| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt::
"Eventfs fixes:
- With the usage of simple_recursive_remove() recommended by Al Viro,
the code should not be calling "d_invalidate()" itself. Doing so is
causing crashes. The code was calling d_invalidate() on the race of
trying to look up a file while the parent was being deleted. This
was detected, and the added dentry was having d_invalidate() called
on it, but the deletion of the directory was also calling
d_invalidate() on that same dentry.
- A fix to not free the eventfs_inode (ei) until the last dput() was
called on its ei->dentry made the ei->dentry exist even after it
was marked for free by setting the ei->is_freed. But code elsewhere
still was checking if ei->dentry was NULL if ei->is_freed is set
and would trigger WARN_ON if that was the case. That's no longer
true and there should not be any warnings when it is true.
- Use GFP_NOFS for allocations done under eventfs_mutex. The
eventfs_mutex can be taken on file system reclaim, make sure that
allocations done under that mutex do not trigger file system
reclaim.
- Clean up code by moving the taking of inode_lock out of the helper
functions and into where they are needed, and not use the parameter
to know to take it or not. It must always be held but some callers
of the helper function have it taken when they were called.
- Warn if the inode_lock is not held in the helper functions.
- Warn if eventfs_start_creating() is called without a parent. As
eventfs is underneath tracefs, all files created will have a parent
(the top one will have a tracefs parent).
Tracing update:
- Add Mathieu Desnoyers as an official reviewer of the tracing subsystem"
* tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer
eventfs: Make sure that parent->d_inode is locked in creating files/dirs
eventfs: Do not allow NULL parent to eventfs_start_creating()
eventfs: Move taking of inode_lock into dcache_dir_open_wrapper()
eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held
eventfs: Do not invalidate dentry in create_file/dir_dentry()
eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL
|
|
Pull smb client fixes from Steve French:
- use after free fix in releasing multichannel interfaces
- fixes for special file types (report char, block, FIFOs properly when
created e.g. by NFS to Windows)
- fixes for reporting various special file types and symlinks properly
when using SMB1
* tag '6.7-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: introduce cifs_sfu_make_node()
smb: client: set correct file type from NFS reparse points
smb: client: introduce ->parse_reparse_point()
smb: client: implement ->query_reparse_point() for SMB1
cifs: fix use after free for iface while disabling secondary channels
|
|
bkey embeds a bpos that is misaligned on big endian; this is so that
bch2_bkey_swab() works correctly without having to differentiate between
packed and non-packed keys (a debatable design decision).
This means it can't have the __aligned() tag on big endian.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Durability of an erasure coded pointer doesn't add the device
durability; durability is the same for any extent in that stripe so the
calculation only comes from the stripe.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, there was a bug where if an extent had greater durability
than required (because we needed to move a durability=1 pointer and
ended up putting it on a durability 2 device), we would submit a write
for replicas=2 - the durability of the pointer being rewritten - instead
of the number of replicas required to bring it back up to the
data_replicas option.
This, plus the allocation path sometimes allocating on a greater
durability device than requested, meant that extents could continue
having more and more replicas added as they were being rewritten.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull xfs fix from Chandan Babu:
- Validate quota records recovered from the log before writing them to
the disk.
* tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: dquot recovery does not validate the recovered dquot
xfs: clean up dqblk extraction
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
- Fix the afs_server_list struct to be cleaned up with RCU
- Fix afs to translate a no-data result from a DNS lookup into ENOENT,
not EDESTADDRREQ for consistency with OpenAFS
- Fix afs to translate a negative DNS lookup result into ENOENT rather
than EDESTADDRREQ
- Fix file locking on R/O volumes to operate in local mode as the
server doesn't handle exclusive locks on such files
- Set SB_RDONLY on superblocks for RO and Backup volumes so that the
VFS can see that they're read only
* tag 'afs-fixes-20231124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Mark a superblock for an R/O or Backup volume as SB_RDONLY
afs: Fix file locking on R/O volumes to operate in local mode
afs: Return ENOENT if no cell DNS record can be found
afs: Make error on cell lookup failure consistent with OpenAFS
afs: Fix afs_server_list to be cleaned up with RCU
|
|
kernel_write() requires the caller to ensure that the file is writable.
