| Age | Commit message (Collapse) | Author |
|---|
|
Since commit 3d1f08b032dc ("mtd: spinand: Use the external ECC engine
logic") the spinand_write_page() function ignores the errors returned
by spinand_wait(). Change the code to propagate those up to the stack
as it was done before the offending change.
Cc: stable@vger.kernel.org
Fixes: 3d1f08b032dc ("mtd: spinand: Use the external ECC engine logic")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The DMA map functions can fail and should be tested for errors.
Fixes: 4774fb0a48aa ("mtd: nand/fsmc: Add DMA support")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Rule: add
Link: https://lore.kernel.org/stable/20250702065806.20983-2-fourier.thomas%40gmail.com
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The DMA map functions can fail and should be tested for errors.
Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Some SLC NANDs like H27U4G8F2D expose a valid JEDEC ID yet they don't
support the read-retry mechanism, and fail.
Since SLC NANDs don't require read-retry, continue only if the bits per
cell is bigger than 1.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
It seems like what was intended is to test if the dma_map of the
previous line failed but the wrong dma address was passed.
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Rule: add
Link: https://lore.kernel.org/stable/20250702064515.18145-2-fourier.thomas%40gmail.com
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Currently we attempt to get the amount of flipped bits from a hardware
location which is reset on every subpage. Instead obtain total flipped
bits stat from hardware accumulator. In addition identify the correct
maximum subpage corrected bits.
Signed-off-by: David Regan <dregan@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The DMA map functions can fail and should be tested for errors.
Fixes: d8701fe890ec ("mtd: rawnand: renesas: Add new NAND controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
- GD5F1GM9UExxG (ID:c89101 3.3V)
- GD5F1GM9RExxG (ID:c88101 1.8V)
Both device feature:
- 1Gb density (1024 blocks)
- 2048-byte page size with 128-byte OOB
- 8-bit ECC requirement per 512 bytes
- Quad I/O Read support (opcode EBH)
- tPROG ≤ 300us typical page program time
Testing environment:
- Platform: Raspberry PI-5 (Linux raspberry 6.15.0-rc6-v8)
- Operations verified:
* Full device read/write/erase cycles on all blocks
* Nandspeed:
~ GD5F1GM9UE: 2.75MB/s read, 1.99MB/s write, 41.26MB/s erase
~ GD5F1GM9RE: 1.84MB/s read, 1.45MB/s write, 41.04MS/s erase
* Nandbiterrs: Both corredted 8-bit errors per 512 bytes
* Stresstest: Both 144k cycles 0 bad block growth
Full test log:
-U: https://gist.github.com/WT-886/b0f41fb50ddac3adc0020222c1f89b61
-R: https://gist.github.com/WT-886/8784e72f4632d519814928ff49225963
Datasheet:
-https://github.com/WT-886/DATASHEET/blob/main/GD5F1GM9-v1.0.pdf
Signed-off-by: Teng Wu <gigadevice2025@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Use kernel provided standard helper function to replace hard-coded
strings
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Move some Cirrus parts so they are grouped together alphabetically in
menuconfig. Also move the Maxim 5970 out of the middle of the Cirrus
parts and put it with the other Maxim parts. No functional changes
just alphabetising.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250709133103.3482015-1-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250704075432.3220321-1-sakari.ailus@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective
subsystems. Only 5 (out of the original 50) will remain in
kernel/sysctl.c file; these handle either sysctl or common arch
variables.
By decentralizing sysctl registrations, subsystem maintainers regain
control over their sysctl interfaces, improving maintainability and
reducing the likelihood of merge conflicts.
- docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented
in the check-sysctl-docs script. This script can now be used to
automatically identify if documentation is missing.
* tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (23 commits)
docs: Downgrade arm64 & riscv from titles to comment
docs: Replace spaces with tabs in check-sysctl-docs
docs: Remove colon from ctltable title in vm.rst
docs: Add awk section for ucount sysctl entries
docs: Use skiplist when checking sysctl admin-guide
docs: nixify check-sysctl-docs
sysctl: rename kern_table -> sysctl_subsys_table
kernel/sys.c: Move overflow{uid,gid} sysctl into kernel/sys.c
uevent: mv uevent_helper into kobject_uevent.c
sysctl: Removed unused variable
sysctl: Nixify sysctl.sh
sysctl: Remove superfluous includes from kernel/sysctl.c
sysctl: Remove (very) old file changelog
sysctl: Move sysctl_panic_on_stackoverflow to kernel/panic.c
sysctl: move cad_pid into kernel/pid.c
sysctl: Move tainted ctl_table into kernel/panic.c
Input: sysrq: mv sysrq into drivers/tty/sysrq.c
fork: mv threads-max into kernel/fork.c
parisc/power: Move soft-power into power.c
mm: move randomize_va_space into memory.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
"Notably, this contains the fix for for the GCC __init mess I created
with the kstack_erase annotations.
- staging: media: atomisp: Fix stack buffer overflow in
gmin_get_var_int().
I was asked to carry this fix, so here it is. :)
- fortify: Fix incorrect reporting of read buffer size
- kstack_erase: Fix missed export of renamed KSTACK_ERASE_CFLAGS
- compiler_types: Provide __no_kstack_erase to disable coverage only
on Clang"
* tag 'hardening-v6.17-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
compiler_types: Provide __no_kstack_erase to disable coverage only on Clang
fortify: Fix incorrect reporting of read buffer size
kstack_erase: Fix missed export of renamed KSTACK_ERASE_CFLAGS
staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"A quick summary: perf support for Branch Record Buffer Extensions
(BRBE), typical PMU hardware updates, small additions to MTE for
store-only tag checking and exposing non-address bits to signal
handlers, HAVE_LIVEPATCH enabled on arm64, VMAP_STACK forced on.
There is also a TLBI optimisation on hardware that does not require
break-before-make when changing the user PTEs between contiguous and
non-contiguous.
