| Age | Commit message (Collapse) | Author |
|---|
|
Add thermal info support for newer AMD Family 1Ah-based models.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Link: https://lore.kernel.org/r/20250729001644.257645-1-avadhut.naik@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- i801: drop superfluous WDT entry for Birch
- rtl9300:
- fix channel number check in probe
- check data length boundaries in xfer
- drop broken SMBus quick operation
* tag 'i2c-for-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rtl9300: remove broken SMBus Quick operation support
i2c: rtl9300: ensure data length is within supported range
i2c: rtl9300: fix channel number bound check
i2c: i801: Hide Intel Birch Stream SoC TCO WDT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Remove a misplaced dma_free_coherent() call in altera_edac
* tag 'edac_urgent_for_v6.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/altera: Delete an inappropriate dma_free_coherent() call
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- LTO fix for clang when building with CONFIG_CMODEL_MEDLOW
- Fix for ACPI CPPC CSR read/write return values
- Several fixes for incorrect access widths in thread_info.cpu reads
- Fix an issue in __put_user_nocheck() that was causing the glibc
tst-socket-timestamp test to fail
- Initialize struct kexec_buf records in several kexec-related
functions, which were generating UBSAN warnings
- Two fixes for sparse warnings
* tag 'riscv-for-linus-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix sparse warning about different address spaces
riscv: Fix sparse warning in __get_user_error()
riscv: kexec: Initialize kexec_buf struct
riscv: use lw when reading int cpu in asm_per_cpu
riscv, bpf: use lw when reading int cpu in bpf_get_smp_processor_id
riscv, bpf: use lw when reading int cpu in BPF_MOV64_PERCPU_REG
riscv: uaccess: fix __put_user_nocheck for unaligned accesses
riscv: use lw when reading int cpu in new_vmalloc_check
ACPI: RISC-V: Fix FFH_CPPC_CSR error handling
riscv: Only allow LTO with CMODEL_MEDANY
|
|
Add support for SPD, AUDIO, DRM and HDMI InfoFrames.
Also add support for ISRC1 and ISRC2 Packet Types and a programmable
type for both Packet and InfoFrames.
The tc358743 HDMI-to-CSI2 bridge is widely available, and it has quite
flexible InfoFrame/Packet Type support, so this makes it a very nice
device to capture such data.
The ACP (Audio Content Protection) Packet capture data is chosen as the
programmable type. ACP is typically only used for protected audio, which
is quite rare, so instead it is reprogrammed to capture DRM InfoFrames
by default. This can be changed by using the packet_type module option to
anything you want, and you can change it on the fly as well. It will be
updated whenever VIDIOC_LOG_STATUS is called (it's really a debug feature).
Tested on my Raspberry Pi 5.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add support for DRM (Dynamic Range and Mastering) InfoFrames.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix the checkpatch warning:
CHECK: Alignment should match open parenthesis
Fixes: 0cb172a4918e ("power: supply: cw2015: Use device managed API to simplify the code")
Signed-off-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just
return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Curve25519 is used only via the library API, not the crypto_kpp API. In
preparation for removing the unused crypto_kpp API for Curve25519,
remove the unused "hpre-curve25519" kpp algorithm.
Cc: Longfang Liu <liulongfang@huawei.com>
Cc: Zhiqi Song <songzhiqi1@huawei.com>
Link: https://lore.kernel.org/r/20250906213523.84915-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Use max() to reduce the code in cw_battery_get_property() and improve
its readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Since there's the existing ADC function, add properties 'VOLTAGE_NOW'
and 'CURRENT_NOW' to report the current VBUS and IBUS value, respectively.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The ASUS S15 xElite model report the Li-ion battery with an OOI, hence this
update the detection and return the appropriate type.
Signed-off-by: Christopher Ruehl <chris.ruehl@gtsys.com.hk>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Don't populate the read-only array fsm_state on the stack at run time,
instead make it static const, this reduces the object code size as
the data is placed on the data segment and this removes the need to
have code to set the array up on each call.
Note that making the size of the strings to a more optimal 11 bytes long
does not seem to reduce the overall size. Making the array an array of
pointers to the strings increases the code size due to the dereferencing
overhead.
