| Age | Commit message (Collapse) | Author |
|---|
|
With verification being done as an IO completion callback, different
errors can be returned from a read. Uncached reads only return a
buffer or NULL on failure, which means the verification error cannot
be returned to the caller.
Split the error handling for these reads into two - a failure to get
a buffer will still return NULL, but a read error will return a
referenced buffer with b_error set rather than NULL. The caller is
responsible for checking the error state of the buffer returned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
Add a verifier function callback capability to the buffer read
interfaces. This will be used by the callers to supply a function
that verifies the contents of the buffer when it is read from disk.
This patch does not provide callback functions, but simply modifies
the interfaces to allow them to be called.
The reason for adding this to the read interfaces is that it is very
difficult to tell fom the outside is a buffer was just read from
disk or whether we just pulled it out of cache. Supplying a callbck
allows the buffer cache to use it's internal knowledge of the buffer
to execute it only when the buffer is read from disk.
It is intended that the verifier functions will mark the buffer with
an EFSCORRUPTED error when verification fails. This allows the
reading context to distinguish a verification error from an IO
error, and potentially take further actions on the buffer (e.g.
attempt repair) based on the error reported.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
inode->i_private is promised to be NULL on allocation, no need to set it
explicitly.
Signed-off-by: Yan Hong <clouds.yan@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull UBIFS fixes from Artem Bityutskiy:
"Two patches which fix a problem reported by several people in the
past, but only fixed now because no one gave enough material for
debugging.
Anyway, these fix the problem that sometimes after a power cut the
file-system is not mountable with the following symptom:
grab_empty_leb: could not find an empty LEB
The fixes make the file-system mountable again."
* tag 'upstream-3.7-rc6' of git://git.infradead.org/linux-ubifs:
UBIFS: fix mounting problems after power cuts
UBIFS: introduce categorized lprops counter
|
|
This patch moves laundromat_work to nfsd per-net context, thus allowing to run
multiple laundries.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Passing net context looks as overkill.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This patch replaces init_net by SVC_NET(), where possible and also passes
proper context to nested functions where required.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This list holds nfs4 clients (open) stateowner queue for last close replay,
which are network namespace aware. So let's make this list per network
namespace too.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This list holds nfs4 clients queue for lease renewal, which are network
namespace aware. So let's make this list per network namespace too.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This hash holds established sessions state and closely associated with
nfs4_clients info, which are network namespace aware. So let's make it
allocated per network namespace too.
Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This hash holds file lock owners and closely associated with nfs4_clients info,
which are network namespace aware. So let's make it allocated per network
namespace too.
Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This hash holds open owner state and closely associated with nfs4_clients
info, which are network namespace aware. So let's make it allocated per
network namespace too.
Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.
Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This tree holds nfs4_clients info, which are network namespace aware.
So let's make it per network namespace.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.
Note: this hash can be allocated in per-net operations. But it looks
better to allocate it on nfsd state start and thus don't waste resources
if server is not running.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.
Note: this hash is used only by legacy tracker. So let's allocate hash in
tracker init.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
And use it's net where possible.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The lksb struct already contains a pointer to the lvb,
so another directly from the glock struct is not needed.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Save the effort of allocating, reading and writing
the lvb for most glocks that do not use it.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Use kuid_t and kgid_t in struct fuse_conn and struct fuse_mount_data.
The connection between between a fuse filesystem and a fuse daemon is
established when a fuse filesystem is mounted and provided with a file
descriptor the fuse daemon created by opening /dev/fuse.
For now restrict the communication of uids and gids between the fuse
filesystem and the fuse daemon to the initial user namespace. Enforce
this by verifying the file descriptor passed to the mount of fuse was
opened in the initial user namespace. Ensuring the mount happens in
the initial user namespace is not necessary as mounts from non-initial
user namespaces are not yet allowed.
In fuse_req_init_context convert the currrent fsuid and fsgid into the
initial user namespace for the request that will be sent to the fuse
daemon.
In fuse_fill_attr convert the uid and gid passed from the fuse daemon
from the initial user namespace into kuids and kgids.
In iattr_to_fattr called from fuse_setattr convert kuids and kgids
into the uids and gids in the initial user namespace before passing
them to the fuse filesystem.
