| Age | Commit message (Collapse) | Author |
|---|
|
Currently, in Spectrum-2 and above, time stamps are extracted from the CQE
into the time stamp fields in 'struct mlxsw_skb_cb', only when the CQE
time stamp type is UTC. The time stamps are read directly from the CQE and
software can get the time stamp in UTC format using CQEv2.
From Spectrum-4, the time stamps that are read from the CQE are allowed
to be also from MIRROR_UTC type.
Therefore, we get a warning [1] from the driver that the time stamp fields
were not set, when LLDP control packet is sent.
Allow the time stamp type to be MIRROR_UTC and set the time stamp in this
case as well.
[1]
WARNING: CPU: 11 PID: 0 at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:1409 mlxsw_sp2_ptp_hwtstamp_fill+0x1f/0x70 [mlxsw_spectrum]
[...]
Call Trace:
<IRQ>
mlxsw_sp2_ptp_receive+0x3c/0x80 [mlxsw_spectrum]
mlxsw_core_skb_receive+0x119/0x190 [mlxsw_core]
mlxsw_pci_cq_tasklet+0x3c9/0x780 [mlxsw_pci]
tasklet_action_common.constprop.0+0x9f/0x110
__do_softirq+0xbb/0x296
irq_exit_rcu+0x79/0xa0
common_interrupt+0x86/0xa0
</IRQ>
<TASK>
Fixes: 4735402173e6 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/bcef4d044ef608a4e258d33a7ec0ecd91f480db5.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 5d93cfcf7360 ("net: dpaa: Convert to phylink") removed
fman_set_mac_active_pause()/fman_get_pause_cfg() but not declarations.
Commit 48257c4f168e ("Add fs_enet ethernet network driver, for several
embedded platforms.") declared but never implemented
fs_enet_platform_init() and fs_enet_platform_cleanup().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230817134159.38484-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are two network devices(veth1 and veth3) in ns1, and ipvlan1 with
L3S mode and ipvlan2 with L2 mode are created based on them as
figure (1). In this case, ipvlan_register_nf_hook() will be called to
register nf hook which is needed by ipvlans in L3S mode in ns1 and value
of ipvl_nf_hook_refcnt is set to 1.
(1)
ns1 ns2
------------ ------------
veth1--ipvlan1 (L3S)
veth3--ipvlan2 (L2)
(2)
ns1 ns2
------------ ------------
veth1--ipvlan1 (L3S)
ipvlan2 (L2) veth3
| |
|------->-------->--------->--------
migrate
When veth3 migrates from ns1 to ns2 as figure (2), veth3 will register in
ns2 and calls call_netdevice_notifiers with NETDEV_REGISTER event:
dev_change_net_namespace
call_netdevice_notifiers
ipvlan_device_event
ipvlan_migrate_l3s_hook
ipvlan_register_nf_hook(newnet) (I)
ipvlan_unregister_nf_hook(oldnet) (II)
In function ipvlan_migrate_l3s_hook(), ipvl_nf_hook_refcnt in ns1 is not 0
since veth1 with ipvlan1 still in ns1, (I) and (II) will be called to
register nf_hook in ns2 and unregister nf_hook in ns1. As a result,
ipvl_nf_hook_refcnt in ns1 is decreased incorrectly and this in ns2
is increased incorrectly. When the second net namespace is removed, a
reference count leak warning in ipvlan_ns_exit() will be triggered.
This patch add a check before ipvlan_migrate_l3s_hook() is called. The
warning can be triggered as follows:
$ ip netns add ns1
$ ip netns add ns2
$ ip netns exec ns1 ip link add veth1 type veth peer name veth2
$ ip netns exec ns1 ip link add veth3 type veth peer name veth4
$ ip netns exec ns1 ip link add ipv1 link veth1 type ipvlan mode l3s
$ ip netns exec ns1 ip link add ipv2 link veth3 type ipvlan mode l2
$ ip netns exec ns1 ip link set veth3 netns ns2
$ ip net del ns2
Fixes: 3133822f5ac1 ("ipvlan: use pernet operations and restrict l3s hooks to master netns")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230817145449.141827-1-luwei32@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new tx_resets ring counter. This counter will be saved as
tx_total_resets across any reset. Since we currently do a full reset
in bnxt_sched_reset_txr(), the per ring counter will always be cleared
during reset. Only the tx_total_resets count will be meaningful and we
only display this under ethtool -S.
