| Age | Commit message (Collapse) | Author |
|---|
|
Set op->nr_iterations to -1 to indicate that we need to begin fileserver
iteration rather than setting error to SHRT_MAX. This makes it easier to
eliminate the address cursor.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
When processing the result of a call, handle the VIO and UAEIO abort
specifically rather than leaving it to a default case. Rather than
erroring out unconditionally, see if there's another server if the volume
has more than one server available, otherwise return -EREMOTEIO.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Rename the failed member of struct addr_list to probe_failed as it's
specifically related to probe failures.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
In the rotation algorithms for iterating over volume location servers and
file servers, don't skip servers from which we got a valid response to a
probe (either a reply DATA packet or an ABORT) even if we didn't manage to
get an RTT reading.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Change rxrpc's API such that:
(1) A new function, rxrpc_kernel_lookup_peer(), is provided to look up an
rxrpc_peer record for a remote address and a corresponding function,
rxrpc_kernel_put_peer(), is provided to dispose of it again.
(2) When setting up a call, the rxrpc_peer object used during a call is
now passed in rather than being set up by rxrpc_connect_call(). For
afs, this meenat passing it to rxrpc_kernel_begin_call() rather than
the full address (the service ID then has to be passed in as a
separate parameter).
(3) A new function, rxrpc_kernel_remote_addr(), is added so that afs can
get a pointer to the transport address for display purposed, and
another, rxrpc_kernel_remote_srx(), to gain a pointer to the full
rxrpc address.
(4) The function to retrieve the RTT from a call, rxrpc_kernel_get_srtt(),
is then altered to take a peer. This now returns the RTT or -1 if
there are insufficient samples.
(5) Rename rxrpc_kernel_get_peer() to rxrpc_kernel_call_get_peer().
(6) Provide a new function, rxrpc_kernel_get_peer(), to get a ref on a
peer the caller already has.
This allows the afs filesystem to pin the rxrpc_peer records that it is
using, allowing faster lookups and pointer comparisons rather than
comparing sockaddr_rxrpc contents. It also makes it easier to get hold of
the RTT. The following changes are made to afs:
(1) The addr_list struct's addrs[] elements now hold a peer struct pointer
and a service ID rather than a sockaddr_rxrpc.
(2) When displaying the transport address, rxrpc_kernel_remote_addr() is
used.
(3) The port arg is removed from afs_alloc_addrlist() since it's always
overridden.
(4) afs_merge_fs_addr4() and afs_merge_fs_addr6() do peer lookup and may
now return an error that must be handled.
(5) afs_find_server() now takes a peer pointer to specify the address.
(6) afs_find_server(), afs_compare_fs_alists() and afs_merge_fs_addr[46]{}
now do peer pointer comparison rather than address comparison.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Turn the afs_addr_list address array into an array of structs, thereby
allowing per-address (such as RTT) info to be added.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Add some comments on AFS abort code handling in the rotation algorithm and
adjust the errors produced to match.
Reported-by: Jeffrey E Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
David Howells says:
(3) afs_check_validity().
(4) afs_getattr().
These are both pretty short, so your solution is probably good for them.
That said, afs_vnode_commit_status() can spend a long time under the
write lock - and pretty much every file RPC op returns a status update.
Change these functions to use read_seqbegin(). This simplifies the code
and doesn't change the current behaviour, the "seq" counter is always even
so read_seqbegin_or_lock() can never take the lock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20231130115617.GA21584@redhat.com/
|
|
David Howells says:
(5) afs_find_server().
There could be a lot of servers in the list and each server can have
multiple addresses, so I think this would be better with an exclusive
second pass.
The server list isn't likely to change all that often, but when it does
change, there's a good chance several servers are going to be
added/removed one after the other. Further, this is only going to be
used for incoming cache management/callback requests from the server,
which hopefully aren't going to happen too often - but it is remotely
drivable.
(6) afs_find_server_by_uuid().
Similarly to (5), there could be a lot of servers to search through, but
they are in a tree not a flat list, so it should be faster to process.
Again, it's not likely to change that often and, again, when it does
change it's likely to involve multiple changes. This can be driven
remotely by an incoming cache management request but is mostly going to
be driven by setting up or reconfiguring a volume's server list -
something that also isn't likely to happen often.
Make the "seq" counter odd on the 2nd pass, otherwise read_seqbegin_or_lock()
never takes the lock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20231130115614.GA21581@redhat.com/
|
|
David Howells says:
(2) afs_lookup_volume_rcu().
There can be a lot of volumes known by a system. A thousand would
require a 10-step walk and this is drivable by remote operation, so I
think this should probably take a lock on the second pass too.
