| Age | Commit message (Collapse) | Author |
|---|
|
Looks like almost all changes to this driver had been tree-wide
refactoring since git era begun. There is one commit from Al
15 years ago which could potentially be fixing a real bug.
The driver is using virt_to_bus() and is a real magnet for pointless
cleanups. It seems unlikely to have real users. Let's try to shed
this maintenance burden.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Preserve the error code from mtk_foe_entry_commit(). Do not return
success.
Fixes: c4f033d9e03e ("net: ethernet: mtk_eth_soc: rework hardware flow table management")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the VCAP filters to support multiple tag_8021q CPU ports.
TX works using a filter for VLAN ID on the ingress of the CPU port, with
a redirect and a VLAN pop action. This can be updated trivially by
amending the ingress port mask of this rule to match on all tag_8021q
CPU ports.
RX works using a filter for ingress port on the egress of the CPU port,
with a VLAN push action. Here we need to replicate these filters for
each tag_8021q CPU port, and let them all have the same action.
This means that the OCELOT_VCAP_ES0_TAG_8021Q_RXVLAN() cookie needs to
encode a unique value for every {user port, CPU port} pair it's given.
Do this by encoding the CPU port in the upper 16 bits of the cookie, and
the user port in the lower 16 bits.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a desire for the felix driver to gain support for multiple
tag_8021q CPU ports, but the current model prevents it.
This is because ocelot_apply_bridge_fwd_mask() only takes into
consideration whether a port is a tag_8021q CPU port, but not whose CPU
port it is.
We need a model where we can have a direct affinity between an ocelot
port and a tag_8021q CPU port. This serves as the basis for multiple CPU
ports.
Declare a "dsa_8021q_cpu" backpointer in struct ocelot_port which
encodes that affinity. Repurpose the "ocelot_set_dsa_8021q_cpu" API to
"ocelot_assign_dsa_8021q_cpu" to express the change of paradigm.
Note that this change makes the first practical use of the new
ocelot_port->index field in ocelot_port_unassign_dsa_8021q_cpu(), where
we need to remove the old tag_8021q CPU port from the reserved VLAN range.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Absorb the final details of calling ocelot_port_{,un}set_dsa_8021q_cpu(),
i.e. the need to lock &ocelot->fwd_domain_lock, into the callee, to
simplify the caller and permit easier code reuse later.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tag_8021q CPU
Add more logic to ocelot_port_{,un}set_dsa_8021q_cpu() from the ocelot
switch lib by encapsulating the ocelot_apply_bridge_fwd_mask() call that
felix used to have.
This is necessary because the CPU port change procedure will also need
to do this, and it's good to reduce code duplication by having an entry
point in the ocelot switch lib that does all that is needed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PGID_CPU must be updated every time a port is configured or unconfigured
as a tag_8021q CPU port. The ocelot switch lib already has a hook for
that operation, so move the updating of PGID_CPU to those hooks.
These bits are pretty specific to DSA, so normally I would keep them out
of the common switch lib, but when tag_8021q is in use, this has
implications upon the forwarding mask determined by
ocelot_apply_bridge_fwd_mask() and called extensively by the switch lib.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PGID_BC is configured statically by ocelot_init() to flood towards the
CPU port module, and dynamically by ocelot_port_set_bcast_flood()
towards all user ports.
When the tagging protocol changes, the intention is to turn off flooding
towards the old pipe towards the host, and to turn it on towards the new
pipe.
Due to a recent change which removed the adjustment of PGID_BC from
felix_set_host_flood(), 3 things happen.
- when we change from NPI to tag_8021q mode: in this mode, the CPU port
module is accessed via registers, and used to read PTP packets with
timestamps. We fail to disable broadcast flooding towards the CPU port
module, and to enable broadcast flooding towards the physical port
that serves as a DSA tag_8021q CPU port.
- from tag_8021q to NPI mode: in this mode, the CPU port module is
redirected to a physical port. We fail to disable broadcast flooding
towards the physical tag_8021q CPU port, and to enable it towards the
CPU port module at ocelot->num_phys_ports.
