summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-02-26scsi: sd: Optimal I/O size should be a multiple of physical block sizeMartin K. Petersen
It was reported that some devices report an OPTIMAL TRANSFER LENGTH of 0xFFFF blocks. That looks bogus, especially for a device with a 4096-byte physical block size. Ignore OPTIMAL TRANSFER LENGTH if it is not a multiple of the device's reported physical block size. To make the sanity checking conditionals more readable--and to facilitate printing warnings--relocate the checking to a helper function. No functional change aside from the printks. Cc: <stable@vger.kernel.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199759 Reported-by: Christoph Anton Mitterer <calestyo@scientia.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-26ath9k: remove set but not used variable 'acq'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/ath/ath9k/recv.c: In function 'ath_rx_count_airtime': drivers/net/wireless/ath/ath9k/recv.c:1010:18: warning: variable 'acq' set but not used [-Wunused-but-set-variable] It's not used after 89cea7493a34 ("ath9k: Switch to mac80211 TXQ scheduling and airtime APIs"). Also remove related variables. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath9k: debugfs: Fix SPUR-DOWN fieldAndrea Greco
SPUR DOWN field returns spurup instead of spurdown. Signed-off-by: Andrea Greco <a.greco@4sigma.it> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath9k: Make sure to zero status.tx_time before reporting TX statusToke Høiland-Jørgensen
Since ath9k reports airtime usage directly using the ieee80211_report_airtime() callback, it shouldn't also report it using the tx_time in status. Make sure the field is zeroed before TX status is reported to avoid spurious airtime being accounted by bits being left over from earlier uses of the cb. Fixes: 89cea7493a34 ("ath9k: Switch to mac80211 TXQ scheduling and airtime APIs") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: update the max num of peers supported for WCN3990Abhishek Ambure
WCN3990 firmware versions WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1 & onwards supports maximum 33 peers including self peer. To support maximum peers, send updated peer param to firmware during initialization. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by: Abhishek Ambure <aambure@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: remove the calibration data fetch for sdioWen Gong
The calibration data fetch will trigger sdio error, then sdio will become fail untill reboot system. If happens when run ifconfig wlan down, then ifconfig wlan up will fail untill reboot system.Remove it fix the ifconfig wlan issue. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00005-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: Fix length of wmi tlv command for protected mgmt framesSurabhi Vishnoi
The length of wmi tlv command for management tx send is calculated incorrectly in case of protected management frames as there is addition of IEEE80211_CCMP_MIC_LEN twice. This leads to improper behaviour of firmware as the wmi tlv mgmt tx send command for protected mgmt frames is formed wrongly. Fix the length calculation of wmi tlv command for mgmt tx send in case of protected management frames by adding the IEEE80211_CCMP_MIC_LEN only once. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: 1807da49733e "ath10k: wmi: add management tx by reference support over wmi" Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: don't report unset rssi values to mac80211Alagu Sankar
The SDIO firmware does not provide RSSI value to the host, it's only set to zero. In that case don't report the value to mac80211. One risk here is that value zero might be a valid value with other firmware, currently there's no way to detect that. Without the fix, the rssi value indicated by iw changes between the actual value and -95. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00005-QCARMSWP-1. Co-developed-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Alagu Sankar <alagusankar@silex-india.com> Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: sdio: reset chip on power_down()Wen Gong
The target device needs to be reset during power_down(), otherwise only the first power_up() will work. And as ath10k calls power_up() during driver initialisation the driver would be otherwise unusable. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00005-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: sdio: disable fwlog printsAlagu Sankar
