| Age | Commit message (Collapse) | Author |
|---|
|
Expose the virtio_rtc clocks as PTP clocks to userspace, similar to
ptp_kvm. virtio_rtc can expose multiple clocks, e.g. a UTC clock and a
monotonic clock.
Userspace should distinguish different clocks through the name assigned by
the driver. In particular, UTC-like clocks can also be distinguished by if
and how leap seconds are smeared. udev rules such as the following can be
used to get different symlinks for different clock types:
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 0/variant 0", SYMLINK += "ptp_virtio"
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 1/variant 0", SYMLINK += "ptp_virtio_tai"
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 2/variant 0", SYMLINK += "ptp_virtio_monotonic"
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 3/variant 0", SYMLINK += "ptp_virtio_smear_unspecified"
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 3/variant 1", SYMLINK += "ptp_virtio_smear_noon_linear"
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 3/variant 2", SYMLINK += "ptp_virtio_smear_sls"
SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP type 4/variant 0", SYMLINK += "ptp_virtio_maybe_smeared"
The preferred PTP clock reading method is ioctl PTP_SYS_OFFSET_PRECISE2,
through the ptp_clock_info.getcrosststamp() op. For now,
PTP_SYS_OFFSET_PRECISE2 will return -EOPNOTSUPP through a weak function.
PTP_SYS_OFFSET_PRECISE2 requires cross-timestamping support for specific
clocksources, which will be added in the following. If the clocksource
specific code is enabled, check that the Virtio RTC device supports the
respective HW counter before obtaining an actual cross-timestamp from the
Virtio device.
The Virtio RTC device response time may be higher than the timekeeper
seqcount increment interval. Therefore, obtain the cross-timestamp before
calling get_device_system_crosststamp().
As a fallback, support the ioctl PTP_SYS_OFFSET_EXTENDED2 for all
platforms.
Assume that concurrency issues during PTP clock removal are avoided by the
posix_clock framework.
Kconfig recursive dependencies prevent virtio_rtc from implicitly enabling
PTP_1588_CLOCK, therefore just warn the user if PTP_1588_CLOCK is not
available. Since virtio_rtc should in the future also expose clocks as RTC
class devices, do not depend VIRTIO_RTC on PTP_1588_CLOCK.
Signed-off-by: Peter Hilber <quic_philber@quicinc.com>
Message-Id: <20250509160734.1772-3-quic_philber@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add the virtio_rtc module and driver core. The virtio_rtc module implements
a driver compatible with the proposed Virtio RTC device specification.
The Virtio RTC (Real Time Clock) device provides information about current
time. The device can provide different clocks, e.g. for the UTC or TAI time
standards, or for physical time elapsed since some past epoch. The driver
can read the clocks with simple or more accurate methods.
Implement the core, which interacts with the Virtio RTC device. Apart from
this, the core does not expose functionality outside of the virtio_rtc
module. Follow-up patches will expose PTP clocks and an RTC Class device.
Provide synchronous messaging, which is enough for the expected time
synchronization use cases through PTP clocks (similar to ptp_kvm) or RTC
Class device.
Signed-off-by: Peter Hilber <quic_philber@quicinc.com>
Message-Id: <20250509160734.1772-2-quic_philber@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Use the bvec_kmap_local helper rather than digging into the bvec
internals.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20250501142244.2888227-1-hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct kvec *", but the returned type will be
"struct iovec *". These have the same allocation size, so there is no
bug:
struct kvec {
void *iov_base; /* and that should *never* hold a userland pointer */
size_t iov_len;
};
struct iovec
{
void __user *iov_base; /* BSD uses caddr_t (1003.1g requires void *) */
__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
};
Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Message-Id: <20250426062214.work.334-kees@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The result size returned by virtio_pci_admin_dev_parts_get() is 8 bytes
larger than the actual result data size. This occurs because the
result_sg_size field of the command is filled with the result length
from virtqueue_get_buf(), which includes both the data size and an
additional 8 bytes of status.
This oversized result size causes two issues:
1. The state transferred to the destination includes 8 bytes of extra
data at the end.
2. The allocated buffer in the kernel may be smaller than the returned
size, leading to failures when reading beyond the allocated size.
The commit fixes this by subtracting the status size from the result of
virtqueue_get_buf().
This fix has been tested through live migrations with virtio-net,
virtio-net-transitional, and virtio-blk devices.
Fixes: 704806ca400e ("virtio: Extend the admin command to include the result size")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <1745318025-23103-1-git-send-email-israelr@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
PCI region request functions such as pci_request_region() currently have
the problem of becoming sometimes managed functions, if
pcim_enable_device() instead of pci_enable_device() was called. The PCI
subsystem wants to remove this deprecated behavior from its interfaces.
octeopn_ep enables its device with pcim_enable_device() (for VF. PF uses
manual management), but does so only to get automatic disablement. The
driver wants to manage its PCI resources for VF manually, without devres.
The easiest way not to use automatic resource management at all is by
also handling device enable- and disablement manually.
