| Age | Commit message (Collapse) | Author |
|---|
|
The freeze rwsem is taken by sb_start_intwrite() and dropped during the
commit_ or end_transaction(). In the async case, that happens in a worker
thread. Tell lockdep the calling thread is releasing ownership of the
rwsem and the async thread is picking it up.
XFS plays the same trick in fs/xfs/xfs_aops.c.
Signed-off-by: Sage Weil <sage@inktank.com>
|
|
This patch adds hole punching via fallocate. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
I audited all users of btrfs_drop_extents and found that nobody actually uses
the hint_byte argument. I'm sure it was used for something at some point but
it's not used now, and the way the pinning works the disk bytenr would never be
immediately useful anyway so lets just remove it. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
This is based on Josef's "Btrfs: turbo charge fsync".
If an inode is a BTRFS_INODE_NODATASUM one, we don't need to look for csum
items any more.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
|
|
This is based on Josef's "Btrfs: turbo charge fsync".
The current btrfs checks if an inode is in log by comparing
root's last_log_commit to inode's last_sub_trans[2].
But the problem is that this root->last_log_commit is shared among
inodes.
Say we have N inodes to be logged, after the first inode,
root's last_log_commit is updated and the N-1 remained files will
be skipped.
This fixes the bug by keeping a local copy of root's last_log_commit
inside each inode and this local copy will be maintained itself.
[1]: we regard each log transaction as a subset of btrfs's transaction,
i.e. sub_trans
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
|
|
If we add a new orphan item, we should increase the atomic counter,
not decrease it. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
|
|
This is based on Josef's "Btrfs: turbo charge fsync".
The above Josef's patch performs very good in random sync write test,
because we won't have too much extents to merge.
However, it does not performs good on the test:
dd if=/dev/zero of=foobar bs=4k count=12500 oflag=sync
The reason is when we do sequencial sync write, we need to merge the
current extent just with the previous one, so that we can get accumulated
extents to log:
A(4k) --> AA(8k) --> AAA(12k) --> AAAA(16k) ...
So we'll have to flush more and more checksum into log tree, which is the
bottleneck according to my tests.
But we can avoid this by telling fsync the real extents that are needed
to be logged.
With this, I did the above dd sync write test (size=50m),
w/o (orig) w/ (josef's) w/ (this)
SATA 104KB/s 109KB/s 121KB/s
ramdisk 1.5MB/s 1.5MB/s 10.7MB/s (613%)
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
|
|
We will stop and restart a transaction every time we move to a different leaf
when truncating a file. This is for enospc reasons, but really we could
probably get away with doing this a little better by actually working until we
hit an ENOSPC. So add a ->failfast flag to the block_rsv and set it when we do
truncates which will fail as soon as the block rsv runs out of space, and then
at that point we can stop and restart the transaction and refill the block rsv
and carry on. This will make rm'ing of a file with lots of extents a bit
faster. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
This is based on Josef's "Btrfs: turbo charge fsync".
We should cleanup those extents after we've finished logging inode,
otherwise we may do redundant work on them.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
|
|
I hit this a couple times while working on my fsync patch (all my bugs, not
normal operation), but with my new stuff we could have new errors from cases
I have not encountered, so instead of BUG()'ing we should be WARN()'ing so
that we are notified there is a problem but the user doesn't lose their
data. We can easily commit the transaction in the case that the tree
logging fails and still be fine, so let's try and be as nice to the user as
possible. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
At least for the vm workload. Currently on fsync we will
1) Truncate all items in the log tree for the given inode if they exist
and
2) Copy all items for a given inode into the log
The problem with this is that for things like VMs you can have lots of
extents from the fragmented writing behavior, and worst yet you may have
only modified a few extents, not the entire thing. This patch fixes this
problem by tracking which transid modified our extent, and then when we do
the tree logging we find all of the extents we've modified in our current
transaction, sort them and commit them. We also only truncate up to the
xattrs of the inode and copy that stuff in normally, and then just drop any
extents in the range we have that exist in the log already. Here are some
numbers of a 50 meg fio job that does random writes and fsync()s after every
write
Original Patched
SATA drive 82KB/s 140KB/s
Fusion drive 431KB/s 2532KB/s
So around 2-6 times faster depending on your hardware. There are a few
corner cases, for example if you truncate at all we have to do it the old
way since there is no way to be sure what is in the log is ok. This
probably could be done smarter, but if you write-fsync-truncate-write-fsync
you deserve what you get. All this work is in RAM of course so if your
inode gets evicted from cache and you read it in and fsync it we'll do it
the slow way if we are still in the same transaction that we last modified
the inode in.
