summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-12-01i2c: cadence: Fix regression with bus recoveryCarsten Haitzler
Commit "i2c: cadence: Add standard bus recovery support" breaks for i2c devices that have no pinctrl defined. There is no requirement for this to exist in the DT. This has worked perfectly well without this before in at least 1 real usage case on hardware (Mali Komeda DPU, Cadence i2c to talk to a tda99xx phy). Adding the requirement to have pinctrl set up in the device tree (or otherwise be found) is a regression where the whole i2c device is lost entirely (in this case dropping entire devices which then leads to the drm display stack unable to find the phy for display output, thus having no drm display device and so on down the chain). This converts the above commit to an enhancement if pinctrl can be found for the i2c device, providing a timeout on read with recovery, but if not, do what used to be done rather than a fatal loss of a device. This restores the mentioned display devices to their working state again. Fixes: 58b924241d0a ("i2c: cadence: Add standard bus recovery support") Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com> Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Michal Simek <michal.simek@amd.com> [wsa: added braces to else-branch] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-12-01null_blk: support read-only and offline zone conditionsShin'ichiro Kawasaki
In zoned mode, zones with write pointers can have conditions "read-only" or "offline". In read-only condition, zones can not be written. In offline condition, the zones can be neither written nor read. These conditions are intended for zones with media failures, then it is difficult to set those conditions to zones on real devices. To test handling of zones in the conditions, add a feature to null_blk to set up zones in read-only or offline condition. Add new configuration attributes "zone_readonly" and "zone_offline". Write a sector to the attribute files to specify the target zone to set the zone conditions. For example, following command lines do it: echo 0 > nullb1/zone_readonly echo 524288 > nullb1/zone_offline When the specified zones are already in read-only or offline condition, normal empty condition is restored to the zones. These condition changes can be done only after the null_blk device get powered, since status area of each zone is not yet allocated before power-on. Also improve zone condition checks to inhibit all commands for zones in offline conditions. In same manner, inhibit write and zone management commands for zones in read-only condition. Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20221201061036.2342206-1-shinichiro.kawasaki@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-01libnvdimm: Introduce CONFIG_NVDIMM_SECURITY_TEST flagDave Jiang
nfit_test overrode the security_show() sysfs attribute function in nvdimm dimm_devs in order to allow testing of security unlock. With the introduction of CXL security commands, the trick to override security_show() becomes significantly more complicated. By introdcing a security flag CONFIG_NVDIMM_SECURITY_TEST, libnvdimm can just toggle the check via a compile option. In addition the original override can can be removed from tools/testing/nvdimm/. The flag will also be used to bypass cpu_cache_invalidate_memregion() when set in a different commit. This allows testing on QEMU with nfit_test or cxl_test since cpu_cache_has_invalidate_memregion() checks whether X86_FEATURE_HYPERVISOR cpu feature flag is set on x86. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166983618758.2734609.18031639517065867138.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-12-01cxl/pmem: add provider name to cxl pmem dimm attribute groupDave Jiang
Add provider name in order to associate cxl test dimm from cxl_test to the cxl pmem device when going through sysfs for security testing. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166983618174.2734609.15600031015423828810.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-12-01cxl/pmem: add id attribute to CXL based nvdimmDave Jiang