Replace pcim_enable_device() with pci_enable_device(). Add the necessary
calls to pci_disable_device().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Acked-by: Vamsi Attunuru <vattunuru@marvell.com>
Message-Id: <20250508085134.24084-2-phasta@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Philipp Stanner <<a href="mailto:phasta@kernel.org" target="_blank">phasta@kernel.org</a>><br>
Acked-by: Vamsi Attunuru <<a href="mailto:vattunuru@marvell.com" target="_blank">vattunuru@marvell.com</a>><br>
|
|
This reverts commit d6e020819612a4a06207af858e0978be4d3e3140.
The IS_DGFX check was put in place because error capture of buffer
objects is expected to be broken on devices with VRAM.
Userspace fix[1] to the impacted media driver has been submitted, merged
and a new driver release is out as 25.2.3 where the capture flag is
dropped on DG1 thus unblocking the usage of media driver on DG1.
[1] https://github.com/intel/media-driver/commit/93c07d9b4b96a78bab21f6acd4eb863f4313ea4a
Cc: stable@vger.kernel.org # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250522064127.24293-1-joonas.lahtinen@linux.intel.com
[Joonas: Update message to point out the merged userspace fix]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit d2dc30e0aa252830f908c8e793d3139d51321370)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The intel-media-driver is currently broken on DG1 because
it uses EXEC_CAPTURE with recovarable contexts. Relax the
check to allow that.
I've also submitted a fix for the intel-media-driver:
https://github.com/intel/media-driver/pull/1920
Cc: stable@vger.kernel.org # v6.0+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Testcase: igt/gem_exec_capture/capture-invisible
Fixes: 71b1669ea9bd ("drm/i915/uapi: tweak error capture on recoverable contexts")
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411144313.11660-2-ville.syrjala@linux.intel.com
(cherry picked from commit d6e020819612a4a06207af858e0978be4d3e3140)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Reported an IO hang and unrecoverable error in our testing environment.
After careful research, we found that bch_allocator_thread is stuck,
the call stack is as follows:
[<0>] __switch_to+0xbc/0x108
[<0>] __closure_sync+0x7c/0xbc [bcache]
[<0>] bch_prio_write+0x430/0x448 [bcache]
[<0>] bch_allocator_thread+0xb44/0xb70 [bcache]
[<0>] kthread+0x124/0x130
[<0>] ret_from_fork+0x10/0x18
Moreover, the RESERVE_BTREE type bucket slot are empty and journal_full
occurs at the same time.
When the cache disk is first used, the sb.nJournal_buckets defaults to 0.
So, only 8 RESERVE_BTREE type buckets are reserved. If RESERVE_BTREE type
buckets used up or btree_check_reserve() failed when request handle btree
split, the request will be repeatedly retried and wait for alloc thread to
fill in.
After the alloc thread fills the buckets, it will call bch_prio_write().
If journal_full occurs simultaneously at this time, journal_reclaim() and
btree_flush_write() will be called sequentially, journal_write cannot be
completed.
This is a low probability event, we believe that reserve more RESERVE_BTREE
buckets can avoid the worst situation.
Fixes: 682811b3ce1a ("bcache: fix for allocator and register thread race")
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/r/20250527051601.74407-4-colyli@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove constants MAX_NEED_GC and MAX_SAVE_PRIO in btree.c that have been unused
since initial commit.
Signed-off-by: Robert Pang <robertpang@google.com>
Signed-off-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/r/20250527051601.74407-3-colyli@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
1. LINE#1794 - LINE#1887 is some codes about function of
bch_cache_set_alloc().
2. LINE#2078 - LINE#2142 is some codes about function of
register_cache_set().
3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098.
1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
1795 {
...
1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) ||
1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) ||
1862 mempool_init_kmalloc_pool(&c->bio_meta, 2,
1863 sizeof(struct bbio) + sizeof(struct bio_vec) *
1864 bucket_pages(c)) ||
1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) ||
1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio),
1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) ||
1868 !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) ||
1869 !(c->moving_gc_wq = alloc_workqueue("bcache_gc",
1870 WQ_MEM_RECLAIM, 0)) ||
1871 bch_journal_alloc(c) ||
1872 bch_btree_cache_alloc(c) ||
1873 bch_open_buckets_alloc(c) ||
1874 bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages)))
1875 goto err;
^^^^^^^^
1876
...
1883 return c;
1884 err:
1885 bch_cache_set_unregister(c);
^^^^^^^^^^^^^^^^^^^^^^^^^^^
1886 return NULL;
1887 }
...
2078 static const char *register_cache_set(struct cache *ca)
2079 {
...
2098 c = bch_cache_set_alloc(&ca->sb);
2099 if (!c)
2100 return err;
^^^^^^^^^^
...
2128 ca->set = c;
2129 ca->set->cache[ca->sb.nr_this_dev] = ca;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...
2138 return NULL;
2139 err:
2140 bch_cache_set_unregister(c);
2141 return err;
2142 }
(1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and
call bch_cache_set_unregister()(LINE#1885).
(2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return.