Make the "seq" counter odd on the 2nd pass, otherwise read_seqbegin_or_lock()
never takes the lock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20231130115606.GA21571@redhat.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are a small number of various driver fixes for 6.7-rc7 that
normally come through the char-misc tree, and one debugfs fix as well.
Included in here are:
- iio and hid sensor driver fixes for a number of small things
- interconnect driver fixes
- brcm_nvmem driver fixes
- debugfs fix for previous fix
- guard() definition in device.h so that many subsystems can start
using it for 6.8-rc1 (requested by Dan Williams to make future
merges easier)
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
debugfs: initialize cancellations earlier
Revert "iio: hid-sensor-als: Add light color temperature support"
Revert "iio: hid-sensor-als: Add light chromaticity support"
nvmem: brcm_nvram: store a copy of NVRAM content
dt-bindings: nvmem: mxs-ocotp: Document fsl,ocotp
driver core: Add a guard() definition for the device_lock()
interconnect: qcom: icc-rpm: Fix peak rate calculation
iio: adc: MCP3564: fix hardware identification logic
iio: adc: MCP3564: fix calib_bias and calib_scale range checks
iio: adc: meson: add separate config for axg SoC family
iio: adc: imx93: add four channels for imx93 adc
iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()
interconnect: qcom: sm8250: Enable sync_state
iio: triggered-buffer: prevent possible freeing of wrong buffer
iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
iio: imu: adis16475: use bit numbers in assign_bit()
iio: imu: adis16475: add spi_device_id table
iio: tmag5273: fix temperature offset
interconnect: Treat xlate() returning NULL node as an error
iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table
...
|
|
Assert that the file object is allocated in a backing_file container
so that file_user_path() could be used to display the user path and
not the backing file's path in /proc/<pid>/maps.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
There is not much in those helpers, but it makes sense to have them
logically next to the backing_file_{read,write}_iter() helpers as they
may grow more common logic in the future.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Overlayfs submits files io to backing files on other filesystems.
Factor out some common helpers to perform io to backing files, into
fs/backing-file.c.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/r/CAJfpeguhmZbjP3JLqtUy0AdWaHOkAPWeP827BBWwRFEAUgnUcQ@mail.gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
In preparation for factoring out some backing file io helpers from
overlayfs, move backing_file_open() into a new file fs/backing-file.c
and header.
Add a MAINTAINERS entry for stackable filesystems and add a Kconfig
FS_STACK which stackable filesystems need to select.
For now, the backing_file struct, the backing_file alloc/free functions
and the backing_file_real_path() accessor remain internal to file_table.c.
We may change that in the future.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
It was reported that when mounting the tracefs file system with a gid
other than root, the ownership did not carry down to the eventfs directory
due to the dynamic nature of it.
A fix was done to solve this, but it had two issues.
(a) if the attr passed into update_inode_attr() was NULL, it didn't do
anything. This is true for files that have not had a chown or chgrp
done to itself or any of its sibling files, as the attr is allocated
for all children when any one needs it.
# umount /sys/kernel/tracing
# mount -o rw,seclabel,relatime,gid=1000 -t tracefs nodev /mnt
# ls -ld /mnt/events/sched
drwxr-xr-x 28 root rostedt 0 Dec 21 13:12 /mnt/events/sched/
# ls -ld /mnt/events/sched/sched_switch
drwxr-xr-x 2 root rostedt 0 Dec 21 13:12 /mnt/events/sched/sched_switch/
But when checking the files:
# ls -l /mnt/events/sched/sched_switch
total 0
-rw-r----- 1 root root 0 Dec 21 13:12 enable
-rw-r----- 1 root root 0 Dec 21 13:12 filter
-r--r----- 1 root root 0 Dec 21 13:12 format
-r--r----- 1 root root 0 Dec 21 13:12 hist
-r--r----- 1 root root 0 Dec 21 13:12 id
-rw-r----- 1 root root 0 Dec 21 13:12 trigger
(b) When the attr does not denote the UID or GID, it defaulted to using
the parent uid or gid. This is incorrect as changing the parent
uid or gid will automatically change all its children.
# chgrp tracing /mnt/events/timer
# ls -ld /mnt/events/timer
drwxr-xr-x 2 root tracing 0 Dec 21 14:34 /mnt/events/timer
# ls -l /mnt/events/timer
total 0
-rw-r----- 1 root root 0 Dec 21 14:35 enable
-rw-r----- 1 root root 0 Dec 21 14:35 filter
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 hrtimer_cancel
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 hrtimer_expire_entry
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 hrtimer_expire_exit
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 hrtimer_init
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 hrtimer_start
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 itimer_expire
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 itimer_state
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 tick_stop
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 timer_cancel
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 timer_expire_entry
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 timer_expire_exit
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 timer_init
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 timer_start
At first it was thought that this could be easily fixed by just making the
default ownership of the superblock when it was mounted. But this does not
handle the case of:
# chgrp tracing instances
# mkdir instances/foo
If the superblock was used, then the group ownership would be that of what
it was when it was mounted, when it should instead be "tracing".