In fuse_change_attributes_common called from fuse_dentry_revalidate,
fuse_permission, fuse_geattr, and fuse_setattr, and fuse_iget convert
the uid and gid from the fuse daemon into a kuid and a kgid to store
on the fuse inode.
By default fuse mounts are restricted to task whose uid, suid, and
euid matches the fuse user_id and whose gid, sgid, and egid matches
the fuse group id. Convert the user_id and group_id mount options
into kuids and kgids at mount time, and use uid_eq and gid_eq to
compare the in fuse_allow_task.
Cc: Miklos Szeredi <miklos@szeredi.hu>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Use kuid_t and kgid_t in struct autofs_info and struct autofs_wait_queue.
When creating directories and symlinks default the uid and gid of
the mount requester to the global root uid and gid. autofs4_wait
will update these fields when a mount is requested.
When generating autofsv5 packets report the uid and gid of the mount
requestor in user namespace of the process that opened the pipe,
reporting unmapped uids and gids as overflowuid and overflowgid.
In autofs_dev_ioctl_requester return the uid and gid of the last mount
requester converted into the calling processes user namespace. When the
uid or gid don't map return overflowuid and overflowgid as appropriate,
allowing failure to find a mount requester to be distinguished from
failure to map a mount requester.
The uid and gid mount options specifying the user and group of the
root autofs inode are converted into kuid and kgid as they are parsed
defaulting to the current uid and current gid of the process that
mounts autofs.
Mounting of autofs for the present remains confined to processes in
the initial user namespace.
Cc: Ian Kent <raven@themaw.net>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
ext4_da_block_invalidatepages is missing a pagevec_init(),
which means that pvec->cold contains random garbage.
This affects whether the page goes to the front or
back of the LRU when ->cold makes it to
free_hot_cold_page()
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
Passing a NULL id causes a NULL pointer deference in writers such as
erst_writer and efi_pstore_write because they expect to update this id.
Pass a dummy id instead.
This avoids a cascade of oopses caused when the initial
pstore_console_write passes a null which in turn causes writes to the
console causing further oopses in subsequent pstore_console_write calls.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
|
|
It's just a simple wrapper around VFS functionality, and is actually
bugging in that it doesn't remove mappings before invalidating the
page cache. Remove it and replace it with the correct VFS
functionality.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Andrew Dahl <adahl@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
It is a complex wrapper around VFS functions, but there are VFS
functions that provide exactly the same functionality. Call the VFS
functions directly and remove the unnecessary indirection and
complexity.
We don't need to care about clearing the XFS_ITRUNCATED flag, as
that is done during .writepages. Hence is cleared by the VFS
writeback path if there is anything to write back during the flush.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Andrew Dahl <adahl@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
It's just a simple wrapper around a VFS function that is only called
by another function in xfs_fs_subr.c. Remove it and call the VFS
function directly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Andrew Dahl <adahl@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
Reversing the check on XFS_IOC_ZERO_RANGE.
Range should be zeroed if the start is less than or equal to the end.
Signed-off-by: Andrew Dahl <adahl@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
It's a buggy, unnecessary wrapper that is duplicating
truncate_pagecache_range().
When replacing the call in xfs_change_file_space(), also ensure that
the length being allocated/freed is always positive before making
any changes. These checks are done in the lower extent manipulation
functions, too, but we need to do them before any page cache
operations.
Reported-by: Andrew Dahl <adahl@sgi.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-By: Andrew Dahl <adahl@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
This pulls in the 3.7-rc5 fixes into tty-next to make it easier to test.
|
|
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
When unmounting, gfs2 does a full dlm_unlock operation on every
cached lock. This can create a very large amount of work and can
take a long time to complete. However, the vast majority of these
dlm unlock operations are unnecessary because after all the unlocks
are done, gfs2 leaves the dlm lockspace, which automatically clears
the locks of the leaving node, without unlocking each one individually.
So, gfs2 can skip explicit dlm unlocks, and use dlm_release_lockspace to
remove the locks implicitly. The one exception is when the lock's lvb is
being used. In this case, dlm_unlock is called because it may update the
lvb of the resource.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
For verification purposes, AGFLs need to be initialised to a known
set of values. For upcoming CRC changes, they are also headers that
need to be initialised. Currently, growfs does neither for the AGFLs
- it ignores them completely. Add initialisation of the AGFL to be
full of invalid block numbers (NULLAGBLOCK) to put the
infrastructure in place needed for CRC support.