Add an id group attribute for CXL based nvdimm object. The addition allows ndctl to display the "unique id" for the nvdimm. The serial number for the CXL memory device will be used for this id. [ { "dev":"nmem10", "id":"0x4", "security":"disabled" }, ] The id attribute is needed by the ndctl security key management to setup a keyblob with a unique file name tied to the mem device. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166983617029.2734609.8251308562882142281.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-12-01nvdimm/cxl/pmem: Add support for master passphrase disable security commandDave Jiang
The original nvdimm_security_ops ->disable() only supports user passphrase for security disable. The CXL spec introduced the disabling of master passphrase. Add a ->disable_master() callback to support this new operation and leaving the old ->disable() mechanism alone. A "disable_master" command is added for the sysfs attribute in order to allow command to be issued from userspace. ndctl will need enabling in order to utilize this new operation. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166983616454.2734609.14204031148234398086.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-12-01cxl/pmem: Add "Passphrase Secure Erase" security command supportDave Jiang
Create callback function to support the nvdimm_security_ops() ->erase() callback. Translate the operation to send "Passphrase Secure Erase" security command for CXL memory device. When the mem device is secure erased, cpu_cache_invalidate_memregion() is called in order to invalidate all CPU caches before attempting to access the mem device again. See CXL 3.0 spec section 8.2.9.8.6.6 for reference. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166983615293.2734609.10358657600295932156.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-12-01cxl/pmem: Add "Unlock" security command supportDave Jiang
Create callback function to support the nvdimm_security_ops() ->unlock() callback. Translate the operation to send "Unlock" security command for CXL mem device. When the mem device is unlocked, cpu_cache_invalidate_memregion() is called in order to invalidate all CPU caches before attempting to access the mem device. See CXL rev3.0 spec section 8.2.9.8.6.4 for reference. Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166983614167.2734609.15124543712487741176.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-12-01cxl/pmem: Add "Freeze Security State" security command supportDave Jiang
Create callback function to support the nvdimm_security_ops() ->freeze() callback. Translate the operation to send "Freeze Security State" security command for CXL memory device. See CXL rev3.0 spec section 8.2.9.8.6.5 for reference. Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166983613019.2734609.10645754779802492122.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-12-01cxl/pmem: Add Disable Passphrase security command supportDave Jiang
Create callback function to support the nvdimm_security_ops ->disable() callback. Translate the operation to send "Disable Passphrase" security command for CXL memory device. The operation supports disabling a passphrase for the CXL persistent memory device. In the original implementation of nvdimm_security_ops, this operation only supports disabling of the user passphrase. This is due to the NFIT version of disable passphrase only supported disabling of user passphrase. The CXL spec allows disabling of the master passphrase as well which nvidmm_security_ops does not support yet. In this commit, the callback function will only support user passphrase. See CXL rev3.0 spec section 8.2.9.8.6.3 for reference. Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166983611878.2734609.10602135274526390127.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-12-01cxl/pmem: Add "Set Passphrase" security command supportDave Jiang
Create callback function to support the nvdimm_security_ops ->change_key() callback. Translate the operation to send "Set Passphrase" security command for CXL memory device. The operation supports setting a passphrase for the CXL persistent memory device. It also supports the changing of the currently set passphrase. The operation allows manipulation of a user passphrase or a master passphrase. See CXL rev3.0 spec section 8.2.9.8.6.2 for reference. However, the spec leaves a gap WRT master passphrase usages. The spec does not define any ways to retrieve the status of if the support of master passphrase is available for the device, nor does the commands that utilize master passphrase will return a specific error that indicates master passphrase is not supported. If using a device does not support master passphrase and a command is issued with a master passphrase, the error message returned by the device will be ambiguous. Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166983610751.2734609.4445075071552032091.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-12-01drm/amdgpu: improve GART and GTT documentationPeter Maucher