More details:
Perf and PMU updates:
- Add support for new (v3) Hisilicon SLLC and DDRC PMUs
- Add support for Arm-NI PMU integrations that share interrupts
between clock domains within a given instance
- Allow SPE to be configured with a lower sample period than the
minimum recommendation advertised by PMSIDR_EL1.Interval
- Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)
- Adjust the perf watchdog period according to cpu frequency changes
- Minor driver fixes and cleanups
Hardware features:
- Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)
- Support for reporting the non-address bits during a synchronous MTE
tag check fault (FEAT_MTE_TAGGED_FAR)
- Optimise the TLBI when folding/unfolding contiguous PTEs on
hardware with FEAT_BBM (break-before-make) level 2 and no TLB
conflict aborts
Software features:
- Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
and using the text-poke API for late module relocations
- Force VMAP_STACK always on and change arm64_efi_rt_init() to use
arch_alloc_vmap_stack() in order to avoid KASAN false positives
ACPI:
- Improve SPCR handling and messaging on systems lacking an SPCR
table
Debug:
- Simplify the debug exception entry path
- Drop redundant DBG_MDSCR_* macros
Kselftests:
- Cleanups and improvements for SME, SVE and FPSIMD tests
Miscellaneous:
- Optimise loop to reduce redundant operations in contpte_ptep_get()
- Remove ISB when resetting POR_EL0 during signal handling
- Mark the kernel as tainted on SEA and SError panic
- Remove redundant gcs_free() call"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64/gcs: task_gcs_el0_enable() should use passed task
arm64: Kconfig: Keep selects somewhat alphabetically ordered
arm64: signal: Remove ISB when resetting POR_EL0
kselftest/arm64: Handle attempts to disable SM on SME only systems
kselftest/arm64: Fix SVE write data generation for SME only systems
kselftest/arm64: Test SME on SME only systems in fp-ptrace
kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace
kselftest/arm64: Allow sve-ptrace to run on SME only systems
arm64/mm: Drop redundant addr increment in set_huge_pte_at()
kselftest/arm4: Provide local defines for AT_HWCAP3
arm64: Mark kernel as tainted on SAE and SError panic
arm64/gcs: Don't call gcs_free() when releasing task_struct
drivers/perf: hisi: Support PMUs with no interrupt
drivers/perf: hisi: Relax the event number check of v2 PMUs
drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
drivers/perf: hisi: Simplify the probe process for each DDRC version
perf/arm-ni: Support sharing IRQs within an NI instance
perf/arm-ni: Consolidate CPU affinity handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Standardize on the __ASSEMBLER__ macro that is provided by GCC and
Clang compilers and replace __ASSEMBLY__ with __ASSEMBLER__ in both
uapi and non-uapi headers
- Explicitly include <linux/export.h> in architecture and driver files
which contain an EXPORT_SYMBOL() and remove the include from the
files which do not contain the EXPORT_SYMBOL()
- Use the full title of "z/Architecture Principles of Operation" manual
and the name of a section where facility bits are listed
- Use -D__DISABLE_EXPORTS for files in arch/s390/boot to avoid
unnecessary slowing down of the build and confusing external kABI
tools that process symtypes data
- Print additional unrecoverable machine check information to make the
root cause analysis easier
- Move cmpxchg_user_key() handling to uaccess library code, since the
generated code is large anyway and there is no benefit if it is
inlined
- Fix a problem when cmpxchg_user_key() is executing a code with a
non-default key: if a system is IPL-ed with "LOAD NORMAL", and the
previous system used storage keys where the fetch-protection bit was
set for some pages, and the cmpxchg_user_key() is located within such
page, a protection exception happens
- Either the external call or emergency signal order is used to send an
IPI to a remote CPU. Use the external order only, since it is at
least as good and sometimes even better, than the emergency signal
- In case of an early crash the early program check handler prints more
or less random value of the last breaking event address, since it is
not initialized properly. Copy the last breaking event address from
the lowcore to pt_regs to address this
- During STP synchronization check udelay() can not be used, since the
first CPU modifies tod_clock_base and get_tod_clock_monotonic() might
return a non-monotonic time. Instead, busy-loop on other CPUs, while
the the first CPU actually handles the synchronization operation
- When debugging the early kernel boot using QEMU with the -S flag and
GDB attached, skip the decompressor and start directly in kernel
- Rename PAI Crypto event 4210 according to z16 and z17 "z/Architecture
Principles of Operation" manual
- Remove the in-kernel time steering support in favour of the new s390
PTP driver, which allows the kernel clock steered more precisely
- Remove a possible false-positive warning in pte_free_defer(), which
could be triggered in a valid case KVM guest process is initializing
* tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits)
s390/mm: Remove possible false-positive warning in pte_free_defer()
s390/stp: Default to enabled
s390/stp: Remove leap second support
s390/time: Remove in-kernel time steering
s390/sclp: Use monotonic clock in sclp_sync_wait()
s390/smp: Use monotonic clock in smp_emergency_stop()
s390/time: Use monotonic clock in get_cycles()
s390/pai_crypto: Rename PAI Crypto event 4210
scripts/gdb/symbols: make lx-symbols skip the s390 decompressor
s390/boot: Introduce jump_to_kernel() function
s390/stp: Remove udelay from stp_sync_clock()
s390/early: Copy last breaking event address to pt_regs
s390/smp: Remove conditional emergency signal order code usage
s390/uaccess: Merge cmpxchg_user_key() inline assemblies
s390/uaccess: Prevent kprobes on cmpxchg_user_key() functions
s390/uaccess: Initialize code pages executed with non-default access key
s390/skey: Provide infrastructure for executing with non-default access key
s390/uaccess: Make cmpxchg_user_key() library code
s390/page: Add memory clobber to page_set_storage_key()
s390/page: Cleanup page_set_storage_key() inline assemblies
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"This adds support for the AMD hardware feedback interface (HFI), by
Perry Yuan"
* tag 'x86-platform-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/itmt: Add debugfs file to show core priorities
platform/x86/amd: hfi: Add debugfs support
platform/x86/amd: hfi: Set ITMT priority from ranking data
cpufreq/amd-pstate: Disable preferred cores on designs with workload classification
x86/process: Clear hardware feedback history for AMD processors
platform/x86: hfi: Add power management callback
platform/x86: hfi: Add online and offline callback support
platform/x86: hfi: Init per-cpu scores for each class
platform/x86: hfi: Parse CPU core ranking data from shared memory
platform/x86: hfi: Introduce AMD Hardware Feedback Interface Driver
x86/msr-index: Add AMD workload classification MSRs