Includes a comment clarification from Jeff Liu.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
When writing the new AG headers to disk, we can't attach write
verifiers because they have a dependency on the struct xfs-perag
being attached to the buffer to be fully initialised and growfs
can't fully initialise them until later in the process.
The simplest way to avoid this problem is to use uncached buffers
for writing the new headers. These buffers don't have the xfs-perag
attached to them, so it's simple to detect in the write verifier and
be able to skip the checks that need the xfs-perag.
This enables us to attach the appropriate buffer ops to the buffer
and hence calculate CRCs on the way to disk. IT also means that the
buffer is torn down immediately, and so the first access to the AG
headers will re-read the header from disk and perform full
verification of the buffer. This way we also can catch corruptions
due to problems that went undetected in growfs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
Factor xfs_btree_init_block() to be independent of the btree cursor,
and use the function to initialise btree blocks in the growfs code.
This makes adding support for different format btree blocks simple.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
Added when debugging recent attribute tree problems to more finely
trace code execution through the maze of twisty passages that makes
up the attr code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
Error handling in xfs_buf_ioapply_map() does not handle IO reference
counts correctly. We increment the b_io_remaining count before
building the bio, but then fail to decrement it in the failure case.
This leads to the buffer never running IO completion and releasing
the reference that the IO holds, so at unmount we can leak the
buffer. This leak is captured by this assert failure during unmount:
XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/xfs_mount.c, line: 273
This is not a new bug - the b_io_remaining accounting has had this
problem for a long, long time - it's just very hard to get a
zero length bio being built by this code...
Further, the buffer IO error can be overwritten on a multi-segment
buffer by subsequent bio completions for partial sections of the
buffer. Hence we should only set the buffer error status if the
buffer is not already carrying an error status. This ensures that a
partial IO error on a multi-segment buffer will not be lost. This
part of the problem is a regression, however.
cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
When we shut down the filesystem, it might first be detected in
writeback when we are allocating a inode size transaction. This
happens after we have moved all the pages into the writeback state
and unlocked them. Unfortunately, if we fail to set up the
transaction we then abort writeback and try to invalidate the
current page. This then triggers are BUG() in block_invalidatepage()
because we are trying to invalidate an unlocked page.
Fixing this is a bit of a chicken and egg problem - we can't
allocate the transaction until we've clustered all the pages into
the IO and we know the size of it (i.e. whether the last block of
the IO is beyond the current EOF or not). However, we don't want to
hold pages locked for long periods of time, especially while we lock
other pages to cluster them into the write.
To fix this, we need to make a clear delineation in writeback where
errors can only be handled by IO completion processing. That is,
once we have marked a page for writeback and unlocked it, we have to
report errors via IO completion because we've already started the
IO. We may not have submitted any IO, but we've changed the page
state to indicate that it is under IO so we must now use the IO
completion path to report errors.
To do this, add an error field to xfs_submit_ioend() to pass it the
error that occurred during the building on the ioend chain. When
this is non-zero, mark each ioend with the error and call
xfs_finish_ioend() directly rather than building bios. This will
immediately push the ioends through completion processing with the
error that has occurred.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
In certain circumstances, a double split of an attribute tree is
needed to insert or replace an attribute. In rare situations, this
can go wrong, leaving the attribute tree corrupted. In this case,
the attr being replaced is the last attr in a leaf node, and the
replacement is larger so doesn't fit in the same leaf node.
When we have the initial condition of a node format attribute
btree with two leaves at index 1 and 2. Call them L1 and L2. The
leaf L1 is completely full, there is not a single byte of free space
in it. L2 is mostly empty. The attribute being replaced - call it X
- is the last attribute in L1.
The way an attribute replace is executed is that the replacement
attribute - call it Y - is first inserted into the tree, but has an
INCOMPLETE flag set on it so that list traversals ignore it. Once
this transaction is committed, a second transaction it run to
atomically mark Y as COMPLETE and X as INCOMPLETE, so that a
traversal will now find Y and skip X. Once that transaction is
committed, attribute X is then removed.
