| Age | Commit message (Collapse) | Author |
|---|
|
Use list_for_each_entry_safe() instead of list_for_each_safe() to
simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use list_for_each_entry*() instead of list_for_each*() to simplify
the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We use many constants to represent size and offset value. And to make
code readable we use '256 * 1024 * 1024' instead of '268435456' to
represent '256MB'. However we can make far more readable with 'SZ_256MB'
which is defined in the 'linux/sizes.h'.
So this patch replaces 'xxx * 1024 * 1024' kind of expression with
single 'SZ_xxxMB' if 'xxx' is a power of 2 then 'xxx * SZ_1M' if 'xxx' is
not a power of 2. And I haven't touched to '4096' & '8192' because it's
more intuitive than 'SZ_4KB' & 'SZ_8KB'.
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's slightly cleaner to zero-out the delayed node upon allocation
than to do it by hand in btrfs_init_delayed_node() for a few members
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Conform to __btrfs_fs_incompat() cast-to-bool (!!) by explicitly
returning boolean not int.
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The inode argument is never used from the beginning, so remove it.
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Although we prefer to use separate caches for various structs, it seems
better not to do that for struct btrfs_delalloc_work. Objects of this
type are allocated rarely, when transaction commit calls
btrfs_start_delalloc_roots, requesting delayed iputs.
The objects are temporary (with some IO involved) but still allocated
and freed within __start_delalloc_inodes. Memory allocation failure is
handled.
The slab cache is empty most of the time (observed on several systems),
so if we need to allocate a new slab object, the first one has to
allocate a full page. In a potential case of low memory conditions this
might fail with higher probability compared to using the generic slab
caches.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The helper btrfs_alloc_workqueue will add the "btrfs-" prefix.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can handle the special case of num_stripes == 0 directly inside
btrfs_read_sys_array. The BUG_ON in btrfs_chunk_item_size is there to
catch other unhandled cases where we fail to validate external data.
A crafted or corrupted image crashes at mount time:
BTRFS: device fsid 9006933e-2a9a-44f0-917f-514252aeec2c devid 1 transid 7 /dev/loop0
BTRFS info (device loop0): disk space caching is enabled
BUG: failure at fs/btrfs/ctree.h:337/btrfs_chunk_item_size()!
Kernel panic - not syncing: BUG!
CPU: 0 PID: 313 Comm: mount Not tainted 4.2.5-00657-ge047887-dirty #25
Stack:
637af890 60062489 602aeb2e 604192ba
60387961 00000011 637af8a0 6038a835
637af9c0 6038776b 634ef32b 00000000
Call Trace:
[<6001c86d>] show_stack+0xfe/0x15b
[<6038a835>] dump_stack+0x2a/0x2c
[<6038776b>] panic+0x13e/0x2b3
[<6020f099>] btrfs_read_sys_array+0x25d/0x2ff
[<601cfbbe>] open_ctree+0x192d/0x27af
[<6019c2c1>] btrfs_mount+0x8f5/0xb9a
[<600bc9a7>] mount_fs+0x11/0xf3
[<600d5167>] vfs_kern_mount+0x75/0x11a
[<6019bcb0>] btrfs_mount+0x2e4/0xb9a
[<600bc9a7>] mount_fs+0x11/0xf3
[<600d5167>] vfs_kern_mount+0x75/0x11a
[<600d710b>] do_mount+0xa35/0xbc9
[<600d7557>] SyS_mount+0x95/0xc8
[<6001e884>] handle_syscall+0x6b/0x8e
Reported-by: Jiri Slaby <jslaby@suse.com>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
CC: stable@vger.kernel.org # 3.19+
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_delayed_extent_op can be packed in a better way, it's 40 bytes now
and has 8 unused bytes. Reducing the level type to u8 makes it possible
to squeeze it to the padding byte after key. The bitfields were switched
to bool as there's space to store the full byte without increasing the
whole structure, besides that the generated assembly is smaller.
struct btrfs_delayed_extent_op {
struct btrfs_disk_key key; /* 0 17 */
u8 level; /* 17 1 */
bool update_key; /* 18 1 */
bool update_flags; /* 19 1 */
bool is_data; /* 20 1 */
/* XXX 3 bytes hole, try to pack */
u64 flags_to_set; /* 24 8 */
/* size: 32, cachelines: 1, members: 6 */
/* sum members: 29, holes: 1, sum holes: 3 */
/* last cacheline: 32 bytes */
};
The final size is 32 bytes which gives +26 object per slab page.
text data bss dec hex filename
938811 43670 23144 1005625 f5839 fs/btrfs/btrfs.ko.before
938747 43670 23144 1005561 f57f9 fs/btrfs/btrfs.ko.after
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Inodes for delayed iput allocate a trivial helper structure, let's place
the list hook directly into the inode and save a kmalloc (killing a
__GFP_NOFAIL as a bonus) at the cost of increasing size of btrfs_inode.
The inode can be put into the delayed_iputs list more than once and we
have to keep the count. This means we can't use the list_splice to
process a bunch of inodes because we'd lost track of the count if the
inode is put into the delayed iputs again while it's processed.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we will add support for -d dup for non-mixed filesystem,
kernel need to support converting to this raid-type.