Document difference between amdgpu.gartsize and amdgpu.gttsize module parameters, as initially explained by Alex Deucher here: https://lists.freedesktop.org/archives/dri-devel/2022-October/375358.html v2: minor cleanups (Alex) Signed-off-by: Peter Maucher <bellosilicio@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-01drm/amdgpu: use sysfs_emit() to instead of scnprintf()ye xingchen
Replace the open-code with sysfs_emit() to simplify the code. Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-01drm/amd/display: use the proper fb offset for DMAlex Deucher
This fixes DMCU initialization in APU GPU passthrough. The DMCU needs the GPU physical address, not the CPU physical address. This ends up working out on bare metal because we always use the physical address, but doesn't work in passthrough because the addresses are different. Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-01drm/amdgpu: Add nv mailbox irq in soc21YuBiao Wang
Under virtualization guest needs to receive notification from host to perform reset in some cases. Add nv mailbox irq in soc21. Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-01drm/amdgpu: enable Vangogh VCN indirect sram modeLeo Liu
So that uses PSP to initialize HW. Fixes: 0c2c02b66c672e ("drm/amdgpu/vcn: add firmware support for dimgrey_cavefish") Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-01drm/amdgpu: enable Vangogh VCN indirect sram modeLeo Liu
So that uses PSP to initialize HW. Fixes: 0c2c02b66c672e ("drm/amdgpu/vcn: add firmware support for dimgrey_cavefish") Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-12-01Merge tag 'hwmon-for-v6.1-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix refcount leak and NULL pointer access in coretemp driver - Fix UAF in ibmpex driver - Add missing pci_disable_device() to i5500_temp driver - Fix calculation in ina3221 driver - Fix temperature scaling in ltc2947 driver - Check result of devm_kcalloc call in asus-ec-sensors driver * tag 'hwmon-for-v6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (asus-ec-sensors) Add checks for devm_kcalloc hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new() hwmon: (coretemp) Check for null before removing sysfs attrs hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails hwmon: (i5500_temp) fix missing pci_disable_device() hwmon: (ina3221) Fix shunt sum critical calculation hwmon: (ltc2947) fix temperature scaling
2022-12-01drbd: add context parameter to expect() macroChristoph Böhmwalder
Originally-from: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20221201110349.1282687-6-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-01drbd: introduce drbd_ratelimit()Christoph Böhmwalder
Use call site specific ratelimit instead of one single static global. Also ratelimit ASSERTION messages generated by expect(). Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20221201110349.1282687-5-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-01drbd: introduce dynamic debugChristoph Böhmwalder
Incorporate as many out-of-tree changes as possible without changing the genl API. Over the years, we restructured this several times, and also changed the log format. One breaking change is that DRBD 9 gained "implicit options", like a connection name. This cannot be replayed here without changing the API, so save it for later. Originally-from: Andreas Gruenbacher <agruen@linbit.com> Originally-from: Philipp Reisner <philipp.reisner@linbit.com> Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20221201110349.1282687-4-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-01drbd: split polymorph printk to its own fileChristoph Böhmwalder
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20221201110349.1282687-3-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-01drbd: unify how failed assertions are loggedChristoph Böhmwalder