MAINTAINERS: Add maintainer entry for AMD Hardware Feedback Driver
Documentation/x86: Add AMD Hardware Feedback Interface documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Implement support for embedding EFI SBAT data (Secure Boot Advanced
Targeting: a secure boot image revocation facility) on x86 (Vitaly
Kuznetsov)
- Move the efi_enter_virtual_mode() initialization call from the
generic init code to x86 init code (Alexander Shishkin)
* tag 'x86-boot-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Implement support for embedding SBAT data for x86
x86/efi: Move runtime service initialization to arch/x86
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Locking primitives:
- Mark devm_mutex_init() as __must_check and fix drivers that didn't
check the return code (Thomas Weißschuh)
- Reorganize <linux/local_lock.h> to better expose the internal APIs
to local variables (Sebastian Andrzej Siewior)
- Remove OWNER_SPINNABLE in rwsem (Jinliang Zheng)
- Remove redundant #ifdefs in the mutex code (Ran Xiaokai)
Lockdep:
- Avoid returning struct in lock_stats() (Arnd Bergmann)
- Change `static const` into enum for LOCKF_*_IRQ_* (Arnd Bergmann)
- Temporarily use synchronize_rcu_expedited() in
lockdep_unregister_key() to speed things up. (Breno Leitao)
Rust runtime:
- Add #[must_use] to Lock::try_lock() (Jason Devers)"
* tag 'locking-core-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Speed up lockdep_unregister_key() with expedited RCU synchronization
locking/mutex: Remove redundant #ifdefs
locking/lockdep: Change 'static const' variables to enum values
locking/lockdep: Avoid struct return in lock_stats()
locking/rwsem: Use OWNER_NONSPINNABLE directly instead of OWNER_SPINNABLE
rust: sync: Add #[must_use] to Lock::try_lock()
locking/mutex: Mark devm_mutex_init() as __must_check
leds: lp8860: Check return value of devm_mutex_init()
spi: spi-nxp-fspi: Check return value of devm_mutex_init()
local_lock: Move this_cpu_ptr() notation from internal to main header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Map the SNP calling area pages too so that OVMF EFI fw can issue SVSM
calls properly with the goal of implementing EFI variable store in
the SVSM - a component which is trusted by the guest, vs in the
firmware, which is not
- Allow the kernel to handle #VC exceptions from EFI runtime services
properly when running as a SNP guest
- Rework and cleanup the SNP guest request issue glue code a bit
* tag 'x86_sev_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Let sev_es_efi_map_ghcbs() map the CA pages too
x86/sev/vc: Fix EFI runtime instruction emulation
x86/sev: Drop unnecessary parameter in snp_issue_guest_request()
x86/sev: Document requirement for linear mapping of guest request buffers
x86/sev: Allocate request in TSC_INFO_REQ on stack
virt: sev-guest: Contain snp_guest_request_ioctl in sev-guest
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Add helpers for WB{NO,}INVD with the purpose of using them in KVM and
thus diminish the number of invalidations needed. With preceding
cleanups, as always
* tag 'x86_core_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/lib: Add WBINVD and WBNOINVD helpers to target multiple CPUs
x86/lib: Add WBNOINVD helper functions
x86/lib: Drop the unused return value from wbinvd_on_all_cpus()
drm/gpu: Remove dead checks on wbinvd_on_all_cpus()'s return value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- i10nm:
- switch to using scnprintf()
- Add Granite Rapids-D support
- synopsys: Make sure ECC error and counter registers are cleared
during init/probing to avoid reporting stale errors
- igen6: Add Wildcat Lake SoCs support
- Make sure scrub features sysfs attributes are initialized properly
- Allocate memory repair sysfs attributes statically to reduce stack
usage
- Fix DIMM module size computation for DIMMs with total capacity which
is a non power-of-two number, in amd64_edac
- Do not be too dramatic when reporting disabled memory controllers in
igen6_edac
- Add support to ie31200_edac for the following SoCs:
- Core i5-14[67]00
- Bartless Lake-S SoCs
- Raptor Lake-HX
* tag 'edac_updates_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/{skx_common,i10nm}: Use scnprintf() for safer buffer handling
EDAC/synopsys: Clear the ECC counters on init
EDAC/ie31200: Add Intel Raptor Lake-HX SoCs support
EDAC/igen6: Add Intel Wildcat Lake SoCs support
EDAC/i10nm: Add Intel Granite Rapids-D support
EDAC/mem_repair: Reduce stack usage in edac_mem_repair_get_desc()
EDAC/igen6: Reduce log level to debug for absent memory controllers
EDAC/ie31200: Document which CPUs correspond to each Raptor Lake-S device ID
EDAC/ie31200: Enable support for Core i5-14600 and i7-14700
ie31200/EDAC: Add Intel Bartlett Lake-S SoCs support
|
|
* clk-pm:
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
Documentation: PM: *_autosuspend() functions update last busy time
PM: runtime: Mark last busy stamp in pm_request_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_sync_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_autosuspend()
PM: runtime: Document return values of suspend-related API functions
|
|
'clk-qcom' into clk-next
* clk-rockchip:
clk: rockchip: rk3568: Add PLL rate for 132MHz
* clk-thead:
clk: thead: th1520-ap: Describe mux clocks with clk_mux
clk: thead: th1520-ap: Correctly refer the parent of osc_12m
clk: thead: Mark essential bus clocks as CLK_IGNORE_UNUSED
* clk-microchip:
clk: at91: sam9x7: update pll clk ranges
* clk-imx:
MAINTAINERS: Update i.MX Clock Entry
clk: imx95-blk-ctl: Add clock for i.MX94 LVDS/Display CSR
clk: imx95-blk-ctl: Rename lvds and displaymix csr blk
clk: imx95-blk-ctl: Fix synchronous abort
dt-bindings: clock: Add support for i.MX94 LVDS/DISPLAY CSR
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
* clk-qcom: (65 commits)
dt-bindings: clock: qcom,sm4450-dispcc: Reference qcom,gcc.yaml
dt-bindings: clock: qcom,sm4450-camcc: Reference qcom,gcc.yaml
dt-bindings: clock: qcom,mmcc: Reference qcom,gcc.yaml
dt-bindings: clock: qcom,sm8150-camcc: Reference qcom,gcc.yaml
dt-bindings: clock: qcom: Remove double colon from description
clk: qcom: Add Video Clock controller (VIDEOCC) driver for Milos
dt-bindings: clock: qcom: document the Milos Video Clock Controller
clk: qcom: Add Graphics Clock controller (GPUCC) driver for Milos
dt-bindings: clock: qcom: document the Milos GPU Clock Controller
clk: qcom: Add Display Clock controller (DISPCC) driver for Milos
dt-bindings: clock: qcom: document the Milos Display Clock Controller
clk: qcom: Add Camera Clock controller (CAMCC) driver for Milos
dt-bindings: clock: qcom: document the Milos Camera Clock Controller
clk: qcom: Add Global Clock controller (GCC) driver for Milos
dt-bindings: clock: qcom: document the Milos Global Clock Controller
clk: qcom: common: Add support to register rcg dfs in qcom_cc_really_probe
clk: qcom: gcc-x1e80100: Add missing video resets
dt-bindings: clock: qcom,x1e80100-gcc: Add missing video resets
clk: qcom: videocc-sm8550: Add separate frequency tables for X1E80100
clk: qcom: videocc-sm8550: Allow building without SM8550/SM8560 GCC
...
