| Age | Commit message (Collapse) | Author |
|---|
|
Introduce the first pedit set offload functionality for the sfc driver.
In addition to this, add offload functionality for both mac source and
destination pedit set actions.
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the initial ethernet pedit set action infrastructure in
preparation for adding mac src and dst pedit action offloads.
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add missing kernel-doc for pci_epc_mem_init() API.
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
|
|
For transfers below 4K, let's use iATU since using eDMA for such small
transfers is inefficient.
This is mainly because setting up an eDMA transfer and waiting for
completion adds some latency. This latency is negligible for large
transfers but not for the smaller ones.
With using iATU, there is an increase in ~50Mbps throughput on both MHI
UL (Uplink) and DL (Downlink) channels.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Add support for Qualcomm Snapdragon SM8450 SoC to the EPF driver. SM8450
has the dedicated PID (0x0306) and supports eDMA. Currently, it has no
fixed PCI class, so it is being advertised as "PCI_CLASS_OTHERS".
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Add support for Embedded DMA (eDMA) available in the DesignWare PCIe IP
to transfer the MHI buffers between the host and the endpoint. The eDMA
use helps achieve greater throughput as the transfers are offloaded from
CPUs.
For differentiating the iATU and eDMA APIs, the pci_epf_mhi_{read/write}
APIs are renamed to pci_epf_mhi_iatu_{read/write} and separate eDMA
specific APIs pci_epf_mhi_edma_{read/write} are introduced.
Platforms that require eDMA support can pass the MHI_EPF_USE_DMA flag
through pci_epf_mhi_ep_info.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Qualcomm PCIe Endpoint controllers have the in-built Embedded DMA (eDMA)
peripheral for offloading the data transfer between the PCIe bus and
memory.
Let's add support for it by enabling the eDMA IRQ in the driver. The
eDMA DMA Engine driver will handle the rest of the functionality.
Since the eDMA on Qualcomm platforms only uses a single IRQ for all
channels, use 1 for edma.nr_irqs.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Instead of hardcoding the alignment restriction in the EPF_MHI driver, make
use of the info available from the EPF core that reflects the alignment
restriction of the endpoint controller.
For this purpose, let's introduce the get_align_offset() static function.
[kwilczynski: update get_align_offset() to avoid issues on 32-bit architectures]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-3-manivannan.sadhasivam@linaro.org
Link: https://lore.kernel.org/linux-pci/20230826150626.23309-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
On systems that support slider notifications but don't otherwise support
granular slider the SPS cleanup path doesn't run.
This means that loading/unloading/loading leads to failures because
the sysfs files don't get setup properly when reloaded.
Add the missing cleanup path.
Fixes: 33c9ab5b493a ("platform/x86/amd/pmf: Notify OS power slider update")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230823185421.23959-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Connector class driver only configure cable type active or passive.
Configure if the cable type is retimer or redriver with this change.
This detail will be provided as a part of cable discover mode VDO.
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Acked-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20230718024703.1013367-2-utkarsh.h.patel@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Older PA-RISC machines have LEDs which show the disk- and LAN-activity.
The computation is done in software and takes quite some time, e.g. on a
J6500 this may take up to 60% time of one CPU if the machine is loaded
via network traffic.
Since most people don't care about the LEDs, start with LEDs disabled and
just show a CPU heartbeat LED. The disk and LAN LEDs can be turned on
manually via /proc/pdc/led.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-24 (igc, e1000e)
This series contains updates to igc and e1000e drivers.
Vinicius adds support for utilizing multiple PTP registers on igc.
Sasha reduces interval time for PTM on igc and adds new device support
on e1000e.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
e1000e: Add support for the next LOM generation
igc: Decrease PTM short interval from 10 us to 1 us
igc: Add support for multiple in-flight TX timestamps
====================
Link: https://lore.kernel.org/r/20230824204418.1551093-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Don't rely on the PCI memory for the devcmd opcode because we
read a 0xff value if the PCI bus is broken, which can cause us
to report a bogus dev_cmd opcode later.
Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-6-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a check that the wq exists before queuing up work for a
failed devcmd, as the PF is responsible for health and the VF
doesn't have a wq.
