| Age | Commit message (Collapse) | Author |
|---|
|
The superblock's ->s_fs_info is properly set in btrfs_fill_super, after
a call to open_ctree, which derefereces it before check. Although
tree_root is set via btrfs_set_super, let's be defensive and leave the
check in place.
Signed-off-by: David Sterba <dsterba@suse.cz>
|
|
Signed-off-by: David Sterba <dsterba@suse.cz>
|
|
reported by gcc -Wshadow:
page_index, page_offset, new_inode, dev_name
Signed-off-by: David Sterba <dsterba@suse.cz>
|
|
If an application program does not make any changes to the indirect
blocks or extent tree, i_datasync_tid will not get updated. If there
are enough commits (i.e., 2**31) such that tid_geq()'s calculations
wrap, and there isn't a currently active transaction at the time of
the fdatasync() call, this can end up triggering a BUG_ON in
fs/jbd2/commit.c:
J_ASSERT(journal->j_running_transaction != NULL);
It's pretty rare that this can happen, since it requires the use of
fdatasync() plus *very* frequent and excessive use of fsync(). But
with the right workload, it can.
We fix this by replacing the use of tid_geq() with an equality test,
since there's only one valid transaction id that we is valid for us to
wait until it is commited: namely, the currently running transaction
(if it exists).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
percpu_counter_sum_positive() never returns a negative value.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This is an effective revert of commit a30eec2a8: "ext4: stop issuing
discards if not supported by device". The problem is that there are
some devices that may return errors in response to a discard request
some times but not others. (One example would be a hybrid dm device
which concatenates an SSD and an HDD device).
By this logic, I also removed the error checking from ext4's FITRIM
code; so that an error from a discard will not stop the FITRIM from
trying to trim the rest of the file system.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
In the bio completion routine, we should not be setting
PageUptodate at all -- it's set at sys_write() time, and is
unaffected by success/failure of the write to disk.
This can cause a page corruption bug when the file system's
block size is less than the architecture's VM page size.
if we have only written a single block -- we might end up
setting the page's PageUptodate flag, indicating that page
is completely read into memory, which may not be true.
This could cause subsequent reads to get bad data.
This commit also takes the opportunity to clean up error
handling in ext4_end_bio(), and remove some extraneous code:
- fixes ext4_end_bio() to set AS_EIO in the
page->mapping->flags on error, which was left out by
mistake. This is needed so that fsync() will
return an error if there was an I/O error.
- remove the clear_buffer_dirty() call on unmapped
buffers for each page.
- consolidate page/buffer error handling in a single
section.
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Jim Meyering <jim@meyering.net>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Mingming Cao <cmm@us.ibm.com>
|
|
Compiling gave me this warning:
fs/nfsd/nfs4xdr.c: In function ‘nfsd4_decode_bind_conn_to_session’:
fs/nfsd/nfs4xdr.c:427:6: warning: variable ‘dummy’ set but not used
[-Wunused-but-set-variable]
The local variable "dummy" wasn't being used past the READ32() macro that
set it. READ_BUF() should ensure that the xdr buffer is pushed past the
data read into dummy already, so nothing needs to be read in.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
[bfields@redhat.com: minor comment fixup.]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Compiling gave me this warning:
fs/nfsd/nfs4state.c: In function ‘nfsd4_bind_conn_to_session’:
fs/nfsd/nfs4state.c:1623:9: warning: variable ‘status’ set but not used
[-Wunused-but-set-variable]
The local variable "status" was being set by nfsd4_map_bcts_dir() and
then ignored before calling nfsd4_new_conn().
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Compiling gave me this warning:
fs/nfsd/vfs.c: In function ‘nfsd_vfs_read’:
fs/nfsd/vfs.c:880:16: warning: variable ‘inode’ set but not used
[-Wunused-but-set-variable]
I discovered that a local variable "inode" was being set towards the
beginning of nfsd_vfs_read() and then ignored for the rest of the
function.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Servers are supposed to return nfserr_complete_already to clients that
attempt to send multiple RECLAIM_COMPLETEs.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Make sure nfs server errors out if request contains more ops
than channel allows.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
[bfields@redhat.com: use helper function]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
RFC 5661 Section 18.11.3
The clientid field of the owner MAY be set to any value by the client
and MUST be ignored by the server. The reason the server MUST ignore
the clientid field is that the server MUST derive the client ID from
the session ID from the SEQUENCE operation of the COMPOUND request.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Teach the NFS server to reject invalid create_session flags.