(3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the
value to c->cache[], it means that c->cache[] is NULL.
LINE#1624 - LINE#1665 is some codes about function of cache_set_flush().
As (1), in LINE#1885 call
bch_cache_set_unregister()
---> bch_cache_set_stop()
---> closure_queue()
-.-> cache_set_flush() (as below LINE#1624)
1624 static void cache_set_flush(struct closure *cl)
1625 {
...
1654 for_each_cache(ca, c, i)
1655 if (ca->alloc_thread)
^^
1656 kthread_stop(ca->alloc_thread);
...
1665 }
(4) In LINE#1655 ca is NULL(see (3)) in cache_set_flush() then the
kernel crash occurred as below:
[ 846.712887] bcache: register_cache() error drbd6: cannot allocate memory
[ 846.713242] bcache: register_bcache() error : failed to register device
[ 846.713336] bcache: cache_set_free() Cache set 2f84bdc1-498a-4f2f-98a7-01946bf54287 unregistered
[ 846.713768] BUG: unable to handle kernel NULL pointer dereference at 00000000000009f8
[ 846.714790] PGD 0 P4D 0
[ 846.715129] Oops: 0000 [#1] SMP PTI
[ 846.715472] CPU: 19 PID: 5057 Comm: kworker/19:16 Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.el8_1.5es.3.x86_64 #1
[ 846.716082] Hardware name: ESPAN GI-25212/X11DPL-i, BIOS 2.1 06/15/2018
[ 846.716451] Workqueue: events cache_set_flush [bcache]
[ 846.716808] RIP: 0010:cache_set_flush+0xc9/0x1b0 [bcache]
[ 846.717155] Code: 00 4c 89 a5 b0 03 00 00 48 8b 85 68 f6 ff ff a8 08 0f 84 88 00 00 00 31 db 66 83 bd 3c f7 ff ff 00 48 8b 85 48 ff ff ff 74 28 <48> 8b b8 f8 09 00 00 48 85 ff 74 05 e8 b6 58 a2 e1 0f b7 95 3c f7
[ 846.718026] RSP: 0018:ffffb56dcf85fe70 EFLAGS: 00010202
[ 846.718372] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 846.718725] RDX: 0000000000000001 RSI: 0000000040000001 RDI: 0000000000000000
[ 846.719076] RBP: ffffa0ccc0f20df8 R08: ffffa0ce1fedb118 R09: 000073746e657665
[ 846.719428] R10: 8080808080808080 R11: 0000000000000000 R12: ffffa0ce1fee8700
[ 846.719779] R13: ffffa0ccc0f211a8 R14: ffffa0cd1b902840 R15: ffffa0ccc0f20e00
[ 846.720132] FS: 0000000000000000(0000) GS:ffffa0ce1fec0000(0000) knlGS:0000000000000000
[ 846.720726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 846.721073] CR2: 00000000000009f8 CR3: 00000008ba00a005 CR4: 00000000007606e0
[ 846.721426] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 846.721778] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 846.722131] PKRU: 55555554
[ 846.722467] Call Trace:
[ 846.722814] process_one_work+0x1a7/0x3b0
[ 846.723157] worker_thread+0x30/0x390
[ 846.723501] ? create_worker+0x1a0/0x1a0
[ 846.723844] kthread+0x112/0x130
[ 846.724184] ? kthread_flush_work_fn+0x10/0x10
[ 846.724535] ret_from_fork+0x35/0x40
Now, check whether that ca is NULL in LINE#1655 to fix the issue.
Signed-off-by: Linggang Zeng <linggang.zeng@easystack.cn>
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/r/20250527051601.74407-2-colyli@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the first cpu_node = of_cpu_device_node_get() fails then the cleanup.h
code will try to free "state_node" but it hasn't been initialized yet.
Declare the device_nodes where they are initialized to fix this.
Fixes: 5836ebeb4a2b ("cpuidle: psci: Avoid initializing faux device if no DT idle states are present")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVRcfU8O8sez1x7@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The error code is not set correctly on if kasprintf() fails. On the
first iteration it would return -EINVAL and subsequent iterations
would return success. Set it to -ENOMEM.
In real life, this allocation will not fail and if it did the system
will not boot so this change is mostly to silence static checker warnings
more than anything else.
Fixes: 04f53540f791 ("ACPI: MRRM: Add /sys files to describe memory ranges")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVTfEm-Jch7FuHG@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Call acpi_put_table() before returning the error code.
Fixes: e54b1dc1c4f0 ("ACPI: APEI: EINJ: Remove redundant calls to einj_get_available_error_type()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVRBok33LZhXcId@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* for-next/psci:
firmware: psci: Fix refcount leak in psci_dt_init
|
|
* for-next/perf:
perf/arm-cmn: Add CMN S3 ACPI binding
perf/arm-cmn: Initialise cmn->cpu earlier
perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create()
perf/arm-cmn: Fix REQ2/SNP2 mixup
perf: Do not enable by default during compile testing
perf: arm-ni: Fix missing platform_set_drvdata()
perf: arm-ni: Unregister PMUs on probe failure
perf/arm-cmn: Remove CMN-600 DTC domain special case
|
|
Fixes a probe failure that occurs when dual SPI controllers are
enabled and INTx interrupts are used. Reduces the minimum required
number of interrupt vectors to 1 and registers a shared ISR when
the allocated vectors are fewer than the number of controllers.
