summaryrefslogtreecommitdiff
path: root/fs/ext4
AgeCommit message (Collapse)Author
2018-12-25ext4: fix a potential fiemap/page fault deadlock w/ inline_dataTheodore Ts'o
The ext4_inline_data_fiemap() function calls fiemap_fill_next_extent() while still holding the xattr semaphore. This is not necessary and it triggers a circular lockdep warning. This is because fiemap_fill_next_extent() could trigger a page fault when it writes into page which triggers a page fault. If that page is mmaped from the inline file in question, this could very well result in a deadlock. This problem can be reproduced using generic/519 with a file system configuration which has the inline_data feature enabled. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2018-12-24ext4: make sure enough credits are reserved for dioread_nolock writesTheodore Ts'o
There are enough credits reserved for most dioread_nolock writes; however, if the extent tree is sufficiently deep, and/or quota is enabled, the code was not allowing for all eventualities when reserving journal credits for the unwritten extent conversion. This problem can be seen using xfstests ext4/034: WARNING: CPU: 1 PID: 257 at fs/ext4/ext4_jbd2.c:271 __ext4_handle_dirty_metadata+0x10c/0x180 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work RIP: 0010:__ext4_handle_dirty_metadata+0x10c/0x180 ... EXT4-fs: ext4_free_blocks:4938: aborting transaction: error 28 in __ext4_handle_dirty_metadata EXT4: jbd2_journal_dirty_metadata failed: handle type 11 started at line 4921, credits 4/0, errcode -28 EXT4-fs error (device dm-1) in ext4_free_blocks:4950: error 28 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2018-12-19ext4: check for shutdown and r/o file system in ext4_write_inode()Theodore Ts'o
If the file system has been shut down or is read-only, then ext4_write_inode() needs to bail out early. Also use jbd2_complete_transaction() instead of ext4_force_commit() so we only force a commit if it is needed. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2018-12-19ext4: force inode writes when nfsd calls commit_metadata()Theodore Ts'o
Some time back, nfsd switched from calling vfs_fsync() to using a new commit_metadata() hook in export_operations(). If the file system did not provide a commit_metadata() hook, it fell back to using sync_inode_metadata(). Unfortunately doesn't work on all file systems. In particular, it doesn't work on ext4 due to how the inode gets journalled --- the VFS writeback code will not always call ext4_write_inode(). So we need to provide our own ext4_nfs_commit_metdata() method which calls ext4_write_inode() directly. Google-Bug-Id: 121195940 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2018-12-19ext4: avoid declaring fs inconsistent due to invalid file handlesTheodore Ts'o
If we receive a file handle, either from NFS or open_by_handle_at(2), and it points at an inode which has not been initialized, and the file system has metadata checksums enabled, we shouldn't try to get the inode, discover the checksum is invalid, and then declare the file system as being inconsistent. This can be reproduced by creating a test file system via "mke2fs -t ext4 -O metadata_csum /tmp/foo.img 8M", mounting it, cd'ing into that directory, and then running the following program. #define _GNU_SOURCE #include <fcntl.h> struct handle { struct file_handle fh; unsigned char fid[MAX_HANDLE_SZ]; }; int main(int argc, char **argv) { struct handle h = {{8, 1 }, { 12, }}; open_by_handle_at(AT_FDCWD, &h.fh, O_RDONLY); return 0; } Google-Bug-Id: 120690101 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2018-12-19ext4: include terminating u32 in size of xattr entries when expanding inodesTheodore Ts'o
In ext4_expand_extra_isize_ea(), we calculate the total size of the xattr header, plus the xattr entries so we know how much of the beginning part of the xattrs to move when expanding the inode extra size. We need to include the terminating u32 at the end of the xattr entries, or else if there is uninitialized, non-zero bytes after the xattr entries and before the xattr values, the list of xattr entries won't be properly terminated. Reported-by: Steve Graham <stgraham2000@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2018-12-10ext4: compare old and new mode before setting update_mode flagChengguang Xu
If new mode is the same as old mode we don't have to reset inode mode in the rest of the code, so compare old and new mode before setting update_mode flag. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-12-07blkcg: associate writeback bios with a blkgDennis Zhou
