| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.13
Core:
- Switch to aperture_remove_all_conflicting_devices()
- Simplify msm_disp_state_dump_regs()
DPU:
- Add SA8775P support
- Add (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996
support
- Enable support for larger framebuffers (required for X.Org working
with several outputs)
- Dropped LM_3, LM_4 (MSM8998, SDM845)
- Fixed DSPP_3 routing on SDM845
DP:
- Add SA8775P support
HDMI:
- Mark two arrays as const in MSM8998 HDMI PHY driver
GPU:
- a7xx preemption support
- Adreno A663 support
- Typos fixes, etc
- Fix excessive stack usage in a6xx GMU
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt7k8zDHsg2Uzx9apzyQMut8XdLXMQSRNn7WArdPUV5Qw@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge Linus tree for some drm-fixes needed for msm and xe merges.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Qualcomm QMP driver fixes for null deref on suspend, bogus supplies
fix and reset entries fix
- BCM usb driver init array fix
- cadence array offset fix
- starfive link configuration fix
- config dependency fix for rockchip driver
- freescale reset signal fix before pll lock
- tegra driver fix for error pointer check
* tag 'phy-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: tegra: xusb: Add error pointer check in xusb.c
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Fix X1E80100 resets entries
phy: freescale: imx8m-pcie: Do CMN_RST just before PHY PLL lock check
phy: phy-rockchip-samsung-hdptx: Depend on CONFIG_COMMON_CLK
phy: ti: phy-j721e-wiz: fix usxgmii configuration
phy: starfive: jh7110-usb: Fix link configuration to controller
phy: qcom: qmp-pcie: drop bogus x1e80100 qref supplies
phy: qcom: qmp-combo: move driver data initialisation earlier
phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend
phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend
phy: qcom: qmp-usb: fix NULL-deref on runtime suspend
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: add missing x1e80100 pipediv2 clocks
phy: usb: disable COMMONONN for dual mode
phy: cadence: Sierra: Fix offset of DEQ open eye algorithm control register
phy: usb: Fix missing elements in BCM4908 USB init array
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- TI driver fix to set EOP for cyclic BCDMA transfers
- sh rz-dmac driver fix for handling config with zero address
* tag 'dmaengine-fix-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ti: k3-udma: Set EOP for all TRs in cyclic BCDMA transfer
dmaengine: sh: rz-dmac: handle configs where one address is zero
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core revert from Greg KH:
"Here is a single driver core revert for 6.12-rc6. It reverts a change
that came in -rc1 that was supposed to resolve a reported problem, but
caused another one, so revert it for now so that we can get this all
worked out properly in 6.13.
The revert has been in linux-next all week with no reported issues"
* tag 'driver-core-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "driver core: Fix uevent_show() vs driver detach race"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.12-rc6 that
have been sitting in my tree this week. Included in here are the
following:
- thunderbolt driver fixes for reported issues
- USB typec driver fixes
- xhci driver fixes for reported problems
- dwc2 driver revert for a broken change
- usb phy driver fix
- usbip tool fix
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: restrict SNK_WAIT_CAPABILITIES_TIMEOUT transitions to non self-powered devices
usb: phy: Fix API devm_usb_put_phy() can not release the phy
usb: typec: use cleanup facility for 'altmodes_node'
usb: typec: fix unreleased fwnode_handle in typec_port_register_altmodes()
usb: typec: qcom-pmic-typec: fix missing fwnode removal in error path
usb: typec: qcom-pmic-typec: use fwnode_handle_put() to release fwnodes
usb: acpi: fix boot hang due to early incorrect 'tunneled' USB3 device links
Revert "usb: dwc2: Skip clock gating on Broadcom SoCs"
xhci: Fix Link TRB DMA in command ring stopped completion event
xhci: Use pm_runtime_get to prevent RPM on unsupported systems
usbip: tools: Fix detach_port() invalid port error path
thunderbolt: Honor TMU requirements in the domain when setting TMU mode
thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fixes from Greg KH:
"Here are some small char/misc/iio fixes for 6.12-rc6 that resolve
some reported issues. Included in here are the following:
- small IIO driver fixes for many reported issues
- mei driver fix for a suddenly much reported issue for an "old"
issue.
- MAINTAINERS update for a developer who has moved companies and
forgot to update their old entry.
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: use kvmalloc for read buffer
MAINTAINERS: add netup_unidvb maintainer
iio: dac: Kconfig: Fix build error for ltc2664
iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr()
staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()
docs: iio: ad7380: fix supply for ad7380-4
iio: adc: ad7380: fix supplies for ad7380-4
iio: adc: ad7380: add missing supplies
iio: adc: ad7380: use devm_regulator_get_enable_read_voltage()
dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
iio: light: veml6030: fix microlux value calculation
iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table()
iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for regression in input core introduced in 6.11 preventing
re-registering input handlers
- a fix for adp5588-keys driver tyring to disable interrupt 0 at
suspend when devices is used without interrupt
- a fix for edt-ft5x06 to stop leaking regmap structure when probing
fails and to make sure it is not released too early on removal.
* tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: fix regression when re-registering input handlers
Input: adp5588-keys - do not try to disable interrupt 0
Input: edt-ft5x06 - fix regmap leak when probe fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- Fix an off-by-one error in the failure path of msi_domain_alloc(),
which causes the cleanup loop to terminate early and leaking the
first allocated interrupt.
- Handle a corner case in GIC-V4 versus a lazily mapped Virtual
Processing Element (VPE). If the VPE has not been mapped because the
guest has not yet emitted a mapping command, then the set_affinity()
callback returns an error code, which causes the vCPU management to
fail.
Return success in this case without touching the hardware. This will
be done later when the guest issues the mapping command.
* tag 'irq-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v4: Correctly deal with set_affinity on lazily-mapped VPEs
genirq/msi: Fix off-by-one error in msi_domain_alloc()
|
|
Commit d469647bafd9 ("Input: simplify event handling logic") introduced
code that would set handler->events() method to either
input_handler_events_filter() or input_handler_events_default() or
input_handler_events_null(), depending on the kind of input handler
(a filter or a regular one) we are dealing with. Unfortunately this
breaks cases when we try to re-register the same filter (as is the case
with sysrq handler): after initial registration the handler will have 2
event handling methods defined, and will run afoul of the check in
input_handler_check_methods():
input: input_handler_check_methods: only one event processing method can be defined (sysrq)
sysrq: Failed to register input handler, error -22
Fix this by adding handle_events() method to input_handle structure and
setting it up when registering a new input handle according to event
handling methods defined in associated input_handler structure, thus
avoiding modifying the input_handler structure.
Reported-by: "Ned T. Crigler" <crigler@gmail.com>
Reported-by: Christian Heusel <christian@heusel.eu>
Tested-by: "Ned T. Crigler" <crigler@gmail.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Fixes: d469647bafd9 ("Input: simplify event handling logic")
Link: https://lore.kernel.org/r/Zx2iQp6csn42PJA7@xavtug
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Enable device-specific ACS-like functionality even if the device
doesn't advertise an ACS capability, which got broken when adding
fancy ACS kernel parameter (Jason Gunthorpe)
* tag 'pci-v6.12-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix pci_enable_acs() support for the ACS quirks
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes pull, nothing too out of the ordinary, the mediatek
fixes came in a batch that I might have preferred a bit earlier but
all seem fine, otherwise regular xe/amdgpu and a few misc ones.
xe:
- Fix missing HPD interrupt enabling, bringing one PM refactor with it
- Workaround LNL GGTT invalidation not being visible to GuC
- Avoid getting jobs stuck without a protecting timeout
ivpu:
- Fix firewall IRQ handling
panthor:
- Fix firmware initialization wrt page sizes
- Fix handling and reporting of dead job groups
sched:
- Guarantee forward progress via WC_MEM_RECLAIM
tests:
- Fix memory leak in drm_display_mode_from_cea_vic()
amdgpu:
- DCN 3.5 fix
- Vangogh SMU KASAN fix
- SMU 13 profile reporting fix
mediatek:
- Fix degradation problem of alpha blending
- Fix color format MACROs in OVL
- Fix get efuse issue for MT8188 DPTX
- Fix potential NULL dereference in mtk_crtc_destroy()
- Correct dpi power-domains property
- Add split subschema property constraints"
* tag 'drm-fixes-2024-11-02' of https://gitlab.freedesktop.org/drm/kernel: (27 commits)
drm/xe: Don't short circuit TDR on jobs not started
drm/xe: Add mmio read before GGTT invalidate
drm/tests: hdmi: Fix memory leaks in drm_display_mode_from_cea_vic()
drm/connector: hdmi: Fix memory leak in drm_display_mode_from_cea_vic()
drm/tests: helpers: Add helper for drm_display_mode_from_cea_vic()
drm/panthor: Report group as timedout when we fail to properly suspend
drm/panthor: Fail job creation when the group is dead
drm/panthor: Fix firmware initialization on systems with a page size > 4k
accel/ivpu: Fix NOC firewall interrupt handling
drm/xe/display: Add missing HPD interrupt enabling during non-d3cold RPM resume
drm/xe/display: Separate the d3cold and non-d3cold runtime PM handling
drm/xe: Remove runtime argument from display s/r functions
drm/amdgpu/smu13: fix profile reporting
drm/amd/pm: Vangogh: Fix kernel memory out of bounds write
Revert "drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35"
drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM
drm/tegra: Fix NULL vs IS_ERR() check in probe()
dt-bindings: display: mediatek: split: add subschema property constraints
dt-bindings: display: mediatek: dpi: correct power-domains property
drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Ira Weiny:
"The bulk of these fixes center around an initialization order bug
reported by Gregory Price and some additional fall out from the
debugging effort.
In summary, cxl_acpi and cxl_mem race and previously worked because of
a bus_rescan_devices() while testing without modules built in.
Unfortunately with modules built in the rescan would fail due to the
cxl_port driver being registered late via the build order. Furthermore
it was found bus_rescan_devices() did not guarantee a probe barrier
which CXL was expecting. Additional fixes to cxl-test and decoder
allocation came along as they were found in this debugging effort.