The biggest cool part of this is that it requires no changes to the recovery
code, so if you fsync with this patch and crash and load an old kernel, it
will run the recovery and be a-ok. I have tested this pretty thoroughly
with an fsync tester and everything comes back fine, as well as xfstests.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
While working on my fsync patch my fsync tester kept hitting mismatching
md5sums when I would randomly write to a prealloc'ed region, syncfs() and
then write to the prealloced region some more and then fsync() and then
immediately reboot. This is because the tree logging code will skip writing
csums for file extents who's generation is less than the current running
transaction. When we mark extents as written we haven't been updating their
generation so they were always being skipped. This wouldn't happen if you
were to preallocate and then write in the same transaction, but if you for
example prealloced a VM you could definitely run into this problem. This
patch makes my fsync tester happy again. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
Swinging this pendulum back the other way. We've been allocating chunks up
to 2% of the disk no matter how much we actually have allocated. So instead
fix this calculation to only allocate chunks if we have more than 80% of the
space available allocated. Please test this as it will likely cause all
sorts of ENOSPC problems to pop up suddenly. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
There is a completely impossible situation to hit where you can preallocate
a file, fsync it, write into the preallocated region, have the transaction
commit twice and then fsync and then immediately lose power and lose all of
the contents of the write. This patch fixes this just so I feel better
about the situation and because it is lightweight, we just update the
last_trans when we finish an ordered IO and we don't update the inode
itself. This way we are completely safe and I feel better. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
The btrfs send code was assuming the offset of the file item into the
extent translated to bytes on disk. If we're compressed, this isn't
true, and so it was off into extents owned by other files.
It was also improperly handling inline extents. This solves a crash
where we may have gone past the end of the file extent item by not
testing early enough for an inline extent. It also solves problems
where we have a whole between the end of the inline item and the start
of the full extent.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
We can't do the deleted/reused logic for top/root inodes as it would
create a stream that tries to delete and recreate the root dir.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
We have to ignore inode/space cache objects in send/receive.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
We need to pass the root that we determined earlier to iterate_inode_ref.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
Used the wrong compare operator here.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
The previous check was working fine, but this check should be
easier to read. Also, we could theoritically have some exotic
bugs with the previous checks.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
Both were leaked in case of error.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
A leftover from older code and unused now.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
Doing some code cleanups as suggested by Arne.
Changes do not change any logic.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
As the subject already said, add/fix comments.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
Updating send_progress in process_recorded_refs was not correct.
It got updated too early in the cur_inode_new_gen case.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
Btrfs send/receive uses the aux field to store inode numbers. On
32 bit machines this may become a problem.
Also fix all users of ulist_add and ulist_add_merged.
Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
We can't easily use the index of the radix tree for inums as the
radix tree uses 32bit indexes on 32bit kernels. For 32bit kernels,
we now use the lower 32bit of the inum as index and an additional
list to store multiple entries per radix tree entry.
Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
When everything is done, name_cache_free is called which however
forgot to call kfree on the cache entries.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
If we break, we may miss the clone from send_root which we prefer
over all other clones.
Commit is a result of Arne's review.
Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
Don't have a seperate return path for the mentioned case. Now
we do the same "take lowest inode/offset" logic for all found clones.
Commit is a result of Arne's review.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
Make sure to never get in trouble due to the backref_ctx
which was on the stack before.
Commit is a result of Arne's review.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
The new name should be easier to understand/read.
Commit is a result of Arne's review.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
use_list is a leftover and unused.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
We only added the parent for the new position of a moved dir.
We also need to add the old parent of the moved dir.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
fs_path_remove is not used at the moment due to a previous patch.
Remove it for now (with #if 0) to avoid compile warnings.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
We missed that check which resultet in all refs with the same name
being reported as first_ref.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
When the current inodes inum is smaller then the inum of the
parent directory strange things were happending due to wrong
path resolution and other bugs. Fix this with a new approach
for the problem.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
We need rdev in the next commit.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull the trivial tree from Jiri Kosina:
"Tiny usual fixes all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
doc: fix old config name of kprobetrace
fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
btrfs: fix the commment for the action flags in delayed-ref.h
btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
vfs: fix kerneldoc for generic_fh_to_parent()
treewide: fix comment/printk/variable typos
ipr: fix small coding style issues
doc: fix broken utf8 encoding
nfs: comment fix
platform/x86: fix asus_laptop.wled_type module parameter
mfd: printk/comment fixes
doc: getdelays.c: remember to close() socket on error in create_nl_socket()
doc: aliasing-test: close fd on write error
mmc: fix comment typos
dma: fix comments
spi: fix comment/printk typos in spi
Coccinelle: fix typo in memdup_user.cocci
tmiofb: missing NULL pointer checks
tools: perf: Fix typo in tools/perf
tools/testing: fix comment / output typos
...
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Cc: Chris Mason <chris.mason@fusionio.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
The action field has been merged into struct btrfs_delayed_ref_node,
and no struct btrfs_delayed_ref is available now.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
- Pass the user namespace the uid and gid values in the xattr are stored
in into posix_acl_from_xattr.
- Pass the user namespace kuid and kgid values should be converted into
when storing uid and gid values in an xattr in posix_acl_to_xattr.
- Modify all callers of posix_acl_from_xattr and posix_acl_to_xattr to
pass in &init_user_ns.
In the short term this change is not strictly needed but it makes the
code clearer. In the longer term this change is necessary to be able to
mount filesystems outside of the initial user namespace that natively
store posix acls in the linux xattr format.
Cc: Theodore Tso <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull a btrfs revert from Chris Mason:
"My for-linus branch has one revert in the new quota code.
We're building up more fixes at etc for the next merge window, but I'm
keeping them out unless they are bigger regressions or have a huge
impact."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Revert "Btrfs: fix some error codes in btrfs_qgroup_inherit()"
|
|
This reverts commit 5986802c2fcc754040bb7ed95f30bb16c4a843b7.
Both paths are not error paths but regular cases where non-qgroup
subvols are involved.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
It should be storing, not sotring.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Fix typo errors in comments of btrfs_finish_ordered_io.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