This patch remove limitation of above case.
Tested by following script:
(combination of dup conversion with fsck):
export TEST_DEV='/dev/vdc'
export TEST_DIR='/var/ltf/tester/mnt'
do_dup_test()
{
local m_from="$1"
local d_from="$2"
local m_to="$3"
local d_to="$4"
echo "Convert from -m $m_from -d $d_from to -m $m_to -d $d_to"
umount "$TEST_DIR" &>/dev/null
./mkfs.btrfs -f -m "$m_from" -d "$d_from" "$TEST_DEV" >/dev/null || return 1
mount "$TEST_DEV" "$TEST_DIR" || return 1
cp -a /sbin/* "$TEST_DIR"
[[ "$m_from" != "$m_to" ]] && {
./btrfs balance start -f -mconvert="$m_to" "$TEST_DIR" || return 1
}
[[ "$d_from" != "$d_to" ]] && {
local opt=()
[[ "$d_to" == single ]] && opt+=("-f")
./btrfs balance start "${opt[@]}" -dconvert="$d_to" "$TEST_DIR" || return 1
}
umount "$TEST_DIR" || return 1
./btrfsck "$TEST_DEV" || return 1
echo
return 0
}
test_all()
{
for m_from in single dup; do
for d_from in single dup; do
for m_to in single dup; do
for d_to in single dup; do
do_dup_test "$m_from" "$d_from" "$m_to" "$d_to" || return 1
done
done
done
done
}
test_all
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We hit this panic on a few of our boxes this week where we have an
ordered_extent with an NULL inode. We do an igrab() of the inode in writepages,
but weren't doing it in writepage which can be called directly from the VM on
dirty pages. If the inode has been unlinked then we could have I_FREEING set
which means igrab() would return NULL and we get this panic. Fix this by trying
to igrab in btrfs_writepage, and if it returns NULL then just redirty the page
and return AOP_WRITEPAGE_ACTIVATE; so the VM knows it wasn't successful. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Looks like oversight, call brelse() when checksum fails. Further down the
code, in the non error path, we do call brelse() and so we don't see
brelse() in the goto error paths.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
make sure the isize we read doesn't change during the process.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Original issue is fixed by:
f2fs: cover more area with nat_tree_lock
This reverts commit 24928634f81b1592e83b37dcd89ed45c28f12feb.
|
|
There was a subtle bug on nat cache management which incurs wrong nid allocation
or wrong block addresses when try_to_free_nats is triggered heavily.
This patch enlarges the previous coverage of nat_tree_lock to avoid data race.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Use to_delayed_work() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
If we failed to create a hard link we were not always releasing the
the transaction handle we got before, resulting in a memory leak and
preventing any other tasks from being able to commit the current
transaction.
Fix this by always releasing our transaction handle.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
|
|
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
gendisk with part==0 is obviously gendisk->disk_name.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Number of fds is already known based on passed list.
No functional changes.
Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
|
|
|
|
XFS now uses CRC verification over a limited section of the log to
detect torn writes prior to a crash. This is difficult to test directly
due to the timing and hardware requirements to cause a short write.
Add a mechanism to inject CRC errors into log records to facilitate
testing torn write detection during log recovery. This mechanism is
dangerous and can result in filesystem corruption. Thus, it is only
available in DEBUG mode for testing/development purposes. Set a non-zero
value to the following sysfs entry to enable error injection:
/sys/fs/xfs/<dev>/log/log_badcrc_factor
Once enabled, XFS intentionally writes an invalid CRC to a log record at
some random point in the future based on the provided frequency. The
filesystem immediately shuts down once the record has been written to
the physical log to prevent metadata writeback (e.g., AIL insertion)
once the log write completes. This helps reasonably simulate a torn
write to the log as the affected record must be safe to discard. The
next mount after the intentional shutdown requires log recovery and
should detect and recover from the torn write.
Note again that this _will_ result in data loss or worse. For testing
and development purposes only!
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Certain types of storage, such as persistent memory, do not provide
sector atomicity for writes. This means that if a crash occurs while XFS
is writing log records, only part of those records might make it to the
storage. This is problematic because log recovery uses the cycle value
packed at the top of each log block to locate the head/tail of the log.
This can lead to CRC verification failures during log recovery and an
unmountable fs for a filesystem that is otherwise consistent.