This change ensures that the probe succeeds even with limited
vectors, restoring INTx functionality when multiple SPI
controllers are present.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20250527103244.26861-1-thangaraj.s@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A representor netdev does not correspond to real hardware that needs to
be updated when setting the MAC address. The default eth_mac_addr() is
sufficient for simply updating the netdev's MAC address with validation.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747898036-1121904-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The presence of MACSEC block is currently figured out based
on the running silicon variant. This may not be correct all
the times since the MACSEC block can be fused out. Hence get
the macsec info from AF via mailbox.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747894548-4657-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
MACSEC block may be fused out on some silicons hence modify
get_hw_cap mailbox message to set a capability flag in its
response message based on MACSEC block availability.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747894528-4611-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for the MaxLinear MxL86110 Gigabit Ethernet PHY, a low-power,
cost-optimized transceiver supporting 10/100/1000 Mbps over twisted-pair
copper, compliant with IEEE 802.3.
The driver implements basic features such as:
- Device initialization
- RGMII interface timing configuration
- Wake-on-LAN support
- LED initialization and control via /sys/class/leds
This driver has been tested on multiple Variscite boards, including:
- VAR-SOM-MX93 (i.MX93)
- VAR-SOM-MX8M-PLUS (i.MX8MP)
Example boot log showing driver probe:
[ 7.692101] imx-dwmac 428a0000.ethernet eth0:
PHY [stmmac-0:00] driver [MXL86110 Gigabit Ethernet] (irq=POLL)
Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250521212821.593057-1-stefano.radaelli21@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current netlink API for WireGuard does not directly support removal
of allowed ips from a peer. A user can remove an allowed ip from a peer
in one of two ways:
1. By using the WGPEER_F_REPLACE_ALLOWEDIPS flag and providing a new
list of allowed ips which omits the allowed ip that is to be removed.
2. By reassigning an allowed ip to a "dummy" peer then removing that
peer with WGPEER_F_REMOVE_ME.
With the first approach, the driver completely rebuilds the allowed ip
list for a peer. If my current configuration is such that a peer has
allowed ips 192.168.0.2 and 192.168.0.3 and I want to remove 192.168.0.2
the actual transition looks like this.
[192.168.0.2, 192.168.0.3] <-- Initial state
[] <-- Step 1: Allowed ips removed for peer
[192.168.0.3] <-- Step 2: Allowed ips added back for peer
This is true even if the allowed ip list is small and the update does
not need to be batched into multiple WG_CMD_SET_DEVICE requests, as the
removal and subsequent addition of ips is non-atomic within a single
request. Consequently, wg_allowedips_lookup_dst and
wg_allowedips_lookup_src may return NULL while reconfiguring a peer even
for packets bound for ips a user did not intend to remove leading to
unintended interruptions in connectivity. This presents in userspace as
failed calls to sendto and sendmsg for UDP sockets. In my case, I ran
netperf while repeatedly reconfiguring the allowed ips for a peer with
wg.
/usr/local/bin/netperf -H 10.102.73.72 -l 10m -t UDP_STREAM -- -R 1 -m 1024
send_data: data send error: No route to host (errno 113)
netperf: send_omni: send_data failed: No route to host
While this may not be of particular concern for environments where peers
and allowed ips are mostly static, systems like Cilium manage peers and
allowed ips in a dynamic environment where peers (i.e. Kubernetes nodes)
and allowed ips (i.e. pods running on those nodes) can frequently
change making WGPEER_F_REPLACE_ALLOWEDIPS problematic.
The second approach avoids any possible connectivity interruptions
but is hacky and less direct, requiring the creation of a temporary
peer just to dispose of an allowed ip.
Introduce a new flag called WGALLOWEDIP_F_REMOVE_ME which in the same
way that WGPEER_F_REMOVE_ME allows a user to remove a single peer from
a WireGuard device's configuration allows a user to remove an ip from a
peer's set of allowed ips. This enables incremental updates to a
device's configuration without any connectivity blips or messy
workarounds.
A corresponding patch for wg extends the existing `wg set` interface to
leverage this feature.
$ wg set wg0 peer <PUBKEY> allowed-ips +192.168.88.0/24,-192.168.0.1/32
When '+' or '-' is prepended to any ip in the list, wg clears
WGPEER_F_REPLACE_ALLOWEDIPS and sets the WGALLOWEDIP_F_REMOVE_ME flag on
any ip prefixed with '-'.