One of the goals of this series is to remove a separate reference to the css of the bio. This can and should be accessed via bio_blkcg(). In this patch, wbc_init_bio() now requires a bio to have a device associated with it. Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04ext4: fix EXT4_IOC_GROUP_ADD ioctlruippan (潘睿)
Commit e2b911c53584 ("ext4: clean up feature test macros with predicate functions") broke the EXT4_IOC_GROUP_ADD ioctl. This was not noticed since only very old versions of resize2fs (before e2fsprogs 1.42) use this ioctl. However, using a new kernel with an enterprise Linux userspace will cause attempts to use online resize to fail with "No reserved GDT blocks". Fixes: e2b911c53584 ("ext4: clean up feature test macros with predicate...") Cc: stable@kernel.org # v4.4 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: ruippan (潘睿) <ruippan@tencent.com>
2018-12-04ext4: hard fail dax mount on unsupported devicesEric Sandeen
As dax inches closer to production use, an administrator should not be surprised by silently disabling the feature they asked for. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-12-04ext4: remove redundant condition checkChengguang Xu
ext4_xattr_destroy_cache() can handle NULL pointer correctly, so there is no need to check NULL pointer before calling ext4_xattr_destroy_cache(). Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-12-04ext4: clean up indentation issues, remove extraneous tabsColin Ian King
There are several lines that are indented too far, clean these up by removing the tabs. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-12-04ext4: missing unlock/put_page() in ext4_try_to_write_inline_data()Maurizio Lombardi
In case of error, ext4_try_to_write_inline_data() should unlock and release the page it holds. Fixes: f19d5870cbf7 ("ext4: add normal write support for inline data") Cc: stable@kernel.org # 3.8 Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-12-03ext4: fix possible use after free in ext4_quota_enablePan Bian
The function frees qf_inode via iput but then pass qf_inode to lockdep_set_quota_inode on the failure path. This may result in a use-after-free bug. The patch frees df_inode only when it is never used. Fixes: daf647d2dd5 ("ext4: add lockdep annotations for i_data_sem") Cc: stable@kernel.org # 4.6 Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-11-25ext4: add ext4_sb_bread() to disambiguate ENOMEM casesTheodore Ts'o
Today, when sb_bread() returns NULL, this can either be because of an I/O error or because the system failed to allocate the buffer. Since it's an old interface, changing would require changing many call sites. So instead we create our own ext4_sb_bread(), which also allows us to set the REQ_META flag. Also fixed a problem in the xattr code where a NULL return in a function could also mean that the xattr was not found, which could lead to the wrong error getting returned to userspace. Fixes: ac27a0ec112a ("ext4: initial copy of files from ext3") Cc: stable@kernel.org # 2.6.19 Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-11-11Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "A large number of ext4 bug fixes, mostly buffer and memory leaks on error return cleanup paths" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: missing !bh check in ext4_xattr_inode_write() ext4: fix buffer leak in __ext4_read_dirblock() on error path ext4: fix buffer leak in ext4_expand_extra_isize_ea() on error path ext4: fix buffer leak in ext4_xattr_move_to_block() on error path ext4: release bs.bh before re-using in ext4_xattr_block_find() ext4: fix buffer leak in ext4_xattr_get_block() on error path ext4: fix possible leak of s_journal_flag_rwsem in error path ext4: fix possible leak of sbi->s_group_desc_leak in error path ext4: remove unneeded brelse call in ext4_xattr_inode_update_ref() ext4: avoid possible double brelse() in add_new_gdb() on error path ext4: avoid buffer leak in ext4_orphan_add() after prior errors ext4: avoid buffer leak on shutdown in ext4_mark_iloc_dirty() ext4: fix possible inode leak in the retry loop of ext4_resize_fs() ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizing ext4: add missing brelse() update_backups()'s error path ext4: add missing brelse() add_new_gdb_meta_bg()'s error path ext4: add missing brelse() in set_flexbg_block_bitmap()'s error path ext4: avoid potential extra brelse in setup_new_flex_group_blocks()