The other fixes are pretty minor but one affects trace point data seen
by user space.
Summary:
- Fix crashes when running with cxl-test code
- Fix Trace DRAM Event Record field decodes
- Fix module/built in initialization order errors
- Fix use after free on decoder shutdowns
- Fix out of order decoder allocations
- Improve cxl-test to better reflect real world systems"
* tag 'cxl-fixes-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/test: Improve init-order fidelity relative to real-world systems
cxl/port: Prevent out-of-order decoder allocation
cxl/port: Fix use-after-free, permit out-of-order decoder shutdown
cxl/acpi: Ensure ports ready at cxl_acpi_probe() return
cxl/port: Fix cxl_bus_rescan() vs bus_rescan_devices()
cxl/port: Fix CXL port initialization order when the subsystem is built-in
cxl/events: Fix Trace DRAM Event Record
cxl/core: Return error when cxl_endpoint_gather_bandwidth() handles a non-PCI device
|
|
Pull block fixes from Jens Axboe:
- Fixup for a recent blk_rq_map_user_bvec() patch
- NVMe pull request via Keith:
- Spec compliant identification fix (Keith)
- Module parameter to enable backward compatibility on unusual
namespace formats (Keith)
- Target double free fix when using keys (Vitaliy)
- Passthrough command error handling fix (Keith)
* tag 'block-6.12-20241101' of git://git.kernel.dk/linux:
nvme: re-fix error-handling for io_uring nvme-passthrough
nvmet-auth: assign dh_key to NULL after kfree_sensitive
nvme: module parameter to disable pi with offsets
block: fix queue limits checks in blk_rq_map_user_bvec for real
nvme: enhance cns version checking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Make the ACPI CPPC library use a raw spinlock for operations carried
out in scheduler context via the schedutil governor and the ACPI CPPC
cpufreq driver (Pierre Gondois)"
* tag 'acpi-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Make rmw_lock a raw_spin_lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an uninitialized variable in GPIO swnode code
- add a missing return value check for devm_mutex_init()
- fix an old issue with debugfs output
* tag 'gpio-fixes-for-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: fix debugfs dangling chip separator
gpiolib: fix debugfs newline separators
gpio: sloppy-logic-analyzer: Check for error code from devm_mutex_init() call
gpio: fix uninit-value in swnode_find_gpio
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix missing HPD interrupt enabling, bringing one PM refactor with it
(Imre / Maarten)
- Workaround LNL GGTT invalidation not being visible to GuC
(Matthew Brost)
- Avoid getting jobs stuck without a protecting timeout (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tsbftadm7owyizzdaqnqu7u4tqggxgeqeztlfvmj5fryxlfomi@5m5bfv2zvzmw
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The important one is a change to the way in which we handle protection
keys around signal delivery so that we're more closely aligned with
the x86 behaviour, however there is also a revert of the previous fix
to disable software tag-based KASAN with GCC, since a workaround
materialised shortly afterwards.
I'd love to say we're done with 6.12, but we're aware of some
longstanding fpsimd register corruption issues that we're almost at
the bottom of resolving.
Summary:
- Fix handling of POR_EL0 during signal delivery so that pushing the
signal context doesn't fail based on the pkey configuration of the
interrupted context and align our user-visible behaviour with that
of x86.
- Fix a bogus pointer being passed to the CPU hotplug code from the
Arm SDEI driver.
- Re-enable software tag-based KASAN with GCC by using an alternative
implementation of '__no_sanitize_address'"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: signal: Improve POR_EL0 handling to avoid uaccess failures
firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state()
Revert "kasan: Disable Software Tag-Based KASAN with GCC"
kasan: Fix Software Tag-Based KASAN with GCC
|
|
Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:
drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
95 | ret = drm_bridge_attach(encoder, bridge, NULL,
| ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
96 | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
| ^
Include the header directly.
Fixes: 004555a18d57 ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.13:
All of the previous pull request, with MORE!
Core Changes:
- Update documentation for scheduler start/stop and job init.
- Add dedede and sm8350-hdk hardware to ci runs.
Driver Changes:
- Small fixes and cleanups to panfrost, omap, nouveau, ivpu, zynqmp, v3d,
panthor docs, and leadtek-ltk050h3146w.
- Crashdump support for qaic.
- Support DP compliance in zynqmp.
- Add Samsung S6E88A0-AMS427AP24 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/deeef745-f3fb-4e85-a9d0-e8d38d43c1cf@linux.intel.com
|
|
Pull rdma fixes from Jason Gunthorpe:
- Put the QP netlink dump back in cxgb4, fixes a user visible
regression
- Don't change the rounding style in mlx5 for user provided rd_atomic
values
- Resolve a race in bnxt_re around the qp-handle table array
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: synchronize the qp-handle table array
RDMA/bnxt_re: Fix the usage of control path spin locks
RDMA/mlx5: Round max_rd_atomic/max_dest_rd_atomic up instead of down
RDMA/cxgb4: Dump vendor specific QP details
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi, bluetooth and netfilter.