Link: https://lore.kernel.org/netdev/CACKFLimD-bKmJ1tGZOLYRjWzEwxkri-Mw7iFme1x2Dr0twdCeg@mail.gmail.com/
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230817231911.165035-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The existing driver displays the sum of 4 ring counters under ethtool -S.
These counters are in the array bnxt_sw_func_stats. These counters are
summed at the time of ethtool -S and will be lost when the device is reset.
Replace these counters with the new total ring error counters added in the
last patch. These new counters are saved before reset. ethtool -S will
now display the sum of the saved counters plus the current counters.
Link: https://lore.kernel.org/netdev/CACKFLimD-bKmJ1tGZOLYRjWzEwxkri-Mw7iFme1x2Dr0twdCeg@mail.gmail.com/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230817231911.165035-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the ring counters are stored in the per ring datastructure.
During reset, all the rings are freed together with the associated
datastructures. As a result, all the ring error counters will be reset
to zero.
Add logic to keep track of the total error counts of all the rings
and save them before reset (including ifdown). The next patch will
display these total ring error counters under ethtool -S.
Link: https://lore.kernel.org/netdev/CACKFLimD-bKmJ1tGZOLYRjWzEwxkri-Mw7iFme1x2Dr0twdCeg@mail.gmail.com/
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230817231911.165035-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we are doing a complete reset with irq_re_init set to true in
bnxt_close_nic(), all the ring structures will be freed. New
structures will be allocated in bnxt_open_nic(). The current code
increments rx_resets counter in bnxt_enable_napi() if bnapi->in_reset
is true. In a complete reset, bnapi->in_reset will never be true
since the structure is just allocated.
Increment the rx_resets counter in bnxt_disable_napi() instead. This
will allow us to save all the ring error counters including the
rx_resets counters in the next patch.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230817231911.165035-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the page pool's ability to maintain DMA mappings for us.
This avoids re-mapping of the recycled pages.
Link: https://lore.kernel.org/netdev/20230728231829.235716-4-michael.chan@broadcom.com/
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230817231911.165035-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert to use the page pool buffers for the aggregation ring when
running in non-XDP mode. This simplifies the driver and we benefit
from the recycling of pages. Adjust the page pool size to account
for the aggregation ring size.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230817231911.165035-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-17 (ice)
This series contains updates to ice driver only.
Jan removes unused functions and refactors code to make, possible,
functions static.
Jake rearranges some functions to be logically grouped.
Marcin removes an unnecessary call to disable VLAN stripping.
Yang Yingliang utilizes list_for_each_entry() helper for a couple list
traversals.
Przemek removes some parameters from ice_aq_alloc_free_res() which were
always the same and reworks ice_aq_wait_for_event() to reduce chance of
race.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: split ice_aq_wait_for_event() func into two
ice: embed &ice_rq_event_info event into struct ice_aq_task
ice: ice_aq_check_events: fix off-by-one check when filling buffer
ice: drop two params from ice_aq_alloc_free_res()
ice: use list_for_each_entry() helper
ice: Remove redundant VSI configuration in eswitch setup
ice: move E810T functions to before device agnostic ones
ice: refactor ice_vsi_is_vlan_pruning_ena
ice: refactor ice_ptp_hw to make functions static
ice: refactor ice_sched to make functions static
ice: Utilize assign_bit() helper
ice: refactor ice_vf_lib to make functions static
ice: refactor ice_lib to make functions static
ice: refactor ice_ddp to make functions static
ice: remove unused methods
====================
Link: https://lore.kernel.org/r/20230817212239.2601543-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The blamed commit resolved a bug where frames would still get stuck at
egress, even though they're smaller than the maxSDU[tc], because the
driver did not take into account the extra 33 ns that the queue system
needs for scheduling the frame.