Simplify the array access with &fsm_state[info->state][0] with the simpler
expression fsm_state[info->state] to clean up the code.
Original:
text data bss dec hex filename
22884 8272 64 31220 79f4 drivers/power/supply/88pm860x_charger.o
Patched:
text data bss dec hex filename
22695 8368 64 31127 7997 drivers/power/supply/88pm860x_charger.o
Difference:
text data bss dec
-189 +96 0 -93
Reduction of 93 bytes total.
gcc version 14.2.0 (x86-64)
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
When `devm_add_action_or_reset()` fails, it is due to a failed memory
allocation and will thus return `-ENOMEM`. `dev_err_probe()` doesn't do
anything when error is `-ENOMEM`. Therefore, remove the useless call to
`dev_err_probe()` when `devm_add_action_or_reset()` fails, and just
return the value instead.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
strcpy() is deprecated for NUL-terminated strings. Replace it with
strscpy() for revstr (local fixed-size buffer).
Signed-off-by: Miguel García <miguelgarciaroman8@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Fixed some minor style issues reported by checkpatch.pl. Mainly adjusted the
spacing around operators and type casts to match the kernel coding
conventions. For example:
- Changed `gpios[ndescs-i-1]` to `gpios[ndescs - i - 1]`
- Added space in `(u32*)` to make it `(u32 *)`
- Cleaned up spacing in a `for` loop
No functional changes — just making the code easier to read and consistent
with the rest of the kernel.
Signed-off-by: Darshan R. <rathod.darshan.0896@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
auxiliary_match_id() repeatedly calculates variable @match_size in the
for loop, however, the variable is fixed actually, so it is enough to
only calculate the variable once.
Besides, the function should return directly if name of the @auxdev
does not include '.', but it still iterates over the ID table.
Additionally, statement 'dev_name(&auxdev->dev)' is fixed, but may be
evaluated more than 3 times.
Optimize logic of the function by:
- Move the logic calculating the variable out of the for loop
- Return NULL directly if @p == NULL
- Give the statement an dedicated local variable @auxdev_name
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250903-fix_auxbus-v2-1-3eae8374fd65@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Starting with commit f99508074e78 ("PM: domains: Detach on
device_unbind_cleanup()"), there is no longer a need to call
dev_pm_domain_detach() in the bus remove function. The
device_unbind_cleanup() function now handles this to avoid
invoking devres cleanup handlers while the PM domain is
powered off, which could otherwise lead to failures as
described in the above-mentioned commit.
Drop the explicit dev_pm_domain_detach() call and rely instead
on the flags passed to dev_pm_domain_attach() to power off the
domain.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250827100541.926350-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the order of the kernel-doc parameters in device_find_child() and
device_for_each_child*() functions to match the actual functions signature.
No functional changes.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Link: https://lore.kernel.org/r/20250831194930.2063390-1-gil.fine@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 9a4681a485ee ("driver core: Export get_dev_from_fwnode()") made
get_dev_from_fwnode() publicly available, but didn't document the
guarantees a caller must uphold:
get_dev_from_fwnode() obtains a reference count from the device pointer
stored in a struct fwnode_handle. While having its own reference count,
struct fwnode_handle does not keep a reference count of the device it
has a pointer to.
Consequently, a caller must guarantee that it is impossible that the
last device reference is dropped and the device is released concurrently
while calling get_dev_from_fwnode(), otherwise this is a potential UAF
and hence a bug.
Thus, document this potential race condition for get_dev_from_fwnode().
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250829205911.33142-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Trivial fix to spelling mistake in comment text.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://lore.kernel.org/r/20250827114021.476668-1-zhao.xichao@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Support for MT6359 PMIC keys has been added recently. However, the key
release event is not properly handled: only key press events are
generated, leaving key states stuck in "pressed".
This patch ensures that both key press and key release events are
properly emitted by handling the release logic correctly.
Introduce a 'key_release_irq' member to the 'mtk_pmic_regs' to identify
the devices that have a separate irq for the release event.