|
|
and 'clk-amlogic' into clk-next
* clk-renesas: (42 commits)
clk: renesas: r9a08g045: Add MSTOP for coupled clocks as well
clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs
clk: renesas: r9a09g057: Add XSPI clock/reset
clk: renesas: r9a09g056: Add XSPI clock/reset
clk: renesas: rzv2h: Add fixed-factor module clocks with status reporting
clk: renesas: r9a09g057: Add support for xspi mux and divider
clk: renesas: r9a09g056: Add support for xspi mux and divider
clk: renesas: r9a09g077: Add RIIC module clocks
clk: renesas: r9a09g077: Add PLL2 and SDHI clock support
clk: renesas: rzv2h: Drop redundant base pointer from pll_clk
clk: renesas: r9a09g057: Add entries for the RSPIs
dt-bindings: clock: renesas,r9a09g077/87: Add SDHI_CLKHS clock ID
dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock
clk: renesas: rzv2h: Add missing include file
clk: renesas: rzv2h: Use devm_kmemdup_array()
clk: renesas: Add CPG/MSSR support to RZ/N2H SoC
clk: renesas: r9a09g077: Add PCLKL core clock
dt-bindings: clock: renesas,cpg-mssr: Document RZ/N2H support
dt-bindings: soc: renesas: Document RZ/N2H (R9A09G087) SoC
dt-bindings: clock: renesas,r9a09g077: Add PCLKL core clock ID
...
* clk-samsung:
clk: samsung: exynosautov920: add block hsi2 clock support
dt-bindings: clock: exynosautov920: add hsi2 clock definitions
dt-bindings: clock: exynosautov920: sort clock definitions
clk: samsung: exynos850: fix a comment
clk: samsung: gs101: fix alternate mout_hsi0_usb20_ref parent clock
clk: samsung: gs101: fix CLK_DOUT_CMU_G3D_BUSD
* clk-spacemit:
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
reset: spacemit: add support for SpacemiT CCU resets
clk: spacemit: mark K1 pll1_d8 as critical
clk: spacemit: define three reset-only CCUs
clk: spacemit: set up reset auxiliary devices
soc: spacemit: create a header for clock/reset registers
dt-bindings: soc: spacemit: define spacemit,k1-ccu resets
* clk-allwinner:
clk: sunxi-ng: ccu_nm: convert from round_rate() to determine_rate()
clk: sunxi-ng: ccu_nkmp: convert from round_rate() to determine_rate()
clk: sunxi-ng: ccu_nk: convert from round_rate() to determine_rate()
clk: sunxi-ng: ccu_gate: convert from round_rate() to determine_rate()
clk: sunxi-ng: v3s: Assign the de and tcon clocks to the video pll
clk: sunxi-ng: v3s: Fix de clock definition
clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset
dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset
* clk-amlogic:
clk: amlogic: s4: remove unused data
clk: amlogic: drop clk_regmap tables
clk: amlogic: get regmap with clk_regmap_init
clk: amlogic: remove unnecessary headers
clk: amlogic: axg-audio: use the auxiliary reset driver
|
|
'clk-xilinx' and 'clk-adi' into clk-next
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
* clk-bindings: (30 commits)
dt-bindings: clock: convert lpc1850-cgu.txt to yaml format
dt-bindings: clock: Convert qca,ath79-pll to DT schema
dt-bindings: clock: Convert nuvoton,npcm750-clk to DT schema
dt-bindings: clock: Convert moxa,moxart-clock to DT schema
dt-bindings: clock: Convert microchip,pic32mzda-clk to DT schema
dt-bindings: clock: Convert maxim,max9485 to DT schema
dt-bindings: clock: Convert qcom,krait-cc to DT schema
dt-bindings: clock: qcom: Remove double colon from description
dt-bindings: clock: convert lpc1850-ccu.txt to yaml format
dt-bindings: clock: Convert alphascale,asm9260-clock-controller to DT schema
dt-bindings: clock: Convert marvell,armada-370-corediv-clock to DT schema
dt-bindings: clock: Convert marvell,armada-3700-periph-clock to DT schema
dt-bindings: clock: Convert marvell,mvebu-core-clock to DT schema
dt-bindings: clock: Convert marvell,berlin2-clk to DT schema
dt-bindings: clock: Convert marvell,dove-divider-clock to DT schema
dt-bindings: clock: Convert marvell,armada-3700-tbg-clock to DT schema
dt-bindings: clock: Convert marvell-armada-370-gating-clock to DT schema
dt-bindings: clock: Convert marvell,armada-xp-cpu-clock to DT schema
dt-bindings: clock: Convert TI-NSPIRE clocks to DT schema
dt-bindings: clock: Convert lsi,axm5516-clks to DT schema
...
* clk-cleanup: (29 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: bcm: bcm2835: convert from round_rate() to determine_rate()
MAINTAINERS: Include clk.py under COMMON CLK FRAMEWORK entry
clk: ti: Simplify ti_find_clock_provider()
...
* clk-pwm:
clk: pwm: Make use of non-sleeping PWMs
clk: pwm: Don't reconfigure running PWM at probe time
clk: pwm: Convert to use pwm_apply_might_sleep()
clk: pwm: Let .get_duty_cycle() return the real duty cycle
* clk-hw-device:
clk: tests: add clk_hw_get_dev() and clk_hw_get_of_node() tests
clk: tests: Make clk_register_clk_parent_data_device_driver() common
clk: add a clk_hw helpers to get the clock device or device_node
* clk-xilinx:
clk: xilinx: vcu: Update vcu init/reset sequence
clk: xilinx: vcu: unregister pll_post only if registered correctly
* clk-adi:
clk: clk-axi-clkgen: fix coding style issues
clk: clk-axi-clkgen move to min/max()
clk: clk-axi-clkgen: detect axi_clkgen_limits at runtime
include: adi-axi-common: add new helper macros
include: linux: move adi-axi-common.h out of fpga
clk: clk-axi-clkgen: make sure to include mod_devicetable.h
clk: clk-axi-clkgen: fix fpfd_max frequency for zynq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide cleanup of struct cycle_counter const annotations.
The initial idea of making them const was correct as they were
seperate instances. When they got embedded into larger data
structures, which are even modified by the callback this got moot. The
only reason why this went unnoticed is that the required
container_of() casts the const attribute forcefully away.
Stop pretending that it is const"
* tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/timecounter: Fix the lie that struct cyclecounter is const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- Add support of forced affinity setting to yet offline CPUs for the
MIPS-GIC to ensure that the affinity of per CPU interrupts can be set
during the early bringup phase of a secondary CPU in the hotplug code
before the CPU is set online and interrupts are enabled
- Add support for the MIPS (RISC-V !?!?) P8700 SoC in the ACLINT_SSWI
interrupt chip
- Make the interrupt routing to RISV-V harts specification compliant so
it supports arbitrary hart indices
- Add a command line parameter and related handling to disable the
generic RISCV IMSIC mechanism on platforms which use a trap-emulated
IMSIC. Unfortunatly this is required because there is no mechanism
available to discover this programatically.