Let's do that directly after looking up the ->send_fd.
We don't need a separate bailout path because the "out" path already
does fput() if ->send_filp is non-NULL.
This has no security impact for two reasons:
- the ioctl requires CAP_SYS_ADMIN
- __kernel_write() bails out on read-only files - but only since 5.8,
see commit a01ac27be472 ("fs: check FMODE_WRITE in __kernel_write")
Reported-and-tested-by: syzbot+12e098239d20385264d3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=12e098239d20385264d3
Fixes: 31db9f7c23fb ("Btrfs: introduce BTRFS_IOC_SEND for btrfs send/receive")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
If btrfs_alloc_page_array() fail to allocate all pages but part of the
slots, then the partially allocated pages would be leaked in function
btrfs_submit_compressed_read().
[CAUSE]
As explicitly stated, if btrfs_alloc_page_array() returned -ENOMEM,
caller is responsible to free the partially allocated pages.
For the existing call sites, most of them are fine:
- btrfs_raid_bio::stripe_pages
Handled by free_raid_bio().
- extent_buffer::pages[]
Handled btrfs_release_extent_buffer_pages().
- scrub_stripe::pages[]
Handled by release_scrub_stripe().
But there is one exception in btrfs_submit_compressed_read(), if
btrfs_alloc_page_array() failed, we didn't cleanup the array and freed
the array pointer directly.
Initially there is still the error handling in commit dd137dd1f2d7
("btrfs: factor out allocating an array of pages"), but later in commit
544fe4a903ce ("btrfs: embed a btrfs_bio into struct compressed_bio"),
the error handling is removed, leading to the possible memory leak.
[FIX]
This patch would add back the error handling first, then to prevent such
situation from happening again, also
Make btrfs_alloc_page_array() to free the allocated pages as a extra
safety net, then we don't need to add the error handling to
btrfs_submit_compressed_read().
Fixes: 544fe4a903ce ("btrfs: embed a btrfs_bio into struct compressed_bio")
CC: stable@vger.kernel.org # 6.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When the send protocol versioning was added in 5.16 e77fbf990316
("btrfs: send: prepare for v2 protocol"), the 32/64bit compat code was
not updated (added by 2351f431f727 ("btrfs: fix send ioctl on 32bit with
64bit kernel")), missing the version struct member. The compat code is
probably rarely used, nobody reported any bugs.
Found by tool https://github.com/jirislaby/clang-struct .
Fixes: e77fbf990316 ("btrfs: send: prepare for v2 protocol")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Avoid calling back into LSMs from vfs_getattr_nosec() calls.
IMA used to query inode properties accessing raw inode fields without
dedicated helpers. That was finally fixed a few releases ago by
forcing IMA to use vfs_getattr_nosec() helpers.
The goal of the vfs_getattr_nosec() helper is to query for attributes
without calling into the LSM layer which would be quite problematic
because incredibly IMA is called from __fput()...
__fput()
-> ima_file_free()
What it does is to call back into the filesystem to update the file's
IMA xattr. Querying the inode without using vfs_getattr_nosec() meant
that IMA didn't handle stacking filesystems such as overlayfs
correctly. So the switch to vfs_getattr_nosec() is quite correct. But
the switch to vfs_getattr_nosec() revealed another bug when used on
stacking filesystems:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
-> security_inode_getattr() # calls back into LSMs
Now, if that __fput() happens from task_work_run() of an exiting task
current->fs and various other pointer could already be NULL. So
anything in the LSM layer relying on that not being NULL would be
quite surprised.
Fix that by passing the information that this is a security request
through to the stacking filesystem by adding a new internal
ATT_GETATTR_NOSEC flag. Now the callchain becomes:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> if (AT_GETATTR_NOSEC)
vfs_getattr_nosec()
else
vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
- Fix a bug introduced with the iov_iter rework from last cycle.
This broke /proc/kcore by copying too much and without the correct
offset.
- Add a missing NULL check when allocating the root inode in
autofs_fill_super().
- Fix stable writes for multi-device filesystems (xfs, btrfs etc) and
the block device pseudo filesystem.
Stable writes used to be a superblock flag only, making it a per
filesystem property. Add an additional AS_STABLE_WRITES mapping flag
to allow for fine-grained control.