Fixes: bc25e6bf032e ("Input: mtk-pmic-keys - add support for MT6359 PMIC keys")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://lore.kernel.org/r/20250905-radxa-nio-12-l-gpio-v3-1-40f11377fb55@collabora.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The drv->sram_reg pointer could be set to ERR_PTR(-EPROBE_DEFER) which
would lead to a error pointer dereference. Use IS_ERR_OR_NULL() to check
that the pointer is valid.
Fixes: e09bd5757b52 ("PM / devfreq: mtk-cci: Handle sram regulator probe deferral")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://patchwork.kernel.org/project/linux-pm/patch/aJTNHz8kk8s6Q2os@stanley.mountain/
|
|
Add speedbin mappings for A663 GPU.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/670096/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
If two fault IRQs arrive in short succession recovery work will be
queued up twice.
When recovery runs a second time it may end up killing an unrelated
context.
Prevent this by masking off interrupts when triggering recovery.
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/670023/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
The Adreno GPU Management Unit (GMU) can also scale DDR Bandwidth along
the Frequency and Power Domain level, but by default we leave the
OPP core scale the interconnect ddr path.
Declare the Bus Control Modules (BCMs) and the corresponding parameters
in the GPU info struct to allow the GMU to vote for the bandwidth.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/665778/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
This is always set in msm_gpu_init(), and can never be NULL.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/664431/
|
|
Somehow we never noticed this when arm64 became a thing, many years ago.
v2: also fix npages
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/669785/
|
|
We need to reject the MAP op if offset+range is larger than the BO size.
Reported-by: Connor Abbott <cwabbott0@gmail.com>
Fixes: 2e6a8a1fe2b2 ("drm/msm: Add VM_BIND ioctl")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/669781/
|
|
If we fail a handle-lookup part way thru, we need to drop the already
obtained obj references.
Fixes: 2e6a8a1fe2b2 ("drm/msm: Add VM_BIND ioctl")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/669784/
|
|
Add separate macros for walking links to suppliers and consumers of a
device to help device links users to avoid exposing the internals of
struct dev_links_info in their code and possible coding mistakes related
to that.
Accordingly, use the new macros to replace open-coded device links list
walks in the core power management code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/1944671.tdWV9SEqCh@rafael.j.wysocki
|
|
Since SRCU is used for the protection of device link lists, the loops
over device link lists in multiple places in drivers/base/power/main.c
and in pm_runtime_get_suppliers() should be annotated as _srcu rather
than as _rcu which is the case currently.
Change the annotations accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2393512.ElGaqSPkdT@rafael.j.wysocki
|
|
Current implementation uses `CDNS_UART_REGISTER_SPACE(0x1000)`
for request_mem_region() and ioremap() in cdns_uart_request_port() API.
The cadence/xilinx IP has register space defined from offset 0x0 to 0x48.
It also mentions that the register map is defined as [6:0]. So, the upper
region may/maynot be used based on the IP integration.
In Axiado AX3000 SoC two UART instances are defined
0x100 apart. That is creating issue in some other instance due to overlap
with addresses.
Since, this address space is already being defined in the
devicetree, use the same when requesting the register space.
Fixes: 1f7055779001 ("arm64: dts: axiado: Add initial support for AX3000 SoC and eval board")
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Link: https://lore.kernel.org/r/20250902-xilinx-uartps-reg-size-v3-1-d11cfa7258e3@axiado.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The EP-IN of MIDI2 (altset 1) wasn't initialized in
f_midi2_create_usb_configs() as it's an INT EP unlike others BULK
EPs. But this leaves rather the max packet size unchanged no matter
which speed is used, resulting in the very slow access.
And the wMaxPacketSize values set there look legit for INT EPs, so
let's initialize the MIDI2 EP-IN there for achieving the equivalent
speed as well.
Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250905133240.20966-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The gadget card driver forgot to call snd_ump_update_group_attrs()
after adding FBs, and this leaves the UMP group attributes
uninitialized. As a result, -ENODEV error is returned at opening a
legacy rawmidi device as an inactive group.
This patch adds the missing call to address the behavior above.
Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250904153932.13589-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tcpm_handle_vdm_request delivers messages to the partner altmode or the
cable altmode depending on the SVDM response type, which is incorrect.