Fixes: c2dbb0904310 ("pds_core: health timer and workqueue")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-5-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VF doesn't need to send a reset command, and in a PCI reset
scenario it might not have a valid IO space to write to anyway.
Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure the health reporter is set up before we use it in
our devlink health updates, especially since the VF doesn't
set up the health reporter.
Fixes: 25b450c05a49 ("pds_core: add devlink health facilities")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Don't access structs that have been cleared when in the fw_down
state and the various structs have been cleaned and are waiting
to recover. This caused a panic on rmmod when already in fw_down
and devlink_param_unregister() tried to check the parameters.
Fixes: 40ced8944536 ("pds_core: devlink params for enabling VIF support")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Not all firmware variants support RSS filters. Do not fail all PTP
functionality when raw ethernet PTP filters fail to insert.
Fixes: e4616f64726b ("sfc: support PTP over Ethernet")
Signed-off-by: Alex Austin <alex.austin@amd.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20230824164657.42379-1-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than detecting when half-duplex is not supported, and clearing
the MAC capabilities, reverse the if() condition and use it to set the
capabilities instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZAXn-005pUb-SP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move priv->phylink_config.mac_managed_pm to be along side the other
phylink initialisations.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZAXi-005pUV-Nq@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the xgmac specific phylink capabilities to the dwxgmac2 support
core.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZAXd-005pUP-JL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the setup of gmac4 speicifc phylink capabilities into gmac4 code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZAXY-005pUJ-Ez@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow MACs to provide their own capabilities via the MAC operations
struct.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZAXT-005pUD-Aj@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use phylink_limit_mac_speed() to limit the MAC capabilities rather
than coding this for each speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZAXO-005pU7-61@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have a local variable for priv->plat->mdio_bus_data, which we use
later in the conditional if() block, but we evaluate the above within
the conditional expression. Use mdio_bus_data instead. Since these
will be the only two users of this local variable, move its assignment
just before the if().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZAXJ-005pU1-1z@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the initialisation of the fwnode variable closer to its use
site, rather than scattered throughout stmmac_phy_setup().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZAXD-005pTv-TN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All users of plat->phylink_node first convert it to a fwnode. Rather
than repeatedly convert to a fwnode, store it as a fwnode. To reflect
this change, call it plat->port_node instead - it is used for more
than just phylink.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZAX8-005pTo-OT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a function which can be used to limit the phylink MAC capabilities
to an upper speed limit.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZAX3-005pTi-K1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an skb fails to be forwarded to the peer(e.g., skb data buffer
length exceeds MTU), it will not be added to the peer's receive queue.
Therefore, we should schedule the peer's NAPI poll function only when
skb forwarding is successful to avoid unnecessary overhead.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Link: https://lore.kernel.org/r/20230824123131.7673-1-liangchen.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
simultaneously
MAC (CGX or RPM) asserts backpressure at TL3 or TL2 node of the egress
hierarchical scheduler tree depending on link level config done. If
there are multiple PFC priorities enabled at a time and for all such
flows to backoff, each priority will have to assert backpressure at
different TL3/TL2 scheduler nodes and these flows will need to submit
egress pkts to these nodes.
Current PFC configuration has an issue where in only one backpressure
scheduler node is being allocated which is resulting in only one PFC
priority to work. This patch fixes this issue.
Fixes: 99c969a83d82 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824081032.436432-4-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Suppose user has enabled pfc with prio 0,1 on a PF netdev(eth0)
dcb pfc set dev eth0 prio-pfc o:on 1:on
later user enabled pfc priorities 2 and 3 on the VF interface(eth1)
dcb pfc set dev eth1 prio-pfc 2:on 3:on
Instead of enabling pfc on all priorities (0..3), the driver only
enables on priorities 2,3. This patch corrects the issue by using
the proper CSR address.
Fixes: b9d0fedc6234 ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824081032.436432-3-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During PFC TX schedulers free, flag TXSCHQ_FREE_ALL was being set
which caused free up all schedulers other than the PFC schedulers.
This patch fixes that to free only the PFC Tx schedulers.
Fixes: 99c969a83d82 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824081032.436432-2-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.6
The second pull request for v6.6, this time with both stack and driver
changes. Unusually we have only one major new feature but lots of
small cleanup all over, I guess this is due to people have been on
vacation the last month.