2018-11-09ext4: missing !bh check in ext4_xattr_inode_write()Vasily Averin
According to Ted Ts'o ext4_getblk() called in ext4_xattr_inode_write() should not return bh = NULL The only time that bh could be NULL, then, would be in the case of something really going wrong; a programming error elsewhere (perhaps a wild pointer dereference) or I/O error causing on-disk file system corruption (although that would be highly unlikely given that we had *just* allocated the blocks and so the metadata blocks in question probably would still be in the cache). Fixes: e50e5129f384 ("ext4: xattr-in-inode support") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.13
2018-11-07ext4: fix buffer leak in __ext4_read_dirblock() on error pathVasily Averin
Fixes: dc6982ff4db1 ("ext4: refactor code to read directory blocks ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.9
2018-11-07ext4: fix buffer leak in ext4_expand_extra_isize_ea() on error pathVasily Averin
Fixes: de05ca852679 ("ext4: move call to ext4_error() into ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.17
2018-11-07ext4: fix buffer leak in ext4_xattr_move_to_block() on error pathVasily Averin
Fixes: 3f2571c1f91f ("ext4: factor out xattr moving") Fixes: 6dd4ee7cab7e ("ext4: Expand extra_inodes space per ...") Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.23
2018-11-07ext4: release bs.bh before re-using in ext4_xattr_block_find()Vasily Averin
bs.bh was taken in previous ext4_xattr_block_find() call, it should be released before re-using Fixes: 7e01c8e5420b ("ext3/4: fix uninitialized bs in ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.26
2018-11-07ext4: fix buffer leak in ext4_xattr_get_block() on error pathVasily Averin
Fixes: dec214d00e0d ("ext4: xattr inode deduplication") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.13
2018-11-07ext4: fix possible leak of s_journal_flag_rwsem in error pathVasily Averin
Fixes: c8585c6fcaf2 ("ext4: fix races between changing inode journal ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.7
2018-11-07ext4: fix possible leak of sbi->s_group_desc_leak in error pathTheodore Ts'o
Fixes: bfe0a5f47ada ("ext4: add more mount time checks of the superblock") Reported-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.18
2018-11-06ext4: remove unneeded brelse call in ext4_xattr_inode_update_ref()Vasily Averin
Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-11-06ext4: avoid possible double brelse() in add_new_gdb() on error pathTheodore Ts'o
Fixes: b40971426a83 ("ext4: add error checking to calls to ...") Reported-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.38
2018-11-06ext4: avoid buffer leak in ext4_orphan_add() after prior errorsVasily Averin
Fixes: d745a8c20c1f ("ext4: reduce contention on s_orphan_lock") Fixes: 6e3617e579e0 ("ext4: Handle non empty on-disk orphan link") Cc: Dmitry Monakhov <dmonakhov@gmail.com> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.34
2018-11-06ext4: avoid buffer leak on shutdown in ext4_mark_iloc_dirty()Vasily Averin
ext4_mark_iloc_dirty() callers expect that it releases iloc->bh even if it returns an error. Fixes: 0db1ff222d40 ("ext4: add shutdown bit and check for it") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.11
2018-11-06ext4: fix possible inode leak in the retry loop of ext4_resize_fs()Vasily Averin
Fixes: 1c6bd7173d66 ("ext4: convert file system to meta_bg if needed ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.7
2018-11-06ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizingVasily Averin
Fixes: 117fff10d7f1 ("ext4: grow the s_flex_groups array as needed ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.7
2018-11-03ext4: add missing brelse() update_backups()'s error pathVasily Averin
Fixes: ac27a0ec112a ("ext4: initial copy of files from ext3") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.19
2018-11-03ext4: add missing brelse() add_new_gdb_meta_bg()'s error pathVasily Averin
Fixes: 01f795f9e0d6 ("ext4: add online resizing support for meta_bg ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.7
2018-11-03ext4: add missing brelse() in set_flexbg_block_bitmap()'s error pathVasily Averin
Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...") Cc: stable@kernel.org # 3.3 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-11-03ext4: avoid potential extra brelse in setup_new_flex_group_blocks() Vasily Averin