Instead, set a flag for the top level eventfs directory ("events") to flag
which eventfs_inode belongs to it.
Since the "events" directory's dentry and inode are never freed, it does
not need to use its attr field to restore its mode and ownership. Use the
this eventfs_inode's attr as the default ownership for all the files and
directories underneath it.
When the events eventfs_inode is created, it sets its ownership to its
parent uid and gid. As the events directory is created at boot up before
it gets mounted, this will always be uid=0 and gid=0. If it's created via
an instance, then it will take the ownership of the instance directory.
When the file system is mounted, it will update all the gids if one is
specified. This will have a callback to update the events evenfs_inode's
default entries.
When a file or directory is created under the events directory, it will
walk the ei->dentry parents until it finds the evenfs_inode that belongs
to the events directory to retrieve the default uid and gid values.
Link: https://lore.kernel.org/all/CAHk-=wiwQtUHvzwyZucDq8=Gtw+AnwScyLhpFswrQ84PjhoGsg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231221190757.7eddbca9@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Dongliang Cui <cuidongliang390@gmail.com>
Cc: Hongyu Jin <hongyu.jin@unisoc.com>
Fixes: 0dfc852b6fe3 ("eventfs: Have event files and directories default to parent uid and gid")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Tetsuo Handa pointed out that in the (now reverted)
lockdep commit I initialized the data too late. The
same is true for the cancellation data, it must be
initialized before the cmpxchg(), otherwise it may
be done twice and possibly even overwriting data in
there already when there's a race. Fix that, which
also requires destroying the mutex in case we lost
the race.
Fixes: 8c88a474357e ("debugfs: add API to allow debugfs operations cancellation")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20231221150444.1e47a0377f80.If7e8ba721ba2956f12c6e8405e7d61e154aa7ae7@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There isn't really much left in xfs_rtallocate_extent now, fold it into
the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
There are currently multiple levels of fall back if an RT allocation
can not be satisfied:
1) xfs_rtallocate_extent extends the minlen and reduces the maxlen due
to the extent size hint. If that can't be done, it return -ENOSPC
and let's xfs_bmap_rtalloc retry, which then not only drops the
extent size hint based alignment, but also the minlen adjustment
2) if xfs_rtallocate_extent gets -ENOSPC from the underlying functions,
it only drops the extent size hint based alignment and retries
3) if that still does not succeed, xfs_rtallocate_extent drops the
extent size hint (which is a complex no-op at this point) and the
minlen using the same code as (1) above
4) if that still doesn't success and the caller wanted an allocation
near a blkno, drop that blkno hint.
The handling in 1 is rather inefficient as we could just drop the
alignment and continue, and 2/3 interact in really weird ways due to
the duplicate policy.
Move aligning the min and maxlen out of xfs_rtallocate_extent and into
a helper called directly by xfs_bmap_rtalloc. This allows just
continuing with the allocation if we have to drop the alignment instead
of going through the retry loop and also dropping the perfectly usable
minlen adjustment that didn't cause the problem, and then just use
a single retry that drops both the minlen and alignment requirement
when we really are out of space, thus consolidating cases (2) and (3)
above.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_bmap_rtalloc is a bit of a mess in terms of calculating the locally
need variables. Reorder them a bit so that related code is located
next to each other - the raminlen calculation moves up next to where
the maximum len is calculated, and all the prod calculation is move
into a single place and rearranged so that the real prod calculation
only happens when it actually is needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Use the kernel min/max helpers instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_format.h has a bunch odd wrappers for helper functions and mount
structure access using RT* prefixes. Replace them with their open coded
versions (for those that weren't entirely unused) and remove the wrappers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_rtallocate_extent_size has two loops with nearly identical logic
in them. Split that logic into a separate xfs_rtalloc_sumlevel helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Use common code for both xfs_rtallocate_range calls by moving
the !isfree logic into the non-default branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Use a goto to use a common tail for the case of being able to allocate
an extent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Change polarity of a check so that the successful case of being able to
allocate an extent is in the main path of the function and error handling
is on a branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Doing a break in the else side of a conditional is rather silly. Invert
the check, break ASAP and unindent the other leg.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Inline the logic of xfs_rtmodify_summary_int into xfs_rtmodify_summary
and xfs_rtget_summary instead of having a somewhat awkward helper to
share a little bit of code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_rtmodify_summary_int is only used inside xfs_rtbitmap.c and to
implement xfs_rtget_summary. Move xfs_rtget_summary to xfs_rtbitmap.c
as the exported API and mark xfs_rtmodify_summary_int static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Clean up the logical in xfs_bmap_rtalloc that tries to find a rtextent
to start the search from by using a separate variable for the hint, not
calling xfs_bmap_adjacent when we want to ignore the locality and avoid
an extra roundtrip converting between block numbers and RT extent
numbers.