No known new regressions outstanding.
Current release - regressions:
- wifi: mt76: do not increase mcu skb refcount if retry is not
supported
Current release - new code bugs:
- wifi:
- rtw88: fix the RX aggregation in USB 3 mode
- mac80211: fix memory corruption bug in struct ieee80211_chanctx
Previous releases - regressions:
- sched:
- stop qdisc_tree_reduce_backlog on TC_H_ROOT
- sch_api: fix xa_insert() error path in tcf_block_get_ext()
- wifi:
- revert "wifi: iwlwifi: remove retry loops in start"
- cfg80211: clear wdev->cqm_config pointer on free
- netfilter: fix potential crash in nf_send_reset6()
- ip_tunnel: fix suspicious RCU usage warning in ip_tunnel_find()
- bluetooth: fix null-ptr-deref in hci_read_supported_codecs
- eth: mlxsw: add missing verification before pushing Tx header
- eth: hns3: fixed hclge_fetch_pf_reg accesses bar space out of
bounds issue
Previous releases - always broken:
- wifi: mac80211: do not pass a stopped vif to the driver in
.get_txpower
- netfilter: sanitize offset and length before calling skb_checksum()
- core:
- fix crash when config small gso_max_size/gso_ipv4_max_size
- skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension
- mptcp: protect sched with rcu_read_lock
- eth: ice: fix crash on probe for DPLL enabled E810 LOM
- eth: macsec: fix use-after-free while sending the offloading packet
- eth: stmmac: fix unbalanced DMA map/unmap for non-paged SKB data
- eth: hns3: fix kernel crash when 1588 is sent on HIP08 devices
- eth: mtk_wed: fix path of MT7988 WO firmware"
* tag 'net-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
net: hns3: fix kernel crash when 1588 is sent on HIP08 devices
net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue
net: hns3: initialize reset_timer before hclgevf_misc_irq_init()
net: hns3: don't auto enable misc vector
net: hns3: Resolved the issue that the debugfs query result is inconsistent.
net: hns3: fix missing features due to dev->features configuration too early
net: hns3: fixed reset failure issues caused by the incorrect reset type
net: hns3: add sync command to sync io-pgtable
net: hns3: default enable tx bounce buffer when smmu enabled
netfilter: nft_payload: sanitize offset and length before calling skb_checksum()
net: ethernet: mtk_wed: fix path of MT7988 WO firmware
selftests: forwarding: Add IPv6 GRE remote change tests
mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address
mlxsw: pci: Sync Rx buffers for device
mlxsw: pci: Sync Rx buffers for CPU
mlxsw: spectrum_ptp: Add missing verification before pushing Tx header
net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()
netfilter: Fix use-after-free in get_info()
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20241028
1. Fix degradation problem of alpha blending
2. Fix color format MACROs in OVL
3. Fix get efuse issue for MT8188 DPTX
4. Fix potential NULL dereference in mtk_crtc_destroy()
5. Correct dpi power-domains property
6. Add split subschema property constraints
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028135846.3570-1-chunkuang.hu@kernel.org
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.12-2024-10-31:
amdgpu:
- DCN 3.5 fix
- Vangogh SMU KASAN fix
- SMU 13 profile reporting fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031151539.3523633-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
ivpu:
- Fix firewall IRQ handling
panthor:
- Fix firmware initialization wrt page sizes
- Fix handling and reporting of dead job groups
sched:
- Guarantee forward progress via WC_MEM_RECLAIM
tests:
- Fix memory leak in drm_display_mode_from_cea_vic()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031144348.GA7826@linux-2.fritz.box
|
|
Add the missing newline after entries for recently removed gpio chips
so that the chip sections are separated by a newline as intended.
Fixes: e348544f7994 ("gpio: protect the list of GPIO devices with SRCU")
Cc: stable@vger.kernel.org # 6.9
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241028125000.24051-3-johan+linaro@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The gpiolib debugfs interface exports a list of all gpio chips in a
system and the state of their pins.
The gpio chip sections are supposed to be separated by a newline
character, but a long-standing bug prevents the separator from
being included when output is generated in multiple sessions, making the
output inconsistent and hard to read.
Make sure to only suppress the newline separator at the beginning of the
file as intended.
Fixes: f9c4a31f6150 ("gpiolib: Use seq_file's iterator interface")
Cc: stable@vger.kernel.org # 3.7
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241028125000.24051-2-johan+linaro@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Short circuiting TDR on jobs not started is an optimization which is not
required. On LNL we are facing an issue where jobs do not get scheduled
by the GuC if it misses a GGTT page update. When this occurs let the TDR
fire, toggle the scheduling which may get the job unstuck, and print a
warning message. If the TDR fires twice on job that hasn't started,
timeout the job.
v2:
- Add warning message (Paulo)
- Add fixes tag (Paulo)
- Timeout job which hasn't started after TDR firing twice
v3:
- Include local change
v4:
- Short circuit check_timeout on job not started
- use warn level rather than notice (Paulo)
Fixes: 7ddb9403dd74 ("drm/xe: Sample ctx timestamp to determine if jobs have timed out")
Cc: stable@vger.kernel.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025214330.2010521-2-matthew.brost@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 35d25a4a0012e690ef0cc4c5440231176db595cc)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
On LNL without a mmio read before a GGTT invalidate the GuC can
incorrectly read the GGTT scratch page upon next access leading to jobs
not getting scheduled. A mmio read before a GGTT invalidate seems to fix
this. Since a GGTT invalidate is not a hot code path, blindly do a mmio
read before each GGTT invalidate.