The SDIO firmware may turn it on based on scratch registers so disable the firmware log to avoid that. Co-developed-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Alagu Sankar <alagusankar@silex-india.com> Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: sdio: set hi_acs_flagsAlagu Sankar
The SDIO firmware does not allow transmitting packets with the reduced tx completion HI_ACS option. SDIO firmware uses 1544 as alternate credit size, which is not big enough for the maximum sized mac80211 frames. Disable both these HI_ACS flags for SDIO. Co-developed-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Alagu Sankar <alagusankar@silex-india.com> Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: correct the format of host memory chunks in wmi init commandYu Wang
This is a theoretical fix, the issue is found in code review. When adding the host memory chunks into wmi-tlv init command, there is no separate tlv header for each host memory chunk in the struct array, which breaches the convention between host and firmware, will result in mismatch between the two. To fix this issue, add separate tlv headers for the host memory chunks in wmi-tlv init command. Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: enhance logging for vdev pdev & peer set paramRakesh Pillai
Currently after enabling the WMI debug logging, there is no detail printed about the param id and the param value for the pdev, vdev and peer params which are set. Enhance the WMI logging to print the param id and the param value for pdev, vdev and peer set param wmi commands. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: add support for ack rssi value of data tx packetsAbhishek Ambure
In WCN3990, WMI_TLV_SERVICE_TX_DATA_MGMT_ACK_RSSI service Indicates that the firmware has the capability to send the RSSI value of the ACK for all data and management packets transmitted. If WMI_RSRC_CFG_FLAG_TX_ACK_RSSI is set in host capability then firmware sends RSSI value in "data" tx completion event. Host extracts ack rssi values of data packets from their tx completion event. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1 Signed-off-by: Abhishek Ambure <aambure@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: add support for ack rssi value of management tx packetsAbhishek Ambure
In WCN3990, WMI_TLV_SERVICE_TX_DATA_MGMT_ACK_RSSI service Indicates that the firmware has the capability to send the RSSI value of the ACK for all data and management packets transmitted. If WMI_RSRC_CFG_FLAG_TX_ACK_RSSI is set in host capability then firmware sends RSSI value in "management" tx completion event. Host extracts ack rssi values of management packets from their tx completion event. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1 Signed-off-by: Abhishek Ambure <aambure@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: fix descriptor size in ce tx completion for WCN3990Rakesh Pillai
When the driver receives the tx completion of the descriptor over ce, it clears the nbytes configured for that particular descriptor. WCN3990 uses ce descriptors with 64-bit address. Currently during handling the tx completion of the descriptors, the nbytes are accessed from the descriptors using ce_desc for 32-bit targets. This will lead to clearing of memory at incorrect offset if DMA MASK is set to greater than 32 bits. Attach different ce tx copy completed handler for targets using address above 32-bit address. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26platform: set of_node in platform_device_register_full()Mans Rullgard
If the provided fwnode is an OF node, set dev.of_node as well. Also add an of_node_reused flag to struct platform_device_info and copy this to the new device. This is needed to avoid pinctrl settings being requested twice. See 4e75e1d7dac9 ("driver core: add helper to reuse a device-tree node") for a longer explanation. Some drivers are just shims that create extra "glue" devices with the DT device as parent and have the real driver bind to these. In these cases, the glue device needs to get a reference to the original DT node in order for the main driver to access properties and child nodes. For example, the sunxi-musb driver creates such a glue device using platform_device_register_full(). Consequently, devices attached to this USB interface don't get associated with DT nodes, if present, the way they do with EHCI. This change will allow sunxi-musb and similar drivers to easily propagate the DT node to child devices as required. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26mic: vop: Allow building on more systemsVincent Whitchurch