Unify how failed assertions from D_ASSERT() and expect() are logged. Originally-from: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20221201110349.1282687-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-01hwmon: (asus-ec-sensors) Add checks for devm_kcallocYuan Can
As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference. Fixes: d0ddfd241e57 ("hwmon: (asus-ec-sensors) add driver for ASUS EC") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221125014329.121560-1-yuancan@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-01hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new()Yang Yingliang
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So call it after using to avoid refcount leak. Fixes: 14513ee696a0 ("hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221118093303.214163-1-yangyingliang@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-01hwmon: (coretemp) Check for null before removing sysfs attrsPhil Auld
If coretemp_add_core() gets an error then pdata->core_data[indx] is already NULL and has been kfreed. Don't pass that to sysfs_remove_group() as that will crash in sysfs_remove_group(). [Shortened for readability] [91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label' <cpu offline> [91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188 [91855.165103] #PF: supervisor read access in kernel mode [91855.194506] #PF: error_code(0x0000) - not-present page [91855.224445] PGD 0 P4D 0 [91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI ... [91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80 ... [91855.796571] Call Trace: [91855.810524] coretemp_cpu_offline+0x12b/0x1dd [coretemp] [91855.841738] ? coretemp_cpu_online+0x180/0x180 [coretemp] [91855.871107] cpuhp_invoke_callback+0x105/0x4b0 [91855.893432] cpuhp_thread_fun+0x8e/0x150 ... Fix this by checking for NULL first. Signed-off-by: Phil Auld <pauld@redhat.com> Cc: linux-hwmon@vger.kernel.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221117162313.3164803-1-pauld@redhat.com Fixes: 199e0de7f5df3 ("hwmon: (coretemp) Merge pkgtemp with coretemp") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-01regulator: core: fix module refcount leak in set_supply()Yang Yingliang
If create_regulator() fails in set_supply(), the module refcount needs be put to keep refcount balanced. Fixes: e2c09ae7a74d ("regulator: core: Increase refcount for regulator supply's module") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221201122706.4055992-2-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-12-01drm/amdgpu: enable VCN RAS poison for VCN v4.0Tao Zhou
Configure related registers. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-01drm/amdgpu/mes11: enable reg active pollJack Xiao
Enable reg active poll in mes11. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Tested-and-acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-01drm/amd/amdgpu: update mes11 api defJack Xiao
Update the api def of mes11. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Tested-and-acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-01dm ioctl: fix a couple ioctl codesMikulas Patocka
Change the ioctl codes from DM_DEV_ARM_POLL to DM_DEV_ARM_POLL_CMD and from DM_GET_TARGET_VERSION to DM_GET_TARGET_VERSION_CMD. Note that the "cmd" field of "struct _ioctls" is never used, thus this commit doesn't fix any bug, it just makes the code consistent. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-12-01dm ioctl: a small code cleanup in list_version_get_infoMikulas Patocka
No need to modify info->vers if we overwrite it immediately. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-12-01dm thin: resume even if in FAIL modeLuo Meng
If a thinpool set fail_io while suspending, resume will fail with: device-mapper: resume ioctl on vg-thinpool failed: Invalid argument The thin-pool also can't be removed if an in-flight bio is in the deferred list. This can be easily reproduced using: echo "offline" > /sys/block/sda/device/state dd if=/dev/zero of=/dev/mapper/thin bs=4K count=1 dmsetup suspend /dev/mapper/pool mkfs.ext4 /dev/mapper/thin dmsetup resume /dev/mapper/pool The root cause is maybe_resize_data_dev() will check fail_io and return error before called dm_resume. Fix this by adding FAIL mode check at the end of pool_preresume(). Cc: stable@vger.kernel.org Fixes: da105ed5fd7e ("dm thin metadata: introduce dm_pool_abort_metadata") Signed-off-by: Luo Meng <luomeng12@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-12-01dm cache: set needs_check flag after aborting metadataMike Snitzer