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3164
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023221200.1797832-1-matthew.brost@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 5a710196883e0ac019ac6df2a6d79c16ad3c32fa)
[ Fix conflict with mmio vs gt argument ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.
Fixes: 7828b7bbbf20 ("gpio: add sloppy logic analyzer using polling")
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241030174132.2113286-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Fix an issue detected by the Smatch tool:
drivers/gpio/gpiolib-swnode.c:78 swnode_find_gpio() error:
uninitialized symbol 'ret'.
The issue occurs because the 'ret' variable may be used without
initialization if the for_each_gpio_property_name loop does not run.
This could lead to returning an undefined value, causing unpredictable
behavior.
Initialize 'ret' to 0 before the loop to ensure the function
returns an error code if no properties are parsed, maintaining proper
error handling.
Fixes: 9e4c6c1ad ("Merge tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linux")
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://lore.kernel.org/r/20241026090642.28633-1-surajsonawane0215@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
drm_sched_start()'s and drm_sched_stop()'s names suggest that those
functions might be intended for actively starting and stopping the
scheduler on initialization and teardown.
They are, however, only used on timeout handling (reset recovery). The
docstrings should reflect that to prevent confusion.
Document those functions' purpose.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029133819.78696-2-pstanner@redhat.com
|
|
Currently, HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL. But the tx process would still try to set hardware time
stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash.
[ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge]
[ 128.292938] sp : ffff800059b93140
[ 128.297200] x29: ffff800059b93140 x28: 0000000000003280
[ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080
[ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001
[ 128.315969] x23: 0000000000000000 x22: 0000000000000194
[ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000
[ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000
[ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24
[ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000
[ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368
[ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02
[ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0
[ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000
[ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff
[ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294
[ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080
[ 128.390626] Call trace:
[ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3]
[ 128.405468] xmit_one.constprop.0+0xc4/0x200
[ 128.410600] dev_hard_start_xmit+0x54/0xf0
[ 128.415556] sch_direct_xmit+0xe8/0x634
[ 128.420246] __dev_queue_xmit+0x224/0xc70
[ 128.425101] dev_queue_xmit+0x1c/0x40
[ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch]
[ 128.435409] do_output+0x60/0x17c [openvswitch]
[ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch]
[ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch]
[ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch]
[ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch]
[ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch]
[ 128.471460] xmit_one.constprop.0+0xc4/0x200
[ 128.476561] dev_hard_start_xmit+0x54/0xf0
[ 128.481489] __dev_queue_xmit+0x968/0xc70
[ 128.486330] dev_queue_xmit+0x1c/0x40
[ 128.490856] ip_finish_output2+0x250/0x570
[ 128.495810] __ip_finish_output+0x170/0x1e0
[ 128.500832] ip_finish_output+0x3c/0xf0
[ 128.505504] ip_output+0xbc/0x160
[ 128.509654] ip_send_skb+0x58/0xd4
[ 128.513892] udp_send_skb+0x12c/0x354
[ 128.518387] udp_sendmsg+0x7a8/0x9c0
[ 128.522793] inet_sendmsg+0x4c/0x8c
[ 128.527116] __sock_sendmsg+0x48/0x80
[ 128.531609] __sys_sendto+0x124/0x164
[ 128.536099] __arm64_sys_sendto+0x30/0x5c
[ 128.540935] invoke_syscall+0x50/0x130
[ 128.545508] el0_svc_common.constprop.0+0x10c/0x124
[ 128.551205] do_el0_svc+0x34/0xdc
[ 128.555347] el0_svc+0x20/0x30
[ 128.559227] el0_sync_handler+0xb8/0xc0
[ 128.563883] el0_sync+0x160/0x180
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180
Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the misc irq is initialized before reset_timer setup. But
it will access the reset_timer in the irq handler. So initialize
the reset_timer earlier.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, there is a time window between misc irq enabled
and service task inited. If an interrupte is reported at
this time, it will cause warning like below:
[ 16.324639] Call trace:
[ 16.324641] __queue_delayed_work+0xb8/0xe0
[ 16.324643] mod_delayed_work_on+0x78/0xd0
[ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge]
[ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge]
[ 16.324666] __handle_irq_event_percpu+0x64/0x1e0
[ 16.324667] handle_irq_event+0x80/0x170
[ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc
[ 16.324671] __handle_domain_irq+0x84/0xfc
[ 16.324673] gic_handle_irq+0x88/0x2c0
[ 16.324674] el1_irq+0xb8/0x140
[ 16.324677] arch_cpu_idle+0x18/0x40
[ 16.324679] default_idle_call+0x5c/0x1bc
[ 16.324682] cpuidle_idle_call+0x18c/0x1c4
[ 16.324684] do_idle+0x174/0x17c
[ 16.324685] cpu_startup_entry+0x30/0x6c
[ 16.324687] secondary_start_kernel+0x1a4/0x280
[ 16.324688] ---[ end trace 6aa0bff672a964aa ]---
So don't auto enable misc vector when request irq..