- when the ports are put in promiscuous mode, we also fail to update
PGID_BC towards the host pipe of the current protocol.
First issue means that felix_check_xtr_pkt() has to do extra work,
because it will not see only PTP packets, but also broadcasts. It needs
to dequeue these packets just to drop them.
Third issue is inconsequential, since PGID_BC is allocated from the
nonreserved multicast PGID space, and these PGIDs are conveniently
initialized to 0x7f (i.e. flood towards all ports except the CPU port
module). Broadcasts reach the NPI port via ocelot_init(), and reach the
tag_8021q CPU port via the hardware defaults.
Second issue is also inconsequential, because we fail both at disabling
and at enabling broadcast flooding on a port, so the defaults mentioned
above are preserved, and they are fine except for the performance impact.
Fixes: 7a29d220f4c0 ("net: dsa: felix: reimplement tagging protocol change with function pointers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The VBT send packet port selection was never updated for ICL+ where the
2nd link is on port B instead of port C as in VLV+ DSI.
First, single link DSI needs to use the configured port instead of
relying on the VBT sequence block port. Remove the hard-coded port C
check here and make it generic. For reference, see commit f915084edc5a
("drm/i915: Changes related to the sequence port no for") for the
original VLV specific fix.
Second, the sequence block port number is either 0 or 1, where 1
indicates the 2nd link. Remove the hard-coded port C here for 2nd
link. (This could be a "find second set bit" on DSI ports, but just
check the two possible options.)
Third, sanity check the result with a warning to avoid a NULL pointer
dereference.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5984
Cc: stable@vger.kernel.org # v4.19+
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220520094600.2066945-1-jani.nikula@intel.com
(cherry picked from commit 08c59dde71b73a0ac94e3ed2d431345b01f20485)
|
|
Combine all collected EDAC changes for submission into v5.19:
* edac-misc:
EDAC/xgene: Fix typo processsors -> processors
EDAC/i5100: Remove unused inline function i5100_nrecmema_dm_buf_id()
EDAC/ghes: Change ghes_hw from global to static
EDAC/armada_xp: Use devm_platform_ioremap_resource()
EDAC/synopsys: Add a SPDX identifier
EDAC/synopsys: Add driver support for i.MX platforms
EDAC/dmc520: Don't print an error for each unconfigured interrupt line
efi/cper: Reformat CPER memory error location to more readable
EDAC/ghes: Unify CPER memory error location reporting
efi/cper: Add a cper_mem_err_status_str() to decode error description
powerpc/85xx: Remove fsl,85... bindings
* edac-alloc-cleanup:
EDAC: Use kcalloc()
EDAC/mc: Get rid of edac_align_ptr()
EDAC/device: Sanitize edac_device_alloc_ctl_info() definition
EDAC/device: Get rid of the silly one-shot memory allocation in edac_device_alloc_ctl_info()
EDAC/pci: Get rid of the silly one-shot memory allocation in edac_pci_alloc_ctl_info()
EDAC/mc: Get rid of silly one-shot struct allocation in edac_mc_alloc()
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Now io_acct_set is alloc and free in personality. Remove the codes that
free io_acct_set in md_free and md_stop.
Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality)
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
In normal stop process, it does like this:
do_md_stop
|
__md_stop (pers->free(); mddev->private=NULL)
|
md_free (free mddev)
__md_stop sets mddev->private to NULL after pers->free. The raid device
will be stopped and mddev memory is free. But in reshape, it doesn't
free the mddev and mddev will still be used in new raid.
In reshape, it first sets mddev->private to new_pers and then runs
old_pers->free(). Now raid0 sets mddev->private to NULL in raid0_free.
The new raid can't work anymore. It will panic when dereference
mddev->private because of NULL pointer dereference.
It can panic like this:
[63010.814972] kernel BUG at drivers/md/raid10.c:928!
