summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-08-22Merge tag 'counter-updates-for-6.6a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next William writes: First set of Counter updates for the 6.6 cycle This set consists primarily of minor clean-ups. The counter_priv() 'const' attribute change does yield a small improvement in reducing the binary size. Changes * rz-mtu3-cnt - Reorder locking sequence for consistency * Documentation - sysfs-bus-counter: Fix indentation * counter - Declare counter_priv() to be const * microchip-tcb-capture - Explicitly include correct DT includes * tag 'counter-updates-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: rz-mtu3-cnt: Reorder locking sequence for consistency Documentation: ABI: sysfs-bus-counter: Fix indentation counter: Declare counter_priv() to be const counter: Explicitly include correct DT includes
2023-08-22Merge tag 'fpga-for-6.6-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next Xu writes: FPGA Manager changes for 6.6-rc1 - Marco's change fixes kernel-doc warnings. - Yangtao's change converts to use devm_platform_ioremap_resource(). - Peter's change uses HWMON defined Macros for HWMON interfaces support. - Rob's change explicitly includes correct DT includes. - Marco's change adds KUnit tests for FPGA core. - Xiongfeng's change converts to use pci_find_vsec_capability(). - Ivan's change makes fpga_xxx_class a static const structure. All patches have been reviewed on the mailing list, and have been in the last linux-next releases (as part of our for-next branch). Signed-off-by: Xu Yilun <yilun.xu@intel.com> * tag 'fpga-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga: fpga: region: make fpga_region_class a static const structure fpga: fpga-mgr: make fpga_mgr_class a static const structure fpga: bridge: make fpga_bridge_class a static const structure fpga: dfl-pci: Use pci_find_vsec_capability() to simplify the code fpga: add configuration for the FPGA KUnit test suites. fpga: add an initial KUnit suite for the FPGA Region fpga: add an initial KUnit suite for the FPGA Bridge fpga: add an initial KUnit suite for the FPGA Manager fpga: Explicitly include correct DT includes fpga: socfpga-a10: Convert to devm_platform_ioremap_resource() fpga: fpga-mgr: altera-pr-ip: Convert to devm_platform_ioremap_resource() fpga: zynq-fpga: Convert to devm_platform_ioremap_resource() fpga: fpga-mgr: ts73xx: Convert to devm_platform_ioremap_resource() fpga: fpga-mgr: socfpga: Convert to devm_platform_ioremap_resource() fpga: xilinx-pr-decoupler: Convert to devm_platform_ioremap_resource() fpga: dfl-fme-mgr: Convert to devm_platform_ioremap_resource() fpga: bridge: Convert to devm_platform_ioremap_resource() fpga: bridge: fix kernel-doc fpga: region: fix kernel-doc fpga: dfl: fme: use SI unit prefix macros
2023-08-22fsi: i2cr: Switch to use struct i2c_driver's .probe()Uwe Kleine-König
struct i2c_driver::probe_new is about to go away. Switch the driver to use the probe callback with the same prototype. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20230816171944.123705-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22amba: bus: fix refcount leakPeng Fan
commit 5de1540b7bc4 ("drivers/amba: create devices from device tree") increases the refcount of of_node, but not releases it in amba_device_release, so there is refcount leak. By using of_node_put to avoid refcount leak. Fixes: 5de1540b7bc4 ("drivers/amba: create devices from device tree") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230821023928.3324283-1-peng.fan@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22staging: rtl8192e: Annotate struct rtllib_txb with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct rtllib_txb. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philipp Hortmann <philipp.g.hortmann@gmail.com> Cc: linux-staging@lists.linux.dev Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/20230817204523.never.034-kees@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22staging: greybus: fix alignment of open parenthesisRohit Chavan
Fixed all CHECK: Alignment should match open parenthesis as reported by checkpatch to adhere to the Linux kernel coding-style guidelines. Signed-off-by: Rohit Chavan <roheetchavan@gmail.com> Link: https://lore.kernel.org/r/20230822080213.6757-1-roheetchavan@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22staging: sm750fb: fix sii164InitChip function nameAbdel Alkuor
Adhere to Linux Kernel coding style. Found by checkpatch. Signed-off-by: Abdel Alkuor <alkuor@gmail.com> Link: https://lore.kernel.org/r/ZNvITXcfVwpJAh6y@abdel Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22staging: vme_user: fix check lines should not end with a '('Alexon Oliveira
Fixed all CHECK: Lines should not end with a '(' as reported by checkpatch to adhere to the Linux kernel coding-style guidelines. Signed-off-by: Alexon Oliveira <alexondunkan@gmail.com> Link: https://lore.kernel.org/r/ZNqbDtRjGWq67lDJ@alolivei-thinkpadt480s.gru.csb Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22staging: vme_user: fix check blank lines not necessaryAlexon Oliveira