- Enable wakeup sources on the Renesas RZV2H driver
- Convert interrupt chip drivers, which use a open coded variant of
msi_create_parent_irq_domain() to use the new functionality
- Convert interrupt chip drivers, which use the old style two level
implementation of MSI support over to the MSI parent mechanism to
prepare for removing at least one of the three PCI/MSI backend
variants.
- The usual cleanups and improvements all over the place
* tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
irqchip/renesas-irqc: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
irqchip/renesas-intc-irqpin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
irqchip/riscv-imsic: Add kernel parameter to disable IPIs
irqchip/gic-v3: Fix GICD_CTLR register naming
irqchip/ls-scfg-msi: Fix NULL dereference in error handling
irqchip/ls-scfg-msi: Switch to use msi_create_parent_irq_domain()
irqchip/armada-370-xp: Switch to msi_create_parent_irq_domain()
irqchip/alpine-msi: Switch to msi_create_parent_irq_domain()
irqchip/alpine-msi: Convert to __free
irqchip/alpine-msi: Convert to lock guards
irqchip/alpine-msi: Clean up whitespace style
irqchip/sg2042-msi: Switch to msi_create_parent_irq_domain()
irqchip/loongson-pch-msi.c: Switch to msi_create_parent_irq_domain()
irqchip/imx-mu-msi: Convert to msi_create_parent_irq_domain() helper
irqchip/riscv-imsic: Convert to msi_create_parent_irq_domain() helper
irqchip/bcm2712-mip: Switch to msi_create_parent_irq_domain()
irqdomain: Add device pointer to irq_domain_info and msi_domain_info
irqchip/renesas-rzv2h: Remove unneeded includes
irqchip/renesas-rzv2h: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/aslint-sswi: Resolve hart index
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI update from Thomas Gleixner:
"A trivial cleanup in the PCI/MSI code to remove a duplicated back and
forth conversion"
* tag 'irq-msi-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Remove duplicated to_pci_dev() conversion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Remove redundant pm_runtime_mark_last_busy() calls
MMC host:
- Convert drivers to use devm_mmc_alloc_host()
- Remove redundant pm_runtime_mark_last_busy() calls
- renesas_sdhi:
- Add support for the RZ/T2H and RZ/N2H variants
- Fix incorrect auto retuning for an SDIO card
- rtsx_usb_sdmmc:
- Add 74 clocks in poweron flow
- Re-work the code in sd_set_power_mode()
- loongson2:
- Add driver for the Loongson-2K SD/SDIO controller
- Add support for the Loongson-2K2000 SD/SDIO/eMMC controller
- sdhci:
- Drop sdhci_free_host()/sdhci_pltfm_free() interface
- Remove the sdhci_free_host() and sdhci_pltfm_free() helpers
- sdhci-cadence: Add support for the Mobileye EyeQ controller
- sdhci-esdhc-imx:
- Optimize clock loopback selection
- Don't change pinctrl in suspend if wakeup source
- sdhci-msm:
- Add support for the Milos variant
- Add support for the qcs8300 variant
- Ensure SD card power isn't ON when card gets removed
- sdhci-of-k1: Disable HW busy detection"
* tag 'mmc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (102 commits)
mmc: loongson2: Unify the function prefixes for loongson2_mmc_pdata
mmc: loongson2: Fix error code in loongson2_mmc_resource_request()
dt-bindings: mmc: sdhci-msm: document the Milos SDHCI Controller
mmc: loongson2: prevent integer overflow in ret variable
mmc: Remove redundant pm_runtime_mark_last_busy() calls
mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
dt-bindings: mmc: Add sdhci compatible for qcs8300
mmc: sdhci-cadence: use of_property_present
mmc: loongson2: Add Loongson-2K2000 SD/SDIO/eMMC controller driver
dt-bindings: mmc: loongson,ls2k0500-mmc: Add compatible for Loongson-2K2000
mmc: loongson2: Add Loongson-2K SD/SDIO controller driver
dt-bindings: mmc: Add Loongson-2K SD/SDIO/eMMC controller binding
mmc: Convert ternary operator to str_true_false() helper
dt-bindings: mmc: renesas,sdhi: Document RZ/T2H and RZ/N2H support
mmc: sdhci-cadence: add Mobileye eyeQ support
dt-bindings: mmc: cdns: add Mobileye EyeQ MMC/SDHCI controller
mmc: rtsx_usb_sdmmc: Fix clang -Wimplicit-fallthrough in sd_set_power_mode()
mmc: cb710-mmc: Convert ternary operator to str_plural() helper
mmc: rtsx_usb_sdmmc: Add 74 clocks in poweron flow
mmc: rtsx_usb_sdmmc: Re-work the code in sd_set_power_mode()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Leave powered-on genpds on until ->sync_state() or late_initcall_sync
- Export a common ->sync_state() helper for genpd providers
- Add generic ->sync_state() support
- Add a bus/driver for genpd provider-devices
- Introduce dev_pm_genpd_is_on() for consumers
pmdomain providers:
- cpuidle-psci: Drop redundant ->sync_state() support
- cpuidle-riscv-sbi: Drop redundant ->sync_state() support
- imx: Set ISI panic write for imx8m-blk-ctrl
- qcom: Add support for Glymur and Milos RPMh power-domains
- qcom: Use of_genpd_sync_state() for power-domains
- rockchip: Add support for the RK3528 variant
- samsung: Fix splash-screen handover by enforcing a ->sync_state()
- sunxi: Add support for Allwinner A523's PCK600 power-controller
- tegra: Opt-out from genpd's common ->sync_state() support for pmc
- thead: Instantiate a GPU power sequencer via the auxiliary bus
- renesas: Move init to postcore_initcalls
- xilinx: Move ->sync_state() support to firmware driver
- xilinx: Use of_genpd_sync_state() for power-domains
pmdomain consumers:
- remoteproc: imx_rproc: Fixup the detect/attach procedure for
pre-booted cores"