It now takes that into account, but the arithmetic that we perform in
vsc9959_tas_remaining_gate_len_ps() is buggy, because we operate on
64-bit unsigned integers, so gate_len_ns - VSC9959_TAS_MIN_GATE_LEN_NS
may become a very large integer if gate_len_ns < 33 ns.
In practice, this means that we've introduced a regression where all
traffic class gates which are permanently closed will not get detected
by the driver, and we won't enable oversize frame dropping for them.
Before:
mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000
mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 1 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 2 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 3 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 4 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 5 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 6 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS
After:
mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000
mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS
Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230817120111.3522827-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Return PTR_ERR_OR_ZERO() instead of return 0 or PTR_ERR() to
simplify code.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230817022418.3588831-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since debugfs_create_dir() returns ERR_PTR, IS_ERR() is enough to
check whether the directory is successfully created. So remove the
redundant NULL check.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230817073017.350002-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On SDP interfaces, frame oversize and undersize errors are
observed as driver is not considering packet sizes of all
subscribers of the link before updating the link config.
This patch fixes the same.
Fixes: 9b7dd87ac071 ("octeontx2-af: Support to modify min/max allowed packet lengths")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230817063006.10366-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
do_pci_disable_device() disable PCI bus-mastering as following:
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}
And pci_disable_device() sets dev->is_busmaster to 0.
pci_enable_device() is called only once before calling to
pci_disable_device() and such pci_clear_master() is not needed. So remove
redundant pci_clear_master().
Also rename goto label 'err_out_clear_master' to 'err_out_disable_device'.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20230817025709.2023553-1-liaoyu15@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
virtchnl: fix fake 1-elem arrays
Alexander Lobakin says:
6.5-rc1 started spitting warning splats when composing virtchnl
messages, precisely on virtchnl_rss_key and virtchnl_lut:
[ 84.167709] memcpy: detected field-spanning write (size 52) of single
field "vrk->key" at drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1095
(size 1)
[ 84.169915] WARNING: CPU: 3 PID: 11 at drivers/net/ethernet/intel/
iavf/iavf_virtchnl.c:1095 iavf_set_rss_key+0x123/0x140 [iavf]
...
[ 84.191982] Call Trace:
[ 84.192439] <TASK>
[ 84.192900] ? __warn+0xc9/0x1a0
[ 84.193353] ? iavf_set_rss_key+0x123/0x140 [iavf]
[ 84.193818] ? report_bug+0x12c/0x1b0
[ 84.194266] ? handle_bug+0x42/0x70
[ 84.194714] ? exc_invalid_op+0x1a/0x50
[ 84.195149] ? asm_exc_invalid_op+0x1a/0x20
[ 84.195592] ? iavf_set_rss_key+0x123/0x140 [iavf]
[ 84.196033] iavf_watchdog_task+0xb0c/0xe00 [iavf]
...
[ 84.225476] memcpy: detected field-spanning write (size 64) of single
field "vrl->lut" at drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1127
(size 1)
[ 84.227190] WARNING: CPU: 27 PID: 1044 at drivers/net/ethernet/intel/
iavf/iavf_virtchnl.c:1127 iavf_set_rss_lut+0x123/0x140 [iavf]
...
[ 84.246601] Call Trace:
[ 84.247228] <TASK>
[ 84.247840] ? __warn+0xc9/0x1a0
[ 84.248263] ? iavf_set_rss_lut+0x123/0x140 [iavf]
[ 84.248698] ? report_bug+0x12c/0x1b0
[ 84.249122] ? handle_bug+0x42/0x70
[ 84.249549] ? exc_invalid_op+0x1a/0x50
[ 84.249970] ? asm_exc_invalid_op+0x1a/0x20
[ 84.250390] ? iavf_set_rss_lut+0x123/0x140 [iavf]
[ 84.250820] iavf_watchdog_task+0xb16/0xe00 [iavf]
Gustavo already tried to fix those back in 2021[0][1]. Unfortunately,
a VM can run a different kernel than the host, meaning that those
structures are sorta ABI.