VOP_BUS does not actually depend on x86-64 or PCI or X86_DEV_DMA_OPS. The dependency on X86_DEV_DMA_OPS has been unnecessary since commit 5657933dbb6e25fe ("treewide: Move dma_ops from struct dev_archdata into struct device"). Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26mic: Rename ioremap pointer to remapVincent Whitchurch
Some architectures (like MIPS) implement ioremap as a macro, and this leads to conflicts with the ioremap function pointer in various mic structures. drivers/misc/mic/vop/vop_vringh.c: In function 'vop_virtio_init_post': drivers/misc/mic/vop/vop_vringh.c:86:13: error: macro "ioremap" passed 3 arguments, but takes just 2 Rename ioremap to remap to fix this. Likewise for iounmap. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26mic: vop: Cast pointers to unsigned longVincent Whitchurch
Fix these on 32-bit: vop_vringh.c:711:13: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26hpet: Use struct_size() in kzalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); Notice that, in this case, variable siz is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26VMCI: Support upto 64-bit PPNsVishnu DASA
Add support in the VMCI driver to handle upto 64-bit PPNs when the VMCI device exposes the capability for 64-bit PPNs. Reviewed-by: Adit Ranadive <aditr@vmware.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26misc: rtsx: Enable OCP for rts522a rts524a rts525a rts5260RickyWu
this enables and adds OCP function for Realtek A series cardreader chips and fixes some OCP flow in rts5260.c Signed-off-by: RickyWu <ricky_wu@realtek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26coresight: etm4x: Add support to enable ETMv4.2Sai Prakash Ranjan
SDM845 has ETMv4.2 and can use the existing etm4x driver. But the current etm driver checks only for ETMv4.0 and errors out for other etm4x versions. This patch adds this missing support to enable SoC's with ETMv4x to use same driver by checking only the ETM architecture major version number. Without this change, we get below error during etm probe: / # dmesg | grep etm [ 6.660093] coresight-etm4x: probe of 7040000.etm failed with error -22 [ 6.666902] coresight-etm4x: probe of 7140000.etm failed with error -22 [ 6.673708] coresight-etm4x: probe of 7240000.etm failed with error -22 [ 6.680511] coresight-etm4x: probe of 7340000.etm failed with error -22 [ 6.687313] coresight-etm4x: probe of 7440000.etm failed with error -22 [ 6.694113] coresight-etm4x: probe of 7540000.etm failed with error -22 [ 6.700914] coresight-etm4x: probe of 7640000.etm failed with error -22 [ 6.707717] coresight-etm4x: probe of 7740000.etm failed with error -22 With this change, etm probe is successful: / # dmesg | grep etm [ 6.659198] coresight-etm4x 7040000.etm: CPU0: ETM v4.2 initialized [ 6.665848] coresight-etm4x 7140000.etm: CPU1: ETM v4.2 initialized [ 6.672493] coresight-etm4x 7240000.etm: CPU2: ETM v4.2 initialized [ 6.679129] coresight-etm4x 7340000.etm: CPU3: ETM v4.2 initialized [ 6.685770] coresight-etm4x 7440000.etm: CPU4: ETM v4.2 initialized [ 6.692403] coresight-etm4x 7540000.etm: CPU5: ETM v4.2 initialized [ 6.699024] coresight-etm4x 7640000.etm: CPU6: ETM v4.2 initialized [ 6.705646] coresight-etm4x 7740000.etm: CPU7: ETM v4.2 initialized Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26regulator: da9062: Use struct_size() in devm_kzalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = alloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = alloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26regulator: mcp16502: Remove module versionAxel Lin
The module version is unlikely to be updated, use kernel version should be enough. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26regulator: fan53555: Check pdata->slew_rate settingAxel Lin
Current code does not really avoid array access out of bounds, fix it by add checking for pdata->slew_rate. If pdata->slew_rate is too big, it's a bug in pdata that needs fix. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26regulator: arizona_ldo1: Simplify arizona_ldo1_hc_set/get_voltage_selAxel Lin
Setup .vsel_reg and .vsel_mask then we can use the standard set/get_voltage_sel_regmap helpers to simplify the code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26regulator: wm831x-dcdc: Fix list of wm831x_dcdc_ilim from mA to uAAxel Lin