Major changes:
rtw89
- Introduce Time Averaged SAR (TAS) support
* tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (114 commits)
wifi: rtlwifi: rtl8723: Remove unused function rtl8723_cmd_send_packet()
wifi: rtw88: usb: kill and free rx urbs on probe failure
wifi: rtw89: Fix clang -Wimplicit-fallthrough in rtw89_query_sar()
wifi: rtw89: phy: modify register setting of ENV_MNTR, PHYSTS and DIG
wifi: rtw89: phy: add phy_gen_def::cr_base to support WiFi 7 chips
wifi: rtw89: mac: define register address of rx_filter to generalize code
wifi: rtw89: mac: define internal memory address for WiFi 7 chip
wifi: rtw89: mac: generalize code to indirectly access WiFi internal memory
wifi: rtw89: mac: add mac_gen_def::band1_offset to map MAC band1 register address
wifi: wlcore: sdio: Use module_sdio_driver macro to simplify the code
wifi: rtw89: initialize multi-channel handling
wifi: rtw89: provide functions to configure NoA for beacon update
wifi: rtw89: call rtw89_chan_get() by vif chanctx if aware of vif
wifi: rtw89: sar: let caller decide the center frequency to query
wifi: rtw89: refine rtw89_correct_cck_chan() by rtw89_hw_to_nl80211_band()
wifi: rtw89: add function prototype for coex request duration
Fix nomenclature for USB and PCI wireless devices
wifi: ath: Use is_multicast_ether_addr() to check multicast Ether address
wifi: ath12k: Remove unused declarations
wifi: ath12k: add check max message length while scanning with extraie
...
====================
Link: https://lore.kernel.org/r/20230825132230.A0833C433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Introduce HCI_QUIRK_BROKEN_LE_CODED
- Add support for PA/BIG sync
- Add support for NXP IW624 chipset
- Add support for Qualcomm WCN7850
* tag 'for-net-next-2023-08-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next:
Bluetooth: btusb: Do not call kfree_skb() under spin_lock_irqsave()
Bluetooth: btusb: Fix quirks table naming
Bluetooth: HCI: Introduce HCI_QUIRK_BROKEN_LE_CODED
Bluetooth: btintel: Send new command for PPAG
Bluetooth: ISO: Add support for periodic adv reports processing
Bluetooth: hci_conn: fail SCO/ISO via hci_conn_failed if ACL gone early
Bluetooth: hci_core: Fix missing instances using HCI_MAX_AD_LENGTH
Bluetooth: ISO: Use defer setup to separate PA sync and BIG sync
Bluetooth: qca: add support for WCN7850
Bluetooth: qca: use switch case for soc type behavior
dt-bindings: net: bluetooth: qualcomm: document WCN7850 chipset
Bluetooth: hci_conn: Fix sending BT_HCI_CMD_LE_CREATE_CONN_CANCEL
Bluetooth: hci_sync: Fix UAF in hci_disconnect_all_sync
Bluetooth: btnxpuart: Improve inband Independent Reset handling
Bluetooth: btnxpuart: Add support for IW624 chipset
Bluetooth: btnxpuart: Remove check for CTS low after FW download
====================
Link: https://lore.kernel.org/r/20230824201458.2577-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"One clk driver fix and two clk framework fixes:
- Fix an OOB access when devm_get_clk_from_child() is used and
devm_clk_release() casts the void pointer to the wrong type
- Move clk_rate_exclusive_{get,put}() within the correct ifdefs in
clk.h so that the stubs are used when CONFIG_COMMON_CLK=n
- Register the proper clk provider function depending on the value of
#clock-cells in the TI keystone driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Fix slab-out-of-bounds error in devm_clk_release()
clk: Fix undefined reference to `clk_rate_exclusive_{get,put}'
clk: keystone: syscon-clk: Fix audio refclk
|
|
For a device with no Power Management Capability, pci_power_up() previously
returned 0 (success) if the platform was able to put the device in D0,
which led to pci_set_full_power_state() trying to read PCI_PM_CTRL, even
though it doesn't exist.