However, it is possible to have proper flex arrays + struct_size()
calculations and still send the very same messages with the same sizes.
The common rule is:
elem[1] -> elem[]
size = struct_size() + <difference between the old and the new msg size>
The "old" size in the current code is calculated 3 different ways for
10 virtchnl structures total. Each commit addresses one of the ways
cumulatively instead of per-structure.
I was planning to send it to -net initially, but given that virtchnl was
renamed from i40evf and got some fat style cleanup commits in the past,
it's not very straightforward to even pick appropriate SHAs, not
speaking of automatic portability. I may send manual backports for
a couple of the latest supported kernels later on if anyone needs it
at all.
[0] https://lore.kernel.org/all/20210525230912.GA175802@embeddedor
[1] https://lore.kernel.org/all/20210525231851.GA176647@embeddedor
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
virtchnl: fix fake 1-elem arrays for structures allocated as `nents`
virtchnl: fix fake 1-elem arrays in structures allocated as `nents + 1`
virtchnl: fix fake 1-elem arrays in structs allocated as `nents + 1` - 1
====================
Link: https://lore.kernel.org/r/20230816210657.1326772-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the "budget" is passed into fec_enet_tx_queue(), one
optimization we can do is to use napi_consume_skb() to instead
of dev_kfree_skb_any().
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Alexander H Duyck <alexander.duyck@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230816090242.463822-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
./drivers/net/ethernet/sfc/tc_conntrack.c:464:2-3: Unneeded semicolon
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230816004944.10841-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
This patch chain adds support for the Cirrus Logic cs42l43 PC focused
SoundWire CODEC.
|
|
Some configurations differ between chip variants, e,g. the register
to control the on of state of LDOA1 and SWB2. Thus, it is necessary
to choose the correct configuration for a dedicated device.
If the wrong configuration was used, the LDOA1 output that was
disabled by the bootloader was enabled in Kernel again.
Each chip variant gets its dedicated configuration selected by
the chip ID previously collected from MFD probe function.
The VTT enum value (tps65086_regulators) is shifted because not all
chip variants have a separate SWB2 switch. Sometimes they are merged.
So the configuration possibilities differ, thus the regulator
configuration arrays have a different length.
Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20230818083721.29790-5-andre.werner@systec-electronic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge Lee Jones' tag 'ib-mfd-regulator-v6.6' of
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
into 20230818204514.GA1380343@google.com so we can build the tps65086
support:
Immutable branch between MFD and Regulator due for the v6.6 merge window
|
|
Commit 137380c0ec40 renamed 'rnbd-client' to 'rnbd_client', this changed
sysfs interface to /sys/devices/virtual/rnbd_client/ctl/map_device
from /sys/devices/virtual/rnbd-client/ctl/map_device.
CC: Ivan Orlov <ivan.orlov0322@gmail.com>
CC: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
CC: Jack Wang <jinpu.wang@ionos.com>
Fixes: 137380c0ec40 ("block/rnbd: make all 'class' structures const")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230816022210.2501228-1-lizhijian@fujitsu.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This commit prepares a following commit for the regulator part of the MFD.
The driver should support different device chips that differ in their
register definitions, for instance to control LDOA1 and SWB2.
So it is necessary to use a dedicated regulator description for a
specific device variant. Thus, the content from DEVICEID Register 1 is
used to choose a dedicated configuration between the different device
variants.
Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20230818083721.29790-2-andre.werner@systec-electronic.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e194997 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88ada ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a regression in the sysfs interface
- fix a reference counting bug that's been around for years
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: fix reference leaks when removing GPIO chips still in use
gpiolib: sysfs: Do unexport GPIO when user asks for it
MAINTAINERS: add content regex for gpio-regmap
|
|
abs_diff() belongs to math.h. Move it there. This will allow others to
use it.