Fixed all CHECK: Blank lines aren't necessary after an open brace '{' and CHECK: Blank lines aren't necessary before a close brace '}' as reported by checkpatch to adhere to the Linux kernel coding-style guidelines. Signed-off-by: Alexon Oliveira <alexondunkan@gmail.com> Link: https://lore.kernel.org/r/ZNqYXAe/wIRl8qEe@alolivei-thinkpadt480s.gru.csb Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22staging: rtl8723bs: Use helpers to check broadcast and multicast Ether addressesRuan Jinjie
Use is_multicast_ether_addr() and is_broadcast_ether_addr() instead of custom macro IS_MCAST() and MacAddr_isBcst(), the buffer is properly aligned. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230814105623.292541-1-ruanjinjie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22staging: vt6655: replace camel case by snake casePavan Bobba
Replace array name of camel case by snake case. Issue found by checkpatch Signed-off-by: Pavan Bobba <opensource206@gmail.com> Link: https://lore.kernel.org/r/ZNotXWJbJU1Gi2Gx@ubuntu.myguest.virtualbox.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22staging: rtl8192e: Remove unsupported mode IW_MODE_MESHPhilipp Hortmann
Tasklet irq_rx_tasklet is scheduled when hw is receiving frames. Function _rtl92e_irq_rx_tasklet() is then called which calls then _rtl92e_rx_normal(). In _rtl92e_rx_normal() all frames are processed by rtllib_rx(). When ieee->iw_mode is IW_MODE_MESH the function returns 0. The calling function then calls: dev_kfree_skb_any() which clears the skb. So the driver clears all packets received in this mode. Remove dead code in mode IW_MODE_MESH. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/54230361abba9f33827eac9bf5074dd9f62d787b.1691908402.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22staging: rtl8192e: Remove unsupported mode IW_MODE_REPEATPhilipp Hortmann
Tasklet irq_rx_tasklet is scheduled when hw is receiving frames. Function _rtl92e_irq_rx_tasklet() is then called which calls then _rtl92e_rx_normal(). In _rtl92e_rx_normal() all frames are processed by rtllib_rx(). When ieee->iw_mode is IW_MODE_REPEAT the function returns 0. The calling function then calls: dev_kfree_skb_any() which clears the skb. So the driver clears all packets received in this mode. Remove dead code in mode IW_MODE_REPEAT. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/dc6a0ac89970f5b80a552453a9d057c24f53f43b.1691908402.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22staging: rtl8192e: Remove unused function rtllib_start_master_bss()Philipp Hortmann
Remove unused functions rtllib_start_master_bss(), rtllib_rx_assoc_rq() and rtllib_rx_auth_rq() and resulting unused functions. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/ac2012d94fe4ff705cc900bb1cf2d58bc81c77f0.1691908402.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22staging: rtl8192e: Remove unsupported mode IW_MODE_MASTERPhilipp Hortmann
Tasklet irq_rx_tasklet is scheduled when hw is receiving frames. Function _rtl92e_irq_rx_tasklet() is then called which calls then _rtl92e_rx_normal(). In _rtl92e_rx_normal() all frames are processed by rtllib_rx(). When ieee->iw_mode is IW_MODE_MASTER the function returns 0. The calling function then calls: dev_kfree_skb_any() which clears the skb. So the driver clears all packets received in this mode. Remove dead code in mode IW_MODE_MASTER. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/9cd4574e4cfe0a2d7afce03c9b868757e215a23c.1691908402.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22staging: vt6655: Change camel case variables to snake caseMingzai Sun
Change camel case to snake case and remove the unneeded "by" prefix. Issue found by checkpatch. Signed-off-by: Mingzai Sun <szp2017@gmail.com> Link: https://lore.kernel.org/r/20230812151710.462685-1-szp2017@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22wifi: ath9k: Remove unused declarationsYue Haibing
Commit b57ba3b2f7b0 ("ath9k: move ath9k_reload_chainmask_settings to common") removed the implementation ath9k_reload_chainmask_settings() but not the declaration. Also commit 978f78bf7137 ("ath9k_hw: Move bt_stomp to hw from common.") left behind ath9k_cmn_btcoex_bt_stomp() declaration. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230810145222.34364-1-yuehaibing@huawei.com
2023-08-22wifi: ath9k: Remove unnecessary ternary operatorsRuan Jinjie
Ther are a little ternary operators, the true or false judgement of which is unnecessary in C language semantics. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230731124455.2039184-1-ruanjinjie@huawei.com
2023-08-22wifi: ath9k: consistently use kstrtoX_from_user() functionsDmitry Antipov
Use 'kstrtoul_from_user()' and 'kstrtobool_from_user()' where appropriate and thus avoid some code duplication. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230726185046.188225-1-dmantipov@yandex.ru
2023-08-22wifi: ath9k: fix parameter check in ath9k_init_debug()Minjie Du