- Ensure that offset_iterate_dir() returns 0 after reaching the end of
a directory so it adheres to getdents() convention.
* tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
libfs: getdents() should return 0 after reaching EOD
xfs: respect the stable writes flag on the RT device
xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags
block: update the stable_writes flag in bdev_add
filemap: add a per-mapping stable writes flag
autofs: add: new_inode check in autofs_fill_super()
iov_iter: fix copy_page_to_iter_nofault()
fs: Pass AT_GETATTR_NOSEC flag to getattr interface function
|
|
Mark a superblock that is for for an R/O or Backup volume as SB_RDONLY when
mounting it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
AFS doesn't really do locking on R/O volumes as fileservers don't maintain
state with each other and thus a lock on a R/O volume file on one
fileserver will not be be visible to someone looking at the same file on
another fileserver.
Further, the server may return an error if you try it.
Fix this by doing what other AFS clients do and handle filelocking on R/O
volume files entirely within the client and don't touch the server.
Fixes: 6c6c1d63c243 ("afs: Provide mount-time configurable byte-range file locking emulation")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Make AFS return error ENOENT if no cell SRV or AFSDB DNS record (or
cellservdb config file record) can be found rather than returning
EDESTADDRREQ.
Also add cell name lookup info to the cursor dump.
Fixes: d5c32c89b208 ("afs: Fix cell DNS lookup")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
When allocating from devices with different durability, we might end up
with more replicas than required; this changes
bch2_alloc_sectors_start() to check for this, and drop replicas that
aren't needed to hit the number of replicas requested.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The btree iterator code overlays keys from the journal until journal
replay is finished; since we're now starting copygc/rebalance etc.
before replay is finished, this is multithreaded access and thus needs
refcounting.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Various userspace scripts/tools may expect mount entries in
/proc/mounts to reflect the device path names used to mount the
associated filesystem. bcachefs seems to normalize the device path
to the underlying device name based on the block device. This
confuses tools like fstests when the test devices might be lvm or
device-mapper based.
The default behavior for show_vfsmnt() appers to be to use the
string passed to alloc_vfsmnt(), so tweak bcachefs to copy the path
at device superblock read time and to display it via
->show_devname().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
cpu_to_le32(), not le32_to_cpu() - fixes a sparse complaint.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a bug where copygc would occasionally race with going
read-write and die, thinking we were read only, because it couldn't take
a ref on c->writes.
It's not necessary for copygc (or rebalance, or copygc) to take write
refs; they could run with BCH_TRANS_COMMIT_nocheck_rw, but this is an
easier fix that making sure that flag is passed correctly everywhere.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
copygc no longer has to scan the buckets, so it's no longer a problem if
the number of buckets is changing while it's running.
This also fixes a bug where we forgot to restart copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds move_ctxt_wait_event_timeout(), which can sleep for a timeout
while also issueing pending moves as reads complete.
Co-developed-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Introduce a new helper to flush all move IOs, and use it in a few places
where we should have been.
The new helper also drops btree locks before waiting on outstanding move
writes, avoiding potential deadlocks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We still have disk space accounting changes coming for erasure coding,
and the changes won't be as strictly backwards compatible as they'd
ought to be - specifically, we need to start accounting striped data
under a separate counter in bch_alloc (which describes buckets).
A fsck will suffice for upgrading/downgrading, but since erasure coding
is the most incomplete major feature of bcachefs it still makes sense to
put behind a separate kconfig option, so that users are fully aware.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Control flow integrity is now checking that type signatures match on
indirect function calls. That breaks closures, which embed a work_struct
in a closure in such a way that a closure_fn may also be used as a
workqueue fn by the underlying closure code.
So we have to change closure fns to take a work_struct as their
argument - but that results in a loss of clarity, as closure fns have
different semantics from normal workqueue functions (they run owning a
ref on the closure, which must be released with continue_at() or
closure_return()).
Thus, this patc introduces CLOSURE_CALLBACK() and closure_type() macros
as suggested by Kees, to smooth things over a bit.