Signed-off-by: Jordan Rife <jordan@jrife.io>
[Jason: minor style nits, fixes to selftest, bump of wireguard-tools version]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-5-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rather than manually validating flags against the various __ALL_*
constants, put this in the netlink policy description and have the upper
layer machinery check it for us.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-4-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to correctly identify the char array as "not a C string"
and thereby eliminate the warning:
../drivers/net/wireguard/cookie.c:29:56: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (9 chars into 8 available) [-Wunterminated-string-initialization]
29 | static const u8 mac1_key_label[COOKIE_KEY_LABEL_LEN] = "mac1----";
| ^~~~~~~~~~
../drivers/net/wireguard/cookie.c:30:58: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (9 chars into 8 available) [-Wunterminated-string-initialization]
30 | static const u8 cookie_key_label[COOKIE_KEY_LABEL_LEN] = "cookie--";
| ^~~~~~~~~~
../drivers/net/wireguard/noise.c:28:38: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (38 chars into 37 available) [-Wunterminated-string-initialization]
28 | static const u8 handshake_name[37] = "Noise_IKpsk2_25519_ChaChaPoly_BLAKE2s";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/wireguard/noise.c:29:39: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (35 chars into 34 available) [-Wunterminated-string-initialization]
29 | static const u8 identifier_name[34] = "WireGuard v1 zx2c4 Jason@zx2c4.com";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The arrays are always used with their fixed size, so use __nonstring.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-3-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert callers of dev_set_mac_address_user() to use struct
sockaddr_storage. Add sanity checks on dev->addr_len usage.
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20250521204619.2301870-8-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All users of dev_set_mac_address() are now using a struct sockaddr_storage.
Convert the internal data type to struct sockaddr_storage, drop the casts,
and update pointer types.
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250521204619.2301870-6-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
To support coming API type changes, switch to sockaddr_storage usage
internally.
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250521204619.2301870-5-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All the callers of inet_addr_is_any() have a sockaddr_storage-backed
sockaddr. Avoid casts and switch prototype to the actual object being
used.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250521204619.2301870-1-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
dmaengine xmit
In Dmaengine flow, driver maintains struct skbuf_dma_descriptor rings each
element of which corresponds to a skb. In Tx datapath, compare available
space in skb ring with number of skbs instead of skb fragments.
Replace x * (MAX_SKB_FRAGS) in netif_txq_completed_wake() and
netif_txq_maybe_stop() with x * (1 skb) to fix the comparison.
Fixes: 6a91b846af85 ("net: axienet: Introduce dmaengine support")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250521181608.669554-1-suraj.gupta2@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"Boot code changes:
- A large series of changes to reorganize the x86 boot code into a
better isolated and easier to maintain base of PIC early startup
code in arch/x86/boot/startup/, by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e36 ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86
boot code reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav
Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz
Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix
CONFIG_HARDENED_USERCOPY=y (Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean
Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary
(Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris
Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo
Molnar)
- Make smp_text_poke_batch_process() subsume
smp_text_poke_batch_finish() (Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs
(David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen
Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami
Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
<asm/amd/fch.h> (Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"
* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
x86/bugs: Fix spectre_v2 mitigation default on Intel
x86/bugs: Restructure ITS mitigation
x86/xen/msr: Fix uninitialized variable 'err'
x86/msr: Remove a superfluous inclusion of <asm/asm.h>
x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
x86/mm/64: Make 5-level paging support unconditional
x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
x86/mm/64: Always use dynamic memory layout
x86/bugs: Fix indentation due to ITS merge
x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
x86/mm: Fix kernel-doc descriptions of various pgtable methods
x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
x86/boot: Defer initialization of VM space related global variables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to the Intel
driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the x86 and PowerPC
platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker, Ian
Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang, Sandipan
Das, Thorsten Blum)"
* tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
perf/headers: Clean up <linux/perf_event.h> a bit
perf/uapi: Clean up <uapi/linux/perf_event.h> a bit
perf/uapi: Fix PERF_RECORD_SAMPLE comments in <uapi/linux/perf_event.h>
mips/perf: Remove driver-specific throttle support
xtensa/perf: Remove driver-specific throttle support
sparc/perf: Remove driver-specific throttle support
loongarch/perf: Remove driver-specific throttle support
csky/perf: Remove driver-specific throttle support
arc/perf: Remove driver-specific throttle support