* tag 'pmdomain-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (44 commits)
pmdomain: qcom: rpmhpd: Add Glymur RPMh Power Domains
dt-bindings: power: rpmpd: Add Glymur power domains
remoteproc: imx_rproc: detect and attach to pre-booted remote cores
remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
pmdomain: core: introduce dev_pm_genpd_is_on()
pmdomain: ti: Select PM_GENERIC_DOMAINS
pmdomain: sunxi: sun20i-ppu: change to tristate and enable for ARCH_SUNXI
pmdomain: sunxi: add driver for Allwinner A523's PCK-600 power controller
pmdomain: sunxi: sun20i-ppu: add A523 support
pmdomain: samsung: Fix splash-screen handover by enforcing a sync_state
cpuidle: riscv-sbi: Drop redundant sync_state support
cpuidle: psci: Drop redundant sync_state support
pmdomain: core: Leave powered-on genpds on until sync_state
pmdomain: core: Leave powered-on genpds on until late_initcall_sync
pmdomain: core: Default to use of_genpd_sync_state() for genpd providers
driver core: Add dev_set_drv_sync_state()
pmdomain: core: Add common ->sync_state() support for genpd providers
driver core: Export get_dev_from_fwnode()
firmware: xilinx: Use of_genpd_sync_state()
firmware: xilinx: Don't share zynqmp_pm_init_finalize()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C Core:
- prevent double-free of an fwnode if it is a software node
- use recent helpers instead of custom ACPI or outdated OF ones
- add a more elaborate description of a message flag
Cleanups and refactorings:
- lpi2c, riic, st, stm32f7: general improvements
- riic: support more flexible IRQ configurations
- tegra: fix documentation
Improvements:
- lpi2c: improve register polling and add atomic transfer
- imx: use guarded spinlocks
New hardware support:
- Samsung Exynos 2200
- Renesas RZ/T2H (R9A09G077), RZ/N2H (R9A09G087)
DT binding:
- rk3x: enable power domains
- nxp: support clock property"
* tag 'i2c-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Fix double-free of fwnode in i2c_unregister_device()
i2c: lpi2c: implement xfer_atomic callback
i2c: lpi2c: use readl_poll_timeout() for register polling
dt-bindings: i2c: i2c-rk3x: Allow use of a power-domain
dt-bindings: i2c: exynos5: add samsung,exynos2200-hsi2c compatible
i2c: lpi2c: convert to use secs_to_jiffies()
i2c: st: Use min() to improve code
i2c: imx: use guard to take spinlock
i2c: stm32f7: Use str_on_off() helper
dt-bindings: i2c: nxp,pnx-i2c: allow clocks property
i2c: riic: Add support for RZ/T2H SoC
i2c: riic: Move generic compatible string to end of array
i2c: riic: Pass IRQ desc array as part of OF data
dt-bindings: i2c: renesas,riic: Document RZ/T2H and RZ/N2H support
dt-bindings: i2c: renesas,riic: Move ref for i2c-controller.yaml to the end
i2c: tegra: Add missing kernel-doc for dma_dev member
i2c: Clarify behavior of I2C_M_RD flag
i2c: mux: pca954x: Use dev_fwnode()
i2c: acpi: Replace custom code with device_match_acpi_handle()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, more drivers get enabled in the defconfigs, to support newly
added hardware drivers.
There is one change for Tegra that modifies the Kconfig file at the
same time, and the NXP arm32 defconfigs get a refresh"
* tag 'soc-defconfig-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arm: multi_v7_defconfig: Enable TPS65219 regulator
arm: omap2plus_defconfig: Enable TPS65219 regulator
arm64: defconfig: Enable Tegra241 and Tegra264
riscv: defconfig: spacemit: enable sdhci driver for K1 SoC
riscv: defconfig: Enable PWM support for SpacemiT K1 SoC
riscv: defconfig: Remove CONFIG_SND_SOC_STARFIVE=m
arm64: defconfig: Enable Tegra HSP and BPMP
ARM: imx_v6_v7_defconfig: select CONFIG_USB_HSIC_USB3503
ARM: imx_v6_v7_defconfig: select CONFIG_INPUT_PWM_BEEPER
ARM: imx_v6_v7_defconfig: cleanup with savedefconfig
ARM: mxs_defconfig: select new drivers used by imx28-amarula-rmm
ARM: mxs_defconfig: Cleanup mxs_defconfig
arm64: defconfig: enable further Rockchip platform drivers
arm64: defconfig: enable Samsung PMIC over ACPM
arm64: defconfig: enable Maxim max77759 driver
ARM: configs: sama5_defconfig: Select CONFIG_WILC1000_SDIO
ARM: shmobile: defconfig: Refresh for v6.16-rc2
arm64: defconfig: Enable RZ/V2H(P) USB2 PHY controller reset driver
arm64: defconfig: add S32G RTC module support
arm64: defconfig: Drop unneeded unselectable sound drivers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC support from Arnd Bergmann:
"These five newly supported chips come with both devicetree
descriptions and the changes to wire them up to the build system for
easier bisection.
The chips in question are:
- Marvell PXA1908 was the first 64-bit mobile phone chip from Marvell
in the product line that started with the Digital StrongARM SA1100
based PDAs and continued with the Intel PXA2xx that dominated early
smartphones. This one only made it only into a few products before
the entire product line was cut in 2015.
- The QiLai SoC is made by RISC-V core designer Andes Technologies
and is in the 'Voyager' reference board in MicroATX form factor. It
uses four in-order AX45MP cores, which is the midrange product from
Andes.
- CIX P1 is one of the few Arm chips designed for small workstations,
and this one uses 12 Cortex-A720/A520 cores, making it also one of
the only ARMv9.2 machines that one can but at the moment.
- Axiado AX3000 is an embedded chip with relative small Cortex-A53
CPU cores described as a "Trusted Control/Compute Unit" that can be
used as a BMC in servers. In addition to the usual I/O, this one
comes with 10GBit ethernet and and a 4TOPS NPU.