Currently bh is set to NULL only during first iteration of for cycle, then this pointer is not cleared after end of using. Therefore rollback after errors can lead to extra brelse(bh) call, decrements bh counter and later trigger an unexpected warning in __brelse() Patch moves brelse() calls in body of cycle to exclude requirement of brelse() call in rollback. Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.3+
2018-11-02Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fixes from Jens Axboe: "The biggest part of this pull request is the revert of the blkcg cleanup series. It had one fix earlier for a stacked device issue, but another one was reported. Rather than play whack-a-mole with this, revert the entire series and try again for the next kernel release. Apart from that, only small fixes/changes. Summary: - Indentation fixup for mtip32xx (Colin Ian King) - The blkcg cleanup series revert (Dennis Zhou) - Two NVMe fixes. One fixing a regression in the nvme request initialization in this merge window, causing nvme-fc to not work. The other is a suspend/resume p2p resource issue (James, Keith) - Fix sg discard merge, allowing us to merge in cases where we didn't before (Jianchao Wang) - Call rq_qos_exit() after the queue is frozen, preventing a hang (Ming) - Fix brd queue setup, fixing an oops if we fail setting up all devices (Ming)" * tag 'for-linus-20181102' of git://git.kernel.dk/linux-block: nvme-pci: fix conflicting p2p resource adds nvme-fc: fix request private initialization blkcg: revert blkcg cleanups series block: brd: associate with queue until adding disk block: call rq_qos_exit() after queue is frozen mtip32xx: clean an indentation issue, remove extraneous tabs block: fix the DISCARD request merge
2018-11-01Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "No common topic, really - a handful of assorted stuff; the least trivial bits are Mark's dedupe patches" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/exofs: only use true/false for asignment of bool type variable fs/exofs: fix potential memory leak in mount option parsing Delete invalid assignment statements in do_sendfile iomap: remove duplicated include from iomap.c vfs: dedupe should return EPERM if permission is not granted vfs: allow dedupe of user owned read-only files ntfs: don't open-code ERR_CAST ext4: don't open-code ERR_CAST
2018-11-01blkcg: revert blkcg cleanups seriesDennis Zhou
This reverts a series committed earlier due to null pointer exception bug report in [1]. It seems there are edge case interactions that I did not consider and will need some time to understand what causes the adverse interactions. The original series can be found in [2] with a follow up series in [3]. [1] https://www.spinics.net/lists/cgroups/msg20719.html [2] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/ [3] https://lore.kernel.org/lkml/20181020185612.51587-1-dennis@kernel.org/ This reverts the following commits: d459d853c2ed, b2c3fa546705, 101246ec02b5, b3b9f24f5fcc, e2b0989954ae, f0fcb3ec89f3, c839e7a03f92, bdc2491708c4, 74b7c02a9bc1, 5bf9a1f3b4ef, a7b39b4e961c, 07b05bcc3213, 49f4c2dc2b50, 27e6fa996c53 Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-01Merge tag 'compiler-attributes-for-linus-4.20-rc1' of ↵Linus Torvalds
https://github.com/ojeda/linux Pull compiler attribute updates from Miguel Ojeda: "This is an effort to disentangle the include/linux/compiler*.h headers and bring them up to date. The main idea behind the series is to use feature checking macros (i.e. __has_attribute) instead of compiler version checks (e.g. GCC_VERSION), which are compiler-agnostic (so they can be shared, reducing the size of compiler-specific headers) and version-agnostic. Other related improvements have been performed in the headers as well, which on top of the use of __has_attribute it has amounted to a significant simplification of these headers (e.g. GCC_VERSION is now only guarding a few non-attribute macros). This series should also help the efforts to support compiling the kernel with clang and icc. A fair amount of documentation and comments have also been added, clarified or removed; and the headers are now more readable, which should help kernel developers in general. The series was triggered due to the move to gcc >= 4.6. In turn, this series has also triggered Sparse to gain the ability to recognize __has_attribute on its own. Finally, the __nonstring variable attribute series has been also applied on top; plus two related patches from Nick Desaulniers for unreachable() that came a bit afterwards" * tag 'compiler-attributes-for-linus-4.20-rc1' of https://github.com/ojeda/linux: compiler-gcc: remove comment about gcc 4.5 from unreachable() compiler.h: update definition of unreachable() Compiler Attributes: ext4: remove local __nonstring definition Compiler Attributes: auxdisplay: panel: use __nonstring Compiler Attributes: enable -Wstringop-truncation on W=1 (gcc >= 8) Compiler Attributes: add support for __nonstring (gcc >= 8) Compiler Attributes: add MAINTAINERS entry Compiler Attributes: add Doc/process/programming-language.rst Compiler Attributes: remove uses of __attribute__ from compiler.h Compiler Attributes: KENTRY used twice the "used" attribute Compiler Attributes: use feature checks instead of version checks Compiler Attributes: add missing SPDX ID in compiler_types.h Compiler Attributes: remove unneeded sparse (__CHECKER__) tests Compiler Attributes: homogenize __must_be_array Compiler Attributes: remove unneeded tests Compiler Attributes: always use the extra-underscores syntax Compiler Attributes: remove unused attributes
2018-10-28Merge branch 'xarray' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds
Pull XArray conversion from Matthew Wilcox: "The XArray provides an improved interface to the radix tree data structure, providing locking as part of the API, specifying GFP flags at allocation time, eliminating preloading, less re-walking the tree, more efficient iterations and not exposing RCU-protected pointers to its users. This patch set 1. Introduces the XArray implementation 2. Converts the pagecache to use it 3. Converts memremap to use it The page cache is the most complex and important user of the radix tree, so converting it was most important. Converting the memremap code removes the only other user of the multiorder code, which allows us to remove the radix tree code that supported it. I have 40+ followup patches to convert many other users of the radix tree over to the XArray, but I'd like to get this part in first. The other conversions haven't been in linux-next and aren't suitable for applying yet, but you can see them in the xarray-conv branch if you're interested" * 'xarray' of git://git.infradead.org/users/willy/linux-dax: (90 commits) radix tree: Remove multiorder support radix tree test: Convert multiorder tests to XArray radix tree tests: Convert item_delete_rcu to XArray radix tree tests: Convert item_kill_tree to XArray radix tree tests: Move item_insert_order radix tree test suite: Remove multiorder benchmarking radix tree test suite: Remove __item_insert memremap: Convert to XArray xarray: Add range store functionality xarray: Move multiorder_check to in-kernel tests xarray: Move multiorder_shrink to kernel tests xarray: Move multiorder account test in-kernel radix tree test suite: Convert iteration test to XArray radix tree test suite: Convert tag_tagged_items to XArray radix tree: Remove radix_tree_clear_tags radix tree: Remove radix_tree_maybe_preload_order radix tree: Remove split/join code radix tree: Remove radix_tree_update_node_t page cache: Finish XArray conversion dax: Convert page fault handlers to XArray ...
2018-10-24Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: - further restructure ext4 documentation - fix up ext4's delayed allocation for bigalloc file systems - fix up some syzbot-detected races in EXT4_IOC_MOVE_EXT, EXT4_IOC_SWAP_BOOT, and ext4_remount - ... and a few other miscellaneous bugs and optimizations. * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits) ext4: fix use-after-free race in ext4_remount()'s error path ext4: cache NULL when both default_acl and acl are NULL docs: promote the ext4 data structures book to top level docs: move ext4 administrative docs to admin-guide/ jbd2: fix use after free in jbd2_log_do_checkpoint() ext4: propagate error from dquot_initialize() in EXT4_IOC_FSSETXATTR ext4: fix setattr project check in fssetxattr ioctl docs: make ext4 readme tables readable docs: fix ext4 documentation table formatting problems docs: generate a separate ext4 pdf file from the documentation ext4: convert fault handler to use vm_fault_t type ext4: initialize retries variable in ext4_da_write_inline_data_begin() ext4: fix EXT4_IOC_SWAP_BOOT ext4: fix build error when DX_DEBUG is defined ext4: fix argument checking in EXT4_IOC_MOVE_EXT ext4: fix reserved cluster accounting at page invalidation time ext4: adjust reserved cluster count when removing extents ext4: reduce reserved cluster count by number of allocated clusters ext4: fix reserved cluster accounting at delayed write time ext4: add new pending reservation mechanism ...
