| Age | Commit message (Collapse) | Author |
|---|
|
Add support for CSID 690 found on lemans(sa8775p) soc, This
is different from csid 780 w.r.t few register offsets and
bit-fields.
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for CSIPHY (v1.3.0) found on lemans(sa8775p). This
implementation is based on the titan 690 implementation.
Co-developed-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add CAMSS_8775P enum, compatible and lemans(sa8775p) camss driver
private data, the private data just include some basic information
now, later changes will enumerate with csiphy, tpg, csid and vfe
resources.
Co-developed-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Rename the file camss-vfe-780.c to camss-vfe-gen3.c to enable
reuse of VFE logic across multiple SoCs.
The lemans(sa8775p) SoC includes VFE 690, which is very similar
to VFE 780, with only minor differences in register bitfields.
Rename prepares the codebase for supporting additional SoCs
without duplicating VFE logic.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Rename the file camss-csid-780.c to camss-csid-gen3.c to enable
reuse of CSID logic across multiple SoCs.
The lemans(sa8775p) SoC includes CSID 690, which is functionally very
similar to CSID 780, with only minor differences in register
bitfields. This rename prepares the codebase for supporting
additional SoCs without duplicating CSID logic.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The camera subsystem for QCM2290 which is based on Spectra 340.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
This is the CSI PHY version found in QCS2290/QCM2290 SoCs.
The table is extracted from downstream camera driver.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for CSID found in QCM2290, it's a simplified gen-2 version.
- There is no Test Pattern Generator (moved outside CSID)
- There is no subsampling (moved to CAMIF module)
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for TFE (Thin Front End) found in QCM2290.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: made tfe_line_iface_map and tfe_subgroup_line map static]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
When we succeed loading the firmware, we don't want to hold on to the
firmware pointer anymore, since it won't be freed anywhere else. The same
applies for the mapped memory. Unmapping the memory is particularly
important since the memory will be protected after the Iris firmware is
started, so we need to make sure there will be no accidental access to this
region (even if just a speculative one from the CPU).
Almost the same firmware loading code also exists in venus/firmware.c,
there it is implemented correctly.
Fix this by dropping the early "return ret" and move the call of
qcom_scm_pas_auth_and_reset() out of iris_load_fw_to_memory(). We should
unmap the memory before bringing the firmware out of reset.
Cc: stable@vger.kernel.org
Fixes: d19b163356b8 ("media: iris: implement video firmware load/unload")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for SM8750 Iris codec with major differences against
previous generation SM8650:
1. New clocks and new resets, thus new power up and power down
sequences,
2. New WRAPPER_IRIS_VCODEC_VPU_WRAPPER_SPARE_0 register programmed
during boot-up
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Current devices use same power up sequence, but starting with Qualcomm
SM8750 (VPU v3.5) the sequence will grow quite a bit, so allow
customizing it. No functional change so far for existing devices.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Driver implements different callbacks for the power off controller
(.power_off_controller):
- iris_vpu_power_off_controller,
- iris_vpu33_power_off_controller,
The generic wrapper for handling power off - iris_vpu_power_off() -
calls them via 'iris_platform_data->vpu_ops', so shall the cleanup code
in iris_vpu_power_on().
This makes also sense if looking at caller of iris_vpu_power_on(), which
unwinds also with the wrapper calling respective platfortm code (unwinds
with iris_vpu_power_off()).
Otherwise power off sequence on the newer VPU3.3 in error path is not
complete.
Fixes: c69df5de4ac3 ("media: platform: qcom/iris: add power_off_controller to vpu_ops")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add the missing write to AON_WRAPPER_MVP_NOC_LPI_CONTROL before
reading the LPI status register. Introduce a handshake loop to ensure
MNoC enters low power mode reliably during VPU3 hardware power-off with
timeout handling.
Fixes: 02083a1e00ae ("media: platform: qcom/iris: add support for vpu33")
Cc: stable@vger.kernel.org
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix remove if firmware failed to load:
qcom-iris aa00000.video-codec: Direct firmware load for qcom/vpu/vpu33_p4.mbn failed with error -2
qcom-iris aa00000.video-codec: firmware download failed
qcom-iris aa00000.video-codec: core init failed
then:
$ echo aa00000.video-codec > /sys/bus/platform/drivers/qcom-iris/unbind
Triggers:
genpd genpd:1:aa00000.video-codec: Runtime PM usage count underflow!