Otherwise the commit that will be aborted will be associated with the metadata objects that will be torn down. Must write needs_check flag to metadata with a reset block manager. Found through code-inspection (and compared against dm-thin.c). Cc: stable@vger.kernel.org Fixes: 028ae9f76f29 ("dm cache: add fail io mode and needs_check flag") Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-12-01dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abortMike Snitzer
Same ABBA deadlock pattern fixed in commit 4b60f452ec51 ("dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata") to DM-cache's metadata. Reported-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: stable@vger.kernel.org Fixes: 028ae9f76f29 ("dm cache: add fail io mode and needs_check flag") Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-12-01dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadataZhihao Cheng
Following concurrent processes: P1(drop cache) P2(kworker) drop_caches_sysctl_handler drop_slab shrink_slab down_read(&shrinker_rwsem) - LOCK A do_shrink_slab super_cache_scan prune_icache_sb dispose_list evict ext4_evict_inode ext4_clear_inode ext4_discard_preallocations ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_read_bh_nowait submit_bh dm_submit_bio do_worker process_deferred_bios commit metadata_operation_failed dm_pool_abort_metadata down_write(&pmd->root_lock) - LOCK B __destroy_persistent_data_objects dm_block_manager_destroy dm_bufio_client_destroy unregister_shrinker down_write(&shrinker_rwsem) thin_map | dm_thin_find_block ↓ down_read(&pmd->root_lock) --> ABBA deadlock , which triggers hung task: [ 76.974820] INFO: task kworker/u4:3:63 blocked for more than 15 seconds. [ 76.976019] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910 [ 76.978521] task:kworker/u4:3 state:D stack:0 pid:63 ppid:2 [ 76.978534] Workqueue: dm-thin do_worker [ 76.978552] Call Trace: [ 76.978564] __schedule+0x6ba/0x10f0 [ 76.978582] schedule+0x9d/0x1e0 [ 76.978588] rwsem_down_write_slowpath+0x587/0xdf0 [ 76.978600] down_write+0xec/0x110 [ 76.978607] unregister_shrinker+0x2c/0xf0 [ 76.978616] dm_bufio_client_destroy+0x116/0x3d0 [ 76.978625] dm_block_manager_destroy+0x19/0x40 [ 76.978629] __destroy_persistent_data_objects+0x5e/0x70 [ 76.978636] dm_pool_abort_metadata+0x8e/0x100 [ 76.978643] metadata_operation_failed+0x86/0x110 [ 76.978649] commit+0x6a/0x230 [ 76.978655] do_worker+0xc6e/0xd90 [ 76.978702] process_one_work+0x269/0x630 [ 76.978714] worker_thread+0x266/0x630 [ 76.978730] kthread+0x151/0x1b0 [ 76.978772] INFO: task test.sh:2646 blocked for more than 15 seconds. [ 76.979756] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910 [ 76.982111] task:test.sh state:D stack:0 pid:2646 ppid:2459 [ 76.982128] Call Trace: [ 76.982139] __schedule+0x6ba/0x10f0 [ 76.982155] schedule+0x9d/0x1e0 [ 76.982159] rwsem_down_read_slowpath+0x4f4/0x910 [ 76.982173] down_read+0x84/0x170 [ 76.982177] dm_thin_find_block+0x4c/0xd0 [ 76.982183] thin_map+0x201/0x3d0 [ 76.982188] __map_bio+0x5b/0x350 [ 76.982195] dm_submit_bio+0x2b6/0x930 [ 76.982202] __submit_bio+0x123/0x2d0 [ 76.982209] submit_bio_noacct_nocheck+0x101/0x3e0 [ 76.982222] submit_bio_noacct+0x389/0x770 [ 76.982227] submit_bio+0x50/0xc0 [ 76.982232] submit_bh_wbc+0x15e/0x230 [ 76.982238] submit_bh+0x14/0x20 [ 76.982241] ext4_read_bh_nowait+0xc5/0x130 [ 76.982247] ext4_read_block_bitmap_nowait+0x340/0xc60 [ 76.982254] ext4_mb_init_cache+0x1ce/0xdc0 [ 76.982259] ext4_mb_load_buddy_gfp+0x987/0xfa0 [ 76.982263] ext4_discard_preallocations+0x45d/0x830 [ 76.982274] ext4_clear_inode+0x48/0xf0 [ 76.982280] ext4_evict_inode+0xcf/0xc70 [ 76.982285] evict+0x119/0x2b0 [ 76.982290] dispose_list+0x43/0xa0 [ 76.982294] prune_icache_sb+0x64/0x90 [ 76.982298] super_cache_scan+0x155/0x210 [ 76.982303] do_shrink_slab+0x19e/0x4e0 [ 76.982310] shrink_slab+0x2bd/0x450 [ 76.982317] drop_slab+0xcc/0x1a0 [ 76.982323] drop_caches_sysctl_handler+0xb7/0xe0 [ 76.982327] proc_sys_call_handler+0x1bc/0x300 [ 76.982331] proc_sys_write+0x17/0x20 [ 76.982334] vfs_write+0x3d3/0x570 [ 76.982342] ksys_write+0x73/0x160 [ 76.982347] __x64_sys_write+0x1e/0x30 [ 76.982352] do_syscall_64+0x35/0x80 [ 76.982357] entry_SYSCALL_64_after_hwframe+0x63/0xcd Function metadata_operation_failed() is called when operations failed on dm pool metadata, dm pool will destroy and recreate metadata. So, shrinker will be unregistered and registered, which could down write shrinker_rwsem under pmd_write_lock. Fix it by allocating dm_block_manager before locking pmd->root_lock and destroying old dm_block_manager after unlocking pmd->root_lock, then old dm_block_manager is replaced with new dm_block_manager under pmd->root_lock. So, shrinker register/unregister could be done without holding pmd->root_lock. Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216676 Cc: stable@vger.kernel.org #v5.2+ Fixes: e49e582965b3 ("dm thin: add read only and fail io modes") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-12-01firmware: arm_ffa: Move constants to header fileWill Deacon
FF-A function IDs and error codes will be needed in the hypervisor too, so move to them to the header file where they can be shared. Rename the version constants with an "FFA_" prefix so that they are less likely to clash with other code in the tree. Co-developed-by: Andrew Walbran <qwandor@google.com> Signed-off-by: Andrew Walbran <qwandor@google.com> Signed-off-by: Quentin Perret <qperret@google.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20221116170335.2341003-2-qperret@google.com Signed-off-by: Will Deacon <will@kernel.org>
2022-12-01regulator: core: fix use_count leakage when handling boot-onRui Zhang
I found a use_count leakage towards supply regulator of rdev with boot-on option. ┌───────────────────┐ ┌───────────────────┐ │ regulator_dev A │ │ regulator_dev B │ │ (boot-on) │ │ (boot-on) │ │ use_count=0 │◀──supply──│ use_count=1 │ │ │ │ │ └───────────────────┘ └───────────────────┘ In case of rdev(A) configured with `regulator-boot-on', the use_count of supplying regulator(B) will increment inside regulator_enable(rdev->supply). Thus, B will acts like always-on, and further balanced regulator_enable/disable cannot actually disable it anymore. However, B was also configured with `regulator-boot-on', we wish it could be disabled afterwards. Signed-off-by: Rui Zhang <zr.zhang@vivo.com> Link: https://lore.kernel.org/r/20221201033806.2567812-1-zr.zhang@vivo.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-12-01spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODEAlexander Sverdlin
Commit f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs") has changed the user-space interface so that bogus SPI_CS_HIGH started to appear in the mask returned by SPI_IOC_RD_MODE even for active-low CS pins. Commit 138c9c32f090 ("spi: spidev: Fix CS polarity if GPIO descriptors are used") fixed only SPI_IOC_WR_MODE part of the problem. Let's fix SPI_IOC_RD_MODE symmetrically. Test case: #include <sys/ioctl.h> #include <fcntl.h> #include <linux/spi/spidev.h> int main(int argc, char **argv) { char modew = SPI_CPHA; char moder; int f = open("/dev/spidev0.0", O_RDWR); if (f < 0) return 1; ioctl(f, SPI_IOC_WR_MODE, &modew); ioctl(f, SPI_IOC_RD_MODE, &moder); return moder == modew ? 0 : 2; } Fixes: f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://lore.kernel.org/r/20221130162927.539512-1-alexander.sverdlin@siemens.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-12-01Revert "clocksource/drivers/riscv: Events are stopped during CPU suspend"Conor Dooley
This reverts commit 232ccac1bd9b5bfe73895f527c08623e7fa0752d. On the subject of suspend, the RISC-V SBI spec states: This does not cover whether any given events actually reach the hart or not, just what the hart will do if it receives an event. On PolarFire SoC, and potentially other SiFive based implementations, events from the RISC-V timer do reach a hart during suspend. This is not the case for the implementation on the Allwinner D1 - there timer events are not received during suspend. To fix this, the CLOCK_EVT_FEAT_C3STOP (mis)feature was enabled for the timer driver - but this has broken both RCU stall detection and timers generally on PolarFire SoC and potentially other SiFive based implementations. If an AXI read to the PCIe controller on PolarFire SoC times out, the system will stall, however, with CLOCK_EVT_FEAT_C3STOP active, the system just locks up without RCU stalling: io scheduler mq-deadline registered io scheduler kyber registered microchip-pcie 2000000000.pcie: host bridge /soc/pcie@2000000000 ranges: microchip-pcie 