Make IS_ERR() judge the debugfs_create_dir() function return in ath9k_init_debug() Signed-off-by: Minjie Du <duminjie@vivo.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230712114740.13226-1-duminjie@vivo.com
2023-08-22wifi: ath9k: protect WMI command response buffer replacement with a lockFedor Pchelkin
If ath9k_wmi_cmd() has exited with a timeout, it is possible that during next ath9k_wmi_cmd() call the wmi_rsp callback for previous wmi command writes to new wmi->cmd_rsp_buf and makes a completion. This results in an invalid ath9k_wmi_cmd() return value. Move the replacement of WMI command response buffer and length under wmi_lock. Note that last_seq_id value is updated there, too. Thus, the buffer cannot be written to by a belated wmi_rsp callback because that path is properly rejected by the last_seq_id check. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230425192607.18015-2-pchelkin@ispras.ru
2023-08-22wifi: ath9k: fix races between ath9k_wmi_cmd and ath9k_wmi_ctrl_rxFedor Pchelkin
Currently, the synchronization between ath9k_wmi_cmd() and ath9k_wmi_ctrl_rx() is exposed to a race condition which, although being rather unlikely, can lead to invalid behaviour of ath9k_wmi_cmd(). Consider the following scenario: CPU0 CPU1 ath9k_wmi_cmd(...) mutex_lock(&wmi->op_mutex) ath9k_wmi_cmd_issue(...) wait_for_completion_timeout(...) --- timeout --- /* the callback is being processed * before last_seq_id became zero */ ath9k_wmi_ctrl_rx(...) spin_lock_irqsave(...) /* wmi->last_seq_id check here * doesn't detect timeout yet */ spin_unlock_irqrestore(...) /* last_seq_id is zeroed to * indicate there was a timeout */ wmi->last_seq_id = 0 mutex_unlock(&wmi->op_mutex) return -ETIMEDOUT ath9k_wmi_cmd(...) mutex_lock(&wmi->op_mutex) /* the buffer is replaced with * another one */ wmi->cmd_rsp_buf = rsp_buf wmi->cmd_rsp_len = rsp_len ath9k_wmi_cmd_issue(...) spin_lock_irqsave(...) spin_unlock_irqrestore(...) wait_for_completion_timeout(...) /* the continuation of the * callback left after the first * ath9k_wmi_cmd call */ ath9k_wmi_rsp_callback(...) /* copying data designated * to already timeouted * WMI command into an * inappropriate wmi_cmd_buf */ memcpy(...) complete(&wmi->cmd_wait) /* awakened by the bogus callback * => invalid return result */ mutex_unlock(&wmi->op_mutex) return 0 To fix this, update last_seq_id on timeout path inside ath9k_wmi_cmd() under the wmi_lock. Move ath9k_wmi_rsp_callback() under wmi_lock inside ath9k_wmi_ctrl_rx() so that the wmi->cmd_wait can be completed only for initially designated wmi_cmd call, otherwise the path would be rejected with last_seq_id check. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230425192607.18015-1-pchelkin@ispras.ru
2023-08-22wifi: ath5k: Remove redundant dev_err()Ruan Jinjie
There is no need to call the dev_err() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230726171235.2475625-1-ruanjinjie@huawei.com
2023-08-22serial: 8250_bcm7271: improve bcm7271 8250 portJustin Chen
The 8250 BCM7271 UART is not a direct match to PORT_16550A and other generic ports do not match its hardware capabilities. PORT_ALTR matches the rx trigger levels, but its vendor configurations are not compatible. Unfortunately this means we need to create another port to fully capture the hardware capabilities of the BCM7271 UART. To alleviate some latency pressures, we default the rx trigger level to 8. Signed-off-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/1692643978-16570-1-git-send-email-justin.chen@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: sc16is7xx: add missing support for rs485 devicetree propertiesHugo Villeneuve
Retrieve rs485 devicetree properties on registration of sc16is7xx ports in case they are attached to an rs485 transceiver. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com> Tested-by: Lech Perczak <lech.perczak@camlingroup.com> Link: https://lore.kernel.org/r/20230807214556.540627-7-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: sc16is7xx: fix bug when first setting GPIO directionHugo Villeneuve
When configuring a pin as an output pin with a value of logic 0, we end up as having a value of logic 1 on the output pin. Setting a logic 0 a second time (or more) after that will correctly output a logic 0 on the output pin. By default, all GPIO pins are configured as inputs. When we enter sc16is7xx_gpio_direction_output() for the first time, we first set the desired value in IOSTATE, and then we configure the pin as an output. The datasheet states that writing to IOSTATE register will trigger a transfer of the value to the I/O pin configured as output, so if the pin is configured as an input, nothing will be transferred. Therefore, set the direction first in IODIR, and then set the desired value in IOSTATE. This is what is done in NXP application note AN10587. Fixes: dfeae619d781 ("serial: sc16is7xx") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com> Tested-by: Lech Perczak <lech.perczak@camlingroup.com> Link: https://lore.kernel.org/r/20230807214556.540627-6-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: sc16is7xx: fix regression with GPIO configurationHugo Villeneuve