Also do some minor formatting adjustments.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The NFS server uses nfsd_create_v3 to handle EXCLUSIVE4_1 opens, but
that function is not prepared to handle them.
Rename nfsd_create_v3() to do_nfsd_create(), and add handling of
EXCLUSIVE4_1.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
When PUTFH is followed by an operation that uses the filehandle, and
when the current client is using a security flavor that is inconsistent
with the given filehandle, we have a choice: we can return WRONGSEC
either when the current filehandle is set using the PUTFH, or when the
filehandle is first used by the following operation.
Follow the recommendations of RFC 5661 in making this choice.
(Our current behavior prevented the client from doing security
negotiation by returning WRONGSEC on PUTFH+SECINFO_NO_NAME.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
ext3_symlink() cannot call __page_symlink() with transaction open.
__page_symlink() calls ext3_write_begin() which gets page lock which ranks
above transaction start (thus lock ordering is violated) and and also
ext3_write_begin() waits for a transaction commit when we run out of space
which never happens if we hold transaction open.
Fix the problem by stopping a transaction before calling __page_symlink()
(we have to be careful and put inode to orphan list so that it gets deleted
in case of crash) and starting another one after __page_symlink() returns
for addition of symlink into a directory.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
__blkdev_get() doesn't rescan partitions if disk->fops->open() fails,
which leads to ghost partition devices lingering after medimum removal
is known to both the kernel and userland. The behavior also creates a
subtle inconsistency where O_NONBLOCK open, which doesn't fail even if
there's no medium, clears the ghots partitions, which is exploited to
work around the problem from userland.
Fix it by updating __blkdev_get() to issue partition rescan after
-ENOMEDIA too.
This was reported in the following bz.
https://bugzilla.kernel.org/show_bug.cgi?id=13029
Stable: 2.6.38
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: David Zeuthen <zeuthen@gmail.com>
Reported-by: Martin Pitt <martin.pitt@ubuntu.com>
Reported-by: Kay Sievers <kay.sievers@vrfy.org>
Tested-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
There are a couple of places in this code where these values can wrap or
go negative, and that could potentially end up overflowing the buffer.
Ensure that that doesn't happen. Do all of the length calculation and
checks first, and only perform the memcpy after they pass.
Also, increase some stack variables to 32 bits to ensure that they don't
wrap without being detected.
Finally, change the error codes to be a bit more descriptive of any
problems detected. -EINVAL isn't very accurate.
Cc: stable@kernel.org
Reported-and-Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
It's possible that when we go to decode the string area in the
SESSION_SETUP response, that bytes_remaining will be 0. Decrementing it at
that point will mean that it can go "negative" and wrap. Check for a
bytes_remaining value of 0, and don't try to decode the string area if
that's the case.
Cc: stable@kernel.org
Reported-and-Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
The buffer length checks in this function depend on this value being a
signed data type, but 690c522fa converted it to an unsigned type.
Also, eliminate a problem with the null termination check in the same
function. cifs_strndup_from_ucs handles that situation correctly
already, and the existing check could potentially lead to a buffer
overrun since it increments bleft without checking to see whether it
falls off the end of the buffer.