[63010.819778] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[63010.825011] CPU: 3 PID: 44437 Comm: md0_resync Kdump: loaded Not tainted 5.14.0-86.el9.x86_64 #1
[63010.833789] Hardware name: Dell Inc. PowerEdge R6415/07YXFK, BIOS 1.15.0 09/11/2020
[63010.841440] RIP: 0010:raise_barrier+0x161/0x170 [raid10]
[63010.865508] RSP: 0018:ffffc312408bbc10 EFLAGS: 00010246
[63010.870734] RAX: 0000000000000000 RBX: ffffa00bf7d39800 RCX: 0000000000000000
[63010.877866] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffa00bf7d39800
[63010.884999] RBP: 0000000000000000 R08: fffffa4945e74400 R09: 0000000000000000
[63010.892132] R10: ffffa00eed02f798 R11: 0000000000000000 R12: ffffa00bbc435200
[63010.899266] R13: ffffa00bf7d39800 R14: 0000000000000400 R15: 0000000000000003
[63010.906399] FS: 0000000000000000(0000) GS:ffffa00eed000000(0000) knlGS:0000000000000000
[63010.914485] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[63010.920229] CR2: 00007f5cfbe99828 CR3: 0000000105efe000 CR4: 00000000003506e0
[63010.927363] Call Trace:
[63010.929822] ? bio_reset+0xe/0x40
[63010.933144] ? raid10_alloc_init_r10buf+0x60/0xa0 [raid10]
[63010.938629] raid10_sync_request+0x756/0x1610 [raid10]
[63010.943770] md_do_sync.cold+0x3e4/0x94c
[63010.947698] md_thread+0xab/0x160
[63010.951024] ? md_write_inc+0x50/0x50
[63010.954688] kthread+0x149/0x170
[63010.957923] ? set_kthread_struct+0x40/0x40
[63010.962107] ret_from_fork+0x22/0x30
Removing the code that sets mddev->private to NULL in raid0 can fix
problem.
Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality)
Reported-by: Fine Fan <ffan@redhat.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Use the %pg format specifier to save on stack consumption and code size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Generally, the md_unregister_thread is called with reconfig_mutex, but
raid_message in dm-raid doesn't hold reconfig_mutex to unregister thread,
so md_unregister_thread can be called simulitaneously from two call sites
in theory.
Then after previous commit which remove the protection of reconfig_mutex
for md_unregister_thread completely, the potential issue could be worse
than before.
Let's take pers_lock at the beginning of function to ensure reentrancy.
Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Unregister sync_thread doesn't need to hold reconfig_mutex since it
doesn't reconfigure array.
And it could cause deadlock problem for raid5 as follows:
1. process A tried to reap sync thread with reconfig_mutex held after echo
idle to sync_action.
2. raid5 sync thread was blocked if there were too many active stripes.
3. SB_CHANGE_PENDING was set (because of write IO comes from upper layer)
which causes the number of active stripes can't be decreased.
4. SB_CHANGE_PENDING can't be cleared since md_check_recovery was not able
to hold reconfig_mutex.
More details in the link:
https://lore.kernel.org/linux-raid/5ed54ffc-ce82-bf66-4eff-390cb23bc1ac@molgen.mpg.de/T/#t
And add one parameter to md_reap_sync_thread since it could be called by
dm-raid which doesn't hold reconfig_mutex.
Reported-and-tested-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Merge for 5.18-rc1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
carl9170 has a big union (struct carl9170_cmd) with all the command
types in it. But it allocates buffers only large enough for a given
command. This upsets GCC 12:
drivers/net/wireless/ath/carl9170/cmd.c:125:30: warning: array subscript ‘struct carl9170_cmd[0]’ is partly outside array bounds of ‘unsigned char[8]’ [-Warray-bounds]
125 | tmp->hdr.cmd = cmd;
| ~~~~~~~~~~~~~^~~~~
Punt the warning to W=1 for now. Hopefully GCC will learn to
recognize which fields are in-bounds.