2000000000.pcie: MEM 0x2008000000..0x2087ffffff -> 0x0008000000 microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer microchip-pcie 2000000000.pcie: axi read request error microchip-pcie 2000000000.pcie: axi read timeout microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer Freeing initrd memory: 7332K Similarly issues were reported with clock_nanosleep() - with a test app that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250 & the blamed commit in place, the sleep times are rounded up to the next jiffy: == CPU: 1 == == CPU: 2 == == CPU: 3 == == CPU: 4 == Mean: 7.974992 Mean: 7.976534 Mean: 7.962591 Mean: 3.952179 Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193 Hi: 9.472000 Hi: 10.495000 Hi: 8.864000 Hi: 4.736000 Lo: 6.087000 Lo: 6.380000 Lo: 4.872000 Lo: 3.403000 Samples: 521 Samples: 521 Samples: 521 Samples: 521 Fortunately, the D1 has a second timer, which is "currently used in preference to the RISC-V/SBI timer driver" so a revert here does not hurt operation of D1 in its current form. Ultimately, a DeviceTree property (or node) will be added to encode the behaviour of the timers, but until then revert the addition of CLOCK_EVT_FEAT_C3STOP. Fixes: 232ccac1bd9b ("clocksource/drivers/riscv: Events are stopped during CPU suspend") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Acked-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/ Link: https://github.com/riscv-non-isa/riscv-sbi-doc/issues/98/ Link: https://lore.kernel.org/linux-riscv/bf6d3b1f-f703-4a25-833e-972a44a04114@sholland.org/ Link: https://lore.kernel.org/r/20221122121620.3522431-1-conor.dooley@microchip.com
2022-12-01clocksource/drivers/ingenic-ost: Define pm functions properly in ↵Lukas Bulwahn
platform_driver struct Commit ca7b72b5a5f2 ("clocksource: Add driver for the Ingenic JZ47xx OST") adds the struct platform_driver ingenic_ost_driver, with the definition of pm functions under the non-existing config PM_SUSPEND, which means the intended pm functions were never actually included in any build. As the only callbacks are .suspend_noirq and .resume_noirq, we can assume that it is intended to be CONFIG_PM_SLEEP. Since commit 1a3c7bb08826 ("PM: core: Add new *_PM_OPS macros, deprecate old ones"), the default pattern for platform_driver definitions conditional for CONFIG_PM_SLEEP is to use pm_sleep_ptr(). As __maybe_unused annotations on the dev_pm_ops structure and its callbacks are not needed anymore, remove these as well. Suggested-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20221123083159.22821-1-lukas.bulwahn@gmail.com
2022-12-01clocksource/drivers/sh_cmt: Access registers according to specWolfram Sang
Documentation for most CMTs say that it takes two input clocks before changes propagate to the timer. This is especially relevant when the timer is stopped to change further settings. Implement the delays according to the spec. To avoid unnecessary delays in atomic mode, also check if the to-be-written value actually differs. CMCNT is a bit special because testing showed that it requires 3 cycles to propagate, which affects all CMTs. Also, the WRFLAG needs to be checked before writing. This fixes "cannot clear CMCNT" messages which occur often on R-Car Gen4 SoCs, but only very rarely on older SoCs for some reason. Fixes: 81b3b2711072 ("clocksource: sh_cmt: Add support for multiple channels per device") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20221130210609.7718-1-wsa+renesas@sang-engineering.com
2022-12-01mmc: sdhci-sprd: Fix no reset data and command after voltage switchWenchao Chen
After switching the voltage, no reset data and command will cause CMD2 timeout. Fixes: 29ca763fc26f ("mmc: sdhci-sprd: Add pin control support for voltage switch") Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221130121328.25553-1-wenchao.chen@unisoc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-01s390/cio: sort out physical vs virtual pointers usageAlexander Gordeev
This does not fix a real bug, since virtual addresses are currently indentical to physical ones. Use virt_to_phys() for intparm interrupt parameter to convert a 64-bit virtual address to the 32-bit physical address, which is expected to be below 2GB. Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-12-01cpufreq: tegra186: Use flexible array to simplify memory allocationChristophe JAILLET