Suggested-by: Kees Cook <keescook@chromium.org>
Cc: Coly Li <colyli@suse.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
ksmbd set ->op_state as OPLOCK_STATE_NONE on lease break ack error.
op_state of lease should not be updated because client can send lease
break ack again. This patch fix smb2.lease.breaking2 test failure.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Directly set SMB2_FLAGS_ASYNC_COMMAND flags and AsyncId in smb2 header of
interim response instead of current response header.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add missing release async id and delete interim response entry after
sending status pending response. This only cause when smb2 lease is enable.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ksmbd should process secound parallel smb2 create request during waiting
oplock break ack. parent lock range that is too large in smb2_open() causes
smb2_open() to be serialized. Move the oplock handling to the bottom of
smb2_open() and make it called after parent unlock. This fixes the failure
of smb2.lease.breaking1 testcase.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
xfstests generic/002 test fail when enabling smb2 leases feature.
This test create hard link file, but removeal failed.
ci has a file open count to count file open through the smb client,
but in the case of hard link files, The allocation of ci per inode
cause incorrectly open count for file deletion. This patch allocate
ci per dentry to counts open counts for hard link.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
[ 8743.393379] ======================================================
[ 8743.393385] WARNING: possible circular locking dependency detected
[ 8743.393391] 6.4.0-rc1+ #11 Tainted: G OE
[ 8743.393397] ------------------------------------------------------
[ 8743.393402] kworker/0:2/12921 is trying to acquire lock:
[ 8743.393408] ffff888127a14460 (sb_writers#8){.+.+}-{0:0}, at: ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd]
[ 8743.393510]
but task is already holding lock:
[ 8743.393515] ffff8880360d97f0 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: ksmbd_vfs_kern_path_locked+0x181/0x670 [ksmbd]
[ 8743.393618]
which lock already depends on the new lock.
[ 8743.393623]
the existing dependency chain (in reverse order) is:
[ 8743.393628]
-> #1 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}:
[ 8743.393648] down_write_nested+0x9a/0x1b0
[ 8743.393660] filename_create+0x128/0x270
[ 8743.393670] do_mkdirat+0xab/0x1f0
[ 8743.393680] __x64_sys_mkdir+0x47/0x60
[ 8743.393690] do_syscall_64+0x5d/0x90
[ 8743.393701] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 8743.393711]
-> #0 (sb_writers#8){.+.+}-{0:0}:
[ 8743.393728] __lock_acquire+0x2201/0x3b80
[ 8743.393737] lock_acquire+0x18f/0x440
[ 8743.393746] mnt_want_write+0x5f/0x240
[ 8743.393755] ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd]
[ 8743.393839] ksmbd_vfs_set_dos_attrib_xattr+0xcc/0x110 [ksmbd]
[ 8743.393924] compat_ksmbd_vfs_set_dos_attrib_xattr+0x39/0x50 [ksmbd]
[ 8743.394010] smb2_open+0x3432/0x3cc0 [ksmbd]
[ 8743.394099] handle_ksmbd_work+0x2c9/0x7b0 [ksmbd]
[ 8743.394187] process_one_work+0x65a/0xb30
[ 8743.394198] worker_thread+0x2cf/0x700
[ 8743.394209] kthread+0x1ad/0x1f0
[ 8743.394218] ret_from_fork+0x29/0x50
This patch add mnt_want_write() above parent inode lock and remove
nested mnt_want_write calls in smb2_open().
Fixes: 40b268d384a2 ("ksmbd: add mnt_want_write to ksmbd vfs functions")
Cc: stable@vger.kernel.org
Reported-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When allocated memory for 'new' failed,just return
will cause memory leak of 'ar'.
Fixes: 1819a9042999 ("ksmbd: reorganize ksmbd_iov_pin_rsp()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311031837.H3yo7JVl-lkp@intel.com/
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When getting a chunk map, at btrfs_get_chunk_map(), we do some sanity
checks to verify we found a chunk map and that map found covers the
logical address the caller passed in. However the messages aren't very
clear in the sense that don't mention the issue is with a chunk map and
one of them prints the 'length' argument as if it were the end offset of
the requested range (while the in the string format we use %llu-%llu
which suggests a range, and the second %llu-%llu is actually a range for
the chunk map). So improve these two details in the error messages.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_get_chunk_map() we get the extent map for the chunk that contains
the given logical address stored in the 'logical' argument. Then we do
sanity checks to verify the extent map contains the logical address. One
of these checks verifies if the extent map covers a range with an end
offset behind the target logical address - however this check has an
off-by-one error since it will consider an extent map whose start offset
plus its length matches the target logical address as inclusive, while
the fact is that the last byte it covers is behind the target logical
address (by 1).