- Sophgo SG2000 is an embedded chip that comes with both RISC-V and
Arm cores that can run Linux. This was already supported for RISC-V
but now it also works on Arm
One more chip, the Black Sesame C1200 did not make it in tirm for the
merge window"
* tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
arm64: defconfig: Enable rudimentary Sophgo SG2000 support
arm64: Add SOPHGO SOC family Kconfig support
arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
arm64: dts: sophgo: Add Duo Module 01
arm64: dts: sophgo: Add initial SG2000 SoC device tree
MAINTAINERS: Add entry for Axiado
arm64: defconfig: enable the Axiado family
arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
arm64: add Axiado SoC family
dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller
dt-bindings: serial: cdns: add Axiado AX3000 UART controller
dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant
dt-bindings: gpio: cdns: convert to YAML
dt-bindings: arm: axiado: add AX3000 EVK compatible strings
dt-bindings: vendor-prefixes: Add Axiado Corporation
MAINTAINERS: Add CIX SoC maintainer entry
arm64: dts: cix: Add sky1 base dts initial support
dt-bindings: clock: cix: Add CIX sky1 scmi clock id
arm64: defconfig: Enable CIX SoC
mailbox: add CIX mailbox driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs, and
new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly, the
SoC specific firmware on Tegra and Qualcomm get minor enhancements and
chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes"
* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
bus: del unnecessary init var
soc: fsl: qe: convert set_multiple() to returning an integer
pinctrl: rp1: use new GPIO line value setter callbacks
soc: hisilicon: kunpeng_hccs: Fix incorrect log information
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
memory: tegra: Add Tegra264 MC and EMC support
firmware: tegra: bpmp: Fix build failure for tegra264-only config
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates,
no major new features this development cycle. Stuff included in here
is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are
'obviously correct' :)"
* tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (100 commits)
usb: musb: omap2430: clean up probe error handling
usb: musb: omap2430: fix device leak at unbind
usb: gadget: udc: renesas_usb3: fix device leak at unbind
usb: dwc3: meson-g12a: fix device leaks at unbind
usb: dwc3: imx8mp: fix device leak at unbind
usb: musb: omap2430: enable compile testing
usb: gadget: udc: renesas_usb3: drop unused module alias
usb: xhci: print xhci->xhc_state when queue_command failed
usb: atm: cxacru: Merge cxacru_upload_firmware() into cxacru_heavy_init()
USB: serial: option: add Foxconn T99W709
usb: core: add urb->sgt parameter description
thunderbolt: Fix copy+paste error in match_service_id()
usb: typec: ucsi: Update power_supply on power role change
usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
usb: typec: fusb302: cache PD RX state
usb: typec: ucsi: yoga-c630: add DRM dependency
usb: gadget : fix use-after-free in composite_dev_cleanup()
usb: chipidea: imx: Add a missing blank line
usb: gadget: f_uac1: replace scnprintf() with sysfs_emit()
usb: usblp: clean up assignment inside if conditions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues"
* tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain
serial: 8250: fix panic due to PSLVERR
dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible
vt: defkeymap: Map keycodes above 127 to K_HOLE
vt: keyboard: Don't process Unicode characters in K_OFF mode
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: qcom-geni: move clock-rate logic to separate function
serial: qcom-geni: move resource control logic to separate functions
serial: qcom-geni: move resource initialization to separate function
soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms
dt-bindings: qcom: geni-se: describe SA8255p
dt-bindings: serial: describe SA8255p
serial: 8250_dw: Fix typo "notifer"
dt-bindings: serial: 8250: spacemit: set clocks property as required
dt-bindings: serial: renesas: Document RZ/V2N SCIF
serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build
tty: omit need_resched() before cond_resched()
serial: 8250_ni: Reorder local variables
serial: 8250_ni: Fix build warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging updates from Greg KH:
"Here is the "big" set of staging driver changes for 6.17-rc1. That's
in quotes as it really isn't all that big of a set of changes this
development cycle at all.
Major things that stand out are:
- gpib cleanups and tweaks with the majority of the big issues now
taken care of. Odds are it will move out of staging/ in the next
merge window if all goes well.
- more constant cleanups and layer removals from the rtl8723bs
driver. It's amazing how many layers deep they really are, all
cleanups here are great to see
- axis-fifo sysfs api removed and debugfs api added. The sysfs api
didn't work at all so obviously no one was using it. Add the same
information into debugfs as that's the proper place for it, and
make it actually work.
- Remaining changes is lots of small checkpatch cleanups, most of
which seem to have come from a Debconf session where people were
encouraged to submit their first kernel patch, a nice thing to see
happen again.
All of these have been in linux-next with no reported issues"
* tag 'staging-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (71 commits)
staging: rtl8723bs: remove redundant semicolon in basic_types.h
staging: gpib: Add init response codes for new ni-usb-hs+
staging: rtl8723bs: DoIQK_8723B is empty
staging: rtl8723bs: dm_CheckStatistics is empty
staging: rtl8723bs: hw_var_port_switch is empty
staging: rtl8723bs: _InitOtherVariable is empty
staging: rtl8723bs: rtw_get_encrypt_decrypt_from_registrypriv is empty
staging: rtl8723bs: rtl8723b_set_FwAoacRsvdPage_cmd is empty
staging: rtl8723bs: CheckFwRsvdPageContent is empty
staging: rtl8723bs: clean up redundant & parentheses
staging: axis-fifo: add debugfs interface for dumping fifo registers
staging: axis-fifo: remove sysfs interface
staging: nvec: Fix incorrect null termination of battery manufacturer
staging: gpib: fix typo
staging: sm750fb: fix CamelCase variable naming
staging: vme_user: fix spelling errors
staging: rtl8723bs: remove unnecessary braces in rtl8723b_cmd
staging: rtl8723bs: remove unnecessary commented code
staging: rtl8723bs: add missing blank line after declaration
staging: rtl8723bs: remove unnecessary comment separator lines
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #1
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
|
|
As per the i.MX93 TRM, section 67.3.2.1 "MOD register update", the value
of the TPM counter does NOT get updated when writing MOD.MOD unless
SC.CMOD != 0. Therefore, with the current code, assuming the following
sequence:
1) pwm_disable()
2) pwm_apply_might_sleep() /* period is changed here */
3) pwm_enable()
and assuming only one channel is active, if CNT.COUNT is higher than the
MOD.MOD value written during the pwm_apply_might_sleep() call then, when
re-enabling the PWM during pwm_enable(), the counter will end up resetting
after UINT32_MAX - CNT.COUNT + MOD.MOD cycles instead of MOD.MOD cycles as
normally expected.
Fix this problem by forcing a reset of the TPM counter before MOD.MOD is
written.
Fixes: 738a1cfec2ed ("pwm: Add i.MX TPM PWM driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://lore.kernel.org/r/20250728194144.22884-1-laurentiumihalcea111@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
The period generated by the hardware is
(PWMDWIDTH + 1) << CLKDIV) / freq
according to my tests with a signal analyser and also the documentation.
The current algorithm doesn't consider the `+ 1` part and so configures
slightly too high periods. The same issue exists for the duty cycle
setting. So subtract 1 from both the register values for period and
duty cycle. If period is 0, bail out, if duty_cycle is 0, just disable
the PWM which results in a constant low output.
Fixes: caf065f8fd58 ("pwm: Add MediaTek PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/6d1fa87a76f8020bfe3171529b8e19baffceab10.1753717973.git.u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Stop handling the clocks in pwm_mediatek_enable() and
pwm_mediatek_disable(). This is a preparing change for the next commit
that requires that clocks and the enable bit are handled separately.
Also move these two functions a bit further up in the source file to
make them usable in pwm_mediatek_config(), which is needed in the next
commit, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/55c94fe2917ece152ee1e998f4675642a7716f13.1753717973.git.u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into HEAD
Immutable branch for KVM tree to put the KVM patches from
https://lore.kernel.org/r/20250522233733.3176144-1-seanjc@google.com
ontop.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
KVM IRQ changes for 6.17
- Rework irqbypass to track/match producers and consumers via an xarray
instead of a linked list. Using a linked list leads to O(n^2) insertion
times, which is hugely problematic for use cases that create large numbers
of VMs. Such use cases typically don't actually use irqbypass, but
eliminating the pointless registration is a future problem to solve as it
likely requires new uAPI.