[andriy.shevchenko@linux.intel.com: add abs_diff() documentation]
Link: https://lkml.kernel.org/r/20230804050934.83223-1-andriy.shevchenko@linux.intel.com
[akpm@linux-foundation.org: fix comment, per Randy]
Link: https://lkml.kernel.org/r/20230803131918.53727-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org> # tty/serial
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> # gpu/ipu-v3
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common than
PCI devices. Hence it could have a fully functional s390 kernel with
CONFIG_PCI=n, then the relevant iomem mapping functions [including
ioremap(), devm_ioremap(), etc.] are not available.
Here let AL_FIC depend on HAS_IOMEM so that it won't be built
to cause below compiling error if PCI is unset:
------
ld: drivers/irqchip/irq-al-fic.o: in function `al_fic_init_dt':
irq-al-fic.c:(.init.text+0x76): undefined reference to `of_iomap'
ld: irq-al-fic.c:(.init.text+0x4ce): undefined reference to `iounmap'
------
Link: https://lkml.kernel.org/r/20230707135852.24292-7-bhe@redhat.com
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common than
PCI devices. Hence it could have a fully functional s390 kernel with
CONFIG_PCI=n, then the relevant iomem mapping functions [including
ioremap(), devm_ioremap(), etc.] are not available.
Here let ALTERA_TSE depend on HAS_IOMEM so that it won't be built to cause
below compiling error if PCI is unset:
------
ERROR: modpost: "devm_ioremap" [drivers/net/ethernet/altera/altera_tse.ko] undefined!
------
Link: https://lkml.kernel.org/r/20230707135852.24292-6-bhe@redhat.com
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Joyce Ooi <joyce.ooi@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
support
Patch series "Add support for DAX vmemmap optimization for ppc64", v6.
This patch series implements changes required to support DAX vmemmap
optimization for ppc64. The vmemmap optimization is only enabled with
radix MMU translation and 1GB PUD mapping with 64K page size.
The patch series also splits the hugetlb vmemmap optimization as a
separate Kconfig variable so that architectures can enable DAX vmemmap
optimization without enabling hugetlb vmemmap optimization. This should
enable architectures like arm64 to enable DAX vmemmap optimization while
they can't enable hugetlb vmemmap optimization. More details of the same
are in patch "mm/vmemmap optimization: Split hugetlb and devdax vmemmap
optimization".
With 64K page size for 16384 pages added (1G) we save 14 pages
With 4K page size for 262144 pages added (1G) we save 4094 pages
With 4K page size for 512 pages added (2M) we save 6 pages
This patch (of 13):
Architectures like powerpc would like to enable transparent huge page pud
support only with radix translation. To support that add
has_transparent_pud_hugepage() helper that architectures can override.
[aneesh.kumar@linux.ibm.com: use the new has_transparent_pud_hugepage()]
Link: https://lkml.kernel.org/r/87tttrvtaj.fsf@linux.ibm.com
Link: https://lkml.kernel.org/r/20230724190759.483013-1-aneesh.kumar@linux.ibm.com
Link: https://lkml.kernel.org/r/20230724190759.483013-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are two main use cases for mmu notifiers. One is by KVM which uses
mmu_notifier_invalidate_range_start()/end() to manage a software TLB.
The other is to manage hardware TLBs which need to use the
invalidate_range() callback because HW can establish new TLB entries at
any time. Hence using start/end() can lead to memory corruption as these
callbacks happen too soon/late during page unmap.
mmu notifier users should therefore either use the start()/end() callbacks
or the invalidate_range() callbacks. To make this usage clearer rename
the invalidate_range() callback to arch_invalidate_secondary_tlbs() and
update documention.
Link: https://lkml.kernel.org/r/6f77248cd25545c8020a54b4e567e8b72be4dca1.1690292440.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolin Chen <nicolinc@nvidia.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zhi Wang <zhi.wang.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Invalidate secondary IOMMU TLB on permission upgrade", v4.
The main change is to move secondary TLB invalidation mmu notifier
callbacks into the architecture specific TLB flushing functions. This
makes secondary TLB invalidation mostly match CPU invalidation while
still allowing efficient range based invalidations based on the
existing TLB batching code.