Fixes: 7be1b9f3e99f ("net: hns3: make hclge_service use delayed workqueue")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch modifies the implementation of debugfs:
When the user process stops unexpectedly, not all data of the file system
is read. In this case, the save_buf pointer is not released. When the user
process is called next time, save_buf is used to copy the cached data
to the user space. As a result, the queried data is inconsistent. To solve
this problem, determine whether the function is invoked for the first time
based on the value of *ppos. If *ppos is 0, obtain the actual data.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the netdev->features is configured in hns3_nic_set_features.
As a result, __netdev_update_features considers that there is no feature
difference, and the procedures of the real features are missing.
Fixes: 2a7556bb2b73 ("net: hns3: implement ndo_features_check ops for hns3 driver")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a reset type that is not supported by the driver is input, a reset
pending flag bit of the HNAE3_NONE_RESET type is generated in
reset_pending. The driver does not have a mechanism to clear this type
of error. As a result, the driver considers that the reset is not
complete. This patch provides a mechanism to clear the
HNAE3_NONE_RESET flag and the parameter of
hnae3_ae_ops.set_default_reset_request is verified.
The error message:
hns3 0000:39:01.0: cmd failed -16
hns3 0000:39:01.0: hclge device re-init failed, VF is disabled!
hns3 0000:39:01.0: failed to reset VF stack
hns3 0000:39:01.0: failed to reset VF(4)
hns3 0000:39:01.0: prepare reset(2) wait done
hns3 0000:39:01.0 eth4: already uninitialized
Use the crash tool to view struct hclgevf_dev:
struct hclgevf_dev {
...
default_reset_request = 0x20,
reset_level = HNAE3_NONE_RESET,
reset_pending = 0x100,
reset_type = HNAE3_NONE_RESET,
...
};
Fixes: 720bd5837e37 ("net: hns3: add set_default_reset_request in the hnae3_ae_ops")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
To avoid errors in pgtable prefectch, add a sync command to sync
io-pagtable.
This is a supplement for the previous patch.
We want all the tx packet can be handled with tx bounce buffer path.
But it depends on the remain space of the spare buffer, checked by the
hns3_can_use_tx_bounce(). In most cases, maybe 99.99%, it returns true.
But once it return false by no available space, the packet will be handled
with the former path, which will map/unmap the skb buffer.
Then the driver will face the smmu prefetch risk again.
So add a sync command in this case to avoid smmu prefectch,
just protects corner scenes.
Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The SMMU engine on HIP09 chip has a hardware issue.
SMMU pagetable prefetch features may prefetch and use a invalid PTE
even the PTE is valid at that time. This will cause the device trigger
fake pagefaults. The solution is to avoid prefetching by adding a
SYNC command when smmu mapping a iova. But the performance of nic has a
sharp drop. Then we do this workaround, always enable tx bounce buffer,
avoid mapping/unmapping on TX path.
This issue only affects HNS3, so we always enable
tx bounce buffer when smmu enabled to improve performance.
Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Changes the leadtek-ltk050h3146w panel to use multi style functions for
improved error handling.
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241026035928.183454-1-tejasvipin76@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241026035928.183454-1-tejasvipin76@gmail.com
|
|
The way of implementing a flip option follows the existing
panel-samsung-s6e8aa0.c [1][2][3].
The value to flip the screen is taken from a downstream kernel file of
a similar but older panel [4]. The mipi clock [5] for the new panel
samsung-s6e88a0-ams427ap24 matches 461 MHz and a hardware read-out of the
0xcb values corresponds to revision R01 of that older panel [6]. Although
for samsung-s6e88a0-ams427ap24 that's in non-flipped state while in this
older driver it seems to be the other way around. Further up there is a
hint [7] basically saying for revision R01 to change the first word of the
0xcb command from 0x06 to 0x0e, which is actually setting BIT(3) of that
word. This causes a horizontal flip.
[1] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L103
[2] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L207-L211
[3] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L954-L974
[4] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c
[5] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L2027-L2028
[6] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L137-L151
[7] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L66-L74
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/1491f275e9956b2da1f1e2580abd54f4e459c7d2.1730070570.git.jahau@rocketmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1491f275e9956b2da1f1e2580abd54f4e459c7d2.1730070570.git.jahau@rocketmail.com
|
|
The tables for brightness to candela, aid and elvss were taken from downstream
kernel file "dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi" [1][2][3].
The gamma table gets generated in "ss_dsi_smart_dimming_S6E88A0_AMS427AP24.c" [4]
with hard-coded starting values. The function smart_dimming_init() [5] goes
through the v{*}_adjustments, generate_gray_scale and gamma_init procedure.
Instead of calculating it manually, it's easier to compile a custom downstream
kernel with SMART_DIMMING_DEBUG enabled and read out dmesg early at boot.