Since dev->pm_cap == 0 in this case, pci_set_full_power_state() actually
read the wrong register, interpreted it as PCI_PM_CTRL, and corrupted
dev->current_state. This led to messages like this in some cases:
pci 0000:01:00.0: Refused to change power state from D3hot to D0
To prevent this, make pci_power_up() always return a negative failure code
if the device lacks a Power Management Capability, even if non-PCI platform
power management has been able to put the device in D0. The failure will
prevent pci_set_full_power_state() from trying to access PCI_PM_CTRL.
Fixes: e200904b275c ("PCI/PM: Split pci_power_up()")
Link: https://lore.kernel.org/r/20230824013738.1894965-1-chenfeiyang@loongson.cn
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable@vger.kernel.org # v5.19+
|
|
Merge devfreq changes and power management tools changes for 6.6-rc1:
- Fix memory leak in devfreq_dev_release() (Boris Brezillon).
- Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
Sadhasivam).
- Explicitly include correct DT includes in devfreq (Rob Herring).
- Add turbo-boost support to cpupower (Wyes Karny).
- Add support for amd_pstate mode change to cpupower (Wyes Karny).
- Fix 'cpupower idle_set' command to accept only numeric values of
arguments (Likhitha Korrapati).
* pm-devfreq:
PM / devfreq: Fix leak in devfreq_dev_release()
PM / devfreq: Reword the kernel-doc comment for devfreq_monitor_start() API
PM / devfreq: Explicitly include correct DT includes
* pm-tools:
cpupower: Fix cpuidle_set to accept only numeric values for idle-set operation.
cpupower: Add turbo-boost support in cpupower
cpupower: Add support for amd_pstate mode change
cpupower: Add EPP value change support
cpupower: Add is_valid_path API
cpupower: Recognise amd-pstate active mode driver
cpupower: Bump soname version
|
|
Merge system-wide power management changes and power capping updates
for 6.6-rc1:
- Add device PM helpers to allow a device to remain powered-on during
system-wide transitions (Ulf Hansson).
- Rework hibernation memory snapshotting to avoid storing pages filled
with zeros in hibernation image files (Brian Geffon).
- Add check to make sure that CPU latency QoS constraints do not use
negative values (Clive Lin).
- Optimize rp->domains memory allocation in the Intel RAPL power
capping driver (xiongxin).
- Remove recursion while parsing zones in the arm_scmi power capping
driver (Cristian Marussi).
* pm-sleep:
PM: sleep: Add helpers to allow a device to remain powered-on
PM: hibernate: don't store zero pages in the image file
* pm-qos:
PM: QoS: Add check to make sure CPU latency is non-negative
* powercap:
powercap: intel_rapl: Optimize rp->domains memory allocation
powercap: arm_scmi: Remove recursion while parsing zones
|
|
Merge CPU power management updates for 6.6-rc1:
- Rework the menu and teo cpuidle governors to avoid calling
tick_nohz_get_sleep_length(), which is likely to become quite
expensive going forward, too often and improve making decisions
regarding whether or not to stop the scheduler tick in the teo
governor (Rafael Wysocki).
- Improve the performance of cpufreq_stats_create_table() in some
cases (Liao Chang).
- Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal).
- Use clamp() helper macro to improve the code readability in
cpufreq_verify_within_limits() (Liao Chang).
- Set stale CPU frequency to minimum in intel_pstate (Doug Smythies).
* pm-cpuidle:
cpuidle: teo: Avoid unnecessary variable assignments
cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases
cpuidle: teo: Gather statistics regarding whether or not to stop the tick
cpuidle: teo: Skip tick_nohz_get_sleep_length() call in some cases
cpuidle: teo: Do not call tick_nohz_get_sleep_length() upfront
cpuidle: teo: Drop utilized from struct teo_cpu
cpuidle: teo: Avoid stopping the tick unnecessarily when bailing out
cpuidle: teo: Update idle duration estimate when choosing shallower state
* pm-cpufreq:
cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver
cpufreq: amd-pstate-ut: Remove module parameter access
cpufreq: Use clamp() helper macro to improve the code readability
cpufreq: intel_pstate: set stale CPU frequency to minimum
cpufreq: stats: Improve the performance of cpufreq_stats_create_table()
|
|
Merge a PNP change for 6.6-rc1:
- Fix string truncation warning in pnpacpi_add_device() (Sunil V L).