As a side-effect this doesn't pointlessly call xfs_rtpick_extent and
increment the start rtextent hint if we are going to ignore the result
anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Add a return value to xfs_bmap_adjacent to indicate if it did change
ap->blkno or not.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Reorder the tail end of xfs_bmap_rtalloc so that the successfully
allocation is in the main path, and the error handling is on a branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Just return -ENOSPC instead of returning 0 and setting the return rt
extent number to NULLRTEXTNO. This is turn removes all users of
NULLRTEXTNO, so remove that as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_bmap_rtalloc is currently in xfs_bmap_util.c, which is a somewhat
odd spot for it, given that is only called from xfs_bmap.c and calls
into xfs_rtalloc.c to do the actual work. Move xfs_bmap_rtalloc to
xfs_rtalloc.c and mark xfs_rtpick_extent xfs_rtallocate_extent and
xfs_rtallocate_extent static now that they aren't called from outside
of xfs_rtalloc.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Make xfs_bmap_btalloc_accounting more generic by handling the RT quota
reservations and then also use it from xfs_bmap_rtalloc instead of
open coding the accounting logic there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_bmap_btalloc_accounting only uses the len field from args, but that
has just been propagated to ap->length field by the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Without this upcoming change can cause an unused variable warning,
when adding a local variable for the fields field passed to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
minlen is the lower bound on the extent length that the caller can
accept, and maxlen is at this point the maximal available length.
This means a minlen extent is perfectly fine to use, so do it. This
matches the equivalent logic in xfs_rtallocate_extent_exact that also
accepts a minlen sized extent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
remove the second ones:
\#include "xfs_trans_resv.h"
\#include "xfs_mount.h"
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
During growfs, if new ag in memory has been initialized, however
sb_agcount has not been updated, if an error occurs at this time it
will cause perag leaks as follows, these new AGs will not been freed
during umount , because of these new AGs are not visible(that is
included in mp->m_sb.sb_agcount).
unreferenced object 0xffff88810be40200 (size 512):
comm "xfs_growfs", pid 857, jiffies 4294909093
hex dump (first 32 bytes):
00 c0 c1 05 81 88 ff ff 04 00 00 00 00 00 00 00 ................
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 381741e2):
[<ffffffff8191aef6>] __kmalloc+0x386/0x4f0
[<ffffffff82553e65>] kmem_alloc+0xb5/0x2f0
[<ffffffff8238dac5>] xfs_initialize_perag+0xc5/0x810
[<ffffffff824f679c>] xfs_growfs_data+0x9bc/0xbc0
[<ffffffff8250b90e>] xfs_file_ioctl+0x5fe/0x14d0
[<ffffffff81aa5194>] __x64_sys_ioctl+0x144/0x1c0
[<ffffffff83c3d81f>] do_syscall_64+0x3f/0xe0
[<ffffffff83e00087>] entry_SYSCALL_64_after_hwframe+0x62/0x6a
unreferenced object 0xffff88810be40800 (size 512):
comm "xfs_growfs", pid 857, jiffies 4294909093
hex dump (first 32 bytes):
20 00 00 00 00 00 00 00 57 ef be dc 00 00 00 00 .......W.......
10 08 e4 0b 81 88 ff ff 10 08 e4 0b 81 88 ff ff ................
backtrace (crc bde50e2d):
[<ffffffff8191b43a>] __kmalloc_node+0x3da/0x540
[<ffffffff81814489>] kvmalloc_node+0x99/0x160
[<ffffffff8286acff>] bucket_table_alloc.isra.0+0x5f/0x400
[<ffffffff8286bdc5>] rhashtable_init+0x405/0x760
[<ffffffff8238dda3>] xfs_initialize_perag+0x3a3/0x810
[<ffffffff824f679c>] xfs_growfs_data+0x9bc/0xbc0
[<ffffffff8250b90e>] xfs_file_ioctl+0x5fe/0x14d0
[<ffffffff81aa5194>] __x64_sys_ioctl+0x144/0x1c0
[<ffffffff83c3d81f>] do_syscall_64+0x3f/0xe0
[<ffffffff83e00087>] entry_SYSCALL_64_after_hwframe+0x62/0x6a
Factor out xfs_free_unused_perag_range() from xfs_initialize_perag(),
used for freeing unused perag within a specified range in error handling,
included in the error path of the growfs failure.