Commit 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") and commit 21144bab4f11 ("sc16is7xx: Handle modem status lines") changed the function of the GPIOs pins to act as modem control lines without any possibility of selecting GPIO function. As a consequence, applications that depends on GPIO lines configured by default as GPIO pins no longer work as expected. Also, the change to select modem control lines function was done only for channel A of dual UART variants (752/762). This was not documented in the log message. Allow to specify GPIO or modem control line function in the device tree, and for each of the ports (A or B). Do so by using the new device-tree property named "nxp,modem-control-line-ports" (property added in separate patch). When registering GPIO chip controller, mask-out GPIO pins declared as modem control lines according to this new DT property. Fixes: 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") Fixes: 21144bab4f11 ("sc16is7xx: Handle modem status lines") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com> Tested-by: Lech Perczak <lech.perczak@camlingroup.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230807214556.540627-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: sc16is7xx: remove obsolete out_thread labelHugo Villeneuve
Commit c8f71b49ee4d ("serial: sc16is7xx: setup GPIO controller later in probe") moved GPIO setup code later in probe function. Doing so also required to move ports cleanup code (out_ports label) after the GPIO cleanup code. After these moves, the out_thread label becomes misplaced and makes part of the cleanup code illogical. This patch remove the now obsolete out_thread label and make GPIO setup code jump to out_ports label if it fails. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com> Tested-by: Lech Perczak <lech.perczak@camlingroup.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230807214556.540627-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: sc16is7xx: fix broken port 0 uart initHugo Villeneuve
The sc16is7xx_config_rs485() function is called only for the second port (index 1, channel B), causing initialization problems for the first port. For the sc16is7xx driver, port->membase and port->mapbase are not set, and their default values are 0. And we set port->iobase to the device index. This means that when the first device is registered using the uart_add_one_port() function, the following values will be in the port structure: port->membase = 0 port->mapbase = 0 port->iobase = 0 Therefore, the function uart_configure_port() in serial_core.c will exit early because of the following check: /* * If there isn't a port here, don't do anything further. */ if (!port->iobase && !port->mapbase && !port->membase) return; Typically, I2C and SPI drivers do not set port->membase and port->mapbase. The max310x driver sets port->membase to ~0 (all ones). By implementing the same change in this driver, uart_configure_port() is now correctly executed for all ports. Fixes: dfeae619d781 ("serial: sc16is7xx") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com> Tested-by: Lech Perczak <lech.perczak@camlingroup.com> Link: https://lore.kernel.org/r/20230807214556.540627-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: 8250_dw: fall back to poll if there's no interruptJisheng Zhang
When there's no irq(this can be due to various reasons, for example, no irq from HW support, or we just want to use poll solution, and so on), falling back to poll is still better than no support at all. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Link: https://lore.kernel.org/r/20230806092056.2467-3-jszhang@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: tegra: handle clk prepare error in tegra_uart_hw_init()Yi Yang
In tegra_uart_hw_init(), the return value of clk_prepare_enable() should be checked since it might fail. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Signed-off-by: Yi Yang <yiyang13@huawei.com> Link: https://lore.kernel.org/r/20230817105406.228674-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: sifive: Add suspend and resume operationsNick Hu
If the Sifive Uart is not used as the wake up source, suspend the uart before the system enter the suspend state to prevent it woken up by unexpected uart interrupt. Resume the uart once the system woken up. Signed-off-by: Nick Hu <nick.hu@sifive.com> Reviewed-by: Ben Dooks <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20230815090216.2575971-1-nick.hu@sifive.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22tty: serial: meson: Add a earlycon for the T7 SoCLucas Tanure
The new Amlogic T7 SoC does not have a always-on uart, so add OF_EARLYCON_DECLARE for it. Signed-off-by: Lucas Tanure <tanure@linux.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230814080128.143613-2-tanure@linux.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: stm32: synchronize RX DMA channel in shutdownAmelie Delaunay