This patch (of 5):
The ARM SMMU has a specific command for invalidating the TLB for an entire
ASID. Currently this is used for the IO_PGTABLE API but not for ATS when
called from the MMU notifier.
The current implementation of notifiers does not attempt to invalidate
such a large address range, instead walking each VMA and invalidating each
range individually during mmap removal. However in future SMMU TLB
invalidations are going to be sent as part of the normal flush_tlb_*()
kernel calls. To better deal with that add handling to use TLBI ASID when
invalidating the entire address space.
Link: https://lkml.kernel.org/r/cover.1eca029b8603ef4eebe5b41eae51facfc5920c41.1690292440.git-series.apopple@nvidia.com
Link: https://lkml.kernel.org/r/ba5f0ec5fbc2ab188797524d3687e075e2412a2b.1690292440.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolin Chen <nicolinc@nvidia.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zhi Wang <zhi.wang.linux@gmail.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: ioremap: Convert architectures to take GENERIC_IOREMAP
way", v8.
Motivation and implementation:
==============================
Currently, many architecutres have't taken the standard GENERIC_IOREMAP
way to implement ioremap_prot(), iounmap(), and ioremap_xx(), but make
these functions specifically under each arch's folder. Those cause many
duplicated code of ioremap() and iounmap().
In this patchset, firstly introduce generic_ioremap_prot() and
generic_iounmap() to extract the generic code for GENERIC_IOREMAP. By
taking GENERIC_IOREMAP method, the generic generic_ioremap_prot(),
generic_iounmap(), and their generic wrapper ioremap_prot(), ioremap() and
iounmap() are all visible and available to arch. Arch needs to provide
wrapper functions to override the generic version if there's arch specific
handling in its corresponding ioremap_prot(), ioremap() or iounmap().
With these changes, duplicated ioremap/iounmap() code uder ARCH-es are
removed, and the equivalent functioality is kept as before.
Background info:
================
1) The converting more architectures to take GENERIC_IOREMAP way is
suggested by Christoph in below discussion:
https://lore.kernel.org/all/Yp7h0Jv6vpgt6xdZ@infradead.org/T/#u
2) In the previous v1 to v3, it's basically further action after arm64
has converted to GENERIC_IOREMAP way in below patchset. It's done by
adding hook ioremap_allowed() and iounmap_allowed() in ARCH to add ARCH
specific handling the middle of ioremap_prot() and iounmap().
[PATCH v5 0/6] arm64: Cleanup ioremap() and support ioremap_prot()
https://lore.kernel.org/all/20220607125027.44946-1-wangkefeng.wang@huawei.com/T/#u
Later, during v3 reviewing, Christophe Leroy suggested to introduce
generic_ioremap_prot() and generic_iounmap() to generic codes, and ARCH
can provide wrapper function ioremap_prot(), ioremap() or iounmap() if
needed. Christophe made a RFC patchset as below to specially demonstrate
his idea. This is what v4 and now v5 is doing.
[RFC PATCH 0/8] mm: ioremap: Convert architectures to take GENERIC_IOREMAP way
https://lore.kernel.org/all/cover.1665568707.git.christophe.leroy@csgroup.eu/T/#u
Testing:
========
In v8, I only applied this patchset onto the latest linus's tree to build
and run on arm64 and s390.
This patch (of 19):
Let's use '#define ioremap_xx' and "#ifdef ioremap_xx" instead.
To remove defined ARCH_HAS_IOREMAP_xx macros in <asm/io.h> of each ARCH,
the ARCH's own ioremap_wc|wt|np definition need be above "#include
<asm-generic/iomap.h>. Otherwise the redefinition error would be seen
during compiling. So the relevant adjustments are made to avoid compiling
error:
loongarch:
- doesn't include <asm-generic/iomap.h>, defining ARCH_HAS_IOREMAP_WC
is redundant, so simply remove it.
m68k:
- selected GENERIC_IOMAP, <asm-generic/iomap.h> has been added in
<asm-generic/io.h>, and <asm/kmap.h> is included above
<asm-generic/iomap.h>, so simply remove ARCH_HAS_IOREMAP_WT defining.
mips:
- move "#include <asm-generic/iomap.h>" below ioremap_wc definition
in <asm/io.h>
powerpc:
- remove "#include <asm-generic/iomap.h>" in <asm/io.h> because it's
duplicated with the one in <asm-generic/io.h>, let's rely on the
latter.
x86:
- selected GENERIC_IOMAP, remove #include <asm-generic/iomap.h> in
the middle of <asm/io.h>. Let's rely on <asm-generic/io.h>.