* pnp:
PNP: ACPI: Fix string truncation warning
|
|
Merge ACPI power management updates for 6.6-rc1:
- Fix and clean up suspend-to-idle interface for AMD systems (Mario
Limonciello, Andy Shevchenko).
* acpi-pm:
ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device
ACPI: x86: s2idle: Add for_each_lpi_constraint() helper
ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
ACPI: x86: s2idle: Post-increment variables when getting constraints
ACPI: Adjust #ifdef for *_lps0_dev use
|
|
Merge ACPI device enumeration changes, ACPI TAD and extlog drivers
updates, and miscellaneous ACPI-related changes for 6.6-rc1:
- Defer enumeration of devices with _DEP pointing to IVSC (Wentong Wu).
- Install SystemCMOS address space handler for ACPI000E (TAD) to meet
platform firmware expectations on some platforms (Zhang Rui).
- Fix finding the generic error data in the ACPi extlog driver for
compatibility with old and new firmware interface versions (Xiaochun
Lee).
- Remove assorted unused declarations of functions (Yue Haibing).
- Move AMBA bus scan handling into arm64 specific directory (Sudeep
Holla).
* acpi-scan:
ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
* acpi-tad:
ACPI: TAD: Install SystemCMOS address space handler for ACPI000E
* acpi-extlog:
ACPI: extlog: Fix finding the generic error data for v3 structure
* acpi-misc:
ACPI: Remove assorted unused declarations of functions
ACPI: Remove unused extern declaration acpi_paddr_to_node()
ACPI: Move AMBA bus scan handling into arm64 specific directory
|
|
Merge ACPI thermal driver changes for 6.6-rc1:
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello).
- Clean up the ACPI thermal driver, rework the handling of firmware
notifications in it and make it provide a table of generic trip point
structures to the core during initialization (Rafael Wysocki).
* acpi-thermal:
ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
ACPI: thermal: Drop unnecessary thermal zone callbacks
ACPI: thermal: Rework thermal_get_trend()
ACPI: thermal: Use trip point table to register thermal zones
thermal: core: Rework and rename __for_each_thermal_trip()
ACPI: thermal: Introduce struct acpi_thermal_trip
ACPI: thermal: Carry out trip point updates under zone lock
ACPI: thermal: Clean up acpi_thermal_register_thermal_zone()
thermal: core: Add priv pointer to struct thermal_trip
thermal: core: Introduce thermal_zone_device_exec()
thermal: core: Do not handle trip points with invalid temperature
ACPI: thermal: Drop redundant local variable from acpi_thermal_resume()
ACPI: thermal: Do not attach private data to ACPI handles
ACPI: thermal: Drop enabled flag from struct acpi_thermal_active
ACPI: thermal: Drop nocrt parameter
|
|
Merge ACPI processor driver changes for 6.6-rc1:
- Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao).
- Convert ACPI CPU initialization to using _OSC instead of _PDC that
has been depreceted since 2018 and dropped from the specification in
ACPI 6.5 (Michal Wilczynski, Rafael Wysocki).
* acpi-processor:
ACPI: processor: LoongArch: Get physical ID from MADT
ACPI: processor: Refine messages in acpi_early_processor_control_setup()
ACPI: processor: Remove acpi_hwp_native_thermal_lvt_osc()
ACPI: processor: Use _OSC to convey OSPM processor support information
ACPI: processor: Introduce acpi_processor_osc()
ACPI: processor: Set CAP_SMP_T_SWCOORD in arch_acpi_set_proc_cap_bits()
ACPI: processor: Clear C_C2C3_FFH and C_C1_FFH in arch_acpi_set_proc_cap_bits()
ACPI: processor: Rename ACPI_PDC symbols
ACPI: processor: Refactor arch_acpi_set_pdc_bits()
ACPI: processor: Move processor_physically_present() to acpi_processor.c
ACPI: processor: Move MWAIT quirk out of acpi_processor.c
|
|
Add support for sa8775p SoC that uses controller version 5.90
reusing the 1.9.0 config.