The partner or cable should be chosen based on the received message type
instead.
Also add this filter to ADEV_NOTIFY_USB_AND_QUEUE_VDM, which is used when
the Enter Mode command is responded to by a NAK on SOP or SOP' and when
the Exit Mode command is responded to by an ACK on SOP.
Fixes: 7e7877c55eb1 ("usb: typec: tcpm: add alt mode enter/exit/vdm support for sop'")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250821203759.1720841-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Yunseong Kim and the syzbot fuzzer both reported a problem in
RT-enabled kernels caused by the way dummy-hcd mixes interrupt
management and spin-locking. The pattern was:
local_irq_save(flags);
spin_lock(&dum->lock);
...
spin_unlock(&dum->lock);
... // calls usb_gadget_giveback_request()
local_irq_restore(flags);
The code was written this way because usb_gadget_giveback_request()
needs to be called with interrupts disabled and the private lock not
held.
While this pattern works fine in non-RT kernels, it's not good when RT
is enabled. RT kernels handle spinlocks much like mutexes; in particular,
spin_lock() may sleep. But sleeping is not allowed while local
interrupts are disabled.
To fix the problem, rewrite the code to conform to the pattern used
elsewhere in dummy-hcd and other UDC drivers:
spin_lock_irqsave(&dum->lock, flags);
...
spin_unlock(&dum->lock);
usb_gadget_giveback_request(...);
spin_lock(&dum->lock);
...
spin_unlock_irqrestore(&dum->lock, flags);
This approach satisfies the RT requirements.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Fixes: b4dbda1a22d2 ("USB: dummy-hcd: disable interrupts during req->complete")
Reported-by: Yunseong Kim <ysk@kzalloc.com>
Closes: <https://lore.kernel.org/linux-usb/5b337389-73b9-4ee4-a83e-7e82bf5af87a@kzalloc.com/>
Reported-by: syzbot+8baacc4139f12fa77909@syzkaller.appspotmail.com
Closes: <https://lore.kernel.org/linux-usb/68ac2411.050a0220.37038e.0087.GAE@google.com/>
Tested-by: syzbot+8baacc4139f12fa77909@syzkaller.appspotmail.com
CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
CC: stable@vger.kernel.org
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/bb192ae2-4eee-48ee-981f-3efdbbd0d8f0@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Suspend-resume cycle test revealed a memory leak in 6.17-rc3
Turns out the slot_id race fix changes accidentally ends up calling
xhci_free_virt_device() with an incorrect vdev parameter.
The vdev variable was reused for temporary purposes right before calling
xhci_free_virt_device().
Fix this by passing the correct vdev parameter.
The slot_id race fix that caused this regression was targeted for stable,
so this needs to be applied there as well.
Fixes: 2eb03376151b ("usb: xhci: Fix slot_id resource race conflict")
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/linux-usb/20250829181354.4450-1-00107082@163.com
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Suggested-by: David Wang <00107082@163.com>
Cc: stable@vger.kernel.org
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pending requests will be flushed on disconnect, and the corresponding
TRBs will be turned into No-op TRBs, which are ignored by the xHC
controller once it starts processing the ring.
If the USB debug cable repeatedly disconnects before ring is started
then the ring will eventually be filled with No-op TRBs.
No new transfers can be queued when the ring is full, and driver will
print the following error message:
"xhci_hcd 0000:00:14.0: failed to queue trbs"
This is a normal case for 'in' transfers where TRBs are always enqueued
in advance, ready to take on incoming data. If no data arrives, and
device is disconnected, then ring dequeue will remain at beginning of
the ring while enqueue points to first free TRB after last cancelled
No-op TRB.
s
Solve this by reinitializing the rings when the debug cable disconnects
and DbC is leaving the configured state.
Clear the whole ring buffer and set enqueue and dequeue to the beginning
of ring, and set cycle bit to its initial state.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Decouple allocation of endpoint ring buffer from initialization
of the buffer, and initialization of endpoint context parts from
from the rest of the contexts.
It allows driver to clear up and reinitialize endpoint rings
after disconnect without reallocating everything.