Use flexible array to simplify memory allocation. It saves some memory, avoids an indirection when reading the 'clusters' array and removes some LoC. Detailed explanation: ==================== Knowing that: - each devm_ allocation over-allocates 40 bytes for internal needs - Some rounding is done by the memory allocator on 8, 16, 32, 64, 96, 128, 192, 256, 512, 1024, 2048, 4096, 8192 boundaries and that: - sizeof(struct tegra186_cpufreq_data) = 24 - sizeof(struct tegra186_cpufreq_cluster) = 16 Memory allocations in tegra186_cpufreq_probe() are: data: (24 + 40) = 64 => 64 bytes data->clusters: (2 * 16 + 40) = 72 => 96 bytes So a total of 160 bytes are allocated. 56 for the real need, 80 for internal uses and 24 are wasted. If 'struct tegra186_cpufreq_data' is reordered so that 'clusters' is a flexible array: - it saves one pointer in the structure - only one allocation is needed So, only 96 bytes are allocated: 16 + 2 * 16 + 40 = 88 => 96 bytes Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-12-01drm: bridge: dw_hdmi: fix preference of RGB modes over YUV420Guillaume BRUN
Cheap monitors sometimes advertise YUV modes they don't really have (HDMI specification mandates YUV support so even monitors without actual support will often wrongfully advertise it) which results in YUV matches and user forum complaints of a red tint to light colour display areas in common desktop environments. Moving the default RGB fall-back before YUV selection results in RGB mode matching in most cases, reducing complaints. Fixes: 6c3c719936da ("drm/bridge: synopsys: dw-hdmi: add bus format negociation") Signed-off-by: Guillaume BRUN <the.cheaterman@gmail.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221116143523.2126-1-the.cheaterman@gmail.com
2022-11-30net: ethernet: ti: am65-cpsw: Fix RGMII configuration at SPEED_10Siddharth Vadapalli
The am65-cpsw driver supports configuring all RGMII variants at interface speed of 10 Mbps. However, in the process of shifting to the PHYLINK framework, the support for all variants of RGMII except the PHY_INTERFACE_MODE_RGMII variant was accidentally removed. Fix this by using phy_interface_mode_is_rgmii() to check for all variants of RGMII mode. Fixes: e8609e69470f ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK") Reported-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20221129050639.111142-1-s-vadapalli@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30net: broadcom: Add PTP_1588_CLOCK_OPTIONAL dependency for BCMGENET under ↵YueHaibing
ARCH_BCM2835 commit 8d820bc9d12b ("net: broadcom: Fix BCMGENET Kconfig") fixes the build that contain 99addbe31f55 ("net: broadcom: Select BROADCOM_PHY for BCMGENET") and enable BCMGENET=y but PTP_1588_CLOCK_OPTIONAL=m, which otherwise leads to a link failure. However this may trigger a runtime failure. Fix the original issue by propagating the PTP_1588_CLOCK_OPTIONAL dependency of BROADCOM_PHY down to BCMGENET. Fixes: 8d820bc9d12b ("net: broadcom: Fix BCMGENET Kconfig") Fixes: 99addbe31f55 ("net: broadcom: Select BROADCOM_PHY for BCMGENET") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20221125115003.30308-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30cxl/pmem: Introduce nvdimm_security_ops with ->get_flags() operationDave Jiang
Add nvdimm_security_ops support for CXL memory device with the introduction of the ->get_flags() callback function. This is part of the "Persistent Memory Data-at-rest Security" command set for CXL memory device support. The ->get_flags() function provides the security state of the persistent memory device defined by the CXL 3.0 spec section 8.2.9.8.6.1. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166983609611.2734609.13231854299523325319.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-11-30rapidio: rio: fix possible name leak in rio_register_mport()Yang Yingliang
If device_register() returns error, the name allocated by dev_set_name() need be freed. It should use put_device() to give up the reference in the error path, so that the name can be freed in kobject_cleanup(), and list_del() is called to delete the port from rio_mports. Link: https://lkml.kernel.org/r/20221114152636.2939035-3-yangyingliang@huawei.com Fixes: 2aaf308b95b2 ("rapidio: rework device hierarchy and introduce mport class of devices") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-16 14:09:13 +0000