Cc: stable@kernel.org
Reported-and-Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
nfs: don't lose MS_SYNCHRONOUS on remount of noac mount
NFS: Return meaningful status from decode_secinfo()
NFSv4: Ensure we request the ordinary fileid when doing readdirplus
NFSv4: Ensure that clientid and session establishment can time out
SUNRPC: Allow RPC calls to return ETIMEDOUT instead of EIO
NFSv4.1: Don't loop forever in nfs4_proc_create_session
NFSv4: Handle NFS4ERR_WRONGSEC outside of nfs4_handle_exception()
NFSv4.1: Don't update sequence number if rpc_task is not sent
NFSv4.1: Ensure state manager thread dies on last umount
SUNRPC: Fix the SUNRPC Kerberos V RPCSEC_GSS module dependencies
NFS: Use correct variable for page bounds checking
NFS: don't negotiate when user specifies sec flavor
NFS: Attempt mount with default sec flavor first
NFS: flav_array honors NFS_MAX_SECFLAVORS
NFS: Fix infinite loop in gss_create_upcall()
Don't mark_inode_dirty_sync() while holding lock
NFS: Get rid of pointless test in nfs_commit_done
NFS: Remove unused argument from nfs_find_best_sec()
NFS: Eliminate duplicate call to nfs_mark_request_dirty
NFS: Remove dead code from nfs_fs_mount()
|
|
Azurit reports large increases in system time after 2.6.36 when running
Apache. It was bisected down to a892e2d7dcdfa6c76e6 ("vfs: use kmalloc()
to allocate fdmem if possible").
That patch caused the vfs to use kmalloc() for very large allocations and
this is causing excessive work (and presumably excessive reclaim) within
the page allocator.
Fix it by falling back to vmalloc() earlier - when the allocation attempt
would have been considered "costly" by reclaim.
Reported-by: azurIt <azurit@pobox.sk>
Tested-by: azurIt <azurit@pobox.sk>
Acked-by: Changli Gao <xiaosuo@gmail.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
XFS_IOC_ZERO_RANGE uses struct xfs_flock64, and thus requires argument
translation for 32-bit binaries on x86. Add the required
XFS_IOC_ZERO_RANGE_32 defined and add it to the list of commands that
require xfs_flock64 translation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
xfs_fsblock_t may be a 32-bit type on if XFS_BIG_BLKNOS is not set,
make sure to cast a value of this type to an unsigned long long
before using the ll printk qualifier.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
follow these guidelines:
- leave initialization in the declaration block if it fits the line
- move to the code where it's more suitable ('for' init block)
The last chunk was modified from David's original to be a correct
fix for what appeared to be a duplicate initialization.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Instead of finding the per-ag and then taking and releasing the pagb_lock
for every single busy extent completed sort the list of busy extents and
only switch betweens AGs where nessecary. This becomes especially important
with the online discard support which will hit this lock more often.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Update the extent tree in case we have to reuse a busy extent, so that it
always is kept uptodate. This is done by replacing the busy list searches
with a new xfs_alloc_busy_reuse helper, which updates the busy extent tree
in case of a reuse. This allows us to allow reusing metadata extents
unconditionally, and thus avoid log forces especially for allocation btree
blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Every time we reallocate a busy extent, we cause a synchronous log force
to occur to ensure the freeing transaction is on disk before we continue
and use the newly allocated extent. This is extremely sub-optimal as we
have to mark every transaction with blocks that get reused as synchronous.
Instead of searching the busy extent list after deciding on the extent to
allocate, check each candidate extent during the allocation decisions as
to whether they are in the busy list. If they are in the busy list, we
trim the busy range out of the extent we have found and determine if that
trimmed range is still OK for allocation. In many cases, this check can
be incorporated into the allocation extent alignment code which already
does trimming of the found extent before determining if it is a valid
candidate for allocation.
Based on earlier patches from Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
While we need to make sure we do not reuse busy extents, there is no need
to force out busy extents when moving them between the AGFL and the
freespace btree as we still take care of that when doing the real allocation.
To avoid the log force when just moving extents from the different free
space tracking structures, move the busy search out of
xfs_alloc_get_freelist into the callers that need it, and move the busy
list insert from xfs_free_ag_extent which is used both by AGFL refills
and real allocation to xfs_free_extent, which is only used by the latter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
On a remount, the VFS layer will clear the MS_SYNCHRONOUS bit on the
assumption that the flags on the mount syscall will have it set if the
remounted fs is supposed to keep it.
In the case of "noac" though, MS_SYNCHRONOUS is implied. A remount of
such a mount will lose the MS_SYNCHRONOUS flag since "sync" isn't part
of the mount options.