The wm831x_dcdc_ilim entries needs to be uA because it is used to compare with min_uA and max_uA. While at it also make the array const and change to use unsigned int. Fixes: e4ee831f949a ("regulator: Add WM831x DC-DC buck convertor support") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26habanalabs: use u64 when comparing variables' sum to u32_maxOded Gabbay
This patch fixes two smatch warnings about two if statements that are always true because of the types of the variables used - u32 when comparing the sum to u32_max. The patch changes the types to be u64 so the accumalted sum can be checked if it is larger than u32_max Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26serial: sprd: Modify the baud rate calculation formulaLanqing Liu
When the source clock is not divisible by the expected baud rate and the remainder is not less than half of the expected baud rate, the old formular will round up the frequency division coefficient. This will make the actual baud rate less than the expected value and can not meet the external transmission requirements. Thus this patch modifies the baud rate calculation formula to support the serial controller output the maximum baud rate. Signed-off-by: Lanqing Liu <lanqing.liu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26serial: 8250_of: assume reg-shift of 2 for mrvl,mmp-uartLubomir Rintel
There are two other drivers that bind to mrvl,mmp-uart and both of them assume register shift of 2 bits. There are device trees that lack the property and rely on that assumption. If this driver wins the race to bind to those devices, it should behave the same as the older deprecated driver. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26serial: 8250_pxa: honor the port number from devicetreeLubomir Rintel
Like the other OF-enabled drivers, use the port number from the firmware if the devicetree specifies an alias: aliases { ... serial2 = &uart2; /* Should be ttyS2 */ } This is how the deprecated pxa.c driver behaved, switching to 8250_pxa messes up the numbering. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26tty: hvc_xen: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/tty/hvc/hvc_xen.c: In function ‘xencons_backend_changed’: drivers/tty/hvc/hvc_xen.c:493:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dev->state == XenbusStateClosed) ^ drivers/tty/hvc/hvc_xen.c:496:2: note: here case XenbusStateClosing: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26tty: n_gsm: Mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/tty/n_gsm.c: In function ‘gsm_dlci_data’: drivers/tty/n_gsm.c:1582:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (tty) { ^ drivers/tty/n_gsm.c:1587:2: note: here case 1: ^~~~ drivers/tty/n_gsm.c: In function ‘gsm1_receive’: CC [M] drivers/scsi/snic/snic_disc.o CC [M] drivers/net/wireless/realtek/rtlwifi/pci.o CC drivers/usb/early/xhci-dbc.o drivers/tty/n_gsm.c:1981:12: warning: this statement may fall through [-Wimplicit-fallthrough=] gsm->fcs = INIT_FCS; ^ drivers/tty/n_gsm.c:1983:2: note: here case GSM_ADDRESS: /* Address continuation */ ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26mt76: add driver for MT7603E and MT7628/7688Felix Fietkau
This driver is for a newer generation of 2x2 MediaTek 802.11n chipsets. MT7603E is a PCIe chip. MT7628 and MT7688 are MIPS SoC devices with built-in WLAN. MT7688 is limited to 1x1 This driver fully supports AP, station, mesh, ad-hoc and monitor mode. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76: add driver callback for when a sta is associatedFelix Fietkau
MT7603 needs this to update the HT/VHT capabilities Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76: remove no longer used routine declarationsLorenzo Bianconi
Remove following routine declarations that are no longer used after commit cfca5f693c5d ("mt76usb: remove usb_mcu.c"): - mt76u_mcu_complete_urb - mt76u_deinit - mt76u_buf_free - mt76u_submit_urb Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76: usb: check urb->num_sgs limit in mt76u_process_rx_entryLorenzo Bianconi
check nsgs value is less than urb->num_sgs in mt76u_process_rx_entry in order to avoid an out-of-bound access of urb->sg array Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76: usb: simplify mt76u_tx_build_sg routineLorenzo Bianconi
Use skb_to_sgvec instad of skb_to_sgvec_nomark in mt76u_tx_build_sg. Remove nsgs check in mt76u_tx_build_sg since it is already performed by skb_to_sgvec Suggested-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76: usb: simplify rx buffer allocationLorenzo Bianconi