Selection of the values for aid and elvss are again according to downstream
file "dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi" [6][7].
The set of write commands is guided by downstream file "ss_dsi_panel_common.c" [8]
followed by "ss_dsi_panel_S6E88A0_AMS427AP24.c" [9].
The dsi mode flag MIPI_DSI_MODE_VIDEO_NO_HFP prevents screen flickering while
changing the brightness.
[1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L341-L397
[2] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L214-L254
[3] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L301-L320
[4] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/ss_dsi_smart_dimming_S6E88A0_AMS427AP24.c
[5] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/ss_dsi_smart_dimming_S6E88A0_AMS427AP24.c#L1816-L1900
[6] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L256-L268
[7] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L322-L334
[8] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/ss_dsi_panel_common.c#L1389-L1517
[9] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/ss_dsi_panel_S6E88A0_AMS427AP24.c#L666-L678
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/30c154954a4e0f75d90f6ef6f393a5ba8b3ffea9.1730070570.git.jahau@rocketmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/30c154954a4e0f75d90f6ef6f393a5ba8b3ffea9.1730070570.git.jahau@rocketmail.com
|
|
This initial part of the panel driver was mostly generated by the
"linux-mdss-dsi-panel-driver-generator" tool [1], reading downstream
Android kernel file "dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi" [2].
On top of the generic output of the tool, there were a couple of changes
applied:
- Added mipi_dsi_dcs_set_display_on() to function s6e88a0_ams427ap24_on(),
otherwise the display does not show up.
- In functions s6e88a0_ams427ap24_on() and s6e88a0_ams427ap24_off()
changed DSI commands to multi context and used "accum_err" returns.
- In functions s6e88a0_ams427ap24_on() and s6e88a0_ams427ap24_off() replaced
msleep() by mipi_dsi_msleep().
- The function s6e88a0_ams427ap24_get_modes() was changed to make use of
drm_connector_helper_get_modes_fixed(). This also required to include
drm/drm_probe_helper.h.
- In function s6e88a0_ams427ap24_probe() registring the regulators was changed
to devm_regulator_bulk_get_const(). This required to change supplies in struct
s6e88a0_ams427ap24 to a pointer.
- Removed bool "prepared" from struct s6e88a0_ams427ap24 and according parts in
functions s6e88a0_ams427ap24_prepare() and s6e88a0_ams427ap24_unprepare().
- Removed include <linux/of.h>, it's not needed.
- Added comments to the mipi_dsi_dcs_write_seq_multi() lines in function
s6e88a0_ams427ap24_on().
[1] https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator
[2] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/d92ef0036b66520bb6d1ec908165e776cf30c303.1730070570.git.jahau@rocketmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/d92ef0036b66520bb6d1ec908165e776cf30c303.1730070570.git.jahau@rocketmail.com
|
|
modprobe drm_hdmi_state_helper_test and then rmmod it, the following
memory leak occurs.
The `mode` allocated in drm_mode_duplicate() called by
drm_display_mode_from_cea_vic() is not freed, which cause the memory leak:
unreferenced object 0xffffff80ccd18100 (size 128):
comm "kunit_try_catch", pid 1851, jiffies 4295059695
hex dump (first 32 bytes):
57 62 00 00 80 02 90 02 f0 02 20 03 00 00 e0 01 Wb........ .....
ea 01 ec 01 0d 02 00 00 0a 00 00 00 00 00 00 00 ................
backtrace (crc c2f1aa95):
[<000000000f10b11b>] kmemleak_alloc+0x34/0x40
[<000000001cd4cf73>] __kmalloc_cache_noprof+0x26c/0x2f4
[<00000000f1f3cffa>] drm_mode_duplicate+0x44/0x19c
[<000000008cbeef13>] drm_display_mode_from_cea_vic+0x88/0x98
[<0000000019daaacf>] 0xffffffedc11ae69c
[<000000000aad0f85>] kunit_try_run_case+0x13c/0x3ac
[<00000000a9210bac>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000000a0b2e9e>] kthread+0x2e8/0x374
[<00000000bd668858>] ret_from_fork+0x10/0x20
......
Free `mode` by using drm_kunit_display_mode_from_cea_vic()
to fix it.
Cc: stable@vger.kernel.org
Fixes: 4af70f19e559 ("drm/tests: Add RGB Quantization tests")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-4-ruanjinjie@huawei.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
modprobe drm_connector_test and then rmmod drm_connector_test,
the following memory leak occurs.
The `mode` allocated in drm_mode_duplicate() called by
drm_display_mode_from_cea_vic() is not freed, which cause the memory leak:
unreferenced object 0xffffff80cb0ee400 (size 128):
comm "kunit_try_catch", pid 1948, jiffies 4294950339
hex dump (first 32 bytes):
14 44 02 00 80 07 d8 07 04 08 98 08 00 00 38 04 .D............8.