Fixes: 1c1c6ebcf528 ("xfs: Replace per-ag array with a radix tree")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Take mp->m_perag_lock for deletions from the perag radix tree in
xfs_initialize_perag to prevent racing with tagging operations.
Lookups are fine - they are RCU protected so already deal with the
tree changing shape underneath the lookup - but tagging operations
require the tree to be stable while the tags are propagated back up
to the root.
Right now there's nothing stopping radix tree tagging from operating
while a growfs operation is progress and adding/removing new entries
into the radix tree.
Hence we can have traversals that require a stable tree occurring at
the same time we are removing unused entries from the radix tree which
causes the shape of the tree to change.
Likely this hasn't caused a problem in the past because we are only
doing append addition and removal so the active AG part of the tree
is not changing shape, but that doesn't mean it is safe. Just making
the radix tree modifications serialise against each other is obviously
correct.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When overwriting and splitting existing extents, we weren't correctly
accounting for a 3 way split of a compressed extent.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
A freezable kernel thread can enter frozen state during freezing by
either calling try_to_freeze() or using wait_event_freezable() and its
variants. So for the following snippet of code in a kernel thread loop:
try_to_freeze();
wait_event_interruptible_timeout();
We can change it to a simple wait_event_freezable_timeout() and then
eliminate a function call.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The kernel thread function gfs2_logd() and gfs2_quotad() invoke the
try_to_freeze() in its loop. But all the kernel threads are no-freezable
by default. So if we want to make a kernel thread to be freezable,
we have to invoke set_freezable() explicitly.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
23c93c3b6275 ("bnxt_en: do not map packet buffers twice")
6d1add95536b ("bnxt_en: Modify TX ring indexing logic.")
tools/testing/selftests/net/Makefile
2258b666482d ("selftests: add vlan hw filter tests")
a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When an afs_volume struct is put, its refcount is reduced to 0 before
the cell->volume_lock is taken and the volume removed from the
cell->volumes tree.
Unfortunately, this means that the lookup code can race and see a volume
with a zero ref in the tree, resulting in a use-after-free:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda
...
RIP: 0010:refcount_warn_saturate+0x7a/0xda
...
Call Trace:
afs_get_volume+0x3d/0x55
afs_create_volume+0x126/0x1de
afs_validate_fc+0xfe/0x130
afs_get_tree+0x20/0x2e5
vfs_get_tree+0x1d/0xc9
do_new_mount+0x13b/0x22e
do_mount+0x5d/0x8a
__do_sys_mount+0x100/0x12a
do_syscall_64+0x3a/0x94
entry_SYSCALL_64_after_hwframe+0x62/0x6a
Fix this by:
(1) When putting, use a flag to indicate if the volume has been removed
from the tree and skip the rb_erase if it has.
(2) When looking up, use a conditional ref increment and if it fails
because the refcount is 0, replace the node in the tree and set the
removal flag.
Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In afs_update_cell(), ret is the result of the DNS lookup and the errors
are to be handled by a switch - however, the value gets clobbered in
between by setting it to -ENOMEM in case afs_alloc_vlserver_list()
fails.
Fix this by moving the setting of -ENOMEM into the error handling for
OOM failure. Further, only do it if we don't have an alternative error
to return.
Found by Linux Verification Center (linuxtesting.org) with SVACE. Based
on a patch from Anastasia Belova [1].
Fixes: d5c32c89b208 ("afs: Fix cell DNS lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Anastasia Belova <abelova@astralinux.ru>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: lvc-project@linuxtesting.org
Link: https://lore.kernel.org/r/20231221085849.1463-1-abelova@astralinux.ru/ [1]
Link: https://lore.kernel.org/r/1700862.1703168632@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
orangefs_dir_fill() doesn't use oi and dentry arguments at all
do_readdir() gets dentry, uses only dentry->d_inode; it also
gets oi, which is ORANGEFS_I(dentry->d_inode) (i.e. ->d_inode -
constant offset).
orangefs_dir_mode() gets dentry and oi, uses only to pass those
to do_readdir().
orangefs_dir_iterate() uses dentry and oi only to pass those to
orangefs_dir_fill() and orangefs_dir_more().
The only thing it really needs is ->d_inode; moreover, that's
better expressed as file_inode(file) - no need to go through
->f_path.dentry->d_inode.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