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC 12 really doesn't like partial struct allocations:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:2202:32: warning: array subscript ‘struct brcmf_ext_join_params_le[0]’ is partly outside array bounds of ‘void[70]’ [-Warray-bounds]
2202 | ext_join_params->scan_le.passive_time =
| ^~
brcmfmac is trying to save 2 bytes at the end by either allocating
or not allocating a channel member. Let's keep @join_params_size
the "right" size but kmalloc() the full structure.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC 12 says:
drivers/net/wireless/intel/iwlwifi/mvm/sta.c:1076:37: warning: array subscript -1 is below array bounds of ‘struct iwl_mvm_tid_data[9]’ [-Warray-bounds]
1076 | if (mvmsta->tid_data[tid].state != IWL_AGG_OFF)
| ~~~~~~~~~~~~~~~~^~~~~
Whatever, tid is a bit from for_each_set_bit(), it's clearly unsigned.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For some reason GCC 12 decided to complain about the common
pattern of queuing an object onto a list on the stack in ath6k:
inlined from ‘ath6kl_htc_mbox_tx’ at drivers/net/wireless/ath/ath6kl/htc_mbox.c:1142:3:
include/linux/list.h:74:19: warning: storing the address of local variable ‘queue’ in ‘*&packet_15(D)->list.prev’ [-Wdangling-pointer=]
74 | new->prev = prev;
| ~~~~~~~~~~^~~~~~
Move the warning to W=1, hopefully it goes away with a compiler
update.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .value is a two-dim array, not a pointer.
struct iqk_matrix_regs {
bool iqk_done;
long value[1][IQK_MATRIX_REG_NUM];
};
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC 12 says:
drivers/net/wireless/ath/ath9k/mac.c: In function ‘ath9k_hw_resettxqueue’:
drivers/net/wireless/ath/ath9k/mac.c:373:22: warning: array subscript 32 is above array bounds of ‘struct ath9k_tx_queue_info[10]’ [-Warray-bounds]
373 | qi = &ah->txq[q];
| ~~~~~~~^~~
I don't know where it got the 32 from, relegate the warning to W=1+.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC is upset that we check the return value of plfxlc_usb_dev()
even tho it can't be NULL:
drivers/net/wireless/purelifi/plfxlc/usb.c: In function ‘resume’:
drivers/net/wireless/purelifi/plfxlc/usb.c:840:20: warning: the comparison will always evaluate as ‘true’ for the address of ‘dev’ will never be NULL [-Waddress]
840 | if (!pl || !plfxlc_usb_dev(pl))
| ^
plfxlc_usb_dev() returns an address of one of the members of pl,
so it's safe to drop these checks.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since kconfig 'select' does not follow dependency chains, if symbol KSA
selects KSB, then KSA should also depend on the same symbols that KSB
depends on, in order to prevent Kconfig warnings and possible build
errors.
Change NET_DSA_SMSC_LAN9303_I2C and NET_DSA_SMSC_LAN9303_MDIO so that
they are limited to VLAN_8021Q if the latter is enabled. This prevents
the Kconfig warning:
WARNING: unmet direct dependencies detected for NET_DSA_SMSC_LAN9303
Depends on [m]: NETDEVICES [=y] && NET_DSA [=y] && (VLAN_8021Q [=m] || VLAN_8021Q [=m]=n)
Selected by [y]:
- NET_DSA_SMSC_LAN9303_I2C [=y] && NETDEVICES [=y] && NET_DSA [=y] && I2C [=y]
Fixes: 430065e26719 ("net: dsa: lan9303: add VLAN IDs to master device")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Juergen Borleis <jbe@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Mans Rullgard <mans@mansr.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cppcheck reports
[drivers/net/fddi/skfp/smt.c:750]: (warning) printf format string requires 0 parameters but 2 are given.
DB_SBAN is a vararg macro, like DB_ESSN. Remove the extra args and the nl.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for mt7986-eth driver available on mt7986 soc.
Tested-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the code converting scratch_ring pointer to void
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the code converting {tx,rx} ring dma pointer to void
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce MTK_NETSYS_V2 support. MTK_NETSYS_V2 defines 32B TX/RX DMA
descriptors.