3c 04 41 04 65 04 00 00 05 00 00 00 00 00 00 00 <.A.e...........
backtrace (crc 90e9585c):
[<00000000ec42e3d7>] kmemleak_alloc+0x34/0x40
[<00000000d0ef055a>] __kmalloc_cache_noprof+0x26c/0x2f4
[<00000000c2062161>] drm_mode_duplicate+0x44/0x19c
[<00000000f96c74aa>] drm_display_mode_from_cea_vic+0x88/0x98
[<00000000d8f2c8b4>] 0xffffffdc982a4868
[<000000005d164dbc>] kunit_try_run_case+0x13c/0x3ac
[<000000006fb23398>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000006ea56ca0>] kthread+0x2e8/0x374
[<000000000676063f>] ret_from_fork+0x10/0x20
......
Free `mode` by using drm_kunit_display_mode_from_cea_vic()
to fix it.
Cc: stable@vger.kernel.org
Fixes: abb6f74973e2 ("drm/tests: Add HDMI TDMS character rate tests")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-3-ruanjinjie@huawei.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
As Maxime suggested, add a new helper
drm_kunit_display_mode_from_cea_vic(), it can replace the direct call
of drm_display_mode_from_cea_vic(), and it will help solving
the `mode` memory leaks.
Acked-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-2-ruanjinjie@huawei.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
linux-firmware commit 808cba84 ("mtk_wed: add firmware for mt7988
Wireless Ethernet Dispatcher") added mt7988_wo_{0,1}.bin in the
'mediatek/mt7988' directory while driver current expects the files in
the 'mediatek' directory.
Change path in the driver header now that the firmware has been added.
Fixes: e2f64db13aa1 ("net: ethernet: mtk_wed: introduce WED support for MT7988")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/Zxz0GWTR5X5LdWPe@pidgin.makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device stores IPv6 addresses that are used for encapsulation in
linear memory that is managed by the driver.
Changing the remote address of an ip6gre net device never worked
properly, but since cited commit the following reproducer [1] would
result in a warning [2] and a memory leak [3]. The problem is that the
new remote address is never added by the driver to its hash table (and
therefore the device) and the old address is never removed from it.
Fix by programming the new address when the configuration of the ip6gre
net device changes and removing the old one. If the address did not
change, then the above would result in increasing the reference count of
the address and then decreasing it.
[1]
# ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit
# ip link set dev bla type ip6gre remote 2001:db8:3::1
# ip link del dev bla
# devlink dev reload pci/0000:01:00.0
[2]
WARNING: CPU: 0 PID: 1682 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3002 mlxsw_sp_ipv6_addr_put+0x140/0x1d0
Modules linked in:
CPU: 0 UID: 0 PID: 1682 Comm: ip Not tainted 6.12.0-rc3-custom-g86b5b55bc835 #151
Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x140/0x1d0
[...]
Call Trace:
<TASK>
mlxsw_sp_router_netdevice_event+0x55f/0x1240
notifier_call_chain+0x5a/0xd0
call_netdevice_notifiers_info+0x39/0x90
unregister_netdevice_many_notify+0x63e/0x9d0
rtnl_dellink+0x16b/0x3a0
rtnetlink_rcv_msg+0x142/0x3f0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x242/0x390
netlink_sendmsg+0x1de/0x420
____sys_sendmsg+0x2bd/0x320
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xd0
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[3]
unreferenced object 0xffff898081f597a0 (size 32):
comm "ip", pid 1626, jiffies 4294719324
hex dump (first 32 bytes):
20 01 0d b8 00 02 00 00 00 00 00 00 00 00 00 01 ...............
21 49 61 83 80 89 ff ff 00 00 00 00 01 00 00 00 !Ia.............
backtrace (crc fd9be911):
[<00000000df89c55d>] __kmalloc_cache_noprof+0x1da/0x260
[<00000000ff2a1ddb>] mlxsw_sp_ipv6_addr_kvdl_index_get+0x281/0x340
[<000000009ddd445d>] mlxsw_sp_router_netdevice_event+0x47b/0x1240
[<00000000743e7757>] notifier_call_chain+0x5a/0xd0
[<000000007c7b9e13>] call_netdevice_notifiers_info+0x39/0x90
[<000000002509645d>] register_netdevice+0x5f7/0x7a0
[<00000000c2e7d2a9>] ip6gre_newlink_common.isra.0+0x65/0x130
[<0000000087cd6d8d>] ip6gre_newlink+0x72/0x120
[<000000004df7c7cc>] rtnl_newlink+0x471/0xa20
[<0000000057ed632a>] rtnetlink_rcv_msg+0x142/0x3f0
[<0000000032e0d5b5>] netlink_rcv_skb+0x50/0x100
[<00000000908bca63>] netlink_unicast+0x242/0x390
[<00000000cdbe1c87>] netlink_sendmsg+0x1de/0x420
[<0000000011db153e>] ____sys_sendmsg+0x2bd/0x320
[<000000003b6d53eb>] ___sys_sendmsg+0x9a/0xe0
[<00000000cae27c62>] __sys_sendmsg+0x7a/0xd0
Fixes: cf42911523e0 ("mlxsw: spectrum_ipip: Use common hash table for IPv6 address mapping")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/e91012edc5a6cb9df37b78fd377f669381facfcb.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