Link: https://lkml.kernel.org/r/20230706154520.11257-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Helge Deller <deller@gmx.de>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It appears that destroy_memory_type() isn't a very good name because we
usually will not free the memory_type here. So rename it to a more
appropriate name i.e. put_memory_type().
Link: https://lkml.kernel.org/r/20230706063905.543800-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: Huang, Ying <ying.huang@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Xiao Yang <yangx.jy@fujitsu.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers of show_mem() pass 0 and NULL, so we can remove the two
arguments by directly calling __show_mem(0, NULL, MAX_NR_ZONES - 1) in
show_mem().
Link: https://lkml.kernel.org/r/20230630062253.189440-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix in_flight[issue_type] value error to properly manage requests
MMC host:
- wbsd: Fix double free in the probe error path
- sunplus: Fix error path in probe
- sdhci_f_sdh30: Fix order of function calls in sdhci_f_sdh30_remove"
* tag 'mmc-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: f-sdh30: fix order of function calls in sdhci_f_sdh30_remove
mmc: sunplus: Fix error handling in spmmc_drv_probe()
mmc: sunplus: fix return value check of mmc_add_host()
mmc: wbsd: fix double mmc_free_host() in wbsd_init()
mmc: block: Fix in_flight[issue_type] value error
|
|
ACPI TRBE does not have a HID for identification which could create and add
a platform device into the platform bus. Also without a platform device, it
cannot be probed and bound to a platform driver.
This creates a dummy platform device for TRBE after ascertaining that ACPI
provides required interrupts uniformly across all cpus on the system. This
device gets created inside drivers/perf/arm_pmu_acpi.c to accommodate TRBE
being built as a module.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230817055405.249630-3-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Sanity checking all the GICC tables for same interrupt number, and ensuring
a homogeneous ACPI based machine, could be used for other platform devices
as well. Hence this refactors arm_spe_acpi_register_device() into a common
helper arm_acpi_register_pmu_device().
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Co-developed-by: Will Deacon <will@kernel.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230817055405.249630-2-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
and fix all in-tree references.
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230717192456.453124-1-costa.shul@redhat.com
|
|
The code calling ima_free_kexec_buffer runs long after the memblock
allocator has already been torn down, potentially resulting in a use
after free in memblock_isolate_range.
With KASAN or KFENCE, this use after free will result in a BUG
from the idle task, and a subsequent kernel panic.
Switch ima_free_kexec_buffer over to memblock_free_late to avoid
that issue.
Fixes: fee3ff99bc67 ("powerpc: Move arch independent ima kexec functions to drivers/of/kexec.c")
Cc: stable@kernel.org
Signed-off-by: Rik van Riel <riel@surriel.com>
Suggested-by: Mike Rappoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/20230817135759.0888e5ef@imladris.surriel.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Cleaning up the driver to use pm_ptr() and *_PM_OPS() macros that
make it simpler and allows the compiler to remove those functions
if built without CONFIG_PM and CONFIG_PM_SLEEP support.
The lp_gpio_resume() is also assigned to .thaw and .restore members.