------------[ cut here ]------------
video_cc_mvs0_clk already disabled
WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#1: sh/542
<snip>
pc : clk_core_disable+0xa4/0xac
lr : clk_core_disable+0xa4/0xac
<snip>
Call trace:
clk_core_disable+0xa4/0xac (P)
clk_disable+0x30/0x4c
iris_disable_unprepare_clock+0x20/0x48 [qcom_iris]
iris_vpu_power_off_hw+0x48/0x58 [qcom_iris]
iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris]
iris_vpu_power_off+0x34/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
video_cc_mvs0_clk already unprepared
WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#2: sh/542
<snip>
pc : clk_core_unprepare+0xf0/0x110
lr : clk_core_unprepare+0xf0/0x110
<snip>
Call trace:
clk_core_unprepare+0xf0/0x110 (P)
clk_unprepare+0x2c/0x44
iris_disable_unprepare_clock+0x28/0x48 [qcom_iris]
iris_vpu_power_off_hw+0x48/0x58 [qcom_iris]
iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris]
iris_vpu_power_off+0x34/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
---[ end trace 0000000000000000 ]---
genpd genpd:0:aa00000.video-codec: Runtime PM usage count underflow!
------------[ cut here ]------------
gcc_video_axi0_clk already disabled
WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#4: sh/542
<snip>
pc : clk_core_disable+0xa4/0xac
lr : clk_core_disable+0xa4/0xac
<snip>
Call trace:
clk_core_disable+0xa4/0xac (P)
clk_disable+0x30/0x4c
iris_disable_unprepare_clock+0x20/0x48 [qcom_iris]
iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris]
iris_vpu_power_off+0x48/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
------------[ cut here ]------------
gcc_video_axi0_clk already unprepared
WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#4: sh/542
<snip>
pc : clk_core_unprepare+0xf0/0x110
lr : clk_core_unprepare+0xf0/0x110
<snip>
Call trace:
clk_core_unprepare+0xf0/0x110 (P)
clk_unprepare+0x2c/0x44
iris_disable_unprepare_clock+0x28/0x48 [qcom_iris]
iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris]
iris_vpu_power_off+0x48/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
---[ end trace 0000000000000000 ]---
Skip deinit if initialization never succeeded.
Fixes: d7378f84e94e ("media: iris: introduce iris core state management with shared queues")
Fixes: d19b163356b8 ("media: iris: implement video firmware load/unload")
Fixes: bb8a95aa038e ("media: iris: implement power management")
Cc: stable@vger.kernel.org
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage copying deprecated behaviour for OF platforms in new drivers,
and lead to differences in behaviour between drivers. Instead, drivers
that need to preserve the deprecated OF behaviour should use the
devm_v4l2_sensor_clk_get_legacy() helper.
This driver supports OF platforms only. The "clocks" property has always
been specified as mandatory in the DT bindings and the "clock-frequency"
property has initially been optional. Both properties were initially set
in the upstream DT sources. The driver retrieves the clock, retrieves
the clock rate from the "clock-frequency" property if available or uses
a fixed default otherwise, and sets the clock rate. This is deprecated
behaviour for OF.
Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This
preserves setting the clock rate on OF platforms. Should support for OF
platforms that set the clock rate through clock-frequency be considered
unneeded in the future, the driver will only need to switch to
devm_v4l2_sensor_clk_get() without any other change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage copying deprecated behaviour for OF platforms in new drivers,
and lead to differences in behaviour between drivers. Instead, drivers
that need to preserve the deprecated OF behaviour should use the
devm_v4l2_sensor_clk_get_legacy() helper.
This driver supports OF platforms only. The "clocks" property has always
been specified as mandatory in the DT bindings and the "clock-frequency"
property has always been optional. Both properties were initially set in
the upstream DT sources. The driver retrieves the clock, retrieves the
clock rate from the "clock-frequency" property if available or uses a
fixed default otherwise, and sets the clock rate. This is deprecated
behaviour for OF.
Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This
preserves setting the clock rate on OF platforms. Should support for OF
platforms that set the clock rate through clock-frequency be considered
unneeded in the future, the driver will only need to switch to
devm_v4l2_sensor_clk_get() without any other change.
For all meaningful purposes, devm_v4l2_sensor_clk_get_legacy() returns
-EPROBE_DEFER in situations when the driver would want to defer probing.
Replace the hardcoded -EPROBE_DEFER error with propagating the error
code from devm_v4l2_sensor_clk_get_legacy().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage copying deprecated behaviour for OF platforms in new drivers,
and lead to differences in behaviour between drivers. Instead, drivers
that need to preserve the deprecated OF behaviour should use the
devm_v4l2_sensor_clk_get_legacy() helper.
This driver supports OF platforms only. No DT bindings are available.
The "clocks" and "clock-frequency" properties were initially both set in
the upstream DT sources. The driver retrieves the clock, retrieves the
clock rate from the "clock-frequency" property if available or uses a
fixed default otherwise, and sets the clock rate. This is deprecated
behaviour for OF.
Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This
preserves setting the clock rate on OF platforms. Should support for OF
platforms that set the clock rate through clock-frequency be considered
unneeded in the future, the driver will only need to switch to
devm_v4l2_sensor_clk_get() without any other change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage copying deprecated behaviour for OF platforms in new drivers,
and lead to differences in behaviour between drivers. Instead, drivers
that need to preserve the deprecated OF behaviour should use the
devm_v4l2_sensor_clk_get_legacy() helper.
This driver supports ACPI and OF platforms. The "clocks" and
"clock-frequency" properties were initially specified as mandatory in
the DT bindings and were both set in the upstream DT sources. The driver
retrieves the clock rate from the "clock-frequency" property. On OF
platforms, it retrieves the clock and sets its rate. If the rate does
not match the expected rate, the driver prints a warning. This is
correct behaviour for ACPI, and deprecated behaviour for OF.
Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This
preserves setting the clock rate on OF platforms. Should support for OF
platforms that set the clock rate through clock-frequency be considered
unneeded in the future, the driver will only need to switch to
devm_v4l2_sensor_clk_get() without any other change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov8856 and access
it from there instead, to simplify the driver.
While at it, fix a mistake in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage copying deprecated behaviour for OF platforms in new drivers,
and lead to differences in behaviour between drivers. Instead, drivers
that need to preserve the deprecated OF behaviour should use the
devm_v4l2_sensor_clk_get_legacy() helper.
This driver supports OF platforms only. The "clocks" property has always
been specified as mandatory in the DT bindings and the "clock-frequency"
property has never been allowed. The "clocks" property is set in the
upstream DT sources and the "clock-frequency" property isn't. The driver
retrieves the clock and sets its rate to a fixed value. It then
retrieves the rate from the clock, and fails probing if the value
doesn't match. This is deprecated behaviour for OF.
Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This
preserves setting the clock rate on OF platforms. Should support for OF
platforms that set the clock rate through clock-frequency be considered
unneeded in the future, the driver will only need to switch to
devm_v4l2_sensor_clk_get() without any other change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage copying deprecated behaviour for OF platforms in new drivers,
and lead to differences in behaviour between drivers. Instead, drivers
that need to preserve the deprecated OF behaviour should use the
devm_v4l2_sensor_clk_get_legacy() helper.
This driver supports OF platforms only. The "clocks" property has always
been specified as mandatory in the DT bindings and the "clock-frequency"
property has always been optional. Both the "clocks" and
"clock-frequency" properties are set in the upstream DT sources. The
driver retrieves the clock, retrieves the clock rate from the
"clock-frequency" property, and sets the clock rate to the retrieved
rate. If the rate does not match the expected rates, the driver fails
probing. This is deprecated behaviour for OF.
Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This
preserves setting the clock rate on OF platforms. Should support for OF
platforms that set the clock rate through clock-frequency be considered
unneeded in the future, the driver will only need to switch to
devm_v4l2_sensor_clk_get() without any other change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage copying deprecated behaviour for OF platforms in new drivers,
and lead to differences in behaviour between drivers. Instead, drivers
that need to preserve the deprecated OF behaviour should use the
devm_v4l2_sensor_clk_get_legacy() helper.
This driver supports OF platforms only. The "clocks" property has always
been specified as mandatory in the DT bindings and the "clock-frequency"
property has never been allowed. The "clocks" property has always been
set in the upstream DT sources, and the "clock-frequency" never. The
driver retrieves the clock, and sets its rate to a fixed value. This is
deprecated behaviour for OF.
Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This
preserves setting the clock rate on OF platforms. Should support for OF
platforms that set the clock rate through clock-frequency be considered
unneeded in the future, the driver will only need to switch to
devm_v4l2_sensor_clk_get() without any other change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage copying deprecated behaviour for OF platforms in new drivers,
and lead to differences in behaviour between drivers. Instead, drivers
that need to preserve the deprecated OF behaviour should use the
devm_v4l2_sensor_clk_get_legacy() helper.
This driver supports OF platforms only. The "clocks" and
"clock-frequency" properties were initially mandatory in the DT
bindings. The driver retrieves the clock, retrieves the clock rate from
the "clock-frequency" property, and sets the clock rate to the retrieved
rate. If the rate does not match one of the expected rates, the driver
fails probing. This is deprecated behaviour for OF.
Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This
preserves setting the clock rate on OF platforms. Should support for OF
platforms that set the clock rate through clock-frequency be considered
unneeded in the future, the driver will only need to switch to
devm_v4l2_sensor_clk_get() without any other change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov02a10 and
access it from there instead, to simplify the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage copying deprecated behaviour for OF platforms in new drivers,
and lead to differences in behaviour between drivers. Instead, drivers
that need to preserve the deprecated OF behaviour should use the
devm_v4l2_sensor_clk_get_legacy() helper.
This driver supports OF platforms only. The "clocks" and
"clock-frequency" properties were initially mandatory in the DT
bindings. The driver retrieves the clock, retrieves the clock rate from
the "clock-frequency" property, and sets the clock rate to the retrieved
rate. If the rate does not match one of the expected rates, the driver
fails probing. This is deprecated behaviour for OF.
Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This
preserves setting the clock rate on OF platforms. Should support for OF
platforms that set the clock rate through clock-frequency be considered
unneeded in the future, the driver will only need to switch to
devm_v4l2_sensor_clk_get() without any other change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage copying deprecated behaviour for OF platforms in new drivers,
and lead to differences in behaviour between drivers. Instead, drivers
that need to preserve the deprecated OF behaviour should use the
devm_v4l2_sensor_clk_get_legacy() helper.
This driver supports ACPI and OF platforms. The "clocks" property was
not initially specified as mandatory in the DT bindings, and the
"clock-frequency" property has never been allowed. The driver retrieves
the clock and its rate if present, and falls back to retrieving the rate
from the "clock-frequency" property otherwise. If the rate does not
match the expected rate, the driver fails probing. This is correct
behaviour for ACPI, and deprecated behaviour for OF.
Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This
preserves setting the clock rate on OF platforms. Should support for OF
platforms that set the clock rate through clock-frequency be considered
unneeded in the future, the driver will only need to switch to
devm_v4l2_sensor_clk_get() without any other change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct imx258 and access
it from there instead, to simplify the driver.
While at it, fix a mistake in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage copying deprecated behaviour for OF platforms in new drivers,
and lead to differences in behaviour between drivers. Instead, drivers
that need to preserve the deprecated OF behaviour should use the
devm_v4l2_sensor_clk_get_legacy() helper.
This driver supports OF platforms only. The "clocks" and
"clock-frequency" properties were initially mandatory in the DT bindings
and were both set in the upstream DT sources. The driver retrieves the
clock, retrieves and ignores the clock rate from the clock-frequency
property, and sets the clock rate to a fixed value. This is deprecated
behaviour for OF.
Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This
preserves setting the clock rate on OF platforms. Should support for OF
platforms that set the clock rate through clock-frequency be considered
unneeded in the future, the driver will only need to switch to
devm_v4l2_sensor_clk_get() without any other change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage copying deprecated behaviour for OF platforms in new drivers,
and lead to differences in behaviour between drivers. Instead, drivers
that need to preserve the deprecated OF behaviour should use the
devm_v4l2_sensor_clk_get_legacy() helper.
This driver supports OF platforms only. The "clocks" and
"clock-frequency" properties were initially mandatory in the DT bindings
and were both set in the upstream DT sources. The driver retrieves the
clock, retrieves and ignores the clock rate from the clock-frequency
property, and sets the clock rate to a fixed value. This is deprecated
behaviour for OF.
Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This
preserves setting the clock rate on OF platforms. Should support for OF
platforms that set the clock rate through clock-frequency be considered
unneeded in the future, the driver will only need to switch to
devm_v4l2_sensor_clk_get() without any other change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage copying deprecated behaviour for OF platforms in new drivers,
and lead to differences in behaviour between drivers. Instead, drivers
that need to preserve the deprecated OF behaviour should use the
devm_v4l2_sensor_clk_get_legacy() helper.
This driver supports OF platforms only. The "clocks" and
"clock-frequency" properties were initially mandatory in the DT bindings
and were both set in the upstream DT sources. The driver retrieves the
clock, retrieves and ignores the clock rate from the clock-frequency
property, and sets the clock rate to a fixed value. This is deprecated
behaviour for OF.
Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This
preserves setting the clock rate on OF platforms. Should support for OF
platforms that set the clock rate through clock-frequency be considered
unneeded in the future, the driver will only need to switch to
devm_v4l2_sensor_clk_get() without any other change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The et8ek8 driver supports programming different external clock
frequencies for different modes, but in practice all modes use a 9.6MHz
external clock. Drop support for this feature and use a hardcoded
frequency, in preparation for further refactoring of external clock
handling.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The recently introduced devm_v4l2_sensor_clk_get() helper aims at
simplifying sensor drivers by centralizing clock handling code, as well
as reducing cargo-cult and deprecated behaviour.
A set of drivers implement external clock handling in a non-standard
way. This can't be changed as there is a high risk of breaking existing
platforms, but keeping the code as-is creates a risk of new drivers
copying deprecated behaviour.
To fix this, introduce a new devm_v4l2_sensor_clk_get_legacy() helper
and use it in those driver. Compared to devm_v4l2_sensor_clk_get(), the
new helper takes the "clock-frequency" property into account and sets
the external clock rate on OF platforms, and adds the ability to specify
a fixed default or fallback clock rate in case the "clock-frequency"
property is not present.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI platforms only. It retrieves the clock rate
from the "clock-frequency" property. If the rate does not match the
expected rate, the driver fails probing. This is correct behaviour for
ACPI.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov9734 and access
it from there instead, to simplify the driver.
While at it, fix a mistake in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on a
subset of ACPI platforms, but are considered deprecated on OF platforms,
and do not support ACPI platforms that implement MIPI DisCo for Imaging.
Implementing them manually in drivers is deprecated, as that can
encourage cargo-cult and lead to differences in behaviour between
drivers. Instead, drivers should use the devm_v4l2_sensor_clk_get()
helper.
This driver supports ACPI and OF platforms. The "clocks" property has
always been specified as mandatory in the DT bindings and the
"clock-frequency" property has always been optional. The driver
retrieves the clock and its rate if present, and falls back to
retrieving the rate from the "clock-frequency" property otherwise. If
the rate does not match one of the supported rates, the driver fails
probing.