2018-10-21pagevec: Use xa_mark_tMatthew Wilcox
Removes sparse warnings. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-10-12ext4: fix use-after-free race in ext4_remount()'s error pathTheodore Ts'o
It's possible for ext4_show_quota_options() to try reading s_qf_names[i] while it is being modified by ext4_remount() --- most notably, in ext4_remount's error path when the original values of the quota file name gets restored. Reported-by: syzbot+a2872d6feea6918008a9@syzkaller.appspotmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.2+
2018-10-10ext4: don't open-code ERR_CASTAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-06ext4: cache NULL when both default_acl and acl are NULLChengguang Xu
default_acl and acl of newly created inode will be initiated as ACL_NOT_CACHED in vfs function inode_init_always() and later will be updated by calling xxx_init_acl() in specific filesystems. However, when default_acl and acl are NULL then they keep the value of ACL_NOT_CACHED. This patch changes the code to cache NULL for acl / default_acl in this case to save unnecessary ACL lookup attempt. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2018-10-03ext4: propagate error from dquot_initialize() in EXT4_IOC_FSSETXATTRWang Shilong
We return most failure of dquota_initialize() except inode evict, this could make a bit sense, for example we allow file removal even quota files are broken? But it dosen't make sense to allow setting project if quota files etc are broken. Signed-off-by: Wang Shilong <wshilong@ddn.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2018-10-03ext4: fix setattr project check in fssetxattr ioctlWang Shilong
Currently, project quota could be changed by fssetxattr ioctl, and existed permission check inode_owner_or_capable() is obviously not enough, just think that common users could change project id of file, that could make users to break project quota easily. This patch try to follow same regular of xfs project quota: "Project Quota ID state is only allowed to change from within the init namespace. Enforce that restriction only if we are trying to change the quota ID state. Everything else is allowed in user namespaces." Besides that, check and set project id'state should be an atomic operation, protect whole operation with inode lock, ext4_ioctl_setproject() is only used for ioctl EXT4_IOC_FSSETXATTR, we have held mnt_want_write_file() before ext4_ioctl_setflags(), and ext4_ioctl_setproject() is called after ext4_ioctl_setflags(), we could share codes, so remove it inside ext4_ioctl_setproject(). Signed-off-by: Wang Shilong <wshilong@ddn.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Cc: stable@kernel.org
2018-10-02ext4: convert fault handler to use vm_fault_t typeSouptick Joarder
Return type of ext4_page_mkwrite and ext4_filemap_fault are changed to use vm_fault_t type. With this patch all the callers of block_page_mkwrite_return() are changed to handle vm_fault_t. So converting the return type of block_page_mkwrite_return() to vm_fault_t. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Matthew Wilcox <willy@infradead.org>
2018-10-02ext4: initialize retries variable in ext4_da_write_inline_data_begin()Lukas Czerner
Variable retries is not initialized in ext4_da_write_inline_data_begin() which can lead to nondeterministic number of retries in case we hit ENOSPC. Initialize retries to zero as we do everywhere else. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Fixes: bc0ca9df3b2a ("ext4: retry allocation when inline->extent conversion failed") Cc: stable@kernel.org
2018-10-02ext4: fix EXT4_IOC_SWAP_BOOTTheodore Ts'o
The code EXT4_IOC_SWAP_BOOT ioctl hasn't been updated in a while, and it's a bit broken with respect to more modern ext4 kernels, especially metadata checksums. Other problems fixed with this commit: * Don't allow installing a DAX, swap file, or an encrypted file as a boot loader. * Respect the immutable and append-only flags. * Wait until any DIO operations are finished *before* calling truncate_inode_pages(). * Don't swap inode->i_flags, since these flags have nothing to do with the inode blocks --- and it will give the IMA/audit code heartburn when the inode is evicted. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Reported-by: syzbot+e81ccd4744c6c4f71354@syzkaller.appspotmail.com
2018-10-02ext4: fix build error when DX_DEBUG is definedGabriel Krisman Bertazi
Enabling DX_DEBUG triggers the build error below. info is an attribute of the dxroot structure. linux/fs/ext4/namei.c:2264:12: error: ‘info’ undeclared (first use in this function); did you mean ‘insl’? info->indirect_levels)); Fixes: e08ac99fa2a2 ("ext4: add largedir feature") Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Lukas Czerner <lczerner@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-14 14:57:33 +0000