In shutdown, RX DMA channel is terminated. If the DMA RX callback is scheduled but not yet executed, while a new RX DMA transfer is started, the callback can be executed, and then disturb the ongoing RX DMA transfer. To avoid such a case, call dmaengine_synchronize in shutdown, after the DMA RX channel is terminated. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230808161906.178996-7-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: stm32: replace access to DMAR bit by dmaengine_pause/resumeValentin Caron
It's rather advised to rely on DMA pause / resume instead of clearing/setting DMA request enable bit for the same purpose. Some DMA request/acknowledge race may encountered by doing so. We prefer to use dmaengine_pause and resume instead to pause a dma transfer when it is necessary. Create two new functions (stm32_usart_rx_dma_pause, stm32_usart_rx_dma _resume) to handle dma error when pausing/resuming. And rename stm32_usart_start_rx_dma_cyclic() to stm32_usart_rx_dma_start_or_resume() and use this function to resume an rx dma transfer. If resume fail, stm32_usart_rx_dma_start_or_resume can create a new transfer to continue. It is also safer to close DMA before reset DMAR in stm32_usart_shutdown. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230808161906.178996-6-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: stm32: group dma pause/resume error handling into single functionValentin Caron
Create new function "stm32_usart_dma_pause_resume" that called dmaengine_ pause/resume and in case of error, terminate dma transaction. Two other functions are created to facilitate the use of stm32_usart_dma _pause_resume : stm32_usart_tx_dma_pause, stm32_usart_tx_dma_resume. Equivalent functions for rx will be added in future patch. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230808161906.178996-5-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: stm32: modify parameter and rename stm32_usart_rx_dma_enabledValentin Caron
Rename stm32_usart_rx_dma_enabled to stm32_usart_rx_dma_started in order to match with stm32_usart_tx_dma_started. Modify argument of stm32_usart_rx_dma_started from uart_port structure to stm32_port structure to match with stm32_usart_tx_dma_started. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230808161906.178996-4-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: stm32: use DMAT as a configuration bitValentin Caron
DMAT is a configuration bit so it should be set at the startup of uart port and not when a DMA transfer begins. This patch move set of DMAT into set_termios and remove DMAT reset except in shutdown. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230808161906.178996-3-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: stm32: avoid clearing DMAT bit during transferValentin Caron
It's rather advised to rely on DMA pause / resume instead of clearing/setting DMA request enable bit for the same purpose. Some DMA request/acknowledge race may encountered by doing so. We prefer to use dmaengine_pause and resume instead to pause a dma transfer when it is necessary. It is also safer to close DMA before reset DMAT in stm32_usart_shutdown. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230808161906.178996-2-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22tty: n_gsm: add restart flag to extended ioctl configDaniel Starke
Currently, changing the parameters of the n_gsm mux gives no direct control to the user whether this should trigger a mux reset or not. The decision is solely made by the driver based on the assumption which parameter changes are compatible or not. Therefore, the user has no means to perform an automatic mux reset after parameter configuration for non-conflicting changes. Add the parameter 'flags' to 'gsm_config_ext' to force a mux reset after ioctl setting regardless of whether the changes made require this or not by setting this to 'GSM_FL_RESTART'. This is done similar to 'GSM_FL_RESTART' in gsm_dlci_config.flags. Note that 'GSM_FL_RESTART' is currently the only allowed flag to allow additions here. Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230817093231.2317-9-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22tty: n_gsm: cleanup gsm_control_command and gsm_control_replyDaniel Starke
There are multiple places in gsm_control_command and gsm_control_reply that derive the specific DLCI handle directly out of the DLCI table in gsm. Add a local variable which holds this handle and use it instead to improve code readability. Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230817093231.2317-7-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22tty: n_gsm: increase gsm_mux unsupported counted where appropriateDaniel Starke