If a clock is available and the "clock-frequency" property is set, the
driver sets the rate of the clock to the value of the property. It does
however use the rate initially retrieved from the clock for further
calculations, which is a bug if the rates don't match, and would prevent
the sensor from functioning properly. We can therefore assume that this
case never occurs, and that the driver behaves correctly for ACPI, and
for OF platforms that comply with the documented DT bindings.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI and OF platforms. The "clocks" property has
always been specified as mandatory in the DT bindings, and the
"clock-frequency" property has never been allowed. The driver retrieves
the clock and its rate if present, and falls back to retrieving the rate
from the "clock-frequency" property otherwise. If the rate does not
match the expected rate, the driver fails probing. This is correct
behaviour for ACPI, and for OF platforms that comply with the documented
DT bindings.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
The behaviour is also unchanged on OF platforms that comply with the DT
bindings. Non-compliant platforms are not expected, but any regression
could easily be handled by switching to the
devm_v4l2_sensor_clk_get_legacy() helper designed to preserve
non-compliant behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI and OF platforms. The "clocks" property has
always been specified as mandatory in the DT bindings, and the
"clock-frequency" property has never been allowed. The driver retrieves
the clock and its rate if present, and falls back to retrieving the rate
from the "clock-frequency" property otherwise. If the rate does not
match the expected rate, the driver fails probing. This is correct
behaviour for ACPI, and for OF platforms that comply with the documented
DT bindings.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
The behaviour is also unchanged on OF platforms that comply with the DT
bindings. Non-compliant platforms are not expected, but any regression
could easily be handled by switching to the
devm_v4l2_sensor_clk_get_legacy() helper designed to preserve
non-compliant behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov5675 and access
it from there instead, to simplify the driver.
While at it, fix a mistake in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI and OF platforms. The "clocks" property has
always been specified as mandatory in the DT bindings, and the
"clock-frequency" property has never been allowed. The driver retrieves
the clock and its rate if present, and falls back to retrieving the rate
from the "clock-frequency" property otherwise. If the rate does not
match the expected rate, the driver fails probing. This is correct
behaviour for ACPI, and for OF platforms that comply with the documented
DT bindings.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
The behaviour is also unchanged on OF platforms that comply with the DT
bindings. Non-compliant platforms are not expected, but any regression
could easily be handled by switching to the
devm_v4l2_sensor_clk_get_legacy() helper designed to preserve
non-compliant behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov5670 and access
it from there instead, to simplify the driver.
While at it, fix a mistake in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports OF platforms only. The "clocks" property has always
been specified as mandatory in the DT bindings and the "clock-frequency"
property has never been allowed. The driver retrieves the clock and its
rate if present, and falls back to retrieving the rate from the
"clock-frequency" property otherwise. If the rate does not match the
expected rate, the driver fails probing. This is deprecated on OF
platforms, but behaves correctly on platforms that comply with the DT
bindings.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on OF platforms that comply with the DT bindings.
Non-compliant platforms are not expected, but any regression could
easily be handled by switching to the devm_v4l2_sensor_clk_get_legacy()
helper designed to preserve non-compliant behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI platforms only. It retrieves the clock if
present, and retrieves the clock rate from the "clock-frequency"
property. If the rate does not match the expected rate, the driver fails
probing. This is correct behaviour for ACPI.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov2740 and access
it from there instead, to simplify the driver.
While at it, fix mistakes in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI platforms only. It retrieves the clock if
present, and retrieves the clock rate from the "clock-frequency"
property. If the rate does not match the expected rate, the driver fails
probing. This is correct behaviour for ACPI.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov13b10 and
access it from there instead, to simplify the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI platforms only. It retrieves the clock rate
from the "clock-frequency" property. If the rate does not match the
expected rate, the driver prints a warning. This is correct behaviour
for ACPI.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov13858 and
access it from there instead, to simplify the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI and OF platforms. The "clocks" property is
specified as mandatory in the DT bindings and the "clock-frequency"
property is not allowed. The driver retrieves the clock and its rate if
present, and falls back to retrieving the rate from the
"clock-frequency" property otherwise. If the rate does not match the
expected rate, the driver fails probing. This is correct behaviour for
ACPI, and for OF platforms that comply with the documented DT bindings.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
The behaviour is also unchanged on OF platforms that comply with the DT
bindings. Non-compliant platforms are not expected, but any regression
could easily be handled by switching to the
devm_v4l2_sensor_clk_get_legacy() helper designed to preserve
non-compliant behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov08x40 and
access it from there instead, to simplify the driver.
While at it, fix mistakes in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