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *",
to avoid making a simple concept unnecessarily difficult to understand.
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC,
and PIT emulation at compile time.
- Drop x86's irq_comm.c, and move a pile of IRQ related code into irq.c.
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code.
- Inhibited AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation.
- Extend enable_ipiv module param support to SVM, by simply leaving IsRunning
clear in the vCPU's physical ID table entry.
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected by
erratum #1235, to allow (safely) enabling AVIC on such CPUs.
- Dedup x86's device posted IRQ code, as the vast majority of functionality
can be shared verbatime between SVM and VMX.
- Harden the device posted IRQ code against bugs and runtime errors.
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1)
instead of O(n).
- Generate GA Log interrupts if and only if the target vCPU is blocking, i.e.
only if KVM needs a notification in order to wake the vCPU.
- Decouple device posted IRQs from VFIO device assignment, as binding a VM to
a VFIO group is not a requirement for enabling device posted IRQs.
- Clean up and document/comment the irqfd assignment code.
- Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e.
ensure an eventfd is bound to at most one irqfd through the entire host,
and add a selftest to verify eventfd:irqfd bindings are globally unique.
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Two more bridge conversions to devm_drm_bridge_alloc that address a
warning now reported by the bridge core code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250724-petite-gray-foxhound-b4fbb8@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Support ECC in chromeos_pstore
- Allow to control power and data role via sysfs in cros_ec_typec
Improvements:
- Defer probe when the dependencies are not ready in cros_ec_typec
- Retry when a sensor is not ready in cros_ec_sensorhub
Fixes:
- Unregister the blocking notifier as well when unregistering the
struct cros_ec_device.
Cleanups:
- Remove redundant code and leverage more suitable helper macro in
chromeos_laptop
- Fix typo"
* tag 'chrome-platform-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Fix typo in CROS_USBPD_NOTIFY help text
platform/chrome: cros_ec_typec: Check ec platform device pointer
platform/chrome: cros_ec: Unregister notifier in cros_ec_unregister()
platform/chrome: cros_ec_typec: Add role swap ops
platform/chrome: chromeos_laptop: Replace open coded variant of DEFINE_RES_IRQ()
platform/chrome: chromeos_laptop: Remove duplicate check
platform/chrome: cros_ec_sensorhub: Retries when a sensor is not ready
platform/chrome: chromeos_pstore: Add ecc_size module parameter
platform/chrome: cros_ec_typec: Defer probe on missing EC parent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers from Ilpo Järvinen:
- alienware: Add more precise labels to fans
- amd/hsmp: Improve misleading probe errors (make the legacy driver
aware when HSMP is supported through the ACPI driver)
- amd/pmc: Add Lenovo Yoga 6 13ALCL6 to pmc quirk list
- drm/xe: Correct (D)VSEC information to support PMT crashlog feature
- fujitsu: Clamp charge threshold instead of returning an error
- ideapad: Expore change types
- intel/pmt:
- Add PMT Discovery driver
- Add API to retrieve telemetry regions by feature
- Fix crashlog NULL access
- Support Battlemage GPU (BMG) crashlog
- intel/vsec:
- Add Discovery feature
- Add feature dependency support using device links
- lenovo:
- Move lenovo drivers under drivers/platform/x86/lenovo/
- Add WMI drivers for Lenovo Gaming series
- Improve DMI handling
- oxpec:
- Add support for OneXPlayer X1 Mini Pro (Strix Point variant)
- Fix EC registers for G1 AMD
- samsung-laptop: Expose change types
- wmi: Fix WMI device naming issue (same GUID corner cases)
- x86-android-tables: Add ovc-capacity-table to generic battery nodes
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (63 commits)
platform/x86: oxpec: Add support for OneXPlayer X1 Mini Pro (Strix Point)
platform/x86: oxpec: Fix turbo register for G1 AMD
platform/x86/intel/pmt: support BMG crashlog
platform/x86/intel/pmt: use a version struct
platform/x86/intel/pmt: refactor base parameter
platform/x86/intel/pmt: add register access helpers
platform/x86/intel/pmt: decouple sysfs and namespace
platform/x86/intel/pmt: correct types
platform/x86/intel/pmt: re-order trigger logic
platform/x86/intel/pmt: use guard(mutex)
platform/x86/intel/pmt: mutex clean up
platform/x86/intel/pmt: white space cleanup
drm/xe: Correct BMG VSEC header sizing
drm/xe: Correct the rev value for the DVSEC entries
platform/x86/intel/pmt: fix a crashlog NULL pointer access
platform/x86: samsung-laptop: Expose charge_types
platform/x86/amd: pmc: Add Lenovo Yoga 6 13ALC6 to pmc quirk list
platform/x86: dell-uart-backlight: Use blacklight power constant
platform/x86/intel/pmt: fix build dependency for kunit test
platform/x86: lenovo: gamezone needs "other mode"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"Apart from the usual mix of new drivers (pwm-argon-fan-hat), adding
support for variants to existing drivers, minor improvements to both
drivers and docs, device tree documenation updates, the noteworthy
changes are:
- A hwmon companion driver to pwm-mc33xs2410 living in drivers/hwmon
and acked by Guenter Roeck
- chardev support for PWM devices. This leverages atomic PWM updates
to userspace and at the same time simplifies and accelerates PWM
configuration changes"
* tag 'pwm/for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (35 commits)
pwm: raspberrypi-poe: Fix spelling mistake "Firwmware" -> "Firmware"
hwmon: add support for MC33XS2410 hardware monitoring
pwm: mc33xs2410: add hwmon support
pwm: img: Remove redundant pm_runtime_mark_last_busy() calls
pwm: Expose PWM_WFHWSIZE in public header
dt-bindings: pwm: Convert lpc32xx-pwm.txt to yaml format
docs: pwm: Adapt Locking paragraph to reality
pwm: twl-led: Drop driver local locking
pwm: sun4i: Drop driver local locking
pwm: sti: Drop driver local locking
pwm: microchip-core: Drop driver local locking
pwm: lpc18xx-sct: Drop driver local locking
pwm: fsl-ftm: Drop driver local locking
pwm: clps711x: Drop driver local locking
pwm: atmel: Drop driver local locking
pwm: argon-fan-hat: Add Argon40 Fan HAT support
dt-bindings: pwm: argon40,fan-hat: Document Argon40 Fan HAT
dt-bindings: vendor-prefixes: Document Argon40
pwm: pwm-mediatek: Add support for PWM IP V3.0.2 in MT6991/MT8196
pwm: pwm-mediatek: Pass PWM_CK_26M_SEL from platform data
...
|