So, the initial condition is:
+--------+ +--------+
| L1 | | L2 |
| fwd: 2 |---->| fwd: 0 |
| bwd: 0 |<----| bwd: 1 |
| fsp: 0 | | fsp: N |
|--------| |--------|
| attr A | | attr 1 |
|--------| |--------|
| attr B | | attr 2 |
|--------| |--------|
.......... ..........
|--------| |--------|
| attr X | | attr n |
+--------+ +--------+
So now we go to replace X, and see that L1:fsp = 0 - it is full so
we can't insert Y in the same leaf. So we record the the location of
attribute X so we can track it for later use, then we split L1 into
L1 and L3 and reblance across the two leafs. We end with:
+--------+ +--------+ +--------+
| L1 | | L3 | | L2 |
| fwd: 3 |---->| fwd: 2 |---->| fwd: 0 |
| bwd: 0 |<----| bwd: 1 |<----| bwd: 3 |
| fsp: M | | fsp: J | | fsp: N |
|--------| |--------| |--------|
| attr A | | attr X | | attr 1 |
|--------| +--------+ |--------|
| attr B | | attr 2 |
|--------| |--------|
.......... ..........
|--------| |--------|
| attr W | | attr n |
+--------+ +--------+
And we track that the original attribute is now at L3:0.
We then try to insert Y into L1 again, and find that there isn't
enough room because the new attribute is larger than the old one.
Hence we have to split again to make room for Y. We end up with
this:
+--------+ +--------+ +--------+ +--------+
| L1 | | L4 | | L3 | | L2 |
| fwd: 4 |---->| fwd: 3 |---->| fwd: 2 |---->| fwd: 0 |
| bwd: 0 |<----| bwd: 1 |<----| bwd: 4 |<----| bwd: 3 |
| fsp: M | | fsp: J | | fsp: J | | fsp: N |
|--------| |--------| |--------| |--------|
| attr A | | attr Y | | attr X | | attr 1 |
|--------| + INCOMP + +--------+ |--------|
| attr B | +--------+ | attr 2 |
|--------| |--------|
.......... ..........
|--------| |--------|
| attr W | | attr n |
+--------+ +--------+
And now we have the new (incomplete) attribute @ L4:0, and the
original attribute at L3:0. At this point, the first transaction is
committed, and we move to the flipping of the flags.
This is where we are supposed to end up with this:
+--------+ +--------+ +--------+ +--------+
| L1 | | L4 | | L3 | | L2 |
| fwd: 4 |---->| fwd: 3 |---->| fwd: 2 |---->| fwd: 0 |
| bwd: 0 |<----| bwd: 1 |<----| bwd: 4 |<----| bwd: 3 |
| fsp: M | | fsp: J | | fsp: J | | fsp: N |
|--------| |--------| |--------| |--------|
| attr A | | attr Y | | attr X | | attr 1 |
|--------| +--------+ + INCOMP + |--------|
| attr B | +--------+ | attr 2 |
|--------| |--------|
.......... ..........
|--------| |--------|
| attr W | | attr n |
+--------+ +--------+
But that doesn't happen properly - the attribute tracking indexes
are not pointing to the right locations. What we end up with is both
the old attribute to be removed pointing at L4:0 and the new
attribute at L4:1. On a debug kernel, this assert fails like so:
XFS: Assertion failed: args->index2 < be16_to_cpu(leaf2->hdr.count), file: fs/xfs/xfs_attr_leaf.c, line: 2725
because the new attribute location does not exist. On a production
kernel, this goes unnoticed and the code proceeds ahead merrily and
removes L4 because it thinks that is the block that is no longer
needed. This leaves the hash index node pointing to entries
L1, L4 and L2, but only blocks L1, L3 and L2 to exist. Further, the
leaf level sibling list is L1 <-> L4 <-> L2, but L4 is now free
space, and so everything is busted. This corruption is caused by the
removal of the old attribute triggering a join - it joins everything
correctly but then frees the wrong block.
xfs_repair will report something like:
bad sibling back pointer for block 4 in attribute fork for inode 131
problem with attribute contents in inode 131
would clear attr fork
bad nblocks 8 for inode 131, would reset to 3
bad anextents 4 for inode 131, would reset to 0
The problem lies in the assignment of the old/new blocks for
tracking purposes when the double leaf split occurs. The first split
tries to place the new attribute inside the current leaf (i.e.