Link: https://lore.kernel.org/linux-pci/1689960276-29266-3-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
Merge changes related to the ACPI bus type and ACPI backlight driver
changes for 6.6-rc1:
- Introduce new wrappers for ACPICA notify handler install/remove and
convert multiple drivers to using their own Notify() handlers instead
of the ACPI bus type .notify() slated for removal (Michal Wilczynski).
- Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2 (Hans
de Goede).
- Put ACPI video and its child devices explicitly into D0 on boot to
avoid platform firmware confusion (Kai-Heng Feng).
- Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby).
* acpi-bus:
ACPI: thermal: Install Notify() handler directly
ACPI: NFIT: Remove unnecessary .remove callback
ACPI: NFIT: Install Notify() handler directly
ACPI: HED: Install Notify() handler directly
ACPI: battery: Install Notify() handler directly
ACPI: video: Install Notify() handler directly
ACPI: AC: Install Notify() handler directly
ACPI: bus: Set driver_data to NULL every time .add() fails
ACPI: bus: Introduce wrappers for ACPICA notify handler install/remove
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
ACPI: video: Put ACPI video and its child devices into D0 on boot
ACPI: video: Add backlight=native DMI quirk for Lenovo Ideapad Z470
|
|
Merge ACPICA material for 6.6-rc1.
This includes some fixes, cleanups and new material, mostly related to
parsing tables.
Specifics:
- Suppress a GCC 12 dangling-pointer warning (Philip Prindeville).
- Reformat the ACPI_STATE_COMMON macro and its users (George Guo).
- Replace the ternary operator with ACPI_MIN() (Jiangshan Yi).
- Add support for _DSC as per ACPI 6.5 (Saket Dumbre).
- Remove a duplicate macro from zephyr header (Najumon B.A).
- Add data structures for GED and _EVT tracking (Jose Marinho).
- Fix misspelled CDAT DSMAS define (Dave Jiang).
- Simplify an error message in acpi_ds_result_push() (Christophe
Jaillet).
- Add a struct size macro related to SRAT (Dave Jiang).
- Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar).
- Add support for RISC-V external interrupt controllers in MADT (Sunil
V L).
- Add RHCT flags, CMO and MMU nodes (Sunil V L).
- Change ACPICA version to 20230628 (Bob Moore).
* acpica:
ACPICA: Update version to 20230628
ACPICA: RHCT: Add flags, CMO and MMU nodes
ACPICA: MADT: Add RISC-V external interrupt controllers
ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer
ACPICA: Add a define for size of struct acpi_srat_generic_affinity device_handle
ACPICA: Slightly simplify an error message in acpi_ds_result_push()
ACPICA: Fix misspelled CDAT DSMAS define
ACPICA: Add interrupt command to acpiexec
ACPICA: Detect GED device and keep track of _EVT
ACPICA: fix for conflict macro definition on zephyr interface
ACPICA: Add support for _DSC as per ACPI 6.5
ACPICA: exserial.c: replace ternary operator with ACPI_MIN()
ACPICA: Modify ACPI_STATE_COMMON
ACPICA: Fix GCC 12 dangling-pointer warning
|
|
Qcom PCIe EP controllers have 4K alignment restriction for the outbound
window address. Hence, pass this info to the EPF core so that the EPF
drivers can make use of this info.
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an irq mapping leak in gpio-sim
- associate the GPIO device's software node with the irq domain in
gpio-sim
* tag 'gpio-fixes-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: pass the GPIO device's software node to irq domain
gpio: sim: dispose of irq mappings before destroying the irq_sim domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here are some Renesas and AMD driver fixes, the AMD fix affects
important laptops in the wild so this one is pretty important. It
seems a bit tough to get this right.
- Fix DT parsing and related locking in the Renesas driver.
- Fix wakeup IRQs in the AMD driver once again. Really tricky this
one"
* tag 'pinctrl-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: Mask wake bits on probe again
pinctrl: renesas: rza2: Add lock around pinctrl_generic{{add,remove}_group,{add,remove}_function}
pinctrl: renesas: rzv2m: Fix NULL pointer dereference in rzv2m_dt_subnode_to_map()
pinctrl: renesas: rzg2l: Fix NULL pointer dereference in rzg2l_dt_subnode_to_map()
|