This is a prerequisite for the next patch that prevents the transfer
ring from filling up with cancelled (no-op) TRBs if a debug cable is
reconnected several times without transferring anything.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since faux devices are not supposed to be involved in any kind of
power management, set the no_pm flag for all of them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/6206518.lOV4Wx5bFT@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove hard-coded strings by using the str_write_read() helper function
and silence the following Coccinelle/coccicheck warning reported by
string_choices.cocci:
opportunity for str_write_read(write)
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250819165829.714344-2-thorsten.blum@linux.dev
|
|
Now that we have pci::Device::unbind() we can unregister the sysmem
flush page with a direct access the I/O resource, i.e. without RCU read
side critical section.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250901150207.63094-1-dakr@kernel.org
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Remove legacy-of-mm-gpiochip.h header file. The above mentioned
file provides an OF API that's deprecated. There is no agnostic
alternatives to it and we have to open code the logic which was
hidden behind of_mm_gpiochip_add_data(). Note, most of the GPIO
drivers are using their own labeling schemas and resource retrieval
that only a few may gain of the code deduplication, so whenever
alternative is appear we can move drivers again to use that one.
[text copied from commit 34064c8267a6 ("powerpc/8xx:
Drop legacy-of-mm-gpiochip.h header")]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/9652736ef05b94d9113ea5ce7899734ef82343d1.1755520794.git.christophe.leroy@csgroup.eu
|
|
Redundant data is used to enhance data fault tolerance, and the storage
method for redundant data vary depending on the RAID levels. And it's
important to maintain the consistency of redundant data.
Bitmap is used to record which data blocks have been synchronized and which
ones need to be resynchronized or recovered. Each bit in the bitmap
represents a segment of data in the array. When a bit is set, it indicates
that the multiple redundant copies of that data segment may not be
consistent. Data synchronization can be performed based on the bitmap after
power failure or readding a disk. If there is no bitmap, a full disk
synchronization is required.
Due to known performance issues with md-bitmap and the unreasonable
implementations:
- self-managed IO submitting like filemap_write_page();
- global spin_lock
I have decided not to continue optimizing based on the current bitmap
implementation, this new bitmap is invented without locking from IO fast
path and can be used with fast disks.
For designs and details, see the comments in drivers/md-llbitmap.c.
Link: https://lore.kernel.org/linux-raid/20250829080426.1441678-12-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Li Nan <linan122@huawei.com>
|
|
daemon_work() will be called by daemon thread, on the one hand, daemon
thread doesn't have strict wake-up time; on the other hand, too much
work are put to daemon thread, like handle sync IO, handle failed
or specail normal IO, handle recovery, and so on. Hence daemon thread
may be too busy to clear dirty bits in time.
Make bitmap_ops->daemon_work() optional and following patches will use
separate async work to clear dirty bits for the new bitmap.
Link: https://lore.kernel.org/linux-raid/20250829080426.1441678-11-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
|
|
This flag is used by llbitmap in later patches to skip raid456 initial
recover and delay building initial xor data to first write.
https://lore.kernel.org/linux-raid/20250829080426.1441678-10-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
Currently, raid456 must perform a whole array initial recovery to build
initail xor data, then IO to the array won't have to read all the blocks
in underlying disks.
This behavior will affect IO performance a lot, and nowadays there are
huge disks and the initial recovery can take a long time. Hence llbitmap
will support lazy initial recovery in following patches. This method is
used to check if data blocks is synced or not, if not then IO will still
have to read all blocks for raid456.
Link: https://lore.kernel.org/linux-raid/20250829080426.1441678-9-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
This method is used to check if blocks can be skipped before calling
into pers->sync_request(), llbitmap will use this method to skip
resync for unwritten/clean data blocks, and recovery/check/repair for
unwritten data blocks;
Link: https://lore.kernel.org/linux-raid/20250829080426.1441678-8-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
|
|
Currently bitmap_ops is registered while allocating mddev, this is fine
when there is only one bitmap_ops.
Delay setting bitmap_ops until creating bitmap, so that user can choose
which bitmap to use before running the array.
Link: https://lore.kernel.org/linux-raid/20250721171557.34587-7-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