Update log recovery to incorporate log record CRC verification as part
of the head/tail discovery process. Once the head is located via the
traditional algorithm, run a CRC-only pass over the records up to the
head of the log. If CRC verification fails, assume that the records are
torn as a matter of policy and trim the head block back to the start of
the first bad record.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
* pnfs_generic:
NFSv4.1/pNFS: Cleanup constify struct pnfs_layout_range arguments
NFSv4.1/pnfs: Cleanup copying of pnfs_layout_range structures
NFSv4.1/pNFS: Cleanup pnfs_mark_matching_lsegs_invalid()
NFSv4.1/pNFS: Fix a race in initiate_file_draining()
NFSv4.1/pNFS: pnfs_error_mark_layout_for_return() must always return layout
NFSv4.1/pNFS: pnfs_mark_matching_lsegs_return() should set the iomode
NFSv4.1/pNFS: Use nfs4_stateid_copy for copying stateids
NFSv4.1/pNFS: Don't pass stateids by value to pnfs_send_layoutreturn()
NFS: Relax requirements in nfs_flush_incompatible
NFSv4.1/pNFS: Don't queue up a new commit if the layout segment is invalid
NFS: Allow multiple commit requests in flight per file
NFS/pNFS: Fix up pNFS write reschedule layering violations and bugs
NFSv4: List stateid information in the callback tracepoints
NFSv4.1/pNFS: Don't return NFS4ERR_DELAY unnecessarily in CB_LAYOUTRECALL
NFSv4.1/pNFS: Ensure we enforce RFC5661 Section 12.5.5.2.1
pNFS: If we have to delay the layout callback, mark the layout for return
NFSv4.1/pNFS: Add a helper to mark the layout as returned
pNFS: Ensure nfs4_layoutget_prepare returns the correct error
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Make it more obvious what we're returning...
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Peng Tao points out that the call to pnfs_mark_matching_lsegs_return()
could race with pnfs_put_lseg(), in which case the layout segment is
cleared, but no layoutreturn will be sent.
Fix is to replace the call to pnfs_mark_matching_lsegs_invalid().
Reported-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Fix a bug whereby if all the layout segments could be immediately freed,
the call to pnfs_error_mark_layout_for_return() would never result in
a layoutreturn.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If pnfs_mark_matching_lsegs_return() needs to mark a layout segment for
return, then it must also set the return iomode.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
A stateid is a structure, pass it as a pointer.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
... rather than play with __get_free_pages() (and figuring out the
allocation order, etc.)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
get_zeroed_page does alloc_page and returns page_address of the result;
subsequent virt_to_page will recover the page, but since the caller
needs both page and its page_address() anyway, why bother going through
that wrapper at all?
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
let it just return NULL, pointer to kernel copy or ERR_PTR().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
A _lot_ of ->write() instances were open-coding it; some are
converted to memdup_user_nul(), a lot more remain...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
|
|
If a name contains at least some characters with Unicode values
exceeding single byte, the CS0 output should have 2 bytes per character.
And if other input characters have single byte Unicode values, then
the single input byte is converted to 2 output bytes, and the length
of output becomes larger than the length of input. And if the input
name is long enough, the output length may exceed the allocated buffer
length.
All this means that conversion from UTF8 or NLS to CS0 requires
checking of output length in order to stop when it exceeds the given
output buffer size.
[JK: Make code return -ENAMETOOLONG instead of silently truncating the
name]
CC: stable@vger.kernel.org
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
udf_CS0toUTF8 function stops the conversion when the output buffer
length reaches UDF_NAME_LEN-2, which is correct maximum name length,
but, when checking, it leaves the space for a single byte only,
while multi-bytes output characters can take more space, causing
buffer overflow.
Similar error exists in udf_CS0toNLS function, that restricts
the output length to UDF_NAME_LEN, while actual maximum allowed
length is UDF_NAME_LEN-2.
In these cases the output can override not only the current buffer
length field, causing corruption of the name buffer itself, but also
following allocation structures, causing kernel crash.
Adjust the output length checks in both functions to prevent buffer
overruns in case of multi-bytes UTF8 or NLS characters.
CC: stable@vger.kernel.org
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
ConfigFS lacked binary attributes up until now. This patch
introduces support for binary attributes in a somewhat similar
manner of sysfs binary attributes albeit with changes that
fit the configfs usage model.
Problems that configfs binary attributes fix are everything that
requires a binary blob as part of the configuration of a resource,
such as bitstream loading for FPGAs, DTBs for dynamically created
devices etc.
Look at Documentation/filesystems/configfs/configfs.txt for internals
and howto use them.
This patch is against linux-next as of today that contains
Christoph's configfs rework.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[hch: folded a fix from Geert Uytterhoeven <geert+renesas@glider.be>]
[hch: a few tiny updates based on review feedback]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The qtree_fmt_operations structures are never modified, so declare them as
const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jan Kara <jack@suse.cz>
|