"inleaf == true") and moves the old attribute (X) to the new block.
This sets up the old block/index to L1:X, and newly allocated
block to L3:0. It then moves attr X to the new block and tries to
insert attr Y at the old index. That fails, so it splits again.
With the second split, the rebalance ends up placing the new attr in
the second new block - L4:0 - and this is where the code goes wrong.
What is does is it sets both the new and old block index to the
second new block. Hence it inserts attr Y at the right place (L4:0)
but overwrites the current location of the attr to replace that is
held in the new block index (currently L3:0). It over writes it with
L4:1 - the index we later assert fail on.
Hopefully this table will show this in a foramt that is a bit easier
to understand:
Split old attr index new attr index
vanilla patched vanilla patched
before 1st L1:26 L1:26 N/A N/A
after 1st L3:0 L3:0 L1:26 L1:26
after 2nd L4:0 L3:0 L4:1 L4:0
^^^^ ^^^^
wrong wrong
The fix is surprisingly simple, for all this analysis - just stop
the rebalance on the out-of leaf case from overwriting the new attr
index - it's already correct for the double split case.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
|
|
For filesystems with only a single resource group, we need to be careful
that the allocation loop will not land up with a NULL resource group. This
fixes a bug in a previous patch where the gfs2_rgrpd_get_next() function
was being used instead of gfs2_rgrpd_get_first()
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Since we now have a dirty_inode that takes care of manipulating the
inode buffer and writing from the inode to the buffer, we can
eliminate some unnecessary buffer manipulations in gfs2_unlink_inode
that are now redundant.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch changes the gfs2_dir_add function so that it uses
the dirty_inode function (via mark_inode_dirty) rather than manually
updating the dinode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch fixes an issue relating to not having enough revokes
available when truncating journaled data files. In order to ensure
that we do no run out, the truncation is broken into separate pieces
if it is large enough.
Tested using fsx on a journaled data file.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
During a directory entry lookup of a hashed directory, if the
hash-based lookup functions fail and we fall back to a linear scan,
don't try to verify the dirent checksum on the internal nodes of the
hash tree because they don't store a checksum in a hidden dirent like
the leaf nodes do.
Reported-by: George Spelvin <linux@horizon.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The current code holds on to this list until nfsd is shut down, but it's
never touched once the grace period ends. Release that memory back into
the wild when the grace period ends.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Remove the cl_recdir field from the nfs4_client struct. Instead, just
compute it on the fly when and if it's needed, which is now only when
the legacy client tracking code is in effect.
The error handling in the legacy client tracker is also changed to
handle the case where md5 is unavailable. In that case, we'll warn
the admin with a KERN_ERR message and disable the client tracking.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The current code requires that we md5 hash the name in order to store
the client in the confirmed and unconfirmed trees. Change it instead
to store the clients in a pair of rbtrees, and simply compare the
cl_names directly instead of hashing them. This also necessitates that
we add a new flag to the clp->cl_flags field to indicate which tree
the client is currently in.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
When nfsd starts, the legacy reboot recovery code creates a tracking
struct for each directory in the v4recoverydir. When the grace period
ends, it basically does a "readdir" on the directory again, and matches
each dentry in there to an existing client id to see if it should be
removed or not. If the matching client doesn't exist, or hasn't
reclaimed its state then it will remove that dentry.
This is pretty inefficient since it involves doing a lot of hash-bucket
searching. It also means that we have to keep relying on being able to
search for a nfs4_client by md5 hashed cl_recdir name.
Instead, add a pointer to the nfs4_client that indicates the association
between the nfs4_client_reclaim and nfs4_client. When a reclaim operation
comes in, we set the pointer to make that association. On gracedone, the
legacy client tracker will keep the recdir around iff:
1/ there is a reclaim record for the directory
...and...
2/ there's an association between the reclaim record and a client record
-- that is, a create or check operation was performed on the client that
matches that directory.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