This is a preliminary patch to add mt7986 ethernet support.
Tested-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce reg_map structure to add the capability to support different
register definitions. Move register definitions in mtk_regmap structure.
This is a preliminary patch to introduce mt7986 ethernet support.
Tested-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove mtk_rx_dma structure layout dependency in mtk_rx_alloc/mtk_rx_clean.
Initialize to 0 rxd3 and rxd4 in mtk_rx_alloc.
This is a preliminary patch to add mt7986 ethernet support.
Tested-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a preliminary to ad mt7986 ethernet support.
Tested-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to tx counterpart, introduce rxd_size in mtk_soc_data data
structure.
This is a preliminary patch to add mt7986 ethernet support.
Tested-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a preliminary patch to add mt7986 ethernet support.
Tested-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a preliminary patch to add mt7986 ethernet support.
Tested-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a preliminary patch to add mt7986 ethernet support.
Tested-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to remove mtk_tx_dma size dependency, introduce txd_size in
mtk_soc_data data structure. Rely on txd_size in mtk_init_fq_dma() and
mtk_dma_free() routines.
This is a preliminary patch to add mt7986 ethernet support.
Tested-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mtk_tx_set_dma_desc
Move tx dma descriptor configuration in mtk_tx_set_dma_desc routine.
This is a preliminary patch to introduce mt7986 ethernet support since
it relies on a different tx dma descriptor layout.
Tested-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
whenever possible
Rely on GFP_KERNEL for dma descriptors mappings in mtk_tx_alloc(),
mtk_rx_alloc() and mtk_init_fq_dma() since they are run in non-irq
context.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
GCC 12 currently generates a rather inconsistent warning:
drivers/net/ethernet/broadcom/tg3.c:17795:51: warning: array subscript 5 is above array bounds of ‘struct tg3_napi[5]’ [-Warray-bounds]
17795 | struct tg3_napi *tnapi = &tp->napi[i];
| ~~~~~~~~^~~
i is guaranteed < tp->irq_max which in turn is either 1 or 5.
There are more loops like this one in the driver, but strangely
GCC 12 dislikes only this single one.
Silence this silliness for now.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
GCC 12 gets upset because driver allocates partial
struct ice_aqc_sw_rules_elem buffers. The writes are
within bounds.
Silence these warnings for now, our build bot runs GCC 12
so we won't allow any new instances.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
GCC 12 gets upset because in mtk_foe_entry_commit_subflow()
this driver allocates a partial structure. The writes are
within bounds.
Silence these warnings for now, our build bot runs GCC 12
so we won't allow any new instances.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DMA unmap the Scatter/Gather table before going through the array to
unmap and free each of the header and data chunks. This is so we do not
touch the data between the dma_map and dma_unmap calls.
Fixes: 3dc709e0cd47 ("dpaa2-eth: add support for software TSO")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The incorrect software annotation field was being used, swa->sg.sgt_size
instead of swa->tso.sgt_size, which meant that the SGT buffer was
unmapped with a wrong size.
This is also confirmed by the DMA API debug prints which showed the
following:
[ 38.962434] DMA-API: fsl_dpaa2_eth dpni.2: device driver frees DMA memory with different size [device address=0x0000fffffafba740] [map size=224 bytes] [unmap size=0 bytes]
[ 38.980496] WARNING: CPU: 11 PID: 1131 at kernel/dma/debug.c:973 check_unmap+0x58c/0x9b0
[ 38.988586] Modules linked in:
[ 38.991631] CPU: 11 PID: 1131 Comm: iperf3 Not tainted 5.18.0-rc7-00117-g59130eeb2b8f #1972
[ 38.999970] Hardware name: NXP Layerscape LX2160ARDB (DT)
Fixes: 3dc709e0cd47 ("dpaa2-eth: add support for software TSO")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TSO header was DMA unmapped before the virtual address was retrieved
and then used to free the buffer. This meant that we were actually
removing the DMA map and then trying to search for it to help in
retrieving the virtual address. This lead to a invalid virtual address
being used in the kfree call.