So fix this condition by using '<=' rather than '<' when comparing the
extent map's "start + length" against the target logical address.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In btrfs_ref_tree_mod(), when !parent 're' was allocated through
kmalloc(). In the following code, if an error occurs, the execution will
be redirected to 'out' or 'out_unlock' and the function will be exited.
However, on some of the paths, 're' are not deallocated and may lead to
memory leaks.
For example: lookup_block_entry() for 'be' returns NULL, the out label
will be invoked. During that flow ref and 'ra' are freed but not 're',
which can potentially lead to a memory leak.
CC: stable@vger.kernel.org # 5.10+
Reported-and-tested-by: syzbot+d66de4cbf532749df35f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d66de4cbf532749df35f
Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a feature request to add dmesg output when unmounting a btrfs.
There are several alternative methods to do the same thing, but with
their own problems:
- Use eBPF to watch btrfs_put_super()/open_ctree()
Not end user friendly, they have to dip their head into the source
code.
- Watch for directory /sys/fs/<uuid>/
This is way more simple, but still requires some simple device -> uuid
lookups. And a script needs to use inotify to watch /sys/fs/.
Compared to all these, directly outputting the information into dmesg
would be the most simple one, with both device and UUID included.
And since we're here, also add the output when mounting a filesystem for
the first time for parity. A more fine grained monitoring of subvolume
mounts should be done by another layer, like audit.
Now mounting a btrfs with all default mkfs options would look like this:
[81.906566] BTRFS info (device dm-8): first mount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2
[81.907494] BTRFS info (device dm-8): using crc32c (crc32c-intel) checksum algorithm
[81.908258] BTRFS info (device dm-8): using free space tree
[81.912644] BTRFS info (device dm-8): auto enabling async discard
[81.913277] BTRFS info (device dm-8): checking UUID tree
[91.668256] BTRFS info (device dm-8): last unmount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2
CC: stable@vger.kernel.org # 5.4+
Link: https://github.com/kdave/btrfs-progs/issues/689
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove duplicate code and add new helper for creating special files in
SFU (Services for UNIX) format that can be shared by SMB1+ code.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Handle all file types in NFS reparse points as specified in MS-FSCC
2.1.2.6 Network File System (NFS) Reparse Data Buffer.
The client is now able to set all file types based on the parsed NFS
reparse point, which used to support only symlinks. This works for
SMB1+.
Before patch:
$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
ls: cannot access 'block': Operation not supported
ls: cannot access 'char': Operation not supported
ls: cannot access 'fifo': Operation not supported
ls: cannot access 'sock': Operation not supported
total 1
l????????? ? ? ? ? ? block
l????????? ? ? ? ? ? char
-rwxr-xr-x 1 root root 5 Nov 18 23:22 f0
l????????? ? ? ? ? ? fifo
l--------- 1 root root 0 Nov 18 23:23 link -> f0
l????????? ? ? ? ? ? sock
After patch:
$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
total 1
brwxr-xr-x 1 root root 123, 123 Nov 18 00:34 block
crwxr-xr-x 1 root root 1234, 1234 Nov 18 00:33 char
-rwxr-xr-x 1 root root 5 Nov 18 23:22 f0
prwxr-xr-x 1 root root 0 Nov 18 23:23 fifo
lrwxr-xr-x 1 root root 0 Nov 18 23:23 link -> f0
srwxr-xr-x 1 root root 0 Nov 19 2023 sock
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Parse reparse point into cifs_open_info_data structure and feed it
through cifs_open_info_to_fattr().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Reparse points are not limited to symlinks, so implement
->query_reparse_point() in order to handle different file types.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We were deferencing iface after it has been released. Fix is to
release after all dereference instances have been encountered.
Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311110815.UJaeU3Tt-lkp@intel.com/
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since the locking of the parent->d_inode has been moved outside the
creation of the files and directories (as it use to be locked via a
conditional), add a WARN_ON_ONCE() to the case that it's not locked.
Link: https://lkml.kernel.org/r/20231121231112.853962542@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The eventfs directory is dynamically created via the meta data supplied by
the existing trace events. All files and directories in eventfs has a
parent. Do not allow NULL to be passed into eventfs_start_creating() as
the parent because that should never happen. Warn if it does.
Link: https://lkml.kernel.org/r/20231121231112.693841807@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The both create_file_dentry() and create_dir_dentry() takes a boolean
parameter "lookup", as on lookup the inode_lock should already be taken,
but for dcache_dir_open_wrapper() it is not taken.
There's no reason that the dcache_dir_open_wrapper() can't take the
inode_lock before calling these functions. In fact, it's better if it
does, as the lock can be held throughout both directory and file
creations.
This also simplifies the code, and possibly prevents unexpected race
conditions when the lock is released.
Link: https://lkml.kernel.org/r/20231121231112.528544825@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If memory reclaim happens, it can reclaim file system pages. The file
system pages from eventfs may take the eventfs_mutex on reclaim. This
means that allocation while holding the eventfs_mutex must not call into
filesystem reclaim. A lockdep splat uncovered this.
Link: https://lkml.kernel.org/r/20231121231112.373501894@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 28e12c09f5aa0 ("eventfs: Save ownership and mode")
Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When we're recovering ondisk quota records from the log, we need to
validate the recovered buffer contents before writing them to disk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Since the introduction of xfs_dqblk in V5, xfs really ought to find the
dqblk pointer from the dquot buffer, then compute the xfs_disk_dquot
pointer from the dqblk pointer. Fix the open-coded xfs_buf_offset calls
and do the type checking in the correct order.
Note that this has made no practical difference since the start of the
xfs_disk_dquot is coincident with the start of the xfs_dqblk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Commit "filemap: update ki_pos in generic_perform_write", made updating
of ki_pos into common code in generic_perform_write() function.
This also causes generic/091 to fail.
This happened due to an in-flight collision with:
fb5de4358e1a ("ext2: Move direct-io to use iomap"). I have chosen fixes tag
based on which commit got landed later to upstream kernel.
Fixes: 182c25e9c157 ("filemap: update ki_pos in generic_perform_write")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <d595bee9f2475ed0e8a2e7fb94f7afc2c6ffc36a.1700643443.git.ritesh.list@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Tidy up erofs_read_inode() for simplicity
- Fix broken fscache mode due to NULL dereference of dif->bdev_handle
- Add the EROFS webpage to MAINTAINERS, documentation, and Kconfig
* tag 'erofs-for-6.7-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
MAINTAINERS: erofs: add EROFS webpage
erofs: fix NULL dereference of dif->bdev_handle in fscache mode
erofs: simplify erofs_read_inode()
|
|
With the call to simple_recursive_removal() on the entire eventfs sub
system when the directory is removed, it performs the d_invalidate on all
the dentries when it is removed. There's no need to do clean ups when a
dentry is being created while the directory is being deleted.
As dentries are cleaned up by the simpler_recursive_removal(), trying to
do d_invalidate() in these functions will cause the dentry to be
invalidated twice, and crash the kernel.
Link: https://lore.kernel.org/all/20231116123016.140576-1-naresh.kamboju@linaro.org/
Link: https://lkml.kernel.org/r/20231120235154.422970988@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 407c6726ca71 ("eventfs: Use simple_recursive_removal() to clean up dentries")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The logic to free the eventfs_inode (ei) use to set is_freed and clear the
"dentry" field under the eventfs_mutex. But that changed when a race was
found where the ei->dentry needed to be cleared when the last dput() was
called on it. But there was still logic that checked if ei->dentry was not
NULL and is_freed is set, and would warn if it was.
But since that situation was changed and the ei->dentry isn't cleared
until the last dput() is called on it while the ei->is_freed is set, do
not test for that condition anymore, and change the comments to reflect
that.
Link: https://lkml.kernel.org/r/20231120235154.265826243@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 020010fbfa20 ("eventfs: Delete eventfs_inode when the last dentry is freed")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