The structure gsm_mux contains the 'unsupported' field. However, there is currently no place in the code which increases this counter. Increase the 'unsupported' statistics counter in the following case: - an unsupported frame type has been requested by the peer via parameter negotiation - a control frame with an unsupported but known command has been received Note that we have no means to detect an inconsistent/unsupported adaptation sufficient accuracy as this changes the structure of the UI/UIH frames. E.g. a one byte header is added in case of convergence layer type 2 instead of 1 and contains the modem signal octet with the state of the signal lines. There is no checksum or other value which indicates of this field is correct or should be present. Therefore, we can only assume protocol correctness here. See also 'gsm_dlci_data()' where this is handled. Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230817093231.2317-6-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22tty: n_gsm: increase malformed counter for malformed control framesDaniel Starke
The malformed counter in gsm_mux is already increased in case of errors detected in gsm_queue() and gsm1_receive(). gsm_dlci_command() also detects a case for a malformed frame but does not increase the malformed counter yet. Fix this by also increasing the gsm_mux malformed counter in case of a malformed frame in gsm_dlci_command(). Note that the malformed counter is not yet exposed and only set internally. Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230817093231.2317-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22tty: n_gsm: add open_error counter to gsm_muxDaniel Starke
Extend the n_gsm link statistics by a failed link open counter in preparation for an upcoming patch which will expose these. This counter is increased whenever an attempt to open the control channel failed. This is true in the following cases: - new DLCI allocation failed - connection request (SAMB) with invalid CR flag has been received - connection response (UA) timed out - parameter negotiation timed out or failed Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230817093231.2317-4-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22tty: n_gsm: remove unneeded initialization of ret in gsm_dlci_configDaniel Starke
The variable 'ret' is not used before assignment from gsm_activate_mux(). Still it gets initialized to zero at declaration. Fix this as remarked in the link below by moving the declaration to the first assignment. Link: https://lore.kernel.org/all/b42bc4d1-cc9d-d115-c981-aaa053bdc59f@kernel.org/ Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230817093231.2317-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22tty: n_gsm: add restart flag to DLC specific ioctl configDaniel Starke
Currently, changing the parameters of a DLCI gives no direct control to the user whether this should trigger a channel reset or not. The decision is solely made by the driver based on the assumption which parameter changes are compatible or not. Therefore, the user has no means to perform an automatic channel reset after parameter configuration for non-conflicting changes. Add the parameter 'flags' to 'gsm_dlci_config' to force a channel reset after ioctl setting regardless of whether the changes made require this or not by setting this to 'GSM_FL_RESTART'. Note that 'GSM_FL_RESTART' is currently the only allow flag to allow additions here. Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230817093231.2317-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22bonding: update port speed when getting bond speedHangbin Liu
Andrew reported a bonding issue that if we put an active-back bond on top of a 802.3ad bond interface. When the 802.3ad bond's speed/duplex changed dynamically. The upper bonding interface's speed/duplex can't be changed at the same time, which will show incorrect speed. Fix it by updating the port speed when calling ethtool. Reported-by: Andrew Schorr <ajschorr@alumni.princeton.edu> Closes: https://lore.kernel.org/netdev/ZEt3hvyREPVdbesO@Laptop-X1/ Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20230821101008.797482-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-22PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernationDexuan Cui
When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the device yet), doing a VM hibernation triggers a panic in hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because pdev->dev.msi.data is still NULL. Avoid the panic by checking if MSI-X/MSI is enabled. Link: https://lore.kernel.org/r/20230816175939.21566-1-decui@microsoft.com Fixes: dc2b453290c4 ("PCI: hv: Rework MSI handling") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: sathyanarayanan.kuppuswamy@linux.intel.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org
2023-08-22tty: tty_buffer: invert conditions in __tty_buffer_request_room()Jiri Slaby (SUSE)
We are used to handle "bad" states in the 'if's in the kernel. Refactor (invert the two conditions in) __tty_buffer_request_room(), so that the code returns from the fast paths immediately instead of postponing to the heavy end of the function. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230816105530.3335-11-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22tty: tty_buffer: initialize variables in initializers alreadyJiri Slaby (SUSE)
It makes the code both more compact, and more understandable. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230816105530.3335-10-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-13 05:49:31 +0000