alpha/perf: Remove driver-specific throttle support
perf/apple_m1: Remove driver-specific throttle support
perf/arm: Remove driver-specific throttle support
s390/perf: Remove driver-specific throttle support
powerpc/perf: Remove driver-specific throttle support
perf/x86/zhaoxin: Remove driver-specific throttle support
perf/x86/amd: Remove driver-specific throttle support
perf/x86/intel: Remove driver-specific throttle support
perf: Only dump the throttle log for the leader
perf: Fix the throttle logic for a group
perf/core: Add the is_event_in_freq_mode() helper to simplify the code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core & fair scheduler changes:
- Tweak wait_task_inactive() to force dequeue sched_delayed tasks
(John Stultz)
- Adhere to place_entity() constraints (Peter Zijlstra)
- Allow decaying util_est when util_avg > CPU capacity (Pierre
Gondois)
- Fix up wake_up_sync() vs DELAYED_DEQUEUE (Xuewen Yan)
Energy management:
- Introduce sched_update_asym_prefer_cpu() (K Prateek Nayak)
- cpufreq/amd-pstate: Update asym_prefer_cpu when core rankings
change (K Prateek Nayak)
- Align uclamp and util_est and call before freq update (Xuewen Yan)
CPU isolation:
- Make use of more than one housekeeping CPU (Phil Auld)
RT scheduler:
- Fix race in push_rt_task() (Harshit Agarwal)
- Add kernel cmdline option for rt_group_sched (Michal Koutný)
Scheduler topology support:
- Improve topology_span_sane speed (Steve Wahl)
Scheduler debugging:
- Move and extend the sched_process_exit() tracepoint (Andrii
Nakryiko)
- Add RT_GROUP WARN checks for non-root task_groups (Michal Koutný)
- Fix trace_sched_switch(.prev_state) (Peter Zijlstra)
- Untangle cond_resched() and live-patching (Peter Zijlstra)
Fixes and cleanups:
- Misc fixes and cleanups (K Prateek Nayak, Michal Koutný, Peter
Zijlstra, Xuewen Yan)"
* tag 'sched-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
sched/uclamp: Align uclamp and util_est and call before freq update
sched/util_est: Simplify condition for util_est_{en,de}queue()
sched/fair: Fixup wake_up_sync() vs DELAYED_DEQUEUE
sched,livepatch: Untangle cond_resched() and live-patching
sched/core: Tweak wait_task_inactive() to force dequeue sched_delayed tasks
sched/fair: Adhere to place_entity() constraints
sched/debug: Print the local group's asym_prefer_cpu
cpufreq/amd-pstate: Update asym_prefer_cpu when core rankings change
sched/topology: Introduce sched_update_asym_prefer_cpu()
sched/fair: Use READ_ONCE() to read sg->asym_prefer_cpu
sched/isolation: Make use of more than one housekeeping cpu
sched/rt: Fix race in push_rt_task
sched: Add annotations to RT_GROUP_SCHED fields
sched: Add RT_GROUP WARN checks for non-root task_groups
sched: Do not construct nor expose RT_GROUP_SCHED structures if disabled
sched: Bypass bandwitdh checks with runtime disabled RT_GROUP_SCHED
sched: Skip non-root task_groups with disabled RT_GROUP_SCHED
sched: Add commadline option for RT_GROUP_SCHED toggling
sched: Always initialize rt_rq's task_group
sched: Remove unneeed macro wrap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Large rework of the protected key crypto code to allow for
asynchronous handling without memory allocation
- Speed up system call entry/exit path by re-implementing lazy ASCE
handling
- Add module autoload support for the diag288_wdt watchdog device
driver
- Get rid of s390 specific strcpy() and strncpy() implementations, and
switch all remaining users to strscpy() when possible
- Various other small fixes and improvements
* tag 's390-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (51 commits)
s390/pci: Serialize device addition and removal
s390/pci: Allow re-add of a reserved but not yet removed device
s390/pci: Prevent self deletion in disable_slot()
s390/pci: Remove redundant bus removal and disable from zpci_release_device()
s390/crypto: Extend protected key conversion retry loop
s390/pci: Fix __pcilg_mio_inuser() inline assembly
s390/ptrace: Always inline regs_get_kernel_stack_nth() and regs_get_register()
s390/thread_info: Cleanup header includes
s390/extmem: Add workaround for DCSS unload diag
s390/crypto: Rework protected key AES for true asynch support
s390/cpacf: Rework cpacf_pcc() to return condition code
s390/mm: Fix potential use-after-free in __crst_table_upgrade()
s390/mm: Add mmap_assert_write_locked() check to crst_table_upgrade()
s390/string: Remove strcpy() implementation
s390/con3270: Use strscpy() instead of strcpy()
s390/boot: Use strspcy() instead of strcpy()
s390: Simple strcpy() to strscpy() conversions
s390/pkey/crypto: Introduce xflags param for pkey in-kernel API
s390/pkey: Provide and pass xflags within pkey and zcrypt layers
s390/uv: Remove uv_get_secret_metadata function
...
|
|
Add mailbox controller driver for CV18XX SoCs, which provides 8 channels
and each channel has an 8-byte FIFO.
Signed-off-by: Yuntao Dai <d1581209858@live.com>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Use guard and scoped_guard for chan->lock and mbox->poll_hrt_lock to
simplify code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Use guard and scoped_guard for con_mutex to simplify code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Commit e898d9cdd3a9("mailbox: Add device-managed registration functions")
introduced device-managed API for mailbox, but in the past 7 years,
there is no user for devm_mbox_controller_unregister. So remove it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
In case of_property_match_string fails, it makes more sense
to return its error value to caller, not force the value to
ERR_PTR(-EINVAL).
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
&chan->lock is not supposed to protect 'chan->mbox'.
And in __mbox_bind_client, try_module_get is also not protected
by &chan->lock. So move module_put out of the lock protected
region.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Use dev_err to show the error log instead of using dev_dbg.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add cmdq_gctl_value_toggle() to configure GCE_CTRL_BY_SW and GCE_DDR_EN
together in the same GCE_GCTL_VALUE register.
