tMarcelo Diop-Gonzalez
Replacing this fixes checkpatch warnings. Signed-off-by: Marcelo Diop-Gonzalez <marcgonzalez@google.com> Link: https://lore.kernel.org/r/20191120202102.249121-3-marcgonzalez@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22staging: vchiq: Fix block comment format in vchiq_dump()Marcelo Diop-Gonzalez
This fixes a checkpatch warning. Signed-off-by: Marcelo Diop-Gonzalez <marcgonzalez@google.com> Link: https://lore.kernel.org/r/20191120202102.249121-2-marcgonzalez@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22staging: octeon: indent with tabs instead of spacesGiovanni Gherdovich
Remove a coding style error from the Octeon driver's tree and keep checkpatch.pl a little quieter. Being a white-spaces patch the chances of breakage are minimal; we don't have the hardware to run this driver so we built it with COMPILE_TEST enabled on an x86 machine. Signed-off-by: Giovanni Gherdovich <bobdc9664@seznam.cz> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20191118183852.3699-1-bobdc9664@seznam.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding errorBernd Porr
The userspace comedilib function 'get_cmd_generic_timed' fills the cmd structure with an informed guess and then calls the function 'usbduxfast_ai_cmdtest' in this driver repeatedly while 'usbduxfast_ai_cmdtest' is modifying the cmd struct until it no longer changes. However, because of rounding errors this never converged because 'steps = (cmd->convert_arg * 30) / 1000' and then back to 'cmd->convert_arg = (steps * 1000) / 30' won't be the same because of rounding errors. 'Steps' should only be converted back to the 'convert_arg' if 'steps' has actually been modified. In addition the case of steps being 0 wasn't checked which is also now done. Signed-off-by: Bernd Porr <mail@berndporr.me.uk> Cc: <stable@vger.kernel.org> # 4.4+ Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20191118230759.1727-1-mail@berndporr.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22EDAC/altera: Use the Altera System Manager driverThor Thayer
Simplify by using the Altera System Manager driver that abstracts the differences between ARM32 and ARM64. Also allows the removal of the Arria10 test function since this is handled by the System Manager driver. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Meng.Li@windriver.com Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1574361048-17572-4-git-send-email-thor.thayer@linux.intel.com
2019-11-22EDAC/altera: Cleanup the ECC ManagerThor Thayer
Cleanup the ECC Manager peripheral test in probe function as suggested by James. Remove the check for Stratix10. Suggested-by: James Morse <james.morse@arm.com> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1573156890-26891-2-git-send-email-thor.thayer@linux.intel.com
2019-11-22EDAC/altera: Use fast register IO for S10 IRQsMeng Li
When an IRQ occurs, regmap_{read,write,...}() is invoked in atomic context. Regmap must indicate register IO is fast so that a spinlock is used instead of a mutex to avoid sleeping in atomic context: lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_write a10_eccmgr_irq_unmask unmask_irq.part.0 irq_enable __irq_startup irq_startup __setup_irq request_threaded_irq devm_request_threaded_irq altr_sdram_probe Mark it so. [ bp: Massage. ] Fixes: 3dab6bd52687 ("EDAC, altera: Add support for Stratix10 SDRAM EDAC") Reported-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: stable <stable@vger.kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1574361048-17572-2-git-send-email-thor.thayer@linux.intel.com
generated by cgit (git 2.34.1) at 2025-09-29 04:46:55 +0000