Fix this by calling dpaa2_iova_to_virt() prior to the dma_unmap call.
[ 487.231819] Unable to handle kernel paging request at virtual address fffffd9807000008
(...)
[ 487.354061] Hardware name: SolidRun LX2160A Honeycomb (DT)
[ 487.359535] pstate: a0400005 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 487.366485] pc : kfree+0xac/0x304
[ 487.369799] lr : kfree+0x204/0x304
[ 487.373191] sp : ffff80000c4eb120
[ 487.376493] x29: ffff80000c4eb120 x28: ffff662240c46400 x27: 0000000000000001
[ 487.383621] x26: 0000000000000001 x25: ffff662246da0cc0 x24: ffff66224af78000
[ 487.390748] x23: ffffad184f4ce008 x22: ffffad1850185000 x21: ffffad1838d13cec
[ 487.397874] x20: ffff6601c0000000 x19: fffffd9807000000 x18: 0000000000000000
[ 487.405000] x17: ffffb910cdc49000 x16: ffffad184d7d9080 x15: 0000000000004000
[ 487.412126] x14: 0000000000000008 x13: 000000000000ffff x12: 0000000000000000
[ 487.419252] x11: 0000000000000004 x10: 0000000000000001 x9 : ffffad184d7d927c
[ 487.426379] x8 : 0000000000000000 x7 : 0000000ffffffd1d x6 : ffff662240a94900
[ 487.433505] x5 : 0000000000000003 x4 : 0000000000000009 x3 : ffffad184f4ce008
[ 487.440632] x2 : ffff662243eec000 x1 : 0000000100000100 x0 : fffffc0000000000
[ 487.447758] Call trace:
[ 487.450194] kfree+0xac/0x304
[ 487.453151] dpaa2_eth_free_tx_fd.isra.0+0x33c/0x3e0 [fsl_dpaa2_eth]
[ 487.459507] dpaa2_eth_tx_conf+0x100/0x2e0 [fsl_dpaa2_eth]
[ 487.464989] dpaa2_eth_poll+0xdc/0x380 [fsl_dpaa2_eth]
Fixes: 3dc709e0cd47 ("dpaa2-eth: add support for software TSO")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215886
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "ok" tc action is useful when placed in front of a more generic
filter to exclude some more specific rules from matching it.
The ocelot switches can offload this tc action by creating an empty
action vector (no _ENA fields set to 1). This makes sense for all of
VCAP IS1, IS2 and ES0 (but not for PSFP).
Add support for this action. Note that this makes the
gact_drop_and_ok_test() selftest pass, where "action ok" is used in
front of an "action drop" rule, both offloaded to VCAP IS2.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge power-supply fixes, that missed the v5.18 merge window
into power-supply's for-next branch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v5.19-2
* Fix immutable IRQ chip examples in the GPIO documentation
* Make use of immutable IRQ chip in Intel pin control drivers
* Add module alias for Intel Apollo Lake
The following is an automated git shortlog grouped by driver:
baytrail:
- make irq_chip immutable
broxton:
- Add module alias for Intel Apollo Lake
cherryview:
- Use GPIO chip pointer in chv_gpio_irq_mask_unmask()
- make irq_chip immutable
Documentation:
- gpio: Advertise irqd_to_hwirq() helper in the examples
- gpio: Fix IRQ mask and unmask examples
intel:
- Fix kernel doc format, i.e. add return sections
- Drop unused irqchip member in struct intel_pinctrl
- make irq_chip immutable
lynxpoint:
- make irq_chip immutable
|
|
An error code returned by devm_clk_get() might have other meanings than
"This clock doesn't exist". So use devm_clk_get_optional() and handle
all remaining errors as fatal.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'prod_idx' (atomic_t) is larger than 'shadow_idx' (u16), so some memory is
over-allocated.
Fixes: b15a9f37be2b ("net-next/hinic: Add wq")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