This is not a problem as the function it enables input pins that
had been disabled by firmware and repetion of that doesn't change
the pin configuration, i.e. it is idempotent.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20230717172821.62827-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
The SPI component incorporates a SPI controller interface for
communication with other peripheral components.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Fixes two issues with the Qualcomm SA8775P platform:
- Some minor device tree binding flunky that is nice to iron out but
more importantly:
- Support the increased interrupt targets mask from 3 to 4 bits,
making interrupts with higher (hardware) numbers work"
* tag 'pinctrl-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets
dt-bindings: pinctrl: qcom,sa8775p-tlmm: add gpio function constant
|
|
merge window
Merge tag 'ib-mfd-pinctrl-soundwire-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into tmp
Immutable branch between MFD, Pinctrl and soundwire due for the v6.6 merge window
|
|
Cleaning up the driver to use pm_ptr() and *_PM_OPS() macros that
make it simpler and allows the compiler to remove those functions
if built without CONFIG_PM and CONFIG_PM_SLEEP support.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20230717172821.62827-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"As usual, mostly DT fixes for the major Arm platforms from Qualcomm
and NXP, plus a bit for Rockchips and others:
The qualcomm fixes mainly deal with their higher-end arm64 devices
trees, fixing issues in L3 interconnect, crypto, thermal, UFS and a
regression for the DSI phy.
NXP i.MX has two correctness fixes for the 64-bit chips, dealing with
the imx93 "anatop" module and the CSI interface. On the 32-bit side,
there are functional fixes for RTC, display and SD card intefaces.
Rockchip fixes are for wifi support on certain boards, a eMMC
stability and DT build warnings.
On TI OMAP, a regulator is described in DT to avoid problems with the
ethernet phy initialization.
The code changes include a missing MMIO serialization on OMAP, plus a
few minor fixes on ASpeed and AMD/Zynq chips"
* tag 'soc-fixes-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
soc: aspeed: socinfo: Add kfree for kstrdup
soc: aspeed: uart-routing: Use __sysfs_match_string
ARM: dts: integrator: fix PCI bus dtc warnings
arm64: dts: imx93: Fix anatop node size
arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
ARM: dts: imx: Set default tuning step for imx6sx usdhc
arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration
arm64: dts: imx8mn: Drop CSI1 PHY reference clock configuration
ARM: dts: imx: Set default tuning step for imx7d usdhc
ARM: dts: imx6: phytec: fix RTC interrupt level
ARM: dts: imx6sx: Remove LDB endpoint
arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
ARM: zynq: Explicitly include correct DT includes
arm64: dts: qcom: sa8775p-ride: Update L4C parameters
arm64: dts: rockchip: minor whitespace cleanup around '='
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
arm64: dts: rockchip: add missing space before { on indiedroid nova
...
|
|
module
It should call platform_device_unregister() instead of
platform_device_del() to unregister and free the device.
Fixes: 23a1b46f15d5 ("iommufd/selftest: Make the mock iommu driver into a real driver")
Link: https://lore.kernel.org/r/20230816081318.1232865-1-yangyingliang@huawei.com
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add intel_iommu_hw_info() to report cap_reg and ecap_reg information.
Link: https://lore.kernel.org/r/20230818101033.4100-6-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add a mock_domain_hw_info function and an iommu_test_hw_info data
structure. This allows to test the IOMMU_GET_HW_INFO ioctl passing the
test_reg value for the mock_dev.
Link: https://lore.kernel.org/r/20230818101033.4100-5-yi.l.liu@intel.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Under nested IOMMU translation, userspace owns the stage-1 translation
table (e.g. the stage-1 page table of Intel VT-d or the context table of
ARM SMMUv3, and etc.). Stage-1 translation tables are vendor specific, and
need to be compatible with the underlying IOMMU hardware. Hence, userspace
should know the IOMMU hardware capability before creating and configuring
the stage-1 translation table to kernel.
This adds IOMMU_GET_HW_INFO ioctl to query the IOMMU hardware information
(a.k.a capability) for a given device. The returned data is vendor
specific, userspace needs to decode it with the structure by the output
@out_data_type field.
As only physical devices have IOMMU hardware, so this will return error if
the given device is not a physical device.
Link: https://lore.kernel.org/r/20230818101033.4100-4-yi.l.liu@intel.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Co-developed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
dev_iommu_ops() is essentially only used in iommu subsystem, so move to a
private header to avoid being abused by other drivers.
Link: https://lore.kernel.org/r/20230818101033.4100-2-yi.l.liu@intel.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