For the SoCs whose GCE is located in MMINFRA and uses MMINFRA_AO power,
this allows it to be written without enabling the clocks. Otherwise, all
GCE registers should be written after the GCE clocks are enabled.
Move this function into cmdq_runtime_resume() and cmdq_runtime_suspend()
to ensure it is called when the GCE clock is enabled.
Fixes: 7abd037aa581 ("mailbox: mtk-cmdq: add gce ddr enable support flow")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
i.MX95 features several processing domains, Cortex-M7, Cortex-A55
secure, Cortex-A55 non-secure. Each domain could communicate with
SCMI firmware with a dedicated MU. But the current NXP SCMI firmware
is not a RTOS, all processing logic codes are in interrupt context.
So if high priority Cortex-M7 is communicating with SCMI firmware and
requires a bit more time to handle the SCMI call, Linux MU TXDB_V2
will be timeout with high possiblity in 1000us(the current value in
imx-mailbox.c). Per NXP SCMI firmware design, if timeout, there is
no recover logic, so SCMI agents should never timeout and always
wait until the check condition met.
Based on the upper reason, enlarge the timeout value to 10ms which
is less chance to timeout, and retry if timeout really happends.
Fixes: 5bfe4067d350 ("mailbox: imx: support channel type tx doorbell v2")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
If COMPILE_TEST is y but RISCV_SBI is n, build fails:
drivers/mailbox/mailbox-mchp-ipc-sbi.c: In function 'mchp_ipc_sbi_chan_send':
drivers/mailbox/mailbox-mchp-ipc-sbi.c:119:23: error: storage size of 'ret' isn't known
struct sbiret ret;
^~~
CC drivers/nvmem/lpc18xx_otp.o
drivers/mailbox/mailbox-mchp-ipc-sbi.c:121:15: error: implicit declaration of function 'sbi_ecall' [-Werror=implicit-function-declaration]
ret = sbi_ecall(SBI_EXT_MICROCHIP_TECHNOLOGY, command, channel,
^~~~~~~~~
move COMPILE_TEST to ARCH_MICROCHIP dependency as other drivers.
Fixes: e4b1d67e7141 ("mailbox: add Microchip IPC support")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"This is only a small pull request with fixes, as possible features
moved to +1 release"
* tag 'tpmdd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_crb: ffa_tpm: fix/update comments describing the CRB over FFA ABI
tpm_crb_ffa: use dev_xx() macro to print log
tpm_ffa_crb: access tpm service over FF-A direct message request v2
tpm: remove kmalloc failure error message
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Fix memcpy_sglist to handle partially overlapping SG lists
- Use memcpy_sglist to replace null skcipher
- Rename CRYPTO_TESTS to CRYPTO_BENCHMARK
- Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS
- Hide CRYPTO_MANAGER
- Add delayed freeing of driver crypto_alg structures
Compression:
- Allocate large buffers on first use instead of initialisation in scomp
- Drop destination linearisation buffer in scomp
- Move scomp stream allocation into acomp
- Add acomp scatter-gather walker
- Remove request chaining
- Add optional async request allocation
Hashing:
- Remove request chaining
- Add optional async request allocation
- Move partial block handling into API
- Add ahash support to hmac
- Fix shash documentation to disallow usage in hard IRQs
Algorithms:
- Remove unnecessary SIMD fallback code on x86 and arm/arm64
- Drop avx10_256 xts(aes)/ctr(aes) on x86
- Improve avx-512 optimisations for xts(aes)
- Move chacha arch implementations into lib/crypto
- Move poly1305 into lib/crypto and drop unused Crypto API algorithm
- Disable powerpc/poly1305 as it has no SIMD fallback
- Move sha256 arch implementations into lib/crypto
- Convert deflate to acomp
- Set block size correctly in cbcmac
Drivers:
- Do not use sg_dma_len before mapping in sun8i-ss
- Fix warm-reboot failure by making shutdown do more work in qat
- Add locking in zynqmp-sha
- Remove cavium/zip
- Add support for PCI device 0x17D8 to ccp
- Add qat_6xxx support in qat
- Add support for RK3576 in rockchip-rng
- Add support for i.MX8QM in caam
Others:
- Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up
- Add new SEV/SNP platform shutdown API in ccp"
* tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits)
x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining
crypto: qat - add missing header inclusion
crypto: api - Redo lookup on EEXIST
Revert "crypto: testmgr - Add hash export format testing"
crypto: marvell/cesa - Do not chain submitted requests
crypto: powerpc/poly1305 - add depends on BROKEN for now
Revert "crypto: powerpc/poly1305 - Add SIMD fallback"
crypto: ccp - Add missing tee info reg for teev2
crypto: ccp - Add missing bootloader info reg for pspv5
crypto: sun8i-ce - move fallback ahash_request to the end of the struct
crypto: octeontx2 - Use dynamic allocated memory region for lmtst
crypto: octeontx2 - Initialize cptlfs device info once
crypto: xts - Only add ecb if it is not already there
crypto: lrw - Only add ecb if it is not already there
crypto: testmgr - Add hash export format testing
crypto: testmgr - Use ahash for generic tfm
crypto: hmac - Add ahash support
crypto: testmgr - Ignore EEXIST on shash allocation
crypto: algapi - Add driver template support to crypto_inst_setname
crypto: shash - Set reqsize in shash_alg