Squash mt76u_buf_alloc_sg and mt76u_buf_alloc and remove duplicated code. Reuse mt76u_refill_rx in mt76u_buf_alloc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76: usb: introduce mt76u_fill_bulk_urb routineLorenzo Bianconi
Add mt76u_fill_bulk_urb to initialize tx/rx urbs and remove duplicate code Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76: usb: fix warning in mt76u_buf_freeLorenzo Bianconi
Fix following static checker warning in mt76u_buf_free: drivers/net/wireless/mediatek/mt76/usb.c:372 mt76u_buf_free() warn: address of 'urb->sg[i]' is non-NULL There is no need to check sg page pointer since urb->num_sgs has been already validated in mt76u_fill_rx_sg Fixes: cb83585e1121 ("mt76: usb: fix possible memory leak in mt76u_buf_free") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76usb: remove usb_mcu.cStanislaw Gruszka
Don't need separate file just for kmalloc/kfree. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76usb: use synchronous msg for mcu command responsesStanislaw Gruszka
Use usb_bulk_msg for reading MCU command responses. This simplify code a lot. Together with 97a3005759c ("mt76usb: allow mt76u_bulk_msg be used for reads") it also fix possible problems with rx data buffers not being aligned and contained within single page. After doing page_frag_alloc(1024) consecutive page_frag_alloc(PAGE_SIZE) will alloc PAGE_SIZE buffer at PAGE_SIZE - 1024 offset. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76usb: allow mt76u_bulk_msg be used for readsStanislaw Gruszka
Extend mt76u_bulk_msg() such it can be used for synchronous bulk reads. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26ARM: 8837/1: coresight: etmv4: Update ID register table to add UCI supportMike Leach
Adds macro to enable UCI entries to be added to AMBA ID tables. Updates the ID register tables to contain a UCI entry for the A35 ETM device to allow correct matching of driver in the amba bus code. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-02-26ARM: 8836/1: drivers: amba: Update component matching to use the CoreSight ↵Mike Leach
UCI values. The patches provide an update of amba_device and matching code to handle the additional registers required for the Class 0x9 (CoreSight) UCI. The *data pointer in the amba_id is used by the driver to provide extended ID register values for matching. CoreSight components where PID/CID pair is currently sufficient for unique identification need not provide this additional information. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-02-26ARM: 8838/1: drivers: amba: Updates to component identification for driver ↵Mike Leach
matching. The CoreSight specification (ARM IHI 0029E), updates the ID register requirements for components on an AMBA bus, to cover both traditional ARM Primecell type devices, and newer CoreSight and other components. The Peripheral ID (PID) / Component ID (CID) pair is extended in certain cases to uniquely identify components. CoreSight components related to a single function can share Peripheral ID values, and must be further identified using a Unique Component Identifier (UCI). e.g. the ETM, CTI, PMU and Debug hardware of the A35 all share the same PID. Bits 15:12 of the CID are defined to be the device class. Class 0xF remains for PrimeCell and legacy components. Class 0x9 defines the component as CoreSight (CORESIGHT_CID above) Class 0x0, 0x1, 0xB, 0xE define components that do not have driver support at present. Class 0x2-0x8,0xA and 0xD-0xD are presently reserved. The specification futher defines which classes of device use the standard CID/PID pair, and when additional ID registers are required. This patch introduces the amba_cs_uci_id structure which will be used in all coresight drivers for indentification via the private data pointer in the amba_id structure. Existing drivers that currently use the amba_id->data pointer for private data are updated to use the amba_cs_uci_id->data pointer. Macros and inline functions are added to simplify this code. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-02-26firmware: hardcode the debug message for -ENOENTJohn Zhao
When no file /path was found, the error code of -ENOENT enumerated in errno-base.h, is returned. Stating clearly that the file was not found is much more useful for debugging, So let's be explicit about that. Signed-off-by: John Zhao <yuankuiz@codeaurora.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-15 12:59:28 +0000