Reported-by: Max Matveev <makc@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
When compiling, I was getting this warning:
fs/nfs/nfs4xdr.c: In function ‘decode_secinfo’:
fs/nfs/nfs4xdr.c:4839:6: warning: variable ‘status’ set but not used
[-Wunused-but-set-variable]
We were unconditionally returning 0 as long as there wasn't an error
coming out of xdr_inline_decode(). We probably want to check the error
status coming out of decode_op_hdr() and decode_secinfo_gss(), rather
than assuming that everything is OK all the time.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
When readdir() returns a directory entry for the root of a mounted
filesystem, Linux follows the old convention of returning the inode
number of the covered directory (despite newer versions of POSIX declaring
that this is a bug).
To ensure this continues to work, the NFSv4 readdir implementation requests
the 'mounted-on-fileid' from the server.
However, readdirplus also needs to instantiate an inode for this entry, and
for that, we also need to request the real fileid as per this patch.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
These changes were incorrectly fixed by codespell. They were now
manually corrected.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: cleanup error handling in inode.c
Btrfs: put the right bio if we have an error
Btrfs: free bitmaps properly when evicting the cache
Btrfs: Free free_space item properly in btrfs_trim_block_group()
btrfs: add missing spin_unlock to a rare exit path
Btrfs: check return value of kmalloc()
btrfs: fix wrong allocating flag when reading page
Btrfs: fix missing mutex_unlock in btrfs_del_dir_entries_in_log()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: do some plugging in the submit_bio threads
|
|
Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
CIFS: Fix memory over bound bug in cifs_parse_mount_options
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
eCryptfs: Flush dirty pages in setattr
eCryptfs: Handle failed metadata read in lookup
eCryptfs: Add reference counting to lower files
eCryptfs: dput dentries returned from dget_parent
eCryptfs: Remove extra d_delete in ecryptfs_rmdir
|
|
Now that the whole dcache_hash_bucket crap is gone, go all the way and
also remove the weird locking layering violations for locking the hash
buckets. Add hlist_bl_lock/unlock helpers to move the locking into the
list abstraction instead of requiring each caller to open code it.
After all allowing for the bit locks is the whole point of these helpers
over the plain hlist variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After 57db4e8d73ef2b5e94a3f412108dff2576670a8a changed eCryptfs to
write-back caching, eCryptfs page writeback updates the lower inode
times due to the use of vfs_write() on the lower file.
To preserve inode metadata changes, such as 'cp -p' does with
utimensat(), we need to flush all dirty pages early in
ecryptfs_setattr() so that the user-updated lower inode metadata isn't
clobbered later in writeback.
https://bugzilla.kernel.org/show_bug.cgi?id=33372
Reported-by: Rocko <rockorequin@hotmail.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
|
|
When failing to read the lower file's crypto metadata during a lookup,
eCryptfs must continue on without throwing an error. For example, there
may be a plaintext file in the lower mount point that the user wants to
delete through the eCryptfs mount.
If an error is encountered while reading the metadata in lookup(), the
eCryptfs inode's size could be incorrect. We must be sure to reread the
plaintext inode size from the metadata when performing an open() or
setattr(). The metadata is already being read in those paths, so this
adds minimal performance overhead.
This patch introduces a flag which will track whether or not the
plaintext inode size has been read so that an incorrect i_size can be
fixed in the open() or setattr() paths.
https://bugs.launchpad.net/bugs/509180
Cc: <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
|
|
The error processing of several places is changed like setting the
error number only at the error.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
In btrfs_submit_direct_hook if the first btrfs_map_block fails we need to put
the orig_bio, not bio.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
If our space cache is wrong, we do the right thing and free up everything that
we loaded, however we don't reset the total_bitmaps counter or the thresholds or
anything. So in btrfs_remove_free_space_cache make sure to call free_bitmap()
if it's a bitmap, this will keep us from panicing when we check to make sure we
don't have too many bitmaps. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Since commit dc89e9824464e91fa0b06267864ceabe3186fd8b, we've changed
to use a specific slab for alocation of free_space items.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
The check on the return value of kmalloc() is added to some places.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
the space cache use extent_readpages() to read free space information,
so we can not use GFP_KERNEL flag to allocate memory, or it may lead
to deadlock.
Signed-off-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
It is necessary to unlock mutex_lock before it return an error when
btrfs_alloc_path() fails.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