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Cleanups for the kernel's CRC (cyclic redundancy check) code:
- Use __ro_after_init where appropriate
- Remove unnecessary static_key on s390
- Rename some source code files
- Rename the crc32 and crc32c crypto API modules
- Use subsys_initcall instead of arch_initcall
- Restore maintainers for crc_kunit.c
- Fold crc16_byte() into crc16.c
- Add some SPDX license identifiers"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc32: add SPDX license identifier
lib/crc16: unexport crc16_table and crc16_byte()
w1: ds2406: use crc16() instead of crc16_byte() loop
MAINTAINERS: add crc_kunit.c back to CRC LIBRARY
lib/crc: make arch-optimized code use subsys_initcall
crypto: crc32 - remove "generic" from file and module names
x86/crc: drop "glue" from filenames
sparc/crc: drop "glue" from filenames
s390/crc: drop "glue" from filenames
powerpc/crc: rename crc32-vpmsum_core.S to crc-vpmsum-template.S
powerpc/crc: drop "glue" from filenames
arm64/crc: drop "glue" from filenames
arm/crc: drop "glue" from filenames
s390/crc32: Remove no-op module init and exit functions
s390/crc32: Remove have_vxrs static key
lib/crc: make the CPU feature static keys __ro_after_init
|
|
The function mlx5_query_nic_vport_qkey_viol_cntr() calls the function
mlx5_query_nic_vport_context() but does not check its return value. This
could lead to undefined behavior if the query fails. A proper
implementation can be found in mlx5_nic_vport_query_local_lb().
Add error handling for mlx5_query_nic_vport_context(). If it fails, free
the out buffer via kvfree() and return error code.
Fixes: 9efa75254593 ("net/mlx5_core: Introduce access functions to query vport RoCE fields")
Cc: stable@vger.kernel.org # v4.5
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250521133620.912-1-vulab@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When enabling 1-step timestamping for ptp frames that are over udpv4 or
udpv6 then the inserted timestamp is added at the wrong offset in the
frame, meaning that will modify the frame at the wrong place, so the
frame will be malformed.
To fix this, the HW needs to know which kind of frame it is to know
where to insert the timestamp. For that there is a field in the IFH that
says the PDU_TYPE, which can be NONE which is the default value,
IPV4 or IPV6. Therefore make sure to set the PDU_TYPE so the HW knows
where to insert the timestamp.
Like I mention before the issue is not seen with L2 frames because by
default the PDU_TYPE has a value of 0, which represents the L2 frames.
Fixes: 77eecf25bd9d2f ("net: lan966x: Update extraction/injection for timestamping")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250521124159.2713525-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge updates related to system sleep handling and runtime PM for 6.16-rc1:
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla).
- Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki).
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás).
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum).
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki).
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel).
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang).
- Add missing wakeup source attribute relax_count to sysfs and
remove the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu).
- Add configurable pm_test delay for hibernation (Zihuan Zhang).
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter).
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki).
* pm-runtime:
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
PM: sysfs: Move debug runtime PM attributes to runtime_attrs[]
PM: runtime: Add new devm functions
* pm-sleep:
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: sleep: Introduce pm_sleep_transition_in_progress()
PM: sleep: Introduce pm_suspend_in_progress()
PM: sleep: Print PM debug messages during hibernation
ucsi_ccg: Disable async suspend in ucsi_ccg_probe()
PM: hibernate: add configurable delay for pm_test
PM: wakeup: Delete space in the end of string shown by pm_show_wakelocks()
PM: wakeup: Add missing wakeup source attribute relax_count
PM: sleep: Remove unnecessary !!
PM: sleep: Use two lines for "Restarting..." / "done" messages
PM: sleep: Make suspend of devices more asynchronous
PM: sleep: Suspend async parents after suspending children
PM: sleep: Resume children after resuming the parent
PM: hibernate: Remove size arguments when calling strscpy()
|
|
Merge cpuidle updates for 6.16-rc1:
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in the
menu cpuidle governor (Zhongqiu Han).
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla).
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy).
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant).
* pm-cpuidle:
cpuidle: psci: Avoid initializing faux device if no DT idle states are present
Documentation: ABI: testing: document the new cpuidle sysfs file
Documentation: admin-guide: pm: Document intel_idle C1 demotion
intel_idle: Add C1 demotion on/off sysfs knob
cpuidle: psci: Transition to the faux device interface
cpuidle: menu: Optimize bucket assignment when next_timer_ns equals KTIME_MAX
cpuidle: teo: Fix typos in two comments
|
